aboutsummaryrefslogtreecommitdiffstats
path: root/scripts/om-fwupgradecfg-gen.sh
diff options
context:
space:
mode:
authorMarek Lindner <marek.lindner@kaiwoo.ai>2018-11-25 21:46:54 +0800
committerPetr Štetiar <ynezz@true.cz>2020-12-22 19:11:50 +0100
commitea5bb6bbfee06f44f714aff40c8929505face221 (patch)
treec3ae619246530a997fffbc38ffde4a2e80b357e7 /scripts/om-fwupgradecfg-gen.sh
parent8a891bfaa01d9592ea86c6b0cbbd5c04688c09f8 (diff)
downloadupstream-ea5bb6bbfee06f44f714aff40c8929505face221.tar.gz
upstream-ea5bb6bbfee06f44f714aff40c8929505face221.tar.bz2
upstream-ea5bb6bbfee06f44f714aff40c8929505face221.zip
ipq40xx: add support for Plasma Cloud PA1200
Device specifications: * QCA IPQ4018 * 256 MB of RAM * 32 MB of SPI NOR flash (w25q256) - 2x 15 MB available; but one of the 15 MB regions is the recovery image * 2T2R 2.4 GHz - QCA4019 hw1.0 (SoC) - requires special BDF in QCA4019/hw1.0/board-2.bin with bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=PlasmaCloud-PA1200 * 2T2R 5 GHz - QCA4019 hw1.0 (SoC) - requires special BDF in QCA4019/hw1.0/board-2.bin with bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=PlasmaCloud-PA1200 * 3x GPIO-LEDs for status (cyan, purple, yellow) * 1x GPIO-button (reset) * 1x USB (xHCI) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x gigabit ethernet - phy@mdio4: + Label: Ethernet 1 + gmac0 (ethaddr) in original firmware + used as LAN interface - phy@mdio3: + Label: Ethernet 2 + gmac1 (eth1addr) in original firmware + 802.3af/at POE(+) + used as WAN interface * 12V/24V 1A DC Flashing instructions: The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the factory image to the u-boot when the device boots up. Signed-off-by: Marek Lindner <marek.lindner@kaiwoo.ai> [sven@narfation.org: prepare commit message, rebase, use all LEDs, switch to dualboot_datachk upgrade script, use eth1 as designated WAN interface] Signed-off-by: Sven Eckelmann <sven@narfation.org>
Diffstat (limited to 'scripts/om-fwupgradecfg-gen.sh')
-rwxr-xr-xscripts/om-fwupgradecfg-gen.sh4
1 files changed, 2 insertions, 2 deletions
diff --git a/scripts/om-fwupgradecfg-gen.sh b/scripts/om-fwupgradecfg-gen.sh
index 98464c631b..c5dcfb0018 100755
--- a/scripts/om-fwupgradecfg-gen.sh
+++ b/scripts/om-fwupgradecfg-gen.sh
@@ -7,7 +7,7 @@
#
usage() {
- echo "Usage: $0 <OM2P|OM5P|OM5PAC|MR600|MR900|MR1750|A60|A42|A62|PA300> <out file path> <kernel path> <rootfs path>"
+ echo "Usage: $0 <OM2P|OM5P|OM5PAC|MR600|MR900|MR1750|A60|A42|A62|PA300|PA1200> <out file path> <kernel path> <rootfs path>"
rm -f $CFG_OUT
exit 1
}
@@ -33,7 +33,7 @@ case $CE_TYPE in
SIZE_FACTOR=1
SIZE_FORMAT="%d"
;;
- A42)
+ A42|PA1200)
MAX_PART_SIZE=15616
KERNEL_FLASH_ADDR=0x180000
SIZE_FACTOR=1024