diff options
| author | Victorien Molle <victorien.molle@wifirst.fr> | 2021-08-20 21:41:19 +0200 |
|---|---|---|
| committer | David Bauer <mail@david-bauer.net> | 2022-01-22 01:17:16 +0100 |
| commit | af8a059bb41dd7afee49ce9a5d52e9a8e010bbd8 (patch) | |
| tree | 17cbb21468fcc4318e8507a85773df86f09947f1 /package/utils | |
| parent | 7c8ade1765fa283c253d7c29165be77fcd6a1ff0 (diff) | |
| download | upstream-af8a059bb41dd7afee49ce9a5d52e9a8e010bbd8.tar.gz upstream-af8a059bb41dd7afee49ce9a5d52e9a8e010bbd8.tar.bz2 upstream-af8a059bb41dd7afee49ce9a5d52e9a8e010bbd8.zip | |
ath79: add support for GL.iNet GL-XE300
The GL.iNet GL-XE300 is a 4G LTE Wireless router, based on QCA9531 SoC.
Specifications:
- SoC: QCA9531 (650MHz)
- RAM: DDR2 128M
- Flash: SPI NOR 16M + SPI NAND 128M
- WiFi: 2.4GHz with 2 antennas
- Ethernet:
- 1x LAN (10/100M)
- 1x WAN (10/100M)
- LTE:
- USB: 1x USB 2.0 port
- UART:
- 3.3V, TX, RX, GND / 115200 8N1
MAC addresses as verified by OEM firmware:
use address source
LAN *:c5 art 0x0 (label)
WAN *:c6 label + 1
WLAN *:c7 art 0x1002
Installation via U-Boot rescue:
1. Press and hold reset and power buttons simultaneously
2. Wait for the LAN led to blink 5 times
3. Release reset and power buttons
4. The rescue page is accessible via http://192.168.1.1
5. Select the OpenWrt factory image and start upgrade
6. Wait for the router to flash new firmware and reboot
Revert to stock firmware:
i. Download the stock firmware from GL.Inet website
ii. Use the same method explained above to flash the stock firmware
Signed-off-by: Victorien Molle <victorien.molle@wifirst.fr>
[update commit message]
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'package/utils')
0 files changed, 0 insertions, 0 deletions