* rework the arcadyan sku support * adds a few new boards and switches

SVN-Revision: 25273

1 files changed, 406 insertions, 0 deletions

diff --git a/package/uboot-lantiq/files/board/arcadyan/board.c b/package/uboot-lantiq/files/board/arcadyan/board.c
new file mode 100644
index 0000000000..cf0cbce7d6
--- /dev/null
+++ b/package/uboot-lantiq/files/board/arcadyan/board.c
@@ -0,0 +1,406 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2010
+ * Thomas Langer, Ralph Hempel
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <netdev.h>
+#include <miiphy.h>
+#include <asm/addrspace.h>
+#include <asm/danube.h>
+#include <asm/reboot.h>
+#include <asm/io.h>
+#if defined(CONFIG_CMD_HTTPD)
+#include <httpd.h>
+#endif
+#if defined(CONFIG_PCI)
+#include <pci.h>
+#endif
+#if defined(CONFIG_AR8216_SWITCH)
+#include "athrs26_phy.h"
+#endif
+
+extern ulong ifx_get_ddr_hz(void);
+extern ulong ifx_get_cpuclk(void);
+
+/* IDs and registers of known external switches */
+void _machine_restart(void)
+{
+	*DANUBE_RCU_RST_REQ |=1<<30;
+}
+
+#ifdef CONFIG_SYS_RAMBOOT
+phys_size_t initdram(int board_type)
+{
+	return get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM);
+}
+#elif defined(CONFIG_USE_DDR_RAM)
+phys_size_t initdram(int board_type)
+{
+	return (CONFIG_SYS_MAX_RAM);
+}
+#else
+
+static ulong max_sdram_size(void)     /* per Chip Select */
+{
+	/* The only supported SDRAM data width is 16bit.
+	 */
+#define CFG_DW	4
+
+	/* The only supported number of SDRAM banks is 4.
+	 */
+#define CFG_NB	4
+
+	ulong cfgpb0 = *DANUBE_SDRAM_MC_CFGPB0;
+	int   cols   = cfgpb0 & 0xF;
+	int   rows   = (cfgpb0 & 0xF0) >> 4;
+	ulong size   = (1 << (rows + cols)) * CFG_DW * CFG_NB;
+
+	return size;
+}
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'.
+ */
+
+static long int dram_size(long int *base, long int maxsize)
+{
+	volatile long int *addr;
+	ulong cnt, val;
+	ulong save[32];			/* to make test non-destructive */
+	unsigned char i = 0;
+
+	for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		save[i++] = *addr;
+		*addr = ~cnt;
+	}
+
+	/* write 0 to base address */
+	addr = base;
+	save[i] = *addr;
+	*addr = 0;
+
+	/* check at base address */
+	if ((val = *addr) != 0) {
+		*addr = save[i];
+		return (0);
+	}
+
+	for (cnt = 1; cnt < maxsize / sizeof (long); cnt <<= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		val = *addr;
+		*addr = save[--i];
+
+		if (val != (~cnt)) {
+			return (cnt * sizeof (long));
+		}
+	}
+	return (maxsize);
+}
+
+phys_size_t initdram(int board_type)
+{
+	int   rows, cols, best_val = *DANUBE_SDRAM_MC_CFGPB0;
+	ulong size, max_size       = 0;
+	ulong our_address;
+
+	/* load t9 into our_address */
+	asm volatile ("move %0, $25" : "=r" (our_address) :);
+
+	/* Can't probe for RAM size unless we are running from Flash.
+	 * find out whether running from DRAM or Flash.
+	 */
+	if (CPHYSADDR(our_address) < CPHYSADDR(PHYS_FLASH_1))
+	{
+		return max_sdram_size();
+	}
+
+	for (cols = 0x8; cols <= 0xC; cols++)
+	{
+		for (rows = 0xB; rows <= 0xD; rows++)
+		{
+			*DANUBE_SDRAM_MC_CFGPB0 = (0x14 << 8) |
+			                          (rows << 4) | cols;
+			size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
+			                          max_sdram_size());
+
+			if (size > max_size)
+			{
+				best_val = *DANUBE_SDRAM_MC_CFGPB0;
+				max_size = size;
+			}
+		}
+	}
+
+	*DANUBE_SDRAM_MC_CFGPB0 = best_val;
+	return max_size;
+}
+#endif
+
+static void gpio_default(void)
+{
+#ifdef CONFIG_SWITCH_PORT0
+	*DANUBE_GPIO_P0_ALTSEL0 &= ~(1<<CONFIG_SWITCH_PIN);
+	*DANUBE_GPIO_P0_ALTSEL1 &= ~(1<<CONFIG_SWITCH_PIN);
+	*DANUBE_GPIO_P0_OD |= (1<<CONFIG_SWITCH_PIN);
+	*DANUBE_GPIO_P0_DIR |= (1<<CONFIG_SWITCH_PIN);
+	*DANUBE_GPIO_P0_OUT |= (1<<CONFIG_SWITCH_PIN);
+#elif defined(CONFIG_SWITCH_PORT1)
+	*DANUBE_GPIO_P1_ALTSEL0 &= ~(1<<CONFIG_SWITCH_PIN);
+	*DANUBE_GPIO_P1_ALTSEL1 &= ~(1<<CONFIG_SWITCH_PIN);
+	*DANUBE_GPIO_P1_OD |= (1<<CONFIG_SWITCH_PIN);
+	*DANUBE_GPIO_P1_DIR |= (1<<CONFIG_SWITCH_PIN);
+	*DANUBE_GPIO_P1_OUT |= (1<<CONFIG_SWITCH_PIN);
+#endif
+#ifdef CONFIG_EBU_GPIO
+	{
+		int i = 0;
+		printf ("bring up ebu gpio\n");
+		*DANUBE_EBU_BUSCON1 = 0x1e7ff;
+		*DANUBE_EBU_ADDSEL1 = 0x14000001;
+
+		*((volatile u16*)0xb4000000) = 0x0;
+		for(i = 0; i < 1000; i++)
+			udelay(1000);
+		*((volatile u16*)0xb4000000) = CONFIG_EBU_GPIO;
+		*DANUBE_EBU_BUSCON1 = 0x8001e7ff;
+	}
+#endif
+#ifdef CONFIG_BUTTON_PORT0
+	*DANUBE_GPIO_P0_ALTSEL0 &= ~(1<<CONFIG_BUTTON_PIN);
+	*DANUBE_GPIO_P0_ALTSEL1 &= ~(1<<CONFIG_BUTTON_PIN);
+	*DANUBE_GPIO_P0_DIR &= ~(1<<CONFIG_BUTTON_PIN);
+	if(!!(*DANUBE_GPIO_P0_IN & (1<<CONFIG_BUTTON_PIN)) == CONFIG_BUTTON_LEVEL)
+	{
+		printf("button is pressed\n");
+		setenv("bootdelay", "0");
+		setenv("bootcmd", "httpd");
+	}
+#elif defined(CONFIG_BUTTON_PORT1)
+	*DANUBE_GPIO_P1_ALTSEL0 &= ~(1<<CONFIG_BUTTON_PIN);
+	*DANUBE_GPIO_P1_ALTSEL1 &= ~(1<<CONFIG_BUTTON_PIN);
+	*DANUBE_GPIO_P1_DIR &= ~(1<<CONFIG_BUTTON_PIN);
+	if(!!(*DANUBE_GPIO_P1_IN & (1<<CONFIG_BUTTON_PIN)) == CONFIG_BUTTON_LEVEL)
+	{
+		printf("button is pressed\n");
+		setenv("bootdelay", "0");
+		setenv("bootcmd", "httpd");
+	}
+#endif
+
+}
+
+int checkboard (void)
+{
+	unsigned long chipid = *DANUBE_MPS_CHIPID;
+	int part_num;
+
+	puts ("Board: "CONFIG_ARCADYAN"\n");
+	puts ("SoC: ");
+
+	part_num = DANUBE_MPS_CHIPID_PARTNUM_GET(chipid);
+	switch (part_num)
+	{
+	case 0x129:
+	case 0x12D:
+	case 0x12b: 
+		puts("Danube/Twinpass/Vinax-VE ");
+		break;
+	default:
+		printf ("unknown, chip part number 0x%03X ", part_num);
+		break;
+	}
+	printf ("V1.%ld, ", DANUBE_MPS_CHIPID_VERSION_GET(chipid));
+
+	printf("DDR Speed %ld MHz, ", ifx_get_ddr_hz()/1000000);
+	printf("CPU Speed %ld MHz\n", ifx_get_cpuclk()/1000000);
+
+
+	return 0;
+}
+
+#ifdef CONFIG_SKIP_LOWLEVEL_INIT
+int board_early_init_f(void)
+{
+#ifdef CONFIG_EBU_ADDSEL0
+	(*DANUBE_EBU_ADDSEL0) = CONFIG_EBU_ADDSEL0;
+#endif
+#ifdef CONFIG_EBU_ADDSEL1
+	(*DANUBE_EBU_ADDSEL1) = CONFIG_EBU_ADDSEL1;
+#endif
+#ifdef CONFIG_EBU_ADDSEL2
+	(*DANUBE_EBU_ADDSEL2) = CONFIG_EBU_ADDSEL2;
+#endif
+#ifdef CONFIG_EBU_ADDSEL3
+	(*DANUBE_EBU_ADDSEL3) = CONFIG_EBU_ADDSEL3;
+#endif
+#ifdef CONFIG_EBU_BUSCON0
+	(*DANUBE_EBU_BUSCON0) = CONFIG_EBU_BUSCON0;
+#endif
+#ifdef CONFIG_EBU_BUSCON1
+	(*DANUBE_EBU_BUSCON1) = CONFIG_EBU_BUSCON1;
+#endif
+#ifdef CONFIG_EBU_BUSCON2
+	(*DANUBE_EBU_BUSCON2) = CONFIG_EBU_BUSCON2;
+#endif
+#ifdef CONFIG_EBU_BUSCON3
+	(*DANUBE_EBU_BUSCON3) = CONFIG_EBU_BUSCON3;
+#endif
+
+	return 0;
+}
+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
+
+#ifdef CONFIG_RTL8306_SWITCH
+#define ID_RTL8306	0x5988
+static int external_switch_rtl8306(void)
+{
+	unsigned short chipid;
+	static char * const name = "lq_cpe_eth";
+
+	udelay(100000);
+
+	puts("\nsearching for rtl8306 switch ... ");
+	if (miiphy_read(name, 4, 30, &chipid) == 0) {
+		if (chipid == ID_RTL8306) {
+			puts("found");
+			/* set led mode */
+			miiphy_write(name, 0, 19, 0xffff);
+			/* magic */
+			miiphy_write(name, 4, 22, 0x877f);
+			puts("\n");
+			return 0;
+		}
+		puts("failed\n");
+	}
+	puts("\nno known switch found ... \n");
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_AR8216_SWITCH
+static int external_switch_ar8216(void)
+{
+	puts("initializing ar8216 switch... ");
+	if (athrs26_phy_setup(0)==0) {
+	   printf("initialized\n");
+	   return 0;
+	}
+	puts("failed ... \n");
+	return 0;
+}
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+	gpio_default();
+
+#if defined(CONFIG_IFX_ETOP)
+	uchar enetaddr[6];
+	if (!eth_getenv_enetaddr("ethaddr", enetaddr))
+               eth_setenv_enetaddr("ethaddr", (uchar *)0xb03f0016);
+
+	*DANUBE_PMU_PWDCR &= 0xFFFFEFDF;
+	*DANUBE_PMU_PWDCR &=~(1<<DANUBE_PMU_DMA_SHIFT);/*enable DMA from PMU*/
+
+	if (lq_eth_initialize(bis))
+		return -1;
+
+	*DANUBE_RCU_RST_REQ |=1;
+	udelay(200000);
+	*DANUBE_RCU_RST_REQ &=(unsigned long)~1;
+	udelay(1000);
+
+#ifdef CONFIG_RTL8306_SWITCH
+	if (external_switch_rtl8306()<0)
+		return -1;
+#endif
+#ifdef CONFIG_AR8216_SWITCH
+	if (external_switch_ar8216()<0)
+		return -1;
+#endif
+#endif
+	return 0;
+}
+
+#if defined(CONFIG_CMD_HTTPD)
+int do_http_upgrade(const unsigned char *data, const ulong size)
+{
+	char buf[128];
+
+	if(getenv ("ram_addr") == NULL)
+		return -1;
+	if(getenv ("kernel_addr") == NULL)
+		return -1;
+	/* check the image */
+	if(run_command("imi ${ram_addr}", 0) < 0) {
+		return -1;
+	}
+	/* write the image to the flash */
+	puts("http ugrade ...\n");
+	sprintf(buf, "era ${kernel_addr} +0x%lx; cp.b ${ram_addr} ${kernel_addr} 0x%lx", size, size);
+	return run_command(buf, 0);
+}
+
+int do_http_progress(const int state)
+{
+	/* toggle LED's here */
+	switch(state) {
+		case HTTP_PROGRESS_START:
+		puts("http start\n");
+		break;
+		case HTTP_PROGRESS_TIMEOUT:
+		puts(".");
+		break;
+		case HTTP_PROGRESS_UPLOAD_READY:
+		puts("http upload ready\n");
+		break;
+		case HTTP_PROGRESS_UGRADE_READY:
+		puts("http ugrade ready\n");
+		break;
+		case HTTP_PROGRESS_UGRADE_FAILED:
+		puts("http ugrade failed\n");
+		break;
+	}
+	return 0;
+}
+
+unsigned long do_http_tmp_address(void)
+{
+	char *s = getenv ("ram_addr");
+	if (s) {
+		ulong tmp = simple_strtoul (s, NULL, 16);
+		return tmp;
+	}
+	return 0 /*0x80a00000*/;
+}
+
+#endif