iw: update to 3.17

Patch by Bryan Forbes <bryan@reigndropsfall.net>

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44654

4 files changed, 607 insertions, 373 deletions

diff --git a/package/network/utils/iw/Makefile b/package/network/utils/iw/Makefile
index 62a88e8e17..e6054950ca 100644
--- a/package/network/utils/iw/Makefile
+++ b/package/network/utils/iw/Makefile
@@ -8,12 +8,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=iw
-PKG_VERSION:=3.15
+PKG_VERSION:=3.17
 PKG_RELEASE:=1
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
 PKG_SOURCE_URL:=https://www.kernel.org/pub/software/network/iw
-PKG_MD5SUM:=3b77ad7ec44a865a3bb2ab6c1c463bba
+PKG_MD5SUM:=69c4a2f29cf560247febc6cad7161a72
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@openwrt.org>
 PKG_LICENSE:=GPL-2.0
diff --git a/package/network/utils/iw/patches/001-nl80211_h_sync.patch b/package/network/utils/iw/patches/001-nl80211_h_sync.patch
index 64e33054ec..03a3d38c66 100644
--- a/package/network/utils/iw/patches/001-nl80211_h_sync.patch
+++ b/package/network/utils/iw/patches/001-nl80211_h_sync.patch
@@ -1,344 +1,672 @@
 --- a/nl80211.h
 +++ b/nl80211.h
-@@ -503,6 +503,9 @@
-  *	TX status event pertaining to the TX request.
-  *	%NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
-  *	management frames at CCK rate or not in 2GHz band.
-+ *	%NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA
-+ *	counters which will be updated to the current value. This attribute
-+ *	is used during CSA period.
-  * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
-  *	command may be used with the corresponding cookie to cancel the wait
-  *	time if it is known that it is no longer necessary.
-@@ -719,6 +722,22 @@
-  *	QoS mapping is relevant for IP packets, it is only valid during an
-  *	association. This is cleared on disassociation and AP restart.
+@@ -25,10 +25,30 @@
   *
-+ * @NL80211_CMD_ADD_TX_TS: Ask the kernel to add a traffic stream for the given
-+ *	%NL80211_ATTR_TSID and %NL80211_ATTR_MAC with %NL80211_ATTR_USER_PRIO
-+ *	and %NL80211_ATTR_ADMITTED_TIME parameters.
-+ *	Note that the action frame handshake with the AP shall be handled by
-+ *	userspace via the normal management RX/TX framework, this only sets
-+ *	up the TX TS in the driver/device.
-+ *	If the admitted time attribute is not added then the request just checks
-+ *	if a subsequent setup could be successful, the intent is to use this to
-+ *	avoid setting up a session with the AP when local restrictions would
-+ *	make that impossible. However, the subsequent "real" setup may still
-+ *	fail even if the check was successful.
-+ * @NL80211_CMD_DEL_TX_TS: Remove an existing TS with the %NL80211_ATTR_TSID
-+ *	and %NL80211_ATTR_MAC parameters. It isn't necessary to call this
-+ *	before removing a station entry entirely, or before disassociating
-+ *	or similar, cleanup will happen in the driver/device in this case.
+  */
+ 
++/*
++ * This header file defines the userspace API to the wireless stack. Please
++ * be careful not to break things - i.e. don't move anything around or so
++ * unless you can demonstrate that it breaks neither API nor ABI.
++ *
++ * Additions to the API should be accompanied by actual implementations in
++ * an upstream driver, so that example implementations exist in case there
++ * are ever concerns about the precise semantics of the API or changes are
++ * needed, and to ensure that code for dead (no longer implemented) API
++ * can actually be identified and removed.
++ * Nonetheless, semantics should also be documented carefully in this file.
++ */
++
+ #include <linux/types.h>
+ 
+ #define NL80211_GENL_NAME "nl80211"
+ 
++#define NL80211_MULTICAST_GROUP_CONFIG		"config"
++#define NL80211_MULTICAST_GROUP_SCAN		"scan"
++#define NL80211_MULTICAST_GROUP_REG		"regulatory"
++#define NL80211_MULTICAST_GROUP_MLME		"mlme"
++#define NL80211_MULTICAST_GROUP_VENDOR		"vendor"
++#define NL80211_MULTICAST_GROUP_TESTMODE	"testmode"
++
+ /**
+  * DOC: Station handling
+  *
+@@ -173,8 +193,8 @@
+  *	%NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
+  *
+  * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
+- *	either a dump request on a %NL80211_ATTR_WIPHY or a specific get
+- *	on an %NL80211_ATTR_IFINDEX is supported.
++ *	either a dump request for all interfaces or a specific get with a
++ *	single %NL80211_ATTR_IFINDEX is supported.
+  * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
+  *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
+  * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
+@@ -227,7 +247,11 @@
+  *	the interface identified by %NL80211_ATTR_IFINDEX.
+  * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
+  *	or, if no MAC address given, all stations, on the interface identified
+- *	by %NL80211_ATTR_IFINDEX.
++ *	by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and
++ *	%NL80211_ATTR_REASON_CODE can optionally be used to specify which type
++ *	of disconnection indication should be sent to the station
++ *	(Deauthentication or Disassociation frame and reason code for that
++ *	frame).
+  *
+  * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
+  * 	destination %NL80211_ATTR_MAC on the interface identified by
+@@ -248,7 +272,18 @@
+  *	%NL80211_ATTR_IFINDEX.
+  *
+  * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
+- * 	regulatory domain.
++ *	regulatory domain. If %NL80211_ATTR_WIPHY is specified and the device
++ *	has a private regulatory domain, it will be returned. Otherwise, the
++ *	global regdomain will be returned.
++ *	A device will have a private regulatory domain if it uses the
++ *	regulatory_hint() API. Even when a private regdomain is used the channel
++ *	information will still be mended according to further hints from
++ *	the regulatory core to help with compliance. A dump version of this API
++ *	is now available which will returns the global regdomain as well as
++ *	all private regdomains of present wiphys (for those that have it).
++ *	If a wiphy is self-managed (%NL80211_ATTR_WIPHY_SELF_MANAGED_REG), then
++ *	its private regdomain is the only valid one for it. The regulatory
++ *	core is not used to help with compliance in this case.
+  * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
+  *	after being queried by the kernel. CRDA replies by sending a regulatory
+  *	domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
+@@ -302,7 +337,9 @@
+  *	if passed, define which channels should be scanned; if not
+  *	passed, all channels allowed for the current regulatory domain
+  *	are used.  Extra IEs can also be passed from the userspace by
+- *	using the %NL80211_ATTR_IE attribute.
++ *	using the %NL80211_ATTR_IE attribute.  The first cycle of the
++ *	scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY
++ *	is supplied.
+  * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
+  *	scheduled scan is not running. The caller may assume that as soon
+  *	as the call returns, it is safe to start a new scheduled scan again.
+@@ -639,7 +676,18 @@
+  * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels
+  *	independently of the userspace SME, send this event indicating
+  *	%NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the
+- *	attributes determining channel width.
++ *	attributes determining channel width.  This indication may also be
++ *	sent when a remotely-initiated switch (e.g., when a STA receives a CSA
++ *	from the remote AP) is completed;
++ *
++ * @NL80211_CMD_CH_SWITCH_STARTED_NOTIFY: Notify that a channel switch
++ *	has been started on an interface, regardless of the initiator
++ *	(ie. whether it was requested from a remote device or
++ *	initiated on our own).  It indicates that
++ *	%NL80211_ATTR_IFINDEX will be on %NL80211_ATTR_WIPHY_FREQ
++ *	after %NL80211_ATTR_CH_SWITCH_COUNT TBTT's.  The userspace may
++ *	decide to react to this indication by requesting other
++ *	interfaces to change channel as well.
+  *
+  * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by
+  *	its %NL80211_ATTR_WDEV identifier. It must have been created with
+@@ -738,6 +786,31 @@
+  *	before removing a station entry entirely, or before disassociating
+  *	or similar, cleanup will happen in the driver/device in this case.
+  *
++ * @NL80211_CMD_GET_MPP: Get mesh path attributes for mesh proxy path to
++ *	destination %NL80211_ATTR_MAC on the interface identified by
++ *	%NL80211_ATTR_IFINDEX.
++ *
++ * @NL80211_CMD_JOIN_OCB: Join the OCB network. The center frequency and
++ *	bandwidth of a channel must be given.
++ * @NL80211_CMD_LEAVE_OCB: Leave the OCB network -- no special arguments, the
++ *	network is determined by the network interface.
++ *
++ * @NL80211_CMD_TDLS_CHANNEL_SWITCH: Start channel-switching with a TDLS peer,
++ *	identified by the %NL80211_ATTR_MAC parameter. A target channel is
++ *	provided via %NL80211_ATTR_WIPHY_FREQ and other attributes determining
++ *	channel width/type. The target operating class is given via
++ *	%NL80211_ATTR_OPER_CLASS.
++ *	The driver is responsible for continually initiating channel-switching
++ *	operations and returning to the base channel for communication with the
++ *	AP.
++ * @NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH: Stop channel-switching with a TDLS
++ *	peer given by %NL80211_ATTR_MAC. Both peers must be on the base channel
++ *	when this command completes.
++ *
++ * @NL80211_CMD_WIPHY_REG_CHANGE: Similar to %NL80211_CMD_REG_CHANGE, but used
++ *	as an event to indicate changes for devices with wiphy-specific regdom
++ *	management.
 + *
   * @NL80211_CMD_MAX: highest used command number
   * @__NL80211_CMD_AFTER_LAST: internal use
   */
-@@ -890,6 +909,9 @@ enum nl80211_commands {
+@@ -912,6 +985,18 @@ enum nl80211_commands {
+ 	NL80211_CMD_ADD_TX_TS,
+ 	NL80211_CMD_DEL_TX_TS,
  
- 	NL80211_CMD_SET_QOS_MAP,
- 
-+	NL80211_CMD_ADD_TX_TS,
-+	NL80211_CMD_DEL_TX_TS,
++	NL80211_CMD_GET_MPP,
++
++	NL80211_CMD_JOIN_OCB,
++	NL80211_CMD_LEAVE_OCB,
++
++	NL80211_CMD_CH_SWITCH_STARTED_NOTIFY,
++
++	NL80211_CMD_TDLS_CHANNEL_SWITCH,
++	NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH,
++
++	NL80211_CMD_WIPHY_REG_CHANGE,
 +
  	/* add new commands above here */
  
  	/* used to define NL80211_CMD_MAX below */
-@@ -1525,10 +1547,10 @@ enum nl80211_commands {
-  *	operation).
-  * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information
-  *	for the time while performing a channel switch.
-- * @NL80211_ATTR_CSA_C_OFF_BEACON: Offset of the channel switch counter
-- *	field in the beacons tail (%NL80211_ATTR_BEACON_TAIL).
-- * @NL80211_ATTR_CSA_C_OFF_PRESP: Offset of the channel switch counter
-- *	field in the probe response (%NL80211_ATTR_PROBE_RESP).
-+ * @NL80211_ATTR_CSA_C_OFF_BEACON: An array of offsets (u16) to the channel
-+ *	switch counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL).
-+ * @NL80211_ATTR_CSA_C_OFF_PRESP: An array of offsets (u16) to the channel
-+ *	switch counters in the probe response (%NL80211_ATTR_PROBE_RESP).
-  *
-  * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32.
-  *	As specified in the &enum nl80211_rxmgmt_flags.
-@@ -1576,9 +1598,49 @@ enum nl80211_commands {
-  *	advertise values that cannot always be met. In such cases, an attempt
-  *	to add a new station entry with @NL80211_CMD_NEW_STATION may fail.
-  *
-+ * @NL80211_ATTR_CSA_C_OFFSETS_TX: An array of csa counter offsets (u16) which
-+ *	should be updated when the frame is transmitted.
-+ * @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum
-+ *	supported number of csa counters.
-+ *
+@@ -1606,9 +1691,16 @@ enum nl80211_commands {
   * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32.
   *	As specified in the &enum nl80211_tdls_peer_capability.
   *
-+ * @NL80211_ATTR_IFACE_SOCKET_OWNER: flag attribute, if set during interface
-+ *	creation then the new interface will be owned by the netlink socket
-+ *	that created it and will be destroyed when the socket is closed
+- * @NL80211_ATTR_IFACE_SOCKET_OWNER: flag attribute, if set during interface
++ * @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface
+  *	creation then the new interface will be owned by the netlink socket
+- *	that created it and will be destroyed when the socket is closed
++ *	that created it and will be destroyed when the socket is closed.
++ *	If set during scheduled scan start then the new scan req will be
++ *	owned by the netlink socket that created it and the scheduled scan will
++ *	be stopped when the socket is closed.
++ *	If set during configuration of regulatory indoor operation then the
++ *	regulatory indoor configuration would be owned by the netlink socket
++ *	that configured the indoor setting, and the indoor operation would be
++ *	cleared when the socket is closed.
+  *
+  * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
+  *	the TDLS link initiator.
+@@ -1638,6 +1730,40 @@ enum nl80211_commands {
+  * @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see
+  *	&enum nl80211_smps_mode.
+  *
++ * @NL80211_ATTR_OPER_CLASS: operating class
 + *
-+ * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
-+ *	the TDLS link initiator.
++ * @NL80211_ATTR_MAC_MASK: MAC address mask
 + *
-+ * @NL80211_ATTR_USE_RRM: flag for indicating whether the current connection
-+ *	shall support Radio Resource Measurements (11k). This attribute can be
-+ *	used with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests.
-+ *	User space applications are expected to use this flag only if the
-+ *	underlying device supports these minimal RRM features:
-+ *		%NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES,
-+ *		%NL80211_FEATURE_QUIET,
-+ *	If this flag is used, driver must add the Power Capabilities IE to the
-+ *	association request. In addition, it must also set the RRM capability
-+ *	flag in the association request's Capability Info field.
++ * @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device
++ *	is self-managing its regulatory information and any regulatory domain
++ *	obtained from it is coming from the device's wiphy and not the global
++ *	cfg80211 regdomain.
 + *
-+ * @NL80211_ATTR_WIPHY_DYN_ACK: flag attribute used to enable ACK timeout
-+ *	estimation algorithm (dynack). In order to activate dynack
-+ *	%NL80211_FEATURE_ACKTO_ESTIMATION feature flag must be set by lower
-+ *	drivers to indicate dynack capability. Dynack is automatically disabled
-+ *	setting valid value for coverage class.
++ * @NL80211_ATTR_EXT_FEATURES: extended feature flags contained in a byte
++ *	array. The feature flags are identified by their bit index (see &enum
++ *	nl80211_ext_feature_index). The bit index is ordered starting at the
++ *	least-significant bit of the first byte in the array, ie. bit index 0
++ *	is located at bit 0 of byte 0. bit index 25 would be located at bit 1
++ *	of byte 3 (u8 array).
 + *
-+ * @NL80211_ATTR_TSID: a TSID value (u8 attribute)
-+ * @NL80211_ATTR_USER_PRIO: user priority value (u8 attribute)
-+ * @NL80211_ATTR_ADMITTED_TIME: admitted time in units of 32 microseconds
-+ *	(per second) (u16 attribute)
++ * @NL80211_ATTR_SURVEY_RADIO_STATS: Request overall radio statistics to be
++ *	returned along with other survey data. If set, @NL80211_CMD_GET_SURVEY
++ *	may return a survey entry without a channel indicating global radio
++ *	statistics (only some values are valid and make sense.)
++ *	For devices that don't return such an entry even then, the information
++ *	should be contained in the result as the sum of the respective counters
++ *	over all channels.
 + *
-+ * @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see
-+ *	&enum nl80211_smps_mode.
++ * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before a scheduled scan (or a
++ *	WoWLAN net-detect scan) is started, u32 in seconds.
++
++ * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
++ *      is operating in an indoor environment.
 + *
 + * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
 + *	transmit power to stay within regulatory limits. u32, dBi.
 + *
++ * @NUM_NL80211_ATTR: total number of nl80211_attrs available
   * @NL80211_ATTR_MAX: highest attribute number currently defined
   * @__NL80211_ATTR_AFTER_LAST: internal use
   */
-@@ -1914,6 +1976,25 @@ enum nl80211_attrs {
+@@ -1973,7 +2099,7 @@ enum nl80211_attrs {
  
  	NL80211_ATTR_TDLS_PEER_CAPABILITY,
  
-+	NL80211_ATTR_IFACE_SOCKET_OWNER,
+-	NL80211_ATTR_IFACE_SOCKET_OWNER,
++	NL80211_ATTR_SOCKET_OWNER,
+ 
+ 	NL80211_ATTR_CSA_C_OFFSETS_TX,
+ 	NL80211_ATTR_MAX_CSA_COUNTERS,
+@@ -1990,15 +2116,35 @@ enum nl80211_attrs {
+ 
+ 	NL80211_ATTR_SMPS_MODE,
+ 
++	NL80211_ATTR_OPER_CLASS,
++
++	NL80211_ATTR_MAC_MASK,
 +
-+	NL80211_ATTR_CSA_C_OFFSETS_TX,
-+	NL80211_ATTR_MAX_CSA_COUNTERS,
++	NL80211_ATTR_WIPHY_SELF_MANAGED_REG,
 +
-+	NL80211_ATTR_TDLS_INITIATOR,
++	NL80211_ATTR_EXT_FEATURES,
 +
-+	NL80211_ATTR_USE_RRM,
++	NL80211_ATTR_SURVEY_RADIO_STATS,
 +
-+	NL80211_ATTR_WIPHY_DYN_ACK,
++	NL80211_ATTR_NETNS_FD,
 +
-+	NL80211_ATTR_TSID,
-+	NL80211_ATTR_USER_PRIO,
-+	NL80211_ATTR_ADMITTED_TIME,
++	NL80211_ATTR_SCHED_SCAN_DELAY,
 +
-+	NL80211_ATTR_SMPS_MODE,
++	NL80211_ATTR_REG_INDOOR,
 +
 +	NL80211_ATTR_WIPHY_ANTENNA_GAIN,
 +
  	/* add attributes here, update the policy in nl80211.c */
  
  	__NL80211_ATTR_AFTER_LAST,
-@@ -2182,6 +2263,8 @@ enum nl80211_sta_bss_param {
-  *	Contains a nested array of signal strength attributes (u8, dBm)
-  * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average
++	NUM_NL80211_ATTR = __NL80211_ATTR_AFTER_LAST,
+ 	NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
+ };
+ 
+ /* source-level API compatibility */
+ #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
+ #define	NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
++#define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER
+ 
+ /*
+  * Allow user space programs to use #ifdef on new attributes by defining them
+@@ -2028,7 +2174,7 @@ enum nl80211_attrs {
+ 
+ #define NL80211_MAX_SUPP_RATES			32
+ #define NL80211_MAX_SUPP_HT_RATES		77
+-#define NL80211_MAX_SUPP_REG_RULES		32
++#define NL80211_MAX_SUPP_REG_RULES		64
+ #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY	0
+ #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY	16
+ #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY	24
+@@ -2064,6 +2210,8 @@ enum nl80211_attrs {
+  *	and therefore can't be created in the normal ways, use the
+  *	%NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE
+  *	commands to create and destroy one
++ * @NL80211_IF_TYPE_OCB: Outside Context of a BSS
++ *	This mode corresponds to the MIB variable dot11OCBActivated=true
+  * @NL80211_IFTYPE_MAX: highest interface type number currently defined
+  * @NUM_NL80211_IFTYPES: number of defined interface types
+  *
+@@ -2083,6 +2231,7 @@ enum nl80211_iftype {
+ 	NL80211_IFTYPE_P2P_CLIENT,
+ 	NL80211_IFTYPE_P2P_GO,
+ 	NL80211_IFTYPE_P2P_DEVICE,
++	NL80211_IFTYPE_OCB,
+ 
+ 	/* keep last */
+ 	NUM_NL80211_IFTYPES,
+@@ -2165,8 +2314,15 @@ struct nl80211_sta_flag_update {
+  * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8)
+  * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8)
+  * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate
+- * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: 80+80 MHz VHT rate
++ * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: unused - 80+80 is treated the
++ *	same as 160 for purposes of the bitrates
+  * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate
++ * @NL80211_RATE_INFO_10_MHZ_WIDTH: 10 MHz width - note that this is
++ *	a legacy rate and will be reported as the actual bitrate, i.e.
++ *	half the base (20 MHz) rate
++ * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is
++ *	a legacy rate and will be reported as the actual bitrate, i.e.
++ *	a quarter of the base (20 MHz) rate
+  * @__NL80211_RATE_INFO_AFTER_LAST: internal use
+  */
+ enum nl80211_rate_info {
+@@ -2181,6 +2337,8 @@ enum nl80211_rate_info {
+ 	NL80211_RATE_INFO_80_MHZ_WIDTH,
+ 	NL80211_RATE_INFO_80P80_MHZ_WIDTH,
+ 	NL80211_RATE_INFO_160_MHZ_WIDTH,
++	NL80211_RATE_INFO_10_MHZ_WIDTH,
++	NL80211_RATE_INFO_5_MHZ_WIDTH,
+ 
+ 	/* keep last */
+ 	__NL80211_RATE_INFO_AFTER_LAST,
+@@ -2225,18 +2383,24 @@ enum nl80211_sta_bss_param {
+  *
+  * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
+  * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
+- * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
+- * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
+- * @NL80211_STA_INFO_RX_BYTES64: total received bytes (u64, from this station)
+- * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (u64, to this station)
++ * @NL80211_STA_INFO_RX_BYTES: total received bytes (MPDU length)
++ *	(u32, from this station)
++ * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (MPDU length)
++ *	(u32, to this station)
++ * @NL80211_STA_INFO_RX_BYTES64: total received bytes (MPDU length)
++ *	(u64, from this station)
++ * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (MPDU length)
++ *	(u64, to this station)
+  * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
+  * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
+  * 	containing info as possible, see &enum nl80211_rate_info
+- * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
+- * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
+- *	station)
+- * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
+- * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
++ * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs)
++ *	(u32, from this station)
++ * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs)
++ *	(u32, to this station)
++ * @NL80211_STA_INFO_TX_RETRIES: total retries (MPDUs) (u32, to this station)
++ * @NL80211_STA_INFO_TX_FAILED: total failed packets (MPDUs)
++ *	(u32, to this station)
+  * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
+  * @NL80211_STA_INFO_LLID: the station's mesh LLID
+  * @NL80211_STA_INFO_PLID: the station's mesh PLID
+@@ -2260,6 +2424,16 @@ enum nl80211_sta_bss_param {
   *	Same format as NL80211_STA_INFO_CHAIN_SIGNAL.
-+ * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the
-+ *	802.11 header (u32, kbps)
+  * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the
+  *	802.11 header (u32, kbps)
++ * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons
++ *	(u64)
++ * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64)
++ * @NL80211_STA_INFO_BEACON_SIGNAL_AVG: signal strength average
++ *	for beacons only (u8, dBm)
++ * @NL80211_STA_INFO_TID_STATS: per-TID statistics (see &enum nl80211_tid_stats)
++ *	This is a nested attribute where each the inner attribute number is the
++ *	TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames;
++ *	each one of those is again nested with &enum nl80211_tid_stats
++ *	attributes carrying the actual values.
   * @__NL80211_STA_INFO_AFTER_LAST: internal
   * @NL80211_STA_INFO_MAX: highest possible station info attribute
   */
-@@ -2213,6 +2296,7 @@ enum nl80211_sta_info {
- 	NL80211_STA_INFO_TX_BYTES64,
+@@ -2292,6 +2466,10 @@ enum nl80211_sta_info {
  	NL80211_STA_INFO_CHAIN_SIGNAL,
  	NL80211_STA_INFO_CHAIN_SIGNAL_AVG,
-+	NL80211_STA_INFO_EXPECTED_THROUGHPUT,
+ 	NL80211_STA_INFO_EXPECTED_THROUGHPUT,
++	NL80211_STA_INFO_RX_DROP_MISC,
++	NL80211_STA_INFO_BEACON_RX,
++	NL80211_STA_INFO_BEACON_SIGNAL_AVG,
++	NL80211_STA_INFO_TID_STATS,
  
  	/* keep last */
  	__NL80211_STA_INFO_AFTER_LAST,
-@@ -2336,9 +2420,34 @@ enum nl80211_band_attr {
-  *	using this channel as the primary or any of the secondary channels
-  *	isn't possible
-  * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
-+ * @NL80211_FREQUENCY_ATTR_INDOOR_ONLY: Only indoor use is permitted on this
-+ *	channel. A channel that has the INDOOR_ONLY attribute can only be
-+ *	used when there is a clear assessment that the device is operating in
-+ *	an indoor surroundings, i.e., it is connected to AC power (and not
-+ *	through portable DC inverters) or is under the control of a master
-+ *	that is acting as an AP and is connected to AC power.
-+ * @NL80211_FREQUENCY_ATTR_GO_CONCURRENT: GO operation is allowed on this
-+ *	channel if it's connected concurrently to a BSS on the same channel on
-+ *	the 2 GHz band or to a channel in the same UNII band (on the 5 GHz
-+ *	band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO on a
-+ *	channel that has the GO_CONCURRENT attribute set can be done when there
-+ *	is a clear assessment that the device is operating under the guidance of
-+ *	an authorized master, i.e., setting up a GO while the device is also
-+ *	connected to an AP with DFS and radar detection on the UNII band (it is
-+ *	up to user-space, i.e., wpa_supplicant to perform the required
-+ *	verifications)
-+ * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed
-+ *	on this channel in current regulatory domain.
-+ * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed
-+ *	on this channel in current regulatory domain.
-  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
-  *	currently defined
-  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
-+ *
-+ * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122
-+ * for more information on the FCC description of the relaxations allowed
-+ * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and
-+ * NL80211_FREQUENCY_ATTR_GO_CONCURRENT.
+@@ -2299,6 +2477,31 @@ enum nl80211_sta_info {
+ };
+ 
+ /**
++ * enum nl80211_tid_stats - per TID statistics attributes
++ * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved
++ * @NL80211_TID_STATS_RX_MSDU: number of MSDUs received (u64)
++ * @NL80211_TID_STATS_TX_MSDU: number of MSDUs transmitted (or
++ *	attempted to transmit; u64)
++ * @NL80211_TID_STATS_TX_MSDU_RETRIES: number of retries for
++ *	transmitted MSDUs (not counting the first attempt; u64)
++ * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted
++ *	MSDUs (u64)
++ * @NUM_NL80211_TID_STATS: number of attributes here
++ * @NL80211_TID_STATS_MAX: highest numbered attribute here
++ */
++enum nl80211_tid_stats {
++	__NL80211_TID_STATS_INVALID,
++	NL80211_TID_STATS_RX_MSDU,
++	NL80211_TID_STATS_TX_MSDU,
++	NL80211_TID_STATS_TX_MSDU_RETRIES,
++	NL80211_TID_STATS_TX_MSDU_FAILED,
++
++	/* keep last */
++	NUM_NL80211_TID_STATS,
++	NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1
++};
++
++/**
+  * enum nl80211_mpath_flags - nl80211 mesh path flags
+  *
+  * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
+@@ -2631,6 +2834,11 @@ enum nl80211_sched_scan_match_attr {
+  * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
+  *	base on contiguous rules and wider channels will be allowed to cross
+  *	multiple contiguous/overlapping frequency ranges.
++ * @NL80211_RRF_GO_CONCURRENT: See &NL80211_FREQUENCY_ATTR_GO_CONCURRENT
++ * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation
++ * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation
++ * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
++ * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed
   */
- enum nl80211_frequency_attr {
- 	__NL80211_FREQUENCY_ATTR_INVALID,
-@@ -2355,6 +2464,10 @@ enum nl80211_frequency_attr {
- 	NL80211_FREQUENCY_ATTR_NO_80MHZ,
- 	NL80211_FREQUENCY_ATTR_NO_160MHZ,
- 	NL80211_FREQUENCY_ATTR_DFS_CAC_TIME,
-+	NL80211_FREQUENCY_ATTR_INDOOR_ONLY,
-+	NL80211_FREQUENCY_ATTR_GO_CONCURRENT,
-+	NL80211_FREQUENCY_ATTR_NO_20MHZ,
-+	NL80211_FREQUENCY_ATTR_NO_10MHZ,
+ enum nl80211_reg_rule_flags {
+ 	NL80211_RRF_NO_OFDM		= 1<<0,
+@@ -2643,11 +2851,18 @@ enum nl80211_reg_rule_flags {
+ 	NL80211_RRF_NO_IR		= 1<<7,
+ 	__NL80211_RRF_NO_IBSS		= 1<<8,
+ 	NL80211_RRF_AUTO_BW		= 1<<11,
++	NL80211_RRF_GO_CONCURRENT	= 1<<12,
++	NL80211_RRF_NO_HT40MINUS	= 1<<13,
++	NL80211_RRF_NO_HT40PLUS		= 1<<14,
++	NL80211_RRF_NO_80MHZ		= 1<<15,
++	NL80211_RRF_NO_160MHZ		= 1<<16,
+ };
+ 
+ #define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR
+ #define NL80211_RRF_NO_IBSS		NL80211_RRF_NO_IR
+ #define NL80211_RRF_NO_IR		NL80211_RRF_NO_IR
++#define NL80211_RRF_NO_HT40		(NL80211_RRF_NO_HT40MINUS |\
++					 NL80211_RRF_NO_HT40PLUS)
+ 
+ /* For backport compatibility with older userspace */
+ #define NL80211_RRF_NO_IR_ALL		(NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS)
+@@ -2700,16 +2915,18 @@ enum nl80211_user_reg_hint_type {
+  * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
+  * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
+  * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
+- * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio
+- *	spent on this channel
+- * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary
++ * @NL80211_SURVEY_INFO_TIME: amount of time (in ms) that the radio
++ *	was turned on (on channel or globally)
++ * @NL80211_SURVEY_INFO_TIME_BUSY: amount of the time the primary
+  *	channel was sensed busy (either due to activity or energy detect)
+- * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension
++ * @NL80211_SURVEY_INFO_TIME_EXT_BUSY: amount of time the extension
+  *	channel was sensed busy
+- * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent
+- *	receiving data
+- * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent
+- *	transmitting data
++ * @NL80211_SURVEY_INFO_TIME_RX: amount of time the radio spent
++ *	receiving data (on channel or globally)
++ * @NL80211_SURVEY_INFO_TIME_TX: amount of time the radio spent
++ *	transmitting data (on channel or globally)
++ * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan
++ *	(on this channel or globally)
+  * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
+  *	currently defined
+  * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
+@@ -2719,17 +2936,25 @@ enum nl80211_survey_info {
+ 	NL80211_SURVEY_INFO_FREQUENCY,
+ 	NL80211_SURVEY_INFO_NOISE,
+ 	NL80211_SURVEY_INFO_IN_USE,
+-	NL80211_SURVEY_INFO_CHANNEL_TIME,
+-	NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY,
+-	NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY,
+-	NL80211_SURVEY_INFO_CHANNEL_TIME_RX,
+-	NL80211_SURVEY_INFO_CHANNEL_TIME_TX,
++	NL80211_SURVEY_INFO_TIME,
++	NL80211_SURVEY_INFO_TIME_BUSY,
++	NL80211_SURVEY_INFO_TIME_EXT_BUSY,
++	NL80211_SURVEY_INFO_TIME_RX,
++	NL80211_SURVEY_INFO_TIME_TX,
++	NL80211_SURVEY_INFO_TIME_SCAN,
  
  	/* keep last */
- 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
-@@ -2573,10 +2686,13 @@ enum nl80211_dfs_regions {
-  *	present has been registered with the wireless core that
-  *	has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a
-  *	supported feature.
-+ * @NL80211_USER_REG_HINT_INDOOR: a user sent an hint indicating that the
-+ *	platform is operating in an indoor environment.
-  */
- enum nl80211_user_reg_hint_type {
- 	NL80211_USER_REG_HINT_USER	= 0,
- 	NL80211_USER_REG_HINT_CELL_BASE = 1,
-+	NL80211_USER_REG_HINT_INDOOR    = 2,
+ 	__NL80211_SURVEY_INFO_AFTER_LAST,
+ 	NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1
  };
  
++/* keep old names for compatibility */
++#define NL80211_SURVEY_INFO_CHANNEL_TIME		NL80211_SURVEY_INFO_TIME
++#define NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY		NL80211_SURVEY_INFO_TIME_BUSY
++#define NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY	NL80211_SURVEY_INFO_TIME_EXT_BUSY
++#define NL80211_SURVEY_INFO_CHANNEL_TIME_RX		NL80211_SURVEY_INFO_TIME_RX
++#define NL80211_SURVEY_INFO_CHANNEL_TIME_TX		NL80211_SURVEY_INFO_TIME_TX
++
+ /**
+  * enum nl80211_mntr_flags - monitor configuration flags
+  *
+@@ -2894,7 +3119,8 @@ enum nl80211_mesh_power_mode {
+  *
+  * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've
+  *	established peering with for longer than this time (in seconds), then
+- *	remove it from the STA's list of peers.  Default is 30 minutes.
++ *	remove it from the STA's list of peers. You may set this to 0 to disable
++ *	the removal of the STA. Default is 30 minutes.
+  *
+  * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
+  */
+@@ -3166,6 +3392,9 @@ enum nl80211_bss {
  /**
-@@ -2998,14 +3114,20 @@ enum nl80211_bss_scan_width {
-  * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets)
-  * @NL80211_BSS_FREQUENCY: frequency in MHz (u32)
-  * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64)
-+ *	(if @NL80211_BSS_PRESP_DATA is present then this is known to be
-+ *	from a probe response, otherwise it may be from the same beacon
-+ *	that the NL80211_BSS_BEACON_TSF will be from)
-  * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)
-  * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16)
-  * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
-  *	raw information elements from the probe response/beacon (bin);
-- *	if the %NL80211_BSS_BEACON_IES attribute is present, the IEs here are
-- *	from a Probe Response frame; otherwise they are from a Beacon frame.
-+ *	if the %NL80211_BSS_BEACON_IES attribute is present and the data is
-+ *	different then the IEs here are from a Probe Response frame; otherwise
-+ *	they are from a Beacon frame.
-  *	However, if the driver does not indicate the source of the IEs, these
-  *	IEs may be from either frame subtype.
-+ *	If present, the @NL80211_BSS_PRESP_DATA attribute indicates that the
-+ *	data here is known to be from a probe response, without any heuristics.
-  * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon
-  *	in mBm (100 * dBm) (s32)
-  * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
-@@ -3017,6 +3139,10 @@ enum nl80211_bss_scan_width {
-  *	yet been received
-  * @NL80211_BSS_CHAN_WIDTH: channel width of the control channel
-  *	(u32, enum nl80211_bss_scan_width)
-+ * @NL80211_BSS_BEACON_TSF: TSF of the last received beacon (u64)
-+ *	(not present if no beacon frame has been received yet)
-+ * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and
-+ *	@NL80211_BSS_TSF is known to be from a probe response (flag attribute)
-  * @__NL80211_BSS_AFTER_LAST: internal
-  * @NL80211_BSS_MAX: highest BSS attribute
+  * enum nl80211_bss_status - BSS "status"
+  * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS.
++ *	Note that this is no longer used since cfg80211 no longer
++ *	keeps track of whether or not authentication was done with
++ *	a given BSS.
+  * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS.
+  * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS.
+  *
+@@ -3379,6 +3608,8 @@ enum nl80211_ps_state {
+  *	interval in which %NL80211_ATTR_CQM_TXE_PKTS and
+  *	%NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an
+  *	%NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting.
++ * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon
++ *	loss event
+  * @__NL80211_ATTR_CQM_AFTER_LAST: internal
+  * @NL80211_ATTR_CQM_MAX: highest key attribute
   */
-@@ -3034,6 +3160,8 @@ enum nl80211_bss {
- 	NL80211_BSS_SEEN_MS_AGO,
- 	NL80211_BSS_BEACON_IES,
- 	NL80211_BSS_CHAN_WIDTH,
-+	NL80211_BSS_BEACON_TSF,
-+	NL80211_BSS_PRESP_DATA,
+@@ -3391,6 +3622,7 @@ enum nl80211_attr_cqm {
+ 	NL80211_ATTR_CQM_TXE_RATE,
+ 	NL80211_ATTR_CQM_TXE_PKTS,
+ 	NL80211_ATTR_CQM_TXE_INTVL,
++	NL80211_ATTR_CQM_BEACON_LOSS_EVENT,
  
  	/* keep last */
- 	__NL80211_BSS_AFTER_LAST,
-@@ -3650,6 +3778,8 @@ enum nl80211_iface_limit_attrs {
-  *	different channels may be used within this group.
-  * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap
-  *	of supported channel widths for radar detection.
-+ * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap
-+ *	of supported regulatory regions for radar detection.
-  * @NUM_NL80211_IFACE_COMB: number of attributes
-  * @MAX_NL80211_IFACE_COMB: highest attribute number
+ 	__NL80211_ATTR_CQM_AFTER_LAST,
+@@ -3403,9 +3635,7 @@ enum nl80211_attr_cqm {
+  *      configured threshold
+  * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the
+  *      configured threshold
+- * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: The device experienced beacon loss.
+- *	(Note that deauth/disassoc will still follow if the AP is not
+- *	available. This event might get used as roaming event, etc.)
++ * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: (reserved, never sent)
+  */
+ enum nl80211_cqm_rssi_threshold_event {
+ 	NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
+@@ -3492,6 +3722,8 @@ struct nl80211_pattern_support {
+  * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
+  *	the chip into a special state -- works best with chips that have
+  *	support for low-power operation already (flag)
++ *	Note that this mode is incompatible with all of the others, if
++ *	any others are even supported by the device.
+  * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
+  *	is detected is implementation-specific (flag)
+  * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
+@@ -3545,6 +3777,28 @@ struct nl80211_pattern_support {
+  * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only,
+  *	the TCP connection ran out of tokens to use for data to send to the
+  *	service
++ * @NL80211_WOWLAN_TRIG_NET_DETECT: wake up when a configured network
++ *	is detected.  This is a nested attribute that contains the
++ *	same attributes used with @NL80211_CMD_START_SCHED_SCAN.  It
++ *	specifies how the scan is performed (e.g. the interval, the
++ *	channels to scan and the initial delay) as well as the scan
++ *	results that will trigger a wake (i.e. the matchsets).  This
++ *	attribute is also sent in a response to
++ *	@NL80211_CMD_GET_WIPHY, indicating the number of match sets
++ *	supported by the driver (u32).
++ * @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute
++ *	containing an array with information about what triggered the
++ *	wake up.  If no elements are present in the array, it means
++ *	that the information is not available.  If more than one
++ *	element is present, it means that more than one match
++ *	occurred.
++ *	Each element in the array is a nested attribute that contains
++ *	one optional %NL80211_ATTR_SSID attribute and one optional
++ *	%NL80211_ATTR_SCAN_FREQUENCIES attribute.  At least one of
++ *	these attributes must be present.  If
++ *	%NL80211_ATTR_SCAN_FREQUENCIES contains more than one
++ *	frequency, it means that the match occurred in more than one
++ *	channel.
+  * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
+  * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
   *
-@@ -3683,6 +3813,7 @@ enum nl80211_if_combination_attrs {
- 	NL80211_IFACE_COMB_STA_AP_BI_MATCH,
- 	NL80211_IFACE_COMB_NUM_CHANNELS,
- 	NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,
-+	NL80211_IFACE_COMB_RADAR_DETECT_REGIONS,
+@@ -3570,6 +3824,8 @@ enum nl80211_wowlan_triggers {
+ 	NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH,
+ 	NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST,
+ 	NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS,
++	NL80211_WOWLAN_TRIG_NET_DETECT,
++	NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS,
  
  	/* keep last */
- 	NUM_NL80211_IFACE_COMB,
-@@ -3893,6 +4024,29 @@ enum nl80211_ap_sme_features {
-  *	interface. An active monitor interface behaves like a normal monitor
-  *	interface, but gets added to the driver. It ensures that incoming
-  *	unicast packets directed at the configured interface address get ACKed.
-+ * @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic
-+ *	channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the
-+ *	lifetime of a BSS.
-+ * @NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES: This device adds a DS Parameter
-+ *	Set IE to probe requests.
-+ * @NL80211_FEATURE_WFA_TPC_IE_IN_PROBES: This device adds a WFA TPC Report IE
-+ *	to probe requests.
-+ * @NL80211_FEATURE_QUIET: This device, in client mode, supports Quiet Period
-+ *	requests sent to it by an AP.
-+ * @NL80211_FEATURE_TX_POWER_INSERTION: This device is capable of inserting the
-+ *	current tx power value into the TPC Report IE in the spectrum
-+ *	management TPC Report action frame, and in the Radio Measurement Link
-+ *	Measurement Report action frame.
-+ * @NL80211_FEATURE_ACKTO_ESTIMATION: This driver supports dynamic ACK timeout
-+ *	estimation (dynack). %NL80211_ATTR_WIPHY_DYN_ACK flag attribute is used
-+ *	to enable dynack.
-+ * @NL80211_FEATURE_STATIC_SMPS: Device supports static spatial
-+ *	multiplexing powersave, ie. can turn off all but one chain
-+ *	even on HT connections that should be using more chains.
-+ * @NL80211_FEATURE_DYNAMIC_SMPS: Device supports dynamic spatial
-+ *	multiplexing powersave, ie. can turn off all but one chain
-+ *	and then wake the rest up as required after, for example,
-+ *	rts/cts handshake.
+ 	NUM_NL80211_WOWLAN_TRIG,
+@@ -4042,6 +4298,27 @@ enum nl80211_ap_sme_features {
+  *	multiplexing powersave, ie. can turn off all but one chain
+  *	and then wake the rest up as required after, for example,
+  *	rts/cts handshake.
++ * @NL80211_FEATURE_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM
++ *	TSPEC sessions (TID aka TSID 0-7) with the %NL80211_CMD_ADD_TX_TS
++ *	command. Standard IEEE 802.11 TSPEC setup is not yet supported, it
++ *	needs to be able to handle Block-Ack agreements and other things.
++ * @NL80211_FEATURE_MAC_ON_CREATE: Device supports configuring
++ *	the vif's MAC address upon creation.
++ *	See 'macaddr' field in the vif_params (cfg80211.h).
++ * @NL80211_FEATURE_TDLS_CHANNEL_SWITCH: Driver supports channel switching when
++ *	operating as a TDLS peer.
++ * @NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR: This device/driver supports using a
++ *	random MAC address during scan (if the device is unassociated); the
++ *	%NL80211_SCAN_FLAG_RANDOM_ADDR flag may be set for scans and the MAC
++ *	address mask/value will be used.
++ * @NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR: This device/driver supports
++ *	using a random MAC address for every scan iteration during scheduled
++ *	scan (while not associated), the %NL80211_SCAN_FLAG_RANDOM_ADDR may
++ *	be set for scheduled scan and the MAC address mask/value will be used.
++ * @NL80211_FEATURE_ND_RANDOM_MAC_ADDR: This device/driver supports using a
++ *	random MAC address for every scan iteration during "net detect", i.e.
++ *	scan in unassociated WoWLAN, the %NL80211_SCAN_FLAG_RANDOM_ADDR may
++ *	be set for scheduled scan and the MAC address mask/value will be used.
   */
  enum nl80211_feature_flags {
  	NL80211_FEATURE_SK_TX_STATUS			= 1 << 0,
-@@ -3913,6 +4067,14 @@ enum nl80211_feature_flags {
- 	NL80211_FEATURE_FULL_AP_CLIENT_STATE		= 1 << 15,
- 	NL80211_FEATURE_USERSPACE_MPM			= 1 << 16,
- 	NL80211_FEATURE_ACTIVE_MONITOR			= 1 << 17,
-+	NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE	= 1 << 18,
-+	NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES	= 1 << 19,
-+	NL80211_FEATURE_WFA_TPC_IE_IN_PROBES		= 1 << 20,
-+	NL80211_FEATURE_QUIET				= 1 << 21,
-+	NL80211_FEATURE_TX_POWER_INSERTION		= 1 << 22,
-+	NL80211_FEATURE_ACKTO_ESTIMATION		= 1 << 23,
-+	NL80211_FEATURE_STATIC_SMPS			= 1 << 24,
-+	NL80211_FEATURE_DYNAMIC_SMPS			= 1 << 25,
+@@ -4070,6 +4347,27 @@ enum nl80211_feature_flags {
+ 	NL80211_FEATURE_ACKTO_ESTIMATION		= 1 << 23,
+ 	NL80211_FEATURE_STATIC_SMPS			= 1 << 24,
+ 	NL80211_FEATURE_DYNAMIC_SMPS			= 1 << 25,
++	NL80211_FEATURE_SUPPORTS_WMM_ADMISSION		= 1 << 26,
++	NL80211_FEATURE_MAC_ON_CREATE			= 1 << 27,
++	NL80211_FEATURE_TDLS_CHANNEL_SWITCH		= 1 << 28,
++	NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR		= 1 << 29,
++	NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR	= 1 << 30,
++	NL80211_FEATURE_ND_RANDOM_MAC_ADDR		= 1 << 31,
++};
++
++/**
++ * enum nl80211_ext_feature_index - bit index of extended features.
++ * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates.
++ *
++ * @NUM_NL80211_EXT_FEATURES: number of extended features.
++ * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
++ */
++enum nl80211_ext_feature_index {
++	NL80211_EXT_FEATURE_VHT_IBSS,
++
++	/* add new features before the definition below */
++	NUM_NL80211_EXT_FEATURES,
++	MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 1
  };
  
  /**
-@@ -3987,6 +4149,25 @@ enum nl80211_acl_policy {
+@@ -4118,11 +4416,21 @@ enum nl80211_connect_failed_reason {
+  *	dangerous because will destroy stations performance as a lot of frames
+  *	will be lost while scanning off-channel, therefore it must be used only
+  *	when really needed
++ * @NL80211_SCAN_FLAG_RANDOM_ADDR: use a random MAC address for this scan (or
++ *	for scheduled scan: a different one for every scan iteration). When the
++ *	flag is set, depending on device capabilities the @NL80211_ATTR_MAC and
++ *	@NL80211_ATTR_MAC_MASK attributes may also be given in which case only
++ *	the masked bits will be preserved from the MAC address and the remainder
++ *	randomised. If the attributes are not given full randomisation (46 bits,
++ *	locally administered 1, multicast 0) is assumed.
++ *	This flag must not be requested when the feature isn't supported, check
++ *	the nl80211 feature flags for the device.
+  */
+ enum nl80211_scan_flags {
+ 	NL80211_SCAN_FLAG_LOW_PRIORITY			= 1<<0,
+ 	NL80211_SCAN_FLAG_FLUSH				= 1<<1,
+ 	NL80211_SCAN_FLAG_AP				= 1<<2,
++	NL80211_SCAN_FLAG_RANDOM_ADDR			= 1<<3,
  };
  
  /**
-+ * enum nl80211_smps_mode - SMPS mode
-+ *
-+ * Requested SMPS mode (for AP mode)
-+ *
-+ * @NL80211_SMPS_OFF: SMPS off (use all antennas).
-+ * @NL80211_SMPS_STATIC: static SMPS (use a single antenna)
-+ * @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and
-+ *	turn on other antennas after CTS/RTS).
-+ */
-+enum nl80211_smps_mode {
-+	NL80211_SMPS_OFF,
-+	NL80211_SMPS_STATIC,
-+	NL80211_SMPS_DYNAMIC,
-+
-+	__NL80211_SMPS_AFTER_LAST,
-+	NL80211_SMPS_MAX = __NL80211_SMPS_AFTER_LAST - 1
-+};
-+
-+/**
-  * enum nl80211_radar_event - type of radar event for DFS operation
-  *
-  * Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace
diff --git a/package/network/utils/iw/patches/010-dynack.patch b/package/network/utils/iw/patches/010-dynack.patch
deleted file mode 100644
index 00e4bf2467..0000000000
--- a/package/network/utils/iw/patches/010-dynack.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-
-
-Add auto parameter to set distance command in order to enable ACK timeout
-estimation algorithm (dynack). Dynack is automatically disabled setting valid
-value for coverage class. Currently dynack is supported just by ath9k
-
-This patch is based on "configure dynack through mac80211/cfg80211 stack"
-patchset sent on linux-wireless
-
-Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
----
- info.c    |  2 ++
- nl80211.h | 12 ++++++++++++
- phy.c     | 43 +++++++++++++++++++++++++------------------
- 3 files changed, 39 insertions(+), 18 deletions(-)
-
---- a/info.c
-+++ b/info.c
-@@ -551,6 +551,8 @@ broken_combination:
- 			printf("\tDevice supports scan flush.\n");
- 		if (features & NL80211_FEATURE_AP_SCAN)
- 			printf("\tDevice supports AP scan.\n");
-+		if (features & NL80211_FEATURE_ACKTO_ESTIMATION)
-+			printf("\tDevice supports ACK timeout estimation.\n");
- 	}
- 
- 	if (tb_msg[NL80211_ATTR_TDLS_SUPPORT])
---- a/phy.c
-+++ b/phy.c
-@@ -362,39 +362,46 @@ static int handle_distance(struct nl8021
- 			int argc, char **argv,
- 			enum id_input id)
- {
--	char *end;
--	unsigned int distance, coverage;
--
- 	if (argc != 1)
- 		return 1;
- 
- 	if (!*argv[0])
- 		return 1;
- 
--	distance = strtoul(argv[0], &end, 10);
-+	if (strcmp("auto", argv[0]) == 0) {
-+		NLA_PUT_FLAG(msg, NL80211_ATTR_WIPHY_DYN_ACK);
-+	} else {
-+		char *end;
-+		unsigned int distance, coverage;
- 
--	if (*end)
--		return 1;
-+		distance = strtoul(argv[0], &end, 10);
- 
--	/*
--	 * Divide double the distance by the speed of light in m/usec (300) to
--	 * get round-trip time in microseconds and then divide the result by
--	 * three to get coverage class as specified in IEEE 802.11-2007 table
--	 * 7-27. Values are rounded upwards.
--	 */
--	coverage = (distance + 449) / 450;
--	if (coverage > 255)
--		return 1;
-+		if (*end)
-+			return 1;
-+
-+		/*
-+		 * Divide double the distance by the speed of light
-+		 * in m/usec (300) to get round-trip time in microseconds
-+		 * and then divide the result by three to get coverage class
-+		 * as specified in IEEE 802.11-2007 table 7-27.
-+		 * Values are rounded upwards.
-+		 */
-+		coverage = (distance + 449) / 450;
-+		if (coverage > 255)
-+			return 1;
- 
--	NLA_PUT_U8(msg, NL80211_ATTR_WIPHY_COVERAGE_CLASS, coverage);
-+		NLA_PUT_U8(msg, NL80211_ATTR_WIPHY_COVERAGE_CLASS, coverage);
-+	}
- 
- 	return 0;
-  nla_put_failure:
- 	return -ENOBUFS;
- }
--COMMAND(set, distance, "<distance>",
-+COMMAND(set, distance, "<auto|distance>",
- 	NL80211_CMD_SET_WIPHY, 0, CIB_PHY, handle_distance,
--	"Set appropriate coverage class for given link distance in meters.\n"
-+	"Enable ACK timeout estimation algorithm (dynack) or set appropriate\n"
-+	"coverage class for given link distance in meters.\n"
-+	"To disable dynack set valid value for coverage class.\n"
- 	"Valid values: 0 - 114750");
- 
- static int handle_txpower(struct nl80211_state *state,
diff --git a/package/network/utils/iw/patches/200-reduce_size.patch b/package/network/utils/iw/patches/200-reduce_size.patch
index a6499b3017..882cf89f8d 100644
--- a/package/network/utils/iw/patches/200-reduce_size.patch
+++ b/package/network/utils/iw/patches/200-reduce_size.patch
@@ -83,15 +83,15 @@
  	if (tb_msg[NL80211_ATTR_FEATURE_FLAGS]) {
  		unsigned int features = nla_get_u32(tb_msg[NL80211_ATTR_FEATURE_FLAGS]);
  
-@@ -554,6 +563,7 @@ broken_combination:
- 		if (features & NL80211_FEATURE_ACKTO_ESTIMATION)
- 			printf("\tDevice supports ACK timeout estimation.\n");
+@@ -584,6 +593,7 @@ broken_combination:
+ 		if (features & NL80211_FEATURE_DYNAMIC_SMPS)
+ 			printf("\tDevice supports dynamic SMPS\n");
  	}
 +#endif
  
  	if (tb_msg[NL80211_ATTR_TDLS_SUPPORT])
  		printf("\tDevice supports T-DLS.\n");
-@@ -603,6 +613,7 @@ TOPLEVEL(list, NULL, NL80211_CMD_GET_WIP
+@@ -633,6 +643,7 @@ TOPLEVEL(list, NULL, NL80211_CMD_GET_WIP
  	 "List all wireless devices and their capabilities.");
  TOPLEVEL(phy, NULL, NL80211_CMD_GET_WIPHY, NLM_F_DUMP, CIB_NONE, handle_info, NULL);
  
@@ -99,7 +99,7 @@
  static int handle_commands(struct nl80211_state *state,
  			   struct nl_cb *cb, struct nl_msg *msg,
  			   int argc, char **argv, enum id_input id)
-@@ -615,6 +626,7 @@ static int handle_commands(struct nl8021
+@@ -645,6 +656,7 @@ static int handle_commands(struct nl8021
  }
  TOPLEVEL(commands, NULL, NL80211_CMD_GET_WIPHY, 0, CIB_NONE, handle_commands,
  	 "list all known commands and their decimal & hex value");