iw: sync nl80211.h (fixes settting antenna_gain)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40503

1 files changed, 186 insertions, 3 deletions

diff --git a/package/network/utils/iw/patches/001-nl80211_h_sync.patch b/package/network/utils/iw/patches/001-nl80211_h_sync.patch
index 215c740dd7..cbae38abcb 100644
--- a/package/network/utils/iw/patches/001-nl80211_h_sync.patch
+++ b/package/network/utils/iw/patches/001-nl80211_h_sync.patch
@@ -1,25 +1,119 @@
 --- a/nl80211.h
 +++ b/nl80211.h
-@@ -1555,6 +1555,9 @@ enum nl80211_commands {
+@@ -303,8 +303,9 @@
+  *	passed, all channels allowed for the current regulatory domain
+  *	are used.  Extra IEs can also be passed from the userspace by
+  *	using the %NL80211_ATTR_IE attribute.
+- * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan.  Returns -ENOENT
+- *	if scheduled scan is not running.
++ * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
++ *	scheduled scan is not running. The caller may assume that as soon
++ *	as the call returns, it is safe to start a new scheduled scan again.
+  * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
+  *	results available.
+  * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
+@@ -418,8 +419,18 @@
+  *	%NL80211_ATTR_SSID attribute, and can optionally specify the association
+  *	IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP,
+  *	%NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
+- *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
+- *	%NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
++ *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
++ *	%NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, %NL80211_ATTR_MAC_HINT, and
++ *	%NL80211_ATTR_WIPHY_FREQ_HINT.
++ *	If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are
++ *	restrictions on BSS selection, i.e., they effectively prevent roaming
++ *	within the ESS. %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT
++ *	can be included to provide a recommendation of the initial BSS while
++ *	allowing the driver to roam to other BSSes within the ESS and also to
++ *	ignore this recommendation if the indicated BSS is not ideal. Only one
++ *	set of BSSID,frequency parameters is used (i.e., either the enforcing
++ *	%NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict
++ *	%NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT).
+  *	Background scan period can optionally be
+  *	specified in %NL80211_ATTR_BG_SCAN_PERIOD,
+  *	if not specified default background scan configuration
+@@ -1555,6 +1566,22 @@ enum nl80211_commands {
   *	data is in the format defined for the payload of the QoS Map Set element
   *	in IEEE Std 802.11-2012, 8.4.2.97.
   *
++ * @NL80211_ATTR_MAC_HINT: MAC address recommendation as initial BSS
++ * @NL80211_ATTR_WIPHY_FREQ_HINT: frequency of the recommended initial BSS
++ *
++ * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many
++ *	associated stations are supported in AP mode (including P2P GO); u32.
++ *	Since drivers may not have a fixed limit on the maximum number (e.g.,
++ *	other concurrent operations may affect this), drivers are allowed to
++ *	advertise values that cannot always be met. In such cases, an attempt
++ *	to add a new station entry with @NL80211_CMD_NEW_STATION may fail.
++ *
++ * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32.
++ *	As specified in the &enum nl80211_tdls_peer_capability.
++ *
 + * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
 + *	transmit power to stay within regulatory limits. u32, dBi.
 + *
   * @NL80211_ATTR_MAX: highest attribute number currently defined
   * @__NL80211_ATTR_AFTER_LAST: internal use
   */
-@@ -1883,6 +1886,8 @@ enum nl80211_attrs {
+@@ -1883,6 +1910,15 @@ enum nl80211_attrs {
  
  	NL80211_ATTR_QOS_MAP,
  
++	NL80211_ATTR_MAC_HINT,
++	NL80211_ATTR_WIPHY_FREQ_HINT,
++
++	NL80211_ATTR_MAX_AP_ASSOC_STA,
++
++	NL80211_ATTR_TDLS_PEER_CAPABILITY,
++
 +	NL80211_ATTR_WIPHY_ANTENNA_GAIN,
 +
  	/* add attributes here, update the policy in nl80211.c */
  
  	__NL80211_ATTR_AFTER_LAST,
-@@ -2442,9 +2447,15 @@ enum nl80211_reg_rule_attr {
+@@ -2304,6 +2340,7 @@ enum nl80211_band_attr {
+  * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel
+  *	using this channel as the primary or any of the secondary channels
+  *	isn't possible
++ * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
+  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
+  *	currently defined
+  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
+@@ -2322,6 +2359,7 @@ enum nl80211_frequency_attr {
+ 	NL80211_FREQUENCY_ATTR_NO_HT40_PLUS,
+ 	NL80211_FREQUENCY_ATTR_NO_80MHZ,
+ 	NL80211_FREQUENCY_ATTR_NO_160MHZ,
++	NL80211_FREQUENCY_ATTR_DFS_CAC_TIME,
+ 
+ 	/* keep last */
+ 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
+@@ -2412,12 +2450,14 @@ enum nl80211_reg_type {
+  * 	in KHz. This is not a center a frequency but an actual regulatory
+  * 	band edge.
+  * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
+- * 	frequency range, in KHz.
++ *	frequency range, in KHz.
+  * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
+  * 	for a given frequency range. The value is in mBi (100 * dBi).
+  * 	If you don't have one then don't send this.
+  * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
+  * 	a given frequency range. The value is in mBm (100 * dBm).
++ * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
++ *	If not present or 0 default CAC time will be used.
+  * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
+  *	currently defined
+  * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
+@@ -2433,6 +2473,8 @@ enum nl80211_reg_rule_attr {
+ 	NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
+ 	NL80211_ATTR_POWER_RULE_MAX_EIRP,
+ 
++	NL80211_ATTR_DFS_CAC_TIME,
++
+ 	/* keep last */
+ 	__NL80211_REG_RULE_ATTR_AFTER_LAST,
+ 	NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
+@@ -2442,9 +2484,15 @@ enum nl80211_reg_rule_attr {
   * enum nl80211_sched_scan_match_attr - scheduled scan match attributes
   * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
   * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
@@ -37,3 +131,92 @@
   * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
   *	attribute number currently defined
   * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
+@@ -2477,6 +2525,9 @@ enum nl80211_sched_scan_match_attr {
+  * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,
+  * 	this includes probe requests or modes of operation that require
+  * 	beaconing.
++ * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
++ *	base on contiguous rules and wider channels will be allowed to cross
++ *	multiple contiguous/overlapping frequency ranges.
+  */
+ enum nl80211_reg_rule_flags {
+ 	NL80211_RRF_NO_OFDM		= 1<<0,
+@@ -2488,6 +2539,7 @@ enum nl80211_reg_rule_flags {
+ 	NL80211_RRF_PTMP_ONLY		= 1<<6,
+ 	NL80211_RRF_NO_IR		= 1<<7,
+ 	__NL80211_RRF_NO_IBSS		= 1<<8,
++	NL80211_RRF_AUTO_BW		= 1<<11,
+ };
+ 
+ #define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR
+@@ -3131,6 +3183,7 @@ enum nl80211_key_attributes {
+  *	in an array of MCS numbers.
+  * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection,
+  *	see &struct nl80211_txrate_vht
++ * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi
+  * @__NL80211_TXRATE_AFTER_LAST: internal
+  * @NL80211_TXRATE_MAX: highest TX rate attribute
+  */
+@@ -3139,6 +3192,7 @@ enum nl80211_tx_rate_attributes {
+ 	NL80211_TXRATE_LEGACY,
+ 	NL80211_TXRATE_HT,
+ 	NL80211_TXRATE_VHT,
++	NL80211_TXRATE_GI,
+ 
+ 	/* keep last */
+ 	__NL80211_TXRATE_AFTER_LAST,
+@@ -3156,6 +3210,12 @@ struct nl80211_txrate_vht {
+ 	__u16 mcs[NL80211_VHT_NSS_MAX];
+ };
+ 
++enum nl80211_txrate_gi {
++	NL80211_TXRATE_DEFAULT_GI,
++	NL80211_TXRATE_FORCE_SGI,
++	NL80211_TXRATE_FORCE_LGI,
++};
++
+ /**
+  * enum nl80211_band - Frequency band
+  * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
+@@ -3801,11 +3861,6 @@ enum nl80211_ap_sme_features {
+  * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
+  *	to work properly to suppport receiving regulatory hints from
+  *	cellular base stations.
+- * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active
+- *	P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel
+- *	in the interface combinations, even when it's only used for scan
+- *	and remain-on-channel. This could be due to, for example, the
+- *	remain-on-channel implementation requiring a channel context.
+  * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of
+  *	equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station
+  *	mode
+@@ -3847,7 +3902,7 @@ enum nl80211_feature_flags {
+ 	NL80211_FEATURE_HT_IBSS				= 1 << 1,
+ 	NL80211_FEATURE_INACTIVITY_TIMER		= 1 << 2,
+ 	NL80211_FEATURE_CELL_BASE_REG_HINTS		= 1 << 3,
+-	NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL	= 1 << 4,
++	/* bit 4 is reserved - don't use */
+ 	NL80211_FEATURE_SAE				= 1 << 5,
+ 	NL80211_FEATURE_LOW_PRIORITY_SCAN		= 1 << 6,
+ 	NL80211_FEATURE_SCAN_FLUSH			= 1 << 7,
+@@ -4037,4 +4092,20 @@ struct nl80211_vendor_cmd_info {
+ 	__u32 subcmd;
+ };
+ 
++/**
++ * enum nl80211_tdls_peer_capability - TDLS peer flags.
++ *
++ * Used by tdls_mgmt() to determine which conditional elements need
++ * to be added to TDLS Setup frames.
++ *
++ * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable.
++ * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable.
++ * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable.
++ */
++enum nl80211_tdls_peer_capability {
++	NL80211_TDLS_PEER_HT = 1<<0,
++	NL80211_TDLS_PEER_VHT = 1<<1,
++	NL80211_TDLS_PEER_WMM = 1<<2,
++};
++
+ #endif /* __LINUX_NL80211_H */