kernel: remove obsolete kernel version switches for 4.14

This removes switches dependent on kernel version 4.14 as well as
several packages/modules selected only for that version.

This also removes sched-cake-virtual, which is not required anymore
now that we have only one variant of cake.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

4 files changed, 0 insertions, 243 deletions

diff --git a/package/kernel/w1-gpio-custom/Makefile b/package/kernel/w1-gpio-custom/Makefile
deleted file mode 100644
index 76581c101e..0000000000
--- a/package/kernel/w1-gpio-custom/Makefile
+++ /dev/null
@@ -1,48 +0,0 @@
-#
-# Copyright (C) 2008-2012 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=w1-gpio-custom
-PKG_RELEASE:=4
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/w1-gpio-custom
-  SUBMENU:=W1 support
-  TITLE:=Custom GPIO-based 1-wire device
-  DEPENDS:=kmod-w1 +kmod-w1-master-gpio @LINUX_4_14
-  FILES:=$(PKG_BUILD_DIR)/w1-gpio-custom.ko
-  KCONFIG:=
-endef
-
-define KernelPackage/w1-gpio-custom/description
- Kernel module to register a custom w1-gpio platform device.
-endef
-
-EXTRA_KCONFIG:= \
-	CONFIG_W1_MASTER_GPIO_CUSTOM=m
-
-EXTRA_CFLAGS:= \
-	$(patsubst CONFIG_%, -DCONFIG_%=1, $(patsubst %=m,%,$(filter %=m,$(EXTRA_KCONFIG)))) \
-	$(patsubst CONFIG_%, -DCONFIG_%=1, $(patsubst %=y,%,$(filter %=y,$(EXTRA_KCONFIG))))
-
-MAKE_OPTS:= \
-	$(KERNEL_MAKE_FLAGS) \
-	M="$(PKG_BUILD_DIR)" \
-	EXTRA_CFLAGS="$(EXTRA_CFLAGS)" \
-	$(EXTRA_KCONFIG)
-
-define Build/Compile
-	$(MAKE) -C "$(LINUX_DIR)" \
-		$(MAKE_OPTS) \
-		modules
-endef
-
-$(eval $(call KernelPackage,w1-gpio-custom))
-
diff --git a/package/kernel/w1-gpio-custom/src/Kconfig b/package/kernel/w1-gpio-custom/src/Kconfig
deleted file mode 100644
index 74b9226c5c..0000000000
--- a/package/kernel/w1-gpio-custom/src/Kconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-config W1_MASTER_GPIO_CUSTOM
-	tristate "Custom GPIO-based W1 driver"
-	depends on GENERIC_GPIO
-	select W1_GPIO
\ No newline at end of file
diff --git a/package/kernel/w1-gpio-custom/src/Makefile b/package/kernel/w1-gpio-custom/src/Makefile
deleted file mode 100644
index 6a527432c1..0000000000
--- a/package/kernel/w1-gpio-custom/src/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-${CONFIG_W1_MASTER_GPIO_CUSTOM}	+= w1-gpio-custom.o
\ No newline at end of file
diff --git a/package/kernel/w1-gpio-custom/src/w1-gpio-custom.c b/package/kernel/w1-gpio-custom/src/w1-gpio-custom.c
deleted file mode 100644
index 6928769975..0000000000
--- a/package/kernel/w1-gpio-custom/src/w1-gpio-custom.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- *  Custom GPIO-based W1 driver
- *
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *  Copyright (C) 2008 Bifferos <bifferos at yahoo.co.uk>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- * ---------------------------------------------------------------------------
- *
- *  The behaviour of this driver can be altered by setting some parameters
- *  from the insmod command line.
- *
- *  The following parameters are adjustable:
- *
- *	bus0	These four arguments must be arrays of
- *	bus1	3 unsigned integers as follows:
- *	bus2
- *	bus3	<id>,<pin>,<od>
- *
- *  where:
- *
- *  <id>	ID to used as device_id for the corresponding bus (required)
- *  <sda>	GPIO pin ID of data pin (required)
- *  <od>	Pin is configured as open drain.
- *
- *  See include/w1-gpio.h for more information about the parameters.
- *
- *  If this driver is built into the kernel, you can use the following kernel
- *  command line parameters, with the same values as the corresponding module
- *  parameters listed above:
- *
- *	w1-gpio-custom.bus0
- *	w1-gpio-custom.bus1
- *	w1-gpio-custom.bus2
- *	w1-gpio-custom.bus3
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <linux/w1-gpio.h>
-
-#define DRV_NAME	"w1-gpio-custom"
-#define DRV_DESC	"Custom GPIO-based W1 driver"
-#define DRV_VERSION	"0.1.2"
-
-#define PFX		DRV_NAME ": "
-
-#define BUS_PARAM_ID		0
-#define BUS_PARAM_PIN		1
-#define BUS_PARAM_OD		2
-
-#define BUS_PARAM_REQUIRED	3
-#define BUS_PARAM_COUNT		3
-#define BUS_COUNT_MAX		4
-
-static unsigned int bus0[BUS_PARAM_COUNT] __initdata;
-static unsigned int bus1[BUS_PARAM_COUNT] __initdata;
-static unsigned int bus2[BUS_PARAM_COUNT] __initdata;
-static unsigned int bus3[BUS_PARAM_COUNT] __initdata;
-
-static unsigned int bus_nump[BUS_COUNT_MAX] __initdata;
-
-#define BUS_PARM_DESC " config -> id,pin,od"
-
-module_param_array(bus0, uint, &bus_nump[0], 0);
-MODULE_PARM_DESC(bus0, "bus0" BUS_PARM_DESC);
-module_param_array(bus1, uint, &bus_nump[1], 0);
-MODULE_PARM_DESC(bus1, "bus1" BUS_PARM_DESC);
-module_param_array(bus2, uint, &bus_nump[2], 0);
-MODULE_PARM_DESC(bus2, "bus2" BUS_PARM_DESC);
-module_param_array(bus3, uint, &bus_nump[3], 0);
-MODULE_PARM_DESC(bus3, "bus3" BUS_PARM_DESC);
-
-static struct platform_device *devices[BUS_COUNT_MAX];
-static unsigned int nr_devices;
-
-static void w1_gpio_custom_cleanup(void)
-{
-	int i;
-
-	for (i = 0; i < nr_devices; i++)
-		if (devices[i])
-			platform_device_unregister(devices[i]);
-}
-
-static int __init w1_gpio_custom_add_one(unsigned int id, unsigned int *params)
-{
-	struct platform_device *pdev;
-	struct w1_gpio_platform_data pdata;
-	int err;
-
-	if (!bus_nump[id])
-		return 0;
-
-	if (bus_nump[id] < BUS_PARAM_REQUIRED) {
-		printk(KERN_ERR PFX "not enough parameters for bus%d\n", id);
-		err = -EINVAL;
-		goto err;
-	}
-
-	pdev = platform_device_alloc("w1-gpio", params[BUS_PARAM_ID]);
-	if (!pdev) {
-		err = -ENOMEM;
-		goto err;
-	}
-
-	pdata.pin = params[BUS_PARAM_PIN];
-	pdata.is_open_drain = params[BUS_PARAM_OD] ? 1 : 0;
-	pdata.enable_external_pullup = NULL;
-	pdata.ext_pullup_enable_pin = -EINVAL;
-
-	err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
-	if (err)
-		goto err_put;
-
-	err = platform_device_add(pdev);
-	if (err)
-		goto err_put;
-
-	devices[nr_devices++] = pdev;
-	return 0;
-
- err_put:
-	platform_device_put(pdev);
- err:
-	return err;
-}
-
-static int __init w1_gpio_custom_probe(void)
-{
-	int err;
-
-	nr_devices = 0;
-	printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n");
-
-	err = w1_gpio_custom_add_one(0, bus0);
-	if (err)
-		goto err;
-
-	err = w1_gpio_custom_add_one(1, bus1);
-	if (err)
-		goto err;
-
-	err = w1_gpio_custom_add_one(2, bus2);
-	if (err)
-		goto err;
-
-	err = w1_gpio_custom_add_one(3, bus3);
-	if (err)
-		goto err;
-
-	if (!nr_devices) {
-		printk(KERN_ERR PFX "no bus parameter(s) specified\n");
-		err = -ENODEV;
-		goto err;
-	}
-
-	return 0;
-
-err:
-	w1_gpio_custom_cleanup();
-	return err;
-}
-
-#ifdef MODULE
-static int __init w1_gpio_custom_init(void)
-{
-	return w1_gpio_custom_probe();
-}
-module_init(w1_gpio_custom_init);
-
-static void __exit w1_gpio_custom_exit(void)
-{
-	w1_gpio_custom_cleanup();
-}
-module_exit(w1_gpio_custom_exit);
-#else
-subsys_initcall(w1_gpio_custom_probe);
-#endif /* MODULE*/
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Bifferos <bifferos at yahoo.co.uk >");
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_VERSION(DRV_VERSION);