layerscape: add 64b/32b target for ls1012ardb device

The QorIQ LS1012A processor, optimized for battery-backed or
USB-powered, integrates a single ARM Cortex-A53 core with a hardware
packet forwarding engine and high-speed interfaces to deliver
line-rate networking performance.
QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance
development platform, with a complete debugging environment.
The LS1012ARDB board supports the QorIQ LS1012A processor and is
optimized to support the high-bandwidth DDR3L memory and
a full complement of high-speed SerDes ports.

LEDE/OPENWRT will auto strip executable program file while make. So we
need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network
fiemware be destroyed, then run make to build ls1012ardb firmware.

The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message.
This issue have noticed the IP owner for investigate, hope he can solve it
earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default
firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4"
bootargs.

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>

1 files changed, 86 insertions, 0 deletions

diff --git a/package/firmware/ppfe-firmware/Makefile b/package/firmware/ppfe-firmware/Makefile
new file mode 100644
index 0000000000..ee0305b6ff
--- /dev/null
+++ b/package/firmware/ppfe-firmware/Makefile
@@ -0,0 +1,86 @@
+#
+# Copyright (C) 2016 Jiang Yutang <jiangyutang1978@gmail.com>
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=ppfe
+PKG_VERSION:=v1.0
+PKG_RELEASE:=1
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_SOURCE_URL:=https://github.com/fsl-jyt/ppfe.git
+PKG_SOURCE_VERSION:=b9bb5cc690c0aab2592eb9d443ef55cc9dff8557
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPL-2.0 GPL-2.0+
+PKG_LICENSE_FILES:=Licenses/README
+
+include $(INCLUDE_DIR)/package.mk
+
+define ppfe/Default
+	TITLE:=
+	CONFIG:=
+endef
+
+define ppfe/ls1012ardb
+	TITLE:=PPFE firmware $(PKG_NAME)-$(PKG_VERSION) for NXP ls1012a Dev Board\
+			(must enable CONFIG_NO_STRIP=y for avoid firmware be broke)
+	CONFIG:=ls1012a/Freescale-Binary-EULA ls1012a/ppfe_class_ls1012a.elf ls1012a/ppfe_tmu_ls1012a.elf
+endef
+
+PPFES := \
+	ls1012ardb
+
+define Package/ppfe/template
+define Package/ppfe-$(1)
+	SECTION:=firmware
+	CATEGORY:=Firmware
+	DEPENDS:=@TARGET_layerscape
+	TITLE:=$(2)
+	URL:=https://github.com/fsl-jyt/ppfe.git
+	VARIANT:=$(1)
+	MAINTAINER:=Jiang Yutang <jiangyutang1978@gmail.com>
+endef
+endef
+
+define BuildPPFEPackage
+	$(eval $(ppfe/Default))
+	$(eval $(ppfe/$(1)))
+	$(call Package/ppfe/template,$(1),$(TITLE))
+endef
+
+ifdef BUILD_VARIANT
+$(eval $(call ppfe/$(BUILD_VARIANT)))
+PPFE_CONFIG:=$(if $(CONFIG),$(CONFIG),$(BUILD_VARIANT))
+endif
+
+define Build/Compile
+endef
+
+define Package/ppfe/install/default
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(foreach i,$(PPFE_CONFIG), \
+		$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(i) $(1)/lib/firmware/ ;\
+	)
+endef
+
+define Package/ppfe/install/template
+define Package/ppfe-$(1)/install
+	$(call Package/ppfe/install/default,$$(1),$(2))
+endef
+endef
+
+$(foreach p,$(PPFES), \
+	$(eval $(call Package/ppfe/install/template,$(p),$(p))) \
+)
+
+$(foreach p,$(PPFES), \
+	$(eval $(call BuildPPFEPackage,$(p))) \
+	$(eval $(call BuildPackage,ppfe-$(p))) \
+)