comgt: port 3g.sh to netifd

SVN-Revision: 28634

5 files changed, 0 insertions, 216 deletions

diff --git a/package/comgt/files/3g.button b/package/comgt/files/3g.button
deleted file mode 100644
index 57f4286073..0000000000
--- a/package/comgt/files/3g.button
+++ /dev/null
@@ -1,36 +0,0 @@
-button_action() {(
-	# use led for keeping track of the state
-	case "$(cat /proc/diag/led/3g_green)" in
-		1)
-			ifdown "$1"
-			ifup wan
-		;;
-		0)
-			ifdown wan
-			ifup "$1"
-		;;
-	esac
-)}
-
-[ "$ACTION" = "released" -a "$BUTTON" = "3g" ] && {
-	HOTPLUG="$(cat /proc/sys/kernel/hotplug)"
-	(echo /bin/true > /proc/sys/kernel/hotplug)
-
-	include /lib/network
-	scan_interfaces
-	config_cb() {
-		config_get TYPE "$CONFIG_SECTION" TYPE
-		case "$TYPE" in
-			interface)
-				config_get proto "$CONFIG_SECTION" proto
-				config_get button "$CONFIG_SECTION" button
-				case "$button" in
-					1|on|enabled) [ "$proto" = "3g" ] && button_action "$CONFIG_SECTION";;
-				esac
-			;;
-		esac
-	}
-	config_load network
-
-	(echo $HOTPLUG > /proc/sys/kernel/hotplug)
-} &
diff --git a/package/comgt/files/3g.connect b/package/comgt/files/3g.connect
deleted file mode 100644
index 04f45f9de6..0000000000
--- a/package/comgt/files/3g.connect
+++ /dev/null
@@ -1,4 +0,0 @@
-#!/bin/sh
-. /lib/network/3g.sh
-set_3g_led 1 1 1
-/usr/sbin/chat -V -E -f /etc/chatscripts/3g.chat
diff --git a/package/comgt/files/3g.iface b/package/comgt/files/3g.iface
deleted file mode 100644
index a89f053873..0000000000
--- a/package/comgt/files/3g.iface
+++ /dev/null
@@ -1,15 +0,0 @@
-include /lib/network
-config_load network
-scan_interfaces
-config_get proto "$INTERFACE" proto
-[ "$proto" = "3g" ] && {
-	config_get iface "$INTERFACE" ifname
-	case "$ACTION" in
-		ifup)
-			set_3g_led 1 1 0
-		;;
-		ifdown)
-			set_3g_led 0 0 0
-		;;
-	esac
-}
diff --git a/package/comgt/files/3g.sh b/package/comgt/files/3g.sh
deleted file mode 100644
index 616beec4c4..0000000000
--- a/package/comgt/files/3g.sh
+++ /dev/null
@@ -1,119 +0,0 @@
-set_3g_led() {
-	# set on WRT54G3G only
-	[ -f /proc/diag/model ] || return 0
-	grep -q "WRT54G3G" /proc/diag/model >/dev/null || return 0
-	echo "$1" > /proc/diag/led/3g_green
-	echo "$2" > /proc/diag/led/3g_blue
-	grep -q "WRT54G3G$" /proc/diag/model >/dev/null || return 0
-	echo "$3" > /proc/diag/led/3g_blink
-}
-
-scan_3g() {
-	local device
-	config_get device "$1" device
-
-	# try to figure out the device if it's invalid
-	[ -n "$device" -a -e "$device" ] || {
-		for device in /dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2 /dev/tts/2 /dev/usb/tts/0 /dev/noz0; do
-			[ -e "$device" ] && {
-				config_set "$1" device "$device"
-				break
-			}
-		done
-	}
-
-	# enable 3G with the 3G button by default
-	local button
-	config_get button "$1" button
-	[ -z "$button" ] && {
-		config_set "$1" button 1
-	}
-}
-
-stop_interface_3g() {
-	stop_interface_ppp "$1"
-	set_3g_led 0 0 0
-	killall gcom >/dev/null 2>/dev/null
-}
-
-setup_interface_3g() {
-	local iface="$1"
-	local config="$2"
-	local chat="/etc/chatscripts/3g.chat"
-
-	local device
-	config_get device "$config" device
-
-	local maxwait
-	config_get maxwait "$config" maxwait
-	maxwait=${maxwait:-20}
-	while [ ! -e "$device" -a $maxwait -gt 0 ];do # wait for driver loading to catch up
-		maxwait=$(($maxwait - 1))
-		sleep 1
-	done
-
-	for module in slhc ppp_generic ppp_async; do
-		/sbin/insmod $module 2>&- >&-
-	done
-
-	local apn
-	config_get apn "$config" apn
-
-	local service
-	config_get service "$config" service
-
-	local pincode
-	config_get pincode "$config" pincode
-
-	local mtu
-	config_get mtu "$config" mtu
-
-	set_3g_led 1 0 1
-
-	# figure out hardware specific commands for the card
-	case "$service" in
-		cdma|evdo) chat="/etc/chatscripts/evdo.chat";;
-	*)
-		cardinfo=$(gcom -d "$device" -s /etc/gcom/getcardinfo.gcom)
-		if echo "$cardinfo" | grep Novatel; then
-			case "$service" in
-				umts_only) CODE=2;;
-				gprs_only) CODE=1;;
-				*) CODE=0;;
-			esac
-			mode="AT\$NWRAT=${CODE},2"
-		elif echo "$cardinfo" | grep Option; then
-			case "$service" in
-				umts_only) CODE=1;;
-				gprs_only) CODE=0;;
-				*) CODE=3;;
-			esac
-			mode="AT_OPSYS=${CODE}"
-		fi
-		# Don't assume Option to be default as it breaks with Huawei Cards/Sticks
-
-		test -z "$pincode" || {
-			PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
-				echo "$config(3g): Failed to set the PIN code."
-				set_3g_led 0 0 0
-				return 1
-			}
-		}
-		test -z "$mode" || {
-			MODE="$mode" gcom -d "$device" -s /etc/gcom/setmode.gcom
-		}
-	esac
-	set_3g_led 1 0 0
-
-	config_set "$config" "connect" "${apn:+USE_APN=$apn }/usr/sbin/chat -t5 -v -E -f $chat"
-	start_pppd "$config" \
-		noaccomp \
-		nopcomp \
-		novj \
-		nobsdcomp \
-		noauth \
-		lock \
-		crtscts \
-		${mtu:+mtu $mtu mru $mtu} \
-		115200 "$device"
-}
diff --git a/package/comgt/files/3g.usb b/package/comgt/files/3g.usb
deleted file mode 100644
index ba6c646177..0000000000
--- a/package/comgt/files/3g.usb
+++ /dev/null
@@ -1,42 +0,0 @@
-#!/bin/sh
-
-. /etc/functions.sh
-
-log() {
-	logger -t 3g-hotplug "$@"
-}
-
-find_3g_iface() {
-	local cfg="$1"
-	local tty="$2"
-
-	local proto
-	config_get proto "$cfg" proto
-	[ "$proto" = 3g ] || return 0
-
-	local auto
-	config_get_bool auto "$cfg" auto 1
-	[ "$auto" = 1 ] || [ "$ACTION" = remove ] || return 0
-
-	local dev
-	config_get dev "$cfg" device
-
-	if [ "${dev##*/}" = "${tty##*/}" ]; then
-		if [ "$ACTION" = add ]; then
-			log "Starting interface $cfg for device ${dev##*/}"
-			( sleep 1; /sbin/ifup "$cfg" ) &
-		else
-			log "Stopping interface $cfg for device ${dev##*/}"
-			/sbin/ifdown "$cfg" &
-		fi
-	fi
-}
-
-case "$DEVICENAME" in
-	tty*)
-		[ -e "/dev/$DEVICENAME" ] || [ "$ACTION" = remove ] || exit 0
-		config_load network
-		config_foreach find_3g_iface interface "/dev/$DEVICENAME"
-	;;
-esac
-