diff options
| author | Giulio Lorenzo <salveenee@mortemale.org> | 2020-10-06 14:14:31 +0200 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2021-05-17 01:01:32 +0200 |
| commit | b108ed0ab09492d8d5a1775714da1ee34ce475ee (patch) | |
| tree | 8c742e2a09dd6bf5ca8150b62134cdc0eb43f533 /package/boot | |
| parent | 3dd9f82fecd3a13ff4fa9d109bbe5b137df3f787 (diff) | |
| download | upstream-b108ed0ab09492d8d5a1775714da1ee34ce475ee.tar.gz upstream-b108ed0ab09492d8d5a1775714da1ee34ce475ee.tar.bz2 upstream-b108ed0ab09492d8d5a1775714da1ee34ce475ee.zip | |
ath79: add support for ZiKing CPE46B
ZiKing CPE46B is a POE outdoor 2.4ghz device with an integrated directional
antenna. It is low cost and mostly available via Aliexpress, references can
be found at:
- https://forum.openwrt.org/t/anddear-ziking-cpe46b-ar9331-ap121/60383
- https://git.lsd.cat/g/openwrt-cpe46b
Specifications:
- Atheros AR9330
- 32MB of RAM
- 8MB of flash (SPI NOR)
- 1 * 2.4ghz integrated antenna
- 2 * 10/100/1000 ethernet ports (1 POE)
- 3 * Green LEDs controlled by the SoC
- 3 * Green LEDs controlled via GPIO
- 1 * Reset Button controlled via GPIO
- 1 * 4 pin serial header on the PCB
- Outdoor packaging
Flashing instruction:
You can use sysupgrade image directly in vendor firmware which is based
on OpenWrt/LEDE. In case of issues with the vendor GUI, the vendor
Telnet console is vulnerable to command injection and can be used to gain
a shell directly on the OEM OpenWrt distribution.
Signed-off-by: Giulio Lorenzo <salveenee@mortemale.org>
[fix whitespaces, drop redundant uart status and serial0, drop
num-chipselects, drop 0x1002 MAC address for wmac]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'package/boot')
| -rw-r--r-- | package/boot/uboot-envtools/files/ath79 | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79 index d0353c9023..7b0692e59f 100644 --- a/package/boot/uboot-envtools/files/ath79 +++ b/package/boot/uboot-envtools/files/ath79 @@ -61,6 +61,7 @@ ubnt,nanostation-m|\ yuncore,a770|\ yuncore,a782|\ yuncore,xd4200|\ +ziking,cpe46b|\ zyxel,nbg6616) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000" ;; |