finally move buildroot-ng to trunk

65 files changed, 2588 insertions, 0 deletions

diff --git a/package/base-files/Makefile b/package/base-files/Makefile
new file mode 100644
index 0000000000..9f6da3bc7c
--- /dev/null
+++ b/package/base-files/Makefile
@@ -0,0 +1,191 @@
+# 
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+# $Id$
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=base-files
+PKG_RELEASE:=8
+
+PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)
+
+REV:=$(shell LANG=C svn info | awk '/^Revision:/ { print$$2 }' )
+ifeq ($(REV),)
+  REV:=0
+endif
+
+include $(INCLUDE_DIR)/package.mk
+
+ifneq ($(DUMP),1)
+  TARGET:=-$(BOARD)-$(KERNEL)
+  UCLIBC_VERSION:=${shell cat $(STAGING_DIR)/uclibc_version 2>/dev/null}
+  LIBGCC_VERSION:=${shell cat $(STAGING_DIR)/gcc_version 2>/dev/null}
+else
+  UCLIBC_VERSION:=<UCLIBC_VERSION>
+  LIBGCC_VERSION:=<LIBGCC_VERSION>
+endif
+
+CONFIG_PACKAGE_base-files$(TARGET):=$(CONFIG_PACKAGE_base-files)
+
+define Package/base-files$(TARGET)
+  SECTION:=base
+  CATEGORY:=Base system
+  DEFAULT:=y
+  TITLE:=Base filesystem for OpenWrt
+  DESCRIPTION:=\
+	This package contains a base filesystem and system scripts for OpenWrt.
+  URL:=http://openwrt.org/
+  VERSION:=$(PKG_RELEASE)-$(REV)
+endef
+
+define -ar7-2.4/conffiles
+/etc/config/network
+endef
+
+define -aruba-2.6/conffiles
+/etc/config/network
+endef
+
+define -au1000-2.6/conffiles
+/etc/config/network
+endef
+
+define -rb532-2.6/conffiles
+/etc/config/network
+endef
+
+define -sibyte-2.6/conffiles
+/etc/config/network
+endef
+
+define -x86-2.6/conffiles
+/etc/config/network
+endef
+
+define -xscale-2.6/conffiles
+/etc/config/network
+endef
+
+define Package/base-files$(TARGET)/conffiles
+/etc/banner
+/etc/hosts
+/etc/inittab
+/etc/group
+/etc/passwd
+/etc/profile
+/etc/shells
+/etc/ipkg.conf
+/etc/sysctl.conf
+$(call $(TARGET)/conffiles)
+endef
+
+define Package/libgcc
+  SECTION:=libs
+  CATEGORY:=Base system
+  DEFAULT:=y
+  DEPENDS:=@!NATIVE_TOOLCHAIN
+  TITLE:=GCC support library
+  URL:=http://gcc.gnu.org/
+  VERSION:=$(LIBGCC_VERSION)-$(PKG_RELEASE)
+endef
+
+define Package/libpthread
+  SECTION:=libs
+  CATEGORY:=Libraries
+  DEPENDS:=@!NATIVE_TOOLCHAIN
+  TITLE:=POSIX thread library
+  URL:=http://uclibc.org/
+  VERSION:=$(UCLIBC_VERSION)-$(PKG_RELEASE)
+endef
+
+define Package/uclibc
+  SECTION:=libs
+  CATEGORY:=Base system
+  DEFAULT:=y
+  DEPENDS:=@!NATIVE_TOOLCHAIN
+  TITLE:=C library embedded systems
+  URL:=http://uclibc.org/
+  VERSION:=$(UCLIBC_VERSION)-$(PKG_RELEASE)
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+endef
+
+define Build/Compile/ar7
+	$(TARGET_CC) -o $(PKG_BUILD_DIR)/adam2patcher src/adam2patcher.c
+endef
+
+define Build/Compile/brcm
+	$(TARGET_CC) -o $(PKG_BUILD_DIR)/jffs2root src/jffs2root.c
+endef
+
+define Build/Compile
+  $(call Build/Compile/$(BOARD))
+endef
+
+
+define Package/base-files$(TARGET)/install-ar7
+	mkdir -p $(1)/sbin
+	$(CP) $(PKG_BUILD_DIR)/adam2patcher $(1)/sbin
+endef
+
+define Package/base-files$(TARGET)/install-brcm
+	rm -f $(1)/etc/config/network
+	mkdir -p $(1)/sbin
+	$(CP) $(PKG_BUILD_DIR)/jffs2root $(1)/sbin
+endef
+
+define Package/base-files$(TARGET)/install
+	$(CP) ./default/* $(1)/
+	if [ -d $(BOARD)-$(KERNEL) ]; then \
+		$(CP) $(BOARD)-$(KERNEL)/* $(1)/; \
+	fi
+	$(SED) 's,$$$$R,r$(REV),g' $(1)/etc/banner
+	$(SED) 's,$$$$S,$(BOARD)-$(KERNEL),g' $(1)/etc/ipkg.conf
+	mkdir -p $(1)/dev
+	mkdir -p $(1)/etc/crontabs
+	mkdir -p $(1)/jffs
+	mkdir -p $(1)/lib
+	mkdir -p $(1)/mnt
+	mkdir -p $(1)/proc
+	mkdir -p $(1)/tmp
+	mkdir -p $(1)/usr/lib
+	mkdir -p $(1)/usr/bin
+	mkdir -p $(1)/sys
+	mkdir -p $(1)/www
+	ln -sf /proc/mounts $(1)/etc/mtab
+	rm -f $(1)/var
+	ln -sf /tmp $(1)/var
+	mkdir -p $(1)/etc
+$(call Package/base-files$(TARGET)/install-$(BOARD),$(1))
+endef
+
+define Package/libgcc/install
+	install -m0755 -d $(1)/lib
+	$(CP) $(STAGING_DIR)/lib/libgcc_s.so.* $(1)/lib/
+endef
+
+define Package/libpthread/install
+	install -m0755 -d $(1)/lib
+	$(CP) $(STAGING_DIR)/lib/libpthread.so.* $(1)/lib/
+	$(CP) $(STAGING_DIR)/lib/libpthread-$(UCLIBC_VERSION).so $(1)/lib/
+endef
+
+define Package/uclibc/install
+	install -m0755 -d $(1)/lib
+	for file in ld-uClibc libc libcrypt libdl libm libnsl libresolv librt libuClibc libutil; do \
+		$(CP) $(STAGING_DIR)/lib/$$$$file.so.* $(1)/lib/; \
+		$(CP) $(STAGING_DIR)/lib/$$$$file-$(UCLIBC_VERSION).so $(1)/lib/; \
+	done
+endef
+
+$(eval $(call BuildPackage,base-files$(TARGET)))
+$(eval $(call BuildPackage,libgcc))
+$(eval $(call BuildPackage,libpthread))
+$(eval $(call BuildPackage,uclibc))
diff --git a/package/base-files/ar7-2.4/bin/firstboot b/package/base-files/ar7-2.4/bin/firstboot
new file mode 100755
index 0000000000..774bbc754b
--- /dev/null
+++ b/package/base-files/ar7-2.4/bin/firstboot
@@ -0,0 +1,89 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+rom=$(awk '/squashfs/ {print $2}' /proc/mounts)
+jffs=$(awk '/jffs2/ {print $2}' /proc/mounts)
+
+dupe() { # <new_root> <old_root>
+	cd $1
+	echo -n "creating directories... "
+	{
+		cd $2 
+		find . -xdev -type d
+		echo "./dev ./jffs ./mnt ./proc ./tmp ./sys"
+		# xdev skips mounted directories
+		cd $1 
+	} | xargs mkdir -p
+	echo "done"
+
+	echo -n "setting up symlinks... "
+	for file in $(cd $2; find . -xdev -type f;); do
+		case "$file" in
+		./rom/note) ;; #nothing
+		./etc/config*|\
+		./etc/resolv.conf|\
+		./usr/lib/ipkg/info) cp -af $2/$file $file;;
+		*) ln -sf /rom/${file#./*} $file;;
+		esac
+	done
+	for file in $(cd $2; find . -xdev -type l;); do
+		cp -af $2/${file#./*} $file
+	done
+	echo "done"
+}
+
+pivot() { # <new_root> <old_root>
+	mount -o move /proc $1/proc && \
+	pivot_root $1 $1$2 && {
+		mount -o move $2/dev /dev
+		mount -o move $2/tmp /tmp
+		mount -o move $2/sys /sys
+		return 0
+	}
+}
+
+mountdp() { # <device> <mount_point> <ignored> <fs>
+        dev=$1; mnt=$2; shift 2; opt=$*
+	mount $dev $mnt $opt
+	dupe $mnt $rom
+	pivot $mnt /rom
+}
+
+ramoverlay() {
+	mkdir -p /tmp/root
+	mountdp /tmp/root /mnt -o bind
+}
+
+[ "${0##*/}" = "firstboot" ] && {
+	[ -z "$rom" ] && {
+		echo "You do not have a squashfs partition; aborting"
+		echo "(firstboot cannot be run on jffs2 based firmwares)"
+		exit 1
+	}
+
+	[ "$1" = "switch2jffs" ] && {
+		mtd erase OpenWrt
+		mount -o remount,ro none / # try to avoid fs changing while copying
+		mount -o bind / /mnt
+		mount /dev/mtdblock/4 /rom/jffs -t jffs2
+		echo -n "copying files ... "
+		cp -a /mnt/* /rom/jffs
+		umount /mnt
+		echo "done"
+		pivot /rom /mnt
+		mount -o move /mnt /tmp/root
+		pivot /jffs /rom
+		exit 0
+	}
+
+	# script run manually
+	[ \! -z "$jffs" ] && {
+		echo "firstboot has already been run"
+		echo "jffs2 partition is mounted, only resetting files"
+		dupe $jffs $rom
+		exit 0
+	}
+
+	mtd erase OpenWrt
+	mountdp /dev/mtdblock/4 /jffs -t jffs2
+}
diff --git a/package/base-files/ar7-2.4/etc/config/network b/package/base-files/ar7-2.4/etc/config/network
new file mode 100644
index 0000000000..911134bb0d
--- /dev/null
+++ b/package/base-files/ar7-2.4/etc/config/network
@@ -0,0 +1,14 @@
+# Network configuration file
+
+config interface loopback
+	option ifname	lo
+	option proto	static
+	option ipaddr	127.0.0.1
+	option netmask	255.0.0.0
+
+config interface lan
+	option ifname	eth0
+	option proto	static
+	option ipaddr	192.168.1.1
+	option netmask	255.255.255.0
+
diff --git a/package/base-files/ar7-2.4/etc/init.d/S00adam2 b/package/base-files/ar7-2.4/etc/init.d/S00adam2
new file mode 100755
index 0000000000..5f5b3504c2
--- /dev/null
+++ b/package/base-files/ar7-2.4/etc/init.d/S00adam2
@@ -0,0 +1,12 @@
+#!/bin/sh /etc/rc.common
+# ADAM2 patcher for Netgear DG834 and compatible
+# Copyright (C) 2006 OpenWrt.org
+
+start() {
+	MD5="$(md5sum /dev/mtdblock/0  | awk '{print $1}')"
+	[ "$MD5" = "0530bfdf00ec155f4182afd70da028c1" ] && {
+		mtd unlock adam2
+		/sbin/adam2patcher /dev/mtdblock/0
+	}
+	rm -f /etc/init.d/S00adam2 /sbin/adam2patcher >&- 2>&-
+}
diff --git a/package/base-files/ar7-2.4/etc/preinit b/package/base-files/ar7-2.4/etc/preinit
new file mode 100755
index 0000000000..5b676ca3ac
--- /dev/null
+++ b/package/base-files/ar7-2.4/etc/preinit
@@ -0,0 +1,11 @@
+#!/bin/sh
+export PATH=/bin:/sbin:/usr/bin:/usr/sbin
+mount none /proc -t proc
+
+[ -f /etc/preinit.arch ] && . /etc/preinit.arch
+[ -z "$FAILSAFE" ] || {
+	echo /bin/true > /proc/sys/kernel/hotplug
+	telnetd -l /bin/login <> /dev/null 2>&1
+}
+mount_root ${FAILSAFE:+failsafe}
+exec /sbin/init
diff --git a/package/base-files/ar7-2.4/sbin/mount_root b/package/base-files/ar7-2.4/sbin/mount_root
new file mode 100755
index 0000000000..6b90bdc9cc
--- /dev/null
+++ b/package/base-files/ar7-2.4/sbin/mount_root
@@ -0,0 +1,28 @@
+#!/bin/sh
+size=$(awk '/Mem:/ {l=5242880;print((s=$2/2)<l)?$2-l:s}' /proc/meminfo)
+mount none /tmp -t tmpfs -o size=$size
+
+if [ "$1" != "failsafe" ]; then 
+	mtd unlock linux
+	mount | grep jffs2 >&-
+	if [ $? = 0 ] ; then
+		if [ $(cat /proc/mtd | wc -l) = 6 ]; then
+			mtd erase OpenWrt
+		else
+			mount -o remount,rw /dev/root /
+		fi
+	else
+		. /bin/firstboot
+		echo "switching to jffs2"
+		mount /dev/mtdblock/4 /jffs -t jffs2
+		pivot /jffs /rom || {
+			echo "jffs2 unusable; using ramdisk"
+			ramoverlay
+		}
+	fi
+fi
+
+mount none /tmp -t tmpfs -o remount,nosuid,nodev,mode=1777
+mkdir -p /dev/pts
+mount none /dev/pts -t devpts
+mount -t sysfs none /sys 2>&-
diff --git a/package/base-files/aruba-2.6/etc/config/network b/package/base-files/aruba-2.6/etc/config/network
new file mode 100644
index 0000000000..1d9b55b2d3
--- /dev/null
+++ b/package/base-files/aruba-2.6/etc/config/network
@@ -0,0 +1,11 @@
+# Network configuration file
+
+config interface loopback
+	option ifname	lo
+	option proto	static
+	option ipaddr	127.0.0.1
+	option netmask	255.0.0.0
+
+config interface lan
+	option ifname	eth0
+	option proto	dhcp
diff --git a/package/base-files/au1000-2.6/etc/config/network b/package/base-files/au1000-2.6/etc/config/network
new file mode 100644
index 0000000000..9b65652f06
--- /dev/null
+++ b/package/base-files/au1000-2.6/etc/config/network
@@ -0,0 +1,14 @@
+# Copyright (C) 2006 OpenWrt.org
+
+config interface loopback
+	option ifname	lo
+	option proto	static
+	option ipaddr	127.0.0.1
+	option netmask	255.0.0.0
+
+config interface lan
+	option type 	bridge
+	option ifname	"eth0 ath0"
+	option proto	static
+	option ipaddr	192.168.1.1
+	option netmask	255.255.255.0
diff --git a/package/base-files/au1000-2.6/sbin/mount_root b/package/base-files/au1000-2.6/sbin/mount_root
new file mode 100755
index 0000000000..718394ca4c
--- /dev/null
+++ b/package/base-files/au1000-2.6/sbin/mount_root
@@ -0,0 +1,26 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+mount none /proc -t proc
+size=$(awk '/Mem:/ {l=5242880;print((s=$2/2)<l)?$2-l:s}' /proc/meminfo)
+mount none /tmp -t tmpfs -o size=$size
+
+if [ "$1" != "failsafe" ]; then 
+	mtd unlock filesystem
+	mount | grep jffs2 >&-
+	if [ $? = 0 ] ; then
+		if [ $(cat /proc/mtd | wc -l) = 6 ]; then
+			mtd erase filesystem
+			jffs2root --move
+		else
+			mount -o remount,rw /dev/root /
+		fi
+	else
+		. /bin/firstboot
+	fi
+fi
+
+mount none /tmp -t tmpfs -o remount,nosuid,nodev,mode=1777
+mkdir -p /dev/pts
+mount none /dev/pts -t devpts
+mount -t sysfs none /sys 2>&-
diff --git a/package/base-files/brcm-2.4/bin/firstboot b/package/base-files/brcm-2.4/bin/firstboot
new file mode 100755
index 0000000000..b65d3ee98b
--- /dev/null
+++ b/package/base-files/brcm-2.4/bin/firstboot
@@ -0,0 +1,90 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+rom=$(awk '/squashfs/ {print $2}' /proc/mounts)
+jffs=$(awk '/jffs2/ {print $2}' /proc/mounts)
+
+dupe() { # <new_root> <old_root>
+	cd $1
+	echo -n "creating directories... "
+	{
+		cd $2 
+		find . -xdev -type d
+		echo "./dev ./jffs ./mnt ./proc ./tmp ./sys"
+		# xdev skips mounted directories
+		cd $1 
+	} | xargs mkdir -p
+	echo "done"
+
+	echo -n "setting up symlinks... "
+	for file in $(cd $2; find . -xdev -type f;); do
+		case "$file" in
+		./rom/note) ;; #nothing
+		./etc/config*|\
+		./etc/resolv.conf|\
+		./usr/lib/ipkg/info/*) cp -af $2/$file $file;;
+		*) ln -sf /rom/${file#./*} $file;;
+		esac
+	done
+	for file in $(cd $2; find . -xdev -type l;); do
+		cp -af $2/${file#./*} $file
+	done
+	echo "done"
+}
+
+pivot() { # <new_root> <old_root>
+	mount -o move /proc $1/proc && \
+	pivot_root $1 $1$2 && {
+		mount -o move $2/dev /dev
+		mount -o move $2/tmp /tmp
+		mount -o move $2/sys /sys
+		return 0
+	}
+}
+
+mountdp() { # <device> <mount_point> <ignored> <fs>
+        dev=$1; mnt=$2; shift 2; opt=$*
+	mount $dev $mnt $opt
+	dupe $mnt $rom
+	pivot $mnt /rom
+}
+
+ramoverlay() {
+	mkdir -p /tmp/root
+	mountdp /tmp/root /mnt -o bind
+}
+
+[ "${0##*/}" = "firstboot" ] && {
+	[ -z "$rom" ] && {
+		echo "You do not have a squashfs partition; aborting"
+		echo "(firstboot cannot be run on jffs2 based firmwares)"
+		exit 1
+	}
+
+	[ "$1" = "switch2jffs" ] && {
+		mtd erase OpenWrt
+		mount -o remount,ro none / # try to avoid fs changing while copying
+		mount -o bind / /mnt
+		mount /dev/mtdblock/4 /rom/jffs -t jffs2
+		echo -n "copying files ... "
+		cp -a /mnt/* /rom/jffs
+		umount /mnt
+		echo "done"
+		pivot /rom /mnt
+		mount -o move /mnt /tmp/root
+		pivot /jffs /rom
+		jffs2root --clean
+		exit 0
+	}
+
+	# script run manually
+	[ \! -z "$jffs" ] && {
+		echo "firstboot has already been run"
+		echo "jffs2 partition is mounted, only resetting files"
+		dupe $jffs $rom
+		exit 0
+	}
+
+	mtd erase OpenWrt
+	mountdp /dev/mtdblock/4 /jffs -t jffs2
+}
diff --git a/package/base-files/brcm-2.4/etc/config/wireless b/package/base-files/brcm-2.4/etc/config/wireless
new file mode 100644
index 0000000000..9dc4945e07
--- /dev/null
+++ b/package/base-files/brcm-2.4/etc/config/wireless
@@ -0,0 +1,14 @@
+# Copyright (C) 2006 OpenWrt.org
+
+config wifi-device	wl0
+	option type 	broadcom
+	option channel	5
+
+config wifi-iface
+	option device	wl0
+	option mode		ap
+	option ssid 	OpenWrt
+	option hidden	0
+	option encryption none
+
+
diff --git a/package/base-files/brcm-2.4/etc/init.d/S05netconfig b/package/base-files/brcm-2.4/etc/init.d/S05netconfig
new file mode 100755
index 0000000000..71092da559
--- /dev/null
+++ b/package/base-files/brcm-2.4/etc/init.d/S05netconfig
@@ -0,0 +1,87 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006 OpenWrt.org
+
+start() {
+	[ -e /etc/config/network ] && exit 0
+
+	mkdir -p /etc/config
+
+	(
+		if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
+			# WGT634u
+			echo boardtype=wgt634u
+		else
+			strings /dev/mtdblock/3
+		fi
+	) | awk '
+	function p(cfgname, name) {
+		if (c[name] != "") print "	option " cfgname "	\"" c[name] "\""
+	}
+	
+	BEGIN {
+		FS="="
+		c["lan_ifname"]="eth0.0 wl0"
+		c["wan_ifname"]="eth0.1"
+		c["vlan0ports"]="1 2 3 4 5*"
+		c["vlan1ports"]="0 5"
+	}
+	
+	($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") {
+		nvram[$1] = $2
+	}
+	
+	END {
+		# v1 hardware
+		if (nvram["boardtype"] == "bcm94710dev") {
+			# Asus WL-500g
+			if (nvram["boardnum"] == "asusX") {
+				c["lan_ifname"]="eth0 eth1 wl0" # FIXME
+				c["wan_ifname"]=""
+			}
+		}
+		if (nvram["boardtype"] == "wgt634u") {
+			c["vlan0ports"] = "0 1 2 3 5*"
+			c["vlan1ports"] = "4 5"
+			c["lan_ifname"] = "eth0.0 ath0"
+		}
+		if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) {
+			c["vlan0ports"] = "0 1 2 3 5*"
+			c["vlan1ports"] = "4 5"
+		}
+	
+		# WAP54G
+		if ((nvram["boardnum"] == "2") || \
+			(nvram["boardnum"] == "1024")) {
+			c["lan_ifname"]="eth0 wl0"
+			c["wan_ifname"]=""
+		}
+	
+		print "#### VLAN configuration "
+		print "config switch eth0"
+		p("vlan0", "vlan0ports")
+		p("vlan1", "vlan1ports")
+		print ""
+		print ""
+		print "#### Loopback configuration"
+		print "config interface loopback"
+		print "	option ifname	\"lo\""
+		print "	option proto	static"
+		print "	option ipaddr	127.0.0.1"
+		print "	option netmask	255.0.0.0"
+		print ""
+		print ""
+		print "#### LAN configuration"
+		print "config interface lan"
+		print "	option type 	bridge"
+		p("ifname", "lan_ifname")
+		print "	option proto	static"
+		print "	option ipaddr	192.168.1.1"
+		print "	option netmask	255.255.255.0"
+		print ""
+		print ""
+		print "#### WAN configuration"
+		print "config interface	wan"
+		p("ifname", "wan_ifname")
+		print "	option proto	dhcp"
+	}' > /etc/config/network
+}
diff --git a/package/base-files/brcm-2.4/etc/preinit b/package/base-files/brcm-2.4/etc/preinit
new file mode 100755
index 0000000000..fb13e107e5
--- /dev/null
+++ b/package/base-files/brcm-2.4/etc/preinit
@@ -0,0 +1,13 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+export PATH=/bin:/sbin:/usr/bin:/usr/sbin
+mount none /proc -t proc
+
+[ -f /etc/preinit.arch ] && . /etc/preinit.arch
+[ -z "$FAILSAFE" ] || {
+	echo /bin/true > /proc/sys/kernel/hotplug
+	telnetd -l /bin/login <> /dev/null 2>&1
+}
+mount_root ${FAILSAFE:+failsafe}
+exec /sbin/init
diff --git a/package/base-files/brcm-2.4/sbin/mount_root b/package/base-files/brcm-2.4/sbin/mount_root
new file mode 100755
index 0000000000..ec82cd40fb
--- /dev/null
+++ b/package/base-files/brcm-2.4/sbin/mount_root
@@ -0,0 +1,34 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+is_dirty() {
+	grep Broadcom /proc/cpuinfo >&- || return 1
+	OFFSET="$(($(hexdump -v /dev/mtdblock/1 -s 20 -n 2 -e '"%d"')-1))"
+	return $(hexdump -v /dev/mtdblock/1 -s $OFFSET -n 1 -e '"%d"')
+}
+
+size=$(awk '/Mem:/ {l=5242880;print((s=$2/2)<l)?$2-l:s}' /proc/meminfo)
+mount none /tmp -t tmpfs -o size=$size
+
+if [ "$1" != "failsafe" ]; then 
+	mtd unlock linux
+	mount | grep jffs2 >&-
+	if [ $? = 0 ] ; then
+		mount -o remount,rw /dev/root /
+	else
+		. /bin/firstboot
+		is_dirty 
+		[ $? != 0 ] && {
+			echo "switching to jffs2"
+			mount /dev/mtdblock/4 /jffs -t jffs2
+			pivot /jffs /rom
+		} || {
+			echo "jffs2 unusable; using ramdisk"
+			ramoverlay
+		}
+	fi
+fi
+
+mount none /tmp -t tmpfs -o remount,nosuid,nodev,mode=1777
+mkdir -p /dev/pts
+mount none /dev/pts -t devpts
diff --git a/package/base-files/brcm-2.6/bin/firstboot b/package/base-files/brcm-2.6/bin/firstboot
new file mode 100755
index 0000000000..d37ce4f90b
--- /dev/null
+++ b/package/base-files/brcm-2.6/bin/firstboot
@@ -0,0 +1,90 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+rom=$(awk '/squashfs/ {print $2}' /proc/mounts)
+jffs=$(awk '/jffs2/ {print $2}' /proc/mounts)
+
+dupe() { # <new_root> <old_root>
+	cd $1
+	echo -n "creating directories... "
+	{
+		cd $2 
+		find . -xdev -type d
+		echo "./dev ./jffs ./mnt ./proc ./tmp ./sys"
+		# xdev skips mounted directories
+		cd $1 
+	} | xargs mkdir -p
+	echo "done"
+
+	echo -n "setting up symlinks... "
+	for file in $(cd $2; find . -xdev -type f;); do
+		case "$file" in
+		./rom/note) ;; #nothing
+		./etc/config*|\
+		./etc/resolv.conf|\
+		./usr/lib/ipkg/info) cp -af $2/$file $file;;
+		*) ln -sf /rom/${file#./*} $file;;
+		esac
+	done
+	for file in $(cd $2; find . -xdev -type l;); do
+		cp -af $2/${file#./*} $file
+	done
+	echo "done"
+}
+
+pivot() { # <new_root> <old_root>
+	mount -o move /proc $1/proc && \
+	pivot_root $1 $1$2 && {
+		mount -o move $2/dev /dev
+		mount -o move $2/tmp /tmp
+		mount -o move $2/sys /sys
+		return 0
+	}
+}
+
+mountdp() { # <device> <mount_point> <ignored> <fs>
+        dev=$1; mnt=$2; shift 2; opt=$*
+	mount $dev $mnt $opt
+	dupe $mnt $rom
+	pivot $mnt /rom
+}
+
+ramoverlay() {
+	mkdir -p /tmp/root
+	mountdp /tmp/root /mnt -o bind
+}
+
+[ "${0##*/}" = "firstboot" ] && {
+	[ -z "$rom" ] && {
+		echo "You do not have a squashfs partition; aborting"
+		echo "(firstboot cannot be run on jffs2 based firmwares)"
+		exit 1
+	}
+
+	[ "$1" = "switch2jffs" ] && {
+		mtd erase OpenWrt
+		mount -o remount,ro none / # try to avoid fs changing while copying
+		mount -o bind / /mnt
+		mount /dev/mtdblock/4 /rom/jffs -t jffs2
+		echo -n "copying files ... "
+		cp -a /mnt/* /rom/jffs
+		umount /mnt
+		echo "done"
+		pivot /rom /mnt
+		mount -o move /mnt /tmp/root
+		pivot /jffs /rom
+		jffs2root --clean
+		exit 0
+	}
+
+	# script run manually
+	[ \! -z "$jffs" ] && {
+		echo "firstboot has already been run"
+		echo "jffs2 partition is mounted, only resetting files"
+		dupe $jffs $rom
+		exit 0
+	}
+
+	mtd erase OpenWrt
+	mountdp /dev/mtdblock/4 /jffs -t jffs2
+}
diff --git a/package/base-files/brcm-2.6/etc/init.d/S05netconfig b/package/base-files/brcm-2.6/etc/init.d/S05netconfig
new file mode 100755
index 0000000000..e37633e18f
--- /dev/null
+++ b/package/base-files/brcm-2.6/etc/init.d/S05netconfig
@@ -0,0 +1,87 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006 OpenWrt.org
+
+start() {
+	[ -e /etc/config/network ] && exit 0
+	
+	mkdir -p /etc/config
+	
+	(
+		if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
+			# WGT634u
+			echo boardtype=wgt634u
+		else
+			strings /dev/mtdblock/3
+		fi
+	) | awk '
+	function p(cfgname, name) {
+		if (c[name] != "") print "	option " cfgname "	\"" c[name] "\""
+	}
+	
+	BEGIN {
+		FS="="
+		c["lan_ifname"]="eth0.0 wl0"
+		c["wan_ifname"]="eth0.1"
+		c["vlan0ports"]="1 2 3 4 5*"
+		c["vlan1ports"]="0 5"
+	}
+	
+	($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") {
+		nvram[$1] = $2
+	}
+	
+	END {
+		# v1 hardware
+		if (nvram["boardtype"] == "bcm94710dev") {
+			# Asus WL-500g
+			if (nvram["boardnum"] == "asusX") {
+				c["lan_ifname"]="eth0 eth1 wl0" # FIXME
+				c["wan_ifname"]=""
+			}
+		}
+		if (nvram["boardtype"] == "wgt634u") {
+			c["vlan0ports"] = "0 1 2 3 5*"
+			c["vlan1ports"] = "4 5"
+			c["lan_ifname"] = "eth0.0 ath0"
+		}
+		if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) {
+			c["vlan0ports"] = "0 1 2 3 5*"
+			c["vlan1ports"] = "4 5"
+		}
+	
+		# WAP54G
+		if ((nvram["boardnum"] == "2") || \
+			(nvram["boardnum"] == "1024")) {
+			c["lan_ifname"]="eth0 wl0"
+			c["wan_ifname"]=""
+		}
+	
+		print "#### VLAN configuration "
+		print "config switch eth0"
+		p("vlan0", "vlan0ports")
+		p("vlan1", "vlan1ports")
+		print ""
+		print ""
+		print "#### Loopback configuration"
+		print "config interface loopback"
+		print "	option ifname	\"lo\""
+		print "	option proto	static"
+		print "	option ipaddr	127.0.0.1"
+		print "	option netmask	255.0.0.0"
+		print ""
+		print ""
+		print "#### LAN configuration"
+		print "config interface lan"
+		print "	option type 	bridge"
+		p("ifname", "lan_ifname")
+		print "	option proto	static"
+		print "	option ipaddr	192.168.1.1"
+		print "	option netmask	255.255.255.0"
+		print ""
+		print ""
+		print "#### WAN configuration"
+		print "config interface	wan"
+		p("ifname", "wan_ifname")
+		print "	option proto	dhcp"
+	}' > /etc/config/network
+}
diff --git a/package/base-files/brcm-2.6/etc/preinit b/package/base-files/brcm-2.6/etc/preinit
new file mode 100755
index 0000000000..fb13e107e5
--- /dev/null
+++ b/package/base-files/brcm-2.6/etc/preinit
@@ -0,0 +1,13 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+export PATH=/bin:/sbin:/usr/bin:/usr/sbin
+mount none /proc -t proc
+
+[ -f /etc/preinit.arch ] && . /etc/preinit.arch
+[ -z "$FAILSAFE" ] || {
+	echo /bin/true > /proc/sys/kernel/hotplug
+	telnetd -l /bin/login <> /dev/null 2>&1
+}
+mount_root ${FAILSAFE:+failsafe}
+exec /sbin/init
diff --git a/package/base-files/brcm-2.6/sbin/mount_root b/package/base-files/brcm-2.6/sbin/mount_root
new file mode 100755
index 0000000000..e3bdd3655c
--- /dev/null
+++ b/package/base-files/brcm-2.6/sbin/mount_root
@@ -0,0 +1,35 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+is_dirty() {
+	grep Broadcom /proc/cpuinfo >&- || return 1
+	OFFSET="$(($(hexdump -v /dev/mtdblock/1 -s 20 -n 2 -e '"%d"')-1))"
+	return $(hexdump -v /dev/mtdblock/1 -s $OFFSET -n 1 -e '"%d"')
+}
+
+size=$(awk '/Mem:/ {l=5242880;print((s=$2/2)<l)?$2-l:s}' /proc/meminfo)
+mount none /tmp -t tmpfs -o size=$size
+
+if [ "$1" != "failsafe" ]; then 
+	mtd unlock linux
+	mount | grep jffs2 >&-
+	if [ $? = 0 ] ; then
+		mount -o remount,rw /dev/root /
+	else
+		. /bin/firstboot
+		is_dirty 
+		[ $? != 0 ] && {
+			echo "switching to jffs2"
+			mount /dev/mtdblock/4 /jffs -t jffs2
+			pivot /jffs /rom
+		} || {
+			echo "jffs2 unusable; using ramdisk"
+			ramoverlay
+		}
+	fi
+fi
+
+mount none /tmp -t tmpfs -o remount,nosuid,nodev,mode=1777
+mkdir -p /dev/pts
+mount none /dev/pts -t devpts
+mount -t sysfs none /sys 2>&-
diff --git a/package/base-files/default/bin/ipcalc b/package/base-files/default/bin/ipcalc
new file mode 100755
index 0000000000..e8efa6b96c
--- /dev/null
+++ b/package/base-files/default/bin/ipcalc
@@ -0,0 +1,32 @@
+#!/bin/sh
+
+awk -f /usr/lib/common.awk -f - $* <<EOF
+BEGIN {
+	ipaddr=ip2int(ARGV[1])
+	netmask=ip2int(ARGV[2])
+	network=and(ipaddr,netmask)
+	broadcast=or(network,compl(netmask))
+	
+	start=or(network,and(ip2int(ARGV[3]),compl(netmask)))
+	limit=network+1
+	if (start<limit) start=limit
+	
+	end=start+ARGV[4]
+	limit=or(network,compl(netmask))-1
+	if (end>limit) end=limit
+
+	print "IP="int2ip(ipaddr)
+	print "NETMASK="int2ip(netmask)
+	print "BROADCAST="int2ip(broadcast)
+	print "NETWORK="int2ip(network)
+	print "PREFIX="32-bitcount(compl(netmask))
+	
+	# range calculations:
+	# ipcalc <ip> <netmask> <start> <num>
+	
+	if (ARGC > 3) {
+		print "START="int2ip(start)
+		print "END="int2ip(end-1)
+	}
+}
+EOF
diff --git a/package/base-files/default/bin/login b/package/base-files/default/bin/login
new file mode 100755
index 0000000000..ff5d3660e4
--- /dev/null
+++ b/package/base-files/default/bin/login
@@ -0,0 +1,18 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+grep '^root:[^!]' /etc/passwd >&- 2>&-
+[ "$?" = "0" -a -z "$FAILSAFE" ]  &&  
+{
+    echo "Login failed."
+    exit 0
+} || {
+cat << EOF
+ === IMPORTANT ============================
+  Use 'passwd' to set your login password
+  this will disable telnet and enable SSH
+ ------------------------------------------
+EOF
+}
+
+exec /bin/ash --login
diff --git a/package/base-files/default/bin/uci b/package/base-files/default/bin/uci
new file mode 100755
index 0000000000..7f43549471
--- /dev/null
+++ b/package/base-files/default/bin/uci
@@ -0,0 +1,159 @@
+#!/bin/sh
+# Shell script for interacting with config files
+#
+# Copyright (C) 2006 by Fokus Fraunhofer <carsten.tittel@fokus.fraumhofer.de>
+# Copyright (C) 2006 by Felix Fietkau <nbd@openwrt.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+. /etc/functions.sh
+include /lib/config
+
+do_get() {
+	[ $# -ne 3 ] && {
+		uci_usage get
+		exit 1
+	}
+	local PACKAGE="$1"
+	local CONFIG="$2"
+	local OPTION="$3"
+
+	uci_load "$PACAKGE"
+	config_get "$CONFIG" "$OPTION"
+}
+
+do_set() {
+	[ $# -ne 4 ] && {
+		uci_usage set
+		exit 1
+	}
+	uci_set "$@"
+}
+
+do_add() {
+	[ $# -ne 3 ] && {
+		uci_usage add
+		exit 1
+	}
+	uci_add "$@"
+}
+
+do_rename() {
+	[ $# -ne 3 ] && {
+		uci_usage rename
+		exit 1
+	}
+	uci_rename "$@"
+}
+
+do_remove() {
+	[ $# -ne 3 -a $# -ne 2 ] && {
+		uci_usage rename
+		exit 1
+	}
+	uci_remove "$@"
+}
+
+do_commit() {
+	[ $# -ne 1 ] && {
+		uci_usage commit
+		exit 1
+	}
+	uci_commit "$1"
+}
+
+do_show() {
+	[ $# -gt 2 -o $# -lt 1 ] && {
+		uci_usage show
+		exit 1
+	}
+	
+	PACKAGE="$1"
+	CONFIG="$2"
+	SECTION=""
+	
+	config_cb() {
+		if [ -z "$CONFIG" -o "$CONFIG" = "$2" ]; then
+			append SECTION "$2"
+			option_cb() {
+				append "${CONFIG_SECTION}_VARS" "$1"
+			}
+		else
+			option_cb() {
+				return 0
+			}
+		fi
+	}
+			
+	uci_load "$PACKAGE"
+	
+	for section in $SECTION; do
+		config_get type "$section" TYPE
+		[ -z "$type" ] && continue
+		echo "@$section=$type"
+		eval "VARS=\"\${${section}_VARS}\""
+		for var in $VARS; do
+			config_get val "$section" "$var"
+			[ -n "$val" ] && {
+				echo "${section}.${var}=${val}"
+				config_set "$section" "$var" ""
+			}
+		done
+		config_set "$section" TYPE ""
+	done
+}
+
+uci_usage() {
+	case "$1" in
+		show) echo "$0 show <package> [<config>]";;
+		get) echo "$0 get <package> <config> <option>";;
+		set) echo "$0 set <package> <config> <option> <value>";;
+		add) echo "$0 add <package> <type> <config>";;
+		del) echo "$0 del <package> <config> [<option>]";;
+		rename) echo "$0 rename <package> <config> <name>";;
+		commit) echo "$0 commit <package>";;
+		*) 
+			echo "Syntax: $0 <command> <arguments...>"
+			echo
+			uci_usage show
+			uci_usage get
+			uci_usage set
+			uci_usage add
+			uci_usage del
+			uci_usage rename
+			uci_usage commit
+			echo
+			exit 1
+		;;
+	esac
+}
+
+if [ $# -eq 0 ] ; then
+	uci_usage
+	exit 0
+fi
+CMD="$1"
+shift
+case "$CMD" in
+	set) do_set "$@";;
+	add) do_add "$@";;
+	del) do_remove "$@";;
+	rename) do_rename "$@";;
+	get) do_get "$@";;
+	show) do_show "$@";;
+	commit) do_commit "$@";;
+	*) uci_usage;;
+esac
+exit 0
diff --git a/package/base-files/default/etc/banner b/package/base-files/default/etc/banner
new file mode 100644
index 0000000000..c2fbc12680
--- /dev/null
+++ b/package/base-files/default/etc/banner
@@ -0,0 +1,10 @@
+  _______                     ________        __
+ |       |.-----.-----.-----.|  |  |  |.----.|  |_
+ |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
+ |_______||   __|_____|__|__||________||__|  |____|
+          |__| W I R E L E S S   F R E E D O M
+ KAMIKAZE (bleeding edge, $R) -------------------
+  * 10 oz Vodka       Shake well with ice and strain
+  * 10 oz Triple sec  mixture into 10 shot glasses.
+  * 10 oz lime juice  Salute!
+ ---------------------------------------------------
diff --git a/package/base-files/default/etc/config/network b/package/base-files/default/etc/config/network
new file mode 100644
index 0000000000..1d5ded3728
--- /dev/null
+++ b/package/base-files/default/etc/config/network
@@ -0,0 +1,13 @@
+# Copyright (C) 2006 OpenWrt.org
+
+config interface loopback
+	option ifname	lo
+	option proto	static
+	option ipaddr	127.0.0.1
+	option netmask	255.0.0.0
+
+config interface lan
+	option ifname	eth0
+	option proto	static
+	option ipaddr	192.168.1.1
+	option netmask	255.255.255.0
diff --git a/package/base-files/default/etc/functions.sh b/package/base-files/default/etc/functions.sh
new file mode 100755
index 0000000000..9c3057ed00
--- /dev/null
+++ b/package/base-files/default/etc/functions.sh
@@ -0,0 +1,119 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+# Copyright (C) 2006 Fokus Fraunhofer <carsten.tittel@fokus.fraunhofer.de>
+
+alias debug=${DEBUG:-:}
+
+# newline
+N="
+"
+
+_C=0
+
+# valid interface?
+if_valid () (
+  ifconfig "$1" >&- 2>&- ||
+  [ "${1%%[0-9]}" = "br" ] ||
+  { debug "# missing interface '$1' ignored"; false; }
+)
+
+hotplug_dev() {
+	env -i ACTION=$1 INTERFACE=$2 /sbin/hotplug net
+}
+
+append() {
+	local var="$1"
+	local value="$2"
+	local sep="${3:- }"
+	eval "export ${var}=\"\${${var}:+\${${var}}${value:+$sep}}\$value\""
+}
+
+reset_cb() {
+	config_cb() {
+		return 0
+	}
+	option_cb() {
+		return 0
+	}
+}
+reset_cb
+
+config () {
+    local cfgtype="$1"
+    local name="$2"
+    _C=$(($_C + 1))
+    name="${name:-cfg${_C}}"
+    config_cb "$cfgtype" "$name"
+    export CONFIG_SECTION="$name"
+    export CONFIG_${CONFIG_SECTION}_TYPE="$cfgtype"
+}
+
+option () {
+	local varname="$1"; shift
+	export CONFIG_${CONFIG_SECTION}_${varname}="$*"
+	option_cb "$varname" "$*"
+}
+
+config_rename() {
+	local OLD="$1"
+	local NEW="$2"
+	local oldsetting
+	local newvar
+	
+	[ -z "$OLD" -o -z "$NEW" ] && return
+	for oldsetting in `set | grep ^CONFIG_${OLD}_ | \
+		sed -e 's/\(.*\)=.*$/\1/'` ; do
+		newvar="CONFIG_${NEW}_${oldsetting##CONFIG_${OLD}_}"
+		eval "${newvar}=\${$oldsetting}"
+		unset "$oldsetting"
+	done
+	[ "$CONFIG_SECTION" = "$OLD" ] && CONFIG_SECTION="$NEW"
+}
+
+config_unset() {
+	config_set "$1" "$2" ""
+}
+
+config_clear() {
+	[ -z "$CONFIG_SECTION" ] && return
+	for oldsetting in `set | grep ^CONFIG_${CONFIG_SECTION}_ | \
+		sed -e 's/\(.*\)=.*$/\1/'` ; do 
+		unset $oldsetting 
+	done
+	unset CONFIG_SECTION
+}
+
+config_load() {
+	local DIR="./"
+	_C=0
+	[ \! -e "$1" -a -e "/etc/config/$1" ] && {
+		DIR="/etc/config/"
+	}
+	[ -e "$DIR$1" ] && {
+		CONFIG_FILENAME="$DIR$1"
+		. ${CONFIG_FILENAME}
+	} || return 1
+	${CD:+cd -} >/dev/null
+	${CONFIG_SECTION:+config_cb}
+}
+
+config_get() {
+	case "$3" in
+		"") eval "echo \"\${CONFIG_${1}_${2}}\"";;
+		*) eval "$1=\"\${CONFIG_${2}_${3}}\"";;
+	esac
+}
+
+config_set() {
+	export CONFIG_${1}_${2}="${3}"
+}
+
+load_modules() {
+	sed 's/^[^#]/insmod &/' $* | ash 2>&- || :
+}
+
+include() {
+	for file in $(ls $1/*.sh 2>/dev/null); do
+		. $file
+	done
+}
diff --git a/package/base-files/default/etc/group b/package/base-files/default/etc/group
new file mode 100644
index 0000000000..c4e77f316a
--- /dev/null
+++ b/package/base-files/default/etc/group
@@ -0,0 +1,2 @@
+root:x:0:
+nogroup:x:65534:
diff --git a/package/base-files/default/etc/hosts b/package/base-files/default/etc/hosts
new file mode 100644
index 0000000000..ce138ec1e6
--- /dev/null
+++ b/package/base-files/default/etc/hosts
@@ -0,0 +1 @@
+127.0.0.1 localhost OpenWrt
diff --git a/package/base-files/default/etc/hotplug.d/block/01-mount b/package/base-files/default/etc/hotplug.d/block/01-mount
new file mode 100755
index 0000000000..b6275e5a28
--- /dev/null
+++ b/package/base-files/default/etc/hotplug.d/block/01-mount
@@ -0,0 +1,26 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+DEV=${DEVPATH##*/}
+{
+echo "ACTION=$ACTION DEVPATH=$DEVPATH $0 $*"
+case "$ACTION" in
+add)
+	echo -ne "waiting for $DEV"
+	while [ ! -b /dev/$DEV ]; do {
+		echo -ne "."
+		sleep 1
+		time=$((time+1)); [ $time -gt 10 ] && break
+	}; done
+	
+	[ ${DEV%%[0-9]} != ${DEV} ] && {
+		mkdir -p /tmp/$DEV
+		mount /dev/$DEV /tmp/$DEV -t auto -o sync
+	}
+	;;
+remove)
+	umount /tmp/$DEV
+	rm -rf /dev/$DEV /tmp/$DEV
+	;;
+esac
+} 2>&1 | logger
diff --git a/package/base-files/default/etc/hotplug.d/net/10-net b/package/base-files/default/etc/hotplug.d/net/10-net
new file mode 100644
index 0000000000..4e5c3041b5
--- /dev/null
+++ b/package/base-files/default/etc/hotplug.d/net/10-net
@@ -0,0 +1,28 @@
+# Copyright (C) 2006 OpenWrt.org
+
+include /lib/network
+
+addif() {
+	scan_interfaces
+	setup_interface "$INTERFACE"
+
+	# find all vlan configurations for this interface and set them up as well
+	for ifc in $interfaces; do
+		config_get iftype "$ifc" type
+		config_get ifs "$ifc" device
+		for dev in $ifs; do
+			[ "${dev%%\.*}" = "$INTERFACE" -a "$dev" != "$INTERFACE" ] && {
+				add_vlan "$dev"
+			}
+		done
+	done
+}
+
+case "$ACTION" in
+	add|register)
+		case "$PHYSDEVDRIVER" in
+			natsemi) sleep 1;;
+		esac
+		addif
+	;;
+esac
diff --git a/package/base-files/default/etc/hotplug.d/usb/01-ln b/package/base-files/default/etc/hotplug.d/usb/01-ln
new file mode 100755
index 0000000000..f9eda02988
--- /dev/null
+++ b/package/base-files/default/etc/hotplug.d/usb/01-ln
@@ -0,0 +1,33 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+case "$ACTION" in
+add) 
+	[ -f /sys/${DEVPATH}/idVendor -a "$(cat /sys/${DEVPATH}/idVendor)" -ne "0000" ] && {
+		cd /sys/${DEVPATH}
+
+		NUM=${DEVPATH##*/}
+		HOST=$(find ${NUM}:*/host* -type d)
+		HOST=${HOST##*/host}
+
+		echo -ne "waiting for disk"
+
+		while [ ! -d "/dev/scsi/host${HOST}/bus0/target0/lun0" ]; do {
+			echo -ne "."
+			sleep 1;
+			time=$((time+1)); [ $time -gt 10 ] && break
+		}; done
+		echo
+		
+		cd  /sys/bus/scsi/devices/${HOST}\:0\:0\:0
+		for BLOCK in block:* ; do {
+			cd ${BLOCK}
+			BLOCK=${BLOCK##block\:}
+			ln -sf /dev/scsi/host${HOST}/bus0/target0/lun0/disc /dev/${BLOCK} 
+			for DEV in ${BLOCK}*; do {
+				ln -sf /dev/scsi/host${HOST}/bus0/target0/lun0/part${DEV##$BLOCK} /dev/$DEV
+			}; done
+		}; done
+	} 2>&1 | logger 
+	;;
+esac
diff --git a/package/base-files/default/etc/init.d/S10boot b/package/base-files/default/etc/init.d/S10boot
new file mode 100755
index 0000000000..77b5ca72d5
--- /dev/null
+++ b/package/base-files/default/etc/init.d/S10boot
@@ -0,0 +1,25 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006 OpenWrt.org
+
+start() {
+	[ -f /proc/mounts ] || /sbin/mount_root
+	[ -f /proc/jffs2_bbc ] && echo "S" > /proc/jffs2_bbc
+	vconfig set_name_type DEV_PLUS_VID_NO_PAD
+	
+	HOSTNAME=${wan_hostname%%.*}
+	echo ${HOSTNAME:=OpenWrt}>/proc/sys/kernel/hostname
+	
+	mkdir -p /var/run
+	mkdir -p /var/log
+	mkdir -p /var/lock
+	touch /var/log/wtmp
+	touch /var/log/lastlog
+	[ "$FAILSAFE" = "true" ] && touch /tmp/.failsafe
+	
+	# manually trigger hotplug before loading modules
+	for iface in $(awk -F: '/:/ {print $1}' /proc/net/dev); do
+		/usr/bin/env -i ACTION=add INTERFACE="$iface" /sbin/hotplug net
+	done
+	
+	load_modules /etc/modules /etc/modules.d/*
+}
diff --git a/package/base-files/default/etc/init.d/S40network b/package/base-files/default/etc/init.d/S40network
new file mode 100755
index 0000000000..be045045e7
--- /dev/null
+++ b/package/base-files/default/etc/init.d/S40network
@@ -0,0 +1,11 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006 OpenWrt.org
+
+start() {
+	setup_switch() { return 0; }
+
+	include /lib/network
+	setup_switch
+	/sbin/wifi
+}
+
diff --git a/package/base-files/default/etc/init.d/S50httpd b/package/base-files/default/etc/init.d/S50httpd
new file mode 100755
index 0000000000..a05b10c094
--- /dev/null
+++ b/package/base-files/default/etc/init.d/S50httpd
@@ -0,0 +1,10 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006 OpenWrt.org
+
+start() {
+	[ -d /www ] && httpd -p 80 -h /www -r OpenWrt
+}
+
+stop() {
+	killall httpd
+}
diff --git a/package/base-files/default/etc/init.d/S50telnet b/package/base-files/default/etc/init.d/S50telnet
new file mode 100755
index 0000000000..228eac2b62
--- /dev/null
+++ b/package/base-files/default/etc/init.d/S50telnet
@@ -0,0 +1,10 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006 OpenWrt.org
+
+start() {
+	if awk -F: '/^root:/ && $2 !~ /\!/ {exit 1}' /etc/passwd 2>/dev/null; then telnetd -l /bin/login; fi
+}
+
+stop() {
+	killall telnetd
+}
diff --git a/package/base-files/default/etc/init.d/S60cron b/package/base-files/default/etc/init.d/S60cron
new file mode 100755
index 0000000000..a450c36dd2
--- /dev/null
+++ b/package/base-files/default/etc/init.d/S60cron
@@ -0,0 +1,12 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006 OpenWrt.org
+
+start () {
+	mkdir -p /var/spool/cron
+	ln -s /etc/crontabs /var/spool/cron/crontabs
+	crond -c /etc/crontabs
+}
+
+stop() {
+	killall crond
+}
diff --git a/package/base-files/default/etc/init.d/rcS b/package/base-files/default/etc/init.d/rcS
new file mode 100755
index 0000000000..7fae7f5b05
--- /dev/null
+++ b/package/base-files/default/etc/init.d/rcS
@@ -0,0 +1,26 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+${FAILSAFE:+exit}
+
+# FIXME: add logging configuration
+#[ -f /etc/config/network ] && . /etc/config/network
+#eval $(ipcalc "$log_ipaddr")
+#[ "$log_ipaddr" = "$IP" ] || log_ipaddr=""
+syslogd -C 16 #${log_ipaddr:+-L -R $log_ipaddr}
+klogd
+
+(
+	for i in /etc/init.d/S*; do
+		$i start 2>&1
+	done 
+	
+	sysctl -p >&-
+
+	# automagically run firstboot
+	{ mount|grep "on / type tmpfs" 1>&-; } && {
+		lock /tmp/.switch2jffs
+		firstboot switch2jffs
+		lock -u /tmp/.switch2jffs
+	}
+) | logger -s -p 6 -t '' &
diff --git a/package/base-files/default/etc/inittab b/package/base-files/default/etc/inittab
new file mode 100644
index 0000000000..39e134cb16
--- /dev/null
+++ b/package/base-files/default/etc/inittab
@@ -0,0 +1,3 @@
+::sysinit:/etc/init.d/rcS
+tts/0::askfirst:/bin/ash --login
+#tts/1::askfirst:/bin/ash --login
diff --git a/package/base-files/default/etc/ipkg.conf b/package/base-files/default/etc/ipkg.conf
new file mode 100644
index 0000000000..2931d2cf80
--- /dev/null
+++ b/package/base-files/default/etc/ipkg.conf
@@ -0,0 +1,3 @@
+src snapshots http://openwrt.org/downloads/snapshots/$S/packages
+dest root /
+dest ram /tmp
diff --git a/package/base-files/default/etc/nvram.sh b/package/base-files/default/etc/nvram.sh
new file mode 100644
index 0000000000..ddbd88b52f
--- /dev/null
+++ b/package/base-files/default/etc/nvram.sh
@@ -0,0 +1,19 @@
+#!/bin/ash
+# Copyright (C) 2006 OpenWrt.org
+
+
+# allow env to override nvram
+nvram () {
+  if [ -x /usr/sbin/nvram ]; then
+    case $1 in
+      get) eval "echo \${$2:-\$(/usr/sbin/nvram get $2)}";;
+      *) /usr/sbin/nvram $*;;
+    esac
+  else
+    case $1 in
+      get) eval "echo \${$2:-\${DEFAULT_$2}}";;
+      *);;
+    esac
+  fi  
+}
+
diff --git a/package/base-files/default/etc/passwd b/package/base-files/default/etc/passwd
new file mode 100644
index 0000000000..3b660a0d4e
--- /dev/null
+++ b/package/base-files/default/etc/passwd
@@ -0,0 +1,2 @@
+root:!:0:0:root:/tmp:/bin/ash
+nobody:*:65534:65534:nobody:/var:/bin/false
diff --git a/package/base-files/default/etc/profile b/package/base-files/default/etc/profile
new file mode 100644
index 0000000000..ae514b0924
--- /dev/null
+++ b/package/base-files/default/etc/profile
@@ -0,0 +1,12 @@
+#!/bin/sh
+[ -f /etc/banner ] && cat /etc/banner
+
+export PATH=/bin:/sbin:/usr/bin:/usr/sbin
+export PS1='\u@\h:\w\$ '
+
+alias more=less
+[ -x /usr/bin/vim ] || alias vim=vi
+
+arp() { cat /proc/net/arp; }
+ldd() { LD_TRACE_LOADED_OBJECTS=1 $*; }
+reboot() { ifdown wan 2>&1 >/dev/null ; /sbin/reboot; }
diff --git a/package/base-files/default/etc/protocols b/package/base-files/default/etc/protocols
new file mode 100644
index 0000000000..53fecb6d3c
--- /dev/null
+++ b/package/base-files/default/etc/protocols
@@ -0,0 +1,56 @@
+# Internet (IP) protocols
+#
+# Updated from http://www.iana.org/assignments/protocol-numbers and other
+# sources.
+# New protocols will be added on request if they have been officially
+# assigned by IANA and are not historical.
+# If you need a huge list of used numbers please install the nmap package.
+
+ip	0	IP		# internet protocol, pseudo protocol number
+#hopopt	0	HOPOPT		# IPv6 Hop-by-Hop Option [RFC1883]
+icmp	1	ICMP		# internet control message protocol
+igmp	2	IGMP		# Internet Group Management
+ggp	3	GGP		# gateway-gateway protocol
+ipencap	4	IP-ENCAP	# IP encapsulated in IP (officially ``IP'')
+st	5	ST		# ST datagram mode
+tcp	6	TCP		# transmission control protocol
+egp	8	EGP		# exterior gateway protocol
+igp	9	IGP		# any private interior gateway (Cisco)
+pup	12	PUP		# PARC universal packet protocol
+udp	17	UDP		# user datagram protocol
+hmp	20	HMP		# host monitoring protocol
+xns-idp	22	XNS-IDP		# Xerox NS IDP
+rdp	27	RDP		# "reliable datagram" protocol
+iso-tp4	29	ISO-TP4		# ISO Transport Protocol class 4 [RFC905]
+xtp	36	XTP		# Xpress Transfer Protocol
+ddp	37	DDP		# Datagram Delivery Protocol
+idpr-cmtp 38	IDPR-CMTP	# IDPR Control Message Transport
+ipv6	41	IPv6		# Internet Protocol, version 6
+ipv6-route 43	IPv6-Route	# Routing Header for IPv6
+ipv6-frag 44	IPv6-Frag	# Fragment Header for IPv6
+idrp	45	IDRP		# Inter-Domain Routing Protocol
+rsvp	46	RSVP		# Reservation Protocol
+gre	47	GRE		# General Routing Encapsulation
+esp	50	IPSEC-ESP	# Encap Security Payload [RFC2046]
+ah	51	IPSEC-AH	# Authentication Header [RFC2402]
+skip	57	SKIP		# SKIP
+ipv6-icmp 58	IPv6-ICMP	# ICMP for IPv6
+ipv6-nonxt 59	IPv6-NoNxt	# No Next Header for IPv6
+ipv6-opts 60	IPv6-Opts	# Destination Options for IPv6
+rspf	73	RSPF CPHB	# Radio Shortest Path First (officially CPHB)
+vmtp	81	VMTP		# Versatile Message Transport
+eigrp	88	EIGRP		# Enhanced Interior Routing Protocol (Cisco)
+ospf	89	OSPFIGP		# Open Shortest Path First IGP
+ax.25	93	AX.25		# AX.25 frames
+ipip	94	IPIP		# IP-within-IP Encapsulation Protocol
+etherip	97	ETHERIP		# Ethernet-within-IP Encapsulation [RFC3378]
+encap	98	ENCAP		# Yet Another IP encapsulation [RFC1241]
+#	99			# any private encryption scheme
+pim	103	PIM		# Protocol Independent Multicast
+ipcomp	108	IPCOMP		# IP Payload Compression Protocol
+vrrp	112	VRRP		# Virtual Router Redundancy Protocol
+l2tp	115	L2TP		# Layer Two Tunneling Protocol [RFC2661]
+isis	124	ISIS		# IS-IS over IPv4
+sctp	132	SCTP		# Stream Control Transmission Protocol
+fc	133	FC		# Fibre Channel
+
diff --git a/package/base-files/default/etc/rc.common b/package/base-files/default/etc/rc.common
new file mode 100755
index 0000000000..20d1efa402
--- /dev/null
+++ b/package/base-files/default/etc/rc.common
@@ -0,0 +1,73 @@
+#!/bin/sh
+. /etc/functions.sh
+
+start() {
+	return 0
+}
+
+stop() {
+	return 0
+}
+
+reload() {
+	return 1
+}
+
+restart() {
+	stop
+	start
+}
+
+boot() {
+	start
+}
+
+shutdown() {
+	return 0
+}
+
+disable() {
+	rm -f /etc/rc.d/${initscript##*/}
+}
+
+enable() {
+	disable
+	ln -s /etc/init.d/${initscript##*/} /etc/rc.d/${initscript##*/}
+}
+
+depends() {
+	return 0
+}
+
+help() {
+	cat <<EOF
+Syntax: $initscript [command]
+
+Available commands:
+	start	Start the service
+	stop	Stop the service
+	restart	Restart the service
+	reload	Reload configuration files (or restart if that fails)
+$EXTRA_HELP
+EOF
+}
+
+initscript="$1"
+action="$2"
+
+. "$initscript"
+
+cmds=
+for cmd in $EXTRA_COMMANDS; do
+	cmds="$cmd) $cmd;;"
+done
+eval "case \"\$action\" in
+	start) start;;
+	stop) stop;;
+	reload) reload || restart;;
+	restart) restart;;
+	boot) boot;;
+	shutdown) shutdown;;
+	$cmds
+	*) help;;
+esac"
diff --git a/package/base-files/default/etc/resolv.conf b/package/base-files/default/etc/resolv.conf
new file mode 100644
index 0000000000..9617eacda7
--- /dev/null
+++ b/package/base-files/default/etc/resolv.conf
@@ -0,0 +1,2 @@
+nameserver 127.0.0.1
+search lan
diff --git a/package/base-files/default/etc/shells b/package/base-files/default/etc/shells
new file mode 100644
index 0000000000..006aa38ced
--- /dev/null
+++ b/package/base-files/default/etc/shells
@@ -0,0 +1 @@
+/bin/ash
diff --git a/package/base-files/default/etc/sysctl.conf b/package/base-files/default/etc/sysctl.conf
new file mode 100644
index 0000000000..e60038cf35
--- /dev/null
+++ b/package/base-files/default/etc/sysctl.conf
@@ -0,0 +1,12 @@
+kernel.panic=3
+net.ipv4.conf.default.arp_ignore=1
+net.ipv4.conf.all.arp_ignore=1
+net.ipv4.ip_forward=1
+net.ipv4.icmp_echo_ignore_broadcasts=1
+net.ipv4.icmp_ignore_bogus_error_responses=1
+net.ipv4.tcp_fin_timeout=30
+net.ipv4.tcp_keepalive_time=120
+net.ipv4.tcp_syncookies=1
+net.ipv4.tcp_timestamps=0
+net.ipv4.ip_conntrack_tcp_timeouts="300 43200 120 60 120 120 10 60 30 120"
+net.ipv4.ip_conntrack_udp_timeouts="60 180"
diff --git a/package/base-files/default/lib/config/uci-update.awk b/package/base-files/default/lib/config/uci-update.awk
new file mode 100644
index 0000000000..efa8758507
--- /dev/null
+++ b/package/base-files/default/lib/config/uci-update.awk
@@ -0,0 +1,160 @@
+# Configuration update functions
+#
+# Copyright (C) 2006 by Fokus Fraunhofer <carsten.tittel@fokus.fraunhofer.de>
+# Copyright (C) 2006 by Felix Fietkau <nbd@openwrt.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+
+function read_file(filename,  result) {
+	while ((getline <filename) == 1) {
+		result = result $0 "\n"
+	}
+	gsub(/\n*$/, "", result)
+	return result
+}
+
+function cmd2option(str,  tmp) {
+	if (match(str,"=")!=0) {
+		res = "\toption " substr(str,1,RSTART-1) "\t'" substr(str,RSTART+1) "'"
+	} else {
+		res= ""
+	}
+	return res
+}
+
+function cmd2config(atype,  aname) {
+	return "config \"" atype "\" \"" aname "\""
+}
+
+function update_config(cfg, update,  \
+  lines, line, l, n, i, i2, section, scnt, remove, tmp, aidx, rest) {
+	scnt = 1
+	linecnt=split(cfg "\n", lines, "\n")
+
+	cfg = ""
+	for (n = 1; n < linecnt; n++) {
+		# stupid parser for quoted arguments (e.g. for the type string).
+		# not to be used to gather variable values (backslash escaping doesn't work)
+		line = lines[n]
+		gsub(/^[ \t]*/, "", line)
+		gsub(/#.*$/, "", line)
+		i2 = 1
+		delete l
+		rest = line
+        	while (length(rest)) {
+			if (match(rest, /[ \t\"]+/)) {
+				if (RSTART>1) {
+					l[i2] = substr(rest,1,RSTART-1)
+					i2++
+				}
+				aidx=index(rest,"\"")
+				if (aidx>=RSTART && aidx<=RSTART+RLENGTH) {
+					rest=substr(rest,aidx+1)
+					# find the end of the string
+					match(rest,/\"/)
+					l[i2]=substr(rest,1,RSTART-1)
+					i2++
+				}
+				rest=substr(rest,RSTART+RLENGTH)
+			} else {
+				l[i2] = rest
+				i2++
+				rest = ""
+			}
+		}
+		line = lines[n]
+		
+		# when a command wants to set a config value for the current
+		# section and a blank line is encountered before an option with
+		# the same name, insert it here to maintain some coherency between
+		# manually and automatically created option lines
+		# if an option with the same name appears after this point, simply
+		# ignore it, because it is already set.
+		if ((section != "") && (l[1] != "option")) {
+			if (line ~ /^[ \t]*$/) {
+				if (update ~ "^" section "\\.") {
+					gsub("^" section ".", "", update)
+					cfg = cfg cmd2option(update) "\n"
+					gsub(/=.*$/, "", update)
+					update = "-" section "." update
+				}
+			}
+		}
+
+		if (l[1] == "config") {
+			# look for all unset values
+			if (section != "") {
+				flag=0
+				if (update ~ "^" section "\\.") {
+					flag=1
+					gsub("^" section ".", "", update)
+					cfg = cfg cmd2option(update) "\n"
+					
+					update = "-" section "." update
+				} 
+				if (flag!=0) cfg = cfg "\n"
+			}
+			
+			remove = ""
+			section = l[3]
+			if (!length(section)) {
+				section = "cfg" scnt
+			}	
+			scnt++
+			if (update == "-" section) {
+				remove = "section"
+				update = ""
+			} else if (update ~ "^@" section "=") {
+				update = ""
+			} else if (update ~ "^&" section "=") {
+				gsub("^&" section "=", "", update)
+				line = cmd2config(l[2],update) 
+				update = ""
+			}
+		}
+		if (remove == "option") remove = ""
+		if (l[1] == "option") {
+			if (update ~ "^-" section "\\." l[2] "$") remove = "option"
+			# if a supplied config value already exists, replace the whole line
+			if (match(update, "^" section "." l[2] "=")) {
+				gsub("^" section ".", "", update)
+				line = cmd2option(update)
+				update = ""
+			}
+		}
+		if (remove == "") cfg = cfg line "\n"
+	}
+	
+	# any new options for the last section??
+	if (section != "") {
+		if (update ~ "^" section "\\.") {
+			gsub("^" section ".", "", update)
+			cfg = cfg cmd2option(update) "\n"
+
+			update = "-" section "." update
+		} 
+	}
+
+	if (update ~ "^@") {
+		# new section
+		section = stype = substr(update,2)
+		gsub(/=.*$/,"",section)
+		gsub(/^.*=/,"",stype)
+		cfg = cfg "\nconfig \"" stype "\" \"" section "\"\n"
+	}
+
+	return cfg
+}
diff --git a/package/base-files/default/lib/config/uci.sh b/package/base-files/default/lib/config/uci.sh
new file mode 100755
index 0000000000..ccd6ee57ba
--- /dev/null
+++ b/package/base-files/default/lib/config/uci.sh
@@ -0,0 +1,138 @@
+#!/bin/sh
+# Shell script defining macros for manipulating config files
+#
+# Copyright (C) 2006 by Fokus Fraunhofer <carsten.tittel@fokus.fraumhofer.de>
+# Copyright (C) 2006 by Felix Fietkau <nbd@openwrt.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+uci_load() {
+	config_load "$PACKAGE"
+	local PACKAGE_BASE="$(basename "$PACKAGE")"
+	[ -f "/tmp/.uci/${PACKAGE_BASE}" ] && {
+		. "/tmp/.uci/${PACKAGE_BASE}"
+		config_cb
+	}
+}
+
+uci_do_update() {
+	local FILENAME="$1"
+	local UPDATE="$2"
+	awk -f /lib/config/uci-update.awk -f - <<EOF
+BEGIN {
+	config = read_file("$FILENAME")
+	$UPDATE
+	print config
+}
+EOF
+}
+
+uci_add_update() {
+	local PACKAGE="$1"
+	local UPDATE="$2"
+	local PACKAGE_BASE="$(basename "$PACKAGE")"
+	
+	# FIXME: add locking?
+	mkdir -p "/tmp/.uci"
+	echo "$UPDATE" >> "/tmp/.uci/${PACKAGE_BASE}"
+}
+
+uci_set() {
+	local PACKAGE="$1"
+	local CONFIG="$2"
+	local OPTION="$3"
+	local VALUE="$4"
+
+	( # spawn a subshell so you don't mess up the current environment
+		uci_load "$PACKAGE"
+		config_get type "$CONFIG" TYPE
+		[ -z "$type" ]
+	) || uci_add_update "$PACKAGE" "CONFIG_SECTION='$CONFIG'${N}option '$OPTION' '$VALUE'"
+}
+
+uci_add() {
+	local PACKAGE="$1"
+	local TYPE="$2"
+	local CONFIG="$3"
+
+	uci_add_update "$PACKAGE" "config '$TYPE' '$CONFIG'"
+}
+
+uci_rename() {
+	local PACKAGE="$1"
+	local CONFIG="$2"
+	local VALUE="$3"
+
+	uci_add_update "$PACKAGE" "config_rename '$CONFIG' '$VALUE'"
+}
+
+uci_remove() {
+	local PACKAGE="$1"
+	local CONFIG="$2"
+	local OPTION="$3"
+
+	if [ -z "$OPTION" ]; then
+		uci_add_update "$PACKAGE" "config_clear '$CONFIG'"
+	else
+		uci_add_update "$PACKAGE" "config_unset '$CONFIG' '$OPTION'"
+	fi
+}
+
+uci_commit() {
+	local PACKAGE="$1"
+	local PACKAGE_BASE="$(basename "$PACKAGE")"
+	
+	mkdir -p /tmp/.uci
+	lock "/tmp/.uci/$PACKAGE_BASE.lock"
+	[ -f "/tmp/.uci/$PACKAGE_BASE" ] && (
+		updatestr=""
+		
+		# replace handlers
+		config() {
+			append updatestr "config = update_config(config, \"@$2=$1\")" "$N"
+		}
+		option() {
+			append updatestr "config = update_config(config, \"$CONFIG_SECTION.$1=$2\")" "$N"
+		}
+		config_rename() {
+			append updatestr "config = update_config(config, \"&$1=$2\")" "$N"
+		}
+		config_unset() {
+			append updatestr "config = update_config(config, \"-$1.$2\")" "$N"
+		}
+		config_clear() {
+			append updatestr "config = update_config(config, \"-$1\")" "$N"
+		}
+		
+		. "/tmp/.uci/$PACKAGE_BASE"
+
+		# completely disable handlers so that they don't get in the way
+		config() {
+			return 0
+		}
+		option() {
+			return 0
+		}
+		
+		config_load "$PACKAGE" || CONFIG_FILENAME="$ROOT/etc/config/$PACKAGE_BASE"
+		uci_do_update "$CONFIG_FILENAME" "$updatestr" > "/tmp/.uci/$PACKAGE_BASE.new" && {
+			mv -f "/tmp/.uci/$PACKAGE_BASE.new" "$CONFIG_FILENAME" && \
+			rm -f "/tmp/.uci/$PACKAGE_BASE"
+		} 
+	)
+	lock -u "/tmp/.uci/$PACKAGE_BASE.lock"
+}
+
+
diff --git a/package/base-files/default/lib/network/config.sh b/package/base-files/default/lib/network/config.sh
new file mode 100755
index 0000000000..18f794a31b
--- /dev/null
+++ b/package/base-files/default/lib/network/config.sh
@@ -0,0 +1,143 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+# DEBUG="echo"
+
+find_config() {
+	local iftype device iface ifaces ifn
+	for ifn in $interfaces; do
+		config_get iftype "$ifn" type
+		config_get iface "$ifn" ifname
+		case "$iftype" in
+			bridge) config_get ifaces "$ifn" ifnames;;
+		esac
+		config_get device "$ifn" device
+		for ifc in $device $iface $ifaces; do
+			[ "$ifc" = "$1" ] && {
+				echo "$ifn"
+				return 0
+			}
+		done
+	done
+
+	return 1;
+}
+
+scan_interfaces() {
+	local mode iftype iface ifname device
+	interfaces=
+	config_cb() {
+		config_get iftype "$CONFIG_SECTION" TYPE
+		case "$iftype" in
+			interface)
+				config_get proto "$CONFIG_SECTION" proto
+				append interfaces "$CONFIG_SECTION"
+				config_get iftype "$CONFIG_SECTION" type
+				config_get ifname "$CONFIG_SECTION" ifname
+				config_set "$CONFIG_SECTION" device "$ifname"
+				case "$iftype" in
+					bridge)
+						config_set "$CONFIG_SECTION" ifnames "$ifname"
+						config_set "$CONFIG_SECTION" ifname br-"$CONFIG_SECTION"
+					;;
+				esac
+				( type "scan_$proto" ) >/dev/null 2>/dev/null && eval "scan_$proto '$CONFIG_SECTION'"
+			;;
+		esac
+	}
+	config_load network
+}
+
+add_vlan() {
+	local vif="${1%\.*}"
+	
+	[ "$1" = "$vif" ] || ifconfig "$1" >/dev/null 2>/dev/null || {
+		ifconfig "$vif" up 2>/dev/null >/dev/null || add_vlan "$vif"
+		$DEBUG vconfig add "$vif" "${1##*\.}"
+	}
+}
+
+setup_interface() {
+	local iface="$1"
+	local config="$2"
+	local proto
+
+	[ -n "$config" ] || {
+		config=$(find_config "$iface")
+		[ "$?" = 0 ] || return 1
+	}
+
+	proto="${3:-$(config_get "$config" proto)}"
+	config_get iftype "$config" type
+	
+	# Setup VLAN interfaces
+	add_vlan "$iface"
+
+	# Setup bridging
+	case "$iftype" in
+		bridge)
+			ifconfig "$iface" up 2>/dev/null >/dev/null
+			ifconfig "br-$config" 2>/dev/null >/dev/null && {
+				$DEBUG brctl addif "br-$config" "$iface"
+				return 0
+			} || {
+				$DEBUG brctl addbr "br-$config"
+				$DEBUG brctl setfd "br-$config" 0
+				$DEBUG brctl addif "br-$config" "$iface"
+				iface="br-$config"
+			}
+		;;
+	esac
+	
+	# Interface settings
+	config_get mtu "$config" mtu
+	$DEBUG ifconfig "$iface" ${mtu:+mtu $mtu} up
+
+	pidfile="/var/run/$iface.pid"
+	case "$proto" in
+		static)
+			config_get ipaddr "$config" ipaddr
+			config_get netmask "$config" netmask
+			[ -z "$ipaddr" -o -z "$netmask" ] && return 1
+			
+			config_get ip6addr "$config" ip6addr
+			config_get gateway "$config" gateway
+			config_get dns "$config" dns
+			
+			$DEBUG ifconfig "$iface" "$ipaddr" netmask "$netmask"
+			[ -z "$gateway" ] || route add default gw "$gateway"
+			[ -z "$dns" -o -f /tmp/resolv.conf ] || {
+				for ns in $dns; do
+					echo "nameserver $ns" >> /tmp/resolv.conf
+				done
+			}
+
+			env -i ACTION="ifup" INTERFACE="config" DEVICE="$iface" PROTO=static /sbin/hotplug "iface" &
+		;;
+		dhcp)
+			pid="$(cat "$pidfile" 2>/dev/null)"
+			[ -n "$pid" -a -d "/proc/$pid" ] && kill -9 "$pid"
+
+			config_get ipaddr "$config" ipaddr
+			config_get netmask "$config" netmask
+			config_get hostname "$config" hostname
+			config_get proto1 "$config" proto
+
+			[ -z "$ipaddr" ] || \
+				$DEBUG ifconfig "$iface" "$ipaddr" ${netmask:+netmask "$netmask"}
+
+			# don't stay running in background if dhcp is not the main proto on the interface (e.g. when using pptp)
+			[ "$proto1" != "$proto" ] && dhcpopts="-n -q"
+			$DEBUG udhcpc -i "$iface" ${ipaddr:+-r $ipaddr} ${hostname:+-H $hostname} -b -p "$pidfile" ${dhcpopts:- -R &}
+		;;
+		*)
+			if ( eval "type setup_interface_$proto" ) >/dev/null 2>/dev/null; then
+				eval "setup_interface_$proto '$iface' '$config' '$proto'" 
+			else
+				echo "Interface type $proto not supported."
+				return 1
+			fi
+		;;
+	esac
+}
+
diff --git a/package/base-files/default/rom/note b/package/base-files/default/rom/note
new file mode 100644
index 0000000000..1746eb0509
--- /dev/null
+++ b/package/base-files/default/rom/note
@@ -0,0 +1,3 @@
+SQUASHFS USERS:
+After firstboot has been run, / will be jffs2 and /rom will be squashfs
+(* except when in failsafe)
diff --git a/package/base-files/default/sbin/hotplug b/package/base-files/default/sbin/hotplug
new file mode 100755
index 0000000000..b1b6f97b23
--- /dev/null
+++ b/package/base-files/default/sbin/hotplug
@@ -0,0 +1,26 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+# bypass the normal hotplug path for firmware loading
+# would otherwise cause problems with drivers like bcm43xx
+[ "$1" = "firmware" -a "$ACTION" = "add" ] && {
+	[ -f "/lib/firmware/$FIRMWARE" ] && {
+		echo 1 > "/sys$DEVPATH/loading"
+		cp "/lib/firmware/$FIRMWARE" "/sys$DEVPATH/data"
+		echo 0 > "/sys$DEVPATH/loading"
+	}
+	exit 0
+}
+
+. /etc/functions.sh
+
+PATH=/bin:/sbin:/usr/bin:/usr/sbin
+LOGNAME=root
+USER=root
+export PATH LOGNAME USER
+
+[ \! -z "$1" -a -d /etc/hotplug.d/$1 ] && {
+	for script in $(ls /etc/hotplug.d/$1/* 2>&-); do (
+		[ -f $script ] && . $script
+	); done
+}
diff --git a/package/base-files/default/sbin/ifdown b/package/base-files/default/sbin/ifdown
new file mode 100755
index 0000000000..073e80d2da
--- /dev/null
+++ b/package/base-files/default/sbin/ifdown
@@ -0,0 +1,34 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+[ $# = 0 ] && { echo "  $0 <group>"; exit; }
+. /etc/functions.sh
+include /lib/network
+scan_interfaces
+
+cfg=$1
+debug "### ifdown $cfg ###"
+
+config_get proto "$cfg" proto
+[ -z "$proto" ] && { echo "interface not found."; exit; }
+
+# kill active ppp daemon
+pid="$(cat /var/run/ppp-${cfg}.pid 2>/dev/null)"
+[ -n "$pid" -a -d "/proc/$pid" ] && {
+	kill $pid
+	sleep 1
+	[ -d "/proc/$pid" ] && kill -9 $pid
+}
+
+# kill any other process associated with the interface
+config_get ifname "$cfg" ifname
+pid="$(cat /var/run/${ifname}.pid 2>/dev/null)"
+[ -n "$pid" -a -d "/proc/$pid" ] && kill -9 $pid
+
+config_get ifname "$cfg" ifname
+ifconfig "$ifname" >/dev/null 2>/dev/null && {
+	ifconfig "$ifname" 0.0.0.0 down
+
+	config_get iftype "$cfg" type
+	[ "$iftype" = "bridge" ] && brctl delbr "$ifname"
+}
diff --git a/package/base-files/default/sbin/ifup b/package/base-files/default/sbin/ifup
new file mode 100755
index 0000000000..c7055d4807
--- /dev/null
+++ b/package/base-files/default/sbin/ifup
@@ -0,0 +1,14 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+. /sbin/ifdown "$@"
+
+config_get iftype "$1" type
+case "$iftype" in
+	bridge) config_get ifname "$1" ifnames;;
+	*) config_get ifname "$1" ifname;;
+esac
+
+for dev in $ifname; do
+	setup_interface "$dev" "$1"
+done
diff --git a/package/base-files/default/sbin/mount_root b/package/base-files/default/sbin/mount_root
new file mode 100755
index 0000000000..81660f0067
--- /dev/null
+++ b/package/base-files/default/sbin/mount_root
@@ -0,0 +1,10 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+mount none /proc -t proc
+size=$(awk '/Mem:/ {l=5242880;print((s=$2/2)<l)?$2-l:s}' /proc/meminfo)
+mount none /tmp -t tmpfs -o size=$size,nosuid,nodev,mode=1777
+mkdir -p /dev/pts
+mount none /dev/pts -t devpts
+mount -t sysfs none /sys 2>&-
+mount -o remount,rw /dev/root /
diff --git a/package/base-files/default/sbin/wifi b/package/base-files/default/sbin/wifi
new file mode 100755
index 0000000000..4a3ec8cfef
--- /dev/null
+++ b/package/base-files/default/sbin/wifi
@@ -0,0 +1,44 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+. /etc/functions.sh
+
+config_get_bool() {
+	local _tmp
+	config_get "$1" "$2" "$3"
+	eval "_tmp=\$$1"
+	case "$_tmp" in
+		1|on|enabled) eval "$1=1";;
+		0|off|disabled) eval "$1=0";;
+		*) eval "$1=${4:-0}";;
+	esac
+}
+
+config_cb() {
+	config_get TYPE "$CONFIG_SECTION" TYPE
+	case "$TYPE" in
+		wifi-device)
+			append DEVICES "$CONFIG_SECTION"
+		;;
+		wifi-iface)
+			config_get device "$CONFIG_SECTION" device
+			config_get vifs "$device" vifs 
+			append vifs "$CONFIG_SECTION"
+			config_set "$device" vifs "$vifs"
+		;;
+	esac
+}
+
+config_load wireless
+include /lib/wifi
+
+for device in $DEVICES; do (
+	config_get iftype "$device" type
+	eval "type setup_$iftype" 2>/dev/null >/dev/null && {
+		eval "scan_$iftype '$device'"
+		eval "setup_$iftype '$device'" && {
+			# TODO: set up network settings
+			/bin/true
+		} || echo "$device($iftype): Setup failed" || true
+	} || echo "$device($iftype): Interface type not supported"
+); done
diff --git a/package/base-files/default/usr/lib/common.awk b/package/base-files/default/usr/lib/common.awk
new file mode 100644
index 0000000000..c5ce680fa6
--- /dev/null
+++ b/package/base-files/default/usr/lib/common.awk
@@ -0,0 +1,68 @@
+# Copyright (C) 2006 OpenWrt.org
+
+function portstr(type, str) {
+	gsub(/-/, ":", str)
+	if (insmod_mport != 1) {
+		print "insmod ipt_multiport >&- 2>&-"
+		insmod_mport = 1
+	}
+	if (type == "src") return " -m multiport --sports " str
+	else return " -m multiport --dports " str
+}
+
+function str2ipt(str) {
+	str2data(str)
+	_cmd = ""
+	if (_l["src"] != "") _cmd = _cmd " -s " _l["src"]
+	if (_l["dest"] != "") _cmd = _cmd " -d " _l["dest"]
+	if (_l["proto"] != "") {
+		_cmd = _cmd " -p " _l["proto"]
+	}
+	# scripts need to check for proto="" and emit two rules in that case
+	if ((_l["proto"] == "") || (_l["proto"] == "tcp") || (_l["proto"] == "udp")) {
+		if (_l["sport"] != "") _cmd = _cmd portstr("src", _l["sport"])
+		if (_l["dport"] != "") _cmd = _cmd portstr("dest", _l["dport"])
+	}
+	if (_l["layer7"] != "") {
+		if (insmod_l7 != 1) {
+			print "insmod ipt_layer7 >&- 2>&-"
+			insmod_l7 = 1
+		}
+		_cmd = _cmd " -m layer7 --l7proto " _l["layer7"]
+	}
+	return _cmd
+}
+
+function str2data(str) {
+	delete _l
+	_n = split(str, _o, "[\t ]")
+	for (_i = 1; _i <= _n; _i++) {
+		_n2 = split(_o[_i], _c, "=")
+		if (_n2 == 2) _l[_c[1]] = _c[2]
+	}
+}
+
+function bitcount(c) {
+	c=and(rshift(c, 1),0x55555555)+and(c,0x55555555)
+	c=and(rshift(c, 2),0x33333333)+and(c,0x33333333)
+	c=and(rshift(c, 4),0x0f0f0f0f)+and(c,0x0f0f0f0f)
+	c=and(rshift(c, 8),0x00ff00ff)+and(c,0x00ff00ff)
+	c=and(rshift(c,16),0x0000ffff)+and(c,0x0000ffff)
+	return c
+}
+
+function validate_netmask(nm) {
+	return and(-nm,compl(nm))
+}
+
+function ip2int(ip) {
+	for (ret=0,n=split(ip,a,"\."),x=1;x<=n;x++) ret=or(lshift(ret,8),a[x]) 
+	return ret
+}
+
+function int2ip(ip,ret,x) {
+	ret=and(ip,255)
+	ip=rshift(ip,8)
+	for(;x<3;ret=and(ip,255)"."ret,ip=rshift(ip,8),x++);
+	return ret
+}
diff --git a/package/base-files/default/usr/lib/parse-config.awk b/package/base-files/default/usr/lib/parse-config.awk
new file mode 100644
index 0000000000..9ce32b74ff
--- /dev/null
+++ b/package/base-files/default/usr/lib/parse-config.awk
@@ -0,0 +1,42 @@
+# Copyright (C) 2006 OpenWrt.org
+
+{
+	line=$0
+	gsub(/^[ \t]*/, "")
+	gsub(/[ \t]*$/, "")
+}
+
+$1 == "@define" {
+	v[$2] = $3
+}
+
+$1 == "@ifdef" {
+	if_open = 1
+	if (v[$2] != "") noprint = 0
+	else noprint = 1
+}
+
+$1 == "@ifndef" {
+	if_open = 1
+	if (v[$2] != "") noprint = 1
+	else noprint = 0
+}
+
+$1 == "@else" {
+	if (noprint == 1) noprint = 0
+	else noprint = 1
+}
+
+($1 !~ /^@[a-zA-Z]/) && (noprint != 1) {
+	n=split(line "@@", a, /@@/)
+	for (i=1; i<=n; i++) {
+		if ((i % 2) == 1) printf a[i]
+		else printf v[a[i]]
+	}
+	print ""
+}
+
+$1 == "@endif" {
+	if_open = 0
+	noprint = 0
+}
diff --git a/package/base-files/default/usr/share/udhcpc/default.script b/package/base-files/default/usr/share/udhcpc/default.script
new file mode 100755
index 0000000000..74e703715b
--- /dev/null
+++ b/package/base-files/default/usr/share/udhcpc/default.script
@@ -0,0 +1,57 @@
+#!/bin/sh
+[ -z "$1" ] && echo "Error: should be run by udhcpc" && exit 1
+. /etc/functions.sh
+include /lib/network
+
+RESOLV_CONF="/tmp/resolv.conf"
+
+hotplug_event() {
+	scan_interfaces
+	for ifc in $interfaces; do
+		config_get ifname $ifc ifname
+		[ "$ifname" = "$interface" ] || continue
+
+		config_get proto $ifc proto
+		[ "$proto" = "dhcp" ] || continue
+
+		env -i ACTION="$1" INTERFACE="$ifname" PROTO=dhcp /sbin/hotplug iface
+	done
+}
+
+case "$1" in
+	deconfig)
+		ifconfig $interface 0.0.0.0
+		hotplug_event ifdown
+	;;
+	renew|bound)
+		ifconfig $interface $ip \
+		netmask ${subnet:-255.255.255.0} \
+		broadcast ${broadcast:-+}
+
+		if [ -n "$router" ] ; then
+			echo "deleting routers"
+			while route del default gw 0.0.0.0 dev $interface >&- 2>&- ; do :; done
+					
+			for i in $router ; do
+				echo "adding router $i"
+				route add default gw $i dev $interface
+			done
+		fi
+		
+		[ -n "$dns" ] && {
+			echo -n > $RESOLV_CONF
+			${domain:+echo search $domain} >> $RESOLV_CONF
+			for i in $dns ; do
+				echo "adding dns $i"
+				echo "nameserver $i" >> $RESOLV_CONF
+			done
+		}
+		
+		hotplug_event ifup
+		
+		# user rules
+		[ -f /etc/udhcpc.user ] && . /etc/udhcpc.user
+	;;
+esac
+
+exit 0
diff --git a/package/base-files/rb532-2.6/etc/config/network b/package/base-files/rb532-2.6/etc/config/network
new file mode 100644
index 0000000000..8279690574
--- /dev/null
+++ b/package/base-files/rb532-2.6/etc/config/network
@@ -0,0 +1,12 @@
+# Copyright (C) 2006 OpenWrt.org
+
+config interface loopback
+	option ifname	lo
+	option proto	static
+	option ipaddr	127.0.0.1
+	option netmask	255.0.0.0
+
+config interface lan
+	option ifname	eth0
+	option proto	dhcp
+
diff --git a/package/base-files/sibyte-2.6/etc/config/network b/package/base-files/sibyte-2.6/etc/config/network
new file mode 100644
index 0000000000..9b65652f06
--- /dev/null
+++ b/package/base-files/sibyte-2.6/etc/config/network
@@ -0,0 +1,14 @@
+# Copyright (C) 2006 OpenWrt.org
+
+config interface loopback
+	option ifname	lo
+	option proto	static
+	option ipaddr	127.0.0.1
+	option netmask	255.0.0.0
+
+config interface lan
+	option type 	bridge
+	option ifname	"eth0 ath0"
+	option proto	static
+	option ipaddr	192.168.1.1
+	option netmask	255.255.255.0
diff --git a/package/base-files/sibyte-2.6/etc/inittab b/package/base-files/sibyte-2.6/etc/inittab
new file mode 100644
index 0000000000..a6f4e17f01
--- /dev/null
+++ b/package/base-files/sibyte-2.6/etc/inittab
@@ -0,0 +1,5 @@
+# Copyright (C) 2006 OpenWrt.org
+
+::sysinit:/etc/init.d/rcS
+duart/0::askfirst:/bin/ash --login
+#tts/1::askfirst:/bin/ash --login
diff --git a/package/base-files/src/adam2patcher.c b/package/base-files/src/adam2patcher.c
new file mode 100644
index 0000000000..25a78074a6
--- /dev/null
+++ b/package/base-files/src/adam2patcher.c
@@ -0,0 +1,59 @@
+/*
+ * patcher.c - ADAM2 patcher for Netgear DG834 (and compatible)
+ *
+ * Copyright (C) 2006 Felix Fietkau
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stddef.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <stdint.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+#include <string.h>
+
+#include <sys/ioctl.h>
+
+int main(int argc, char **argv)
+{
+	int fd;
+	char *ptr;
+	uint32_t *i;
+
+	if (argc != 2) {
+		fprintf(stderr, "Usage: %s <filename>\n", argv[0]);
+		exit(1);
+	}
+
+	if (((fd = open(argv[1], O_RDWR)) < 0)
+			|| ((ptr = mmap(0, 128 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0)) == (void *) (-1))) {
+		fprintf(stderr, "Can't open file\n");
+		exit(1);
+	}
+
+	i = (uint32_t *) &ptr[0x3944];
+	if (*i == 0x0c000944) {
+		fprintf(stderr, "Unpatched ADAM2 detected. Patching... ");
+		*i = 0x00000000;
+		msync(i, sizeof(*i), MS_SYNC|MS_INVALIDATE);
+		fprintf(stderr, "done!\n");
+	} else if (*i == 0x00000000) {
+		fprintf(stderr, "Patched ADAM2 detected.\n");
+	} else {
+		fprintf(stderr, "Unknown ADAM2 detected. Can't patch!\n");
+	}
+
+	close(fd);		
+}
diff --git a/package/base-files/src/jffs2root.c b/package/base-files/src/jffs2root.c
new file mode 100644
index 0000000000..14662fc945
--- /dev/null
+++ b/package/base-files/src/jffs2root.c
@@ -0,0 +1,133 @@
+/*
+ * jffs2root.c
+ *
+ * Copyright (C) 2005 Mike Baker 
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * $Id$
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stddef.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+#include <string.h>
+
+#include <sys/ioctl.h>
+#include <linux/mtd/mtd.h>
+
+#define FILENAME "/dev/mtdblock/1"
+
+struct trx_header {
+	unsigned magic;		/* "HDR0" */
+	unsigned len;		/* Length of file including header */
+	unsigned crc32;		/* 32-bit CRC from flag_version to end of file */
+	unsigned flag_version;	/* 0:15 flags, 16:31 version */
+	unsigned offsets[3];	/* Offsets of partitions from start of header */
+};
+
+unsigned long *crc32;
+
+void init_crc32()
+{
+	unsigned long crc;
+	unsigned long poly = 0xEDB88320L;
+	int n, bit;
+	if ((crc32 = (unsigned long *) malloc(256 * sizeof(unsigned long))) == (void *)-1) {
+		perror("malloc");
+		exit(1);
+	}
+	for (n = 0; n < 256; n++) {
+	crc = (unsigned long) n;
+	for (bit = 0; bit < 8; bit++)
+		crc = (crc & 1) ? (poly ^ (crc >> 1)) : (crc >> 1);
+	crc32[n] = crc;
+	}
+}
+
+unsigned int crc32buf(char *buf, size_t len)
+{
+	unsigned int crc = 0xFFFFFFFF;
+	for (; len; len--, buf++)
+	crc = crc32[(crc ^ *buf) & 0xff] ^ (crc >> 8);
+	return crc;
+}
+
+int main(int argc, char **argv)
+{
+	int fd;
+	struct mtd_info_user mtdInfo;
+	unsigned long len;
+	struct trx_header *ptr;
+	char *buf;
+	
+	if (((fd = open(FILENAME, O_RDWR))	< 0)
+			|| ((len = lseek(fd, 0, SEEK_END)) < 0)
+			|| ((ptr = (struct trx_header *) mmap(0, len, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0)) == (void *) (-1))
+			|| (ptr->magic != 0x30524448)) {
+		printf("Error reading trx info\n");
+		exit(-1);
+	}
+	close (fd);
+
+	if (((fd = open("/dev/mtd/1", O_RDWR))	< 0)
+			|| (ioctl(fd, MEMGETINFO, &mtdInfo))) {
+		fprintf(stderr, "Could not get MTD device info from %s\n", FILENAME);
+		close(fd);
+		exit(1);
+	}
+	close(fd);
+
+	if (argc > 1 && !strcmp(argv[1],"--move")) {
+		if (ptr->offsets[2] >= ptr->len) {
+			printf("Partition already moved outside trx\n");
+		} else {
+			init_crc32();
+			ptr->offsets[2] +=	(mtdInfo.erasesize - 1);
+			ptr->offsets[2] &= ~(mtdInfo.erasesize - 1);
+			ptr->len = ptr->offsets[2];
+			ptr->crc32 = crc32buf((void *) &(ptr->flag_version), ptr->len - offsetof(struct trx_header, flag_version));
+			msync(ptr,sizeof(struct trx_header),MS_SYNC|MS_INVALIDATE);
+			printf("Partition moved; please reboot\n");
+		}
+	} else if (argc > 1 && !strcmp(argv[1], "--clean")) {
+		buf = (char *) ptr;
+		if (buf[ptr->offsets[1] - 1] == 0) {
+			init_crc32();
+			buf[ptr->offsets[1] - 1] = 1;
+			ptr->crc32 = crc32buf((void *) &(ptr->flag_version), ptr->len - offsetof(struct trx_header, flag_version));
+			msync(ptr,sizeof(struct trx_header),MS_SYNC|MS_INVALIDATE);
+			printf("Partition marked as clean\n");
+		}
+	} else {
+		int x;
+		printf(" erase: 0x%08x\n",mtdInfo.erasesize);
+		printf("=== trx ===\n");
+		printf("mapped: 0x%08x\n", (unsigned)ptr);
+		printf(" magic: 0x%08x\n", ptr->magic);
+		printf("	 len: 0x%08x\n", ptr->len);
+		printf("	 crc: 0x%08x\n", ptr->crc32);
+		for (x = 0; x < 3; x++)
+			printf(" offset[%d]: 0x%08x\n", x, ptr->offsets[x]);
+	}
+
+	munmap((void *) ptr, len);
+	return 0;
+}
diff --git a/package/base-files/x86-2.4/etc/config/network b/package/base-files/x86-2.4/etc/config/network
new file mode 100644
index 0000000000..68d8e4240e
--- /dev/null
+++ b/package/base-files/x86-2.4/etc/config/network
@@ -0,0 +1,19 @@
+# Copyright (C) 2006 OpenWrt.org
+
+config interface loopback
+	option ifname	lo
+	option proto	static
+	option ipaddr	127.0.0.1
+	option netmask	255.0.0.0
+
+config interface lan
+	option type 	bridge
+	option ifname	"eth1 eth2"
+	option proto	static
+	option ipaddr	192.168.1.1
+	option netmask	255.255.255.0
+
+config interface wan
+	option ifname	eth0
+	option proto	dhcp
+
diff --git a/package/base-files/x86-2.6/etc/config/network b/package/base-files/x86-2.6/etc/config/network
new file mode 100644
index 0000000000..68d8e4240e
--- /dev/null
+++ b/package/base-files/x86-2.6/etc/config/network
@@ -0,0 +1,19 @@
+# Copyright (C) 2006 OpenWrt.org
+
+config interface loopback
+	option ifname	lo
+	option proto	static
+	option ipaddr	127.0.0.1
+	option netmask	255.0.0.0
+
+config interface lan
+	option type 	bridge
+	option ifname	"eth1 eth2"
+	option proto	static
+	option ipaddr	192.168.1.1
+	option netmask	255.255.255.0
+
+config interface wan
+	option ifname	eth0
+	option proto	dhcp
+
diff --git a/package/base-files/xscale-2.6/etc/config/network b/package/base-files/xscale-2.6/etc/config/network
new file mode 100644
index 0000000000..1d9b55b2d3
--- /dev/null
+++ b/package/base-files/xscale-2.6/etc/config/network
@@ -0,0 +1,11 @@
+# Network configuration file
+
+config interface loopback
+	option ifname	lo
+	option proto	static
+	option ipaddr	127.0.0.1
+	option netmask	255.0.0.0
+
+config interface lan
+	option ifname	eth0
+	option proto	dhcp