allow building of kernel-specific stuff in package/ instead of target/linux/package/ and merge target/linux/package/base-files into package/base-files

git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@3855 3c298f89-4303-0410-b956-a3cf2f4a3e73

3 files changed, 217 insertions, 0 deletions

diff --git a/package/base-files/brcm-2.4/etc/hotplug.d/net/09-net b/package/base-files/brcm-2.4/etc/hotplug.d/net/09-net
new file mode 100644
index 0000000000..9dd77963ba
--- /dev/null
+++ b/package/base-files/brcm-2.4/etc/hotplug.d/net/09-net
@@ -0,0 +1,43 @@
+#!/bin/sh
+setup_wl()
+{
+	[ -f /proc/net/wl0 ] && {
+		lsmod | grep wlcompat >&- || insmod wlcompat
+	}
+	iwconfig "$INTERFACE" 2>&- | grep -v 'no wireless' >&- && {
+		/sbin/wifi
+	}
+}
+setup_eth()
+{
+	[ -d /proc/switch ] || {
+		insmod switch-core
+		insmod switch-robo || insmod switch-adm
+	}
+	if="$(echo "$INTERFACE" | sed s,eth,et,)"
+	ifconfig "$INTERFACE" up 2>&- >&-
+	[ -d "/proc/switch/$INTERFACE" ] || return 0
+	echo "1" > "/proc/switch/$INTERFACE/reset"
+	echo "1" > "/proc/switch/$INTERFACE/enable_vlan"
+	for vlan in $(seq 0 15); do
+		eval "hwname=\"\${vlan${vlan}hwname}\""
+		[ "$hwname" = "$if" ] && {
+			eval "vports=\"\${vlan${vlan}ports}\""
+			[ -n "$vports" ] && echo "$vports" > "/proc/switch/$INTERFACE/vlan/$vlan/ports"
+			$DEBUG vconfig add "$INTERFACE" "$vlan"
+		}
+	done
+}
+
+do_register()
+{
+	case "${INTERFACE%%[0-9]*}" in
+		eth) setup_eth;;
+		wl) setup_wl;;
+	esac
+}
+
+
+case "$ACTION" in
+	add|register) do_register;;
+esac
diff --git a/package/base-files/brcm-2.4/etc/init.d/S04nvram b/package/base-files/brcm-2.4/etc/init.d/S04nvram
new file mode 100755
index 0000000000..4de124735b
--- /dev/null
+++ b/package/base-files/brcm-2.4/etc/init.d/S04nvram
@@ -0,0 +1,66 @@
+#!/bin/sh
+# NVRAM setup
+#
+# This file handles the NVRAM quirks of various hardware.
+
+# WGT634u
+grep 'mtd0: 00060000' /proc/mtd 2>&- >&- && exit
+
+alias debug=${DEBUG:-:}
+
+nvram_default() {
+	[ -z "$(nvram get $1)" ] && nvram set "$1=$2"
+}
+
+nvram_set() { # for the linksys fixup part
+	[ "$(nvram get "$1")" = "$2" -a "$2" != "" ] || {
+		COMMIT=1
+		/usr/sbin/nvram set "$1=$2"
+	}
+}
+
+# work around braindead CFE defaults in linksys routers
+boardtype=$(nvram get boardtype)
+boardnum=$(nvram get boardnum)
+boardflags=$(($(nvram get boardflags)))
+adm_switch="$(( ($boardflags & 0x80) >> 7 ))"
+
+case "$(( $boardtype ))" in
+	"1800") #0x708
+		if [ "$adm_switch" = 0 ]; then
+			nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))"
+			[ "$COMMIT" = 1 ] && {
+				nvram_set sdram_config 0x0062
+				nvram_set clkfreq 216
+				nvram_set sdram_ncdl 0x0
+				nvram_set pa0itssit 62
+				nvram_set pa0b0 0x15eb
+				nvram_set pa0b1 0xfa82
+				nvram_set pa0b2 0xfe66
+				nvram_set pa0maxpwr 0x4e
+			}
+		fi
+	;;
+	"1127") #0x467
+		nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))"
+		[ "$COMMIT" = 1 ] && {
+			nvram_set sdram_config 0x0062
+			nvram_set sdram_ncdl 0x0
+			nvram_set pa0itssit 62
+			nvram_set pa0b0 0x168b
+			nvram_set pa0b1 0xfabf
+			nvram_set pa0b2 0xfeaf
+			nvram_set pa0maxpwr 0x4e
+		}
+	;;
+esac
+[ "$COMMIT" = "1" ] && nvram commit
+
+# hack for some motorola routers
+nvram unset wl0gpio0
+
+[ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && {
+	# if default wifi mac, set two higher than the lan mac
+	nvram set il0macaddr=$(nvram get et0macaddr|
+	awk '{OFS=FS=":";for(x=7,y=2;--x;){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}')
+}
diff --git a/package/base-files/brcm-2.4/etc/init.d/S05netconfig b/package/base-files/brcm-2.4/etc/init.d/S05netconfig
new file mode 100755
index 0000000000..6a626f54a5
--- /dev/null
+++ b/package/base-files/brcm-2.4/etc/init.d/S05netconfig
@@ -0,0 +1,108 @@
+#!/bin/sh
+[ -e /etc/config/network ] && exit 0
+
+mkdir -p /etc/config
+
+(
+	if grep 'mtd0: 00060000' /proc/mtd 2>&- >&-; then
+		# WGT634u
+		echo boardtype=wgt634u
+	else
+		strings /dev/mtdblock/3
+	fi
+) | awk '
+function p(name) {
+	if (c[name] != "") print name "=\"" c[name] "\""
+}
+
+BEGIN {
+	FS="="
+	c["lan_ifname"]="br0"
+	c["lan_ifnames"]="vlan0 eth1"
+	c["wan_proto"]="none"
+	c["wan_ifname"]="vlan1"
+	c["vlan0ports"]="1 2 3 4 5*"
+	c["vlan1ports"]="0 5"
+}
+
+($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") {
+	nvram[$1] = $2
+}
+
+END {
+	# v1 hardware
+	if (nvram["boardtype"] == "bcm94710dev") {
+		# Linksys WRT54G v1.x
+		if (nvram["boardnum"] == "42") {
+			c["vlan0ports"]=""
+			c["vlan1ports"]=""
+			c["lan_ifnames"]="vlan2 eth2"
+		}
+
+		# Asus WL-500g
+		if (nvram["boardnum"] == "asusX") {
+			c["lan_ifnames"]="eth0 eth1 eth2" # FIXME
+			# wan_ifname=eth1
+		}
+	}
+	if (nvram["boardtype"] == "wgt634u") {
+		c["vlan0ports"] = "0 1 2 3 5*"
+		c["vlan1ports"] = "4 5"
+		c["lan_ifnames"] = "vlan0 ath0"
+	}
+	if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) {
+		c["vlan0ports"] = "0 1 2 3 5*"
+		c["vlan1ports"] = "4 5"
+	}
+
+	# WAP54G
+	if ((nvram["boardnum"] == "2") || \
+		(nvram["boardnum"] == "1024")) {
+		c["lan_ifnames"]="eth0 eth1"
+		c["wan_ifname"]=""
+	}
+
+	print "#### VLAN configuration "
+	print "vlan0hwname=et0"
+	print "vlan1hwname=et0"
+	p("vlan0ports")
+	p("vlan1ports")
+	print ""
+	print ""
+	
+	print "#### LAN configuration"
+	print "lan_proto=\"static\""
+	p("lan_ifname")
+	p("lan_ifnames")
+	print "lan_ipaddr=\"192.168.1.1\""
+	print "lan_netmask=\"255.255.255.0\""
+	print "# lan_dns=\"192.168.1.1\""
+	print "# lan_gateway=\"192.168.1.1\""
+
+	print ""
+	print ""
+
+	print "#### WAN configuration"
+	print "# wan_proto: WAN protocol, available protocols:"
+	print "#   none: disable"
+	print "#   dhcp: DHCP"
+	print "#   static: Static IP"
+	print "#   pppoe: PPP over Ethernet"
+	print "#   pptp: Point-to-Point tunneling Protocol"
+	print "#     for pppoe and pptp you need to use wan_ifname=\"ppp0\""
+	print ""
+	print "wan_proto=dhcp"
+	p("wan_ifname")
+	print "wan_device=\"" c["wan_ifname"] "\""
+	print "# wan_ipaddr=\"192.168.0.2\""
+	print "# wan_netmask=\"255.255.255.0\""
+	print "# wan_gateway=\"192.168.0.1\""
+	print "# wan_dns=\"192.168.0.1\""
+	print ""
+	print "## PPP over Ethernet and PPTP"
+	print "# wan_ifname=\"ppp0\""
+	print "# ppp_username=\"my_username\""
+	print "# ppp_passwd=\"my_password\""
+	print "# pptp_server_ip=\"192.168.0.1\""
+}
+' > /etc/config/network