diff options
| author | Roger Pueyo Centelles <roger.pueyo@guifi.net> | 2020-10-23 16:05:28 +0200 |
|---|---|---|
| committer | Baptiste Jonglez <git@bitsofnetworks.org> | 2021-05-03 14:57:29 +0200 |
| commit | 701d25b551144cacd5d7fd8024fd2e6c7c264b70 (patch) | |
| tree | 8d5e2a7742167b8563e345aef1c9d47e925eed02 /feeds.conf.default | |
| parent | 3ce7f1e477c97099fdc905ae7c921e1790d52d0c (diff) | |
| download | upstream-701d25b551144cacd5d7fd8024fd2e6c7c264b70.tar.gz upstream-701d25b551144cacd5d7fd8024fd2e6c7c264b70.tar.bz2 upstream-701d25b551144cacd5d7fd8024fd2e6c7c264b70.zip | |
ipq40xx: add support for MikroTik SXTsq 5 ac
This commit adds support for the MikroTik SXTsq 5 ac (RBSXTsqG-5acD),
an outdoor 802.11ac wireless CPE with one 10/100/1000 Mbps Ethernet
port.
Specifications:
- SoC: Qualcomm Atheros IPQ4018
- RAM: 256 MB
- Storage: 16 MB NOR
- Wireless: IPQ4018 (SoC) 802.11a/n/ac 2x2:2, 16 dBi antennae
- Ethernet: IPQ4018 (SoC) 1x 10/100/1000 port, 10-28 Vdc PoE in
- 1x Ethernet LED (green)
- 7x user-controllable LEDs
· 1x power (blue)
· 1x user (green)
· 5x rssi (green)
Note:
Serial UART is probably available on the board, but it has not been
tested.
Flashing:
Boot via TFTP the initramfs image. Then, upload a sysupgrade image
via SSH and flash it normally. More info at the "Common procedures
for MikroTik products" page https://openwrt.org/toh/mikrotik/common.
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
(cherry picked from commit d1f1e5269ed992e6fc30d575b43b0913c9e58ca2)
[Compile and Run Tested]
Signed-off-by: Nick Hainke <vincent@systemli.org>
Diffstat (limited to 'feeds.conf.default')
0 files changed, 0 insertions, 0 deletions