diff options
author | Marcin Gordziejewski <openwrt@flicksfix.com> | 2022-04-08 00:29:20 +0200 |
---|---|---|
committer | Hauke Mehrtens <hauke@hauke-m.de> | 2022-05-17 21:14:23 +0200 |
commit | 7152bc84f4adc750112bc426244e93cba8d2a922 (patch) | |
tree | bc54438bb6bb8f221da033c912457569bf7fceb8 /Config.in | |
parent | d627ea510c36c2d2049bc062d236aea2c23bd636 (diff) | |
download | upstream-7152bc84f4adc750112bc426244e93cba8d2a922.tar.gz upstream-7152bc84f4adc750112bc426244e93cba8d2a922.tar.bz2 upstream-7152bc84f4adc750112bc426244e93cba8d2a922.zip |
ramips: add support for TP-Link RE650 v2
TP-Link RE650 v2 is largely similar to v1 that
is already supported by OpenWrt. Notable differences
is differnt SPI Flash - 8 MB instead of 16 MB
(from cFeon instead of Winbond) and a different
configuration of PCIE connections to wifi chips.
Otherwise it's largely the same product as v1
Hardware specification:
- SoC 880 MHz - MediaTek MT7621AT
- 128 MB of DDR3 RAM
- 8 MB - cFeon QH64A-104HIP
- 4T4R 2.4 GHz - MediaTek MT7615E
- 4T4R 5 GHz - MediaTek MT7615E
- 1x 1 Gbps Ethernet - MT7621AT integrated
- 7x LEDs (Power, 2G, 5G, WPS(x2), Lan(x2))
- 4x buttons (Reset, Power, WPS, LED)
- UART pinout - GND, RX, TX, labeled in the middle of the PCB,
requires soldering because they're not through holes.
Serial console @ 57600,8n1
Flash instructions:
Upload
openwrt-ramips-mt7621-tplink_re650-v2-squashfs-factory.bin
from the RE650 web interface.
TFTP recovery to stock firmware:
I didn't try recovering back to the stock firmware, however,
if there is such process for other RExxx devices, it seems like
it could be similar here.
Signed-off-by: Marcin Gordziejewski <openwrt@flicksfix.com>
(cherry picked from commit 39799974a372fb4333d21f077c670b8a56b9d696)
Diffstat (limited to 'Config.in')
0 files changed, 0 insertions, 0 deletions