move menuconfig options into separate files

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38895

1 files changed, 6 insertions, 514 deletions

diff --git a/Config.in b/Config.in
index b7706b4deb..52135ba579 100644
--- a/Config.in
+++ b/Config.in
@@ -1,4 +1,4 @@
-# Copyright (C) 2006-2012 OpenWrt.org
+# Copyright (C) 2006-2013 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -16,526 +16,18 @@ config HAVE_DOT_CONFIG
 
 source "target/Config.in"
 
-menu "Target Images"
+source "config/Config-images.in"
 
-	menuconfig TARGET_ROOTFS_INITRAMFS
-		bool "ramdisk"
-		default y if USES_INITRAMFS
-		help
-		  Embed the rootfs into the kernel (initramfs)
+source "config/Config-build.in"
 
-		choice
-			prompt "Compression"
-			default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ar71xx
-			default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ramips
-			default TARGET_INITRAMFS_COMPRESSION_NONE
-			depends on TARGET_ROOTFS_INITRAMFS
-			help
-			  Select ramdisk compression.
-
-			config TARGET_INITRAMFS_COMPRESSION_NONE
-				bool "none"
-
-			config TARGET_INITRAMFS_COMPRESSION_GZIP
-				bool "gzip"
-
-			config TARGET_INITRAMFS_COMPRESSION_BZIP2
-				bool "bzip2"
-
-			config TARGET_INITRAMFS_COMPRESSION_LZMA
-				bool "lzma"
-
-			config TARGET_INITRAMFS_COMPRESSION_LZO
-				bool "lzo"
-
-			config TARGET_INITRAMFS_COMPRESSION_LZ4
-				bool "lz4"
-
-			config TARGET_INITRAMFS_COMPRESSION_XZ
-				bool "xz"
-		endchoice
-
-		config EXTERNAL_CPIO
-			string
-			prompt "Use external cpio" if TARGET_ROOTFS_INITRAMFS
-			default ""
-			help
-			  Kernel uses specified external cpio as INITRAMFS_SOURCE
-
-	comment "Root filesystem archives"
-
-	config TARGET_ROOTFS_CPIOGZ
-		bool "cpio.gz"
-		default y if USES_CPIOGZ
-		help
-		  Build a compressed cpio archive of the the root filesystem
-
-	config TARGET_ROOTFS_TARGZ
-		bool "tar.gz"
-		default y if USES_TARGZ
-		help
-		  Build a compressed tar archive of the the root filesystem
-
-	comment "Root filesystem images"
-
-	config TARGET_ROOTFS_EXT4FS
-		bool "ext4"
-		default y if USES_EXT4
-		help
-		  Ext4 file system with some free space for uml images
-
-	config TARGET_ROOTFS_ISO
-		bool "iso"
-		default n
-		depends on TARGET_x86_generic
-		help
-		  Create some bootable ISO image
-
-	config TARGET_ROOTFS_JFFS2
-		bool "jffs2"
-		default y if USES_JFFS2
-		help
-		  Build a jffs2 root filesystem
-
-	config TARGET_ROOTFS_JFFS2_NAND
-		bool "jffs2 for NAND"
-		default y if USES_JFFS2_NAND
-		depends on USES_JFFS2_NAND
-		help
-		  Build a jffs2 root filesystem for NAND flash
-
-	config TARGET_ROOTFS_SQUASHFS
-		bool "squashfs"
-		default y if USES_SQUASHFS
-		help
-		  Build a squashfs-lzma root filesystem
-
-	menuconfig TARGET_ROOTFS_UBIFS
-		bool "ubifs"
-		default y if USES_UBIFS
-		depends on USES_UBIFS
-		help
-		  Build a ubifs root filesystem
-
-		choice
-			prompt "compression"
-			default TARGET_UBIFS_COMPRESSION_NONE
-			depends on TARGET_ROOTFS_UBIFS
-			help
-			  Select compression type
-
-			config TARGET_UBIFS_COMPRESSION_NONE
-				bool "none"
-
-			config TARGET_UBIFS_COMPRESSION_LZO
-				bool "lzo"
-
-			config TARGET_UBIFS_COMPRESSION_ZLIB
-				bool "zlib"
-		endchoice
-
-		config TARGET_UBIFS_FREE_SPACE_FIXUP
-			bool "free space fixup" if TARGET_ROOTFS_UBIFS
-			default y
-			help
-			  The file-system free space has to be fixed up on first mount
-
-		config TARGET_UBIFS_JOURNAL_SIZE
-			string
-			prompt "journal size" if TARGET_ROOTFS_UBIFS
-			default ""
-
-	comment "Image Options"
-
-	source "target/linux/*/image/Config.in"
-
-	config TARGET_ROOTFS_PARTSIZE
-		int "Root filesystem partition size (in MB)"
-		depends on X86_GRUB_IMAGES || TARGET_ROOTFS_EXT4FS || TARGET_rb532
-		default 48
-		help
-		  Allows you to change the root filesystem partition size
-
-	config TARGET_ROOTFS_MAXINODE
-		int "Maximum number of inodes in root filesystem"
-		depends on TARGET_ROOTFS_EXT4FS
-		default 6000
-		help
-		  Allows you to change the maximum number of inodes in the root filesystem
-
-	config TARGET_ROOTFS_RESERVED_PCT
-		int "Percentage of reserved blocks in root filesystem"
-		depends on TARGET_ROOTFS_EXT4FS
-		default 0
-		help
-		  Allows you to change the percentage of reserved blocks in the root filesystem
-
-	menuconfig TARGET_ROOTFS_INCLUDE_KERNEL
-		bool "Include kernel in root filesystem"
-		depends on TARGET_ROOTFS_UBIFS || TARGET_ROOTFS_EXT4FS
-		default n
-		help
-		  Include the kernel image in the rootfs. Typically the image is placed
-		  below /boot.
-
-		config TARGET_ROOTFS_INCLUDE_UIMAGE
-			bool "include uImage" if TARGET_ROOTFS_INCLUDE_KERNEL
-			default y
-			help
-			  This option might not apply to all targets. Make sure
-			  to check target/linux/<your_target>/image/Makefile to
-			  see if this option will have any effect.
-
-		config TARGET_ROOTFS_INCLUDE_ZIMAGE
-			bool "include zImage" if TARGET_ROOTFS_INCLUDE_KERNEL
-			default y
-			help
-			  This option might not apply to all targets. Make sure
-			  to check target/linux/<your_target>/image/Makefile to
-			  see if this option will have any effect.
-
-		config TARGET_ROOTFS_INCLUDE_FIT
-			bool "include FIT" if TARGET_ROOTFS_INCLUDE_KERNEL
-			default y
-			help
-			  This option might not apply to all targets. Make sure
-			  to check target/linux/<your_target>/image/Makefile to
-			  see if this option will have any effect.
-
-	config TARGET_ROOTFS_INCLUDE_DTB
-		bool "Include DTB in root filesystem"
-		depends on USES_DEVICETREE && (TARGET_ROOTFS_UBIFS || TARGET_ROOTFS_EXT4FS)
-		default n
-		help
-		  Include the device tree blob file(s) in the rootfs. Typically the DTBs
-		  are placed below /boot.
-
-endmenu
-
-menu "Global build settings"
-
-	config ALL
-		bool "Select all packages by default"
-		default n
-
-	comment "General build options"
-
-	config DISPLAY_SUPPORT
-		bool "Show packages that require graphics support (local or remote)"
-		default n
-
-	config BUILD_PATENTED
-		default y
-		bool "Compile with support for patented functionality"
-		help
-		  When this option is disabled, software which provides patented functionality will not be built.
-		  In case software provides optional support for patented functionality,
-		  this optional support will get disabled for this package.
-
-	config BUILD_NLS
-		default n
-		bool "Compile with full language support"
-		help
-		  When this option is enabled, packages are built with the full versions of iconv and GNU gettext
-		  instead of the default OpenWrt stubs. If uClibc is used, it is also built with locale support.
-
-	config BUILD_STATIC_TOOLS
-		default n
-		bool "Attempt to link host utilities statically"
-		help
-		  Linking host utilities like sed or firmware-utils statically increases the portability of the
-		  generated ImageBuilder and SDK tarballs, however it may fail on some Linux distributions.
-
-	config SHADOW_PASSWORDS
-		bool
-		prompt "Enable shadow password support"
-		default y
-		help
-		  Enable shadow password support.
-
-	config CLEAN_IPKG
-		bool
-		prompt "Remove ipkg/opkg status data files in final images"
-		default n
-		help
-		  This removes all ipkg/opkg status data files from the target directory before building the root fs
-
-	config COLLECT_KERNEL_DEBUG
-		bool
-		prompt "Collect kernel debug information"
-		select KERNEL_DEBUG_INFO
-		default n
-		help
-		  This collects debugging symbols from the kernel and all compiled modules.
-		  Useful for release builds, so that kernel issues can be debugged offline later.
-
-	comment "Kernel build options"
-
-	source "Config-kernel.in"
-
-	comment "Package build options"
-
-	config DEBUG
-		bool
-		prompt "Compile packages with debugging info"
-		default n
-		help
-		  Adds -g3 to the CFLAGS
-
-	config IPV6
-		bool
-		prompt "Enable IPv6 support in packages"
-		default y
-		help
-		  Enable IPV6 support in packages (passes --enable-ipv6 to configure scripts).
-
-	config PKG_BUILD_PARALLEL
-		bool
-		prompt "Compile certain packages parallelized"
-		default y
-		help
-		  This adds a -jX option to certain packages that are known to
-		  behave well for parallel build. By default the package make processes
-		  use the main jobserver, in which case this option only takes effect
-		  when you add -jX to the make command.
-
-		  If you are unsure, select N.
-
-	config PKG_BUILD_USE_JOBSERVER
-		bool
-		prompt "Use top-level make jobserver for packages"
-		depends on PKG_BUILD_PARALLEL
-		default y
-		help
-		  This passes the main make process jobserver fds to package builds,
-		  enabling full parallelization across different packages
-
-		  Note that disabling this may overcommit CPU resources depending on the
-		  -j level of the main make process, the number of package
-		  submake jobs selected below and the number of actual CPUs present.
-		  Example: If the main make is passed a -j4 and the submake -j
-		  is also set to 4, we may end up with 16 parallel make processes
-		  in the worst case.
-
-
-	config PKG_BUILD_JOBS
-		int
-		prompt "Number of package submake jobs (2-512)"
-		range 2 512
-		default 2
-		depends on PKG_BUILD_PARALLEL && !PKG_BUILD_USE_JOBSERVER
-		help
-		  The number of jobs (-jX) to pass to packages submake.
-
-	config PKG_DEFAULT_PARALLEL
-		bool
-		prompt "Parallelize the default package build rule (May break build)"
-		depends on PKG_BUILD_PARALLEL
-		depends on BROKEN
-		default n
-		help
-		  Always set the default package build rules to parallel build.
-
-		  WARNING: This may break build or kill your cat, as it builds
-		  packages with multiple jobs that are probably not tested in
-		  a parallel build environment.
-
-		  Only say Y, if you don't mind fixing broken packages.
-		  Before reporting build bugs, set this to N and re-run the build.
-
-	comment "Stripping options"
-
-	choice
-		prompt "Binary stripping method"
-		default USE_STRIP   if EXTERNAL_TOOLCHAIN
-		default USE_STRIP   if USE_GLIBC || USE_EGLIBC || USE_MUSL
-		default USE_SSTRIP
-		help
-		  Select the binary stripping method you wish to use.
-
-		config NO_STRIP
-			bool "none"
-			help
-			  This will install unstripped binaries (useful for native compiling/debugging)
-
-		config USE_STRIP
-			bool "strip"
-			help
-			  This will install binaries stripped using strip from binutils
-
-
-		config USE_SSTRIP
-			bool "sstrip"
-			depends on !DEBUG
-			depends on !USE_GLIBC
-			depends on !USE_EGLIBC
-			help
-			  This will install binaries stripped using sstrip
-	endchoice
-
-	config STRIP_ARGS
-		string
-		prompt "Strip arguments"
-		depends on USE_STRIP
-		default "--strip-unneeded --remove-section=.comment --remove-section=.note" if DEBUG
-		default "--strip-all"
-		help
-		  Specifies arguments passed to the strip command when stripping binaries
-
-	config STRIP_KERNEL_EXPORTS
-		bool "Strip unnecessary exports from the kernel image"
-		help
-		  Reduces kernel size by stripping unused kernel exports from the kernel image
-		  Note that this might make the kernel incompatible with any kernel modules that
-		  were not selected at the time the kernel image was created
-
-	config USE_MKLIBS
-		bool "Strip unnecessary functions from libraries"
-		help
-		  Reduces libraries to only those functions that are necessary for using all
-		  selected packages (including those selected as <M>)
-		  Note that this will make the system libraries incompatible with most of the packages
-		  that are not selected during the build process
-
-	choice
-		prompt "Preferred standard C++ library"
-		default USE_LIBSTDCXX if USE_EGLIBC
-		default USE_UCLIBCXX
-		help
-		  Select the preferred standard C++ library for all packages that support this.
-
-		config USE_UCLIBCXX
-			bool "uClibc++"
-
-		config USE_LIBSTDCXX
-			bool "libstdc++"
-	endchoice
-
-endmenu
-
-menuconfig DEVEL
-	bool "Advanced configuration options (for developers)"
-	default n
-
-	config BROKEN
-		bool "Show broken platforms / packages" if DEVEL
-		default n
-
-	config BINARY_FOLDER
-		string "Binary folder" if DEVEL
-		default ""
-
-	config DOWNLOAD_FOLDER
-		string "Download folder" if DEVEL
-		default ""
-
-	config LOCALMIRROR
-		string "Local mirror for source packages" if DEVEL
-		default ""
-
-	config AUTOREBUILD
-		bool "Automatic rebuild of packages" if DEVEL
-		default y
-		help
-		  Automatically rebuild packages when their files change
-
-	config BUILD_SUFFIX
-		string "Build suffix to append to the BUILD_DIR variable" if DEVEL
-		default ""
-		help
-		  Build suffix to append to the BUILD_DIR variable, i.e: build_dir_suffix
-
-	config TARGET_ROOTFS_DIR
-		string "Override the default TARGET_ROOTFS_DIR variable" if DEVEL
-		default ""
-		help
-		  Override the default TARGET_ROOTFS_DIR variable content $(BUILD_DIR) with custom path.
-		  Use this option to re-define the location of the target root file system directory.
-
-	config CCACHE
-		bool "Use ccache" if DEVEL
-		default n
-		help
-		  Compiler cache; see http://ccache.samba.org/
-
-	config EXTERNAL_KERNEL_TREE
-		string "Use external kernel tree" if DEVEL
-		default ""
-
-	config KERNEL_GIT_CLONE_URI
-		string "Enter git repository to clone" if DEVEL
-		default ""
-		help
-		  Enter the full git repository path i.e.:
-		  git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
-		  This will create a git clone of the kernel in your build
-		  directory.
-
-	config KERNEL_GIT_LOCAL_REPOSITORY
-		string "Enter path to local reference repository" if DEVEL
-		default ""
-		help
-		  Enter a full pathname to a local reference git repository.
-		  In this instance, the --refererence option of git clone will
-		  be used thus creating a quick local clone of your repo.
-
-	config BUILD_LOG
-		bool "Enable log files during build process" if DEVEL
-		help
-		  If enabled log files will be written to the ./log directory
-
-	config SRC_TREE_OVERRIDE
-		bool "Enable package source tree override" if DEVEL
-		help
-		  If enabled, you can force a package to use a git tree as source
-		  code instead of the normal tarball. Create a symlink 'git-src'
-		  in the package directory, pointing to the .git tree that you want
-		  to pull the source code from
-
-	config EXTRA_OPTIMIZATION
-		string "Additional compiler options" if DEVEL
-		default "-fno-caller-saves"
-		help
-		  Extra Target-independent optimizations to use when building for the target.
-
-menuconfig TARGET_OPTIONS
-	bool "Target Options"  if DEVEL
-
-	config TARGET_OPTIMIZATION
-		string "Target Optimizations" if TARGET_OPTIONS
-		default DEFAULT_TARGET_OPTIMIZATION
-		help
-		  Optimizations to use when building for the target host.
-
-	config SOFT_FLOAT
-		bool "Use software floating point by default" if TARGET_OPTIONS
-		default y
-		depends on (arm || armeb || powerpc || mipsel || mips || mips64el || mips64) && !HAS_FPU
-		help
-		  If your target CPU does not have a Floating Point Unit (FPU) or a
-		  kernel FPU emulator, but you still wish to support floating point
-		  functions, then everything will need to be compiled with soft floating
-		  point support (-msoft-float).
-
-		  Most people will answer N.
-
-	config USE_MIPS16
-		bool "Build packages with MIPS16 instructions" if TARGET_OPTIONS
-		depends on HAS_MIPS16
-		depends on !GCC_VERSION_4_6
-		default y
-		help
-		  If your target CPU does support the MIPS16 instruction set
-		  and you want to use it for packages, enable this option.
-		  MIPS16 produces smaller binaries thus reducing pressure on
-		  caches and TLB.
-
-		  Most people will answer N.
+source "config/Config-devel.in"
 
 source "toolchain/Config.in"
 
 source "target/imagebuilder/Config.in"
+
 source "target/sdk/Config.in"
+
 source "target/toolchain/Config.in"
 
 source "tmp/.config-package.in"