diff options
| author | Robert Marko <robimarko@gmail.com> | 2024-02-17 13:41:36 +0100 |
|---|---|---|
| committer | Robert Marko <robimarko@gmail.com> | 2024-02-17 17:32:13 +0100 |
| commit | b38a1d6c65ddb469981284d5215cb2ec05cbb86f (patch) | |
| tree | 12f3d9808a848bddfcbff8beb840df58e64ff9c3 | |
| parent | dadad6bb731ff1025125c619da7ccc196ad6ea01 (diff) | |
| download | upstream-b38a1d6c65ddb469981284d5215cb2ec05cbb86f.tar.gz upstream-b38a1d6c65ddb469981284d5215cb2ec05cbb86f.tar.bz2 upstream-b38a1d6c65ddb469981284d5215cb2ec05cbb86f.zip | |
qualcommax: ipq807x: 301w: correct PHY mode for AQR
Interfaces that have AQR-s attached to them are using USXGMII and not just
the default SGMII.
This was fine until SSDK added some sanity checking and now on Qnap 301W it
would fail with:
[ 24.740197] nss-dp 3a001800.dp5 10g-1 (uninitialized): failed to connect to phy device
[ 24.740264] nss-dp: probe of 3a001800.dp5 failed with error -14
So, lets fix 10G AQR ports by declaring the correct PHY mode.
Signed-off-by: Robert Marko <robimarko@gmail.com>
| -rw-r--r-- | target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts index 58eefc30ba9..081e932b5c7 100644 --- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts +++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts @@ -485,12 +485,14 @@ &dp5 { status = "okay"; qcom,mactype = <1>; + phy-mode = "usxgmii"; phy-handle = <&aqr113c_8>; label = "10g-1"; }; &dp6_syn { status = "okay"; + phy-mode = "usxgmii"; phy-handle = <&aqr113c_0>; label = "10g-2"; }; |