diff options
| author | Sungbo Eo <mans0n@gorani.run> | 2020-03-13 04:19:32 +0900 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-03-13 14:05:00 +0100 |
| commit | 6410c30dc7cefdf06dca1e09d1c337138aa4abea (patch) | |
| tree | 25ead09721a462cb6c9b9eb917b94b5dac95d6c2 | |
| parent | b9f4f1f97aeeec65a872c4c5b1a0528a69d16d7b (diff) | |
| download | upstream-6410c30dc7cefdf06dca1e09d1c337138aa4abea.tar.gz upstream-6410c30dc7cefdf06dca1e09d1c337138aa4abea.tar.bz2 upstream-6410c30dc7cefdf06dca1e09d1c337138aa4abea.zip | |
ramips: add support for TOTOLINK A3
TOTOLINK A3 is a clone of ipTIME A3. The only difference is the model name.
Specifications:
- SoC: MT7628AN
- RAM: DDR2 64MB
- Flash: SPI NOR 8MB
- WiFi:
- 2.4GHz: SoC internal
- 5GHz: MT7612EN
- Ethernet: 3x 10/100Mbps
- Switch: SoC internal
Installation via web interface:
1. Flash **initramfs** image through the stock web interface.
2. Boot into OpenWrt and perform sysupgrade with sysupgrade image.
Revert to stock firmware:
1. Perform sysupgrade with stock image.
Tested on device by JasonHCH <hsuan670629@gmail.com>
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
| -rw-r--r-- | target/linux/ramips/dts/mt7628an_totolink_a3.dts | 36 | ||||
| -rw-r--r-- | target/linux/ramips/image/mt76x8.mk | 9 | ||||
| -rwxr-xr-x | target/linux/ramips/mt76x8/base-files/etc/board.d/02_network | 6 |
3 files changed, 49 insertions, 2 deletions
diff --git a/target/linux/ramips/dts/mt7628an_totolink_a3.dts b/target/linux/ramips/dts/mt7628an_totolink_a3.dts new file mode 100644 index 0000000000..87dd8559b7 --- /dev/null +++ b/target/linux/ramips/dts/mt7628an_totolink_a3.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7628an_iptime.dtsi" + +/ { + compatible = "totolink,a3", "mediatek,mt7628an-soc"; + model = "TOTOLINK A3"; + + aliases { + led-boot = &led_cpu; + led-failsafe = &led_cpu; + led-running = &led_cpu; + led-upgrade = &led_cpu; + }; + + leds { + compatible = "gpio-leds"; + + led_cpu: cpu { + label = "a3:blue:cpu"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + wlan { + label = "a3:blue:wlan"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + }; +}; + +&esw { + mediatek,portmap = <0x3e>; + mediatek,portdisable = <0x32>; +}; diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index faa2ca1c5a..51f630f42a 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -229,6 +229,15 @@ define Device/tama_w06 endef TARGET_DEVICES += tama_w06 +define Device/totolink_a3 + IMAGE_SIZE := 7936k + UIMAGE_NAME := za3 + DEVICE_VENDOR := TOTOLINK + DEVICE_MODEL := A3 + DEVICE_PACKAGES := kmod-mt76x2 +endef +TARGET_DEVICES += totolink_a3 + define Device/totolink_lr1200 IMAGE_SIZE := 7872k DEVICE_VENDOR := TOTOLINK diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index 913a0817dc..5230717506 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -72,7 +72,8 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "0:lan" "1:lan" "4:wan" "6@eth0" ;; - iptime,a3) + iptime,a3|\ + totolink,a3) ucidef_add_switch "switch0" \ "2:lan:2" "3:lan:1" "0:wan" "6@eth0" ;; @@ -166,7 +167,8 @@ ramips_setup_macs() wan_mac=$(macaddr_add "$lan_mac" 1) ;; iptime,a3|\ - iptime,a604m) + iptime,a604m|\ + totolink,a3) wan_mac=$(mtd_get_mac_binary u-boot 0x1fc40) ;; mediatek,linkit-smart-7688|\ |