diff options
author | Florian Fainelli <florian@openwrt.org> | 2011-01-27 21:49:56 +0000 |
---|---|---|
committer | Florian Fainelli <florian@openwrt.org> | 2011-01-27 21:49:56 +0000 |
commit | a5adea5c2a9450805ecf9433cb2784fc6c5a8279 (patch) | |
tree | abe7bd70d5be742a20c9aaca78bbd130fc97c114 | |
parent | 2689e63f5852ff7a3085cdfcc98bd7f9288a799f (diff) | |
download | upstream-a5adea5c2a9450805ecf9433cb2784fc6c5a8279.tar.gz upstream-a5adea5c2a9450805ecf9433cb2784fc6c5a8279.tar.bz2 upstream-a5adea5c2a9450805ecf9433cb2784fc6c5a8279.zip |
clean up mach-adm8668 includes
This patch cleans up the include directory, as they were from vendors
2.4 GPL source. Now only what's used is there.
Signed-off-by: Scott Nicholas <scott.nicholas@scottn.us>
SVN-Revision: 25175
7 files changed, 58 insertions, 494 deletions
diff --git a/target/linux/adm8668/files/arch/mips/adm8668/platform.c b/target/linux/adm8668/files/arch/mips/adm8668/platform.c index e97ad6ab2d..4de38fd38f 100644 --- a/target/linux/adm8668/files/arch/mips/adm8668/platform.c +++ b/target/linux/adm8668/files/arch/mips/adm8668/platform.c @@ -85,9 +85,9 @@ static void adm8668_restart(char *cmd) int i; /* stop eth0 and eth1 */ - ADM8668_LAN_REG(NETCSR6) = BIT_1|BIT_13; + ADM8668_LAN_REG(NETCSR6) = (1 << 13) | (1 << 1); ADM8668_LAN_REG(NETCSR7) = 0; - ADM8668_WAN_REG(NETCSR6) = BIT_1|BIT_13; + ADM8668_WAN_REG(NETCSR6) = (1 << 13) | (1 << 1); ADM8668_WAN_REG(NETCSR7) = 0; /* reset PHY */ @@ -105,7 +105,7 @@ static void adm8668_restart(char *cmd) /* the real deal */ for (i = 0; i < 1000; i++) ; - ADM8668_CONFIG_REG(ADM8668_CR1) = BIT_0; + ADM8668_CONFIG_REG(ADM8668_CR1) = 1; } int __devinit adm8668_devs_register(void) diff --git a/target/linux/adm8668/files/arch/mips/adm8668/prom.c b/target/linux/adm8668/files/arch/mips/adm8668/prom.c index 53731c1b10..7187f29825 100644 --- a/target/linux/adm8668/files/arch/mips/adm8668/prom.c +++ b/target/linux/adm8668/files/arch/mips/adm8668/prom.c @@ -96,7 +96,7 @@ void __init prom_setup_cmdline(void) prom_argv[i] = (char *)KSEG0ADDR(prom_argv[i]); /* default bootargs has "console=/dev/ttyS0" yet console won't - * show up at all if you do this ... */ + * show up at all if you include the '/dev/' nowadays ... */ if (match_tag(prom_argv[i], "console=/dev/")) { char *ptr = prom_argv[i] + strlen("console=/dev/"); @@ -128,7 +128,6 @@ void __init prom_init(void) memsize = bd->bi_memsize; printk("Board info:\n"); - printk(" Board ID: %#lx\n", bd->bi_arch_number); printk(" RAM size: %d MB\n", (int)memsize/(1024*1024)); printk(" NOR start: %#lx\n", bd->bi_flashstart); printk(" NOR size: %#lx\n", bd->bi_flashsize); diff --git a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/adm8668.h b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/adm8668.h index 7898ccf938..2cf65d81a6 100644 --- a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/adm8668.h +++ b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/adm8668.h @@ -9,20 +9,7 @@ #ifndef __ADM8668_H__ #define __ADM8668_H__ -#include <asm/addrspace.h> -#include "bsp_sup.h" - -#define MEM_KSEG0_BASE 0x80000000 -#define MEM_KSEG1_BASE 0xA0000000 -#define MEM_SEG_MASK 0xE0000000 -#define KVA2PA(_addr) ((unsigned long)(_addr) & ~MEM_SEG_MASK) - -#define MIPS_KSEG0A(_addr) (KVA2PA(_addr) | MEM_KSEG0_BASE) -#define MIPS_KSEG1A(_addr) (KVA2PA(_addr) | MEM_KSEG1_BASE) - -#define PA2VA(_addr) (KVA2PA(_addr) | MEM_KSEG1_BASE) -#define PA2CACHEVA(_addr) (KVA2PA(_addr) | MEM_KSEG0_BASE) - +#define SYS_CLOCK 175000000 /*======================= Physical Memory Map ============================*/ #define ADM8668_SDRAM_BASE 0 @@ -37,115 +24,45 @@ #define ADM8668_TMR_BASE 0x1E200000 #define ADM8668_UART0_BASE 0x1E400000 #define ADM8668_SMEM0_BASE 0x1FC00000 -#define ADM8668_NAND_BASE 0x1fffff00 +#define ADM8668_NAND_BASE 0x1FFFFF00 #define PCICFG_BASE 0x12200000 #define PCIDAT_BASE 0x12400000 -/* for PCI bridge fixup ! */ -#define PCI_BRIDGE_MASK 0x40 - -/* WLAN registers */ -#define WCSR0 0x00 -#define WCSR11A 0x5c - -#define GPIO_REG WCSR11A - -#define ADM8668_WLAN_REG(_reg) \ - (*((volatile unsigned int *)(PA2VA(ADM8668_WLAN_BASE + (_reg))))) +/** onboard uart **/ +#define ADM8668_UARTCLK_FREQ 62500000 +/* registers */ +#define UART_DR_REG 0x00 +#define UART_RSR_REG 0x04 +#define UART_CR_REG 0x14 +#define UART_FR_REG 0x18 +#define UART_IIR_REG 0x1C -/* configuration registers */ -#define ADM8668_CR0 0x00 -#define ADM8668_CR1 0x04 -#define ADM8668_CR2 0x08 -#define ADM8668_CR3 0x0C -#define ADM8668_CR8 0x20 -#define ADM8668_CR10 0x28 -#define ADM8668_CR11 0x2C -#define ADM8668_CR12 0x30 -#define ADM8668_CR13 0x34 -#define ADM8668_CR14 0x38 -#define ADM8668_CR15 0x3C -#define ADM8668_CR16 0x40 -#define ADM8668_CR17 0x44 -#define ADM8668_CR18 0x48 -#define ADM8668_CR19 0x4C -#define ADM8668_CR20 0x50 -#define ADM8668_CR21 0x54 -#define ADM8668_CR22 0x58 -#define ADM8668_CR23 0x5C -#define ADM8668_CR24 0x60 -#define ADM8668_CR25 0x64 -#define ADM8668_CR26 0x68 -#define ADM8668_CR27 0x6C -#define ADM8668_CR28 0x70 -#define ADM8668_CR29 0x74 -#define ADM8668_CR30 0x78 -#define ADM8668_CR31 0x7C -#define ADM8668_CR32 0x80 -#define ADM8668_CR33 0x84 -#define ADM8668_CR34 0x88 -#define ADM8668_CR35 0x8C -#define ADM8668_CR36 0x90 -#define ADM8668_CR37 0x94 -#define ADM8668_CR38 0x98 -#define ADM8668_CR39 0x9C -#define ADM8668_CR40 0xA0 -#define ADM8668_CR41 0xA4 -#define ADM8668_CR42 0xA8 -#define ADM8668_CR43 0xAC -#define ADM8668_CR44 0xB0 -#define ADM8668_CR45 0xB4 -#define ADM8668_CR46 0xB8 -#define ADM8668_CR47 0xBC -#define ADM8668_CR48 0xC0 -#define ADM8668_CR49 0xC4 -#define ADM8668_CR50 0xC8 -#define ADM8668_CR51 0xCC -#define ADM8668_CR52 0xD0 -#define ADM8668_CR53 0xD4 -#define ADM8668_CR54 0xD8 -#define ADM8668_CR55 0xDC -#define ADM8668_CR56 0xE0 -#define ADM8668_CR57 0xE4 -#define ADM8668_CR58 0xE8 -#define ADM8668_CR59 0xEC -#define ADM8668_CR60 0xF0 -#define ADM8668_CR61 0xF4 -#define ADM8668_CR62 0xF8 -#define ADM8668_CR63 0xFC -#define ADM8668_CR64 0x100 -#define ADM8668_CR65 0x104 -#define ADM8668_CR66 0x108 -#define ADM8668_CR67 0x10C -#define ADM8668_CR68 0x110 +/* rsr reg */ +#define UART_FRAMING_ERR 0x01 +#define UART_PARITY_ERR 0x02 +#define UART_BREAK_ERR 0x04 +#define UART_OVERRUN_ERR 0x08 +#define UART_RX_STATUS_MASK 0x0F -#define CRGPIO_REG ADM8668_CR8 +/* cr reg */ +#define UART_RX_INT_EN 0x10 +#define UART_TX_INT_EN 0x20 +#define UART_RX_TIMEOUT_INT_EN 0x40 -#define ADM8668_CONFIG_REG(_reg) \ - (*((volatile unsigned int *)(PA2VA(ADM8668_CONFIG_BASE + (_reg))))) -#define ADM8668_MPMC_REG(_reg) \ - (*((volatile unsigned int *)(PA2VA(ADM8668_MPMC_BASE + (_reg))))) +/* fr reg */ +#define UART_RX_FIFO_EMPTY 0x10 +#define UART_TX_FIFO_FULL 0x20 +/* iir reg */ +#define UART_RX_INT 0x02 +#define UART_TX_INT 0x04 +#define UART_RX_TIMEOUT_INT 0x08 -/*========================== Interrupt Controller ==========================*/ -/* registers offset */ +/* interrupt controller */ #define IRQ_STATUS_REG 0x00 /* Read */ -#define IRQ_RAW_STATUS_REG 0x04 /* Read */ #define IRQ_ENABLE_REG 0x08 /* Read/Write */ #define IRQ_DISABLE_REG 0x0C /* Write */ -#define IRQ_SOFT_REG 0x10 /* Write */ - -#define FIQ_STATUS_REG 0x100 /* Read */ -#define FIQ_RAW_STATUS_REG 0x104 -#define FIQ_ENABLE_REG 0x108 -#define FIQ_DISABLE_REG 0x10c - - -/* Macro for accessing Interrupt controller register */ -#define ADM8668_INTC_REG(_reg) \ - (*((volatile unsigned long *)(PA2VA(ADM8668_INTC_BASE + (_reg))))) - /* interrupt levels */ #define INT_LVL_SWI 1 @@ -165,146 +82,31 @@ #define INT_LVL_USB 15 #define INT_LVL_MAX INT_LVL_USB -#define IRQ_MASK 0xffff - -#define IRQ_SWI (0x1<<INT_LVL_SWI) -#define IRQ_TIMERINT0 (0x1<<INT_LVL_TIMERINT0) -#define IRQ_TIMERINT1 (0x1<<INT_LVL_TIMERINT1) -#define IRQ_UART0 (0x1<<INT_LVL_UART0) -#define IRQ_LAN (0x1<<INT_LVL_LAN) -#define IRQ_WAN (0x1<<INT_LVL_WAN) -#define IRQ_WLAN (0x1<<INT_LVL_WLAN) -#define IRQ_GPIO (0x1<<INT_LVL_GPIO) -#define IRQ_IDEINT (0x1<<INT_LVL_IDE) -#define IRQ_PCI2 (0x1<<INT_LVL_PCI2) -#define IRQ_PCI1 (0x1<<INT_LVL_PCI1) -#define IRQ_PCI0 (0x1<<INT_LVL_PCI0) -#define IRQ_USB (0x1<<INT_LVL_USB) - - -/*=========================== UART Control Register ========================*/ -#define UART_DR_REG 0x00 -#define UART_RSR_REG 0x04 -#define UART_ECR_REG 0x04 -#define UART_LCR_H_REG 0x08 -#define UART_LCR_M_REG 0x0c -#define UART_LCR_L_REG 0x10 -#define UART_CR_REG 0x14 -#define UART_FR_REG 0x18 -#define UART_IIR_REG 0x1c -#define UART_ICR_REG 0x1C -#define UART_ILPR_REG 0x20 - -/* rsr/ecr reg */ -#define UART_OVERRUN_ERR 0x08 -#define UART_BREAK_ERR 0x04 -#define UART_PARITY_ERR 0x02 -#define UART_FRAMING_ERR 0x01 -#define UART_RX_STATUS_MASK 0x0f -#define UART_RX_ERROR ( UART_BREAK_ERR \ - | UART_PARITY_ERR \ - | UART_FRAMING_ERR) - -/* lcr_h reg */ -#define UART_SEND_BREAK 0x01 -#define UART_PARITY_EN 0x02 -#define UART_EVEN_PARITY 0x04 -#define UART_TWO_STOP_BITS 0x08 -#define UART_ENABLE_FIFO 0x10 - -#define UART_WLEN_5BITS 0x00 -#define UART_WLEN_6BITS 0x20 -#define UART_WLEN_7BITS 0x40 -#define UART_WLEN_8BITS 0x60 -#define UART_WLEN_MASK 0x60 - -/* cr reg */ -#define UART_PORT_EN 0x01 -#define UART_SIREN 0x02 -#define UART_SIRLP 0x04 -#define UART_MODEM_STATUS_INT_EN 0x08 -#define UART_RX_INT_EN 0x10 -#define UART_TX_INT_EN 0x20 -#define UART_RX_TIMEOUT_INT_EN 0x40 -#define UART_LOOPBACK_EN 0x80 - -/* fr reg */ -#define UART_CTS 0x01 -#define UART_DSR 0x02 -#define UART_DCD 0x04 -#define UART_BUSY 0x08 -#define UART_RX_FIFO_EMPTY 0x10 -#define UART_TX_FIFO_FULL 0x20 -#define UART_RX_FIFO_FULL 0x40 -#define UART_TX_FIFO_EMPTY 0x80 - -/* iir/icr reg */ -#define UART_MODEM_STATUS_INT 0x01 -#define UART_RX_INT 0x02 -#define UART_TX_INT 0x04 -#define UART_RX_TIMEOUT_INT 0x08 - -#define UART_INT_MASK 0x0f - -#ifdef _FPGA_ -#define ADM8668_UARTCLK_FREQ 3686400 -#else -#define ADM8668_UARTCLK_FREQ 62500000 -#endif - -#define UART_BAUDDIV(_rate) \ - ((unsigned long)(ADM8668_UARTCLK_FREQ/(16*(_rate)) - 1)) - -/* uart_baudrate */ -#define UART_230400bps_DIVISOR UART_BAUDDIV(230400) -#define UART_115200bps_DIVISOR UART_BAUDDIV(115200) -#define UART_76800bps_DIVISOR UART_BAUDDIV(76800) -#define UART_57600bps_DIVISOR UART_BAUDDIV(57600) -#define UART_38400bps_DIVISOR UART_BAUDDIV(38400) -#define UART_19200bps_DIVISOR UART_BAUDDIV(19200) -#define UART_14400bps_DIVISOR UART_BAUDDIV(14400) -#define UART_9600bps_DIVISOR UART_BAUDDIV(9600) -#define UART_2400bps_DIVISOR UART_BAUDDIV(2400) -#define UART_1200bps_DIVISOR UART_BAUDDIV(1200) - - -/*=========================== Counter Timer ==============================*/ -#define TIMER0_REG_BASE ADM8668_TMR_BASE -#define TIMER1_REG_BASE ADM8668_TMR_BASE+0x20 - -#define TIMER_LOAD_REG 0x00 -#define TIMER_VALUE_REG 0x04 -#define TIMER_CTRL_REG 0x08 -#define TIMER_CLR_REG 0x0c - -/* TIMER_LOAD_REG */ -#ifdef _FPGA_ -#define SYS_CLOCK 56000000 -#else -#define SYS_CLOCK 175000000 -#endif - -#define SYS_PRESCALE 256 - -#define TMR_10MS_TICKS (SYS_CLOCK/SYS_PRESCALE/100) - -/* TIMER_CTRL_REG */ -#define TMR_PRESCALE_1 0x00 -#define TMR_PRESCALE_16 0x04 -#define TMR_PRESCALE_256 0x08 -#define TMR_MODE_PERIODIC 0x40 -#define TMR_ENABLE 0x80 - -/* TIMER_CLR_REG */ -#define TMR_CLEAR_BIT 1 - +/* register access macros */ +#define ADM8668_INTC_REG(_reg) \ + (*((volatile unsigned long *)(KSEG1ADDR(ADM8668_INTC_BASE + (_reg))))) +#define ADM8668_LAN_REG(_reg) \ + (*((volatile unsigned int *)(KSEG1ADDR(ADM8668_LAN_BASE + (_reg))))) +#define ADM8668_WAN_REG(_reg) \ + (*((volatile unsigned int *)(KSEG1ADDR(ADM8668_WAN_BASE + (_reg))))) +#define ADM8668_WLAN_REG(_reg) \ + (*((volatile unsigned int *)(KSEG1ADDR(ADM8668_WLAN_BASE + (_reg))))) +#define ADM8668_CONFIG_REG(_reg) \ + (*((volatile unsigned int *)(KSEG1ADDR(ADM8668_CONFIG_BASE + (_reg))))) -/* Macro for access MPMC register */ -#define ADM8668_TMR_REG(base, _offset) \ - (*((volatile unsigned long *)(PA2VA(base + (_offset))))) +/* lan registers */ +#define NETCSR6 0x30 +#define NETCSR7 0x38 +#define NETCSR37 0xF8 +/* known/used CPU configuration registers */ +#define ADM8668_CR0 0x00 +#define ADM8668_CR1 0x04 +#define ADM8668_CR3 0x0C -/* For GPIO control */ +/** For GPIO control **/ +#define GPIO_REG 0x5C /* on WLAN */ +#define CRGPIO_REG 0x20 /* on CPU */ #define GPIO0_OUTPUT_ENABLE 0x1000 #define GPIO1_OUTPUT_ENABLE 0x2000 #define GPIO2_OUTPUT_ENABLE 0x4000 @@ -334,83 +136,4 @@ #define CRGPIO_TOGGLE(num) \ ADM8668_CONFIG_REG(CRGPIO_REG) ^= (1 << (6 + num)) - -/*==========================================================================*/ -/* Cache Controller */ -#define ADM8668_CACHE_LINE_SIZE 16 - -#define BIT_0 0x00000001 -#define BIT_1 0x00000002 -#define BIT_2 0x00000004 -#define BIT_3 0x00000008 -#define BIT_4 0x00000010 -#define BIT_5 0x00000020 -#define BIT_6 0x00000040 -#define BIT_7 0x00000080 -#define BIT_8 0x00000100 -#define BIT_9 0x00000200 -#define BIT_10 0x00000400 -#define BIT_11 0x00000800 -#define BIT_12 0x00001000 -#define BIT_13 0x00002000 -#define BIT_14 0x00004000 -#define BIT_15 0x00008000 -#define BIT_16 0x00010000 -#define BIT_17 0x00020000 -#define BIT_18 0x00040000 -#define BIT_19 0x00080000 -#define BIT_20 0x00100000 -#define BIT_21 0x00200000 -#define BIT_22 0x00400000 -#define BIT_23 0x00800000 -#define BIT_24 0x01000000 -#define BIT_25 0x02000000 -#define BIT_26 0x04000000 -#define BIT_27 0x08000000 -#define BIT_28 0x10000000 -#define BIT_29 0x20000000 -#define BIT_30 0x40000000 -#define BIT_31 0x80000000 - -/* network regs */ -#define NETCSR0 0x0 -#define NETCSR1 0x08 -#define NETCSR2 0x10 -#define NETCSR3 0x18 -#define NETCSR4 0x20 -#define NETCSR5 0x28 -#define NETCSR6 0x30 -#define NETCSR7 0x38 -#define NETCSR8 0x40 -#define NETCSR9 0x48 -#define NETCSR10 0x50 -#define NETCSR11 0x58 -#define NETCSR12 0x60 -#define NETCSR13 0x68 -#define NETCSR14 0x70 -#define NETCSR15 0x78 -#define NETCSR36 0xD0 -#define NETCSR36A 0xD4 -#define NETCSR36B 0xD8 -#define NETCSR36C 0xDC // dummy -#define NETCSR36D 0xE0 -#define NETCSR36E 0xE4 -#define NETCSR36F 0xE8 -#define NETCSR36G 0xEC -#define NETCSR36H 0xF0 -#define NETCSR36I 0xF4 -#define NETCSR37 0xF8 - -/* for descriptor skip DWs */ -#define NETDESCSKIP_1DW BIT_2 -#define NETDESCSKIP_2DW BIT_3 -#define NETDESCSKIP_3DW (BIT_3|BIT_2) -#define NETDESCSKIP_4DW BIT_4 - - -#define ADM8668_LAN_REG(_reg) \ - (*((volatile unsigned int *)(PA2VA(ADM8668_LAN_BASE + (_reg))))) -#define ADM8668_WAN_REG(_reg) \ - (*((volatile unsigned int *)(PA2VA(ADM8668_WAN_BASE + (_reg))))) - #endif /* __ADM8668_H__ */ diff --git a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/bsp_sup.h b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/bsp_sup.h deleted file mode 100644 index 23fdab97c2..0000000000 --- a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/bsp_sup.h +++ /dev/null @@ -1,84 +0,0 @@ -/************************************************************************ - * - * Copyright (c) 2005 - * Infineon Technologies AG - * St. Martin Strasse 53; 81669 Muenchen; Germany - * - ************************************************************************/ -#ifndef _BSP_SUP_H_ -#define _BSP_SUP_H_ - -#define ADD_WAN_MAC -#define CONFIG_IFX_GAN -#define UBOOT_CFG_ENV_SIZE (0x400-4) -#define ADM8668_BL_MAGIC 0x6c62676d -#define ADM8668_MAC_MAGIC 0x69666164 -#define ADM8668_VER_MAGIC 0x7276676d -#define ADM8668_ID_MAGIC 0x6469676d -#define ADM8668_IF_MAGIC 0x6669676d -#define ADM8668_WANMAC_MAGIC 0x69666164 -#define ADM8668_IMEI_MAGIC 0x6669676e - -#define BSP_IFNAME_MAX_LEN 15 -#define BOOT_LINE_SIZE 255 -#define BSP_STR_LEN 79 - - -/* - * Boot mode configuration - */ -typedef struct BTMODE_CFG_S -{ - unsigned long btmode; - unsigned long dlmethod; -} BTMODE_CFG_T; - - -/* - * Interface configuration - */ -typedef struct IF_CFG_S -{ - char ifname[BSP_IFNAME_MAX_LEN+1]; - unsigned long ip; - unsigned long mask; - unsigned long gateway; -} IF_CFG_T; - - -/* - * Board configuration - */ -typedef struct BOARD_CFG_S -{ - unsigned long blmagic; - unsigned char blreserved[UBOOT_CFG_ENV_SIZE]; - - unsigned long macmagic; - unsigned char mac[8]; - unsigned long macnum; - - unsigned long idmagic; - unsigned char serial[BSP_STR_LEN+1]; - - unsigned long vermagic; - unsigned char ver[BSP_STR_LEN+1]; - - unsigned long ifmagic; - IF_CFG_T ifcfg[8]; - - unsigned long btmagic; - BTMODE_CFG_T bootmode; - - unsigned long wanmagic; - unsigned char wanmac[8]; - - unsigned long imeimagic; - unsigned char imei0[16]; - unsigned char imei1[16]; -} BOARD_CFG_T, *PBOARD_CFG_T; - -#define ADM8668_BOARD_CFG_ADDR (ADM8668_SMEM0_BASE + CONFIG_ADM8668_BSP_OFFSET*1024) -#define ADM8668_BOARD_CFG_SIZE (CONFIG_ADM8668_BSP_SIZE*1024) - -#endif /* _BSP_SUP_H_ */ diff --git a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/irq.h b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/irq.h index 425bba6a9f..1341309f2b 100644 --- a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/irq.h +++ b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/irq.h @@ -8,28 +8,9 @@ #ifndef __ASM_MACH_ADM8668_IRQ_H #define __ASM_MACH_ADM8668_IRQ_H -#ifndef NR_IRQS -#define NR_IRQS 32 -#endif +#define NR_IRQS 32 +#define MIPS_CPU_IRQ_BASE 16 -#ifdef CONFIG_IRQ_CPU - -#ifndef MIPS_CPU_IRQ_BASE -#define MIPS_CPU_IRQ_BASE 16 -#endif - -#ifdef CONFIG_IRQ_CPU_RM7K -#ifndef RM7K_CPU_IRQ_BASE -#define RM7K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+8) -#endif -#endif - -#ifdef CONFIG_IRQ_CPU_RM9K -#ifndef RM9K_CPU_IRQ_BASE -#define RM9K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+12) -#endif -#endif - -#endif /* CONFIG_IRQ_CPU */ +#define IRQ_MASK 0xffff #endif /* __ASM_MACH_ADM8668_IRQ_H */ diff --git a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/prom.h b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/prom.h deleted file mode 100644 index 000d0f4a46..0000000000 --- a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/prom.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * MIPS boards bootprom interface for the Linux kernel. - * - */ -/************************************************************************ - * - * Copyright (c) 2005 - * Infineon Technologies AG - * St. Martin Strasse 53; 81669 Muenchen; Germany - * - ************************************************************************/ -#ifndef _MIPS_PROM_H -#define _MIPS_PROM_H - -extern char *prom_getcmdline(void); -extern char *prom_getenv(char *name); -extern void setup_prom_printf(int tty_no); -extern void prom_printf(char *fmt, ...); -extern void prom_init_cmdline(void); -extern void prom_meminit(void); -extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem); -extern void prom_free_prom_memory (void); -extern void mips_display_message(const char *str); -extern void mips_display_word(unsigned int num); -extern int get_ethernet_addr(char *ethernet_addr); - -/* Memory descriptor management. */ -#define PROM_MAX_PMEMBLOCKS 32 -struct prom_pmemblock { - unsigned long base; /* Within KSEG0. */ - unsigned int size; /* In bytes. */ - unsigned int type; /* free or prom memory */ -}; - -#endif /* !(_MIPS_PROM_H) */ diff --git a/target/linux/adm8668/image/lzma-loader/src/Makefile b/target/linux/adm8668/image/lzma-loader/src/Makefile index c1be46ffdd..998e390810 100644 --- a/target/linux/adm8668/image/lzma-loader/src/Makefile +++ b/target/linux/adm8668/image/lzma-loader/src/Makefile @@ -5,7 +5,7 @@ # See /LICENSE for more information. # RAMSTART = 0x80000000 -RAMSIZE = 0x00800000 # 1MB +RAMSIZE = 0x00800000 # 8MB LOADADDR = 0x80400000 # RAM start + 4M KERNEL_ENTRY = 0x80002000 |