diff options
| author | Hauke Mehrtens <hauke@hauke-m.de> | 2013-07-12 13:46:27 +0000 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2013-07-12 13:46:27 +0000 |
| commit | 9e9261a7182c82947f1bbd7f63aa6a93a783e02e (patch) | |
| tree | 77b0578b21c88e818fb6fb4507ea7c4325654582 | |
| parent | 92961e09178746996cba8fea04482d69a7e69201 (diff) | |
| download | upstream-9e9261a7182c82947f1bbd7f63aa6a93a783e02e.tar.gz upstream-9e9261a7182c82947f1bbd7f63aa6a93a783e02e.tar.bz2 upstream-9e9261a7182c82947f1bbd7f63aa6a93a783e02e.zip | |
bcm53xx: add initial support for ARM based BCM47XX and BCM53XX SoCs
This was only tested on a Netgear R6250, but it could also work on
other devices when the correct images are generated.
It is only possible to boot into a ram disk, no Ethernet, Wifi, flash,
USB is supported.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37268
15 files changed, 1428 insertions, 0 deletions
diff --git a/target/linux/bcm53xx/Makefile b/target/linux/bcm53xx/Makefile new file mode 100644 index 0000000000..ea3a3326bc --- /dev/null +++ b/target/linux/bcm53xx/Makefile @@ -0,0 +1,29 @@ +# +# Copyright (C) 2013 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk + +ARCH:=arm +BOARD:=bcm53xx +BOARDNAME:=Broadcom BCM47xx/53xx with ARM CPU +FEATURES:=squashfs usb pci pcie gpio +MAINTAINER:=Hauke Mehrtens <hauke@hauke-m.de> + +LINUX_VERSION:=3.10 + +include $(INCLUDE_DIR)/target.mk + +define Target/Description + Build firmware images for Broadcom based BCM47xx/53xx routers with ARM CPU, *not* MIPS. +endef + +CFLAGS:=-Os -pipe -mtune=cortex-a9 -march=armv7-a -mfpu=vfp -mfloat-abi=softfp + +KERNELNAME:="zImage dtbs" + +DEFAULT_PACKAGES += + +$(eval $(call BuildTarget)) diff --git a/target/linux/bcm53xx/config-3.10 b/target/linux/bcm53xx/config-3.10 new file mode 100644 index 0000000000..6d1017f147 --- /dev/null +++ b/target/linux/bcm53xx/config-3.10 @@ -0,0 +1,207 @@ +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_ARCH_BCM is not set +CONFIG_ARCH_BCM53XX=y +CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_HAS_TICK_BROADCAST=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_MULTIPLATFORM=y +# CONFIG_ARCH_MULTI_CPU_AUTO is not set +# CONFIG_ARCH_MULTI_V6 is not set +CONFIG_ARCH_MULTI_V6_V7=y +CONFIG_ARCH_MULTI_V7=y +# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set +CONFIG_ARCH_NR_GPIO=0 +# CONFIG_ARCH_OMAP2PLUS is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SUNXI is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_ARCH_VIRT is not set +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +# CONFIG_ARCH_WM8850 is not set +CONFIG_ARM=y +CONFIG_ARM_APPENDED_DTB=y +# CONFIG_ARM_ATAG_DTB_COMPAT is not set +# CONFIG_ARM_CPU_SUSPEND is not set +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_643719 is not set +# CONFIG_ARM_ERRATA_720789 is not set +# CONFIG_ARM_ERRATA_754322 is not set +# CONFIG_ARM_ERRATA_754327 is not set +# CONFIG_ARM_ERRATA_764369 is not set +# CONFIG_ARM_ERRATA_798181 is not set +CONFIG_ARM_GIC=y +CONFIG_ARM_GLOBAL_TIMER=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_ARM_L1_CACHE_SHIFT_6=y +# CONFIG_ARM_LPAE is not set +CONFIG_ARM_NR_BANKS=8 +CONFIG_ARM_PATCH_PHYS_VIRT=y +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +CONFIG_ARM_VIRT_EXT=y +CONFIG_ATAGS=y +CONFIG_AUTO_ZRELADDR=y +CONFIG_BCMA=y +CONFIG_BCMA_BLOCKIO=y +CONFIG_BCMA_DEBUG=y +CONFIG_BCMA_DRIVER_GMAC_CMN=y +CONFIG_BCMA_HOST_SOC=y +CONFIG_BGMAC=y +# CONFIG_CACHE_L2X0 is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y +CONFIG_CLKSRC_OF=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_COMMON_CLK=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +CONFIG_CPU_HAS_ASID=y +# CONFIG_CPU_ICACHE_DISABLE is not set +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_RMAP=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_V7=y +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_DEBUG_BCM53XX=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_LL=y +CONFIG_DEBUG_LL_INCLUDE="debug/bcm53xx.S" +CONFIG_DEBUG_UNCOMPRESS=y +CONFIG_DEBUG_USER=y +CONFIG_DTC=y +CONFIG_EARLY_PRINTK=y +CONFIG_FRAME_POINTER=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GPIO_DEVRES=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_AOUT=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_ARM_SCU=y +CONFIG_HAVE_ARM_TWD=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_HAVE_BPF_JIT=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_GENERIC_HARDIRQS=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_HAVE_KERNEL_XZ=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_SMP=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_UID16=y +CONFIG_HZ_PERIODIC=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_WORK=y +CONFIG_KTIME_SCALAR=y +CONFIG_LOCAL_TIMERS=y +# CONFIG_MCPM is not set +CONFIG_MDIO_BOARDINFO=y +CONFIG_MODULES_USE_ELF_REL=y +# CONFIG_MPCORE_WATCHDOG is not set +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_PHYSMAP_OF is not set +CONFIG_MULTI_IRQ_HANDLER=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_NEED_DMA_MAP_STATE=y +# CONFIG_NET_IP_TUNNEL is not set +CONFIG_NR_CPUS=4 +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_DEVICE=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_IRQ=y +CONFIG_OF_MDIO=y +CONFIG_OF_MTD=y +CONFIG_OF_NET=y +CONFIG_OLD_SIGACTION=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PCI_SYSCALL is not set +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PHYLIB=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_RCU_STALL_COMMON=y +# CONFIG_RCU_USER_QS is not set +CONFIG_RFS_ACCEL=y +CONFIG_RPS=y +CONFIG_SCHED_HRTICK=y +# CONFIG_SCSI_DMA is not set +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SMP=y +CONFIG_SMP_ON_UP=y +CONFIG_SPARSE_IRQ=y +CONFIG_STOP_MACHINE=y +# CONFIG_SWP_EMULATE is not set +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +# CONFIG_TEGRA_HOST1X is not set +# CONFIG_THUMB2_KERNEL is not set +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TREE_RCU=y +CONFIG_UID16=y +CONFIG_UIDGID_CONVERTED=y +CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_XHCI is not set +CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_USE_OF=y +CONFIG_VECTORS_BASE=0xffff0000 +# CONFIG_VFP is not set +# CONFIG_XEN is not set +CONFIG_XPS=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_BCJ=y +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/bcm53xx/image/Makefile b/target/linux/bcm53xx/image/Makefile new file mode 100644 index 0000000000..62544c6492 --- /dev/null +++ b/target/linux/bcm53xx/image/Makefile @@ -0,0 +1,56 @@ +# +# Copyright (C) 2013 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/image.mk + +define Image/Prepare + rm -f $(KDIR)/fs_mark + echo -ne '\xde\xad\xc0\xde' > $(KDIR)/fs_mark + $(call prepare_generic_squashfs,$(KDIR)/fs_mark) +endef + +define Image/Build/Initramfs + $(call Image/Build/Initramfs/Chk,bcm5301-netgear-r6250,U12H245T00_NETGEAR,2,initramfs) +endef + +define Image/Build/Initramfs/Chk + $(call Image/Build/Initramfs/DTB,$(1)) + $(STAGING_DIR_HOST)/bin/mkchkimg -o $(BIN_DIR)/openwrt-$(1)-$(4).chk -k $(KDIR)/$(IMG_PREFIX)-$(4)-$(1).trx -b $(2) -r $(3) +endef + +define Image/Build/Initramfs/DTB + $(call Image/Build/DTB,zImage-initramfs,$(1)) + $(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/$(IMG_PREFIX)-initramfs-$(1).trx \ + -f $(KDIR)/zImage-initramfs-$(1).lzma +endef + +define Image/Build/squashfs/DTB + $(call Image/Build/DTB,zImage,$(1)) + $(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/$(IMG_PREFIX)-squashfs-$(1).trx \ + -f $(KDIR)/zImage-$(1).lzma \ + -a 1024 -f $(KDIR)/root.squashfs -a 0x10000 -A $(KDIR)/fs_mark +endef + +define Image/Build/squashfs/Chk + $(call Image/Build/squashfs/DTB,$(1)) + $(STAGING_DIR_HOST)/bin/mkchkimg -o $(BIN_DIR)/openwrt-$(1)-$(4).chk -k $(KDIR)/$(IMG_PREFIX)-$(4)-$(1).trx -b $(2) -r $(3) +endef + +define Image/Build/DTB + rm -f $(KDIR)/$(1)-$(2).lzma + rm -f $(KDIR)/$(1)-$(2).dts + cat $(KDIR)/$(1) $(LINUX_DIR)/arch/$(ARCH)/boot/dts/$(2).dtb > $(KDIR)/$(1)-$(2).dts; + $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/$(1)-$(2).dts $(KDIR)/$(1)-$(2).lzma -d16 +endef + +define Image/Build + $(call Image/Build/$(1),$(1)) + $(call Image/Build/squashfs/Chk,bcm5301-netgear-r6250,U12H245T00_NETGEAR,2,squashfs) +endef + + +$(eval $(call BuildImage)) diff --git a/target/linux/bcm53xx/patches-3.10/0001-clocksource-arm_global_timer-Add-ARM-global-timer-su.patch b/target/linux/bcm53xx/patches-3.10/0001-clocksource-arm_global_timer-Add-ARM-global-timer-su.patch new file mode 100644 index 0000000000..90c117880a --- /dev/null +++ b/target/linux/bcm53xx/patches-3.10/0001-clocksource-arm_global_timer-Add-ARM-global-timer-su.patch @@ -0,0 +1,421 @@ +From 403eb25e5ae7a2169d8c1eae9df4162815e7c3ba Mon Sep 17 00:00:00 2001 +From: Stuart Menefy <stuart.menefy at> +Date: Wed, 26 Jun 2013 11:48:38 +0000 +Subject: [PATCH 01/17] clocksource:arm_global_timer: Add ARM global timer + support. + +This is a simple driver for the global timer module found in the Cortex +A9-MP cores from revision r1p0 onwards. This should be able to perform +the functions of the system timer and the local timer in an SMP system. + +The global timer has the following features: + The global timer is a 64-bit incrementing counter with an +auto-incrementing feature. It continues incrementing after sending +interrupts. The global timer is memory mapped in the private memory +region. + The global timer is accessible to all Cortex-A9 processors in the +cluster. Each Cortex-A9 processor has a private 64-bit comparator that +is used to assert a private interrupt when the global timer has reached +the comparator value. All the Cortex-A9 processors in a design use the +banked ID, ID27, for this interrupt. ID27 is sent to the Interrupt +Controller as a Private Peripheral Interrupt. The global timer is +clocked by PERIPHCLK. + +Signed-off-by: Stuart Menefy <stuart.menefy@st.com> +Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> +CC: Arnd Bergmann <arnd@arndb.de> +CC: Rob Herring <robherring2@gmail.com> +CC: Linus Walleij <linus.walleij@linaro.org> +CC: Will Deacon <will.deacon@arm.com> +CC: Thomas Gleixner <tglx@linutronix.de> +--- + .../devicetree/bindings/arm/global_timer.txt | 21 ++ + drivers/clocksource/Kconfig | 13 + + drivers/clocksource/Makefile | 1 + + drivers/clocksource/arm_global_timer.c | 325 ++++++++++++++++++++ + 4 files changed, 360 insertions(+) + create mode 100644 Documentation/devicetree/bindings/arm/global_timer.txt + create mode 100644 drivers/clocksource/arm_global_timer.c + +--- /dev/null ++++ b/Documentation/devicetree/bindings/arm/global_timer.txt +@@ -0,0 +1,21 @@ ++ ++* ARM Global Timer ++ Cortex-A9 are often associated with a per-core Global timer. ++ ++** Timer node required properties: ++ ++- compatible : Should be "arm,cortex-a9-global-timer" ++ Driver supports versions r2p0 and above. ++ ++- interrupts : One interrupt to each core ++ ++- reg : Specify the base address and the size of the GT timer ++ register window. ++ ++Example: ++ ++ timer@2c000600 { ++ compatible = "arm,cortex-a9-global-timer"; ++ reg = <0x2c000600 0x20>; ++ interrupts = <1 13 0xf01>; ++ }; +--- a/drivers/clocksource/Kconfig ++++ b/drivers/clocksource/Kconfig +@@ -67,6 +67,19 @@ config ARM_ARCH_TIMER + bool + select CLKSRC_OF if OF + ++config ARM_GLOBAL_TIMER ++ bool ++ select CLKSRC_OF if OF ++ help ++ This options enables support for the ARM global timer unit ++ ++config CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK ++ bool ++ depends on ARM_GLOBAL_TIMER ++ default y ++ help ++ Use ARM global timer clock source as sched_clock ++ + config CLKSRC_METAG_GENERIC + def_bool y if METAG + help +--- a/drivers/clocksource/Makefile ++++ b/drivers/clocksource/Makefile +@@ -28,4 +28,5 @@ obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exyno + obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o + + obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o ++obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o + obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o +--- /dev/null ++++ b/drivers/clocksource/arm_global_timer.c +@@ -0,0 +1,325 @@ ++/* ++ * drivers/clocksource/arm_global_timer.c ++ * ++ * Copyright (C) 2013 STMicroelectronics (R&D) Limited. ++ * Author: Stuart Menefy <stuart.menefy@st.com> ++ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <linux/init.h> ++#include <linux/interrupt.h> ++#include <linux/clocksource.h> ++#include <linux/clockchips.h> ++#include <linux/cpu.h> ++#include <linux/clk.h> ++#include <linux/err.h> ++#include <linux/io.h> ++#include <linux/of.h> ++#include <linux/of_irq.h> ++#include <linux/of_address.h> ++ ++#include <asm/sched_clock.h> ++#include <asm/cputype.h> ++ ++#define GT_COUNTER0 0x00 ++#define GT_COUNTER1 0x04 ++ ++#define GT_CONTROL 0x08 ++#define GT_CONTROL_TIMER_ENABLE BIT(0) /* this bit is NOT banked */ ++#define GT_CONTROL_COMP_ENABLE BIT(1) /* banked */ ++#define GT_CONTROL_IRQ_ENABLE BIT(2) /* banked */ ++#define GT_CONTROL_AUTO_INC BIT(3) /* banked */ ++ ++#define GT_INT_STATUS 0x0c ++#define GT_INT_STATUS_EVENT_FLAG BIT(0) ++ ++#define GT_COMP0 0x10 ++#define GT_COMP1 0x14 ++#define GT_AUTO_INC 0x18 ++ ++/* ++ * We are expecting to be clocked by the ARM peripheral clock. ++ * ++ * Note: it is assumed we are using a prescaler value of zero, so this is ++ * the units for all operations. ++ */ ++static void __iomem *gt_base; ++static unsigned long gt_clk_rate; ++static int gt_ppi; ++static struct clock_event_device __percpu *gt_evt; ++ ++/* ++ * To get the value from the Global Timer Counter register proceed as follows: ++ * 1. Read the upper 32-bit timer counter register ++ * 2. Read the lower 32-bit timer counter register ++ * 3. Read the upper 32-bit timer counter register again. If the value is ++ * different to the 32-bit upper value read previously, go back to step 2. ++ * Otherwise the 64-bit timer counter value is correct. ++ */ ++static u64 gt_counter_read(void) ++{ ++ u64 counter; ++ u32 lower; ++ u32 upper, old_upper; ++ ++ upper = readl_relaxed(gt_base + GT_COUNTER1); ++ do { ++ old_upper = upper; ++ lower = readl_relaxed(gt_base + GT_COUNTER0); ++ upper = readl_relaxed(gt_base + GT_COUNTER1); ++ } while (upper != old_upper); ++ ++ counter = upper; ++ counter <<= 32; ++ counter |= lower; ++ return counter; ++} ++ ++/** ++ * To ensure that updates to comparator value register do not set the ++ * Interrupt Status Register proceed as follows: ++ * 1. Clear the Comp Enable bit in the Timer Control Register. ++ * 2. Write the lower 32-bit Comparator Value Register. ++ * 3. Write the upper 32-bit Comparator Value Register. ++ * 4. Set the Comp Enable bit and, if necessary, the IRQ enable bit. ++ */ ++static void gt_compare_set(unsigned long delta, int periodic) ++{ ++ u64 counter = gt_counter_read(); ++ unsigned long ctrl = readl(gt_base + GT_CONTROL); ++ ++ counter += delta; ++ ctrl &= ~(GT_CONTROL_COMP_ENABLE | GT_CONTROL_IRQ_ENABLE); ++ ++ writel(ctrl, gt_base + GT_CONTROL); ++ writel(lower_32_bits(counter), gt_base + GT_COMP0); ++ writel(upper_32_bits(counter), gt_base + GT_COMP1); ++ ++ if (periodic) { ++ writel(delta, gt_base + GT_AUTO_INC); ++ ctrl |= GT_CONTROL_AUTO_INC; ++ } ++ ++ ctrl |= GT_CONTROL_COMP_ENABLE | GT_CONTROL_IRQ_ENABLE; ++ writel(ctrl, gt_base + GT_CONTROL); ++} ++ ++static void gt_clockevent_set_mode(enum clock_event_mode mode, ++ struct clock_event_device *clk) ++{ ++ unsigned long ctrl; ++ ++ switch (mode) { ++ case CLOCK_EVT_MODE_PERIODIC: ++ gt_compare_set(DIV_ROUND_CLOSEST(gt_clk_rate, HZ), 1); ++ break; ++ case CLOCK_EVT_MODE_ONESHOT: ++ case CLOCK_EVT_MODE_UNUSED: ++ case CLOCK_EVT_MODE_SHUTDOWN: ++ ctrl = readl(gt_base + GT_CONTROL); ++ ctrl &= ~(GT_CONTROL_COMP_ENABLE | ++ GT_CONTROL_IRQ_ENABLE | GT_CONTROL_AUTO_INC); ++ writel(ctrl, gt_base + GT_CONTROL); ++ break; ++ default: ++ break; ++ } ++} ++ ++static int gt_clockevent_set_next_event(unsigned long evt, ++ struct clock_event_device *unused) ++{ ++ gt_compare_set(evt, 0); ++ return 0; ++} ++ ++static irqreturn_t gt_clockevent_interrupt(int irq, void *dev_id) ++{ ++ struct clock_event_device *evt = dev_id; ++ ++ if (readl_relaxed(gt_base + GT_INT_STATUS) & ++ GT_INT_STATUS_EVENT_FLAG) { ++ /** ++ * ERRATA 740657( Global Timer can send 2 interrupts for ++ * the same event in single-shot mode) ++ * Workaround: ++ * Either disable single-shot mode. ++ * Or ++ * Modify the Interrupt Handler to avoid the ++ * offending sequence. This is achieved by clearing ++ * the Global Timer flag _after_ having incremented ++ * the Comparator register value to a higher value. ++ */ ++ if (!(readl_relaxed(gt_base + GT_CONTROL) & ++ GT_CONTROL_AUTO_INC)) ++ gt_compare_set(ULONG_MAX, 0); ++ ++ writel_relaxed(GT_INT_STATUS_EVENT_FLAG, ++ gt_base + GT_INT_STATUS); ++ ++ evt->event_handler(evt); ++ return IRQ_HANDLED; ++ } ++ ++ return IRQ_NONE; ++} ++ ++static int __cpuinit gt_clockevents_init(struct clock_event_device *clk) ++{ ++ int cpu = smp_processor_id(); ++ ++ clk->name = "arm_global_timer"; ++ clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; ++ clk->set_mode = gt_clockevent_set_mode; ++ clk->set_next_event = gt_clockevent_set_next_event; ++ clk->cpumask = cpumask_of(cpu); ++ clk->rating = 300; ++ clk->irq = gt_ppi; ++ clockevents_config_and_register(clk, gt_clk_rate, ++ 1, 0xffffffff); ++ enable_percpu_irq(clk->irq, IRQ_TYPE_NONE); ++ return 0; ++} ++ ++static void gt_clockevents_stop(struct clock_event_device *clk) ++{ ++ gt_clockevent_set_mode(CLOCK_EVT_MODE_UNUSED, clk); ++ disable_percpu_irq(clk->irq); ++} ++ ++static cycle_t gt_clocksource_read(struct clocksource *cs) ++{ ++ return gt_counter_read(); ++} ++ ++static struct clocksource gt_clocksource = { ++ .name = "arm_global_timer", ++ .rating = 300, ++ .read = gt_clocksource_read, ++ .mask = CLOCKSOURCE_MASK(64), ++ .flags = CLOCK_SOURCE_IS_CONTINUOUS, ++}; ++ ++#ifdef CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK ++static u32 notrace gt_sched_clock_read(void) ++{ ++ return gt_counter_read(); ++} ++#endif ++ ++static void __init gt_clocksource_init(void) ++{ ++ writel(0, gt_base + GT_CONTROL); ++ writel(0, gt_base + GT_COUNTER0); ++ writel(0, gt_base + GT_COUNTER1); ++ /* enables timer on all the cores */ ++ writel(GT_CONTROL_TIMER_ENABLE, gt_base + GT_CONTROL); ++ ++#ifdef CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK ++ setup_sched_clock(gt_sched_clock_read, 32, gt_clk_rate); ++#endif ++ clocksource_register_hz(>_clocksource, gt_clk_rate); ++} ++ ++static int __cpuinit gt_cpu_notify(struct notifier_block *self, ++ unsigned long action, void *hcpu) ++{ ++ switch (action & ~CPU_TASKS_FROZEN) { ++ case CPU_STARTING: ++ gt_clockevents_init(this_cpu_ptr(gt_evt)); ++ break; ++ case CPU_DYING: ++ gt_clockevents_stop(this_cpu_ptr(gt_evt)); ++ break; ++ } ++ ++ return NOTIFY_OK; ++} ++static struct notifier_block gt_cpu_nb __cpuinitdata = { ++ .notifier_call = gt_cpu_notify, ++}; ++ ++static void __init global_timer_of_register(struct device_node *np) ++{ ++ struct clk *gt_clk; ++ int err = 0; ++ ++ /* ++ * In r2p0 the comparators for each processor with the global timer ++ * fire when the timer value is greater than or equal to. In previous ++ * revisions the comparators fired when the timer value was equal to. ++ */ ++ if ((read_cpuid_id() & 0xf0000f) < 0x200000) { ++ pr_warn("global-timer: non support for this cpu version.\n"); ++ return; ++ } ++ ++ gt_ppi = irq_of_parse_and_map(np, 0); ++ if (!gt_ppi) { ++ pr_warn("global-timer: unable to parse irq\n"); ++ return; ++ } ++ ++ gt_base = of_iomap(np, 0); ++ if (!gt_base) { ++ pr_warn("global-timer: invalid base address\n"); ++ return; ++ } ++ ++ gt_clk = of_clk_get(np, 0); ++ if (!IS_ERR(gt_clk)) { ++ err = clk_prepare_enable(gt_clk); ++ if (err) ++ goto out_unmap; ++ } else { ++ pr_warn("global-timer: clk not found\n"); ++ err = -EINVAL; ++ goto out_unmap; ++ } ++ ++ gt_clk_rate = clk_get_rate(gt_clk); ++ gt_evt = alloc_percpu(struct clock_event_device); ++ if (!gt_evt) { ++ pr_warn("global-timer: can't allocate memory\n"); ++ err = -ENOMEM; ++ goto out_clk; ++ } ++ ++ err = request_percpu_irq(gt_ppi, gt_clockevent_interrupt, ++ "gt", gt_evt); ++ if (err) { ++ pr_warn("global-timer: can't register interrupt %d (%d)\n", ++ gt_ppi, err); ++ goto out_free; ++ } ++ ++ err = register_cpu_notifier(>_cpu_nb); ++ if (err) { ++ pr_warn("global-timer: unable to register cpu notifier.\n"); ++ goto out_irq; ++ } ++ ++ /* Immediately configure the timer on the boot CPU */ ++ gt_clocksource_init(); ++ gt_clockevents_init(this_cpu_ptr(gt_evt)); ++ ++ return; ++ ++out_irq: ++ free_percpu_irq(gt_ppi, gt_evt); ++out_free: ++ free_percpu(gt_evt); ++out_clk: ++ clk_disable_unprepare(gt_clk); ++out_unmap: ++ iounmap(gt_base); ++ WARN(err, "ARM Global timer register failed (%d)\n", err); ++} ++ ++/* Only tested on r2p2 and r3p0 */ ++CLOCKSOURCE_OF_DECLARE(arm_gt, "arm,cortex-a9-global-timer", ++ global_timer_of_register); diff --git a/target/linux/bcm53xx/patches-3.10/0008-bcm53xx-initial-support-for-the-BCM5301-BCM470X-SoC-.patch b/target/linux/bcm53xx/patches-3.10/0008-bcm53xx-initial-support-for-the-BCM5301-BCM470X-SoC-.patch new file mode 100644 index 0000000000..1273f416ed --- /dev/null +++ b/target/linux/bcm53xx/patches-3.10/0008-bcm53xx-initial-support-for-the-BCM5301-BCM470X-SoC-.patch @@ -0,0 +1,307 @@ +From 6c55b7f2fe06eb01f4ca6dad35d54c6e2ecbff25 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens <hauke@hauke-m.de> +Date: Sat, 29 Jun 2013 22:06:43 +0200 +Subject: [PATCH 08/17] bcm53xx: initial support for the BCM5301/BCM470X SoC + with ARM CPU + +This patch adds support for the BCM5301/BCM470X SoCs with an ARM CPU. +Currently just booting to a shell is working and nothing else, no +Ethernet, wifi, flash, ... + +Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> +--- + arch/arm/Kconfig | 2 + + arch/arm/Kconfig.debug | 5 ++ + arch/arm/Makefile | 1 + + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/bcm5301-netgear-r6250.dts | 20 +++++++ + arch/arm/boot/dts/bcm5301.dtsi | 83 +++++++++++++++++++++++++++ + arch/arm/include/debug/bcm53xx.S | 19 ++++++ + arch/arm/mach-bcm53xx/Kconfig | 15 +++++ + arch/arm/mach-bcm53xx/Makefile | 1 + + arch/arm/mach-bcm53xx/bcm53xx.c | 69 ++++++++++++++++++++++ + 10 files changed, 216 insertions(+) + create mode 100644 arch/arm/boot/dts/bcm5301-netgear-r6250.dts + create mode 100644 arch/arm/boot/dts/bcm5301.dtsi + create mode 100644 arch/arm/include/debug/bcm53xx.S + create mode 100644 arch/arm/mach-bcm53xx/Kconfig + create mode 100644 arch/arm/mach-bcm53xx/Makefile + create mode 100644 arch/arm/mach-bcm53xx/bcm53xx.c + +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -922,6 +922,8 @@ source "arch/arm/mach-bcm/Kconfig" + + source "arch/arm/mach-bcm2835/Kconfig" + ++source "arch/arm/mach-bcm53xx/Kconfig" ++ + source "arch/arm/mach-clps711x/Kconfig" + + source "arch/arm/mach-cns3xxx/Kconfig" +--- a/arch/arm/Kconfig.debug ++++ b/arch/arm/Kconfig.debug +@@ -93,6 +93,10 @@ choice + bool "Kernel low-level debugging on BCM2835 PL011 UART" + depends on ARCH_BCM2835 + ++ config DEBUG_BCM53XX ++ bool "Kernel low-level debugging on BCM53XX UART1" ++ depends on ARCH_BCM53XX ++ + config DEBUG_CLPS711X_UART1 + bool "Kernel low-level debugging messages via UART1" + depends on ARCH_CLPS711X +@@ -620,6 +624,7 @@ endchoice + config DEBUG_LL_INCLUDE + string + default "debug/bcm2835.S" if DEBUG_BCM2835 ++ default "debug/bcm53xx.S" if DEBUG_BCM53XX + default "debug/cns3xxx.S" if DEBUG_CNS3XXX + default "debug/exynos.S" if DEBUG_EXYNOS_UART + default "debug/highbank.S" if DEBUG_HIGHBANK_UART +--- a/arch/arm/Makefile ++++ b/arch/arm/Makefile +@@ -145,6 +145,7 @@ textofs-$(CONFIG_ARCH_MSM8960) := 0x0020 + machine-$(CONFIG_ARCH_AT91) += at91 + machine-$(CONFIG_ARCH_BCM) += bcm + machine-$(CONFIG_ARCH_BCM2835) += bcm2835 ++machine-$(CONFIG_ARCH_BCM53XX) += bcm53xx + machine-$(CONFIG_ARCH_CLPS711X) += clps711x + machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx + machine-$(CONFIG_ARCH_DAVINCI) += davinci +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -209,6 +209,7 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07 + wm8650-mid.dtb \ + wm8850-w70v2.dtb + dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb ++dtb-$(CONFIG_ARCH_BCM53XX) += bcm5301-netgear-r6250.dtb + + targets += dtbs + targets += $(dtb-y) +--- /dev/null ++++ b/arch/arm/boot/dts/bcm5301-netgear-r6250.dts +@@ -0,0 +1,20 @@ ++/* ++ * Broadcom BCM47XX / BCM53XX arm platform code. ++ * ++ * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de> ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++/dts-v1/; ++ ++/include/ "bcm5301.dtsi" ++ ++/ { ++ model = "Netgear R6250 V1 (BCM4708)"; ++ compatible = "netgear,r6250v1", "brcm,bcm5301"; ++ ++ memory { ++ reg = <0x00000000 0x08000000>; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/bcm5301.dtsi +@@ -0,0 +1,83 @@ ++/* ++ * Broadcom BCM47XX / BCM53XX ARM platform code. ++ * ++ * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de> ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++/include/ "skeleton.dtsi" ++ ++/ { ++ compatible = "brcm,bcm5301"; ++ model = "BCM5301/BCM4707/BCM4708/BCM4709 SoC"; ++ interrupt-parent = <&gic>; ++ ++ chosen { ++ bootargs = "console=ttyS0,115200 earlyprintk debug vmalloc=64M"; ++ }; ++ ++ cpus { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ cpu@0 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a9"; ++ reg = <0>; ++ }; ++ cpu@1 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a9"; ++ reg = <1>; ++ }; ++ }; ++ ++ clocks { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ clk_periph: periph { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <400000000>; ++ }; ++ }; ++ ++ uart@18000300 { ++ compatible = "ns16550"; ++ reg = <0x18000300 0x100>; ++ interrupts = <0 85 4>; ++ clock-frequency = <100000000>; ++ }; ++ ++ uart@18000400 { ++ compatible = "ns16550"; ++ reg = <0x18000400 0x100>; ++ interrupts = <0 85 4>; ++ clock-frequency = <100000000>; ++ }; ++ ++ gic: interrupt-controller@19021000 { ++ compatible = "arm,cortex-a9-gic"; ++ #interrupt-cells = <3>; ++ #address-cells = <0>; ++ interrupt-controller; ++ reg = <0x19021000 0x1000>, ++ <0x19020100 0x100>; ++ }; ++ ++ timer@19020200 { ++ compatible = "arm,cortex-a9-global-timer"; ++ reg = <0x19020200 0x100>; ++ interrupts = <1 11 0xf04>; ++ clocks = <&clk_periph>; ++ #clock-cells = <0>; ++ }; ++ ++ local-timer@19020200 { ++ compatible = "arm,cortex-a9-twd-timer"; ++ reg = <0x19020600 0x100>; ++ interrupts = <1 13 0xf04>; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/include/debug/bcm53xx.S +@@ -0,0 +1,19 @@ ++/* ++ * Macros used for EARLY_PRINTK, in low-level UART debug console ++ * ++ * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de> ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#define BCM53XX_UART1_PHYS 0x18000300 ++#define BCM53XX_UART1_VIRT 0xf1000300 ++#define BCM53XX_UART1_SH 0 ++ ++ .macro addruart, rp, rv, tmp ++ ldr \rp, =BCM53XX_UART1_PHYS @ MMU off, Physical ++ ldr \rv, =BCM53XX_UART1_VIRT @ MMU on, Virtual ++ .endm ++ ++#define UART_SHIFT BCM53XX_UART1_SH ++#include <asm/hardware/debug-8250.S> +--- /dev/null ++++ b/arch/arm/mach-bcm53xx/Kconfig +@@ -0,0 +1,15 @@ ++config ARCH_BCM53XX ++ bool "Broadcom BCM47XX / BCM53XX ARM SoC" ++ select CPU_V7 ++ select ARM_GIC ++ select HAVE_ARM_SCU if SMP ++ select HAVE_ARM_TWD if LOCAL_TIMERS ++ select HAVE_SMP ++ select HAVE_CLK ++ select LOCAL_TIMERS if SMP ++ select GENERIC_TIME ++ select GENERIC_CLOCKEVENTS_BUILD ++ select GENERIC_CLOCKEVENTS ++ select ARM_GLOBAL_TIMER ++ help ++ Support for Broadcom BCM47XX and BCM53XX SoCs with ARM CPU cores. +--- /dev/null ++++ b/arch/arm/mach-bcm53xx/Makefile +@@ -0,0 +1 @@ ++obj-y += bcm53xx.o +--- /dev/null ++++ b/arch/arm/mach-bcm53xx/bcm53xx.c +@@ -0,0 +1,69 @@ ++/* ++ * Broadcom BCM47XX / BCM53XX ARM platform code. ++ * ++ * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de> ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++#include <linux/of_address.h> ++#include <linux/of_platform.h> ++#include <linux/irqchip.h> ++#include <linux/clocksource.h> ++#include <linux/clk-provider.h> ++ ++#include <asm/mach/arch.h> ++#include <asm/mach/map.h> ++#include <asm/smp_scu.h> ++#include <asm/signal.h> ++ ++static int bcm53xx_abort_handler(unsigned long addr, unsigned int fsr, ++ struct pt_regs *regs) ++{ ++ /* ++ * These happen for no good reason ++ * possibly left over from CFE ++ */ ++ pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n", ++ addr, fsr); ++ ++ /* Returning non-zero causes fault display and panic */ ++ return 0; ++} ++ ++static void bcm53xx_aborts_enable(void) ++{ ++ /* Install our hook */ ++ hook_fault_code(16 + 6, bcm53xx_abort_handler, SIGBUS, 0, ++ "imprecise external abort"); ++} ++ ++static void __init bcm53xx_timer_init(void) ++{ ++ of_clk_init(NULL); ++ clocksource_of_init(); ++} ++ ++void __init bcm53xx_map_io(void) ++{ ++ debug_ll_io_init(); ++ bcm53xx_aborts_enable(); ++} ++ ++static void __init bcm53xx_dt_init(void) ++{ ++ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); ++} ++ ++static const char const *bcm53xx_dt_compat[] = { ++ "brcm,bcm5301", ++ "netgear,r6250v1", ++ NULL, ++}; ++ ++DT_MACHINE_START(BCM53XX, "BCM53XX") ++ .init_machine = bcm53xx_dt_init, ++ .map_io = bcm53xx_map_io, ++ .init_irq = irqchip_init, ++ .init_time = bcm53xx_timer_init, ++ .dt_compat = bcm53xx_dt_compat, ++MACHINE_END diff --git a/target/linux/bcm53xx/patches-3.10/0009-bcma-register-bcma-as-device-tree-driver.patch b/target/linux/bcm53xx/patches-3.10/0009-bcma-register-bcma-as-device-tree-driver.patch new file mode 100644 index 0000000000..ede3af53d1 --- /dev/null +++ b/target/linux/bcm53xx/patches-3.10/0009-bcma-register-bcma-as-device-tree-driver.patch @@ -0,0 +1,99 @@ +From d16de2a4ffeaf62fb3d838365a29b80f330bffe0 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens <hauke@hauke-m.de> +Date: Thu, 4 Jul 2013 22:26:58 +0200 +Subject: [PATCH 09/17] bcma: register bcma as device tree driver + +This driver is used by the bcm53xx ARM SoC code.Now it is possible to +give the address of the chipcommon core in device tree. + +Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> +--- + drivers/bcma/host_soc.c | 73 +++++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 73 insertions(+) + +--- a/drivers/bcma/host_soc.c ++++ b/drivers/bcma/host_soc.c +@@ -7,6 +7,9 @@ + + #include "bcma_private.h" + #include "scan.h" ++#include <linux/slab.h> ++#include <linux/module.h> ++#include <linux/of_address.h> + #include <linux/bcma/bcma.h> + #include <linux/bcma/bcma_soc.h> + +@@ -181,3 +184,73 @@ int __init bcma_host_soc_register(struct + + return err; + } ++ ++#ifdef CONFIG_OF ++static int bcma_host_soc_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct device_node *np = dev->of_node; ++ struct bcma_bus *bus; ++ int err; ++ ++ /* Alloc */ ++ bus = kzalloc(sizeof(*bus), GFP_KERNEL); ++ if (!bus) ++ return -ENOMEM; ++ ++ /* Map MMIO */ ++ err = -ENOMEM; ++ bus->mmio = of_iomap(np, 0); ++ if (!bus->mmio) ++ goto err_kfree_bus; ++ ++ /* Host specific */ ++ bus->hosttype = BCMA_HOSTTYPE_SOC; ++ bus->ops = &bcma_host_soc_ops; ++ ++ ++ /* Register */ ++ err = bcma_bus_register(bus); ++ if (err) ++ goto err_unmap_mmio; ++ ++ platform_set_drvdata(pdev, bus); ++ ++ return err; ++ ++err_unmap_mmio: ++ iounmap(bus->mmio); ++err_kfree_bus: ++ kfree(bus); ++ return err; ++} ++ ++static int bcma_host_soc_remove(struct platform_device *pdev) ++{ ++ struct bcma_bus *bus = platform_get_drvdata(pdev); ++ ++ bcma_bus_unregister(bus); ++ iounmap(bus->mmio); ++ kfree(bus); ++ platform_set_drvdata(pdev, NULL); ++ ++ return 0; ++} ++ ++static const struct of_device_id bcma_host_soc_of_match[] = { ++ { .compatible = "brcm,bus-aix", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, bcma_host_soc_of_match); ++ ++static struct platform_driver bcma_host_soc_driver = { ++ .driver = { ++ .name = "bcma-host-soc", ++ .owner = THIS_MODULE, ++ .of_match_table = bcma_host_soc_of_match, ++ }, ++ .probe = bcma_host_soc_probe, ++ .remove = bcma_host_soc_remove, ++}; ++module_platform_driver(bcma_host_soc_driver); ++#endif /* CONFIG_OF */ diff --git a/target/linux/bcm53xx/patches-3.10/0010-bcma-add-some-more-core-names.patch b/target/linux/bcm53xx/patches-3.10/0010-bcma-add-some-more-core-names.patch new file mode 100644 index 0000000000..aaedd59738 --- /dev/null +++ b/target/linux/bcm53xx/patches-3.10/0010-bcma-add-some-more-core-names.patch @@ -0,0 +1,57 @@ +From 6fe4f63b017c3c0a7caa73d01fab23874ca0ed97 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens <hauke@hauke-m.de> +Date: Thu, 4 Jul 2013 22:29:48 +0200 +Subject: [PATCH 10/17] bcma: add some more core names + +These cores were found on a BCM4708 (chipid 53010), this is a ARM SoC +with two Cortex A9 cores. + +Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> +--- + drivers/bcma/scan.c | 12 ++++++++++++ + include/linux/bcma/bcma.h | 12 ++++++++++++ + 2 files changed, 24 insertions(+) + +--- a/drivers/bcma/scan.c ++++ b/drivers/bcma/scan.c +@@ -32,6 +32,18 @@ static const struct bcma_device_id_name + { BCMA_CORE_4706_CHIPCOMMON, "BCM4706 ChipCommon" }, + { BCMA_CORE_4706_SOC_RAM, "BCM4706 SOC RAM" }, + { BCMA_CORE_4706_MAC_GBIT, "BCM4706 GBit MAC" }, ++ { BCMA_CORE_PCIEG2, "PCIe Gen 2" }, ++ { BCMA_CORE_DMA, "DMA" }, ++ { BCMA_CORE_SDIO3, "SDIO3" }, ++ { BCMA_CORE_USB20, "USB 2.0" }, ++ { BCMA_CORE_USB30, "USB 3.0" }, ++ { BCMA_CORE_A9JTAG, "ARM Cortex A9 JTAG" }, ++ { BCMA_CORE_DDR23, "Denali DDR2/DDR3 memory controller" }, ++ { BCMA_CORE_ROM, "ROM" }, ++ { BCMA_CORE_NAND, "NAND flash controller" }, ++ { BCMA_CORE_QSPI, "SPI flash controller" }, ++ { BCMA_CORE_CHIPCOMMON_B, "Chipcommon B" }, ++ { BCMA_CORE_ARMCA9, "ARM Cortex A9 core (ihost)" }, + { BCMA_CORE_AMEMC, "AMEMC (DDR)" }, + { BCMA_CORE_ALTA, "ALTA (I2S)" }, + { BCMA_CORE_INVALID, "Invalid" }, +--- a/include/linux/bcma/bcma.h ++++ b/include/linux/bcma/bcma.h +@@ -72,7 +72,19 @@ struct bcma_host_ops { + /* Core-ID values. */ + #define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */ + #define BCMA_CORE_4706_CHIPCOMMON 0x500 ++#define BCMA_CORE_PCIEG2 0x501 ++#define BCMA_CORE_DMA 0x502 ++#define BCMA_CORE_SDIO3 0x503 ++#define BCMA_CORE_USB20 0x504 ++#define BCMA_CORE_USB30 0x505 ++#define BCMA_CORE_A9JTAG 0x506 ++#define BCMA_CORE_DDR23 0x507 ++#define BCMA_CORE_ROM 0x508 ++#define BCMA_CORE_NAND 0x509 ++#define BCMA_CORE_QSPI 0x50A ++#define BCMA_CORE_CHIPCOMMON_B 0x50B /* ChipcommonB core */ + #define BCMA_CORE_4706_SOC_RAM 0x50E ++#define BCMA_CORE_ARMCA9 0x510 + #define BCMA_CORE_4706_MAC_GBIT 0x52D + #define BCMA_CORE_AMEMC 0x52E /* DDR1/2 memory controller core */ + #define BCMA_CORE_ALTA 0x534 /* I2S core */ diff --git a/target/linux/bcm53xx/patches-3.10/0011-bcma-make-it-possible-to-select-SoC-support-without-.patch b/target/linux/bcm53xx/patches-3.10/0011-bcma-make-it-possible-to-select-SoC-support-without-.patch new file mode 100644 index 0000000000..08757346b1 --- /dev/null +++ b/target/linux/bcm53xx/patches-3.10/0011-bcma-make-it-possible-to-select-SoC-support-without-.patch @@ -0,0 +1,33 @@ +From b5f4430c100a4d7b526426db46b76add728f45d4 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens <hauke@hauke-m.de> +Date: Thu, 4 Jul 2013 22:35:22 +0200 +Subject: [PATCH 11/17] bcma: make it possible to select SoC support without + mips + +To make it possible to use the SoC host interface with ARM SoCs do not +depend on the MIPS driver any more. + +Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> +--- + drivers/bcma/Kconfig | 10 ++++++++-- + 1 file changed, 8 insertions(+), 2 deletions(-) + +--- a/drivers/bcma/Kconfig ++++ b/drivers/bcma/Kconfig +@@ -35,8 +35,14 @@ config BCMA_DRIVER_PCI_HOSTMODE + PCI core hostmode operation (external PCI bus). + + config BCMA_HOST_SOC +- bool +- depends on BCMA_DRIVER_MIPS ++ bool "Support for BCMA in a SoC" ++ depends on BCMA ++ help ++ Host interface for a Broadcom AIX bus directly mapped into ++ the memory. This only works with the Broadcom SoCs from the ++ BCM47XX line. ++ ++ If unsure, say N + + config BCMA_DRIVER_MIPS + bool "BCMA Broadcom MIPS core driver" diff --git a/target/linux/bcm53xx/patches-3.10/0012-bcm53xx-register-bcma-bus.patch b/target/linux/bcm53xx/patches-3.10/0012-bcm53xx-register-bcma-bus.patch new file mode 100644 index 0000000000..5e18b871e8 --- /dev/null +++ b/target/linux/bcm53xx/patches-3.10/0012-bcm53xx-register-bcma-bus.patch @@ -0,0 +1,24 @@ +From 5b9be5e1e3c368466e482c7dbb2cf6b890614b39 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens <hauke@hauke-m.de> +Date: Thu, 4 Jul 2013 22:37:13 +0200 +Subject: [PATCH 12/17] bcm53xx: register bcma bus + +Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> +--- + arch/arm/boot/dts/bcm5301.dtsi | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/arch/arm/boot/dts/bcm5301.dtsi ++++ b/arch/arm/boot/dts/bcm5301.dtsi +@@ -67,6 +67,11 @@ + <0x19020100 0x100>; + }; + ++ bus@18000000 { ++ compatible = "brcm,bus-aix"; ++ reg = <0x18000000 0x1000>; ++ }; ++ + timer@19020200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x19020200 0x100>; diff --git a/target/linux/bcm53xx/patches-3.10/0013-bcma-add-constants-for-new-ARM-based-SoCs.patch b/target/linux/bcm53xx/patches-3.10/0013-bcma-add-constants-for-new-ARM-based-SoCs.patch new file mode 100644 index 0000000000..10c1c40474 --- /dev/null +++ b/target/linux/bcm53xx/patches-3.10/0013-bcma-add-constants-for-new-ARM-based-SoCs.patch @@ -0,0 +1,26 @@ +From fda36440e95ef9adbd7955b069248d1d807a85b1 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens <hauke@hauke-m.de> +Date: Thu, 4 Jul 2013 22:48:25 +0200 +Subject: [PATCH 13/17] bcma: add constants for new ARM based SoCs + +These are the chipIDs of some ARM based SoCs from the BCM47xx line. + +Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> +--- + include/linux/bcma/bcma.h | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/include/linux/bcma/bcma.h ++++ b/include/linux/bcma/bcma.h +@@ -188,6 +188,11 @@ struct bcma_host_ops { + #define BCMA_PKG_ID_BCM5357 11 + #define BCMA_CHIP_ID_BCM53572 53572 + #define BCMA_PKG_ID_BCM47188 9 ++#define BCMA_CHIP_ID_BCM4707 53010 ++#define BCMA_PKG_ID_BCM4707 1 ++#define BCMA_PKG_ID_BCM4708 2 ++#define BCMA_PKG_ID_BCM4709 0 ++#define BCMA_CHIP_ID_BCM53018 53018 + + /* Board types (on PCI usually equals to the subsystem dev id) */ + /* BCM4313 */ diff --git a/target/linux/bcm53xx/patches-3.10/0014-bcma-return-correct-error-code-when-bus-can-failed.patch b/target/linux/bcm53xx/patches-3.10/0014-bcma-return-correct-error-code-when-bus-can-failed.patch new file mode 100644 index 0000000000..04af9d4570 --- /dev/null +++ b/target/linux/bcm53xx/patches-3.10/0014-bcma-return-correct-error-code-when-bus-can-failed.patch @@ -0,0 +1,21 @@ +From e2e1b185afd86a047e1f2db405c61ae4e43c0f29 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens <hauke@hauke-m.de> +Date: Thu, 4 Jul 2013 22:49:14 +0200 +Subject: [PATCH 14/17] bcma: return correct error code when bus can failed + +Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> +--- + drivers/bcma/main.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/bcma/main.c ++++ b/drivers/bcma/main.c +@@ -218,7 +218,7 @@ int bcma_bus_register(struct bcma_bus *b + err = bcma_bus_scan(bus); + if (err) { + bcma_err(bus, "Failed to scan: %d\n", err); +- return -1; ++ return err; + } + + /* Early init CC core */ diff --git a/target/linux/bcm53xx/patches-3.10/0015-bcma-fix-handling-of-big-addrl.patch b/target/linux/bcm53xx/patches-3.10/0015-bcma-fix-handling-of-big-addrl.patch new file mode 100644 index 0000000000..6a76f5d716 --- /dev/null +++ b/target/linux/bcm53xx/patches-3.10/0015-bcma-fix-handling-of-big-addrl.patch @@ -0,0 +1,83 @@ +From 8204277ed0f4aeb7bb38d0d5f39d9ebcced92576 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens <hauke@hauke-m.de> +Date: Fri, 5 Jul 2013 00:24:38 +0200 +Subject: [PATCH 15/17] bcma: fix handling of big addrl + +The return value of bcma_erom_get_addr_desc() is a unsigned value and it +could wrap around in the two complement writing. + +Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> +--- + drivers/bcma/scan.c | 16 ++++++++-------- + 1 file changed, 8 insertions(+), 8 deletions(-) + +--- a/drivers/bcma/scan.c ++++ b/drivers/bcma/scan.c +@@ -213,7 +213,7 @@ static s32 bcma_erom_get_mst_port(struct + return ent; + } + +-static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr, ++static u32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr, + u32 type, u8 port) + { + u32 addrl, addrh, sizel, sizeh = 0; +@@ -225,7 +225,7 @@ static s32 bcma_erom_get_addr_desc(struc + ((ent & SCAN_ADDR_TYPE) != type) || + (((ent & SCAN_ADDR_PORT) >> SCAN_ADDR_PORT_SHIFT) != port)) { + bcma_erom_push_ent(eromptr); +- return -EINVAL; ++ return (u32)-EINVAL; + } + + addrl = ent & SCAN_ADDR_ADDR; +@@ -273,7 +273,7 @@ static int bcma_get_next_core(struct bcm + struct bcma_device_id *match, int core_num, + struct bcma_device *core) + { +- s32 tmp; ++ u32 tmp; + u8 i, j; + s32 cia, cib; + u8 ports[2], wrappers[2]; +@@ -351,11 +351,11 @@ static int bcma_get_next_core(struct bcm + * the main register space for the core + */ + tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_SLAVE, 0); +- if (tmp <= 0) { ++ if (tmp == 0 || IS_ERR_VALUE(tmp)) { + /* Try again to see if it is a bridge */ + tmp = bcma_erom_get_addr_desc(bus, eromptr, + SCAN_ADDR_TYPE_BRIDGE, 0); +- if (tmp <= 0) { ++ if (tmp == 0 || IS_ERR_VALUE(tmp)) { + return -EILSEQ; + } else { + bcma_info(bus, "Bridge found\n"); +@@ -369,7 +369,7 @@ static int bcma_get_next_core(struct bcm + for (j = 0; ; j++) { + tmp = bcma_erom_get_addr_desc(bus, eromptr, + SCAN_ADDR_TYPE_SLAVE, i); +- if (tmp < 0) { ++ if (IS_ERR_VALUE(tmp)) { + /* no more entries for port _i_ */ + /* pr_debug("erom: slave port %d " + * "has %d descriptors\n", i, j); */ +@@ -386,7 +386,7 @@ static int bcma_get_next_core(struct bcm + for (j = 0; ; j++) { + tmp = bcma_erom_get_addr_desc(bus, eromptr, + SCAN_ADDR_TYPE_MWRAP, i); +- if (tmp < 0) { ++ if (IS_ERR_VALUE(tmp)) { + /* no more entries for port _i_ */ + /* pr_debug("erom: master wrapper %d " + * "has %d descriptors\n", i, j); */ +@@ -404,7 +404,7 @@ static int bcma_get_next_core(struct bcm + for (j = 0; ; j++) { + tmp = bcma_erom_get_addr_desc(bus, eromptr, + SCAN_ADDR_TYPE_SWRAP, i + hack); +- if (tmp < 0) { ++ if (IS_ERR_VALUE(tmp)) { + /* no more entries for port _i_ */ + /* pr_debug("erom: master wrapper %d " + * has %d descriptors\n", i, j); */ diff --git a/target/linux/bcm53xx/patches-3.10/0016-bgmac-bgmac-depends-on-phylib.patch b/target/linux/bcm53xx/patches-3.10/0016-bgmac-bgmac-depends-on-phylib.patch new file mode 100644 index 0000000000..5c79720dff --- /dev/null +++ b/target/linux/bcm53xx/patches-3.10/0016-bgmac-bgmac-depends-on-phylib.patch @@ -0,0 +1,22 @@ +From 0cf467765b64f6dc60f95c890cdb1641ae1d9390 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens <hauke@hauke-m.de> +Date: Wed, 10 Jul 2013 17:54:33 +0200 +Subject: [PATCH 16/17] bgmac: bgmac depends on phylib + +bgmac is using functions from phylib, add the dependency. + +Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> +--- + drivers/net/ethernet/broadcom/Kconfig | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/net/ethernet/broadcom/Kconfig ++++ b/drivers/net/ethernet/broadcom/Kconfig +@@ -133,6 +133,7 @@ config BNX2X_SRIOV + config BGMAC + tristate "BCMA bus GBit core support" + depends on BCMA_HOST_SOC && HAS_DMA ++ select PHYLIB + ---help--- + This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus. + They can be found on BCM47xx SoCs and provide gigabit ethernet. diff --git a/target/linux/bcm53xx/patches-3.10/0017-bgmac-make-bgmac-work-on-systems-without-nvram.patch b/target/linux/bcm53xx/patches-3.10/0017-bgmac-make-bgmac-work-on-systems-without-nvram.patch new file mode 100644 index 0000000000..33ff0ef715 --- /dev/null +++ b/target/linux/bcm53xx/patches-3.10/0017-bgmac-make-bgmac-work-on-systems-without-nvram.patch @@ -0,0 +1,25 @@ +From a0c7d2569ed39b8b0d90a431d80babc0f5f1f864 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens <hauke@hauke-m.de> +Date: Wed, 10 Jul 2013 17:55:34 +0200 +Subject: [PATCH 17/17] bgmac: make bgmac work on systems without nvram + + +Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> +--- + drivers/net/ethernet/broadcom/bgmac.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/net/ethernet/broadcom/bgmac.c ++++ b/drivers/net/ethernet/broadcom/bgmac.c +@@ -16,7 +16,11 @@ + #include <linux/phy.h> + #include <linux/interrupt.h> + #include <linux/dma-mapping.h> ++#ifdef CONFIG_BCM47XX + #include <bcm47xx_nvram.h> ++#else ++#define bcm47xx_nvram_getenv(a, b, c) -1 ++#endif + + static const struct bcma_device_id bgmac_bcma_tbl[] = { + BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_4706_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS), diff --git a/target/linux/bcm53xx/profiles/100-Generic.mk b/target/linux/bcm53xx/profiles/100-Generic.mk new file mode 100644 index 0000000000..5e6d1ce85d --- /dev/null +++ b/target/linux/bcm53xx/profiles/100-Generic.mk @@ -0,0 +1,18 @@ +# +# Copyright (C) 2013 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/Generic + NAME:=Broadcom SoC, BCM43xx WiFi (b43, default) +endef + +define Profile/Generic/Description + Package set compatible with hardware any Broadcom BCM47xx or BCM535x + SoC with a ARM CPU like the BCM4707, BCM4708, BCM4709, BCM53010 +endef + +$(eval $(call Profile,Generic)) + |