kernel: update 4.4 to 4.4.88

Refresh patches.
Compile & run tested: ar71xx  Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>

3 files changed, 22 insertions, 22 deletions

diff --git a/include/kernel-version.mk b/include/kernel-version.mk
index 25ef3d6c4f..0fd915adc2 100644
--- a/include/kernel-version.mk
+++ b/include/kernel-version.mk
@@ -3,11 +3,11 @@
 LINUX_RELEASE?=1
 
 LINUX_VERSION-3.18 = .43
-LINUX_VERSION-4.4 = .87
+LINUX_VERSION-4.4 = .88
 LINUX_VERSION-4.9 = .49
 
 LINUX_KERNEL_HASH-3.18.43 = 1236e8123a6ce537d5029232560966feed054ae31776fe8481dd7d18cdd5492c
-LINUX_KERNEL_HASH-4.4.87 = 1ab05222c3c55e062c3f7418976137ee529f92174261ccb0cd5a7d3370ff6f5b
+LINUX_KERNEL_HASH-4.4.88 = 144fe8dd773ec317fa06109b8d7bd04141bf1941daa03799fb4f437bbbb919b4
 LINUX_KERNEL_HASH-4.9.49 = 57ecdcf180b56356b2e15264ca567a8fcd9eec993fc70286bec3bd0005e791fb
 
 ifdef KERNEL_PATCHVER
diff --git a/target/linux/generic/pending-4.4/002-phy_drivers_backport.patch b/target/linux/generic/pending-4.4/002-phy_drivers_backport.patch
index 72e13dcf8b..5d83aa3bb1 100644
--- a/target/linux/generic/pending-4.4/002-phy_drivers_backport.patch
+++ b/target/linux/generic/pending-4.4/002-phy_drivers_backport.patch
@@ -86,7 +86,7 @@
  
 --- a/drivers/net/phy/ar8216.c
 +++ b/drivers/net/phy/ar8216.c
-@@ -183,7 +183,7 @@ ar8xxx_phy_check_aneg(struct phy_device
+@@ -177,7 +177,7 @@ ar8xxx_phy_check_aneg(struct phy_device
  	if (ret & BMCR_ANENABLE)
  		return 0;
  
@@ -95,7 +95,7 @@
  	ret |= BMCR_ANENABLE | BMCR_ANRESTART;
  	return phy_write(phydev, MII_BMCR, ret);
  }
-@@ -2054,7 +2054,7 @@ ar8xxx_phy_config_init(struct phy_device
+@@ -2007,7 +2007,7 @@ ar8xxx_phy_config_init(struct phy_device
  
  	priv->phy = phydev;
  
@@ -104,7 +104,7 @@
  		if (chip_is_ar8316(priv)) {
  			/* switch device has been initialized, reinit */
  			priv->dev.ports = (AR8216_NUM_PORTS - 1);
-@@ -2102,7 +2102,7 @@ ar8xxx_check_link_states(struct ar8xxx_p
+@@ -2055,7 +2055,7 @@ ar8xxx_check_link_states(struct ar8xxx_p
  		/* flush ARL entries for this port if it went down*/
  		if (!link_new)
  			priv->chip->atu_flush_port(priv, i);
@@ -113,7 +113,7 @@
  			 i, link_new ? "up" : "down");
  	}
  
-@@ -2121,10 +2121,10 @@ ar8xxx_phy_read_status(struct phy_device
+@@ -2074,10 +2074,10 @@ ar8xxx_phy_read_status(struct phy_device
  	if (phydev->state == PHY_CHANGELINK)
  		ar8xxx_check_link_states(priv);
  
@@ -126,7 +126,7 @@
  	phydev->link = !!link.link;
  	if (!phydev->link)
  		return 0;
-@@ -2154,7 +2154,7 @@ ar8xxx_phy_read_status(struct phy_device
+@@ -2107,7 +2107,7 @@ ar8xxx_phy_read_status(struct phy_device
  static int
  ar8xxx_phy_config_aneg(struct phy_device *phydev)
  {
@@ -135,7 +135,7 @@
  		return 0;
  
  	return genphy_config_aneg(phydev);
-@@ -2209,15 +2209,15 @@ ar8xxx_phy_probe(struct phy_device *phyd
+@@ -2162,15 +2162,15 @@ ar8xxx_phy_probe(struct phy_device *phyd
  	int ret;
  
  	/* skip PHYs at unused adresses */
@@ -154,7 +154,7 @@
  			goto found;
  
  	priv = ar8xxx_create();
-@@ -2226,7 +2226,7 @@ ar8xxx_phy_probe(struct phy_device *phyd
+@@ -2179,7 +2179,7 @@ ar8xxx_phy_probe(struct phy_device *phyd
  		goto unlock;
  	}
  
@@ -163,7 +163,7 @@
  
  	ret = ar8xxx_probe_switch(priv);
  	if (ret)
-@@ -2247,7 +2247,7 @@ ar8xxx_phy_probe(struct phy_device *phyd
+@@ -2200,7 +2200,7 @@ ar8xxx_phy_probe(struct phy_device *phyd
  found:
  	priv->use_count++;
  
@@ -172,7 +172,7 @@
  		if (ar8xxx_has_gige(priv)) {
  			phydev->supported = SUPPORTED_1000baseT_Full;
  			phydev->advertising = ADVERTISED_1000baseT_Full;
-@@ -2335,21 +2335,33 @@ ar8xxx_phy_soft_reset(struct phy_device
+@@ -2288,21 +2288,33 @@ ar8xxx_phy_soft_reset(struct phy_device
  	return 0;
  }
  
@@ -464,7 +464,7 @@
  module_init(psb6970_init);
 --- a/drivers/net/phy/rtl8306.c
 +++ b/drivers/net/phy/rtl8306.c
-@@ -872,7 +872,7 @@ rtl8306_config_init(struct phy_device *p
+@@ -876,7 +876,7 @@ rtl8306_config_init(struct phy_device *p
  	int err;
  
  	/* Only init the switch for the primary PHY */
@@ -473,7 +473,7 @@
  		return 0;
  
  	val.value.i = 1;
-@@ -882,7 +882,7 @@ rtl8306_config_init(struct phy_device *p
+@@ -886,7 +886,7 @@ rtl8306_config_init(struct phy_device *p
  	priv->dev.ops = &rtl8306_ops;
  	priv->do_cpu = 0;
  	priv->page = -1;
@@ -482,7 +482,7 @@
  
  	chipid = rtl_get(dev, RTL_REG_CHIPID);
  	chipver = rtl_get(dev, RTL_REG_CHIPVER);
-@@ -928,13 +928,13 @@ rtl8306_fixup(struct phy_device *pdev)
+@@ -932,13 +932,13 @@ rtl8306_fixup(struct phy_device *pdev)
  	u16 chipid;
  
  	/* Attach to primary LAN port and WAN port */
@@ -498,7 +498,7 @@
  	chipid = rtl_get(&priv.dev, RTL_REG_CHIPID);
  	if (chipid == 0x5988)
  		pdev->phy_id = RTL8306_MAGIC;
-@@ -952,14 +952,14 @@ rtl8306_probe(struct phy_device *pdev)
+@@ -956,14 +956,14 @@ rtl8306_probe(struct phy_device *pdev)
  		 * share one rtl_priv instance between virtual phy
  		 * devices on the same bus
  		 */
@@ -515,7 +515,7 @@
  
  found:
  	pdev->priv = priv;
-@@ -980,7 +980,7 @@ rtl8306_config_aneg(struct phy_device *p
+@@ -984,7 +984,7 @@ rtl8306_config_aneg(struct phy_device *p
  	struct rtl_priv *priv = pdev->priv;
  
  	/* Only for WAN */
@@ -524,7 +524,7 @@
  		return 0;
  
  	/* Restart autonegotiation */
-@@ -996,7 +996,7 @@ rtl8306_read_status(struct phy_device *p
+@@ -1000,7 +1000,7 @@ rtl8306_read_status(struct phy_device *p
  	struct rtl_priv *priv = pdev->priv;
  	struct switch_dev *dev = &priv->dev;
  
@@ -533,7 +533,7 @@
  		/* WAN */
  		pdev->speed = rtl_get(dev, RTL_PORT_REG(4, SPEED)) ? SPEED_100 : SPEED_10;
  		pdev->duplex = rtl_get(dev, RTL_PORT_REG(4, DUPLEX)) ? DUPLEX_FULL : DUPLEX_HALF;
-@@ -1037,6 +1037,7 @@ static struct phy_driver rtl8306_driver
+@@ -1041,6 +1041,7 @@ static struct phy_driver rtl8306_driver
  	.config_init	= &rtl8306_config_init,
  	.config_aneg	= &rtl8306_config_aneg,
  	.read_status	= &rtl8306_read_status,
@@ -541,7 +541,7 @@
  };
  
  
-@@ -1044,7 +1045,7 @@ static int __init
+@@ -1048,7 +1049,7 @@ static int __init
  rtl_init(void)
  {
  	phy_register_fixup_for_id(PHY_ANY_ID, rtl8306_fixup);
diff --git a/target/linux/generic/pending-4.4/811-pci_disable_usb_common_quirks.patch b/target/linux/generic/pending-4.4/811-pci_disable_usb_common_quirks.patch
index c990681067..702c9fa2b5 100644
--- a/target/linux/generic/pending-4.4/811-pci_disable_usb_common_quirks.patch
+++ b/target/linux/generic/pending-4.4/811-pci_disable_usb_common_quirks.patch
@@ -10,7 +10,7 @@
  static struct amd_chipset_info {
  	struct pci_dev	*nb_dev;
  	struct pci_dev	*smbus_dev;
-@@ -457,6 +459,10 @@ void usb_amd_dev_put(void)
+@@ -458,6 +460,10 @@ void usb_amd_dev_put(void)
  }
  EXPORT_SYMBOL_GPL(usb_amd_dev_put);
  
@@ -21,7 +21,7 @@
  /*
   * Make sure the controller is completely inactive, unable to
   * generate interrupts or do DMA.
-@@ -536,8 +542,17 @@ reset_needed:
+@@ -537,8 +543,17 @@ reset_needed:
  	uhci_reset_hc(pdev, base);
  	return 1;
  }
@@ -39,7 +39,7 @@
  static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
  {
  	u16 cmd;
-@@ -1102,3 +1117,4 @@ static void quirk_usb_early_handoff(stru
+@@ -1103,3 +1118,4 @@ static void quirk_usb_early_handoff(stru
  }
  DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
  			PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff);