ramips: revert 1d5afc012e9d3eef0b113e1a89cff7508b731f90

the submitted patch was bogus

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42994

1 files changed, 0 insertions, 319 deletions

diff --git a/0001-ramips-add-support-for-Nexx-WT3020-devices.patch b/0001-ramips-add-support-for-Nexx-WT3020-devices.patch
deleted file mode 100644
index a67b275473..0000000000
--- a/0001-ramips-add-support-for-Nexx-WT3020-devices.patch
+++ /dev/null
@@ -1,319 +0,0 @@
-From fceb829eca2bc088ad66b18099b57dc96f1bae43 Mon Sep 17 00:00:00 2001
-From: Roger Pueyo Centelles <roger.pueyo@guifi.net>
-Date: Sun, 19 Oct 2014 17:50:01 +0200
-Subject: [PATCH] ramips: add support for Nexx WT3020 devices
-
----
- target/linux/ramips/base-files/etc/board.d/01_leds |   3 +
- .../linux/ramips/base-files/etc/board.d/02_network |   1 +
- target/linux/ramips/base-files/etc/diag.sh         |   3 +
- target/linux/ramips/base-files/lib/ramips.sh       |   3 +
- .../ramips/base-files/lib/upgrade/platform.sh      |   1 +
- target/linux/ramips/dts/WT3020-4M.dts              | 100 +++++++++++++++++++++
- target/linux/ramips/dts/WT3020-8M.dts              | 100 +++++++++++++++++++++
- target/linux/ramips/image/Makefile                 |   2 +
- 8 files changed, 213 insertions(+)
- create mode 100644 target/linux/ramips/dts/WT3020-4M.dts
- create mode 100644 target/linux/ramips/dts/WT3020-8M.dts
-
-diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
-index 26f384d..7ca7ffb 100755
---- a/target/linux/ramips/base-files/etc/board.d/01_leds
-+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
-@@ -213,6 +213,9 @@ case $board in
- 	wt1520)
- 		set_wifi_led "rt2800pci-phy0::radio"
- 		;;
-+	wt3020)
-+		ucidef_set_led_default "power" "power" "nexx:blue:power" "0"
-+		;;
- 	y1 |\
- 	y1s)
- 		ucidef_set_led_default "power" "power" "lenovo:blue:power" "1"
-diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
-index 7ecec5f..ff8fbc0 100755
---- a/target/linux/ramips/base-files/etc/board.d/02_network
-+++ b/target/linux/ramips/base-files/etc/board.d/02_network
-@@ -127,6 +127,7 @@ ramips_setup_interfaces()
- 	hg255d | \
- 	rt-n14u | \
- 	wrtnode | \
-+	wt3020 | \
- 	ur-326n4g | \
- 	zbt-wa05)
- 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
-index aed7d6a..2977099 100755
---- a/target/linux/ramips/base-files/etc/diag.sh
-+++ b/target/linux/ramips/base-files/etc/diag.sh
-@@ -170,6 +170,9 @@ get_status_led() {
- 	nexx-wt1520)
- 		status_led="nexx-wt1520:white:power"
- 		;;
-+	nexx-wt3020)
-+		status_led="nexx:blue:power"
-+		;;
- 	mzk-w300nh2)
- 		status_led="mzkw300nh2:green:power"
- 		;;
-diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
-index 08c5dff..88fa623 100755
---- a/target/linux/ramips/base-files/lib/ramips.sh
-+++ b/target/linux/ramips/base-files/lib/ramips.sh
-@@ -184,6 +184,9 @@ ramips_board_detect() {
- 	*"Nexx WT1520")
- 		name="wt1520"
- 		;;
-+	*"Nexx WT3020")
-+		name="wt3020"
-+		;;
- 	*"NW718")
- 		name="nw718"
- 		;;
-diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
-index 61a0935..c9a418e 100755
---- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
-+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
-@@ -97,6 +97,7 @@ platform_check_image() {
- 	wr8305rt |\
- 	wrtnode |\
- 	wt1520 |\
-+	wt3020 |\
- 	x5 |\
- 	x8 |\
- 	y1 |\
-diff --git a/target/linux/ramips/dts/WT3020-4M.dts b/target/linux/ramips/dts/WT3020-4M.dts
-new file mode 100644
-index 0000000..7583680
---- /dev/null
-+++ b/target/linux/ramips/dts/WT3020-4M.dts
-@@ -0,0 +1,100 @@
-+/dts-v1/;
-+
-+/include/ "mt7620n.dtsi"
-+
-+/ {
-+	compatible = "wt3020", "ralink,mt7620n-soc";
-+	model = "Nexx WT3020";
-+
-+	palmbus@10000000 {
-+                gpio2: gpio@660 {
-+                        status = "okay";
-+                };
-+
-+                gpio3: gpio@688 {
-+                        status = "okay";
-+                };
-+
-+		spi@b00 {
-+			status = "okay";
-+
-+			m25p80@0 {
-+				#address-cells = <1>;
-+				#size-cells = <1>;
-+				compatible = "w25q32";
-+				reg = <0 0>;
-+				linux,modalias = "m25p80", "w25q32";
-+				spi-max-frequency = <10000000>;
-+
-+				partition@0 {
-+					label = "u-boot";
-+					reg = <0x0 0x30000>;
-+					read-only;
-+				};
-+
-+				partition@30000 {
-+					label = "u-boot-env";
-+					reg = <0x30000 0x10000>;
-+					read-only;
-+				};
-+
-+				factory: partition@40000 {
-+					label = "factory";
-+					reg = <0x40000 0x10000>;
-+					read-only;
-+				};
-+
-+				partition@50000 {
-+					label = "firmware";
-+					reg = <0x50000 0x3b0000>;
-+				};
-+			};
-+		};
-+	};
-+
-+	ehci@101c0000 {
-+		status = "okay";
-+	};
-+
-+	ohci@101c1000 {
-+		status = "okay";
-+	};
-+
-+	ethernet@10100000 {
-+		mtd-mac-address = <&factory 0x4>;
-+		ralink,port-map = "wllll";
-+	};
-+
-+	wmac@10180000 {
-+		ralink,mtd-eeprom = <&factory 0>;
-+	};
-+
-+	pinctrl {
-+		state_default: pinctrl0 {
-+			default {
-+				ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
-+				ralink,function = "gpio";
-+			};
-+		};
-+	};
-+
-+	gpio-keys-polled {
-+		compatible = "gpio-keys-polled";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		poll-interval = <20>;
-+		reset {
-+			label = "reset";
-+			gpios = <&gpio0 1 1>;
-+			linux,code = <0x198>;
-+		};
-+	};
-+
-+        gpio-leds {
-+                compatible = "gpio-leds";
-+                power {
-+                        label = "nexx:blue:power";
-+                        gpios = <&gpio3 0 0>;
-+                };
-+        };
-+};
-diff --git a/target/linux/ramips/dts/WT3020-8M.dts b/target/linux/ramips/dts/WT3020-8M.dts
-new file mode 100644
-index 0000000..5fa7c92
---- /dev/null
-+++ b/target/linux/ramips/dts/WT3020-8M.dts
-@@ -0,0 +1,100 @@
-+/dts-v1/;
-+
-+/include/ "mt7620n.dtsi"
-+
-+/ {
-+	compatible = "wt3020", "ralink,mt7620n-soc";
-+	model = "Nexx WT3020";
-+
-+	palmbus@10000000 {
-+                gpio2: gpio@660 {
-+                        status = "okay";
-+                };
-+
-+                gpio3: gpio@688 {
-+                        status = "okay";
-+                };
-+
-+		spi@b00 {
-+			status = "okay";
-+
-+			m25p80@0 {
-+				#address-cells = <1>;
-+				#size-cells = <1>;
-+				compatible = "w25q64";
-+				reg = <0 0>;
-+				linux,modalias = "m25p80", "w25q64";
-+				spi-max-frequency = <10000000>;
-+
-+				partition@0 {
-+					label = "u-boot";
-+					reg = <0x0 0x30000>;
-+					read-only;
-+				};
-+
-+				partition@30000 {
-+					label = "u-boot-env";
-+					reg = <0x30000 0x10000>;
-+					read-only;
-+				};
-+
-+				factory: partition@40000 {
-+					label = "factory";
-+					reg = <0x40000 0x10000>;
-+					read-only;
-+				};
-+
-+				partition@50000 {
-+					label = "firmware";
-+					reg = <0x50000 0x7b0000>;
-+				};
-+			};
-+		};
-+	};
-+
-+	ehci@101c0000 {
-+		status = "okay";
-+	};
-+
-+	ohci@101c1000 {
-+		status = "okay";
-+	};
-+
-+	ethernet@10100000 {
-+		mtd-mac-address = <&factory 0x4>;
-+		ralink,port-map = "wllll";
-+	};
-+
-+	wmac@10180000 {
-+		ralink,mtd-eeprom = <&factory 0>;
-+	};
-+
-+	pinctrl {
-+		state_default: pinctrl0 {
-+			default {
-+				ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
-+				ralink,function = "gpio";
-+			};
-+		};
-+	};
-+
-+	gpio-keys-polled {
-+		compatible = "gpio-keys-polled";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		poll-interval = <20>;
-+		reset {
-+			label = "reset";
-+			gpios = <&gpio0 1 1>;
-+			linux,code = <0x198>;
-+		};
-+	};
-+
-+        gpio-leds {
-+                compatible = "gpio-leds";
-+                power {
-+                        label = "nexx:blue:power";
-+                        gpios = <&gpio3 0 0>;
-+                };
-+        };
-+};
-diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
-index f048caf..a93b82c 100644
---- a/target/linux/ramips/image/Makefile
-+++ b/target/linux/ramips/image/Makefile
-@@ -769,6 +769,7 @@ Image/Build/Profile/WMR300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR3
- Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U)
- Image/Build/Profile/WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),wr8305rt,WR8305RT)
- Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE)
-+Image/Build/Profile/WT3020=$(call BuildFirmware/DefaultDualSize/$(1),$(1),wt3020,WT3020)
- Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
- 
- ifeq ($(SUBTARGET),mt7620n)
-@@ -778,6 +779,7 @@ define Image/Build/Profile/Default
- 	$(call Image/Build/Profile/RT-N14U,$(1))
- 	$(call Image/Build/Profile/WR8305RT,$(1))
- 	$(call Image/Build/Profile/WRTNODE,$(1))
-+	$(call Image/Build/Profile/WT3020,$(1))
- 	$(call Image/Build/Profile/ZBT-WA05,$(1))
- endef
- endif
--- 
-2.1.1
-