aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorImre Kaloz <kaloz@openwrt.org>2015-05-03 18:00:47 +0000
committerImre Kaloz <kaloz@openwrt.org>2015-05-03 18:00:47 +0000
commit3ee45e61fe7ad6b8536d671aea077501ed150720 (patch)
treead6e657a3fa2446a88e9048b32603177182badda
parent322d798510e5f5f657aa984644f82f9834d3a72c (diff)
downloadupstream-3ee45e61fe7ad6b8536d671aea077501ed150720.tar.gz
upstream-3ee45e61fe7ad6b8536d671aea077501ed150720.tar.bz2
upstream-3ee45e61fe7ad6b8536d671aea077501ed150720.zip
mpc85xx: replace WDR4900 uci-defaults ethernet MAC address hack with DTS entry
This also changes the MAC address to one of the adresses actually used by the stock firmware on one of the ethernet interfaces. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 45599
-rw-r--r--target/linux/mpc85xx/base-files/etc/uci-defaults/02_network2
-rw-r--r--target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts3
2 files changed, 2 insertions, 3 deletions
diff --git a/target/linux/mpc85xx/base-files/etc/uci-defaults/02_network b/target/linux/mpc85xx/base-files/etc/uci-defaults/02_network
index e4e3566c9d..525a552a73 100644
--- a/target/linux/mpc85xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/mpc85xx/base-files/etc/uci-defaults/02_network
@@ -20,8 +20,6 @@ tl-wdr4900-v1)
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
ucidef_add_switch_vlan "switch0" "2" "0t 1"
- ucidef_set_interface_macaddr lan "$(mtd_get_mac_binary config 338)"
- ucidef_set_interface_macaddr wan "$(mtd_get_mac_binary config 344)"
;;
*)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts
index 49e516c16f..7e48e23e4f 100644
--- a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts
+++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts
@@ -63,7 +63,7 @@
label = "rootfs";
};
- config@fe0000 {
+ config: config@fe0000 {
reg = <0x00fe0000 0x00010000>;
label = "config";
read-only;
@@ -118,6 +118,7 @@
enet0: ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
+ mtd-mac-address = <&config 0x14c>;
};
enet1: ethernet@b1000 {