From 77fee227b15835d03517dc34675f72e8963ae882 Mon Sep 17 00:00:00 2001 From: Cyrille Pitchen Date: Fri, 8 Jan 2016 17:02:21 +0100 Subject: [PATCH 24/33] mtd: spi-nor: configure the number of dummy clock cycles on Micron memories The spi-nor framework currently expects all Fast Read operations to use 8 dummy clock cycles. Especially some drivers like m25p80 can only support multiple of 8 dummy clock cycles. On Micron memories, the number of dummy clock cycles to be used by Fast Read commands can be safely set to 8 by updating the Volatile Configuration Register (VCR). Also the XIP bit is set at the same time when updating the VCR so the Continuous Read mode is disabled: this prevents us from entering it by mistake. Signed-off-by: Cyrille Pitchen --- drivers/mtd/spi-nor/spi-nor.c | 72 ++++++++++++++++++++++++++++++++++++++----- include/linux/mtd/spi-nor.h | 2 ++ 2 files changed, 67 insertions(+), 7 deletions(-) diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index ae3e9d8..5232984 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -1333,6 +1333,53 @@ static int winbond_set_single_mode(struct spi_nor *nor) return 0; } +static int micron_set_dummy_cycles(struct spi_nor *nor, u8 read_dummy) +{ + u8 vcr, val, mask; + int ret; + + /* Set bit3 (XIP) to disable the Continuous Read mode */ + mask = GENMASK(7, 4) | BIT(3); + val = ((read_dummy << 4) | BIT(3)) & mask; + + /* Read the Volatile Configuration Register (VCR). */ + ret = nor->read_reg(nor, SPINOR_OP_RD_VCR, &vcr, 1); + if (ret < 0) { + dev_err(nor->dev, "error while reading VCR register\n"); + return ret; + } + + /* Check whether we need to update the number of dummy cycles. */ + if ((vcr & mask) == val) { + nor->read_dummy = read_dummy; + return 0; + } + + /* Update the number of dummy into the VCR. */ + write_enable(nor); + vcr = (vcr & ~mask) | val; + ret = nor->write_reg(nor, SPINOR_OP_WR_VCR, &vcr, 1); + if (ret < 0) { + dev_err(nor->dev, "error while writing VCR register\n"); + return ret; + } + + ret = spi_nor_wait_till_ready(nor); + if (ret) + return ret; + + /* Read VCR and check it. */ + ret = nor->read_reg(nor, SPINOR_OP_RD_VCR, &vcr, 1); + if (ret < 0 || (vcr & mask) != val) { + dev_err(nor->dev, "Micron VCR dummy cycles not updated\n"); + return -EINVAL; + } + + /* Save the number of dummy cycles to use with Fast Read commands */ + nor->read_dummy = read_dummy; + return 0; +} + static int micron_set_protocol(struct spi_nor *nor, u8 mask, u8 val, enum spi_nor_protocol proto) { @@ -1417,12 +1464,15 @@ static int micron_set_quad_mode(struct spi_nor *nor) /* * Whatever the Quad mode is enabled or not, the * Fast Read Quad Output 1-1-4 (0x6b) op code is supported. + * Force the number of dummy cycles to 8 and disable the Continuous Read + * mode to prevent some drivers from using it by mistake (m25p80). + * We can change these settings safely as we write into a volatile + * register. */ if (nor->read_proto != SNOR_PROTO_4_4_4) nor->read_proto = SNOR_PROTO_1_1_4; nor->read_opcode = SPINOR_OP_READ_1_1_4; - nor->read_dummy = 8; - return 0; + return micron_set_dummy_cycles(nor, 8); } static int micron_set_dual_mode(struct spi_nor *nor) @@ -1447,12 +1497,15 @@ static int micron_set_dual_mode(struct spi_nor *nor) /* * Whatever the Dual mode is enabled or not, the * Fast Read Dual Output 1-1-2 (0x3b) op code is supported. + * Force the number of dummy cycles to 8 and disable the Continuous Read + * mode to prevent some drivers from using it by mistake (m25p80). + * We can change these settings safely as we write into a volatile + * register. */ if (nor->read_proto != SNOR_PROTO_2_2_2) nor->read_proto = SNOR_PROTO_1_1_2; nor->read_opcode = SPINOR_OP_READ_1_1_2; - nor->read_dummy = 8; - return 0; + return micron_set_dummy_cycles(nor, 8); } static int micron_set_single_mode(struct spi_nor *nor) @@ -1475,7 +1528,13 @@ static int micron_set_single_mode(struct spi_nor *nor) nor->read_proto = SNOR_PROTO_1_1_1; } - /* Force the number of dummy cycles to 8 for Fast Read, 0 for Read. */ + /* + * Force the number of dummy cycles to 8 for Fast Read, 0 for Read + * and disable the Continuous Read mode to prevent some drivers from + * using it by mistake (m25p80). + * We can change these settings safely as we write into a volatile + * register. + */ switch (nor->read_opcode) { case SPINOR_OP_READ: case SPINOR_OP_READ4: @@ -1486,8 +1545,7 @@ static int micron_set_single_mode(struct spi_nor *nor) read_dummy = 8; break; } - nor->read_dummy = read_dummy; - return 0; + return micron_set_dummy_cycles(nor, read_dummy); } static int spansion_set_quad_mode(struct spi_nor *nor) diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index d0a6f34..2dc0f8b 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -86,6 +86,8 @@ /* Used for Micron flashes only. */ #define SPINOR_OP_MIO_RDID 0xaf /* Multiple I/O Read JEDEC ID */ +#define SPINOR_OP_RD_VCR 0x85 /* Read VCR register */ +#define SPINOR_OP_WR_VCR 0x81 /* Write VCR register */ #define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */ #define SPINOR_OP_WD_EVCR 0x61 /* Write EVCR register */ -- 2.8.1