From 672e48427ca17fadd59d294eec56476dd6a75398 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Fri, 23 Jan 2015 15:18:03 +0000 Subject: [PATCH 076/114] BCM2708_DT: Build the overlays as well --- arch/arm/boot/dts/Makefile | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index adaebbb..3c7f539 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -55,6 +55,14 @@ dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb dtb-$(CONFIG_BCM2708_DT) += bcm2708-rpi-b.dtb dtb-$(CONFIG_BCM2708_DT) += bcm2708-rpi-b-plus.dtb +dtb-$(CONFIG_BCM2708_DT) += hifiberry-dac-overlay.dtb +dtb-$(CONFIG_BCM2708_DT) += hifiberry-dacplus-overlay.dtb +dtb-$(CONFIG_BCM2708_DT) += hifiberry-digi-overlay.dtb +dtb-$(CONFIG_BCM2708_DT) += iqaudio-dac-overlay.dtb +dtb-$(CONFIG_BCM2708_DT) += iqaudio-dacplus-overlay.dtb +dtb-$(CONFIG_BCM2708_DT) += lirc-rpi-overlay.dtb +dtb-$(CONFIG_BCM2708_DT) += w1-gpio-overlay.dtb +dtb-$(CONFIG_BCM2708_DT) += w1-gpio-pullup-overlay.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb @@ -524,6 +532,11 @@ targets += $(dtb-y) endif +# Enable fixups to support overlays on BCM2708 platforms +ifeq ($(CONFIG_BCM2708_DT),y) + DTC_FLAGS ?= -@ +endif + # *.dtb used to be generated in the directory above. Clean out the # old build results so people don't accidentally use them. dtbs: $(addprefix $(obj)/, $(dtb-y)) -- 1.8.3.2