From 7288414298b34dcda1216fee1fe38d05ea0027a2 Mon Sep 17 00:00:00 2001 From: Daniel Schwierzeck Date: Mon, 17 Dec 2012 23:32:39 +0100 Subject: net: add driver for Lantiq XWAY ARX100 switch Signed-off-by: Daniel Schwierzeck diff --git a/arch/mips/include/asm/arch-arx100/config.h b/arch/mips/include/asm/arch-arx100/config.h index 1a6c9bc..8f955e8 100644 --- a/arch/mips/include/asm/arch-arx100/config.h +++ b/arch/mips/include/asm/arch-arx100/config.h @@ -10,17 +10,21 @@ * and drivers for this SoC: * * CONFIG_LTQ_SUPPORT_UART - * - support the Danube ASC/UART interface and console + * - support the ARX100 ASC/UART interface and console * * CONFIG_LTQ_SUPPORT_NOR_FLASH * - support a parallel NOR flash via the CFI interface in flash bank 0 * * CONFIG_LTQ_SUPPORT_ETHERNET - * - support the Danube ETOP and MAC interface + * - support the ARX100 ETOP and MAC interface * * CONFIG_LTQ_SUPPORT_SPI_FLASH - * - support the Danube SPI interface and serial flash drivers + * - support the ARX100 SPI interface and serial flash drivers * - specific SPI flash drivers must be configured separately + * + * CONFIG_LTQ_SUPPORT_SPL_SPI_FLASH + * - build a preloader that runs in the internal SRAM and loads + * the U-Boot from SPI flash into RAM */ #ifndef __ARX100_CONFIG_H__ diff --git a/arch/mips/include/asm/arch-arx100/switch.h b/arch/mips/include/asm/arch-arx100/switch.h new file mode 100644 index 0000000..301056c --- /dev/null +++ b/arch/mips/include/asm/arch-arx100/switch.h @@ -0,0 +1,86 @@ +/* + * Copyright (C) 2012-2013 Daniel Schwierzeck + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ARX100_SWITCH_H__ +#define __ARX100_SWITCH_H__ + +struct ar9_switch_regs { + __be32 ps; /* Port status*/ + __be32 p0_ctl; /* Port 0 control */ + __be32 p1_ctl; /* Port 1 control */ + __be32 p2_ctl; /* Port 2 control */ + __be32 p0_vlan; /* Port 0 VLAN control */ + __be32 p1_vlan; /* Port 1 VLAN control */ + __be32 p2_vlan; /* Port 2 VLAN control */ + __be32 p0_inctl; /* Port 0 ingress control */ + __be32 p1_inctl; /* Port 1 ingress control */ + __be32 p2_inctl; /* Port 2 ingress control */ + u32 rsvd0[16]; + __be32 sw_gctl0; /* Switch global control 0 */ + __be32 sw_gctl1; /* Switch global control 1 */ + __be32 arp; /* ARP/RARP */ + __be32 strm_ctl; /* Storm control */ + __be32 rgmii_ctl; /* RGMII/GMII port control */ + u32 rsvd1[4]; + __be32 pmac_hd_ctl; /* PMAC header control */ + u32 rsvd2[15]; + __be32 mdio_ctrl; /* MDIO indirect access control */ + __be32 mdio_data; /* MDIO indirect read data */ +}; + +#define BUILD_CHECK_AR9_REG(name, offset) \ + BUILD_BUG_ON(offsetof(struct ar9_switch_regs, name) != (offset)) + +static inline void build_check_ar9_registers(void) +{ + BUILD_CHECK_AR9_REG(sw_gctl0, 0x68); + BUILD_CHECK_AR9_REG(rgmii_ctl, 0x78); + BUILD_CHECK_AR9_REG(pmac_hd_ctl, 0x8c); + BUILD_CHECK_AR9_REG(mdio_ctrl, 0xcc); + BUILD_CHECK_AR9_REG(mdio_data, 0xd0); +} + +#define P0_CTL_FLP (1 << 18) +#define P0_CTL_FLD (1 << 17) + +#define SW_GCTL0_SE (1 << 31) + +#define RGMII_CTL_P1_SHIFT 10 +#define RGMII_CTL_P1_MASK (0x3FF << RGMII_CTL_P1_SHIFT) +#define RGMII_CTL_P0_MASK 0x3FF +#define RGMII_CTL_P0IS_SHIFT 8 +#define RGMII_CTL_P0IS_RGMII (0x0 << RGMII_CTL_P0IS_SHIFT) +#define RGMII_CTL_P0IS_MII (0x1 << RGMII_CTL_P0IS_SHIFT) +#define RGMII_CTL_P0IS_REVMII (0x2 << RGMII_CTL_P0IS_SHIFT) +#define RGMII_CTL_P0IS_RMII (0x3 << RGMII_CTL_P0IS_SHIFT) +#define RGMII_CTL_P0RDLY_SHIFT 6 +#define RGMII_CTL_P0RDLY_0_0 (0x0 << RGMII_CTL_P0RDLY_SHIFT) +#define RGMII_CTL_P0RDLY_1_5 (0x1 << RGMII_CTL_P0RDLY_SHIFT) +#define RGMII_CTL_P0RDLY_1_75 (0x2 << RGMII_CTL_P0RDLY_SHIFT) +#define RGMII_CTL_P0RDLY_2_0 (0x3 << RGMII_CTL_P0RDLY_SHIFT) +#define RGMII_CTL_P0TDLY_SHIFT 4 +#define RGMII_CTL_P0TDLY_0_0 (0x0 << RGMII_CTL_P0TDLY_SHIFT) +#define RGMII_CTL_P0TDLY_1_5 (0x1 << RGMII_CTL_P0TDLY_SHIFT) +#define RGMII_CTL_P0TDLY_1_75 (0x2 << RGMII_CTL_P0TDLY_SHIFT) +#define RGMII_CTL_P0TDLY_2_0 (0x3 << RGMII_CTL_P0TDLY_SHIFT) +#define RGMII_CTL_P0SPD_SHIFT 2 +#define RGMII_CTL_P0SPD_10 (0x0 << RGMII_CTL_P0SPD_SHIFT) +#define RGMII_CTL_P0SPD_100 (0x1 << RGMII_CTL_P0SPD_SHIFT) +#define RGMII_CTL_P0SPD_1000 (0x2 << RGMII_CTL_P0SPD_SHIFT) +#define RGMII_CTL_P0DUP_FULL (1 << 1) +#define RGMII_CTL_P0FCE_EN (1 << 0) + +#define PMAC_HD_CTL_AC (1 << 18) + +#define MDIO_CTRL_WD_SHIFT 16 +#define MDIO_CTRL_MBUSY (1 << 15) +#define MDIO_CTRL_OP_READ (1 << 11) +#define MDIO_CTRL_OP_WRITE (1 << 10) +#define MDIO_CTRL_PHYAD_SHIFT 5 +#define MDIO_CTRL_PHYAD_MASK (0x1f << MDIO_CTRL_PHYAD_SHIFT) +#define MDIO_CTRL_REGAD_MASK 0x1f + +#endif /* __ARX100_SWITCH_H__ */ diff --git a/drivers/net/Makefile b/drivers/net/Makefile index bbc2c92..926b8c2 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -38,6 +38,7 @@ COBJS-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o COBJS-$(CONFIG_KS8851_MLL) += ks8851_mll.o COBJS-$(CONFIG_LAN91C96) += lan91c96.o COBJS-$(CONFIG_LANTIQ_DANUBE_ETOP) += lantiq_danube_etop.o +COBJS-$(CONFIG_LANTIQ_ARX100_SWITCH) += lantiq_arx100_switch.o COBJS-$(CONFIG_LANTIQ_VRX200_SWITCH) += lantiq_vrx200_switch.o COBJS-$(CONFIG_MACB) += macb.o COBJS-$(CONFIG_MCFFEC) += mcffec.o mcfmii.o diff --git a/drivers/net/lantiq_arx100_switch.c b/drivers/net/lantiq_arx100_switch.c new file mode 100644 index 0000000..cc65249 --- /dev/null +++ b/drivers/net/lantiq_arx100_switch.c @@ -0,0 +1,410 @@ +/* + * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#define DEBUG +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define LTQ_ETH_RX_BUFFER_CNT PKTBUFSRX +#define LTQ_ETH_TX_BUFFER_CNT 8 +#define LTQ_ETH_RX_DATA_SIZE PKTSIZE_ALIGN +#define LTQ_ETH_IP_ALIGN 2 + +#define LTQ_MDIO_DRV_NAME "ltq-mdio" +#define LTQ_ETH_DRV_NAME "ltq-eth" + +#define LTQ_ETHSW_MAX_GMAC 2 +#define LTQ_ETHSW_PMAC 2 + +struct ltq_eth_priv { + struct ltq_dma_device dma_dev; + struct mii_dev *bus; + struct eth_device *dev; + struct phy_device *phymap[LTQ_ETHSW_MAX_GMAC]; + int rx_num; + int tx_num; +}; + +static struct ar9_switch_regs *switch_regs = + (struct ar9_switch_regs *) CKSEG1ADDR(LTQ_SWITCH_BASE); + +static int ltq_mdio_is_busy(void) +{ + u32 mdio_ctrl = ltq_readl(&switch_regs->mdio_ctrl); + + return mdio_ctrl & MDIO_CTRL_MBUSY; +} + +static void ltq_mdio_poll(void) +{ + while (ltq_mdio_is_busy()) + cpu_relax(); + + __udelay(1000); +} + +static int ltq_mdio_read(struct mii_dev *bus, int phyad, int devad, + int regad) +{ + u32 mdio_ctrl; + int retval; + + mdio_ctrl = MDIO_CTRL_MBUSY | MDIO_CTRL_OP_READ | + ((phyad << MDIO_CTRL_PHYAD_SHIFT) & MDIO_CTRL_PHYAD_MASK) | + (regad & MDIO_CTRL_REGAD_MASK); + + ltq_mdio_poll(); + ltq_writel(&switch_regs->mdio_ctrl, mdio_ctrl); + ltq_mdio_poll(); + retval = ltq_readl(&switch_regs->mdio_data); + ltq_writel(&switch_regs->mdio_data, 0xFFFF); + + debug("%s: phyad %02x, regad %02x, val %02x\n", __func__, phyad, regad, retval); + + return retval; +} + +static int ltq_mdio_write(struct mii_dev *bus, int phyad, int devad, + int regad, u16 val) +{ + u32 mdio_ctrl; + + debug("%s: phyad %02x, regad %02x, val %02x\n", __func__, phyad, regad, val); + + mdio_ctrl = (val << MDIO_CTRL_WD_SHIFT) | MDIO_CTRL_MBUSY | + MDIO_CTRL_OP_WRITE | + ((phyad << MDIO_CTRL_PHYAD_SHIFT) & MDIO_CTRL_PHYAD_MASK) | + (regad & MDIO_CTRL_REGAD_MASK); + + ltq_mdio_poll(); + ltq_writel(&switch_regs->mdio_ctrl, mdio_ctrl); + + return 0; +} + +static void ltq_eth_gmac_update(struct phy_device *phydev, int num) +{ +} + +static inline u8 *ltq_eth_rx_packet_align(int rx_num) +{ + u8 *packet = (u8 *) NetRxPackets[rx_num]; + + /* + * IP header needs + */ + return packet + LTQ_ETH_IP_ALIGN; +} + +static int ltq_eth_init(struct eth_device *dev, bd_t *bis) +{ + struct ltq_eth_priv *priv = dev->priv; + struct ltq_dma_device *dma_dev = &priv->dma_dev; + struct phy_device *phydev; + int i; + + for (i = 0; i < LTQ_ETHSW_MAX_GMAC; i++) { + phydev = priv->phymap[i]; + if (!phydev) + continue; + + phy_startup(phydev); + ltq_eth_gmac_update(phydev, i); + } + + for (i = 0; i < LTQ_ETH_RX_BUFFER_CNT; i++) + ltq_dma_rx_map(dma_dev, i, ltq_eth_rx_packet_align(i), + LTQ_ETH_RX_DATA_SIZE); + + ltq_dma_enable(dma_dev); + + priv->rx_num = 0; + priv->tx_num = 0; + + return 0; +} + +static void ltq_eth_halt(struct eth_device *dev) +{ + struct ltq_eth_priv *priv = dev->priv; + struct ltq_dma_device *dma_dev = &priv->dma_dev; + struct phy_device *phydev; + int i; + + ltq_dma_reset(dma_dev); + + for (i = 0; i < LTQ_ETHSW_MAX_GMAC; i++) { + phydev = priv->phymap[i]; + if (!phydev) + continue; + + phy_shutdown(phydev); + phydev->link = 0; + ltq_eth_gmac_update(phydev, i); + } +} + +static int ltq_eth_send(struct eth_device *dev, void *packet, int length) +{ + struct ltq_eth_priv *priv = dev->priv; + struct ltq_dma_device *dma_dev = &priv->dma_dev; + int err; + + err = ltq_dma_tx_map(dma_dev, priv->tx_num, packet, length, 10); + if (err) { + puts("NET: timeout on waiting for TX descriptor\n"); + return -1; + } + + priv->tx_num = (priv->tx_num + 1) % LTQ_ETH_TX_BUFFER_CNT; + + return err; +} + +static int ltq_eth_recv(struct eth_device *dev) +{ + struct ltq_eth_priv *priv = dev->priv; + struct ltq_dma_device *dma_dev = &priv->dma_dev; + u8 *packet; + int len; + + if (!ltq_dma_rx_poll(dma_dev, priv->rx_num)) + return 0; + +#if 0 + printf("%s: rx_num %d\n", __func__, priv->rx_num); +#endif + + len = ltq_dma_rx_length(dma_dev, priv->rx_num); + packet = ltq_eth_rx_packet_align(priv->rx_num); + +#if 0 + printf("%s: received: packet %p, len %u, rx_num %d\n", + __func__, packet, len, priv->rx_num); +#endif + + if (len) + NetReceive(packet, len); + + ltq_dma_rx_map(dma_dev, priv->rx_num, packet, + LTQ_ETH_RX_DATA_SIZE); + + priv->rx_num = (priv->rx_num + 1) % LTQ_ETH_RX_BUFFER_CNT; + + return 0; +} + +static void ltq_eth_pmac_init(void) +{ + /* Add CRC to packets from DMA to PMAC */ + ltq_setbits(&switch_regs->pmac_hd_ctl, PMAC_HD_CTL_AC); + + /* Force link up */ + ltq_setbits(&switch_regs->p2_ctl, P0_CTL_FLP); +} + +static void ltq_eth_hw_init(const struct ltq_eth_port_config *port) +{ + /* Power up ethernet subsystems */ + ltq_pm_enable(LTQ_PM_ETH); + + /* Enable switch core */ + ltq_setbits(&switch_regs->sw_gctl0, SW_GCTL0_SE); + + /* MII/MDIO */ + gpio_set_altfunc(42, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT); + /* MII/MDC */ + gpio_set_altfunc(43, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT); + + ltq_eth_pmac_init(); +} + +static void ltq_eth_port_config(struct ltq_eth_priv *priv, + const struct ltq_eth_port_config *port) +{ + struct phy_device *phydev; + struct switch_device *sw; + u32 rgmii_ctl; + unsigned int port_ctl, port_xmii = 0; + + if (port->num > 1) + return; + + rgmii_ctl = ltq_readl(&switch_regs->rgmii_ctl); + + if (port->num == 1) + port_ctl = ltq_readl(&switch_regs->p1_ctl); + else + port_ctl = ltq_readl(&switch_regs->p0_ctl); + + switch (port->phy_if) { + case PHY_INTERFACE_MODE_RGMII: + port_xmii = RGMII_CTL_P0IS_RGMII; + + switch (port->rgmii_tx_delay) { + case 1: + port_xmii |= RGMII_CTL_P0TDLY_1_5; + break; + case 2: + port_xmii |= RGMII_CTL_P0TDLY_1_75; + break; + case 3: + port_xmii |= RGMII_CTL_P0TDLY_2_0; + break; + default: + break; + } + + switch (port->rgmii_rx_delay) { + case 1: + port_xmii |= RGMII_CTL_P0RDLY_1_5; + break; + case 2: + port_xmii |= RGMII_CTL_P0RDLY_1_75; + break; + case 3: + port_xmii |= RGMII_CTL_P0RDLY_2_0; + break; + default: + break; + } + + if (!(port->flags & LTQ_ETH_PORT_PHY)) { + port_xmii |= (RGMII_CTL_P0SPD_1000 | + RGMII_CTL_P0DUP_FULL); + port_ctl |= P0_CTL_FLP; + } + + break; + case PHY_INTERFACE_MODE_MII: + port_xmii = RGMII_CTL_P0IS_MII; + + if (!(port->flags & LTQ_ETH_PORT_PHY)) { + port_xmii |= (RGMII_CTL_P0SPD_100 | + RGMII_CTL_P0DUP_FULL); + port_ctl |= P0_CTL_FLP; + } + + break; + default: + break; + } + + if (port->num == 1) { + ltq_writel(&switch_regs->p1_ctl, port_ctl); + + rgmii_ctl &= ~RGMII_CTL_P1_MASK; + rgmii_ctl |= (port_xmii << RGMII_CTL_P1_SHIFT); + } else { + ltq_writel(&switch_regs->p0_ctl, port_ctl); + + rgmii_ctl &= ~RGMII_CTL_P0_MASK; + rgmii_ctl |= port_xmii; + } + + ltq_writel(&switch_regs->rgmii_ctl, rgmii_ctl); + + /* Connect to external switch */ + if (port->flags & LTQ_ETH_PORT_SWITCH) { + sw = switch_connect(priv->bus); + if (sw) + switch_setup(sw); + } + + /* Connect to internal/external PHYs */ + if (port->flags & LTQ_ETH_PORT_PHY) { + phydev = phy_connect(priv->bus, port->phy_addr, priv->dev, + port->phy_if); + if (phydev) + phy_config(phydev); + + priv->phymap[port->num] = phydev; + } +} + +int ltq_eth_initialize(const struct ltq_eth_board_config *board_config) +{ + struct eth_device *dev; + struct mii_dev *bus; + struct ltq_eth_priv *priv; + struct ltq_dma_device *dma_dev; + const struct ltq_eth_port_config *port = &board_config->ports[0]; + int i, ret; + + build_check_ar9_registers(); + + ltq_dma_init(); + ltq_eth_hw_init(port); + + dev = calloc(1, sizeof(*dev)); + if (!dev) + return -1; + + priv = calloc(1, sizeof(*priv)); + if (!priv) + return -1; + + bus = mdio_alloc(); + if (!bus) + return -1; + + sprintf(dev->name, LTQ_ETH_DRV_NAME); + dev->priv = priv; + dev->init = ltq_eth_init; + dev->halt = ltq_eth_halt; + dev->recv = ltq_eth_recv; + dev->send = ltq_eth_send; + + sprintf(bus->name, LTQ_MDIO_DRV_NAME); + bus->read = ltq_mdio_read; + bus->write = ltq_mdio_write; + bus->priv = priv; + + dma_dev = &priv->dma_dev; + dma_dev->port = 0; + dma_dev->rx_chan.chan_no = 0; + dma_dev->rx_chan.class = 0; + dma_dev->rx_chan.num_desc = LTQ_ETH_RX_BUFFER_CNT; + dma_dev->rx_endian_swap = LTQ_DMA_ENDIANESS_B3_B2_B1_B0; + dma_dev->rx_burst_len = LTQ_DMA_BURST_2WORDS; + dma_dev->tx_chan.chan_no = 1; + dma_dev->tx_chan.class = 0; + dma_dev->tx_chan.num_desc = LTQ_ETH_TX_BUFFER_CNT; + dma_dev->tx_endian_swap = LTQ_DMA_ENDIANESS_B3_B2_B1_B0; + dma_dev->tx_burst_len = LTQ_DMA_BURST_2WORDS; + + priv->bus = bus; + priv->dev = dev; + + ret = ltq_dma_register(dma_dev); + if (ret) + return ret; + + ret = mdio_register(bus); + if (ret) + return ret; + + ret = eth_register(dev); + if (ret) + return ret; + + for (i = 0; i < board_config->num_ports; i++) + ltq_eth_port_config(priv, &board_config->ports[i]); + + return 0; +} -- 1.8.3.2