From f3faa736b191fb92429abdab653dc0f335135c39 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Wed, 16 Mar 2016 09:26:48 +0000 Subject: ramips: Add support for Xiaomi MiWiFi Nano Xiaomi MiWiFi Nano is based on Mediatek MT7628 with 64MB ram 16MB flash Signed-off-by: Noble Pepper v3 includes changes suggested by L. D. Pinney & Karl Palsson- Eliminate en25q64 (4MB) flash chip Alphabetization Remove hyphen in model Rename profile from miwifinano.mk to xiaomi.mk Add gpios that are attached to leds git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49024 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/ramips/dts/MIWIFI-NANO.dts | 99 +++++++++++++++++++++++++++++++++ 1 file changed, 99 insertions(+) create mode 100644 target/linux/ramips/dts/MIWIFI-NANO.dts (limited to 'target/linux/ramips/dts/MIWIFI-NANO.dts') diff --git a/target/linux/ramips/dts/MIWIFI-NANO.dts b/target/linux/ramips/dts/MIWIFI-NANO.dts new file mode 100644 index 0000000000..ea7b27035a --- /dev/null +++ b/target/linux/ramips/dts/MIWIFI-NANO.dts @@ -0,0 +1,99 @@ +/dts-v1/; + +/include/ "mt7628an.dtsi" + +/ { + compatible = "xiaomi,MiWifi Nano", "mediatek,mt7628an-soc"; + model = "MiWiFi Nano"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "gpio"; + ralink,function = "gpio"; + }; + }; + }; + + gpio-export { + compatible = "gpio-export"; + #size-cells = <0>; + + gpio11 { + /* blue led */ + gpio-export,name = "gpio11"; + gpio-export,direction_may_change = <1>; + gpio-export,output = <1>; + gpios = <&gpio0 11 0>; + }; + + gpio37 { + /* red led */ + gpio-export,name = "gpio37"; + gpio-export,direction_may_change = <1>; + gpio-export,output = <1>; + gpios = <&gpio1 5 0>; + }; + + gpio44 { + /* yellow led */ + gpio-export,name = "gpio44"; + gpio-export,direction_may_change = <1>; + gpio-export,output = <1>; + gpios = <&gpio1 12 0>; + }; + }; + + + wmac@10300000 { + status = "okay"; + }; + + palmbus@10000000 { + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0 0>; + linux,modalias = "m25p80"; + spi-max-frequency = <10000000>; + m25p,chunked-io = <32>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; + }; +}; -- cgit v1.2.3