From b7e1d8878900efe4c94f8ec1f3dc8a42d526fe9d Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 29 May 2015 12:26:01 +0000 Subject: ipq806x: replace caf nss-gmac driver by upstream stmmac This driver has been cherry-picked and backported from the following LKML thread: *https://lkml.org/lkml/2015/5/26/744 It also updates the DT accordingly. Signed-off-by: Mathieu Olivari git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45831 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- ...-qcom-add-gmac-nodes-to-ipq806x-platforms.patch | 210 +++++++++++++++++++++ 1 file changed, 210 insertions(+) create mode 100644 target/linux/ipq806x/patches-3.18/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch (limited to 'target/linux/ipq806x/patches-3.18/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch') diff --git a/target/linux/ipq806x/patches-3.18/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch b/target/linux/ipq806x/patches-3.18/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch new file mode 100644 index 0000000000..cce30b09a2 --- /dev/null +++ b/target/linux/ipq806x/patches-3.18/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch @@ -0,0 +1,210 @@ +From cab1f4720e82f2e17eaeed9a9ad9e4f07c742977 Mon Sep 17 00:00:00 2001 +From: Mathieu Olivari +Date: Mon, 11 May 2015 12:29:18 -0700 +Subject: [PATCH 8/8] ARM: dts: qcom: add gmac nodes to ipq806x platforms + +Signed-off-by: Mathieu Olivari +--- + arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 31 ++++++++++++ + arch/arm/boot/dts/qcom-ipq8064-db149.dts | 43 ++++++++++++++++ + arch/arm/boot/dts/qcom-ipq8064.dtsi | 86 ++++++++++++++++++++++++++++++++ + 3 files changed, 160 insertions(+) + +--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts ++++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +@@ -64,6 +64,16 @@ + bias-disable; + }; + }; ++ ++ rgmii2_pins: rgmii2_pins { ++ mux { ++ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", ++ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; ++ function = "rgmii2"; ++ drive-strength = <8>; ++ bias-disable; ++ }; ++ }; + }; + + gsbi@16300000 { +@@ -201,5 +211,26 @@ + reg = <4>; + }; + }; ++ ++ gmac1: ethernet@37200000 { ++ status = "ok"; ++ phy-mode = "rgmii"; ++ phy-handle = <&phy4>; ++ qcom,id = <1>; ++ ++ pinctrl-0 = <&rgmii2_pins>; ++ pinctrl-names = "default"; ++ }; ++ ++ gmac2: ethernet@37400000 { ++ status = "ok"; ++ phy-mode = "sgmii"; ++ qcom,id = <2>; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; + }; + }; +--- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts ++++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts +@@ -72,6 +72,14 @@ + bias-disable; + }; + }; ++ ++ rgmii0_pins: rgmii0_pins { ++ mux { ++ pins = "gpio2", "gpio66"; ++ drive-strength = <8>; ++ bias-disable; ++ }; ++ }; + }; + + gsbi2: gsbi@12480000 { +@@ -222,5 +230,40 @@ + reg = <7>; + }; + }; ++ ++ gmac0: ethernet@37000000 { ++ status = "ok"; ++ phy-mode = "rgmii"; ++ qcom,id = <0>; ++ phy-handle = <&phy4>; ++ ++ pinctrl-0 = <&rgmii0_pins>; ++ pinctrl-names = "default"; ++ }; ++ ++ gmac1: ethernet@37200000 { ++ status = "ok"; ++ phy-mode = "sgmii"; ++ qcom,id = <1>; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ ++ gmac2: ethernet@37400000 { ++ status = "ok"; ++ phy-mode = "sgmii"; ++ qcom,id = <2>; ++ phy-handle = <&phy6>; ++ }; ++ ++ gmac3: ethernet@37600000 { ++ status = "ok"; ++ phy-mode = "sgmii"; ++ qcom,id = <3>; ++ phy-handle = <&phy7>; ++ }; + }; + }; +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -638,5 +638,91 @@ + dr_mode = "host"; + }; + }; ++ ++ nss_common: syscon@03000000 { ++ compatible = "syscon"; ++ reg = <0x03000000 0x0000FFFF>; ++ }; ++ ++ qsgmii_csr: syscon@1bb00000 { ++ compatible = "syscon"; ++ reg = <0x1bb00000 0x000001FF>; ++ }; ++ ++ gmac0: ethernet@37000000 { ++ device_type = "network"; ++ compatible = "qcom,ipq806x-gmac"; ++ reg = <0x37000000 0x200000>; ++ interrupts = ; ++ interrupt-names = "macirq"; ++ ++ qcom,nss-common = <&nss_common>; ++ qcom,qsgmii-csr = <&qsgmii_csr>; ++ ++ clocks = <&gcc GMAC_CORE1_CLK>; ++ clock-names = "stmmaceth"; ++ ++ resets = <&gcc GMAC_CORE1_RESET>; ++ reset-names = "stmmaceth"; ++ ++ status = "disabled"; ++ }; ++ ++ gmac1: ethernet@37200000 { ++ device_type = "network"; ++ compatible = "qcom,ipq806x-gmac"; ++ reg = <0x37200000 0x200000>; ++ interrupts = ; ++ interrupt-names = "macirq"; ++ ++ qcom,nss-common = <&nss_common>; ++ qcom,qsgmii-csr = <&qsgmii_csr>; ++ ++ clocks = <&gcc GMAC_CORE2_CLK>; ++ clock-names = "stmmaceth"; ++ ++ resets = <&gcc GMAC_CORE2_RESET>; ++ reset-names = "stmmaceth"; ++ ++ status = "disabled"; ++ }; ++ ++ gmac2: ethernet@37400000 { ++ device_type = "network"; ++ compatible = "qcom,ipq806x-gmac"; ++ reg = <0x37400000 0x200000>; ++ interrupts = ; ++ interrupt-names = "macirq"; ++ ++ qcom,nss-common = <&nss_common>; ++ qcom,qsgmii-csr = <&qsgmii_csr>; ++ ++ clocks = <&gcc GMAC_CORE3_CLK>; ++ clock-names = "stmmaceth"; ++ ++ resets = <&gcc GMAC_CORE3_RESET>; ++ reset-names = "stmmaceth"; ++ ++ status = "disabled"; ++ }; ++ ++ gmac3: ethernet@37600000 { ++ device_type = "network"; ++ compatible = "qcom,ipq806x-gmac"; ++ reg = <0x37600000 0x200000>; ++ interrupts = ; ++ interrupt-names = "macirq"; ++ ++ qcom,nss-common = <&nss_common>; ++ qcom,qsgmii-csr = <&qsgmii_csr>; ++ ++ clocks = <&gcc GMAC_CORE4_CLK>; ++ clock-names = "stmmaceth"; ++ ++ resets = <&gcc GMAC_CORE4_RESET>; ++ reset-names = "stmmaceth"; ++ ++ status = "disabled"; ++ }; + }; + }; -- cgit v1.2.3