From 7b4d4ed5ceb7bfabad68b0c93dc4371f701f20b1 Mon Sep 17 00:00:00 2001 From: Waldemar Brodkorb Date: Mon, 14 Mar 2005 03:16:54 +0000 Subject: remove firmware names git-svn-id: svn://svn.openwrt.org/openwrt/trunk/openwrt@368 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- scripts/flash.sh | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'scripts/flash.sh') diff --git a/scripts/flash.sh b/scripts/flash.sh index aedb25072c..49adfcce2a 100644 --- a/scripts/flash.sh +++ b/scripts/flash.sh @@ -24,16 +24,14 @@ if [ -z "$1" ] || [ ! -f $1 ] || [ -z $2 ]; then echo Usage: $0 firmware vendor cat << EOF IMPORTANT: -Notes for Linksys Routers: +Notes for Linksys router: be sure you have set boot_wait to yes. Power on your router after executing this script. - Use openwrt-gs-code.bin or openwrt-g-code.bin as firmware. -Notes for Asus Routers: - be sure POWER led is flashing (If this is not a case +Notes for Asus router: + be sure POWER led is flashing (If this is not the case poweroff the device, push the reset button & power on it again, then release button) - Use openwrt-linux.trx as firmware. 1) connect your pc to the LAN port 2) be sure your link is up and has an address in the -- cgit v1.2.3