aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* kernel: remove out-of-tree patches for reducing qdisc truesizeFelix Fietkau2016-06-207-111/+7
| | | | | | The copy overhead can be quite expensive Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fq_codel match flows_cnt to limit sizingKevin Darbyshire-Bryant2016-06-203-6/+12
| | | | | | | | | | | | | | | | | | OpenWRT changed the default fq_codel sch->limit from 10240 to 1024, without also adjusting q->flows_cnt. Eric Dumazet explains below that you must also adjust the buckets (q->flows_cnt) for this not to break. Eric explains: Limit of 1024 packets and 1024 flows is not wise I think. (If all buckets are in use, each bucket has a virtual queue of 1 packet, which is almost the same than having no queue at all) I suggest to have at least 8 packets per bucket, to let Codel have a chance to trigger. So you could either reduce number of buckets to 128 (if memory is tight), or increase limit to 8192. flows_cnt is now set to 1024/8=128 Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* kernel: fold codel default fix into main patchFelix Fietkau2016-06-202-22/+20
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: Add support for Ubiquiti UniFi AP AC PROP.Wassi2016-06-2010-4/+103
| | | | | Add support for the Ubiquiti UniFi AP AC PRO Signed-off-by: P.Wassi <p.wassi at gmx.at>
* ar71xx: Rename unifiac to unifiac-liteP.Wassi2016-06-2010-28/+33
| | | | | | | To avoid confusion with different unifiac devices, rename existing target "unifiac" to "unifiac-lite", before "unifiac-pro" is introduced. Signed-off-by: P.Wassi <p.wassi at gmx.at>
* ar71xx: fix register address calculation for DDR flushingFelix Fietkau2016-06-201-0/+23
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix typo in pci memory window initialization fixFelix Fietkau2016-06-201-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix yaffs2 build with kernel 4.4Jo-Philipp Wich2016-06-201-0/+47
| | | | | | | Fix YAFFS2 build after upstream nd_set_link() removal by importing http://permalink.gmane.org/gmane.linux.embedded.yocto.linux-yocto/4373 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: typo in jjplus profileCezary Jackiewicz2016-06-201-1/+1
| | | | Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
* ar71xx: register the gpio driver earlierFelix Fietkau2016-06-201-0/+15
| | | | | | This allows gpio requests from mach files to succeed. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix a PCI initialization issue in Linux 4.4Felix Fietkau2016-06-201-0/+37
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix DDR write buffer flushing issues with 4.4Felix Fietkau2016-06-2013-97/+1386
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: add support for TP-LINK TL-WR842N/ND v3Cezary Jackiewicz2016-06-209-9/+129
| | | | | | | | | | | - CPU QCA9531-BL3A - RAM: 64MB - flash: 16MB - USB AP143 platform, similar to tl-wr841n v10/v11, but with USB Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
* ar71xx: add proper support for Archer-C7 V2John Crispin2016-06-203-5/+42
| | | | | | This has minor differences to the V1 Signed-off-by: John Crispin <john@phrozen.org>
* kernel: add missing config symbolFelix Fietkau2016-06-201-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: Fix TP-LINK Archer-C5/C7 v2 rfkillJohn Crispin2016-06-201-1/+1
| | | | | | Fix ARCHER_C7_GPIO_BTN_RFKILL, which is attached to GPIO23 Signed-off-by: Lars Buerding <lb.wrt@metatux.net>
* arc: Build uImage as well as vmlinux output filesAlexey Brodkin2016-06-202-16/+72
| | | | | | | | | | | | | | | | | | | | | | Initially for ARC we were building vmlinux images because it was both simpler and more convenient to debug Linux kernel in runt-time via JTAG. Now when base system works quite nice we may finally use U-Boot for loading the system image as well. Still we keep building vmlinux images as some of our boards are development boards and loading images with JTAG could be at some points very beneficial. Note for U-Boot header it's required to specify 2 values: * loading address * entry point (if it doesn't match loading address) and in case of ARC entry point (EP) not only differs from loading address but also changes from build to build due to initramfs being placed between loading address and text section. To accommodate that feature we have to calculate EP after vmlinux gets built and before call to mkimage. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* target: socfpga: Add support for QSPI NOR bootMarek Vasut2016-06-2034-16/+4760
| | | | | | | Add necessary kernel backports to support the Cadence QSPI controller present on the Altera SoCFPGA SoC. Signed-off-by: Marek Vasut <marex@denx.de>
* kernel: update kernel 4.4 to version 4.4.10Álvaro Fernández Rojas2016-06-203-34/+8
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: update kernel 4.4 to version 4.4.9Álvaro Fernández Rojas2016-06-20107-920/+246
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: update kernel 4.4 to version 4.4.8Álvaro Fernández Rojas2016-06-2013-234/+35
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: update to latest versionÁlvaro Fernández Rojas2016-06-20241-839/+13437
| | | | | | | As usual these patches were extracted from the raspberry pi repo: https://github.com/raspberrypi/linux/commits/rpi-4.4.y Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* treewide: fix replace nbd@openwrt.org with nbd@nbd.nameFelix Fietkau2016-06-19140-220/+220
| | | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49379 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: drop Copyright header from two of my bash scriptsRafał Miłecki2016-06-192-5/+0
| | | | | | | | | | | | | | | Both scripts modified by this patch were added by me. First of all I incorrectly added OpenWrt as Copyright holder. It was wrong because: 1) I simply can't transfer my moral rights according to the Polish law 2) Transfering copyrights (economic rights) requires an agreement which I didn't sign with OpenWrt(.org). Other than that I don't find these trivial scripts important enough to put info about *my* copyrights in a header so this patch just drops them completely. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49377 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: remove linux 4.3 configLuka Perkov2016-06-191-4942/+0
| | | | | | | | When linux 4.3 support was removed the config was left. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49374 3c298f89-4303-0410-b956-a3cf2f4a3e73
* krikwood: Make Iconnect image use new ubi format styleLuka Perkov2016-06-192-6/+11
| | | | | | | | | To flash first time follow instructions in commit: "kirkwood/dockstar: use ubi(kernel, squashfs, ubifs) images" Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49370 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: Migrate Iconnect to new ubi image formatLuka Perkov2016-06-191-1/+1
| | | | | | | | Default partition name is now ubi. Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49369 3c298f89-4303-0410-b956-a3cf2f4a3e73
* target: socfpga: Add Altera SoCFPGA supportLuka Perkov2016-06-1923-0/+1578
| | | | | | | | | This patch adds support for the Altera SoCFPGA target. Both generic target and Terasic SoCkit boards are supported. Signed-off-by: Marek Vasut <marex@denx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49367 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix DTB generationLuka Perkov2016-06-191-1/+1
| | | | | | | | using preprocessor style includes when calling dtc directly. Signed-off-by: John Crispin <john@phrozen.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49360 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Change all '/include/' clauses to '#include' so preprocessing can be ↵Luka Perkov2016-06-19175-176/+176
| | | | | | | | done properly for the entire device trees. Signed-off-by: Stanislav Galabov <sgalabov@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49357 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Add hex prefix (0x) to dtsi reg properties where needed.Luka Perkov2016-06-199-29/+29
| | | | | | Signed-off-by: Stanislav Galabov <sgalabov@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49356 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: introduce serial0 aliasesLuka Perkov2016-06-1910-10/+32
| | | | | | | | | This patch introduces serial0 aliases in the ramips DTS files, which can then be used to denote the active console instead of relying on bootargs. Signed-off-by: Stanislav Galabov <sgalabov@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49355 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: fix wgt634u port assignment, broken since openwrt r47866Luka Perkov2016-06-191-1/+1
| | | | | | Signed-off-by: Russell Senior <russell@personaltelco.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49353 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: mt7620: [UPSTREAM] fix USB frequency scalingLuka Perkov2016-06-191-0/+33
| | | | | | | | | The logic for the SoC check got inverted. We need to check if it's not a MT76x8. Signed-off-by: D. Andrei Măceș <dmaces@nd.edu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49352 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Fix alphabetical sorting for 02_networkLuka Perkov2016-06-191-11/+11
| | | | | | Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49351 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Don't use a VLAN for the single ethernet port of the A5-V11.Luka Perkov2016-06-191-5/+2
| | | | | | | | | | | | This router only has one ethernet port, so a VLAN is useless here, now that the rt3050 TCP bug that happened without VLANs has been fixed for a very long time. Add this router to the VLAN-less config that is used by other single-port routers. Also fix MAC address detection code since this router has no WAN port. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49350 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Fix network for routers without VLANs on eth0.Luka Perkov2016-06-191-6/+2
| | | | | | | | | | | | | | | | Some routers only have one port, so eth0 is used without VLANs for them. Revision r47720 introduced some changes, but wrongly confused "enable" with "reset". VLANs need to be disabled for those routers, and the switch may be reset. Fix this, by explicitly disabling VLANs instead of resetting the switch for these routers. Also merge duplicate configuration for the "m2m". Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49349 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add workaround to rebuild vdso-o32.so.dbgLuka Perkov2016-06-191-2/+13
| | | | | | | | | | | | | | | | Building for octeon fails with 'arch/mips/vdso/vdso-o32.so.dbg' already contains a '.MIPS.abiflags' section if the file already exists from a prior build. Use the same workaround as the one for vdso.so.dbg committed in 9eb155353a5f5137ec85a5b5b0287af63c544710. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49345 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add a workaround to rebuild vdso.so.dbg after genvdsoLuka Perkov2016-06-191-0/+11
| | | | | | | | | | | | | | | Currently the build fails with 'arch/mips/vdso/vdso.so.dbg' already contains a '.MIPS.abiflags' section if the file already exists from a prior build. Add a makefile rule to force the rebuild of vdso.so.dbg if genvdso has has been changed to workaround the failure. Signed-off-by: Jo-Philipp Wich <jo@mein.io> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49334 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: fix xway image buildingLuka Perkov2016-06-191-3/+3
| | | | | | | | | | | | | | | | | | | | | Commit 8c130dd (lantiq: use new image build process for some images) broke image generation for the xway target since the generated macros reference not existing WBMRA.dts and WBMRB.dts files leading to the following build error: mips-openwrt-linux-musl-cpp: error: ../dts/WBMRA.dts: No such file or directory mips-openwrt-linux-musl-cpp: warning: '-x assembler-with-cpp' after last input file has no effect mips-openwrt-linux-musl-cpp: fatal error: no input files Previously both the WBMRA and WBMRB profiles shared a common WBMR DT since the only difference is the embedded firmware kmod package. Extend the lantiqImage macro to optionally support specifying a different DTS file and use this facility to let the both WBMR profiles reference the correct device tree file. Signed-off-by: Jo-Philipp Wich <jo@mein.io> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49330 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86: remove old references to kmod-acpi-buttonLuka Perkov2016-06-192-2/+2
| | | | | | | | | | | The kmod-acpi-button functionality is included in the kernel where needed and the corresponding kmod package has been deleted long ago, therfor drop the remaining references now. Signed-off-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49329 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: fix ip6_tunnel compilationLuka Perkov2016-06-191-2/+2
| | | | | | | | Replace undefined iph for ip_hdr(skb) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49328 3c298f89-4303-0410-b956-a3cf2f4a3e73
* image / basefiles: make console password configurableluka2016-06-1918-39/+39
| | | | | | | Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> Signed-off-by: John Crispin <john@phrozen.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49325 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86: search PARTUUID in any block deviceLuka Perkov2016-06-191-1/+2
| | | | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49319 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86: make sysupgrade work without partxLuka Perkov2016-06-191-6/+28
| | | | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49318 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update kernel 4.1 to version 4.1.23Rafał Miłecki2016-06-197-13/+13
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49296 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Drop hacky switch workaround for failsafe on rt3x5x and rt5350.John Crispin2016-06-191-28/+9
| | | | | | | | | | | | The new rt3050 switch driver doesn't have problems with TCP when not using VLANs. This piece of code also broke failsafe for all routers where the LAN port is not wired to port 0 of the internal switch. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49293 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Disable all ethernet ports except port 0 on A5-V11.John Crispin2016-06-191-1/+2
| | | | | | | | | Port 0 is the only ethernet port on this router, so disable all other PHYs in order to save power. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49292 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Disable all ethernet ports except port 4 on HT-TM02.John Crispin2016-06-191-0/+1
| | | | | | | | | Port 4 is the only ethernet port on this router, so disable all other PHYs in order to save power. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49291 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Get rt3050 ethernet ports to be disabled from the device tree.John Crispin2016-06-191-0/+81
| | | | | | | | | | | | | | | This patch allows configuring ports to be disabled in the device tree; this saves power, since disabling ports here actually disables power to ethernet PHYs. Line 444 enables all ethernet ports, so line 487 is getting zero ports to be disabled, except for port 5 in SoCs where this is not implemented as it will be sticky disabled in register POC0. Because of this, the code will still read the switch configuration and OR it to the device tree setting. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49290 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 19:48:06 +0000