aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* ramips: improve i2s driversMichael Lee2016-07-041-461/+742
| | | | | | | | | | | | | | | * remove mt7620-wm8960.c use simple card and DTS to do it * add old chips support * add 12Mhz refclk setup. this is hard code. need use clock framework rewrite it * add interrupt error status support for debug. default disable it. because it cause to many interrupts * add setup bclk suport not hard code it * add 24 bits support for mt7628. not verified * use regmap api to control registers * add txdma-req/rxdma-req DTS params for DMA use Signed-off-by: Michael Lee <igvtee@gmail.com>
* ramips: add i2c clockMichael Lee2016-07-041-0/+40
| | | | Signed-off-by: Michael Lee <igvtee@gmail.com>
* ramips: update i2c dtsi filesMichael Lee2016-07-048-17/+127
| | | | Signed-off-by: Michael Lee <igvtee@gmail.com>
* kernel: refresh patchesFelix Fietkau2016-07-044-28/+24
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: backport cosmetic ubifs patchDaniel Golle2016-07-041-0/+42
| | | | | | | | | | | | | | | Despite the MS_SILENT flag being set when probing for ubifs rootfs a logline indicating an error is generated during boot: UBIFS error (pid: 1): cannot open "ubi0:rootfs", error -19 This leads to confusion and there shouldn't be lines containing the word 'error' twice in a bootlog if actually everything is fine (just the rootfs happens to be something else than ubifs) The patch added has been submitted and was accepted upstream, see: http://lists.infradead.org/pipermail/linux-mtd/2016-June/068056.html http://patchwork.ozlabs.org/patch/637491 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* sunxi: remove NAMESPACES config symbolsDirk Neukirchen2016-07-011-4/+0
| | | | | | they are available in config/Config-kernel.in Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
* omap: remove NAMESPACES config symbolsDirk Neukirchen2016-07-011-3/+0
| | | | | | they are available in config/Config-kernel.in Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
* omap: remove XFRM config symbolsDirk Neukirchen2016-06-301-2/+0
| | | | Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
* omap: remove config symbol W1Dirk Neukirchen2016-06-301-1/+0
| | | | | | it is available as module Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
* omap: switch to 4.4Alexander Couzens2016-06-302-100/+62
| | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* omap: remove BMP085 symbolDirk Neukirchen2016-06-301-2/+0
| | | | | | BMP085 is a pressure sensor and available as module Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
* zynq: remove unneeded _DIAG and _XFRM symbolsDirk Neukirchen2016-06-301-7/+0
| | | | Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
* sunxi: remove XFRM_ config symbolsDirk Neukirchen2016-06-301-2/+0
| | | | | | they are part of packages Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
* octeon: fix image buildJo-Philipp Wich2016-06-271-1/+1
| | | | | | | | | | | The generic sysupgrade image attempted to use the wrong filesystem type due to premature variable interpolation leading to the following error on the buildbot system: cp: cannot stat `.../root.squashfs': No such file or directory make[4]: *** [.../tmp/lede-octeon-generic-ext4-sysupgrade.tar] Error 1 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* octeon: export the FILESYSTEMS variable during image generationJohn Crispin2016-06-271-1/+1
| | | | | | squashfs will be used for all images if this is not done Signed-off-by: John Crispin <john@phrozen.org>
* octeon: Ignore MEM boot param when too smallMichał Osowiecki2016-06-271-0/+31
| | | | | | | | Cisco RV0XX u-boot sets MEM=2048 as boot param. We assume that at least 4MB (mem_alloc_size) of ram is needed to run linux on cavium boards, so if mem < 4M - ignore it and set default value Signed-off-by: Michał Osowiecki <michal.osowiecki@gmail.com>
* octeon: convert to new image building codeJohn Crispin2016-06-272-50/+41
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* cns3xxx: fix RX softIRQ loopKoen Vandeputte2016-06-271-2/+2
| | | | | | | | | | Already reschedule when 1 or more frames came in. Checking for a full queue could produce a re-schedule loop as the checked RX ring location could contain undefined values depending on activity in previous loops. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: mtdsplit: calculate kernel partition precisely for SeamaRafał Miłecki2016-06-271-2/+2
| | | | | | | | | So far "kernel" partition didn't contain just a kernel. It also included Seama header and meta data. This was making kernel update complex and it wasn't trivial to read kernel size. Fix it by making "kernel" parition contain just a kernel image. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* brcm63xx: simplify block size and image offset optionsÁlvaro Fernández Rojas2016-06-271-34/+45
| | | | | | | | Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: add sysupgrade imagesÁlvaro Fernández Rojas2016-06-272-20/+31
| | | | | | | | | | Some devices require padded images in order to prevent CFE from flashing them to the wrong offset. For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this implies 8 and 16 MB images, which is way too large and some devices aren't capable of flashing them through sysupgrade. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: merge DSL-274X-F1 profilesJonas Gorski2016-06-271-16/+6
| | | | | | | The only difference is a field in the image tag header, so just define two images for it instead of treating them as separate devices. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: move the bootargs into the dtb filesJonas Gorski2016-06-2784-3/+334
| | | | | | Instead of using a fixed commandline, allow one per device. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: use upstreamed compatible name for the periph intcJonas Gorski2016-06-2711-11/+11
| | | | | | | This makes the eventual migration to bmips easier, as dts files will require less changes. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: fix external IRQsDaniel Gonzalez2016-06-271-9/+9
| | | | | | | | | | | | | External IRQs are currently broken, fix the BCM6345_EXT_IRQ driver. Since the adoption of the new driver irq-bcm6345-ext, in Chaos Calmer, external IRQs don't work. It seems there were some minor errors at the initial development of the driver. This patch fixes the ticket https://dev.openwrt.org/ticket/21613 Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: fix single profile selectionÁlvaro Fernández Rojas2016-06-271-0/+1
| | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: improve image/MakefileÁlvaro Fernández Rojas2016-06-271-2/+1
| | | | | | | - Use KERNEL_INITRAMFS_SUFFIX for customizing initramfs name. - Modifying $(PROFILES) is no longer needed. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: fix typo image/MakefileÁlvaro Fernández Rojas2016-06-271-1/+1
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: add initial support for Netgear EVG2000Graham Fairweather2016-06-278-1/+195
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Netgear EVG2000 VoIP Gateway to the bcm63xx targets. This device was not sold to the general public, but rather is/was provided by telcos to customers in Sweden, Australia, Singapore and other parts of asia. Known issues: - Unable to detect 53115 switch. This appear to be a problem with probing for the PHY using MDIO and results in error 5. Doesn't seem to be a problem with the configuration, and could use someone with experience to have a look at it. - Uses the b43 driver as using the OpenWRT/LEDE broadcom-wl driver fails to load the firmware for the 4322, so 802.11n is not supported. More info on the device and the research can be found at: https://wiki.openwrt.org/toh/netgear/evg2000 https://wikidevi.com/wiki/Netgear_EVG2000 https://github.com/Xotic750/mirror-lede/tree/evg2000 https://forum.openwrt.org/viewtopic.php?id=63950 Signed-off-by: Graham Fairweather <xotic750@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: set DSL-274XB-F1 ath9k LED as active highÁlvaro Fernández Rojas2016-06-2735-102/+103
| | | | | | D-Link DSL-274XB rev F1 has an active high ath9k LED. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: set HG556a A/B ath9k LED as active highÁlvaro Fernández Rojas2016-06-2724-61/+63
| | | | | | Huawei HG556a has an active high ath9k LED. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: add support for inverting ath9k LED polarityÁlvaro Fernández Rojas2016-06-272-9/+12
| | | | | | | Some devices with ath9k WiFi require changing the default active low polarity to high in order to correctly operate the WiFi status LEDs. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: move profiles definitions to image/MakefileÁlvaro Fernández Rojas2016-06-2728-1359/+1072
| | | | | | This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: refresh kernel patches and configÁlvaro Fernández Rojas2016-06-274-12/+19
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: switch to linux 4.4Álvaro Fernández Rojas2016-06-271-1/+2
| | | | | | Boot tested on AR-5381u, AR-5387un and WAP-5813n Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: fix F@ST2704V2 image generationÁlvaro Fernández Rojas2016-06-271-1/+1
| | | | | | This device needs the firmware padded to 4MB. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm53xx: backport BCM5301X patches for SRABRafał Miłecki2016-06-275-1/+170
| | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* bcm53xx: properly support sysupgrade using Seama on NAND devicesRafał Miłecki2016-06-271-1/+48
| | | | | | It updates kernel and then formats UBI without loosing erase counters. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* bcm53xx: use uncompressed zImagesFelix Fietkau2016-06-271-0/+2
| | | | | | The boot loader expects LZMA compressed kernel images Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm53xx: refresh kernel configFelix Fietkau2016-06-271-5/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm53xx: refresh kernel configRafał Miłecki2016-06-271-5/+0
| | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* bcm53xx: sysupgrade: move TRX specific code to separated functionRafał Miłecki2016-06-271-14/+20
| | | | | | | This will allow adding support for other formats (e.g. Seama) in a clean way. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* bcm53xx: pass datasize to mtd in hexadecimal formatRafał Miłecki2016-06-271-2/+1
| | | | | | This avoids extra calculation in bash script. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* bcm53xx: fix partition typos in 09_fix_crcRafał Miłecki2016-06-271-1/+1
| | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* bcm53xx: calculate TRX CRC32 using whole kernel partitionRafał Miłecki2016-06-271-1/+6
| | | | | | This provides better protection of flash data. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* kernel: add missing config symbols for 4.4Jo-Philipp Wich2016-06-261-0/+3
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* x86: lift generic x86-32 targetDaniel Golle2016-06-252-17/+136
| | | | | | | | | * build for pentium4 instead of i486 * enable PAE * enable EFI support * enable KVM guest and host support Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* x86: reorganize x86_32 supportDaniel Golle2016-06-254-1/+238
| | | | | | copy current 'generic' target to new 'legacy' target. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* x86: use sysfs DMI information to populate sysinfoJo-Philipp Wich2016-06-251-0/+28
| | | | | | | | | | | | | | | | | | Use the DMI data available in sysfs to extract manufacturer and model info and write it to /tmp/sysinfo/. The data will be picked up by board_detect and can be used by e.g. LuCI to display a more appropriate model description. On an APU board the files will contain the following values: # cat /tmp/sysinfo/model PC Engines APU # cat /tmp/sysinfo/board_name pc-engines-apu Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* x86: enable DMI and DMI_SYSFSJo-Philipp Wich2016-06-253-12/+6
| | | | | | | | | | Enable support for DMI decoding in the kernel so that we can access manufacturer and model information via sysfs. Also remove redundant per-subtarget DMI overrides and preset a few previously unset symbols popping up due to the now enabled DMI support. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-07 17:31:39 +0000