aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: add model detection for the MERCURY MW4530R boardGabor Juhos2013-07-281-0/+3
| | | | | | | | | | | | Mercury MW4530R is a TP-Link TL-WDR4310 clone but with a much lower price tag (~ $40). This patch is tested to work at trunk r37525. Signed-off-by: Leon Xu <ylxu72@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3856/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37570 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: TEW632BRP has buttons 'active low', fix board configGabor Juhos2013-07-281-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Looks like trunk@37090 has changed the logic that determines if router's button was pressed. This resulted in TEW632BRP always booting into failsafe mode because it detected pressed button (which was not pressed). Measure with voltmeter has shown that buttons on this router are actually active-low. This patch reflects this fact in board configuration and fixes 'load info failsafe mode' issue. Note: it looks like Trendnet TEW632BRP and a close relative to TEW-652BRP V1.0 and D-Link DIR-615C1, so same problem may exist on those routers as well. This patch doesn't affect routers other than 632BRP and unfortunately I do not have hardware to test this issue with other routers. This patch fixes #13893 and is tested on actuall Trendnet TEW632BRP. Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37569 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add MPR-A1 supportJohn Crispin2013-07-2710-0/+143
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37568 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: gpio driver should not set gpio to input when irq is queriredJohn Crispin2013-07-271-16/+24
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37567 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add back dwc_otg driverJohn Crispin2013-07-272-0/+24538
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37566 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: MPR-A2 should use memory auto detectionJohn Crispin2013-07-271-4/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37565 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: enable usb phy support on rt5350John Crispin2013-07-271-0/+10
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37564 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: switch back to dwc_otg ... dwc2 seems to not work well with 3G modemsJohn Crispin2013-07-2713-15/+15
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37563 3c298f89-4303-0410-b956-a3cf2f4a3e73
* strict_strtoul is obsolete, use kstrtoul insteadJohn Crispin2013-07-2711-51/+51
| | | | | | | | based on http://patchwork.openwrt.org/patch/3827/ Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37562 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: unbreak asiarf dts filesJohn Crispin2013-07-263-6/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37561 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add profile and fixup image generation for the TL-MR10U boardGabor Juhos2013-07-262-1/+12
| | | | | | | | | | | | | | | Create a separate board profile and update the profile name in image/makefile. Also use the correct machtype string in kernel command line. Based on andelf's patch: http://andelf.diandian.com/post/2013-05-22/40050677370 Signed-off-by: Oleg Titov <oleg.titov@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3840/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37550 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user-space support for the TL-MR10U boardGabor Juhos2013-07-264-0/+6
| | | | | | | | | | | Based on andelf's patch: http://andelf.diandian.com/post/2013-05-22/40050677370 Signed-off-by: Oleg Titov <oleg.titov@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3840/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37548 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add kernel support for the TL-MR10U boardGabor Juhos2013-07-262-3/+39
| | | | | | | | | | | | | | Based on andelf's patch: http://andelf.diandian.com/post/2013-05-22/40050677370 [juhosg: extend WR703N code to handle the TL-MR10U instead of adding a separate mach-tl-mr10u file]] Signed-off-by: Oleg Titov <oleg.titov@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3840/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37547 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update 3.10 to 3.10.3Gabor Juhos2013-07-2635-187/+63
| | | | | | | | Also refresh 3.10 patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37546 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: remove stale phy register setup properties from dts filesJohn Crispin2013-07-254-15/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37544 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: add TP-Link TDW8970 image generationJohn Crispin2013-07-251-0/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37543 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: add profile for TP-Link TDW8970John Crispin2013-07-251-0/+11
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37542 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: add devicetree for TP-Link TDW8970John Crispin2013-07-251-0/+248
| | | | | | Signed-of-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37541 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: fix initramfs image generation for lzmaloader based imagesJohn Crispin2013-07-251-4/+10
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37540 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: make macs loadable from mtd partitionsJohn Crispin2013-07-251-34/+72
| | | | | | | | This is a really ugly hack but it will have to do until we copy the ramips patches to the lantiq tree Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37539 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: add a hook to make leds work on the secondary usb busJohn Crispin2013-07-251-1/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37538 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: update pcie driverJohn Crispin2013-07-251-1049/+1895
| | | | | | | | This is an intermediate commit until the new OF driver is functional. Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37537 3c298f89-4303-0410-b956-a3cf2f4a3e73
* xburst: Add missing kernel config symbolLars-Peter Clausen2013-07-251-0/+1
| | | | | | | Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37534 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: disable hg255dJohn Crispin2013-07-251-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37532 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramipe: disable HG255D supportJohn Crispin2013-07-251-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37531 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: important patch for HG255DJohn Crispin2013-07-252-2/+8
| | | | | | | | | | r37505 add support for Huawei HG255D, but it only tested under a community hacked u-boot ("lintel u-boot"), which has a different mtd layout compared to origin one. If you install it on a box with origin u-boot, the origin factory part will be destroyed, and your wifi interface will never up!!! This patch shrink firmware part in mtd layout to exclude origin factory part, and I will prepare another patch to fix the eeprom extract issue for box with origin u-boot. Signed-off-by: Leon Xu <ylxu72@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37530 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Basic support for the AsiaRF RT5350 based AWM002 module and ↵John Crispin2013-07-2412-0/+231
| | | | | | | | | | | evaluation board. Basic support for the AsiaRF RT5350 based AWM002 module and evaluation board. http://www.asiarf.com/Smallest-Tiny-Ralink-802-11n-Wireless-AP-Router-Module-Board-AWM002-product-view-375.html Signed-off-by Jon Smirl <jonsmirl@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37521 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix HG255D VLAN initial detect issueJohn Crispin2013-07-231-0/+1
| | | | | | Signed-off-by: Leon Xu <ylxu72@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37517 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux/atheros: add 3.10 kernel supportJohn Crispin2013-07-2214-0/+6562
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37513 3c298f89-4303-0410-b956-a3cf2f4a3e73
* xburst: Unmark brokenLars-Peter Clausen2013-07-221-1/+1
| | | | | | | | | 3.10 support is working fine for this platform, so unmark it broken. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37512 3c298f89-4303-0410-b956-a3cf2f4a3e73
* xburst: Remove 3.8 supportLars-Peter Clausen2013-07-2216-4561/+0
| | | | | | | | | 3.8 support for this platform is broken, so remove it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37511 3c298f89-4303-0410-b956-a3cf2f4a3e73
* xburst: Add 3.10 supportLars-Peter Clausen2013-07-2217-0/+5427
| | | | | | | | | Missing files from the previous commit. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37510 3c298f89-4303-0410-b956-a3cf2f4a3e73
* xburst: Add 3.10 supportLars-Peter Clausen2013-07-221-1/+1
| | | | | | | Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37509 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix switch port map for the Archer C7Gabor Juhos2013-07-221-2/+8
| | | | | | | | | | | The correct port number for the WAN port is 1. Update the VLAN port maps to reflect that. https://forum.openwrt.org/viewtopic.php?pid=203755#p203755 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37507 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel/3.10: rework MIPS FPU emulation disable patchGabor Juhos2013-07-221-124/+78
| | | | | | | | | Get rid of some ifdefs, and make sure that the microMIPS specific code is disabled as well. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37506 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Add support for Huawei HG255D in trunkJohn Crispin2013-07-228-1/+156
| | | | | | | | | | HG255D is a kind of popular low-end home gateway in China, this patch bring the the trunk support for it. It is adapted from a local Chinese community (www.right.com.cn), so credit should given to them. This patch is tested to work except trivial LED issues. Signed-off-by: Leon Xu <ylxu72@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37505 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update 3.10 to 3.10.2Gabor Juhos2013-07-2299-1287/+712
| | | | | | | | Also refresh 3.10 patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37502 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update 3.9 to 3.9.11Gabor Juhos2013-07-225-9/+9
| | | | | | | | Also refresh 3.9 patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37501 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: set remove dwc_otg from default packages and use dwc2 insteadJohn Crispin2013-07-2213-15/+15
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37499 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: remove dwc_otg from modules.mkJohn Crispin2013-07-221-20/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37498 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: set v3.10 as defaultJohn Crispin2013-07-2272-46241/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37497 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: fix crash in act_connmark in 3.9 and 3.10 (fixes #13916, #13876)Felix Fietkau2013-07-212-24/+46
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37493 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add missing config option CONFIG_SND_MXS_SOCHauke Mehrtens2013-07-211-0/+1
| | | | | | | | | This is needed by imx23 target. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37492 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add a new global config symbol for enabling rfkill support (can be ↵Felix Fietkau2013-07-211-0/+3
| | | | | | | | enabled by default via target feature flag) Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37491 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: Remove gpio-pwm patchesLars-Peter Clausen2013-07-2114-1076/+4
| | | | | | | | | | There is no platform using the gpio-pwm driver, yet these patches break the generic PWM framework that is in upstream. So just remove them. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37490 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: merge a proposed fix from LKML for fixing infinite data returned by ↵Felix Fietkau2013-07-201-0/+45
| | | | | | | | /proc/timer_list Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37484 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm63xx: add linux 3.10 supportJonas Gorski2013-07-20128-0/+15510
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37481 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Revert "ar71xx: override cpu_has_mmips feature"Gabor Juhos2013-07-201-4/+3
| | | | | | | | | This reverts r37477. A generic patch is used to fix this globally, so revert the ar71xx specific change. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37480 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel/3.10: add a generic patch for cpu_has_mmips overrideGabor Juhos2013-07-201-0/+45
| | | | | | | | | | Backport of commit 3ddc14add5e6341cf8ef4058c34c67ba7fd15317 from 3.11-rc1 Suggested-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37479 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel/3.10: make emulate_load_store_microMIPS staticGabor Juhos2013-07-201-0/+32
| | | | | | | | | | | | This allows the compiler to remove the emulate_load_store_microMIPS function if cpu_has_mmips is defined as zero. Backport of commit 74338805ec6869594d583535f941cb478c94dd73 from 3.11-rc1. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37478 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 08:11:45 +0000