aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
...
* lantiq: Use the new pinctrl compatible stringsFelix Fietkau2016-01-174-4/+4
| | | | | | | | | | | | | | | | These were introduced in upstream commit be14811c03cf "pinctrl/lantiq: introduce new dedicated devicetree bindings" and finally allow us to use the individual pins within our dts (for example spi_clk, etc.). Please note that this changes the number of GPIOs which are available for some SoCs. VRX200 SoCs for example only have 50 pins, but previously 56 pins were exposed. This means that all places which are using hardcoded GPIO numbers (which are not passed via device-tree) need to be adjusted (because the first GPIO number is now 462, instead of 456). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48284 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: Backport upstream pinctrl-xway patches from 4.5Felix Fietkau2016-01-175-28/+1436
| | | | | | | | | | | | | | | | Upstream commit be14811c03cf2 "pinctrl/lantiq: introduce new dedicated devicetree bindings" allows us to use each pin in the pinmux. This is useful for example in the "spi" group which contains some pins which are inputs, and some which are outputs. These can only be used once the new compatible strings for the pinctrl node are used. Additionally 0150-lantiq-pinctrl-xway.patch and the "GPIO PORT3 fix" (which was part of 0012-pinctrl-lantiq-fix-up-pinmux.patch) were replaced with their upstream variants which are also in 4.5. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48283 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx/lzma-loader: fix O32 ABI conformanceGabor Juhos2016-01-171-0/+3
| | | | | | | | | | | | | | | | | | | | | | According to the calling convention of the o32 ABI the caller function must reserve stack space for $a0-$a3 registers in case the callee needs to save its arguments. The assembly code of the loader does not reserve stack space for these registers thus when the 'loader_main' function needs to save its arguments, those will be stored in the 'workspace' area instead of the stack. Because the workspace area is also used by other part of the code, the saved register values gets overwritten and this often leads to failed kernel boots. Fix the code to reserve stack space for the registers to avoid this error. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48279 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Use full 128MB flash on Netgear WNDR4300 and WNDR3700v4Felix Fietkau2016-01-171-1/+1
| | | | | | | | | | Change MTD on WNDR4300 and WNDR3700v4 to fully utilize the 128MB flash. Credit to @Tuochenlyu on GitHub. Signed-off-by: Chris Marchesi <chrism@vancluevertech.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48276 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mpc85xx: Add PTP node for TL-WD4900 in device treeFelix Fietkau2016-01-171-0/+13
| | | | | | | | | | | | PTP requires at least one timer to be 1PPS so describe it. For testing, load kernel module gianfar_ptp and use ptp4l from linuxptp. Copied from FSL P1010RDB reference design. Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48275 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: Fixed brnImage signature for the VGV7510KW22BRN imagesFelix Fietkau2016-01-171-1/+1
| | | | | | | | | | | | | The old signature only worked because brnboot ignores the leading "5" in the signature. We can see the correct signature when flashing a brnImage via recovery web-interface, in this case brnboot reports: [CGI-Signature Check] buf:[BRNDA6431], sigInFlash:[BRNDA6431] Thanks to Mathias Kresin for reporting this. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48269 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar8327: add IGMP Snooping supportFelix Fietkau2016-01-172-0/+232
| | | | | | | | | | | | | | | This add support for IGMP Snooping on atheros switches (disabled by default), which avoids flooding the network with multicast data. Tested on TL-WDR4300: disabling IGMP Snooping results in multicast flooding on each specific port, enabling it back again prevents each port from receiving all multicast packets. Partially based on: http://patchwork.ozlabs.org/patch/418122/ Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48268 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm2708: add linux 4.4 supportFelix Fietkau2016-01-17127-11/+141130
| | | | | | | | | | | | | - random-bcm2708 and spi-bcm2708 have been removed. - sound-soc-bcm2708-i2s has been upstreamed as sound-soc-bcm2835-i2s. Let's keep linux 4.1 for a while, since linux 4.4 appears to have some issues with multicast traffic on RPi ethernet: https://gist.github.com/Noltari/5b1cfdecce5ed4bc08fd Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48266 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uml: update to linux 4.4Felix Fietkau2016-01-178-180/+52
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48265 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: Switch to the generic mtdsplit parser implementationsFelix Fietkau2016-01-172-192/+3
| | | | | | | | | This removes the arch-specific mtdsplit parsers and enables the generic implementations for brnImage, EVA and TP-Link instead. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48264 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: mtdsplit_squashfs: Align with the erase-block sizeFelix Fietkau2016-01-171-1/+1
| | | | | | | | | | | | | | On most image types the rootfs ends at an erase-block. However, at least with brnImages this is not the case: while the partitions are aligned with the erase-block size there is a 12 byte footer at the end of the partition which must not be touched by any filesystem. This lead to a rootfs_data partition which was not aligned properly (and thus ended up being readonly): 0x000000480000-0x00000085a800 : "rootfs_data" (128 KiB EB) Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48263 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: mtdsplit: add support for EVA imagesFelix Fietkau2016-01-177-0/+106
| | | | | | | | | This allows splitting EVA images (usually found in fritz devices). The firmware will be split into a kernel and a separate rootfs partition. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48262 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: mtdsplit: add support for brnImagesFelix Fietkau2016-01-177-0/+114
| | | | | | | | | | | | | | | | | This adds brnImage (used with the brnboot bootloader) firmware parsing support. brnboot verifies the integrity of the firmware stored on the "Code Image" partitions by looking at the 12 byte footer at the very end of the partition. This footer contains the checksum of the original brnImage (kernel + rootfs/squashfs) and must not be touched (by our JFFS2 rootfs_data - otherwise the image will not be bootable anymore). Big thanks to Mathias Kresin for analyzing the brnImage structure and finding out the information how to keep images valid even when adding a nested rootfs_data partition. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48261 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: disable bogus DEVTMPFS config overridesFelix Fietkau2016-01-174-5/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48260 3c298f89-4303-0410-b956-a3cf2f4a3e73
* imx6: kernel: Add Micrel PHY used on Apalis SOMFelix Fietkau2016-01-151-0/+1
| | | | | | | Signed-off-by: Petr Štetiar <ynezz@true.cz> Cc: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48249 3c298f89-4303-0410-b956-a3cf2f4a3e73
* imx6: add 4.4 supportFelix Fietkau2016-01-1518-0/+2922
| | | | | | | | | | | | | | Build and boot tested on the following hardware: * GW54xx * GW53xx * GW52xx * GW51xx * GW552x * GW551x Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48248 3c298f89-4303-0410-b956-a3cf2f4a3e73
* arc770: move arc patches to target/linux/genericFelix Fietkau2016-01-152-0/+0
| | | | | | | | | | | | | | | | Given those patches are relevant to any ARC platform and even ISA version it makes perfect sense for patches to exist in one place instead of being duplicated for each new ARC-based ASIC. Note this is a prerequisite for upstreaming of ARC HS38 support in OpenWRT. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48241 3c298f89-4303-0410-b956-a3cf2f4a3e73
* arc770: bump linux kernel from 4.3 to 4.4Felix Fietkau2016-01-158-25/+30
| | | | | | | | | | | | | | | | This switch involved: [1] Regeneration of config (few options went away) [2] Regeneration of patches so they apply cleanly (different offsets) [3] Update of .dts files because we now explicitly specify memory regions in use as opposed to previously used offset from 0x8000_0000 Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48240 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: compile out SNMP MIB related counting if debloat-proc is active - ↵Felix Fietkau2016-01-153-0/+132
| | | | | | | | improves network stack performance Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48239 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: backport perf build fixes to 4.1Felix Fietkau2016-01-142-0/+81
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48231 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: remove obsolete config symbols from 4.4Felix Fietkau2016-01-141-292/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Only remove old symbols for 4.4 since older Kernels might be removed sooner/later and 4.4 is the next LTS build tested against: omap 4.4 CONFIG_ALL_KMODS x86_64 List of enabled & orphaned symbols: -CONFIG_ARPD=y -CONFIG_BT_L2CAP=y -CONFIG_BT_SCO=y -CONFIG_CAVIUM_OCTEON_HELPER=y -CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 -CONFIG_DISABLE_DEV_COREDUMP=y -CONFIG_EXPERIMENTAL=y -CONFIG_EXT4_FS_XATTR=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_TIME=y -CONFIG_HOTPLUG=y -CONFIG_INITRAMFS_COMPRESSION_NONE=y -CONFIG_INLINE_SPIN_UNLOCK=y -CONFIG_LEDS_GPIO_OF=y -CONFIG_LEDS_GPIO_PLATFORM=y -CONFIG_MFD_SUPPORT=y -CONFIG_MISC_DEVICES=y -CONFIG_MTD_CHAR=y -CONFIG_NETDEV_1000=y -CONFIG_NET_ETHERNET=y -CONFIG_NET_PCI=y -CONFIG_NET_VENDOR_SILICOM=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_UIDGID_STRICT_TYPE_CHECKS=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_EZUSB=y Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48230 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: remove clk_round_rate() patchHauke Mehrtens2016-01-131-43/+0
| | | | | | | | | | This patch was merged into upstream Linux 4.1. This fixes #21587 and was introduced in r48223. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48229 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix ethernet MAC reset on DMA hangFelix Fietkau2016-01-131-38/+55
| | | | | | | | | Fully reset the chip like on a full up/down, but without the PHY statemachine restart. Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48228 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: extend ethernet DMA stuck check to all ar724x (and newer) chipsFelix Fietkau2016-01-131-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48227 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel/3.18: update to version 3.18.25Hauke Mehrtens2016-01-1217-160/+48
| | | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48225 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel/4.3: update to version 4.3.3Hauke Mehrtens2016-01-1238-534/+209
| | | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48224 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel/4.1: update to version 4.1.15Hauke Mehrtens2016-01-1218-226/+42
| | | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48223 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: refresh patches for kernel 4.4Hauke Mehrtens2016-01-1244-196/+97
| | | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48222 3c298f89-4303-0410-b956-a3cf2f4a3e73
* pxa: moved to targets feedFelix Fietkau2016-01-1218-3508/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48217 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86: update to linux 4.4Felix Fietkau2016-01-129-73/+173
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48216 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add missing symbols for linux 4.4Felix Fietkau2016-01-121-0/+5
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48215 3c298f89-4303-0410-b956-a3cf2f4a3e73
* sdk: add base repository fallbackJo-Philipp Wich2016-01-121-0/+1
| | | | | | | | | | | | | | When the build system cannot infer its own repository url then let it fall back to http://git.openwrt.org/ for the base feed. The path to openwrt.git is guessed from the VERSION_NUMBER variable: "unknown" or "r12345" -> http://git.openwrt.org/openwrt.git "15.05.1" -> http://git.openwrt.org/15.05/openwrt.git Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48212 3c298f89-4303-0410-b956-a3cf2f4a3e73
* target/sdk: include modules.builtin, it is necessary for packaging kernel ↵Felix Fietkau2016-01-111-0/+1
| | | | | | | | modules Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48206 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: Update kernel 4.4 to 4.4.0Felix Fietkau2016-01-114-38/+3
| | | | | | | | | | This removes one patch which was applied upstream with commit 67b9bcd36906e12a15ffec19463afbbd6a41660e. All other patches were refreshed. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48203 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86: remove obsolete patchesFelix Fietkau2016-01-107-1031/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48190 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86: remove the rdc subtarget, it was broken for ages and nobody caredFelix Fietkau2016-01-1011-219/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48189 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix ap152 supportFelix Fietkau2016-01-103-1/+2
| | | | | | | | | | - ethernet gigabit pll - switch configuration - sysupgrade Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48187 3c298f89-4303-0410-b956-a3cf2f4a3e73
* sunxi: initial 4.4 supportZoltan HERPAI2016-01-0929-0/+4391
| | | | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48161 3c298f89-4303-0410-b956-a3cf2f4a3e73
* sunxi: prep module support options for 4.4Zoltan HERPAI2016-01-091-8/+14
| | | | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48160 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel/4.4: add missing config optionsZoltan HERPAI2016-01-091-0/+39
| | | | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48159 3c298f89-4303-0410-b956-a3cf2f4a3e73
* target/sdk: do not include the target staging dir anymore, it is unnecessary nowFelix Fietkau2016-01-081-2/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48157 3c298f89-4303-0410-b956-a3cf2f4a3e73
* target/sdk: ship .ko files to allow rebuild of the base kmod-* packagesFelix Fietkau2016-01-081-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48156 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: do not rely on $(BIN_DIR) installed files during image build (for ↵Felix Fietkau2016-01-061-3/+3
| | | | | | | | ubnt-erx) Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48147 3c298f89-4303-0410-b956-a3cf2f4a3e73
* targets: add kernel image dependencies on device tree filesFelix Fietkau2016-01-066-0/+6
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48146 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: do not attempt to build ubnt-erx initramfs image if initramfs ↵Felix Fietkau2016-01-061-1/+1
| | | | | | | | support is disabled Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48144 3c298f89-4303-0410-b956-a3cf2f4a3e73
* swconfig: add API for setting port link speedRafał Miłecki2016-01-062-1/+50
| | | | | | | | | Some switches can force link speed for a port. Let's add API that will allow drivers to export this feature. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48142 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix duplicate /dts-v1/ line for WRTNODE2Felix Fietkau2016-01-061-2/+0
| | | | | | Signed-off-by: Noble Pepper <openwrtmail@noblepepper.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48138 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: set mips16 supportFelix Fietkau2016-01-041-1/+1
| | | | | | Signed-off-by: Cristian Morales Vega <cristian@samknows.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48131 3c298f89-4303-0410-b956-a3cf2f4a3e73
* sunxi: fix Lamobo R1 board detectionZoltan HERPAI2016-01-041-1/+1
| | | | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48130 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add a few mt7688 fixes that got lost in the v4.3 bumpJohn Crispin2016-01-041-0/+89
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48115 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-11 23:06:31 +0000