aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* sunxi: add descriptor files for wifi+bt modules (AP6181/6210), add brcmfmac ↵Zoltan HERPAI2016-02-243-1/+110
| | | | | | | | | | to bananapro profile Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48757 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: replace bgmac patches for BCM47094 with final onesRafał Miłecki2016-02-245-41/+57
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48756 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: mtdsplit: support uimage with UBIRafał Miłecki2016-02-241-3/+7
| | | | | | | | This patch adds uimage firmware split support for ubi. Signed-off-by: YounJae Rho <luxflow@live.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48755 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: mtdsplit: add missing digest field to Seama headerRafał Miłecki2016-02-231-0/+1
| | | | | | | | | | | | | | | | | | | Seama format has 2 similar headers: container (seal) header and entity header. The first one has size always set to 0 and doesn't contain MD5 digest. When dealing with Seama on a flash we deal directly with an entity. You can see mtdsplit_parse_seama reads from offset 0 and expects entity to be there. Seama container is used by bootloader / interface only which extract entity out of it and flash it. That said we should fix our header struct. This is important as we calculate possible rootfs offset assuming it may be placed right after Seama entity. So far calculate offset was always 16B too low. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48754 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: reset ethernet tx ring on fast reset to prevent packet loss / irq issuesFelix Fietkau2016-02-221-3/+11
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48753 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix WSR-1166 partition tableFelix Fietkau2016-02-221-2/+2
| | | | | | | | | - Fix typo in board_data partition start address - Increase board_data partition size in order to exploit all flash size Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48751 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: fix mt7628 ehci supportJohn Crispin2016-02-192-7/+61
| | | | | | | | the u2_phy init was missing Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48747 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: unbreak port4 on mt7620John Crispin2016-02-191-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48746 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add missing symbol to Linux 4.4 config (#21878)Jo-Philipp Wich2016-02-181-0/+1
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48742 3c298f89-4303-0410-b956-a3cf2f4a3e73
* archs38: remove network config overrideJohn Crispin2016-02-181-3/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48741 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux: add support of Synopsys ARCHS38-based boardsJohn Crispin2016-02-1817-0/+887
| | | | | | | | | | | | | | | | | | | | | | This patch introduces support of new boards with ARC HS38 cores. ARC HS38 is a new generation of ARC cores which utilize ARCv2 ISA. As with ARC770 we're addind support for 2 boards for now: [1] Synopsys SDP board (AXS103) This is the same base-board as in AXS101 but with FPGA-based CPU-tile where ARCHs38 core is implemented. [2] nSIM Again this is the same simulation engine but configured for new instruction set and features of new CPU. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48740 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mvebu: add SolidRun ClearFog A1 supportLuka Perkov2016-02-178-0/+640
| | | | | | Signed-off-by: Andrej Vlasic <andrej.vlasic@sartura.hr> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48736 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add missing symbols to config-4.4John Crispin2016-02-161-0/+5
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48730 3c298f89-4303-0410-b956-a3cf2f4a3e73
* at91: udc driver was missing depsJohn Crispin2016-02-161-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48726 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mvebu: add missing symbols.John Crispin2016-02-162-0/+2
| | | | | | | | this broke full builds of the mvebu target Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48725 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Add support for Phicomm PSG1208John Crispin2016-02-158-1/+142
| | | | | | | | | | This patch adds support for Phicomm PSG1208.This is a router with MT7620A SoC with 8M flash and 64M ram. The WPS led is uesd as status_led because the power light can't be controlled with GPIO. It seems that the 5g wifi led is connected to MT7612E and it can't be controlled with GPIO too. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48721 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add missing kernel symbol (#21849)Jo-Philipp Wich2016-02-124-2/+4
| | | | | | | | Also reorder subtarget kernel configs. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48717 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Support LEDs on D-Link DIR-860L B1John Crispin2016-02-121-0/+20
| | | | | | | | Adds the required gpio definitions. Signed-off-by: Johannes Wienke <languitar@semipol.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48715 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Support for Ubiquiti UniFi AP AC LITEJohn Crispin2016-02-1213-2/+154
| | | | | | | Add support for the Ubiquiti UniFi AP AC LITE Signed-off-by: P.Wassi <p.wassi at gmx.at> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48711 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Make code formatting consistent on ath79/machtypes.hJohn Crispin2016-02-121-10/+10
| | | | | | Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48706 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Added support for TL-WA801NDv3John Crispin2016-02-128-3/+160
| | | | | | Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48705 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: WNR2000v3: exclude USB modules from imageJohn Crispin2016-02-121-0/+1
| | | | | | | | | Netgear WNR2000v3 has no USB port yet default system image includes USB kernel modules. This patch fixes that. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48701 3c298f89-4303-0410-b956-a3cf2f4a3e73
* use "-gt" instead of ">" with [ in /lib/functions/lantiq_dsl.shJohn Crispin2016-02-121-2/+2
| | | | | | | | | Avoids inadvertent file creation when executing `/etc/init.d/dsl_control status`. Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48700 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Add support for Netgear EX2700John Crispin2016-02-128-1/+177
| | | | | | | | | | | | | | | | This patch adds support for the Netgear EX2700 and builds an approriate sysupgrade image. What's missing is the option to build a factory image flashable via the router's stock web interface, but this approach is hindered by the fact that u-boot operforms an additional integrity check, which expects a uImage header in the last 64 bytes of the "kernel" partition, which the bootloader expects to be 960k, a size exceeded by the standard OpenWrt kernel. Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48698 3c298f89-4303-0410-b956-a3cf2f4a3e73
* zynq: add new targetJohn Crispin2016-02-1210-0/+1101
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Xilinx ZC702 Dev board Zynq target is using 4.4 kernel and mainline 2016.1 u-boot. Patch is tested with Xilinx ZC702 Dev board with SD boot mode. known issues: - no QSPI driver in 4.4 kernel: no QSPI flash support - USB is not working in 4.4 kernel Signed-off-by: Jason Wu <jason.wu.misc@gmail.com> create mode 100644 package/boot/uboot-zynq/Makefile create mode 100644 target/linux/zynq/Makefile create mode 100644 target/linux/zynq/base-files.mk create mode 100755 target/linux/zynq/base-files/etc/board.d/02_network create mode 100644 target/linux/zynq/base-files/etc/config/network create mode 100644 target/linux/zynq/base-files/etc/inittab create mode 100644 target/linux/zynq/config-4.4 create mode 100644 target/linux/zynq/image/Makefile create mode 100755 target/linux/zynq/image/mkits.sh create mode 100644 target/linux/zynq/patches-4.4/0001-arm-dts-zynq-zc702.dts-Set-default-rdinit-to-sbin-in.patch create mode 100644 target/linux/zynq/profiles/zc702.mk git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48697 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ag71xx: fix build error with debugfs codeFelix Fietkau2016-02-111-5/+7
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48695 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ag71xx: increase rx ring size to improve performanceFelix Fietkau2016-02-111-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48694 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ag71xx: store ring size order instead of ring size to avoid div/modFelix Fietkau2016-02-113-41/+58
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48693 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ag71xx: increase tx ring size to improve performanceFelix Fietkau2016-02-111-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48692 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ag71xx: optimize icache footprint of the receive poll functionFelix Fietkau2016-02-111-3/+10
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48691 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: fix uninitialized variable in bridge multicast-to-unicast patch on 4.3Felix Fietkau2016-02-111-2/+5
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48690 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mvebu: fix WRT1900AC v1 LED driver moduleJo-Philipp Wich2016-02-091-1/+1
| | | | | | | | | | | | | Update OpenWRT build tree to reflect changes in TLC-591xx LED family driver. In kernels < 4.0 the driver was present in form of a patch for the TLC-59116 chip, and was upstreamed later in kernels > 4.0 to support the entire chip family. Signed-off-by: Sebastian Careba <nitroshift@yahoo.com> [jow: fix Kconfig symbol name] Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48684 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86: preserve partition table on sysupgradeJo-Philipp Wich2016-02-092-2/+51
| | | | | | | | | | | | | | With this patch sysupgrade will write directly to the partitions instead of to the main disk. The UUID is copied from the image to the MBR as well. This prevents the mbr from being completely overwritten and losing the partition table. The -p option has been added to maintain the original behavior and overwite the entire disk with the new image. Tests have been added to ensure that the image partitions match up with the active partitions. Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48682 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix build error on oversized images by putting the dir-860l-b1 size ↵Felix Fietkau2016-02-081-2/+2
| | | | | | | | check at the end of the chain Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48681 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: add missing kconfig symbolJo-Philipp Wich2016-02-082-0/+2
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48675 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86: remove unrelated config overrideJo-Philipp Wich2016-02-081-1/+0
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48668 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm2708: add missing symbolsJohn Crispin2016-02-084-0/+12
| | | | | | | | | | | | enable CONFIG_PWM enable the RASPI PWM stuff fix buildbot w. 4.1 compile tested only Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48667 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: HLK-RM04 - Enable GPIO14 for WPS buttonJohn Crispin2016-02-084-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The top half of UARTF on the HLK-RM04 is used for GPIO. mode 1 mode 2 RIN GPIO14 DSR_N GPIO13 DCD_N GPIO12 DTR_N GPIO11 RXD GPIO10 CTS_N GPIO09 TXD GPIO08 RTS_N GPIO07 This patch applies 3'b101 mode to UARTF: GPIO14 GPIO13 GPIO12 GPIO11 RXD CTS_N TXD RTS_N Because the base rt5350.dtsi file forces 3'b000 mode, remove the pin setting from this file and apply it directly to the files that inherit from it (WIZFI630A.dts and WT1520.dtsi). This change makes the rt5350.dtsi file consistent with the mt7620a.dtsi file. Signed-off-by: John Clark <inindev@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48665 3c298f89-4303-0410-b956-a3cf2f4a3e73
* rampis: HLK-RM04 - Setup I2C as GPIOJohn Crispin2016-02-081-1/+20
| | | | | | | | | | | | | | | | | | | The I2C function of the RT5350 SoC on the HLK-RM04 is used for GPIO1 and GPIO2. Take note that the I2C_SD pin is GPIO1 on the RT5350 and is exposed on the HLK-RM04 as GPIO0 Likewise the I2C_SCLK pin is GPIO2 on the RT5350 and is exposed on the HLK-RM04 as GPIO1 group mode 1 mode 2 hlk-rm04 pin & export i2c i2c_sd gpio1 (pin 8, hlk-rm04:gpio0) i2c i2c_sclk gpio2 (pin 9, hlk-rm04:gpio1) reference: http://www.hlktech.net/product_detail.php?ProId=39 http://cdn.sparkfun.com/datasheets/Wireless/WiFi/RT5350.pdf Signed-off-by: John Clark <inindev@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48664 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: HLK-RM04 - Fix push button functionsJohn Crispin2016-02-081-3/+7
| | | | | | | | | The RESET button of the HLK-RM04 is connected to GPIO0, linux function 0x198 The WPS button of the HLK-RM04 is connected to GPIO14, linux function 0x211 Signed-off-by: John Clark <inindev@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48663 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: HLK-RM04 - Remove power LED configJohn Crispin2016-02-081-9/+0
| | | | | | | | | The power LED on the HLK-RM04 is hard wired to the power bus and is not under GPIO control, remove the bogus config for it. (Note that GPIO0 is actually connected to the RESET button.) Signed-off-by: John Clark <inindev@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48662 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: VGV7510KW22/VGV7519 update spi pinmux groupJohn Crispin2016-02-082-2/+2
| | | | | | | | | | | | | With the backport of the kernel 4.5 pinctrl-xway patches (3551609d & 826bca29) the pinmux group "spi" was splitted into "spi_di", "spi_do" & "spi_clk". But the no longer existing group "spi" is still used by some device tree source files. This fixes the detection of the wireless chipset of the VGV7510KW22. Signed-off-by: Mathias Kresin <openwrt@kresin.me> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48658 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: BTHOMEHUBV5A - explicit select the flash deviceJohn Crispin2016-02-081-1/+1
| | | | | | | | | | | | | The stock u-boot doesn't disable unused flash banks. Therefore, the nand driver tries to initialize a not connected NOR flash and the device hangs on boot. Workaround the issue by selecting the second flash bank (NAND). Signed-off-by: Mathias Kresin <openwrt@kresin.me> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48657 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: fix wrong parameter order in xway_nand driverJohn Crispin2016-02-081-1/+1
| | | | | | Signed-off-by: Mathias Kresin <openwrt@kresin.me> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48656 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: register only the built-in switch MDIO bus, hook up eth0 to it, ↵Felix Fietkau2016-02-071-1/+2
| | | | | | | | should hopefully fix regression reported in #21520 Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48652 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix MDIO bus probe on QCA956xFelix Fietkau2016-02-071-1/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48651 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fold patch 622-MIPS-ath79-add-support-for-QCA956x-ethernet.patch ↵Felix Fietkau2016-02-073-343/+56
| | | | | | | | into files/ Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48650 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mpc85xx: fix TL-WDR4900 mac address assignment to match original firmwareFelix Fietkau2016-02-072-1/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48645 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: add Netgear R8500 GPIOsRafał Miłecki2016-02-052-2/+78
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48633 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add missing config symbol (#21797)Felix Fietkau2016-02-051-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48632 3c298f89-4303-0410-b956-a3cf2f4a3e73