aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* imx6: convert ventana images to squashfs+ubifs overlayLuka Perkov2015-11-183-111/+285
| | | | | | | | | | | | | | | | | | | | | | Replace the ventana ubi images from a single rootfs volume containing the rootfs as well as kernel+dtbs in the boot/ subdir to a multi-volume ubi containing kernel+dtbs+bootscript in 'root' ubifs volume, rootfs in 'rootfs' squasfs volume, and rootfs_data an empty ubifs volume. At the same time move ventana image creation over to using the new TARGET_DEVICE syntax as a cleanup. Additionally removed FIT image creation as it is recommended that this be done manually to produce signed FIT images if needed. Note that a bootscript is needed for Ventana to change its default mtdparts to rename the 2nd partition from 'rootfs' to 'ubi'. This is because there are patches in OpenWrt kernels that try to auto-attach and auto-mount and these get in the way if the mtd partition is named 'rootfs'. Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47508 3c298f89-4303-0410-b956-a3cf2f4a3e73
* imx6: kernel: add UBI_BLOCK supportLuka Perkov2015-11-181-1/+1
| | | | | | | | UBI_BLOCK support is needed for mounting squashfs over UBI Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47507 3c298f89-4303-0410-b956-a3cf2f4a3e73
* imx6: switch to v4.1Luka Perkov2015-11-181-1/+1
| | | | | | Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47506 3c298f89-4303-0410-b956-a3cf2f4a3e73
* imx6: add Gateworks GW551x supportLuka Perkov2015-11-183-0/+507
| | | | | | | | | | | | | | | | | | | | | | | | | Upstream patch: e9d6d6b62f306ba83e1441af5daf2809a6167474 Add support for the Gateworks GW5510 board featuring: * i.MX6 SoC * up to 512MB DDR3 * up to 2GB NAND flash * 1x miniPCIe socket (with USB) * HDMI out (micro-HDMI) * HDMI in (micro-HDMI) (currently supported by only vendor kernel) * TTL level I/O (supported by GW16111 breakout board): * I2C * 2x UART * CAN * 2x DIO (GPIO/PWM) * USB OTG Also add support to OpenWrt build system Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47505 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: nsa310s: fix partition sizeLuka Perkov2015-11-182-2/+2
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47504 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add CONFIG_SSB_HOST_SOC symbolRafał Miłecki2015-11-163-0/+3
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47486 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: backport BCM47xx MIPS commits from 4.3 and 4.4-rc1Rafał Miłecki2015-11-169-8/+405
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47484 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: backport ssb changes from 4.4-rc1Rafał Miłecki2015-11-162-0/+1372
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47483 3c298f89-4303-0410-b956-a3cf2f4a3e73
* octeon: remove 3.18 supportFelix Fietkau2015-11-158-2128/+0
| | | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47474 3c298f89-4303-0410-b956-a3cf2f4a3e73
* octeon: switch to 4.3Felix Fietkau2015-11-151-1/+1
| | | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47473 3c298f89-4303-0410-b956-a3cf2f4a3e73
* octeon: add support for 4.3Felix Fietkau2015-11-155-0/+2014
| | | | | | | | Runtime tested on Ubiquiti EdgeRouter Lite. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47472 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add patch to fix prefsrc lookupsFelix Fietkau2015-11-151-0/+60
| | | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47471 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ipq806x: enable vfpv4 support and set cpu type to cortex-a9Felix Fietkau2015-11-141-1/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47468 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: take bcm47xx_nvram.h from kernel and not backportsHauke Mehrtens2015-11-138-103/+96
| | | | | | | | | | | | | | | | | | | compat-wireless/backports now contains a bcm47xx_nvram.h file to backport some of the functions in it which are used by the bcmfmac driver. This file just checks for the kernel versions and provide an empty implementations on older kernel versions. This is OK on most systems, but on bcm47xx / bcm53xx systems we want to call the real functions here. This commit removes the file from backports in our build process like we do it with the bcma and ssb header files. Instead we add a recent version into our kernel so all code uses only one header file. On bcm47xx / bcm53xx the real implementations of this code will be used. Reported-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47467 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: fix an af_packet regression that was breaking PPPoE on 4.1+ (#20707)Felix Fietkau2015-11-112-0/+34
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47459 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: add Linksys routers to default profileLuka Perkov2015-11-112-3/+4
| | | | | | Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47458 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add missing config optionsHauke Mehrtens2015-11-103-0/+3
| | | | | | | | | This was seen by the buildbot on arm64. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47452 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add Arduino YunHauke Mehrtens2015-11-109-1/+217
| | | | | | | | | | | | | | | | | | | | This is based on patches from Federico Fissore <f.fissore@arduino.cc> especially this one: https://github.com/arduino/openwrt-yun/commit/7e2976fa83fb0d72a955574499178c387a1b3c92 The console is running with 250000 baud which is a non standard baud rate and needs an extra patch to be applied, I will try to get this patch upstream or something else which accomplish the same. Some upstream code looks like there are many different versions of this SoC, are these only internal versions and all versions on the consumer market are the same? I saw different GPIO configuration and flash sizes of 8MB and 16MB? Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47451 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: serial: core: add support for boot console with arbitrary baud ratesHauke Mehrtens2015-11-101-0/+76
| | | | | | | | | | | | | | The Arduino Yun uses a baud rate of 250000 by default. The serial is going over the Atmel ATmega and is used to connect to this chip. Without this patch Linux wants to switch the console to 230400 Baud. With this patch Linux will use the configured baud rate and not some standard one which is near by. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47450 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add function to access the GPIO function2 registerHauke Mehrtens2015-11-101-0/+72
| | | | | | | | | | | Add access to the function2 gpio register. This probably has to be converted into a pimux driver later on. This is needed for some setup functions on the Arduino Yun. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47449 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: fix breakage in the 4.3 version of ↵Felix Fietkau2015-11-101-3/+6
| | | | | | | | 611-netfilter_match_bypass_default_table.patch Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47447 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: rename EA3500/EA4500 profilesLuka Perkov2015-11-102-11/+11
| | | | | | | | Match the engineering board names now used elsewhere. Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47436 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: add diag LED on Linksys EA3500Luka Perkov2015-11-101-0/+3
| | | | | | Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47435 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: support sysupgrade on Linksys EA[34]500Luka Perkov2015-11-102-0/+111
| | | | | | | | | | This automatically writes to the alternate firmware partition (on Linksys's dual firmware layout) using code borrowed from the WRT1900AC port. Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47434 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: support Linksys boot counter on EA[34]500Luka Perkov2015-11-101-0/+20
| | | | | | | | | | | | | This is done with existing code from the WRT1900AC port. It makes sure the "auto_recovery" bootloader option is set, and resets the s_env boot counter after a successful boot. This gives users without a serial console connection some measure of safety. Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47433 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: generate factory images for Linksys EA[34]500Luka Perkov2015-11-102-12/+39
| | | | | | | | | This is done with the new image generation system and board names. It also generates a sysupgrade.tar image. Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47432 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: find active Linksys root partitionLuka Perkov2015-11-104-0/+124
| | | | | | | | | | | This is imported verbatim from the mvebu WRT1900AC port. It picks up the current boot partition from the kernel command line, then renames that partition "ubi" so that it auto-mounts. Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47431 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: consistently use engineering board namesLuka Perkov2015-11-104-12/+12
| | | | | | Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47430 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: rework Linksys EA[34]500 DTSLuka Perkov2015-11-106-94/+172
| | | | | | | | | | | | | | | - Use board engineering names rather than marketing names - Linksys uses a dual firmware layout, where the bootloader will switch to the other stored image when one fails to boot three consecutive times. In order to make this firmware compatible with the factory images and the stock bootloader we must match this layout. Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47429 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: enable squashfs-on-ubiblock supportLuka Perkov2015-11-103-3/+3
| | | | | | Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47428 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86: add generic profiles to x86_64, kvm_guest and xen_domuFelix Fietkau2015-11-083-0/+45
| | | | | | | | The imagebuilder requires a profile for every subtarget to work. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47421 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for TP-LINK TL-WR941ND v6 (international version)Felix Fietkau2015-11-0810-80/+265
| | | | | | | | | | | | | | | The international version is completely different from the already supported Chinese version. The WLAN of the QCA956x SoC used by this router has been fixed in r46948. This patch looks like it changes a lot in 700-MIPS-ath79-openwrt-machines.patch; that is not the case. Unfortunately, quilt decided to completely reorganize the Kconfig patch even though only a single section has been added. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47420 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix typo in r47416Felix Fietkau2015-11-071-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47417 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix alignment of struct arpt_arp (fixes #14577)Felix Fietkau2015-11-071-0/+11
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47416 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: remove linux 4.0 supportFelix Fietkau2015-11-07211-33364/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47412 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: minor fixes for mt7621 profilesFelix Fietkau2015-11-072-4/+2
| | | | | | | | | * remove references to non-existing kmod-usb3-mt7621 * ZTB WG2626 doesn't have an RTC (thanks to Piotr Dymacz!) Signed-off-by: Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47407 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the TP-LINK TL-WR1043ND v3Felix Fietkau2015-11-071-1/+8
| | | | | | | | | The hardware of the v3 is identical to the v2. Based-on-patch-by: Andreas Ziegler <github@andreas-ziegler.de> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47406 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for ZyXEL NBG6616.Felix Fietkau2015-11-0710-26/+194
| | | | | | Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47405 3c298f89-4303-0410-b956-a3cf2f4a3e73
* include/image.mk: Introduce generic option to wrap kernel into JFFS2Felix Fietkau2015-11-071-16/+3
| | | | | | | | | Some devices require the kernel to be in a JFFS2 file system. Make the support for this more generic so that it can be used by other devices. Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47404 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix previous commitJohn Crispin2015-11-052-22/+66
| | | | | | | | r47388 accidentially changed 2 files too many Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47389 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: minor tweak to the lks7688 baord nameJohn Crispin2015-11-054-68/+24
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47388 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: add support for 4.3Luka Perkov2015-11-049-0/+1238
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47386 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: pogo_e02: use mainline led definitionsLuka Perkov2015-11-042-4/+4
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47385 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update kernel 4.3-rc7 to version 4.3Luka Perkov2015-11-0418-36/+42
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47384 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ipq806x: fix BOARD_NAME spellingsJonas Gorski2015-11-041-4/+6
| | | | | | | | | | | | | | the board names used by the upgrade check differ from the device names in case, so always set them. We can't rely on tolower or similar since different locales might have different rules for lower case letters, so set them explicitily. Fixes sysupgrade rejecting *-sysupgrade.tar because of the difference. Signed-off-by: Kaspar Schleiser <kaspar@schleiser.de> Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47381 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm63xx: fix brcm, bcm6345-ext-intc interrupt controllerJonas Gorski2015-11-042-6/+8
| | | | | | | | | brcm,field-width is read but unused Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47379 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm63xx: fix Netgear CVG834G HCS magic bytesJonas Gorski2015-11-041-1/+1
| | | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47378 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm63xx: lzma-loader: add BCM3380 supportJonas Gorski2015-11-041-0/+5
| | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47377 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm63xx: lzma-loader: add BCM3368 supportJonas Gorski2015-11-041-1/+4
| | | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47376 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm63xx: fix BCM3368 external interruptsJonas Gorski2015-11-041-1/+1
| | | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47375 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 15:32:36 +0000