aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/dts
Commit message (Collapse)AuthorAgeFilesLines
* ramips: register mt76 device tree info for WSR-1166DHPFelix Fietkau2015-01-171-0/+22
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44010 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: register mt7621 pcie through device treeFelix Fietkau2015-01-171-0/+49
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44009 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Intenso Memory 2 Move USB 3.0John Crispin2015-01-171-0/+113
| | | | | | | | | | | | | | | | | | | This adds support for a rt5350-based "portable nas" solution from Intenso. The board comes with 32M RAM and 8M Flash, the built-in HDD is connected/accessible via a usb3.0<->sata bridge VLI VL701. The device has 1 Ethernet port (100M/10M), 1 micro b usb 3.0 socket (for charging the battery, or accessing the hdd directly). Wireless connectivity is provided by the rt5350 SoC [i.e.: 802.11n 1x1 2.4 GHz with a pcb antenna.] Serial, leds, wifi, ethernet and usb are tested and as far as I can tell: they are working fine (tm). Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44001 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add support for Kingston MLWG2John Crispin2015-01-171-0/+118
| | | | | | | | | | | | | | This patch adds support for the Kingston Mobilelite Wireless G2 (MLWG2) http://wiki.openwrt.org/toh/kingston/mlwg2 https://github.com/gmacario/kingston-mlwg2-hack/wiki/Testing-OpenWrt-on-MLWG2 Tested-by: Gianpaolo Macario <gmacario@gmail.com> Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43990 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add i2c pingroup to the pinmux for rt-n14uJohn Crispin2015-01-171-1/+1
| | | | | | | | i2c pins are wired to wps a reset button Signed-off-by: Pavel Löbl <lobl.pavel@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43985 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add preliminary Archer C20i supportFelix Fietkau2015-01-091-0/+111
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43898 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Fix HooToo HT-TM02 support.John Crispin2015-01-081-16/+16
| | | | | | | | | | | | | - Fix LED definitions. - Add mode-switch slider definition (at GPIO 14). - Remove unneeded VLAN now that the ethernet driver is fixed and TCP packets get passed correctly now. (This router only has one port.) - Fix LAN port MAC address, which is defined in the factory partition as WLAN MAC address + 1. - Fix board name, as the company name is HooToo and not HOOTOO. - Remove unnecessary packages from the profile. (The end-user is supposed to use mechanisms such as the ImageBuilder in order to add his own set of packages to his own images... while the precompiled images should just contain the core set of packages needed to run the base functions of a wireless router.) Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43883 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: update BR-6475ND dtsJohn Crispin2015-01-081-1/+3
| | | | | | | | Update firmware location for 2.4GHz radio on the Edimax BR-6475nD. Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43881 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix WSR-600DHP flash layoutFelix Fietkau2015-01-031-1/+6
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43819 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix WSR-1166DHP flash layoutFelix Fietkau2015-01-031-3/+13
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43818 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix WSR-{600,1166} namesFelix Fietkau2015-01-032-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43817 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: on mt7621 only enable xhci for the eval board (still needs patch ↵Felix Fietkau2015-01-032-0/+6
| | | | | | | | cleanup to take effect) Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43815 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rework and fix m25p80 chunked-io supportFelix Fietkau2015-01-022-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43808 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: remove partitoon map from mt7621.dtsiJohn Crispin2014-12-151-31/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43720 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: drop old pinmux nodes from dts filesJohn Crispin2014-12-144-27/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43701 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips:Add support for Aigale Ai-BR100John Crispin2014-12-131-0/+106
| | | | | | | | | Aigale Ai-BR100 is a router with mt7620a soc. There are only 2 lights on the board (WAN and WLAN) so I used the wlan light as the status led. Signed-off-by: 郭传鈜 <gch981213@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43681 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: make uartf functional on AWM002John Crispin2014-12-121-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43664 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: generate factory images for Nexx devicesJohn Crispin2014-12-073-42/+89
| | | | | | Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43541 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: mt7621 is a 1004KcJohn Crispin2014-12-031-1/+5
| | | | | | Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43514 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: fix pcie resetJohn Crispin2014-11-171-2/+11
| | | | | | | | | some old mt7620a uboots dont reset the pcie core properly. work around this issue in the kernel driver. Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43292 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: disable 2.4 ghz on 802.11ac wifi on WHR-1166DFelix Fietkau2014-11-161-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43283 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: use mediatek,mtd-eeprom instead of ralink for mt76Felix Fietkau2014-11-161-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43282 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: few updates tot he sdhci probe codeJohn Crispin2014-11-155-2/+20
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43275 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: update pcie driver to load ranges from dtsJohn Crispin2014-11-143-3/+97
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43249 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add support for WSR-600/1166John Crispin2014-11-142-0/+297
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43244 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: fix up dts for mt7621 eval boardJohn Crispin2014-11-122-26/+5
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43238 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: more mt7530 fixesJohn Crispin2014-11-111-2/+2
| | | | | | | | make 1166 wan port work. this broke due to the esw_polling bug Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43236 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: update DCS-930 dtsLuka Perkov2014-11-111-26/+4
| | | | | | | | | * read MAC address from factory partition * remove port defines since there is only one port (most likely C/P error) Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43231 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add eeprom data for 802.11ac wlan on WHR-1166DFelix Fietkau2014-11-081-0/+8
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43218 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add missing size/address-cells to device tree include filesFelix Fietkau2014-11-082-0/+14
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43217 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: fix the compat string for mt7620a pciJohn Crispin2014-11-081-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43211 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: improve r43200John Crispin2014-11-062-0/+2
| | | | | | | | | r43200 tries to detect if the fixup is needed or not. control the behaviour via OF instead and disable unused ports. Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43201 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: tweak e1700 dts fileJohn Crispin2014-11-061-2/+0
| | | | | | | | the current driver code wont know which mt7530 to apply the llllw setting to. Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43199 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: make pci driver handle mt7628John Crispin2014-11-062-4/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43198 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add support for mt7628John Crispin2014-11-063-1/+282
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43197 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ramips]: add support for the Linksys E1700Imre Kaloz2014-11-051-0/+148
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43186 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add pci bidge node to mt7620a dts fileJohn Crispin2014-11-031-0/+5
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43172 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: fix wan port on whr-1166John Crispin2014-11-031-3/+16
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43171 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Airlink101 AR670WJohn Crispin2014-11-031-0/+103
| | | | | | | | | | This is a RT2880-based board, 32MB RAM, 4MB flash. The bootloader is a hacked u-Boot that reads an LZMA image directly, so we skip generating the uImage header and enable the lzma mtdsplit parser. Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43153 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for A5-V11 board (resubmit)John Crispin2014-10-291-0/+117
| | | | | | | | | | (Reposted due to an issue with the patchwork server during original submission) Unbranded. Silkscreen on PCB is “A5-V11”, believed to be made by Bococom (or at least uses Bococom image encryption - as used on poray devices - but different key) Signed-off-by: Gareth Bryan <gareth@mx9.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43102 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Nexx WT3020 devicesJohn Crispin2014-10-202-0/+200
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42983 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix usercfg partition offset for WHR-1166DFelix Fietkau2014-10-191-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42958 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: Build 8M image for 7Links PX-4885John Crispin2014-10-133-39/+84
| | | | | | | | | 7Links PX-4885 (clones) can also be purchased with 8MB flash. Creating images for these routers, use dtsi for common part Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42892 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Nexx WT1520John Crispin2014-10-101-0/+83
| | | | | | Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42867 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: D-Link DIR-810L: make led naming consistent with other boardsJohn Crispin2014-10-061-4/+4
| | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42789 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Support for RAMIPS based Tripmate HT-TM02 boardJohn Crispin2014-10-061-0/+104
| | | | | | | | | | | | Provides support for the Tripmate HT-TM02 personal router including LEDs and reset button. “Mode” switch is not supported. New profile includes full set of packages required to enable LEDs, USB, and LUCI. Patches were applied against trunk snapshot r42649. Functionality has been tested in AP, basic wifi client, wifi router, and routed client modes - all good. Signed-off-by: Ron Curry <wingspinner@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42785 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: D-Link DIR-810L. Add support for SoC 2.4 GHz wireless and fix leds ↵John Crispin2014-09-191-3/+7
| | | | | | naming git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42619 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: DIR-645 picks up incorrect MAC address in DTS fileJohn Crispin2014-08-281-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42321 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: the mt7620 evb has a usb portJohn Crispin2014-08-251-0/+8
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42293 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: enable second SPI for VoCoreJohn Crispin2014-08-251-10/+9
| | | | | | | | This patch enables the second SPI as spidev and also fixes some typos. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42277 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-04 16:15:27 +0000