aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: ag71xx: fix ag71xx_probe error pathGabor Juhos2013-11-111-1/+3
| | | | | | | Signed-off-by: Catalin Patulea <cat@vv.carleton.ca> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38716 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: fix a race involving netdev registrationGabor Juhos2013-11-082-23/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In particular, phy_connect before register_netdev. This is because register_netdev runs the netdev notifiers, which can race with the rest of the initialization in ag71xx_probe. In my case this manifested in two ways: 1) If ag71xx is compiled as a module and inserted after netifd has started, netifd is notified by register_netdev before the call to ag71xx_phy_connect. netifd tries to bring the interface up, which calls ag71xx_open, which in turn enters ag71xx_phy_start. This keys off ag->phy_dev (which is still NULL) and thinks this is a fixed-link board, and enters ag71xx_link_adjust. This looks at ag->speed which is not yet initialized and hits the BUG() in the switch (ag->speed) in ag71xx_link_adjust. This is the wrong code path for ag71xx_phy_start - my board has PHYs that need to be brought up with phy_start. Doing ag71xx_phy_connect before register_netdev ensures that ag->phy_dev is non-NULL before ag71xx_phy_start is ever called. 2) When ag71xx is built into the kernel, and netconsole is enabled, there is a gap in the initial burst of replayed printks right after the netdev comes up. My assumption is that netconsole is also triggered by a netdev notifier, and part of this printk burst happens before the call into ag71xx_phy_connect, so part of the burst is lost while the PHY comes up. This patch fixes the gap - all the printks before eth0 comes up are bursted in full when netconsole initializes. ag71xx_phy_connect_xxx no longer runs with a registered netdev, so the logging has been adjusted accordingly to avoid "unregistered net_device" or "eth%d" messages in dmesg. Signed-off-by: Catalin Patulea <cat@vv.carleton.ca> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38689 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: build image for the WD My Net Wi-Fi Range ExtenderGabor Juhos2013-11-072-1/+24
| | | | | | | | | | | Patchwork: http://patchwork.openwrt.org/patch/4281/ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> [juhosg: - remove the Image/Build/CyberTANLZMA/loader macro, it is not used - move the MYNETREXT SingleProfile definition to the correct place] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38688 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user-space support for the WD My Net Wi-Fi Range ExtenderGabor Juhos2013-11-075-4/+23
| | | | | | | | Patchwork: http://patchwork.openwrt.org/patch/4281/ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38687 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add kernel support for the My Net Wi-Fi Range Extender deviceGabor Juhos2013-11-073-0/+215
| | | | | | | | | | | | | This patch adds a new device definition for a Western Digital device. The hardware seems to be based on Qualcomm Atheros DB120 design. Patchwork: http://patchwork.openwrt.org/patch/4281/ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> [juhosg: refresh kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38686 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: image: add EOF marker to the WNDR4300 UBI imageGabor Juhos2013-11-071-9/+6
| | | | | | | | | | | | | | | Append EOF markers to the END of the UBI image file. This forces the kernel to erase all blocks after the marker even if those blocks are not empty. Additionally, the resulting image can be flashed from the original web UI now, so use '-factory' suffix for that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38683 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71x: image: don't use the wndr3700 utilityGabor Juhos2013-11-061-28/+14
| | | | | | | | Pass the uImage magic value directly to mkimage instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38662 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: image: fix WNDR4300 initramfs image generationGabor Juhos2013-11-051-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38659 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: image: allow to use optional parameters for MkuImageLzma/initramfsGabor Juhos2013-11-051-2/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38658 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: generate recovery image for WNDR4300Gabor Juhos2013-11-052-2/+97
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extended the Makefile to generate a working factory reset image for Netgear WNDR4300. The image uses UBI with two volumes squashfs (rootfs) and JFFS2 (rootfs_data). In order to make stock U-Boot happy, a fake rootfs image is placed into the last erase block of the kernel partition. Signed-off-by: Stefan Agner <stefan@agner.ch> [juhosg: - restore the NetgearNAND/initramfs macro, - remove unused {Squash,Ubi}fsTemplate macros, - remove board specific mtd options from CONFIG_CMDLINE, append the board specific ubi.mtd parameter to the kernel command line instead, - increase kernel partition size to 2MiB, - use board specific ini file for ubinize, - put jffs2 eof mark into the rootfs_data ubi volume, - use KDIR_TMP for temporary images, - use the squashfs-raw image, - increase kernel partition size to 2MiB, - use a local ubinize macro, - fix macro parameter comments, - put the fake rootfs into the last erase block of the kernel partition, - move Image/Build/NetgearNAND/buildkernel macro before define Image/Build/NetgearNAND, - don't use the wndr3700 utility, use '-M' parameter of mkimage to set the uImage magic, - use '-recovery' suffix for the generated image, it is only usable via the fw_recovery function of the bootloader, - update commit log] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38655 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update 3.10 to 3.10.18Gabor Juhos2013-11-052-5/+5
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38652 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: move WNDR4300 profile to the nand subtargetGabor Juhos2013-11-043-15/+25
| | | | | | | Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38647 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add new subtarget nand for WNDR4300Gabor Juhos2013-11-043-1/+117
| | | | | | | | | | | | | | | | | | | | | | | | | Add new subtarget nand with UBI/UBIFS including GLUEBI and squashfs. This target will be used for NAND based router which make use of UBI (and maybe UBIFS later on) in order to provide proper NAND support. Signed-off-by: Stefan Agner <stefan@agner.ch> [juhosg: - tweak target.mk: change BOARDNAME variable, improve Target/Description, remove targz and ubifs from FEATURES and add broken flag, - optimize kernel configuration: disable ubifs, it is not used yet, disable unused MTD options, disable SPI support disable unused network drivers, tune kernel command line, - remove image/ubinize.cfg, it will be in a follow-up patch - move profile modifications into a separate patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38646 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: remove yaffs from the generic rootfstype listGabor Juhos2013-11-041-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38645 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: image: dd root.* images in fs specific macrosGabor Juhos2013-11-041-3/+9
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38644 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: image: only define profiles for the generic subtargetGabor Juhos2013-11-011-1/+4
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38636 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: image: add IMAGE_PROFILE variableGabor Juhos2013-11-011-3/+5
| | | | | | | | | Ensures that the 'Default' images are generated even if the subtarget has no profiles. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38635 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: always enable hw ecc support for the ar934x-nfc moduleGabor Juhos2013-11-011-1/+3
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38634 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add missing config optionsHauke Mehrtens2013-11-011-1/+0
| | | | | | | | | The buildbots found some new missing config options. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38633 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: move subtarget specific features to target.mkGabor Juhos2013-10-303-1/+3
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38600 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: don't build uImages for the mikrotik subtargetGabor Juhos2013-10-301-0/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38598 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: disable non Mikrotik boards in the mikrotik subtargetGabor Juhos2013-10-301-0/+82
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38597 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix Kconfig symbol selection for RB95x/RB2011Gabor Juhos2013-10-309-14/+17
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38596 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: move CONFIG_MTD_NAND_AR934X_HW_ECC option to subtarget configGabor Juhos2013-10-302-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38595 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add profile and build image for the BXU2000n-2 A1 boardGabor Juhos2013-10-302-0/+19
| | | | | | | | | | | | Patchwork: http://patchwork.openwrt.org/patch/4183/ Signed-off-by: Terry Yang <yangbo@bhunetworks.com> [juhosg: - remove MultiProfile, it makes no sense for a single board - move SingleProfile call and the mtdlayout to a different location keep things sorted (well, almost)] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38593 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user-space support for the BXU2000n-2 A1 boardGabor Juhos2013-10-304-0/+11
| | | | | | | | Patchwork: http://patchwork.openwrt.org/patch/4183/ Signed-off-by: Terry Yang <yangbo@bhunetworks.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38592 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add kernel support for BHU Networks BXU2000n-2 A1 boardGabor Juhos2013-10-303-0/+160
| | | | | | | | | | | | | | BXU2000n-2 A1 is a BHU Networks WLAN board, use ar9341 chip. Patchwork: http://patchwork.openwrt.org/patch/4183/ Signed-off-by: Terry Yang <yangbo@bhunetworks.com> [juhosg: - rename and refresh kernel patch, - fix some checkpatch warnings and adjust whitespaces in mach-bhu-bxu2000n2-a.c] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38591 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user space support for the Sitecom WLR-8100 wireless routerGabor Juhos2013-10-303-1/+8
| | | | | | | | Patchwork: http://patchwork.openwrt.org/patch/4148/ Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38590 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add kernel support for the Sitecom WLR-8100 wireless routerGabor Juhos2013-10-303-0/+262
| | | | | | | | | | | | - unsure about copyright message - based on AP136-010 Patchwork: http://patchwork.openwrt.org/patch/4147/ Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> [juhosg: rename and refresh kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38589 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add profile and build image for the Dragino2 boardGabor Juhos2013-10-302-0/+19
| | | | | | | | | Patchwork: http://patchwork.openwrt.org/patch/4234/ Signed-off-by: Pau Escrich <p4u@dabax.net> [juhosg: remove kernel+rootfs partition and use uimage split instead] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38588 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add kernel support for DRAGINO2Gabor Juhos2013-10-303-0/+167
| | | | | | | | | | | | | | | | | | | This patch adds support for DRAGINO2 board (used by Meshpotato v2). Most of the files included can be found in the official svn repository provided by the company [1]. I have just adapt it to the last OpenWrt trunk revision (Fri Oct 4 10:49:47 2013). 1. http://svn.dragino.com/dragino2 Patchwork: http://patchwork.openwrt.org/patch/4234/ Signed-off-by: Pau Escrich <p4u@dabax.net> [juhosg: - rename and refresh kernel patch, - fix checkpatch warnings in mach-dragino2.c] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38587 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rename 'nand' subtarget to 'mikrotik'Gabor Juhos2013-10-236-3/+3
| | | | | | | | | | | | | It is for Mikrotik devices only, rename the subtarget to reflect that. Also fix the wget2nand script to use the new image names. Based on the patch by Stefan Agner: http://patchwork.openwrt.org/patch/4123/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38509 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: change title and description for NAND subtargetGabor Juhos2013-10-231-3/+3
| | | | | | | | | | | | The nand subtarget supports Mikrotik boards only. Change the title and the description to reflect that. Based on the patch by Stefan Agner: http://patchwork.openwrt.org/patch/4123/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38508 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: remove 'Target/Description' from main MakefileGabor Juhos2013-10-231-4/+0
| | | | | | | | | | | | Ensure that menuconfig shows the correct help text for subtargets. Based on the patch by Stefan Agner: http://patchwork.openwrt.org/patch/4123/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38507 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update 3.10 to 3.10.17Gabor Juhos2013-10-232-9/+12
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38506 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Fix sysupgrades for Allnet and OpenMesh devicesGabor Juhos2013-10-202-0/+4
| | | | | | | | | | | | | | | | | | | | | | | Both Allnet and OpenMesh sysupgrade uses fw_setenv from uboot-envtools to change different settings in the uboot environment. uboot-envtools version 2013.01 introduced a filesystem lock "/var/lock/fw_printenv.lock" to guarantee mutually exclusive access to the uboot environment. But the path /var doesn't exist on the sysupgrade ramfs. An upgrade on these devices fails since r36033 ("[package] uboot-envtools: upgrade to version 2013.01.01") with following messages: Error opening lock file /var/lock/fw_printenv.lock failed to update U-Boot environment Creating the "/var/lock" path before running fw_setenv is therefore a requirement unless the locking functionality in fw_setenv is removed or replaced with optional locking. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38483 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix WLAN 5 GHz LED init on dir-825-c1Gabor Juhos2013-10-201-2/+1
| | | | | | | | | | | | Fixes the 5 GHz LED. The same function has no effect on the 2.4 GHz LED at all, so we might as well remove it. Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38482 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update kernel to 3.10.15Hauke Mehrtens2013-10-131-1/+1
| | | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38384 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Fix sysupgrade when upgrading to images with small rootfs partitionVasilis Tsiligiannis2013-10-131-1/+1
| | | | | | Signed-off-by: Vasilis Tsiligiannis <acinonyx@openwrt.gr> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38382 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx]: make the generated images actually flashable on the Unifi devices.Imre Kaloz2013-10-111-2/+2
| | | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38364 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ar934x-nfc: disable subpage write when hardware ECC is usedGabor Juhos2013-09-271-0/+6
| | | | | | | | It is not supported by the controller. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38234 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update 3.10 to 3.10.13Gabor Juhos2013-09-272-16/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38228 3c298f89-4303-0410-b956-a3cf2f4a3e73
* build: unify mips target cflagsFelix Fietkau2013-09-261-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38210 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use correct board id for TL-MR3040 v2Gabor Juhos2013-09-251-1/+1
| | | | | | | | | | Fix the image building code so that the kernel correctly distinguishes between hardware revisions. Signed-off-by: Mads Hansen <d@taba.se> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38192 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user-space support for TL-MR3040 v2Gabor Juhos2013-09-254-1/+7
| | | | | | | Signed-off-by: Mads Hansen <d@taba.se> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38191 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: improve kernel support for the TL-MR3040 v2Gabor Juhos2013-09-252-0/+55
| | | | | | | | | | | This patch adds support for the hardware slide switch on the TL-MR3040 v2. Signed-off-by: Mads Hansen <d@taba.se> [juhosg: use EV_SW instead of EV_KEY] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38190 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel/3.10: refresh all target patchesGabor Juhos2013-09-252-5/+5
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38182 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: image: simplify mynet_n600_mtdlayoutGabor Juhos2013-09-241-1/+1
| | | | | | | | | | | | | | | | | | Remove the kernel and rootfs partitions. The Seama parser can find those automatically: 0x000000070000-0x000000ff0000 : "firmware" 2 seama-fw partitions found on MTD device firmware 0x000000070000-0x0000001b0000 : "kernel" 0x0000001b0000-0x000000ff0000 : "rootfs" mtd: partition "rootfs" set to be root filesystem 1 squashfs-split partitions found on MTD device rootfs 0x000000360000-0x000000ff0000 : "rootfs_data" 0x000000ff0000-0x000001000000 : "radiocfg" Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38155 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: enable the Seama firmware parserGabor Juhos2013-09-241-0/+1
| | | | | | | | It will be used for the WD My Net N600 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38154 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: update the Image/Build/WZRHP macroGabor Juhos2013-09-241-8/+9
| | | | | | | | | | | | | - append the root squashfs directly after the kernel, - use the 64kraw/128kraw template instead of the 64k/128k, - ensure that the generated images have enough erase blocks for JFFS2 garbage collection, Tested on WZR-HP-G300NH and WZR-600DHP boards. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38153 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-10 14:21:30 +0000