aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/generic/profiles
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: add support for OpenEmbed SOM9331Allan Nick Pedrana2016-06-221-0/+13
| | | | | | | | This patch adds the target profile SOM9331 and configures hardware functionality for the 3x Eth Ports & corresponding LED's, the USB Host, the USART to USB bridge and the System LED. Signed-off-by: Allan Nick Pedrana <nik9993@gmail.com>
* ar71xx: convert OM2P to device profileFelix Fietkau2016-06-221-11/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: enable profile sorting in preparation for adding device profilesFelix Fietkau2016-06-223-0/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: add WRTnode2Q supportKeLei Liang2016-06-221-0/+17
| | | | Signed-off-by: KeLei Liang <xzmu@wrtnode.com>
* ar71xx: update bombZoltan HERPAI2016-06-221-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ar71xx: split tp-link image building code into a separate file ar71xx: split legacy image building code into a separate file ar71xx: split ubnt image building code into a separate file ar71xx: move generic device image definitions to a separate file ar71xx: move nand device image definitions to a separate file ar71xx: Add support for initramfs images for OpenMesh devices ar71xx: Generate sysupgrade images for OpenMesh devices ar71xx: Move OpenMesh image target validation into subfunction ar71xx: Allow OpenMesh CE images with more than 3 files ar71xx: add kernel support for the OpenMesh OM2P-HSv3 ar71xx: add user-space support for the OpenMesh OM2P-HSv3 ar71xx: enable sysupgrade for the OpenMesh OM2P-HSv3 package/om-watchdog: add OpenMesh OM2P-HSv3 support package/uboot-envtools: add OpenMesh OM2P-HSv3 support ar71xx: add OM2P-HSv3 to the OM2P profile ar71xx: add kernel support for the OpenMesh MR1750v2 ar71xx: add user-space support for the OpenMesh MR1750v2 ar71xx: enable sysupgrade for the OpenMesh MR1750v2 package/om-watchdog: add OpenMesh MR1750v2 support package/uboot-envtools: add OpenMesh MR1750v2 support ar71xx: extract ath10k wifi board.bin for the OpenMesh MR1750v2 board ar71xx: add MR1750v2 to the MR1750 profile ar71xx/cpe510: split profile into 2 profiles cpe210 and cpe510 ar71xx/cpe510: use second wifi calibration table ar71xx: add GPIO pin for usb power switch for RouterBOARD 912 ar71xx: switch ordering and template to improve readability ar71xx: Fix TL-WR841N v11 LEDs, use separate machine Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* ar71xx: Add support for Ubiquiti UniFi AP AC PROP.Wassi2016-06-201-0/+11
| | | | | Add support for the Ubiquiti UniFi AP AC PRO Signed-off-by: P.Wassi <p.wassi at gmx.at>
* ar71xx: Rename unifiac to unifiac-liteP.Wassi2016-06-201-5/+5
| | | | | | | To avoid confusion with different unifiac devices, rename existing target "unifiac" to "unifiac-lite", before "unifiac-pro" is introduced. Signed-off-by: P.Wassi <p.wassi at gmx.at>
* ar71xx: typo in jjplus profileCezary Jackiewicz2016-06-201-1/+1
| | | | Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
* ar71xx: add TP-Link TL-WR810N supportJohn Crispin2016-06-191-0/+11
| | | | | | | | | This patch adds support for the TP-Link TL-WR810N. https://wiki.openwrt.org/toh/tp-link/tl-wr810n Signed-off-by: Jens Steinhauser <jens.steinhauser@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49286 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for the OMYlink OMY-G1John Crispin2016-04-261-0/+10
| | | | | | | | | | https://wiki.openwrt.org/toh/omylink/omy-g1 http://www.omylink.com/ Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49258 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for Compex WPJ342John Crispin2016-04-091-0/+10
| | | | | | | | | | | | OpenWrt can be flashed with following uboot commands: tftpboot 0x80500000 openwrt-ar71xx-generic-wpj342-16M-squashfs-sysupgrade.bin erase 0x9f030000 +$filesize cp.b $fileaddr 0x9f030000 $filesize Signed-off-by: Christian Mehlis <christian@m3hlis.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49157 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add OM5P-ACv2 to the OM5P-AC profileJohn Crispin2016-04-091-2/+2
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49155 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: create profile and build image for the OpenMesh OM5P-AC boardJohn Crispin2016-04-091-0/+11
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49148 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for ap120cLuka Perkov2016-03-231-1/+13
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49082 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for the OMYlink OMY-X1John Crispin2016-03-161-0/+16
| | | | | | | | | | | | This patch adds support for the OMYlink OMY-X1 https://wiki.openwrt.org/toh/omylink/omy-x1 http://www.omylink.com/ Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49026 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the Telldus TellStick ZNet LiteJohn Crispin2016-03-101-0/+17
| | | | | | Signed-off-by: Micke Prag <micke.prag@telldus.se> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48977 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: enable USB packages for WNR2200 (fixes #21984)Felix Fietkau2016-03-061-1/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48936 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add OOLITE to the Gainstrong profile, removed standalone profile.John Crispin2016-03-012-18/+11
| | | | | | | | | This patch moves the OOLITE profile code into the overarching Gainstrong profile and deletes the old single profile file. Signed-off by: Stijn Segers <francesco.borromini@inventati.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48866 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Revert "ar71xx: WNR612v2: exclude USB modules from image"Felix Fietkau2016-02-261-1/+0
| | | | | | | | This reverts commit r48778. The issue has now been fixed properly Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48808 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Renamed Gainstrong MiniBox profile to Gainstrong (manufacturer) and ↵John Crispin2016-02-261-1/+1
| | | | | | | | | | | | | | | | updated copyright This is the first patch of a series of three to tidy up the profiles for Gainstrong devices. Right now there are two Gainstrong profiles, each for a single device built by this manufacturer. This patch renames the MiniBox profile to Gainstrong and updates the copyright notice. The series applies cleanly to current trunk. Resent with the architecture in the subject, forgot that the first time. Signed-off by: Stijn Segers <francesco.borromini@inventati.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48797 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: WNR612v2: exclude USB modules from imageFelix Fietkau2016-02-251-0/+1
| | | | | | | | | Netgear WNR612v2 has no USB port yet default system image includes USB kernel modules. This patch fixes that. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48778 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Support for Ubiquiti UniFi AP AC LITEJohn Crispin2016-02-121-0/+11
| | | | | | | Add support for the Ubiquiti UniFi AP AC LITE Signed-off-by: P.Wassi <p.wassi at gmx.at> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48711 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: WNR2000v3: exclude USB modules from imageJohn Crispin2016-02-121-0/+1
| | | | | | | | | Netgear WNR2000v3 has no USB port yet default system image includes USB kernel modules. This patch fixes that. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48701 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for Netgear WPN824NJohn Crispin2016-01-191-0/+10
| | | | | | | | | | | | | | | | Add support for Netgear WPN824N. Hardware specs: * AR7240, 4 LAN ports, 1 WAN port * AR9285 WLAN * 32 MB RAM * 4 MB Flash * 16 LEDs (LAN, WAN and Power/Status contain two LEDs for dual color effect) * 3 Buttons (not supported) Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48356 3c298f89-4303-0410-b956-a3cf2f4a3e73
* V2 ar71xx : Add Support for the Bitmain Antrouter R1John Crispin2016-01-011-0/+11
| | | | | | | | | | This patch adds support for the Bitmain Antrouter R1 http://wiki.openwrt.org/toh/bitmain/r1 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48058 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for AirTight Networks C-55John Crispin2015-12-231-0/+17
| | | | | | | | This patch is to add support for the AirTight Networks C-55 Access Point Signed-off-by: Chris R Blake <chrisrblake93@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47973 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Image generation for PowerCloud CR5000 Cloud RouterFelix Fietkau2015-12-191-0/+18
| | | | | | | | | | | | Kernel part of support for the PowerCloud Systems CR5000. The CR5000 is a dual-band 802.11n wireless router with 8MB flash, 64 MB RAM, (unused in stock firmware) USB 2.0 port, and five port gigabit ethernet switch. The CR5000 was sold as hardware for the Skydog cloud-managed router service. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47943 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Image generation for PowerCloud CR3000 Cloud RouterFelix Fietkau2015-12-191-0/+18
| | | | | | | | | | | | Image generation part of support for PowerCloud CR3000. The CR3000 is a 802.11n 2.4 GHz wireless router with 8MB flash, 64MB RAM, a four port fast ethernet switch, and a fast ethernet wan port which was sold by PowerCloud Systems as hardware for the Skydog cloud-managed router service. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47942 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: PowerCloud CAP324 image generationFelix Fietkau2015-12-191-0/+20
| | | | | | | | | | | | | | | Image generation (and mtd partition) part of support for PowerCloud CAP324 Cloud AP. The CAP324 Cloud AP is a device sold by PowerCloud Systems who's stock firmware (CloudCommand) provides 'cloud' based managment of large numbers of access points. The CAP324 is a dual-band 802.11n wireless access point with 16MB flash and 128MB RAM and single gigabit ethernet port. It can be powered via PoE or a power adaptor. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47941 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for TRENDnet TEW-823DRUJohn Crispin2015-12-171-0/+12
| | | | | | | | | | | | | | Add support for TRENDnet TEW-823DRU: - cpu: QCA9558 @720MHz - flash: 16MB - ram: 256MB - 4+1 RJ45 100/1000Mbps - wifi: QCA9558 (bgn) and QCA9880-BR4A (ac) - 1x USB 2.0 Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47927 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for Wallys DR344John Crispin2015-12-111-0/+17
| | | | | | | | This patch is for Wallys DR344 support under OpenWRT Signed-off-by: Philippe Duchein <wireless-dev@duchein.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47847 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add GL-Domino Pi support V3John Crispin2015-11-241-0/+11
| | | | | | | | This is the patch for GL-Domino Pi V3. Updated against the latest trunk. Signed-off-by: alzhao<alzhao@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47622 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add GL-AR300 support V3John Crispin2015-11-241-0/+11
| | | | | | | | This is the patch for GL-AR300 V3, tested against the latest trunk. Signed-off-by: alzhao<alzhao@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47621 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add GL-AR150 support V3John Crispin2015-11-241-3/+13
| | | | | | | | This is the 3rd version. Modified against the latest trunk. Signed-off-by: alzhao<alzhao@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47620 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the devolo dLAN HotspotJohn Crispin2015-11-211-0/+13
| | | | | | Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47554 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add Arduino YunHauke Mehrtens2015-11-101-0/+19
| | | | | | | | | | | | | | | | | | | | This is based on patches from Federico Fissore <f.fissore@arduino.cc> especially this one: https://github.com/arduino/openwrt-yun/commit/7e2976fa83fb0d72a955574499178c387a1b3c92 The console is running with 250000 baud which is a non standard baud rate and needs an extra patch to be applied, I will try to get this patch upstream or something else which accomplish the same. Some upstream code looks like there are many different versions of this SoC, are these only internal versions and all versions on the consumer market are the same? I saw different GPIO configuration and flash sizes of 8MB and 16MB? Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47451 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for ZyXEL NBG6616.Felix Fietkau2015-11-071-0/+12
| | | | | | Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47405 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add Gainstrong MiniBox v1.0 support to trunkJohn Crispin2015-10-191-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch supersedes the v1 from September 17th. Bumping the patch version - the MiniBox profile showed up under M, but since it's called 'Gainstrong MiniBox v1.0' now it looks out of place. Renamed the profile to gs-minibox-v1.mk to fix that. The following patch adds support for the Gainstrong MiniBox into trunk (or 'Designated Driver' :D ). Fixed items: - Inverted LED polarity (OOLITE seems to suffer from the same problem). - Changed uppercase MINIBOX_V1_ prefix as requested. - Prefixes are now gs_minibox_ similar to gs_oolite_ (same vendor). - Mention the vendor (Gainstrong) in code headers. Compiles fine, has been confirmed working by owners on 15.05. Question: I've seen some boards use tools/firmware-utils/src/mktplinkfw.c, the MiniBox images build fine without, so I'm wondering: do I need to add it in there as well? Any added benefit? Thank you Signed-off by: Stijn Segers <francesco.borromini@inventati.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47234 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Bitmain Antminer S1 & S3 cleanupJohn Crispin2015-10-191-8/+8
| | | | | | | | | | | | Sets the LEDs to boardname:color:led-name Sets the LAN to eth0 Other corrections such as the Machine Name and HWIDs v2 corrects the profile names in the Makefile and changes tabs to spaces in the Makefile 'define Device/' like the other devices. Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47221 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add WeIO Board SupportFelix Fietkau2015-09-241-0/+17
| | | | | | | | | | Add support for WeIO board (http://we-io.net). This board is based on Carambola2 board form 8Devices. Signed-off-by: Drasko DRASKOVIC <drasko.draskovic@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> [some cleanups] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47036 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for ap152 reference boardJohn Crispin2015-09-161-0/+11
| | | | | | Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46972 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add TP-LINK TL-WDR3320 v2 supportJohn Crispin2015-09-141-0/+11
| | | | | | | | | | This patch adds support for TP-LINK TL-WDR3320 v2. This router uses a chinese version 2 firmware header,. Signed-off-by: Weijie Gao <hackpascal@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46934 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: create profile and build image for the OpenMesh MR1750 boardJohn Crispin2015-09-141-1/+12
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46932 3c298f89-4303-0410-b956-a3cf2f4a3e73
* target: ar71xx: add support for COMFAST CF-E316N v2 boardFelix Fietkau2015-09-111-0/+19
| | | | | | | | | | | | This adds full support (sans sysupgrading from vendor firmware) for the COMFAST CF-E316N v2 (aka CF-E316V2, CF-E316N-V2 and CF-E316Nv2.0, no FCC ID) by Shenzhen Four Seas Global Link Network Technology Co., Ltd (this company is actively refusing to provide GPL'd sources for the OpenWrt version they ship with the device, damn them). Signed-off-by: Paul Fertser <fercerpav@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46852 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for TP-Link TL-WDR6500 v2John Crispin2015-08-171-0/+11
| | | | | | | | | | | Signed-off-by: Weijie Gao <hackpascal@gmail.com> This patch adds support for TP-Link TL-WDR6500 v2. The firmware has a U-Boot header for kernel, and a TP-LINK v2 header for the whole firmware, so I have to create a new firmware creation method. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46663 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for Black SwiftJohn Crispin2015-08-171-0/+17
| | | | | | | | | | | | Add support for the Black Swift board: http://www.black-swift.com/ Took relevant parts and slightly adapted from: https://github.com/blackswift/openwrt/blob/master/bsb.patch Signed-off-by: Bruno Randolf <br1@einfach.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46651 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for Onion OmegaJohn Crispin2015-07-241-0/+16
| | | | | | | | | | | | This patch adds support for the Onion Omega. https://onion.io/omega Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Acked-by: Boken Lin <bl@onion.io> Tested-by: Jacky Huang <huangfangcheng@163.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46458 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for AP147-010 reference boardJohn Crispin2015-07-241-0/+10
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46457 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Revert "ar71xx: Add support for Cisco-Linksys WAP4410N" (r46250)Felix Fietkau2015-07-191-10/+0
| | | | | | | | The commit is incomplete, it does not even build the mach-* file This reverts commit 6e6adcf7a197b1802cb728ddcccf05f890ca0574 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46425 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the devolo dLAN pro 1200+ WiFi acJohn Crispin2015-07-141-0/+14
| | | | | | Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46342 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 05:05:01 +0000