aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/files
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: Add support for ZyXEL NBG6616.Felix Fietkau2015-11-071-18/+123
| | | | | | Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47405 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Bitmain Antminer S1/S3 set GPIO for USB PowerJohn Crispin2015-10-262-1/+6
| | | | | | | | | Antminers using the stock bootloader will not hash without this GPIO set. Applies to DD and CC Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47261 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Send power to USB port on WNR2200John Crispin2015-10-191-4/+4
| | | | | | | | | | | | | This patch fixes ticket #15267 by enabling power on the WNR2200's USB port. At present, the USB port on the WNR2200 is non-functional due to it not receiving power. This patch defines an additional GPIO pin, but none of the current GPIO definitions have been modified. Signed-off-by: Riley Baird <BM-2cVqnDuYbAU5do2DfJTrN7ZbAJ246S4XiX@bitmessage.ch> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47236 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add Gainstrong MiniBox v1.0 support to trunkJohn Crispin2015-10-191-0/+85
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch supersedes the v1 from September 17th. Bumping the patch version - the MiniBox profile showed up under M, but since it's called 'Gainstrong MiniBox v1.0' now it looks out of place. Renamed the profile to gs-minibox-v1.mk to fix that. The following patch adds support for the Gainstrong MiniBox into trunk (or 'Designated Driver' :D ). Fixed items: - Inverted LED polarity (OOLITE seems to suffer from the same problem). - Changed uppercase MINIBOX_V1_ prefix as requested. - Prefixes are now gs_minibox_ similar to gs_oolite_ (same vendor). - Mention the vendor (Gainstrong) in code headers. Compiles fine, has been confirmed working by owners on 15.05. Question: I've seen some boards use tools/firmware-utils/src/mktplinkfw.c, the MiniBox images build fine without, so I'm wondering: do I need to add it in there as well? Any added benefit? Thank you Signed-off by: Stijn Segers <francesco.borromini@inventati.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47234 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Bitmain Antminer S1 & S3 cleanupJohn Crispin2015-10-192-7/+7
| | | | | | | | | | | | Sets the LEDs to boardname:color:led-name Sets the LAN to eth0 Other corrections such as the Machine Name and HWIDs v2 corrects the profile names in the Makefile and changes tabs to spaces in the Makefile 'define Device/' like the other devices. Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47221 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add WeIO Board SupportFelix Fietkau2015-09-241-0/+140
| | | | | | | | | | Add support for WeIO board (http://we-io.net). This board is based on Carambola2 board form 8Devices. Signed-off-by: Drasko DRASKOVIC <drasko.draskovic@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> [some cleanups] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47036 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for ap152 reference boardJohn Crispin2015-09-161-0/+141
| | | | | | Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46972 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath79: dev-eth: fix QCA9561 set phy interface mode and maskJohn Crispin2015-09-161-2/+7
| | | | | | | | | | QCA9563 and QCA9561 are two series of Qualcomm SoC Dragonfly. The only different is QCA9563 w/o internal switch. It has one GMAC with SGMII interface. But they have the same device ID(0x1150). So they share the same codes. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46971 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add TP-LINK TL-WDR3320 v2 supportJohn Crispin2015-09-141-0/+146
| | | | | | | | | | This patch adds support for TP-LINK TL-WDR3320 v2. This router uses a chinese version 2 firmware header,. Signed-off-by: Weijie Gao <hackpascal@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46934 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add kernel support for the OpenMesh MR1750 boardJohn Crispin2015-09-141-0/+129
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46926 3c298f89-4303-0410-b956-a3cf2f4a3e73
* target: ar71xx: add support for COMFAST CF-E316N v2 boardFelix Fietkau2015-09-111-0/+132
| | | | | | | | | | | | This adds full support (sans sysupgrading from vendor firmware) for the COMFAST CF-E316N v2 (aka CF-E316V2, CF-E316N-V2 and CF-E316Nv2.0, no FCC ID) by Shenzhen Four Seas Global Link Network Technology Co., Ltd (this company is actively refusing to provide GPL'd sources for the OpenWrt version they ship with the device, damn them). Signed-off-by: Paul Fertser <fercerpav@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46852 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for TP-Link TL-WDR6500 v2John Crispin2015-08-171-0/+141
| | | | | | | | | | | Signed-off-by: Weijie Gao <hackpascal@gmail.com> This patch adds support for TP-Link TL-WDR6500 v2. The firmware has a U-Boot header for kernel, and a TP-LINK v2 header for the whole firmware, so I have to create a new firmware creation method. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46663 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add 64kb bootloader mtd parser for tplinkpartJohn Crispin2015-08-171-6/+29
| | | | | | | | | | | Signed-off-by: Weijie Gao <hackpascal@gmail.com> This patch adds flash layout parser for TP-Link firmwares which have a 64kb bootloader. This is used for TP-Link TL-WDR6500 v2. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46662 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for Black SwiftJohn Crispin2015-08-171-0/+83
| | | | | | | | | | | | Add support for the Black Swift board: http://www.black-swift.com/ Took relevant parts and slightly adapted from: https://github.com/blackswift/openwrt/blob/master/bsb.patch Signed-off-by: Bruno Randolf <br1@einfach.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46651 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for Onion OmegaJohn Crispin2015-07-241-0/+84
| | | | | | | | | | | | This patch adds support for the Onion Omega. https://onion.io/omega Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Acked-by: Boken Lin <bl@onion.io> Tested-by: Jacky Huang <huangfangcheng@163.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46458 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for AP147-010 reference boardJohn Crispin2015-07-241-0/+125
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46457 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: remove the use of the obsolete IRQF_DISABLED flag in the NAND flash ↵Felix Fietkau2015-07-201-1/+1
| | | | | | | | driver (fixes #20125) Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46433 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Revert "ar71xx: Add support for Cisco-Linksys WAP4410N" (r46250)Felix Fietkau2015-07-191-285/+0
| | | | | | | | The commit is incomplete, it does not even build the mach-* file This reverts commit 6e6adcf7a197b1802cb728ddcccf05f890ca0574 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46425 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the devolo dLAN pro 1200+ WiFi acJohn Crispin2015-07-141-0/+189
| | | | | | Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46342 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the devolo dLAN pro 500 Wireless+John Crispin2015-07-141-0/+203
| | | | | | Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46338 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: compex wpe72 add space to include statementJohn Crispin2015-07-091-1/+1
| | | | | | Signed-off-by: Christian Mehlis <christian@m3hlis.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46284 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: compex wpj531 register usb supportJohn Crispin2015-07-091-0/+1
| | | | | | Signed-off-by: Christian Mehlis <christian@m3hlis.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46283 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: compex wpj531 fix setting mac address on ethernetJohn Crispin2015-07-091-6/+5
| | | | | | Signed-off-by: Christian Mehlis <christian@m3hlis.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46282 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: compex wpj531 fix ethernet registrationJohn Crispin2015-07-091-2/+2
| | | | | | | | | | | In fb6f62e97733312053ab593fcf68eea47a21169e several settings are set on the ethernet device, but they are not working. Fix Ethernet by setting the right values. Signed-off-by: Christian Mehlis <christian@m3hlis.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46281 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx remove IRQF_DISABLEDJohn Crispin2015-07-091-1/+1
| | | | | | | | | | no-op since 2.6.35 removed in Kernel 4.1 see https://lwn.net/Articles/380931/ Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46280 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for Cisco-Linksys WAP4410NJohn Crispin2015-07-071-0/+285
| | | | | | | | | | This patch adds support for the Cisco WAP4410N, an access point that uses the AR9132 SoC. Web upgrades from stock are not yet possible, UART access required for the initial flash. Signed-off-by: Ryan A Young <rayoung@utexas.edu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46250 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for D-Link DIR-615 rev. Ix boardJohn Crispin2015-07-071-0/+133
| | | | | | | | Based on trunk r46212. Signed-off-by: Jaehoon You <teslamint@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46248 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Use *_eth_cfg helper for Open Mesh MR900 boardsJohn Crispin2015-07-071-20/+1
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46241 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add Support for the Bitmain Antminer S3John Crispin2015-07-071-0/+98
| | | | | | | | | | This patch adds support for the Bitmain Antminer S3 Cryptocurrency Miner http://wiki.openwrt.org/toh/bitmain/s3 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46236 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: allow pci calibration fixup to work with ar9344John Crispin2015-07-071-0/+3
| | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46235 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for ap143Felix Fietkau2015-07-071-0/+142
| | | | | | Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46208 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rework patch for qca953x/956xFelix Fietkau2015-07-071-2/+16
| | | | | | | | | | | | | | | | | | | Patch cherry-picked from the following location: https://www.codeaurora.org/cgit/quic/qsdk/oss/system/openwrt/commit/?h=release/coconut_ioe4531_2.0&id=5c357bf6c763e4140dddcc9a3bc5f005525a9c0e Changelist, - add more register defines - add EHCI support - fix GPIO pin count to 18 - fix chained irq disabled - fix GMAC0/GMAC1 initial - fix WMAC irq number to 47 - merge the changes of dev-eth.c from the patch to file. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46207 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix ethernet initialization on QCA953x-based boards (TP-Link ↵Felix Fietkau2015-07-072-0/+13
| | | | | | | | | | | | TL-WR841N/ND v9, Compex WPJ531) The initialization routines for these boards were relying on some (wrong) defaults for the QCA953x ethernet. Make these defaults explicit to prevent breaking them when the QCA953x defaults are fixed. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46206 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add kernel support for EnGenius EPG5000.John Crispin2015-06-181-0/+178
| | | | | | Signed-off-by: Christian Beier <cb@shoutrlabs.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46047 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for TL-WR720N-v4.John Crispin2015-06-181-2/+1
| | | | | | | | | | The hardware should be almost the same as TL-WR720N-v3. WiFi and LAN networks were tested by "Lo Yuk Fai <loyukfai@gmail.com>". Failsafe and slider switch were tested by "Wong min <alpha080@gmail.com>". Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46046 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for compex wpj531John Crispin2015-06-181-0/+136
| | | | | | | | | | | tftpboot 0x80500000 openwrt-ar71xx-generic-wpj531-16M-squashfs-sysupgrade.bin erase 0x9f030000 +$filesize erase 0x9f680000 +1 cp.b $fileaddr 0x9f030000 $filesize Signed-off-by: Christian Mehlis <christian@m3hlis.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46045 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add Support for the Bitmain Antminer S1John Crispin2015-06-181-0/+98
| | | | | | | | | | | This patch adds support for the Bitmain Antminer S1 Cryptocurrency Miner http://wiki.openwrt.org/toh/bitmain/s1 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Acked-by: James Hilliard <james.hilliard1@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46044 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ar934x-nfc: allow ECC to be configured in software BCH modeFelix Fietkau2015-06-182-0/+5
| | | | | | | | | Some devices ship with NAND images that use BCH ECC. Let the driver know about that ECC mode so that it can be selected by machine files. Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46022 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: return limit as number of processed frames when re-scheduling NAPI pollFelix Fietkau2015-06-141-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45971 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar8216: Fix problem with AR8337 MAC swap handlingFelix Fietkau2015-06-144-0/+4
| | | | | | | | | | | | | | | | | | | | | AR8337 supports a configuration bit to swap MAC0 and MAC6. Currently this is set in general if an AR8337 is detected and causes issues with devices using an AR8334 (internally an AR8337, just less chip pins). And it might even cause issues with AR8337-based devices with different board designs. Swapping the MAC's however isn't needed for AR8337 in general. It's just needed in case of certain board designs (affected devices seem to be based on Atheros reference board AP135/136-010). Therefore this configuration bit should be moved to platform data. The patch includes the needed changes to the device initialization code of affected devices. Hopefully I didn't miss any .. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45970 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix 100/10mbps ethernet link issues on mynet range extenderFelix Fietkau2015-06-141-0/+20
| | | | | | | | | | | | | | | | | | The mynet range extender hardware is suffering from ethernet link loss when booting with a recent openwrt image. This only happens on 100mbps links, with 1Gbps speed the link was fine. The cause of the problem is that the AR8035 PHY (aka F1E) requires turning on and off the special TX delay setting depending on the speed of the link. The 10mbps mode only needed the proper pll value, which was extracted from the vendor code. Reported-by: Pascal Paradis Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45954 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for the Meraki MR12 & MR16John Crispin2015-05-232-0/+233
| | | | | | | | | | This patch is to add support for the Meraki MR12 and MR16 Access Points. Currently everything is working, minus the 2nd NIC interface on the MR12 which is built into the SoC. Signed-off-by: Chris R Blake <chrisrblake93 at gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45726 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add status led found on ew-dorin boardsLuka Perkov2015-05-101-1/+7
| | | | | | Signed-off-by: Catrinel Catrinescu <cc@80211.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45656 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: do general formatting on wnr2000-v4Felix Fietkau2015-05-081-43/+52
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45640 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix spelling, add copyright on wnr2000-v4Felix Fietkau2015-05-081-2/+3
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45639 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for Green WAN LED on wnr2000-v4Felix Fietkau2015-05-081-0/+4
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45638 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for green LAN LEDS for wnr2000-v4Felix Fietkau2015-05-081-8/+40
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45637 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix amber WAN LED setting for wnr2000-v4Felix Fietkau2015-05-081-1/+1
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45636 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: make WLAN button RFKILL on wnr2000-v4Felix Fietkau2015-05-081-1/+1
| | | | | | | | | Users will now be provided with the inherent wifi toggle functionality of /etc/rc.button/rfkill Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45635 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: set all buttons to be active_low on wnr2000-v4Felix Fietkau2015-05-081-0/+3
| | | | | | | | | Originally pressing a button would trigger a release state and vice-versa, as observed from hotplug.d. Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45634 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-14 22:22:42 +0000