aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/base-files/etc/board.d/02_network
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: WDR4300: Fixed default VLAN orderDavid Pinilla Caparrós2016-06-221-1/+1
| | | | | | Reordered the VLANs so the LAN ports are set to VLAN 1 and the WAN port is set to VLAN 2, as in the other routers in the config file. Moreover, this model had this VLAN mapping in OpenWRT Chaos Calmer. It seems that the VLAN were switched when fixing a bug in the port mapping ( OpenWRT changeset 47799 ) Signed-off-by: David Pinilla Caparrós <dpinitux@gmail.com>
* ar71xx: add support for OpenEmbed SOM9331Allan Nick Pedrana2016-06-221-0/+1
| | | | | | | | This patch adds the target profile SOM9331 and configures hardware functionality for the 3x Eth Ports & corresponding LED's, the USB Host, the USART to USB bridge and the System LED. Signed-off-by: Allan Nick Pedrana <nik9993@gmail.com>
* ar71xx: add WRTnode2Q supportKeLei Liang2016-06-221-1/+2
| | | | Signed-off-by: KeLei Liang <xzmu@wrtnode.com>
* ar71xx: update bombZoltan HERPAI2016-06-221-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ar71xx: split tp-link image building code into a separate file ar71xx: split legacy image building code into a separate file ar71xx: split ubnt image building code into a separate file ar71xx: move generic device image definitions to a separate file ar71xx: move nand device image definitions to a separate file ar71xx: Add support for initramfs images for OpenMesh devices ar71xx: Generate sysupgrade images for OpenMesh devices ar71xx: Move OpenMesh image target validation into subfunction ar71xx: Allow OpenMesh CE images with more than 3 files ar71xx: add kernel support for the OpenMesh OM2P-HSv3 ar71xx: add user-space support for the OpenMesh OM2P-HSv3 ar71xx: enable sysupgrade for the OpenMesh OM2P-HSv3 package/om-watchdog: add OpenMesh OM2P-HSv3 support package/uboot-envtools: add OpenMesh OM2P-HSv3 support ar71xx: add OM2P-HSv3 to the OM2P profile ar71xx: add kernel support for the OpenMesh MR1750v2 ar71xx: add user-space support for the OpenMesh MR1750v2 ar71xx: enable sysupgrade for the OpenMesh MR1750v2 package/om-watchdog: add OpenMesh MR1750v2 support package/uboot-envtools: add OpenMesh MR1750v2 support ar71xx: extract ath10k wifi board.bin for the OpenMesh MR1750v2 board ar71xx: add MR1750v2 to the MR1750 profile ar71xx/cpe510: split profile into 2 profiles cpe210 and cpe510 ar71xx/cpe510: use second wifi calibration table ar71xx: add GPIO pin for usb power switch for RouterBOARD 912 ar71xx: switch ordering and template to improve readability ar71xx: Fix TL-WR841N v11 LEDs, use separate machine Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* ar71xx: Add support for Ubiquiti UniFi AP AC PROP.Wassi2016-06-201-0/+5
| | | | | Add support for the Ubiquiti UniFi AP AC PRO Signed-off-by: P.Wassi <p.wassi at gmx.at>
* ar71xx: Rename unifiac to unifiac-liteP.Wassi2016-06-201-1/+1
| | | | | | | To avoid confusion with different unifiac devices, rename existing target "unifiac" to "unifiac-lite", before "unifiac-pro" is introduced. Signed-off-by: P.Wassi <p.wassi at gmx.at>
* ar71xx: add support for TP-LINK TL-WR842N/ND v3Cezary Jackiewicz2016-06-201-0/+1
| | | | | | | | | | | - CPU QCA9531-BL3A - RAM: 64MB - flash: 16MB - USB AP143 platform, similar to tl-wr841n v10/v11, but with USB Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
* ar71xx: add TP-Link TL-WR810N supportJohn Crispin2016-06-191-0/+1
| | | | | | | | | This patch adds support for the TP-Link TL-WR810N. https://wiki.openwrt.org/toh/tp-link/tl-wr810n Signed-off-by: Jens Steinhauser <jens.steinhauser@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49286 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for the OMYlink OMY-G1John Crispin2016-04-261-0/+1
| | | | | | | | | | https://wiki.openwrt.org/toh/omylink/omy-g1 http://www.omylink.com/ Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49258 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add TP-Link TL-WA901ND-v4 supportJohn Crispin2016-04-091-0/+1
| | | | | | Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49158 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for Compex WPJ342John Crispin2016-04-091-0/+5
| | | | | | | | | | | | OpenWrt can be flashed with following uboot commands: tftpboot 0x80500000 openwrt-ar71xx-generic-wpj342-16M-squashfs-sysupgrade.bin erase 0x9f030000 +$filesize cp.b $fileaddr 0x9f030000 $filesize Signed-off-by: Christian Mehlis <christian@m3hlis.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49157 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for ap120cLuka Perkov2016-03-231-0/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49082 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the Telldus TellStick ZNet LiteJohn Crispin2016-03-101-0/+5
| | | | | | Signed-off-by: Micke Prag <micke.prag@telldus.se> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48977 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Support for Ubiquiti UniFi AP AC LITEJohn Crispin2016-02-121-0/+1
| | | | | | | Add support for the Ubiquiti UniFi AP AC LITE Signed-off-by: P.Wassi <p.wassi at gmx.at> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48711 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Added support for TL-WA801NDv3John Crispin2016-02-121-1/+2
| | | | | | Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48705 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: board.d: fix switch defaults on dLAN pro 1200+ WiFi acJohn Crispin2016-01-191-3/+2
| | | | | | | | transparent for vlans as originally committed Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48358 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for Netgear WPN824NJohn Crispin2016-01-191-1/+2
| | | | | | | | | | | | | | | | Add support for Netgear WPN824N. Hardware specs: * AR7240, 4 LAN ports, 1 WAN port * AR9285 WLAN * 32 MB RAM * 4 MB Flash * 16 LEDs (LAN, WAN and Power/Status contain two LEDs for dual color effect) * 3 Buttons (not supported) Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48356 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix ap152 supportFelix Fietkau2016-01-101-0/+1
| | | | | | | | | | - ethernet gigabit pll - switch configuration - sysupgrade Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48187 3c298f89-4303-0410-b956-a3cf2f4a3e73
* V2 ar71xx : Add Support for the Bitmain Antrouter R1John Crispin2016-01-011-0/+1
| | | | | | | | | | This patch adds support for the Bitmain Antrouter R1 http://wiki.openwrt.org/toh/bitmain/r1 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48058 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for AirTight Networks C-55John Crispin2015-12-231-0/+1
| | | | | | | | This patch is to add support for the AirTight Networks C-55 Access Point Signed-off-by: Chris R Blake <chrisrblake93@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47973 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: PowerCloud CR5000 openwrt configurationFelix Fietkau2015-12-191-0/+5
| | | | | | | | | | | | OpenWrt configuration part of support for the PowerCloud Systems CR5000. The CR5000 is a dual-band 802.11n wireless router with 8MB flash, 64MB RAM, (unused on stock firmware) USB 2.0 port and five port gigabit ethernet switch. The CR5000 was sold as hardware for the Skydog cloud-managed router service. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47946 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: PowerCloud CR3000 OpenWrt configurationFelix Fietkau2015-12-191-0/+6
| | | | | | | | | | | | OpenWRt configuration part of support for the PowerCloud Systems CR3000. The CR3000 is a 802.11n 2.4 GHz wireless router with 8MB flash, 64MB RAM, a four port gigabit ethernet switch, and a fast ethernet wan port that was sold by PowerCloud Systems as hardware for the Skydog cloud-managed router service. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47945 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: PowerCloud CAP324 OpenWrt configurationFelix Fietkau2015-12-191-0/+4
| | | | | | | | | | | | | | | Openwrt configuration part of support for PowerCloud CAP324 Cloud AP. The CAP324 Cloud AP is a device sold by PowerCloud Systems who's stock firmware (CloudCommand) provides 'cloud' based managment of large numbers access points. The CAP324 is a dual-band 802.11n wireless access point with 16MB flash and 128MB RAM and single gigabit ethernet port. It can be powered via PoE or a wall wart. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47944 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for TRENDnet TEW-823DRUJohn Crispin2015-12-171-0/+1
| | | | | | | | | | | | | | Add support for TRENDnet TEW-823DRU: - cpu: QCA9558 @720MHz - flash: 16MB - ram: 256MB - 4+1 RJ45 100/1000Mbps - wifi: QCA9558 (bgn) and QCA9880-BR4A (ac) - 1x USB 2.0 Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47927 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for Cisco's MR18John Crispin2015-12-121-0/+1
| | | | | | | | | | | This patch adds support for Cisco's MR18. Detailed instructions for the flashing the device can be found in the OpenWrt forum thread: <https://forum.openwrt.org/viewtopic.php?id=59248> Signed-off-by: Chris R Blake <chrisrblake93@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47878 3c298f89-4303-0410-b956-a3cf2f4a3e73
* all: drop old uci-defaults.shJo-Philipp Wich2015-12-111-1/+1
| | | | | | | | | Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one and update all users accordingly. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47867 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for Wallys DR344John Crispin2015-12-111-0/+1
| | | | | | | | This patch is for Wallys DR344 support under OpenWRT Signed-off-by: Philippe Duchein <wireless-dev@duchein.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47847 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix switch port mapping for tl-wdr4300/3600Felix Fietkau2015-12-061-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47799 3c298f89-4303-0410-b956-a3cf2f4a3e73
* all: remove dummy ucidef_set_interface_loopback() from board.dJo-Philipp Wich2015-12-031-2/+0
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47744 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: board.d: add missing include (#21296)Jo-Philipp Wich2015-12-031-0/+1
| | | | | | | | | Include /lib/functions/system.sh in 02_network to define missing mtd_get_mac_binary() procedure. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47723 3c298f89-4303-0410-b956-a3cf2f4a3e73
* board.d: remove redundant ucidef_set_interfaces_lan_wan() callsJo-Philipp Wich2015-12-031-21/+0
| | | | | | | | | | This removes calls to ucidef_set_interfaces_lan_wan() and ucidef_set_interfaces_lan() on boards where all relevant info can be inferred from the switch definition. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47722 3c298f89-4303-0410-b956-a3cf2f4a3e73
* board.d: merge ucidef_add_switch() and ucidef_add_switch_ports()Jo-Philipp Wich2015-12-031-87/+44
| | | | | | | | | | | | This changes uci-defaults-new.sh, config_generate and all relevant board.d files in order combine ucidef_add_switch() and ucidef_add_switch_ports() into a single function. Also removes now superfluous enable and reset arguments. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47721 3c298f89-4303-0410-b956-a3cf2f4a3e73
* base-files: uci-defaults-new: remove reset/enable args of ucidef_add_switch()Jo-Philipp Wich2015-12-031-1/+2
| | | | | | | | | | | | | | | Out of 69 switch definitions, only 3 pass something different than "1" as values for reset and enable, with one of those three being invalid. This change ... * removes the reset and enable arguments from ucidef_add_switch() * unconditionally writes reset:1 and enable:1 to JSON * converts the three users of nonstandard values to ucidef_add_switch_attr() Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47720 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: switch network and led defaults to board detection frameworkJo-Philipp Wich2015-11-261-0/+555
| | | | | | | | | Also translate ucidef_add_switch_vlan() to ucidef_add_switch_ports() for better switch topology mapping and improved default config generation. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47663 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Revert "ar71xx: migrate led and network setup to board detection framework"Jo-Philipp Wich2015-11-251-541/+0
| | | | | | | | The board detect code needs more fixes in order to work properly. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47641 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add GL-Domino Pi support V3John Crispin2015-11-241-0/+1
| | | | | | | | This is the patch for GL-Domino Pi V3. Updated against the latest trunk. Signed-off-by: alzhao<alzhao@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47622 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add GL-AR300 support V3John Crispin2015-11-241-0/+6
| | | | | | | | This is the patch for GL-AR300 V3, tested against the latest trunk. Signed-off-by: alzhao<alzhao@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47621 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add GL-AR150 support V3John Crispin2015-11-241-0/+1
| | | | | | | | This is the 3rd version. Modified against the latest trunk. Signed-off-by: alzhao<alzhao@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47620 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix network default config of the TEW-732BRJo-Philipp Wich2015-11-221-0/+1
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47595 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the devolo dLAN HotspotJohn Crispin2015-11-211-0/+1
| | | | | | Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47554 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: migrate led and network setup to board detection frameworkJo-Philipp Wich2015-11-201-0/+531
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47534 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-05 11:54:12 +0000