aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot
Commit message (Collapse)AuthorAgeFilesLines
* uboot-envtools: add config for WBMR300 (lantiq)Felix Fietkau2016-06-241-0/+5
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-lantiq: get rid of bogus profile dependenciesFelix Fietkau2016-06-241-43/+43
| | | | | | Turn them into subtarget dependencies instead Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-lantiq: vrx200 - lzma compress gphy firmwareMathias Kresin2016-06-242-18/+29
| | | | | | | | | | | | The default bootloader partition of some devices is to small for an u-boot with uncompressed gphy firmware(s). Instead of increasing the bootloader partition size, in compare to the stock firmware, compress the firmware. This would allow the bootloader of at least the FritzBox 3370 as well as the bootloader of the VGV7510KW22 to fit into the bootloader partition of the stock firmware. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: vrx200 - add support for dual nor flashMathias Kresin2016-06-242-12/+30
| | | | | | | | Based on a submission to the uboot-lantiq repo by Eddi De Pieri. Devices like the xrx200 Arcadyan VGV7519 are using two NOR flash chips. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: VGV7510KW22 - cleanup board configMathias Kresin2016-06-241-60/+3
| | | | | | | | | | | | | | According to the author, all SPI related configs are copy & paste leftovers. Which makes sense since nothing is connected to the SPI bus on this device. The NOR SPL isn't required for this board, since the NOR is directly memory mapped. Allow to overwrite the env in ram while using brn variant. Do not set the power GPIO pin twice. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: Add Arcadyan VGV7519 supportMathias Kresin2016-06-242-1/+309
| | | | | | | | | | | | | | | | Based on a submission to the uboot-lantiq repo by Eddi De Pieri. Major cleanup and addition of brnboot second stage u-boot was done by me. The second stage brnboot u-boot is untested, since the brnboot prompt is secured by a still unknown password. But should work. The former ram values are replaced with the ram values extracted from the original brnboot. The old ones didn't worked with the ramboot image. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: ARV752DPW - use correct switch driverZoltan HERPAI2016-06-241-1/+1
| | | | | | There is no RTL8206 switch driver. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-lantiq: VGV7510KW22 - use ddr ram params from brnbootZoltan HERPAI2016-06-241-4/+4
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* ramips: add initial support for SamKnows SK-WB8Andrew Yong2016-06-241-1/+2
| | | | Signed-off-by: Andrew Yong <me@ndoo.sg>
* ipq806x: update bombZoltan HERPAI2016-06-232-0/+30
| | | | | | | | | | | | | | | | | ipq806x: Add support for linux-4.4 ipq806x: Add Archer C2600 to image/Makefile ipq806x/base-files: Add Archer C2600 LEDs and board ipq806x/base-files: Add support for Archer C2600 ipq806x/base-files: extract ath10k caldata ipq806x/dts: Add Archer C2600 DTS ipq806x: enable PM support ipq806x: add a default profile ipq806x: add diag.sh script ipq806x: qcom rpm fix support for smb208 mtd: add linksys_bootcount for ipq806x uboot-envtools: add ipq806x support Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* ar71xx: update bombZoltan HERPAI2016-06-221-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ar71xx: split tp-link image building code into a separate file ar71xx: split legacy image building code into a separate file ar71xx: split ubnt image building code into a separate file ar71xx: move generic device image definitions to a separate file ar71xx: move nand device image definitions to a separate file ar71xx: Add support for initramfs images for OpenMesh devices ar71xx: Generate sysupgrade images for OpenMesh devices ar71xx: Move OpenMesh image target validation into subfunction ar71xx: Allow OpenMesh CE images with more than 3 files ar71xx: add kernel support for the OpenMesh OM2P-HSv3 ar71xx: add user-space support for the OpenMesh OM2P-HSv3 ar71xx: enable sysupgrade for the OpenMesh OM2P-HSv3 package/om-watchdog: add OpenMesh OM2P-HSv3 support package/uboot-envtools: add OpenMesh OM2P-HSv3 support ar71xx: add OM2P-HSv3 to the OM2P profile ar71xx: add kernel support for the OpenMesh MR1750v2 ar71xx: add user-space support for the OpenMesh MR1750v2 ar71xx: enable sysupgrade for the OpenMesh MR1750v2 package/om-watchdog: add OpenMesh MR1750v2 support package/uboot-envtools: add OpenMesh MR1750v2 support ar71xx: extract ath10k wifi board.bin for the OpenMesh MR1750v2 board ar71xx: add MR1750v2 to the MR1750 profile ar71xx/cpe510: split profile into 2 profiles cpe210 and cpe510 ar71xx/cpe510: use second wifi calibration table ar71xx: add GPIO pin for usb power switch for RouterBOARD 912 ar71xx: switch ordering and template to improve readability ar71xx: Fix TL-WR841N v11 LEDs, use separate machine Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* Update the U-Boot package to upstream 2016.05 version. This versionMarek Vasut2016-06-203-109/+8
| | | | | | | | improves overall performance of the platform, since it fixes cache problems that prevented the cache from operating fully in previous releases. Signed-off-by: Marek Vasut <marex@denx.de>
* treewide: fix replace nbd@openwrt.org with nbd@nbd.nameFelix Fietkau2016-06-191-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49379 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-kirkwood: New ubi flash format for IconnectLuka Perkov2016-06-191-12/+8
| | | | | | | | Migrate Iconnect to new ubi image style like for dockstar. Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49368 3c298f89-4303-0410-b956-a3cf2f4a3e73
* target: socfpga: Add Altera SoCFPGA supportLuka Perkov2016-06-193-0/+263
| | | | | | | | | This patch adds support for the Altera SoCFPGA target. Both generic target and Terasic SoCkit boards are supported. Signed-off-by: Marek Vasut <marex@denx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49367 3c298f89-4303-0410-b956-a3cf2f4a3e73
* zynq: Add Zybo device supportJohn Crispin2016-04-261-0/+5
| | | | | | Signed-off-by: Jason Wu <jason.wu.misc@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49257 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Zynq: Add Zedboard device supportJohn Crispin2016-04-261-0/+5
| | | | | | | Tested-by: Joe Zhang <jz21082@gmail.com> Signed-off-by: Jason Wu <jason.wu.misc@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49256 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: uboot-envtools on BTHOMEHUBV3AJohn Crispin2016-04-261-0/+3
| | | | | | | | Generate fw_env.config for BTHOMEHUBV3A. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49236 3c298f89-4303-0410-b956-a3cf2f4a3e73
* oxnas: add support for Akitio MyCloud miniHauke Mehrtens2016-04-191-0/+1
| | | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49197 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-envtools: add OpenMesh OM5P-ACv2 supportJohn Crispin2016-04-091-0/+1
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49153 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-envtools: add OpenMesh OM5P-AC supportJohn Crispin2016-04-091-0/+1
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49146 3c298f89-4303-0410-b956-a3cf2f4a3e73
* package: uboot-sunxi: various changesZoltan HERPAI2016-03-2925-210/+9835
| | | | | | | | | | | | | | - bump to 2016.03 - add bugfixes related to 2016.03 update - sync DTS files with mainline - add support for non-standard uEnv.txt - add initial support for Theobroma A31-yQ7 devboard Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49089 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-mvebu: add packageLuka Perkov2016-03-252-0/+102
| | | | | | | Signed-off-by: Andrej Vlasic <andrej.vlasic@sartura.hr> Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49088 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-envtools: add support for ap120cLuka Perkov2016-03-231-0/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49083 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-zynq: Update to U-Boot 2016.03 releaseJohn Crispin2016-03-231-2/+2
| | | | | | Signed-off-by: Jason Wu <jason.wu.misc@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49078 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Add support for Xiaomi MiWiFi NanoJohn Crispin2016-03-161-1/+2
| | | | | | | | | | | | | | | Xiaomi MiWiFi Nano is based on Mediatek MT7628 with 64MB ram 16MB flash Signed-off-by: Noble Pepper <openwrtmail@noblepepper.com> v3 includes changes suggested by L. D. Pinney & Karl Palsson- Eliminate en25q64 (4MB) flash chip Alphabetization Remove hyphen in model Rename profile from miwifinano.mk to xiaomi.mk Add gpios that are attached to leds git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49024 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-kirkwood/goflexhome: explicit define the size of the last partitionLuka Perkov2016-03-141-1/+1
| | | | | | | | | Explicit sets the size of the mtdparts, because the kernel has also an explicit value. If they have diffent sizes the ubi won't be detected. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49018 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-kirkwood/goflexhome: add forgotten include openwrt-kirkwood-common.h"Luka Perkov2016-03-141-0/+9
| | | | | | | | | otherwise the uboot is missing important commands like bootz Signed-off-by: Martin Mueller <mm@sig21.net> Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49017 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-kirkwood/goflexhome: update bootargs to use new ubi styleLuka Perkov2016-03-141-0/+30
| | | | | | | | | | Since switching to new ubi(kernel,squashfs,ubifs) layout, the kernel lies in a ubi volume. Dropping the mtd parts because the mtd layout is saved in the device-tree, which is appended to the zImage. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49016 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot/kirkwood: correct mtdparts + cmdline for new ubifs on dockstarLuka Perkov2016-03-141-12/+6
| | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49012 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-oxnas: fix typo leading to tool not being builtJohn Crispin2016-02-251-1/+1
| | | | | | | | Fixes #21907 Signed-off-by: Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48764 3c298f89-4303-0410-b956-a3cf2f4a3e73
* zynq: add new targetJohn Crispin2016-02-121-0/+115
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Xilinx ZC702 Dev board Zynq target is using 4.4 kernel and mainline 2016.1 u-boot. Patch is tested with Xilinx ZC702 Dev board with SD boot mode. known issues: - no QSPI driver in 4.4 kernel: no QSPI flash support - USB is not working in 4.4 kernel Signed-off-by: Jason Wu <jason.wu.misc@gmail.com> create mode 100644 package/boot/uboot-zynq/Makefile create mode 100644 target/linux/zynq/Makefile create mode 100644 target/linux/zynq/base-files.mk create mode 100755 target/linux/zynq/base-files/etc/board.d/02_network create mode 100644 target/linux/zynq/base-files/etc/config/network create mode 100644 target/linux/zynq/base-files/etc/inittab create mode 100644 target/linux/zynq/config-4.4 create mode 100644 target/linux/zynq/image/Makefile create mode 100755 target/linux/zynq/image/mkits.sh create mode 100644 target/linux/zynq/patches-4.4/0001-arm-dts-zynq-zc702.dts-Set-default-rdinit-to-sbin-in.patch create mode 100644 target/linux/zynq/profiles/zc702.mk git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48697 3c298f89-4303-0410-b956-a3cf2f4a3e73
* packages: uboot-sunxi: fix SATA powerup on BananaproZoltan HERPAI2016-02-021-0/+25
| | | | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48619 3c298f89-4303-0410-b956-a3cf2f4a3e73
* grub2: switch back to installing to STAGING_DIR_HOSTFelix Fietkau2016-01-211-0/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48424 3c298f89-4303-0410-b956-a3cf2f4a3e73
* packages: bump uboot-mxs to 2016.01, refresh patchesZoltan HERPAI2016-01-193-18/+7
| | | | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48374 3c298f89-4303-0410-b956-a3cf2f4a3e73
* packages: bump uboot-sunxi to 2016.01Zoltan HERPAI2016-01-152-31/+3
| | | | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48252 3c298f89-4303-0410-b956-a3cf2f4a3e73
* packages: bump uboot-sunxi to 2016.01-rc3, along with H3 PSCI/SMP patchesZoltan HERPAI2016-01-086-2/+211
| | | | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48154 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-imx6: add support for i.MX6q SABRE boardLuka Perkov2015-12-281-0/+5
| | | | | | | | | | U-boot ships with the `mx6qsabresd` configuration file to configure a bootloader suitable for booting the Freescale i.MX6q SABRE evaluation board from SD card. Expose this option in the uboot-imx6 Makefile. Signed-off-by: Keno Fischer <keno@juliacomputing.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48014 3c298f89-4303-0410-b956-a3cf2f4a3e73
* packages: bump uboot-sunxi to enable H3 supportZoltan HERPAI2015-12-224-330/+14
| | | | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47959 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: PowerCloud CR5000 openwrt configurationFelix Fietkau2015-12-191-0/+1
| | | | | | | | | | | | OpenWrt configuration part of support for the PowerCloud Systems CR5000. The CR5000 is a dual-band 802.11n wireless router with 8MB flash, 64MB RAM, (unused on stock firmware) USB 2.0 port and five port gigabit ethernet switch. The CR5000 was sold as hardware for the Skydog cloud-managed router service. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47946 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: PowerCloud CR3000 OpenWrt configurationFelix Fietkau2015-12-191-0/+1
| | | | | | | | | | | | OpenWRt configuration part of support for the PowerCloud Systems CR3000. The CR3000 is a 802.11n 2.4 GHz wireless router with 8MB flash, 64MB RAM, a four port gigabit ethernet switch, and a fast ethernet wan port that was sold by PowerCloud Systems as hardware for the Skydog cloud-managed router service. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47945 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: PowerCloud CAP324 OpenWrt configurationFelix Fietkau2015-12-191-0/+1
| | | | | | | | | | | | | | | Openwrt configuration part of support for PowerCloud CAP324 Cloud AP. The CAP324 Cloud AP is a device sold by PowerCloud Systems who's stock firmware (CloudCommand) provides 'cloud' based managment of large numbers access points. The CAP324 is a dual-band 802.11n wireless access point with 16MB flash and 128MB RAM and single gigabit ethernet port. It can be powered via PoE or a wall wart. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47944 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-omap: update to 2015.10John Crispin2015-12-1712-332/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | - tested on Beagleboard C4 - remove upstream patches - disable THUMB mode on OMAP3 this increases binary size (remove CONFIG_SYS_THUMB_BUILD) - reduce SPL size by disabling EXT feature (remove CONFIG_SPL_EXT_SUPPORT) this fixes 2015.07 and 2015.10-rc3 Beagleboard C4 booting which were broken by upstream commit with id: bd2c4522c26d535515aebca52d27c004a7e0c05c Arm THUMB mode is broken because of an yet unknown errata see: http://lists.denx.de/pipermail/u-boot/2015-August/225793.html - backport upstream fix that was introduced in 2015.10-rc5 and was not fixed in 2015.10 final Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47924 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-lantiq: fix build with gcc5John Crispin2015-12-113-0/+222
| | | | | | Signed-off-by: Mathias Kresin <openwrt@kresin.me> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47863 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-imx6: fix build with gcc-5John Crispin2015-11-244-0/+266
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47611 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-omap: fix build with gcc-5Hauke Mehrtens2015-11-207-6/+280
| | | | | | | | | This fixes some problems with gcc-5. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47539 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-kirkwood: fix build with gcc-5Hauke Mehrtens2015-11-202-1/+88
| | | | | | | | | This backports a patch from upstream u-boot to make it compile with gcc-5. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47537 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-oxnas: fix build with gcc-5Hauke Mehrtens2015-11-202-6/+88
| | | | | | | | | This backports a patch from upstream u-boot to make it compile with gcc-5. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47535 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-mxs: fix build with gcc-5Hauke Mehrtens2015-11-202-29/+12
| | | | | | | | | | | gcc-5 handles inline without static differently and that makes uboot-mxs fail to build. Remove the inline so it gets exported and can be used in other functions. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47533 3c298f89-4303-0410-b956-a3cf2f4a3e73
* packages: uboot-sunxi: update Lamobo R1 patchZoltan HERPAI2015-11-191-177/+185
| | | | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47516 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 00:46:34 +0000