aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: add model detection for the MERCURY MW4530R boardGabor Juhos2013-07-281-0/+3
| | | | | | | | | | | | Mercury MW4530R is a TP-Link TL-WDR4310 clone but with a much lower price tag (~ $40). This patch is tested to work at trunk r37525. Signed-off-by: Leon Xu <ylxu72@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3856/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37570 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: TEW632BRP has buttons 'active low', fix board configGabor Juhos2013-07-281-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Looks like trunk@37090 has changed the logic that determines if router's button was pressed. This resulted in TEW632BRP always booting into failsafe mode because it detected pressed button (which was not pressed). Measure with voltmeter has shown that buttons on this router are actually active-low. This patch reflects this fact in board configuration and fixes 'load info failsafe mode' issue. Note: it looks like Trendnet TEW632BRP and a close relative to TEW-652BRP V1.0 and D-Link DIR-615C1, so same problem may exist on those routers as well. This patch doesn't affect routers other than 632BRP and unfortunately I do not have hardware to test this issue with other routers. This patch fixes #13893 and is tested on actuall Trendnet TEW632BRP. Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37569 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add MPR-A1 supportJohn Crispin2013-07-2710-0/+143
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37568 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: gpio driver should not set gpio to input when irq is queriredJohn Crispin2013-07-271-16/+24
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37567 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add back dwc_otg driverJohn Crispin2013-07-272-0/+24538
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37566 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: MPR-A2 should use memory auto detectionJohn Crispin2013-07-271-4/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37565 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: enable usb phy support on rt5350John Crispin2013-07-271-0/+10
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37564 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: switch back to dwc_otg ... dwc2 seems to not work well with 3G modemsJohn Crispin2013-07-2713-15/+15
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37563 3c298f89-4303-0410-b956-a3cf2f4a3e73
* strict_strtoul is obsolete, use kstrtoul insteadJohn Crispin2013-07-2713-53/+53
| | | | | | | | based on http://patchwork.openwrt.org/patch/3827/ Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37562 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: unbreak asiarf dts filesJohn Crispin2013-07-263-6/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37561 3c298f89-4303-0410-b956-a3cf2f4a3e73
* openvpn: update to 2.3.2Felix Fietkau2013-07-262-61/+2
| | | | | | | | | | | | this patches updates openvpn to v2.3.2 and adds a PKG_MD5SUM to the Makefile This release fixes a memory access violation when cipher none is used on ar71xx - at least with my config Signed-off-by: Peter Wagner <tripolar@gmx.at> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37560 3c298f89-4303-0410-b956-a3cf2f4a3e73
* 6relayd: Overridden DNS should affect DHCPv6Steven Barth2013-07-261-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37558 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uhttpd: update to latest version, fixes issues with POST and keep-alive (#13940)Felix Fietkau2013-07-261-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37556 3c298f89-4303-0410-b956-a3cf2f4a3e73
* authsae: add myself as a maintainerFelix Fietkau2013-07-261-0/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37555 3c298f89-4303-0410-b956-a3cf2f4a3e73
* authsae: adapt uci scripts to use authsaeFelix Fietkau2013-07-263-6/+73
| | | | | | | | | | | | This patch modifies the uci scripts to be able to start meshd-nl80211 for encrypted mesh networks, therefor a new script (authsae.sh) is inserted. Signed-off-by: Emanuel Taube <emanuel.taube@gmail.com> [etienne.champetier@free.fr: just update mac80211.sh path] Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37554 3c298f89-4303-0410-b956-a3cf2f4a3e73
* authsae 80211s authentication daemonFelix Fietkau2013-07-261-0/+42
| | | | | | | | | | | | | This patch adds authsae open80211s authentication daemon (http://open80211s.org) It's a rework of Peter Naulls patch (http://patchwork.openwrt.org/patch/1350/) I've excluded the sample conf file as it's useless when used with mac80211.sh (Emanuel Taube patch) It now link against libnl-tiny instead of libnl (patch merged in authsae git) Authsae is 58 Ko (OPENSSL_WITH_EC option adds 35Ko to libopenssl) Signed-off-by: Peter Naulls <peter@chocky.org> Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37553 3c298f89-4303-0410-b956-a3cf2f4a3e73
* libconfig: add from /packages, update to latest version, add myself as ↵Felix Fietkau2013-07-261-0/+58
| | | | | | | | maintainer Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37552 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ubox: update to git headJo-Philipp Wich2013-07-261-2/+2
| | | | | | | | - discard vfat labels with only spaces - support using swap files - support extroot when required kmods and block-mount are installed on jffs2 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37551 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add profile and fixup image generation for the TL-MR10U boardGabor Juhos2013-07-262-1/+12
| | | | | | | | | | | | | | | Create a separate board profile and update the profile name in image/makefile. Also use the correct machtype string in kernel command line. Based on andelf's patch: http://andelf.diandian.com/post/2013-05-22/40050677370 Signed-off-by: Oleg Titov <oleg.titov@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3840/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37550 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils/mktplinkfw: add support for the TL-MR10U boardGabor Juhos2013-07-261-0/+6
| | | | | | | | | | | Based on andelf's patch: http://andelf.diandian.com/post/2013-05-22/40050677370 Signed-off-by: Oleg Titov <oleg.titov@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3840/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37549 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user-space support for the TL-MR10U boardGabor Juhos2013-07-264-0/+6
| | | | | | | | | | | Based on andelf's patch: http://andelf.diandian.com/post/2013-05-22/40050677370 Signed-off-by: Oleg Titov <oleg.titov@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3840/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37548 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add kernel support for the TL-MR10U boardGabor Juhos2013-07-262-3/+39
| | | | | | | | | | | | | | Based on andelf's patch: http://andelf.diandian.com/post/2013-05-22/40050677370 [juhosg: extend WR703N code to handle the TL-MR10U instead of adding a separate mach-tl-mr10u file]] Signed-off-by: Oleg Titov <oleg.titov@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3840/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37547 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update 3.10 to 3.10.3Gabor Juhos2013-07-2636-189/+65
| | | | | | | | Also refresh 3.10 patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37546 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: be consistent with formatting styleLuka Perkov2013-07-2619-194/+231
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37545 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: remove stale phy register setup properties from dts filesJohn Crispin2013-07-254-15/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37544 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: add TP-Link TDW8970 image generationJohn Crispin2013-07-251-0/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37543 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: add profile for TP-Link TDW8970John Crispin2013-07-251-0/+11
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37542 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: add devicetree for TP-Link TDW8970John Crispin2013-07-251-0/+248
| | | | | | Signed-of-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37541 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: fix initramfs image generation for lzmaloader based imagesJohn Crispin2013-07-251-4/+10
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37540 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: make macs loadable from mtd partitionsJohn Crispin2013-07-251-34/+72
| | | | | | | | This is a really ugly hack but it will have to do until we copy the ramips patches to the lantiq tree Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37539 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: add a hook to make leds work on the secondary usb busJohn Crispin2013-07-251-1/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37538 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: update pcie driverJohn Crispin2013-07-251-1049/+1895
| | | | | | | | This is an intermediate commit until the new OF driver is functional. Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37537 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac8021: add ath9k pcie id for AR9381John Crispin2013-07-251-0/+36
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37536 3c298f89-4303-0410-b956-a3cf2f4a3e73
* base-files: be verbose when entering failsafe due to a button being pressedJohn Crispin2013-07-252-2/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37535 3c298f89-4303-0410-b956-a3cf2f4a3e73
* xburst: Add missing kernel config symbolLars-Peter Clausen2013-07-251-0/+1
| | | | | | | Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37534 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: disable hg255dJohn Crispin2013-07-251-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37532 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramipe: disable HG255D supportJohn Crispin2013-07-251-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37531 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: important patch for HG255DJohn Crispin2013-07-252-2/+8
| | | | | | | | | | r37505 add support for Huawei HG255D, but it only tested under a community hacked u-boot ("lintel u-boot"), which has a different mtd layout compared to origin one. If you install it on a box with origin u-boot, the origin factory part will be destroyed, and your wifi interface will never up!!! This patch shrink firmware part in mtd layout to exclude origin factory part, and I will prepare another patch to fix the eeprom extract issue for box with origin u-boot. Signed-off-by: Leon Xu <ylxu72@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37530 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ubox: update to git headJo-Philipp Wich2013-07-241-2/+2
| | | | | | | - use dynamically sized buffer, fixes label extraction on vfat partitions with huge cluster size - strip trailing spaces from vfat labels, aligns behaviour with "blkid" git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37529 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ustream-ssl: update to latest version, add a package for the polarssl build ↵Felix Fietkau2013-07-241-2/+14
| | | | | | | | variant Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37528 3c298f89-4303-0410-b956-a3cf2f4a3e73
* polarssl: update to version 1.2.8Felix Fietkau2013-07-244-55/+16
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37527 3c298f89-4303-0410-b956-a3cf2f4a3e73
* libubox: update to latest version, includes a small uloop fixFelix Fietkau2013-07-241-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37526 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uClibc: build with debug symbols by default (without changing other compile ↵Felix Fietkau2013-07-241-1/+1
| | | | | | | | related flags) Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37525 3c298f89-4303-0410-b956-a3cf2f4a3e73
* openssl: enable elliptic curve crypto by default (so that it can be used by ↵Felix Fietkau2013-07-241-0/+1
| | | | | | | | things like ipsec as well) Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37524 3c298f89-4303-0410-b956-a3cf2f4a3e73
* openssl: add elliptic curve crypto compilation options to opensslFelix Fietkau2013-07-242-3/+21
| | | | | | | | | | | This patch adds EC compilation options to openssl OPENSSL_WITH_EC is needed for authsae (OPENSSL_WITH_EC2M isn't) Activating ec (but not ec2m) in openssl take 35Ko more on ar71xx (ipk size) Activating both take 52Ko. Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37523 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ubox: update to git headJo-Philipp Wich2013-07-241-2/+2
| | | | | | - fixes vfat partition detection on big endian systems git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37522 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Basic support for the AsiaRF RT5350 based AWM002 module and ↵John Crispin2013-07-2412-0/+231
| | | | | | | | | | | evaluation board. Basic support for the AsiaRF RT5350 based AWM002 module and evaluation board. http://www.asiarf.com/Smallest-Tiny-Ralink-802-11n-Wireless-AP-Router-Module-Board-AWM002-product-view-375.html Signed-off-by Jon Smirl <jonsmirl@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37521 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: ebtables depends on bridgeJonas Gorski2013-07-231-1/+1
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37520 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: fix remaining initramfs related breakageFelix Fietkau2013-07-231-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37518 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix HG255D VLAN initial detect issueJohn Crispin2013-07-231-0/+1
| | | | | | Signed-off-by: Leon Xu <ylxu72@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37517 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 10:36:41 +0000