aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ramips: enable mt76 on mt7688 by defaultFelix Fietkau2016-03-022-0/+4
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48886 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mt76: update to the latest version, adds basic mt7628 supportFelix Fietkau2016-03-021-2/+6
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48885 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: add a number of pending fixesFelix Fietkau2016-03-025-0/+180
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48883 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: refresh patchFelix Fietkau2016-03-021-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48882 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: ath9k: enable access to GPIOFelix Fietkau2016-03-021-0/+243
| | | | | | | | | | Enable access to GPIO chip and its pins for Atheros AR92xx wireless devices. For now AR9285 and AR9287 are supported. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> Acked-by: Hartmut Knaack <knaack.h@gmx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48881 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: ath9k: set default state for platform LEDsFelix Fietkau2016-03-021-0/+29
| | | | | | | | | | Support default state for platform LEDs connected to ath9k device. Now LEDs are correctly set on or off at ath9k module initialization. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> Acked-by: Hartmut Knaack <knaack.h@gmx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48880 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: ath9k: enable platform WLAN LED nameFelix Fietkau2016-03-024-0/+64
| | | | | | | | | Enable platform-supplied WLAN LED name for ath9k device. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> Acked-by: Hartmut Knaack <knaack.h@gmx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48879 3c298f89-4303-0410-b956-a3cf2f4a3e73
* cyassl: disable Intel ASM for nowJo-Philipp Wich2016-03-021-8/+8
| | | | | | | | With ASM support enabled, CyaSSL fails to build on all x86 subtargets. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48876 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update kernel 3.18 to version 3.18.27Hauke Mehrtens2016-03-016-7/+7
| | | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48874 3c298f89-4303-0410-b956-a3cf2f4a3e73
* openssl: update to 1.0.2g (8 CVEs)Jo-Philipp Wich2016-03-014-15/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CVE-2016-0704 s2_srvr.c overwrite the wrong bytes in the master-key when applying Bleichenbacher protection for export cipher suites. This provides a Bleichenbacher oracle, and could potentially allow more efficient variants of the DROWN attack. CVE-2016-0703 s2_srvr.c did not enforce that clear-key-length is 0 for non-export ciphers. If clear-key bytes are present for these ciphers, they *displace* encrypted-key bytes. This leads to an efficient divide-and-conquer key recovery attack: if an eavesdropper has intercepted an SSLv2 handshake, they can use the server as an oracle to determine the SSLv2 master-key, using only 16 connections to the server and negligible computation. More importantly, this leads to a more efficient version of DROWN that is effective against non-export ciphersuites, and requires no significant computation. CVE-2016-0702 A side-channel attack was found which makes use of cache-bank conflicts on the Intel Sandy-Bridge microarchitecture which could lead to the recovery of RSA keys. The ability to exploit this issue is limited as it relies on an attacker who has control of code in a thread running on the same hyper- threaded core as the victim thread which is performing decryptions. CVE-2016-0799 The internal |fmtstr| function used in processing a "%s" format string in the BIO_*printf functions could overflow while calculating the length of a string and cause an OOB read when printing very long strings. Additionally the internal |doapr_outch| function can attempt to write to an OOB memory location (at an offset from the NULL pointer) in the event of a memory allocation failure. In 1.0.2 and below this could be caused where the size of a buffer to be allocated is greater than INT_MAX. E.g. this could be in processing a very long "%s" format string. Memory leaks can also occur. The first issue may mask the second issue dependent on compiler behaviour. These problems could enable attacks where large amounts of untrusted data is passed to the BIO_*printf functions. If applications use these functions in this way then they could be vulnerable. OpenSSL itself uses these functions when printing out human-readable dumps of ASN.1 data. Therefore applications that print this data could be vulnerable if the data is from untrusted sources. OpenSSL command line applications could also be vulnerable where they print out ASN.1 data, or if untrusted data is passed as command line arguments. Libssl is not considered directly vulnerable. Additionally certificates etc received via remote connections via libssl are also unlikely to be able to trigger these issues because of message size limits enforced within libssl. CVE-2016-0797 In the BN_hex2bn function the number of hex digits is calculated using an int value |i|. Later |bn_expand| is called with a value of |i * 4|. For large values of |i| this can result in |bn_expand| not allocating any memory because |i * 4| is negative. This can leave the internal BIGNUM data field as NULL leading to a subsequent NULL ptr deref. For very large values of |i|, the calculation |i * 4| could be a positive value smaller than |i|. In this case memory is allocated to the internal BIGNUM data field, but it is insufficiently sized leading to heap corruption. A similar issue exists in BN_dec2bn. This could have security consequences if BN_hex2bn/BN_dec2bn is ever called by user applications with very large untrusted hex/dec data. This is anticipated to be a rare occurrence. All OpenSSL internal usage of these functions use data that is not expected to be untrusted, e.g. config file data or application command line arguments. If user developed applications generate config file data based on untrusted data then it is possible that this could also lead to security consequences. This is also anticipated to be rare. CVE-2016-0798 The SRP user database lookup method SRP_VBASE_get_by_user had confusing memory management semantics; the returned pointer was sometimes newly allocated, and sometimes owned by the callee. The calling code has no way of distinguishing these two cases. Specifically, SRP servers that configure a secret seed to hide valid login information are vulnerable to a memory leak: an attacker connecting with an invalid username can cause a memory leak of around 300 bytes per connection. Servers that do not configure SRP, or configure SRP but do not configure a seed are not vulnerable. In Apache, the seed directive is known as SSLSRPUnknownUserSeed. To mitigate the memory leak, the seed handling in SRP_VBASE_get_by_user is now disabled even if the user has configured a seed. Applications are advised to migrate to SRP_VBASE_get1_by_user. However, note that OpenSSL makes no strong guarantees about the indistinguishability of valid and invalid logins. In particular, computations are currently not carried out in constant time. CVE-2016-0705 A double free bug was discovered when OpenSSL parses malformed DSA private keys and could lead to a DoS attack or memory corruption for applications that receive DSA private keys from untrusted sources. This scenario is considered rare. CVE-2016-0800 A cross-protocol attack was discovered that could lead to decryption of TLS sessions by using a server supporting SSLv2 and EXPORT cipher suites as a Bleichenbacher RSA padding oracle. Note that traffic between clients and non- vulnerable servers can be decrypted provided another server supporting SSLv2 and EXPORT ciphers (even with a different protocol such as SMTP, IMAP or POP) shares the RSA keys of the non-vulnerable server. This vulnerability is known as DROWN (CVE-2016-0800). Recovering one session key requires the attacker to perform approximately 2^50 computation, as well as thousands of connections to the affected server. A more efficient variant of the DROWN attack exists against unpatched OpenSSL servers using versions that predate 1.0.2a, 1.0.1m, 1.0.0r and 0.9.8zf released on 19/Mar/2015 (see CVE-2016-0703 below). Users can avoid this issue by disabling the SSLv2 protocol in all their SSL/TLS servers, if they've not done so already. Disabling all SSLv2 ciphers is also sufficient, provided the patches for CVE-2015-3197 (fixed in OpenSSL 1.0.1r and 1.0.2f) have been deployed. Servers that have not disabled the SSLv2 protocol, and are not patched for CVE-2015-3197 are vulnerable to DROWN even if all SSLv2 ciphers are nominally disabled, because malicious clients can force the use of SSLv2 with EXPORT ciphers. OpenSSL 1.0.2g and 1.0.1s deploy the following mitigation against DROWN: SSLv2 is now by default disabled at build-time. Builds that are not configured with "enable-ssl2" will not support SSLv2. Even if "enable-ssl2" is used, users who want to negotiate SSLv2 via the version-flexible SSLv23_method() will need to explicitly call either of: SSL_CTX_clear_options(ctx, SSL_OP_NO_SSLv2); or SSL_clear_options(ssl, SSL_OP_NO_SSLv2); as appropriate. Even if either of those is used, or the application explicitly uses the version-specific SSLv2_method() or its client or server variants, SSLv2 ciphers vulnerable to exhaustive search key recovery have been removed. Specifically, the SSLv2 40-bit EXPORT ciphers, and SSLv2 56-bit DES are no longer available. In addition, weak ciphers in SSLv3 and up are now disabled in default builds of OpenSSL. Builds that are not configured with "enable-weak-ssl-ciphers" will not provide any "EXPORT" or "LOW" strength ciphers. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48868 3c298f89-4303-0410-b956-a3cf2f4a3e73
* opkg: Make opkg understand old md5John Crispin2016-03-012-21/+69
| | | | | | | | | | Opkg now uses sha256 by default and expects them. Making it optionally understand md5s also and detect md5 sum so we can migrate from configuration that used md5. Signed-off-by: Michal Hrusecky <Michal.Hrusecky@nic.cz> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48867 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add OOLITE to the Gainstrong profile, removed standalone profile.John Crispin2016-03-012-18/+11
| | | | | | | | | This patch moves the OOLITE profile code into the overarching Gainstrong profile and deletes the old single profile file. Signed-off by: Stijn Segers <francesco.borromini@inventati.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48866 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Added support for ZBT-826 / ZBT-1026John Crispin2016-03-017-0/+155
| | | | | | | | | Support for these MT7620-based routers: https://wiki.openwrt.org/toh/zbt/we-826 Based on Oskari’s patches found here: https://dev.openwrt.org/ticket/19996 Signed-off-by: Jamie Stuart <jamie@onebillion.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48865 3c298f89-4303-0410-b956-a3cf2f4a3e73
* buildroot: improve git submodule handling for packagesFelix Fietkau2016-02-292-4/+5
| | | | | | | | | | | | | | | | | | | Move the `--recursive` switch from `git clone` to `git submodule` so that submodules are cloned for upstream branches where the PKG_SOURCE_VERSION commit-ish has a different .gitmodules configuration than the repository default. This is, for example, required when the master branch for a source package does not use submodules, but its topic branch for OpenWRT does. This changes the buildroot dependency from git-1.6.2 to git 1.7.12.2, which was released September 2012. Signed-off-by: Darik Horn <dajhorn@vanadac.com> Signed-off-by: Karl Palsson <karlp@tweak.net.au> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48830 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils: mkfwimage: fix firmware_max_length for XM layoutFelix Fietkau2016-02-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new u-boot version bundled with the 5.6.x firmwares from Ubiquiti gets confused by the smaller rootfs partition size; this can lead to various issues: 1. We've gotten reports that flashing from the 5.6.x stock firmware to OpenWrt will brick devices; I wasn't able to reproduce this myself 2. Flashing from 5.5.x stock firmware to OpenWrt and back to stock (via TFTP recovery), following by an update to 5.6.x via web interface can yield a bricked device with the following properties: - It can't be booted without entering commands over a serial console, as u-boot supplies the wrong MTD layout - The web interface won't accept any image with the original flash layout, so stock firmware upgrades are impossible - As the TFTP recovery doesn't update u-boot, returning to the old u-boot from firmware 5.5.x is impossible To recover from 2., creating an OpenWrt image which doesn't set u-boot as read-only and flashing a backup of the old u-boot from there is the only way known to me. (Fixing the mtdparts variable in u-boot-env from OpenWrt might also work; settings this from u-boot over serial didn't have any permanent effect.) Fix all of this by setting the correct flash layout also used by the stock firmware. Flashing has been tested from both firmware 5.5.x and 5.6.x. The fixed layout also matches the mtdparts defined by OpenWrt. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48829 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx, firmware-utils: split ubdev01 flash layout from XMFelix Fietkau2016-02-292-1/+7
| | | | | | | | | The ubdev01 profile defines its own MTDPARTS with smaller firmware partition, so give it its own UBNT_BOARD in mkfwimage. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48828 3c298f89-4303-0410-b956-a3cf2f4a3e73
* firmware-utils: mkfwimage: add -Wall, fix obvious bugs causing compile warningsFelix Fietkau2016-02-292-8/+6
| | | | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48827 3c298f89-4303-0410-b956-a3cf2f4a3e73
* gcc: update gcc 5 to version 5.3.0Felix Fietkau2016-02-2939-65/+30
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48826 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mt76: update to the latest version, adds a number of stability fixesFelix Fietkau2016-02-281-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48814 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add sysupgrade support for mt7628Felix Fietkau2016-02-281-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48813 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: create device tree node for MT7628 WMAC in preparation for future ↵Felix Fietkau2016-02-282-0/+17
| | | | | | | | work on driver support in mt76 Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48812 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mt76: update to the latest version, enable MT7603 support (very basic, needs ↵Felix Fietkau2016-02-281-5/+8
| | | | | | | | testing and debugging work) Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48811 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bsdiff: add bsdiff and bspatch tool packageHauke Mehrtens2016-02-272-0/+162
| | | | | | | | | | This will be used to create a diff between the Lantiq annex A and the annex B firmware. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48810 3c298f89-4303-0410-b956-a3cf2f4a3e73
* scripts/download.pl: fix sha256 hash command (#21931)Felix Fietkau2016-02-271-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48809 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Revert "ar71xx: WNR612v2: exclude USB modules from image"Felix Fietkau2016-02-261-1/+0
| | | | | | | | This reverts commit r48778. The issue has now been fixed properly Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48808 3c298f89-4303-0410-b956-a3cf2f4a3e73
* include/target.mk: fix profile defaultsFelix Fietkau2016-02-261-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48807 3c298f89-4303-0410-b956-a3cf2f4a3e73
* base-files: support passing mode to ucidef_set_led_netdev()Jo-Philipp Wich2016-02-263-4/+6
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48806 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: use upstream accepted bcm47xxpart patchesRafał Miłecki2016-02-262-3/+6
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48805 3c298f89-4303-0410-b956-a3cf2f4a3e73
* toolchain: use musl instead of glibc by default for mips64Felix Fietkau2016-02-261-4/+3
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48804 3c298f89-4303-0410-b956-a3cf2f4a3e73
* musl: add mips64 portFelix Fietkau2016-02-261-0/+2714
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48803 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: disable MIPS VDSO by default until the cache issues have been resolvedFelix Fietkau2016-02-261-0/+21
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48802 3c298f89-4303-0410-b956-a3cf2f4a3e73
* dnsmasq: add host-specific lease time option for static hostsJohn Crispin2016-02-262-3/+5
| | | | | | | | | | | | | | | | | | | | | | | Enable setting a host-specific lease time for static hosts. The new option is called "leasetime" and the format is similar as for the default lease time: e.g. 12h, 3d, infinite Default lease time is used for all hosts for which there is no host-specific definition. The option is added to /etc/config/dhcp for the selected hosts: config host option name 'Nexus' option mac 'd8:50:66:55:59:7c' option ip '192.168.1.245' option leasetime '2h' It gets appended to /var/etc/dnsmasq.conf like this: dhcp-host=d8:50:66:55:59:7c,192.168.1.245,Nexus,2h Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48801 3c298f89-4303-0410-b956-a3cf2f4a3e73
* dnsmasq: add dhcp relay optionJohn Crispin2016-02-261-0/+19
| | | | | | Signed-off-by: dbugnar <dnbugnar@ocedo.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48800 3c298f89-4303-0410-b956-a3cf2f4a3e73
* procd: hotplug.json: allow passing hotplug events from all subsystemsJohn Crispin2016-02-261-12/+6
| | | | | | | | | | | There are time that programs need to be notified of events from subsystems that are not enumerated in the .json definition, e.g. QEMU guest agent by default requires /dev/virtio-ports/org.qemu.guest_agent.0 which is a symlink to /dev/vportMpN from virtio-ports subsystem. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48799 3c298f89-4303-0410-b956-a3cf2f4a3e73
* libubox: update to latest git HEADJohn Crispin2016-02-261-2/+2
| | | | | | | | adds isdir support to json_script Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48798 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Renamed Gainstrong MiniBox profile to Gainstrong (manufacturer) and ↵John Crispin2016-02-261-1/+1
| | | | | | | | | | | | | | | | updated copyright This is the first patch of a series of three to tidy up the profiles for Gainstrong devices. Right now there are two Gainstrong profiles, each for a single device built by this manufacturer. This patch renames the MiniBox profile to Gainstrong and updates the copyright notice. The series applies cleanly to current trunk. Resent with the architecture in the subject, forgot that the first time. Signed-off by: Stijn Segers <francesco.borromini@inventati.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48797 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix GPIO names for RT5350F-OLinuXino-EVBJohn Crispin2016-02-261-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hi, the board in subject (RT5350F-OLinuXino-EVB) still ships from vendor with a RC3 image built upon a .dts file which declares GPIO12 and GPIO14 as relay2 and relay1 respectively, as you can see from their rt5350f branch on GitHub. For some reason in the official stable build both the GPIOs are swapped and the wrong names are declared in the gpio-export directive. I'm submitting this patch which should roll back the wrong changes, so that we get backward compatibility with any script developed on RC3 which controls the relays. After patching correct operation is restored: root@OpenWrt:/# cat /sys/kernel/debug/gpio GPIOs 0-21, platform/10000600.gpio, 10000600.gpio: gpio-0 (button ) in hi gpio-12 (relay2 ) out lo gpio-14 (relay1 ) out lo Thank you, Signed-off-by: Lorenzo Cafaro <lorenzo@ibisco.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48796 3c298f89-4303-0410-b956-a3cf2f4a3e73
* hotplug-preinit: remove superfluous `and`John Crispin2016-02-261-3/+1
| | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48795 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mpc85xx/tl-wdr4900: correct address of the gpio controllerJohn Crispin2016-02-261-1/+1
| | | | | | | | since linux 3.19 the address of the gpio-controller changed Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48794 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel/gpio_keys: load module on pre-initJohn Crispin2016-02-261-1/+1
| | | | | | | | fix rescue mode on wdr4900 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48793 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: deactivate the vdso gettimeofday function.Hauke Mehrtens2016-02-251-0/+9
| | | | | | | | | | | The vdso version of this function has some problems with the cache. Very often it works on dated data which causes problem. We are currently working on fixing this in upstream Linux kernel. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48787 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux-atm: activate format security checksHauke Mehrtens2016-02-253-14/+20
| | | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48786 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ltq-vdsl-mei: activate format security checksHauke Mehrtens2016-02-252-1/+11
| | | | | | | | | | This activates the format warnings in this package and that makes it possible to activate format-security checks. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48785 3c298f89-4303-0410-b956-a3cf2f4a3e73
* strace: update to version 4.11Hauke Mehrtens2016-02-252-55/+2
| | | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48784 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update kernel 4.4 to version 4.4.3Hauke Mehrtens2016-02-2530-316/+85
| | | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48783 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: backport brcmfmac fix for primary channel in 80 MHz modeRafał Miłecki2016-02-252-1/+65
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48782 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: backport brcmfmac fix for sdio sg table alloc crashRafał Miłecki2016-02-252-0/+118
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48781 3c298f89-4303-0410-b956-a3cf2f4a3e73
* toolchain/glibc: remove obsolete versionsFelix Fietkau2016-02-2518-1404/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48780 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: WNR612v2: fix for random WLAN MACFelix Fietkau2016-02-251-1/+7
| | | | | | | | | | Fix for invalid/random WLAN MAC address in WNR612v2. Permanent platform MAC is calculated and assigned during system startup. WLAN MAC follows wired Ethernet interface addresses. This is the same fix as for WNR2000v3. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48779 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: WNR612v2: exclude USB modules from imageFelix Fietkau2016-02-251-0/+1
| | | | | | | | | Netgear WNR612v2 has no USB port yet default system image includes USB kernel modules. This patch fixes that. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48778 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-07 00:38:10 +0000