diff options
Diffstat (limited to 'target/linux')
| -rw-r--r-- | target/linux/brcm47xx/config-3.10 | 4 | ||||
| -rw-r--r-- | target/linux/brcm47xx/patches-3.10/080-MIPS-Add-8250-16550-serial-early-printk-driver.patch | 124 | ||||
| -rw-r--r-- | target/linux/brcm47xx/patches-3.10/081-MIPS-BCM47XX-Remove-CFE-support.patch (renamed from target/linux/brcm47xx/patches-3.10/116-MIPS-BCM47xx-Remove-CFE-console.patch) | 88 | ||||
| -rw-r--r-- | target/linux/brcm47xx/patches-3.10/082-MIPS-BCM47XX-add-EARLY_PRINTK_8250-support.patch | 53 | ||||
| -rw-r--r-- | target/linux/brcm47xx/patches-3.10/114-MIPS-BCM47xx-Setup-and-register-serial-early.patch | 69 | ||||
| -rw-r--r-- | target/linux/brcm47xx/patches-3.10/830-huawei_e970_support.patch | 10 | ||||
| -rw-r--r-- | target/linux/brcm47xx/patches-3.10/980-wnr834b_no_cardbus_invariant.patch | 2 |
7 files changed, 234 insertions, 116 deletions
diff --git a/target/linux/brcm47xx/config-3.10 b/target/linux/brcm47xx/config-3.10 index 7518bb80d0..da786412d3 100644 --- a/target/linux/brcm47xx/config-3.10 +++ b/target/linux/brcm47xx/config-3.10 @@ -48,7 +48,8 @@ CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y -CONFIG_FW_CFE=y +CONFIG_EARLY_PRINTK=y +CONFIG_EARLY_PRINTK_8250=y CONFIG_GENERIC_ATOMIC64=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -148,6 +149,7 @@ CONFIG_SSB_SPROM=y CONFIG_SWCONFIG=y CONFIG_SYS_HAS_CPU_MIPS32_R1=y CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_SYS_HAS_EARLY_PRINTK=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_SYS_SUPPORTS_ARBIT_HZ=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y diff --git a/target/linux/brcm47xx/patches-3.10/080-MIPS-Add-8250-16550-serial-early-printk-driver.patch b/target/linux/brcm47xx/patches-3.10/080-MIPS-Add-8250-16550-serial-early-printk-driver.patch new file mode 100644 index 0000000000..bfbe43be5b --- /dev/null +++ b/target/linux/brcm47xx/patches-3.10/080-MIPS-Add-8250-16550-serial-early-printk-driver.patch @@ -0,0 +1,124 @@ +commit 0a76092a63809a0e72e3e9552acadf42869c0293 +Author: Yoichi Yuasa <yuasa@linux-mips.org> +Date: Mon Feb 8 20:59:39 2010 +0900 + + MIPS: Add 8250/16550 serial early printk driver + + Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> + Cc: linux-mips <linux-mips@linux-mips.org> + Patchwork: https://patchwork.linux-mips.org/patch/947/ + Signed-off-by: Ralf Baechle <ralf@linux-mips.org> + +--- a/arch/mips/Kconfig.debug ++++ b/arch/mips/Kconfig.debug +@@ -20,6 +20,14 @@ config EARLY_PRINTK + doesn't cooperate with an X server. You should normally say N here, + unless you want to debug such a crash. + ++config EARLY_PRINTK_8250 ++ bool "8250/16550 and compatible serial early printk driver" ++ depends on EARLY_PRINTK ++ default n ++ help ++ If you say Y here, it will be possible to use a 8250/16550 serial ++ port as the boot console. ++ + config CMDLINE_BOOL + bool "Built-in kernel command line" + default n +--- a/arch/mips/include/asm/setup.h ++++ b/arch/mips/include/asm/setup.h +@@ -5,6 +5,14 @@ + + extern void setup_early_printk(void); + ++#ifdef CONFIG_EARLY_PRINTK_8250 ++extern void setup_8250_early_printk_port(unsigned long base, ++ unsigned int reg_shift, unsigned int timeout); ++#else ++static inline void setup_8250_early_printk_port(unsigned long base, ++ unsigned int reg_shift, unsigned int timeout) {} ++#endif ++ + extern void set_handler(unsigned long offset, void *addr, unsigned long len); + extern void set_uncached_handler(unsigned long offset, void *addr, unsigned long len); + +--- a/arch/mips/kernel/Makefile ++++ b/arch/mips/kernel/Makefile +@@ -84,6 +84,7 @@ obj-$(CONFIG_GPIO_TXX9) += gpio_txx9.o + obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o + obj-$(CONFIG_CRASH_DUMP) += crash_dump.o + obj-$(CONFIG_EARLY_PRINTK) += early_printk.o ++obj-$(CONFIG_EARLY_PRINTK_8250) += early_printk_8250.o + obj-$(CONFIG_SPINLOCK_TEST) += spinlock_test.o + obj-$(CONFIG_MIPS_MACHINE) += mips_machine.o + +--- /dev/null ++++ b/arch/mips/kernel/early_printk_8250.c +@@ -0,0 +1,66 @@ ++/* ++ * 8250/16550-type serial ports prom_putchar() ++ * ++ * Copyright (C) 2010 Yoichi Yuasa <yuasa@linux-mips.org> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ++ */ ++#include <linux/io.h> ++#include <linux/serial_core.h> ++#include <linux/serial_reg.h> ++ ++static void __iomem *serial8250_base; ++static unsigned int serial8250_reg_shift; ++static unsigned int serial8250_tx_timeout; ++ ++void setup_8250_early_printk_port(unsigned long base, unsigned int reg_shift, ++ unsigned int timeout) ++{ ++ serial8250_base = (void __iomem *)base; ++ serial8250_reg_shift = reg_shift; ++ serial8250_tx_timeout = timeout; ++} ++ ++static inline u8 serial_in(int offset) ++{ ++ return readb(serial8250_base + (offset << serial8250_reg_shift)); ++} ++ ++static inline void serial_out(int offset, char value) ++{ ++ writeb(value, serial8250_base + (offset << serial8250_reg_shift)); ++} ++ ++void prom_putchar(char c) ++{ ++ unsigned int timeout; ++ int status, bits; ++ ++ if (!serial8250_base) ++ return; ++ ++ timeout = serial8250_tx_timeout; ++ bits = UART_LSR_TEMT | UART_LSR_THRE; ++ ++ do { ++ status = serial_in(UART_LSR); ++ ++ if (--timeout == 0) ++ break; ++ } while ((status & bits) != bits); ++ ++ if (timeout) ++ serial_out(UART_TX, c); ++} diff --git a/target/linux/brcm47xx/patches-3.10/116-MIPS-BCM47xx-Remove-CFE-console.patch b/target/linux/brcm47xx/patches-3.10/081-MIPS-BCM47XX-Remove-CFE-support.patch index ecccd82566..1537db5158 100644 --- a/target/linux/brcm47xx/patches-3.10/116-MIPS-BCM47xx-Remove-CFE-console.patch +++ b/target/linux/brcm47xx/patches-3.10/081-MIPS-BCM47XX-Remove-CFE-support.patch @@ -1,22 +1,30 @@ -From 5219981646071abb6731634bf47781a53e248764 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Sun, 18 Jul 2010 15:11:26 +0200 -Subject: [PATCH 6/6] MIPS: BCM47xx: Remove CFE console +commit 808fe9c2fa81a6b3e20fe813d5410e7fd6606efa +Author: Hauke Mehrtens <hauke@hauke-m.de> +Date: Sun Jul 18 15:11:26 2010 +0200 -Do not use the CFE console. It causes hangs on some devices like the -Buffalo WHR-HP-G54. -This was reported in https://dev.openwrt.org/ticket/4061 and -https://forum.openwrt.org/viewtopic.php?id=17063 - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - arch/mips/Kconfig | 1 - - arch/mips/bcm47xx/prom.c | 82 +++------------------------------------------ - 2 files changed, 6 insertions(+), 77 deletions(-) + MIPS: BCM47XX: Remove CFE support + + bcm47xx only uses the CFE code for early print to a console, but that + is also possible with a early print serial 8250 driver. + + The CFE api init causes hangs somewhere in prom_init_cfe() on some + devices like the Buffalo WHR-HP-G54 and the Asus WL-520GU. + This was reported in https://dev.openwrt.org/ticket/4061 and + https://forum.openwrt.org/viewtopic.php?id=17063 + + This will remove all the CFE handling code from bcm47xx. + + Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig -@@ -118,7 +118,6 @@ config BCM47XX +@@ -112,13 +112,11 @@ config BCM47XX + select CEVT_R4K + select CSRC_R4K + select DMA_NONCOHERENT +- select FW_CFE + select HW_HAS_PCI + select IRQ_CPU select NO_EXCEPT_FILL select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN @@ -26,16 +34,20 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> --- a/arch/mips/bcm47xx/prom.c +++ b/arch/mips/bcm47xx/prom.c -@@ -35,8 +35,6 @@ +@@ -30,12 +30,9 @@ + #include <linux/spinlock.h> + #include <linux/smp.h> + #include <asm/bootinfo.h> +-#include <asm/fw/cfe/cfe_api.h> +-#include <asm/fw/cfe/cfe_error.h> #include <bcm47xx.h> #include <bcm47xx_board.h> -static int cfe_cons_handle; -- + static char bcm47xx_system_type[20] = "Broadcom BCM47XX"; - const char *get_system_type(void) -@@ -52,89 +50,23 @@ __init void bcm47xx_set_system_type(u16 +@@ -52,91 +49,6 @@ __init void bcm47xx_set_system_type(u16 chip_id); } @@ -46,11 +58,10 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> -} - -static __init void prom_init_cfe(void) -+static __init int prom_init_cfe(void) - { - uint32_t cfe_ept; - uint32_t cfe_handle; - uint32_t cfe_eptseal; +-{ +- uint32_t cfe_ept; +- uint32_t cfe_handle; +- uint32_t cfe_eptseal; - int argc = fw_arg0; - char **envp = (char **) fw_arg2; - int *prom_vec = (int *) fw_arg3; @@ -84,19 +95,14 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> - cfe_eptseal = prom_vec[3]; - } - } -+ -+ cfe_eptseal = (uint32_t) fw_arg3; -+ cfe_handle = (uint32_t) fw_arg0; -+ cfe_ept = (uint32_t) fw_arg2; - - if (cfe_eptseal != CFE_EPTSEAL) { +- +- if (cfe_eptseal != CFE_EPTSEAL) { - /* too early for panic to do any good */ - printk(KERN_ERR "CFE's entrypoint seal doesn't match."); +- printk(KERN_ERR "CFE's entrypoint seal doesn't match."); - while (1) ; -+ return -1; - } - - cfe_init(cfe_handle, cfe_ept); +- } +- +- cfe_init(cfe_handle, cfe_ept); -} - -static __init void prom_init_console(void) @@ -128,14 +134,16 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> - snprintf(arcs_cmdline, COMMAND_LINE_SIZE, "%s console=ttyS%c,115200", - arcs_cmdline, buf[4]); - } -+ return 0; - } - +-} +- static __init void prom_init_mem(void) -@@ -185,8 +117,6 @@ static __init void prom_init_mem(void) + { + unsigned long mem; +@@ -184,9 +96,6 @@ static __init void prom_init_mem(void) + void __init prom_init(void) { - prom_init_cfe(); +- prom_init_cfe(); - prom_init_console(); - prom_init_cmdline(); prom_init_mem(); diff --git a/target/linux/brcm47xx/patches-3.10/082-MIPS-BCM47XX-add-EARLY_PRINTK_8250-support.patch b/target/linux/brcm47xx/patches-3.10/082-MIPS-BCM47XX-add-EARLY_PRINTK_8250-support.patch new file mode 100644 index 0000000000..744e35985e --- /dev/null +++ b/target/linux/brcm47xx/patches-3.10/082-MIPS-BCM47XX-add-EARLY_PRINTK_8250-support.patch @@ -0,0 +1,53 @@ +commit 22250a38f970c173acb1b3fb30e6dce1430f697b +Author: Hauke Mehrtens <hauke@hauke-m.de> +Date: Thu Sep 19 22:48:35 2013 +0200 + + MIPS: BCM47XX: add EARLY_PRINTK_8250 support + + The BCM47xx SoCs have a 8250 serial compatible console at address + 0x18000300 and an other at 0x18000400. On most devices 0x18000300 is + wired to some pins on the board, we should use that. + This is the smae for the AI (bcma) and the SB (ssb) bus, this is some + offset on the chip common core. + + Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> + +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -117,6 +117,8 @@ config BCM47XX + select NO_EXCEPT_FILL + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN ++ select SYS_HAS_EARLY_PRINTK ++ select EARLY_PRINTK_8250 if EARLY_PRINTK + help + Support for BCM47XX based boards + +--- a/arch/mips/bcm47xx/prom.c ++++ b/arch/mips/bcm47xx/prom.c +@@ -28,6 +28,8 @@ + #include <linux/types.h> + #include <linux/kernel.h> + #include <linux/spinlock.h> ++#include <linux/ssb/ssb_driver_chipcommon.h> ++#include <linux/ssb/ssb_regs.h> + #include <linux/smp.h> + #include <asm/bootinfo.h> + #include <bcm47xx.h> +@@ -94,9 +96,16 @@ static __init void prom_init_mem(void) + add_memory_region(0, mem, BOOT_MEM_RAM); + } + ++/* ++ * This is the first serial on the chip common core, it is at this position ++ * for sb (ssb) and ai (bcma) bus. ++ */ ++#define BCM47XX_SERIAL_ADDR (SSB_ENUM_BASE + SSB_CHIPCO_UART0_DATA) ++ + void __init prom_init(void) + { + prom_init_mem(); ++ setup_8250_early_printk_port(CKSEG1ADDR(BCM47XX_SERIAL_ADDR), 0, 0); + } + + void __init prom_free_prom_memory(void) diff --git a/target/linux/brcm47xx/patches-3.10/114-MIPS-BCM47xx-Setup-and-register-serial-early.patch b/target/linux/brcm47xx/patches-3.10/114-MIPS-BCM47xx-Setup-and-register-serial-early.patch deleted file mode 100644 index 3972458a95..0000000000 --- a/target/linux/brcm47xx/patches-3.10/114-MIPS-BCM47xx-Setup-and-register-serial-early.patch +++ /dev/null @@ -1,69 +0,0 @@ -From 9be402f069cc259ad5795b77567d66c4e7f6bef6 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Sun, 18 Jul 2010 14:59:24 +0200 -Subject: [PATCH 4/6] MIPS: BCM47xx: Setup and register serial early - -Swap the first and second serial if console=ttyS1 was set. -Set it up and register it for early serial support. - -This patch has been in OpenWRT for a long time. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - arch/mips/bcm47xx/setup.c | 39 ++++++++++++++++++++++++++++++++++++++- - 1 files changed, 38 insertions(+), 1 deletions(-) - ---- a/arch/mips/bcm47xx/setup.c -+++ b/arch/mips/bcm47xx/setup.c -@@ -31,6 +31,8 @@ - #include <linux/ssb/ssb.h> - #include <linux/ssb/ssb_embedded.h> - #include <linux/bcma/bcma_soc.h> -+#include <linux/serial.h> -+#include <linux/serial_8250.h> - #include <asm/bootinfo.h> - #include <asm/prom.h> - #include <asm/reboot.h> -@@ -123,6 +125,31 @@ static int bcm47xx_get_invariants(struct - return 0; - } - -+#ifdef CONFIG_SERIAL_8250 -+static void __init bcm47xx_early_serial_setup(struct ssb_mipscore *mcore) -+{ -+ int i; -+ -+ for (i = 0; i < mcore->nr_serial_ports; i++) { -+ struct ssb_serial_port *port = &(mcore->serial_ports[i]); -+ struct uart_port s; -+ -+ memset(&s, 0, sizeof(s)); -+ s.line = i; -+ s.mapbase = (unsigned int) port->regs; -+ s.membase = port->regs; -+ s.irq = port->irq + 2; -+ s.uartclk = port->baud_base; -+ s.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; -+ s.iotype = SERIAL_IO_MEM; -+ s.regshift = port->reg_shift; -+ -+ early_serial_setup(&s); -+ } -+ printk(KERN_DEBUG "Serial init done.\n"); -+} -+#endif -+ - static void __init bcm47xx_register_ssb(void) - { - int err; -@@ -152,6 +179,10 @@ static void __init bcm47xx_register_ssb( - memcpy(&mcore->serial_ports[1], &port, sizeof(port)); - } - } -+ -+#ifdef CONFIG_SERIAL_8250 -+ bcm47xx_early_serial_setup(mcore); -+#endif - } - #endif - diff --git a/target/linux/brcm47xx/patches-3.10/830-huawei_e970_support.patch b/target/linux/brcm47xx/patches-3.10/830-huawei_e970_support.patch index 5e8a2cb461..333b9e6c5b 100644 --- a/target/linux/brcm47xx/patches-3.10/830-huawei_e970_support.patch +++ b/target/linux/brcm47xx/patches-3.10/830-huawei_e970_support.patch @@ -1,14 +1,14 @@ --- a/arch/mips/bcm47xx/setup.c +++ b/arch/mips/bcm47xx/setup.c -@@ -33,6 +33,7 @@ +@@ -31,6 +31,7 @@ + #include <linux/ssb/ssb.h> + #include <linux/ssb/ssb_embedded.h> #include <linux/bcma/bcma_soc.h> - #include <linux/serial.h> - #include <linux/serial_8250.h> +#include <linux/gpio_wdt.h> #include <asm/bootinfo.h> #include <asm/prom.h> #include <asm/reboot.h> -@@ -260,6 +261,33 @@ void __init plat_mem_setup(void) +@@ -229,6 +230,33 @@ void __init plat_mem_setup(void) mips_set_machine_name(bcm47xx_board_get_name()); } @@ -42,7 +42,7 @@ static int __init bcm47xx_register_bus_complete(void) { switch (bcm47xx_bus_type) { -@@ -274,6 +302,8 @@ static int __init bcm47xx_register_bus_c +@@ -243,6 +271,8 @@ static int __init bcm47xx_register_bus_c break; #endif } diff --git a/target/linux/brcm47xx/patches-3.10/980-wnr834b_no_cardbus_invariant.patch b/target/linux/brcm47xx/patches-3.10/980-wnr834b_no_cardbus_invariant.patch index 55c7365fef..069a0fa7a2 100644 --- a/target/linux/brcm47xx/patches-3.10/980-wnr834b_no_cardbus_invariant.patch +++ b/target/linux/brcm47xx/patches-3.10/980-wnr834b_no_cardbus_invariant.patch @@ -1,6 +1,6 @@ --- a/arch/mips/bcm47xx/setup.c +++ b/arch/mips/bcm47xx/setup.c -@@ -123,6 +123,10 @@ static int bcm47xx_get_invariants(struct +@@ -121,6 +121,10 @@ static int bcm47xx_get_invariants(struct if (bcm47xx_nvram_getenv("cardbus", buf, sizeof(buf)) >= 0) iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10); |