aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/atheros-2.6/config16
-rw-r--r--target/linux/atheros-2.6/config-diff17
-rw-r--r--target/linux/atheros-2.6/files/arch/mips/atheros/Kconfig13
-rw-r--r--target/linux/atheros-2.6/files/arch/mips/atheros/Makefile22
-rw-r--r--target/linux/atheros-2.6/files/arch/mips/atheros/ar5312.c471
-rw-r--r--target/linux/atheros-2.6/files/arch/mips/atheros/ar5312.h223
-rw-r--r--target/linux/atheros-2.6/files/arch/mips/atheros/ar5315.c529
-rw-r--r--target/linux/atheros-2.6/files/arch/mips/atheros/ar5315.h678
-rw-r--r--target/linux/atheros-2.6/files/arch/mips/atheros/ar531x.h106
-rw-r--r--target/linux/atheros-2.6/files/arch/mips/atheros/board.c190
-rw-r--r--target/linux/atheros-2.6/files/arch/mips/atheros/irq.c98
-rw-r--r--target/linux/atheros-2.6/files/arch/mips/atheros/prom.c67
-rw-r--r--target/linux/atheros-2.6/files/drivers/mtd/devices/spiflash.c596
-rw-r--r--target/linux/atheros-2.6/files/drivers/mtd/devices/spiflash.h124
-rw-r--r--target/linux/atheros-2.6/files/drivers/net/ar2313/Makefile5
-rw-r--r--target/linux/atheros-2.6/files/drivers/net/ar2313/ar2313.c1545
-rw-r--r--target/linux/atheros-2.6/files/drivers/net/ar2313/ar2313.h191
-rw-r--r--target/linux/atheros-2.6/files/drivers/net/ar2313/ar2313_msg.h17
-rw-r--r--target/linux/atheros-2.6/files/drivers/net/ar2313/dma.h135
-rw-r--r--target/linux/atheros-2.6/files/drivers/net/ar2313/platform.h128
-rw-r--r--target/linux/atheros-2.6/files/include/asm-mips/mach-atheros/ar531x_platform.h26
-rw-r--r--target/linux/atheros-2.6/patches/100-board.patch1913
-rw-r--r--target/linux/atheros-2.6/patches/110-spiflash.patch737
-rw-r--r--target/linux/atheros-2.6/patches/120-enable_wireless_for_ahb.patch2
-rw-r--r--target/linux/atheros-2.6/patches/130-ar2313_ethernet.patch2047
25 files changed, 5210 insertions, 4686 deletions
diff --git a/target/linux/atheros-2.6/config b/target/linux/atheros-2.6/config
index 7bf0289a0a..52c4d7a23d 100644
--- a/target/linux/atheros-2.6/config
+++ b/target/linux/atheros-2.6/config
@@ -14,12 +14,8 @@ CONFIG_AIRO=m
CONFIG_AIRO_CS=m
# CONFIG_AMD8111_ETH is not set
# CONFIG_AMIGA_PARTITION is not set
-CONFIG_AP51=y
# CONFIG_APPLICOM is not set
CONFIG_AR2313=y
-CONFIG_AR5315=y
-CONFIG_AR531X=y
-CONFIG_AR531X_COBRA=y
CONFIG_ARCH_FLATMEM_ENABLE=y
# CONFIG_ARCNET is not set
CONFIG_ARPD=y
@@ -28,6 +24,9 @@ CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_ATALK is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_ATA_OVER_ETH is not set
+CONFIG_ATHEROS=y
+CONFIG_ATHEROS_AR5312=y
+CONFIG_ATHEROS_AR5315=y
# CONFIG_ATM is not set
CONFIG_ATMEL=m
# CONFIG_ATM_AMBASSADOR is not set
@@ -689,10 +688,10 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_OTP is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PHYSMAP_BANKWIDTH is not set
-# CONFIG_MTD_PHYSMAP_LEN is not set
-# CONFIG_MTD_PHYSMAP_START is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_START=0x0
# CONFIG_MTD_PLATRAM is not set
# CONFIG_MTD_RAM is not set
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3
@@ -878,7 +877,6 @@ CONFIG_PCCARD_NONSTATIC=m
CONFIG_PCI=y
CONFIG_PCI_ATMEL=m
CONFIG_PCI_HERMES=m
-# CONFIG_PCMCIA is not set
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_PCMCIA_FDOMAIN is not set
diff --git a/target/linux/atheros-2.6/config-diff b/target/linux/atheros-2.6/config-diff
index 30c500e847..064880a3bb 100644
--- a/target/linux/atheros-2.6/config-diff
+++ b/target/linux/atheros-2.6/config-diff
@@ -1,11 +1,10 @@
CONFIG_32BIT=y
# CONFIG_64BIT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_AP51=y
CONFIG_AR2313=y
-CONFIG_AR5315=y
-CONFIG_AR531X=y
-CONFIG_AR531X_COBRA=y
+CONFIG_ATHEROS=y
+CONFIG_ATHEROS_AR5312=y
+CONFIG_ATHEROS_AR5315=y
# CONFIG_ATM is not set
CONFIG_BASE_SMALL=0
# CONFIG_BT is not set
@@ -43,7 +42,6 @@ CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_DMA_NONCOHERENT=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FS_POSIX_ACL=y
-# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_GEN_RTC is not set
CONFIG_HAVE_STD_PC_SERIAL_PORT=y
@@ -138,10 +136,10 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_OTP is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PHYSMAP_BANKWIDTH is not set
-# CONFIG_MTD_PHYSMAP_LEN is not set
-# CONFIG_MTD_PHYSMAP_START is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_START=0x0
# CONFIG_MTD_PLATRAM is not set
# CONFIG_MTD_RAM is not set
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3
@@ -155,7 +153,6 @@ CONFIG_MTD_SPIFLASH=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PCMCIA is not set
# CONFIG_PCCARD is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_PNX8550_JBS is not set
diff --git a/target/linux/atheros-2.6/files/arch/mips/atheros/Kconfig b/target/linux/atheros-2.6/files/arch/mips/atheros/Kconfig
new file mode 100644
index 0000000000..2170fd710b
--- /dev/null
+++ b/target/linux/atheros-2.6/files/arch/mips/atheros/Kconfig
@@ -0,0 +1,13 @@
+
+config ATHEROS_AR5312
+ bool "Atheros 5312/2312+ support"
+ depends on ATHEROS
+ default y
+
+config ATHEROS_AR5315
+ bool "Atheros 5315/2315+ support"
+ depends on ATHEROS
+ default y
+
+
+
diff --git a/target/linux/atheros-2.6/files/arch/mips/atheros/Makefile b/target/linux/atheros-2.6/files/arch/mips/atheros/Makefile
new file mode 100644
index 0000000000..aff65d723a
--- /dev/null
+++ b/target/linux/atheros-2.6/files/arch/mips/atheros/Makefile
@@ -0,0 +1,22 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+# Copyright (C) 2006 FON Technology, SL.
+# Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+# Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+#
+
+# Makefile for Atheros ar531x boards
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+
+obj-y += board.o prom.o irq.o
+obj-$(CONFIG_ATHEROS_AR5312) += ar5312.o
+obj-$(CONFIG_ATHEROS_AR5315) += ar5315.o
+
diff --git a/target/linux/atheros-2.6/files/arch/mips/atheros/ar5312.c b/target/linux/atheros-2.6/files/arch/mips/atheros/ar5312.c
new file mode 100644
index 0000000000..28b9d3f958
--- /dev/null
+++ b/target/linux/atheros-2.6/files/arch/mips/atheros/ar5312.c
@@ -0,0 +1,471 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+/*
+ * Platform devices for Atheros SoCs
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include "ar531x.h"
+
+
+#define AR531X_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
+#define AR531X_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
+#define AR531X_IRQ_ENET1_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
+#define AR531X_IRQ_WLAN1_INTRS MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
+#define AR531X_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
+
+
+static struct platform_device *ar5312_devs[5];
+
+static struct resource ar5312_eth0_res[] = {
+ {
+ .name = "eth_membase",
+ .flags = IORESOURCE_MEM,
+ .start = KSEG1ADDR(AR531X_ENET0),
+ .end = KSEG1ADDR(AR531X_ENET0 + 0x2000),
+ },
+ {
+ .name = "eth_irq",
+ .flags = IORESOURCE_IRQ,
+ .start = AR531X_IRQ_ENET0_INTRS,
+ .end = AR531X_IRQ_ENET0_INTRS,
+ },
+};
+
+
+static struct resource ar5312_eth1_res[] = {
+ {
+ .name = "eth_membase",
+ .flags = IORESOURCE_MEM,
+ .start = KSEG1ADDR(AR531X_ENET1),
+ .end = KSEG1ADDR(AR531X_ENET1 + 0x2000),
+ },
+ {
+ .name = "eth_irq",
+ .flags = IORESOURCE_IRQ,
+ .start = AR531X_IRQ_ENET1_INTRS,
+ .end = AR531X_IRQ_ENET1_INTRS,
+ },
+};
+
+
+static struct ar531x_eth ar5312_eth0_data = {
+ .phy = 0x1f,
+ .mac = 0,
+ .reset_base = AR531X_RESET,
+ .reset_mac = AR531X_RESET_ENET0,
+ .reset_phy = AR531X_RESET_EPHY0,
+};
+
+static struct ar531x_eth ar5312_eth1_data = {
+ .phy = 0,
+ .mac = 1,
+ .reset_base = AR531X_RESET,
+ .reset_mac = AR531X_RESET_ENET1,
+ .reset_phy = AR531X_RESET_EPHY1,
+};
+
+static struct platform_device ar5312_eth[] = {
+ {
+ .id = 0,
+ .name = "ar531x-eth",
+ .dev.platform_data = &ar5312_eth0_data,
+ .resource = ar5312_eth0_res,
+ .num_resources = ARRAY_SIZE(ar5312_eth0_res)
+ },
+ {
+ .id = 1,
+ .name = "ar531x-eth",
+ .dev.platform_data = &ar5312_eth1_data,
+ .resource = ar5312_eth1_res,
+ .num_resources = ARRAY_SIZE(ar5312_eth1_res)
+ },
+};
+
+static struct platform_device ar5312_wmac[] = {
+ {
+ .id = 0,
+ .name = "ar531x-wmac",
+ },
+ {
+ .id = 1,
+ .name = "ar531x-wmac",
+ },
+};
+
+
+static struct physmap_flash_data ar5312_flash_data = {
+ .width = 2,
+};
+
+static struct resource ar5312_flash_resource = {
+ .start = AR531X_FLASH,
+ .end = AR531X_FLASH + 0x400000 - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ar5312_physmap_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &ar5312_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &ar5312_flash_resource,
+};
+
+
+/*
+ * NB: This mapping size is larger than the actual flash size,
+ * but this shouldn't be a problem here, because the flash
+ * will simply be mapped multiple times.
+ */
+static char __init *ar5312_flash_limit(void)
+{
+ u32 ctl;
+ /* Configure flash bank 0 */
+ ctl = FLASHCTL_E |
+ FLASHCTL_AC_8M |
+ FLASHCTL_RBLE |
+ (0x01 << FLASHCTL_IDCY_S) |
+ (0x07 << FLASHCTL_WST1_S) |
+ (0x07 << FLASHCTL_WST2_S) |
+ (sysRegRead(AR531X_FLASHCTL0) & FLASHCTL_MW);
+
+ sysRegWrite(AR531X_FLASHCTL0, ctl);
+
+ /* Disable other flash banks */
+ sysRegWrite(AR531X_FLASHCTL1,
+ sysRegRead(AR531X_FLASHCTL1) & ~(FLASHCTL_E | FLASHCTL_AC));
+
+ sysRegWrite(AR531X_FLASHCTL2,
+ sysRegRead(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC));
+
+ return (char *) KSEG1ADDR(AR531X_FLASH + 0x400000);
+}
+
+static struct ar531x_config __init *init_wmac(int unit)
+{
+ struct ar531x_config *config;
+
+ config = (struct ar531x_config *) kzalloc(sizeof(struct ar531x_config), GFP_KERNEL);
+ config->board = board_config;
+ config->radio = radio_config;
+ config->unit = unit;
+ config->tag = (u_int16_t) ((sysRegRead(AR531X_REV) >> AR531X_REV_WMAC_MIN_S) & AR531X_REV_CHIP);
+
+ return config;
+}
+
+int __init ar5312_init_devices(void)
+{
+ char *radio;
+ int dev = 0;
+
+ if (mips_machtype != MACH_ATHEROS_AR5312)
+ return 0;
+
+ ar531x_find_config(ar5312_flash_limit());
+ ar5312_eth0_data.board_config = board_config;
+ ar5312_eth1_data.board_config = board_config;
+ ar5312_devs[dev++] = &ar5312_physmap_flash;
+ ar5312_devs[dev++] = &ar5312_eth[0];
+ ar5312_devs[dev++] = &ar5312_eth[1];
+
+ radio = radio_config + AR531X_RADIO_MASK_OFF;
+ if (*((u32 *) radio) & AR531X_RADIO0_MASK) {
+ ar5312_wmac[0].dev.platform_data = init_wmac(0);
+ ar5312_devs[dev++] = &ar5312_wmac[0];
+ }
+ if (*((u32 *) radio) & AR531X_RADIO1_MASK) {
+ ar5312_wmac[1].dev.platform_data = init_wmac(1);
+ ar5312_devs[dev++] = &ar5312_wmac[1];
+ }
+
+ return platform_add_devices(ar5312_devs, dev);
+}
+
+
+/*
+ * Called when an interrupt is received, this function
+ * determines exactly which interrupt it was, and it
+ * invokes the appropriate handler.
+ *
+ * Implicitly, we also define interrupt priority by
+ * choosing which to dispatch first.
+ */
+asmlinkage void ar5312_irq_dispatch(void)
+{
+ int pending = read_c0_status() & read_c0_cause();
+
+ if (pending & CAUSEF_IP2)
+ do_IRQ(AR531X_IRQ_WLAN0_INTRS);
+ else if (pending & CAUSEF_IP3)
+ do_IRQ(AR531X_IRQ_ENET0_INTRS);
+ else if (pending & CAUSEF_IP4)
+ do_IRQ(AR531X_IRQ_ENET1_INTRS);
+ else if (pending & CAUSEF_IP5)
+ do_IRQ(AR531X_IRQ_WLAN1_INTRS);
+ else if (pending & CAUSEF_IP6) {
+ unsigned int ar531x_misc_intrs = sysRegRead(AR531X_ISR) & sysRegRead(AR531X_IMR);
+
+ if (ar531x_misc_intrs & AR531X_ISR_TIMER) {
+ do_IRQ(AR531X_MISC_IRQ_TIMER);
+ (void)sysRegRead(AR531X_TIMER);
+ } else if (ar531x_misc_intrs & AR531X_ISR_AHBPROC)
+ do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
+ else if ((ar531x_misc_intrs & AR531X_ISR_UART0))
+ do_IRQ(AR531X_MISC_IRQ_UART0);
+ else if (ar531x_misc_intrs & AR531X_ISR_WD)
+ do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
+ else
+ do_IRQ(AR531X_MISC_IRQ_NONE);
+ } else if (pending & CAUSEF_IP7) {
+ do_IRQ(AR531X_IRQ_CPU_CLOCK);
+ }
+ else
+ do_IRQ(AR531X_IRQ_NONE);
+}
+
+static void ar5312_halt(void)
+{
+ while (1);
+}
+
+static void ar5312_power_off(void)
+{
+ ar5312_halt();
+}
+
+
+static void ar5312_restart(char *command)
+{
+ /* reset the system */
+ for(;;) sysRegWrite(AR531X_RESET, AR531X_RESET_SYSTEM);
+}
+
+
+/*
+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
+ * to determine the predevisor value.
+ */
+static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = {
+ 1,
+ 2,
+ 4,
+ 5
+};
+
+
+static unsigned int __init ar5312_cpu_frequency(void)
+{
+ unsigned int result;
+ unsigned int predivide_mask, predivide_shift;
+ unsigned int multiplier_mask, multiplier_shift;
+ unsigned int clockCtl1, preDivideSelect, preDivisor, multiplier;
+ unsigned int doubler_mask;
+ unsigned int wisoc_revision;
+
+ /* Trust the bootrom's idea of cpu frequency. */
+ if ((result = sysRegRead(AR5312_SCRATCH)))
+ return result;
+
+ wisoc_revision = (sysRegRead(AR531X_REV) & AR531X_REV_MAJ) >> AR531X_REV_MAJ_S;
+ if (wisoc_revision == AR531X_REV_MAJ_AR2313) {
+ predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
+ predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
+ multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
+ multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT;
+ doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK;
+ } else { /* AR5312 and AR2312 */
+ predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK;
+ predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT;
+ multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK;
+ multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT;
+ doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK;
+ }
+
+ /*
+ * Clocking is derived from a fixed 40MHz input clock.
+ *
+ * cpuFreq = InputClock * MULT (where MULT is PLL multiplier)
+ * sysFreq = cpuFreq / 4 (used for APB clock, serial,
+ * flash, Timer, Watchdog Timer)
+ *
+ * cntFreq = cpuFreq / 2 (use for CPU count/compare)
+ *
+ * So, for example, with a PLL multiplier of 5, we have
+ *
+ * cpuFreq = 200MHz
+ * sysFreq = 50MHz
+ * cntFreq = 100MHz
+ *
+ * We compute the CPU frequency, based on PLL settings.
+ */
+
+ clockCtl1 = sysRegRead(AR5312_CLOCKCTL1);
+ preDivideSelect = (clockCtl1 & predivide_mask) >> predivide_shift;
+ preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect];
+ multiplier = (clockCtl1 & multiplier_mask) >> multiplier_shift;
+
+ if (clockCtl1 & doubler_mask) {
+ multiplier = multiplier << 1;
+ }
+ return (40000000 / preDivisor) * multiplier;
+}
+
+static inline int ar5312_sys_frequency(void)
+{
+ return ar5312_cpu_frequency() / 4;
+}
+
+static void __init ar5312_time_init(void)
+{
+ mips_hpt_frequency = ar5312_cpu_frequency() / 2;
+}
+
+
+/* Enable the specified AR531X_MISC_IRQ interrupt */
+static void
+ar5312_misc_intr_enable(unsigned int irq)
+{
+ unsigned int imr;
+
+ imr = sysRegRead(AR531X_IMR);
+ imr |= (1 << (irq - AR531X_MISC_IRQ_BASE - 1));
+ sysRegWrite(AR531X_IMR, imr);
+ sysRegRead(AR531X_IMR); /* flush write buffer */
+}
+
+/* Disable the specified AR531X_MISC_IRQ interrupt */
+static void
+ar5312_misc_intr_disable(unsigned int irq)
+{
+ unsigned int imr;
+
+ imr = sysRegRead(AR531X_IMR);
+ imr &= ~(1 << (irq - AR531X_MISC_IRQ_BASE - 1));
+ sysRegWrite(AR531X_IMR, imr);
+ sysRegRead(AR531X_IMR); /* flush write buffer */
+}
+
+/* Turn on the specified AR531X_MISC_IRQ interrupt */
+static unsigned int
+ar5312_misc_intr_startup(unsigned int irq)
+{
+ ar5312_misc_intr_enable(irq);
+ return 0;
+}
+
+/* Turn off the specified AR531X_MISC_IRQ interrupt */
+static void
+ar5312_misc_intr_shutdown(unsigned int irq)
+{
+ ar5312_misc_intr_disable(irq);
+}
+
+static void
+ar5312_misc_intr_ack(unsigned int irq)
+{
+ ar5312_misc_intr_disable(irq);
+}
+
+static void
+ar5312_misc_intr_end(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+ ar5312_misc_intr_enable(irq);
+}
+
+static struct irq_chip ar5312_misc_intr_controller = {
+ .typename = "AR5312 misc",
+ .startup = ar5312_misc_intr_startup,
+ .shutdown = ar5312_misc_intr_shutdown,
+ .enable = ar5312_misc_intr_enable,
+ .disable = ar5312_misc_intr_disable,
+ .ack = ar5312_misc_intr_ack,
+ .end = ar5312_misc_intr_end,
+};
+
+static irqreturn_t ar5312_ahb_proc_handler(int cpl, void *dev_id)
+{
+ u32 proc1 = sysRegRead(AR531X_PROC1);
+ u32 procAddr = sysRegRead(AR531X_PROCADDR); /* clears error state */
+ u32 dma1 = sysRegRead(AR531X_DMA1);
+ u32 dmaAddr = sysRegRead(AR531X_DMAADDR); /* clears error state */
+
+ printk("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n",
+ procAddr, proc1, dmaAddr, dma1);
+
+ machine_restart("AHB error"); /* Catastrophic failure */
+ return IRQ_HANDLED;
+}
+
+
+static struct irqaction ar5312_ahb_proc_interrupt = {
+ .handler = ar5312_ahb_proc_handler,
+ .flags = SA_INTERRUPT,
+ .name = "ar5312_ahb_proc_interrupt",
+};
+
+
+static struct irqaction cascade = {
+ .handler = no_action,
+ .flags = SA_INTERRUPT,
+ .name = "cascade",
+};
+
+void __init ar5312_misc_intr_init(int irq_base)
+{
+ int i;
+
+ for (i = irq_base; i < irq_base + AR531X_MISC_IRQ_COUNT; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = NULL;
+ irq_desc[i].depth = 1;
+ irq_desc[i].chip = &ar5312_misc_intr_controller;
+ }
+ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5312_ahb_proc_interrupt);
+ setup_irq(AR531X_IRQ_MISC_INTRS, &cascade);
+}
+
+
+void __init ar5312_plat_setup(void)
+{
+ /* Clear any lingering AHB errors */
+ sysRegRead(AR531X_PROCADDR);
+ sysRegRead(AR531X_DMAADDR);
+ sysRegWrite(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION);
+
+ board_time_init = ar5312_time_init;
+
+ _machine_restart = ar5312_restart;
+ _machine_halt = ar5312_halt;
+ pm_power_off = ar5312_power_off;
+
+ serial_setup(KSEG1ADDR(AR531X_UART0), ar5312_sys_frequency());
+}
+
+arch_initcall(ar5312_init_devices);
diff --git a/target/linux/atheros-2.6/files/arch/mips/atheros/ar5312.h b/target/linux/atheros-2.6/files/arch/mips/atheros/ar5312.h
new file mode 100644
index 0000000000..b6e71b8901
--- /dev/null
+++ b/target/linux/atheros-2.6/files/arch/mips/atheros/ar5312.h
@@ -0,0 +1,223 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+#ifndef AR5312_H
+#define AR5312_H
+
+#include <asm/addrspace.h>
+
+/* Address Map */
+#define AR531X_WLAN0 0x18000000
+#define AR531X_WLAN1 0x18500000
+#define AR531X_ENET0 0x18100000
+#define AR531X_ENET1 0x18200000
+#define AR531X_SDRAMCTL 0x18300000
+#define AR531X_FLASHCTL 0x18400000
+#define AR531X_APBBASE 0x1c000000
+#define AR531X_FLASH 0x1e000000
+#define AR531X_UART0 0xbc000003 /* UART MMR */
+
+/*
+ * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that
+ * should be considered available. The AR5312 supports 2 enet MACS,
+ * even though many reference boards only actually use 1 of them
+ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
+ * The AR2312 supports 1 enet MAC.
+ */
+#define AR531X_NUM_ENET_MAC 2
+
+/*
+ * Need these defines to determine true number of ethernet MACs
+ */
+#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
+#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
+#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
+#define AR531X_RADIO_MASK_OFF 0xc8
+#define AR531X_RADIO0_MASK 0x0003
+#define AR531X_RADIO1_MASK 0x000c
+#define AR531X_RADIO1_S 2
+
+/*
+ * AR531X_NUM_WMAC defines the number of Wireless MACs that\
+ * should be considered available.
+ */
+#define AR531X_NUM_WMAC 2
+
+/* Reset/Timer Block Address Map */
+#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000)
+#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */
+#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */
+#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */
+#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */
+#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */
+#define AR531X_RESET (AR531X_RESETTMR + 0x0020)
+#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064)
+#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c)
+#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070)
+#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074)
+#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078)
+#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c)
+#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */
+#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */
+
+/* AR531X_WD_CTRL register bit field definitions */
+#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000
+#define AR531X_WD_CTRL_NMI 0x0001
+#define AR531X_WD_CTRL_RESET 0x0002
+
+/* AR531X_ISR register bit field definitions */
+#define AR531X_ISR_NONE 0x0000
+#define AR531X_ISR_TIMER 0x0001
+#define AR531X_ISR_AHBPROC 0x0002
+#define AR531X_ISR_AHBDMA 0x0004
+#define AR531X_ISR_GPIO 0x0008
+#define AR531X_ISR_UART0 0x0010
+#define AR531X_ISR_UART0DMA 0x0020
+#define AR531X_ISR_WD 0x0040
+#define AR531X_ISR_LOCAL 0x0080
+
+/* AR531X_RESET register bit field definitions */
+#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */
+#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */
+#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */
+#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
+#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
+#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */
+#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */
+#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */
+#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */
+#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */
+#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */
+#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */
+#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */
+#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */
+#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */
+#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */
+#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */
+#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */
+
+#define AR531X_RESET_WMAC0_BITS \
+ AR531X_RESET_WLAN0 |\
+ AR531X_RESET_WARM_WLAN0_MAC |\
+ AR531X_RESET_WARM_WLAN0_BB
+
+#define AR531X_RESERT_WMAC1_BITS \
+ AR531X_RESET_WLAN1 |\
+ AR531X_RESET_WARM_WLAN1_MAC |\
+ AR531X_RESET_WARM_WLAN1_BB
+
+/* AR5312_CLOCKCTL1 register bit field definitions */
+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
+
+/* Valid for AR5312 and AR2312 */
+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
+
+/* Valid for AR2313 */
+#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000
+#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12
+#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000
+#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16
+#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000
+
+
+/* AR531X_ENABLE register bit field definitions */
+#define AR531X_ENABLE_WLAN0 0x0001
+#define AR531X_ENABLE_ENET0 0x0002
+#define AR531X_ENABLE_ENET1 0x0004
+#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */
+#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */
+#define AR531X_ENABLE_WLAN1 \
+ (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA)
+
+/* AR531X_REV register bit field definitions */
+#define AR531X_REV_WMAC_MAJ 0xf000
+#define AR531X_REV_WMAC_MAJ_S 12
+#define AR531X_REV_WMAC_MIN 0x0f00
+#define AR531X_REV_WMAC_MIN_S 8
+#define AR531X_REV_MAJ 0x00f0
+#define AR531X_REV_MAJ_S 4
+#define AR531X_REV_MIN 0x000f
+#define AR531X_REV_MIN_S 0
+#define AR531X_REV_CHIP (REV_MAJ|REV_MIN)
+
+/* Major revision numbers, bits 7..4 of Revision ID register */
+#define AR531X_REV_MAJ_AR5312 0x4
+#define AR531X_REV_MAJ_AR2313 0x5
+
+/* Minor revision numbers, bits 3..0 of Revision ID register */
+#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */
+#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */
+
+/* AR531X_FLASHCTL register bit field definitions */
+#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */
+#define FLASHCTL_IDCY_S 0
+#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */
+#define FLASHCTL_WST1_S 5
+#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */
+#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */
+#define FLASHCTL_WST2_S 11
+#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */
+#define FLASHCTL_AC_S 16
+#define FLASHCTL_AC_128K 0x00000000
+#define FLASHCTL_AC_256K 0x00010000
+#define FLASHCTL_AC_512K 0x00020000
+#define FLASHCTL_AC_1M 0x00030000
+#define FLASHCTL_AC_2M 0x00040000
+#define FLASHCTL_AC_4M 0x00050000
+#define FLASHCTL_AC_8M 0x00060000
+#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */
+#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */
+#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */
+#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */
+#define FLASHCTL_WP 0x04000000 /* Write protect */
+#define FLASHCTL_BM 0x08000000 /* Burst mode */
+#define FLASHCTL_MW 0x30000000 /* Memory width */
+#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */
+#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */
+#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */
+#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */
+#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */
+#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */
+
+/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */
+#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00)
+#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04)
+#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08)
+
+/* ARM SDRAM Controller -- just enough to determine memory size */
+#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04)
+#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */
+#define MEM_CFG1_AC0_S 8
+#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */
+#define MEM_CFG1_AC1_S 12
+
+/* GPIO Address Map */
+#define AR531X_GPIO (AR531X_APBBASE + 0x2000)
+#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */
+#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */
+#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */
+
+/* GPIO Control Register bit field definitions */
+#define AR531X_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
+#define AR531X_GPIO_CR_O(x) (0 << (x)) /* mask for output */
+#define AR531X_GPIO_CR_I(x) (1 << (x)) /* mask for input */
+#define AR531X_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */
+#define AR531X_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */
+
+#endif
+
diff --git a/target/linux/atheros-2.6/files/arch/mips/atheros/ar5315.c b/target/linux/atheros-2.6/files/arch/mips/atheros/ar5315.c
new file mode 100644
index 0000000000..78b2835914
--- /dev/null
+++ b/target/linux/atheros-2.6/files/arch/mips/atheros/ar5315.c
@@ -0,0 +1,529 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+/*
+ * Platform devices for Atheros SoCs
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include "ar531x.h"
+
+#define AR531X_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
+#define AR531X_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
+#define AR531X_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
+#define AR531X_IRQ_LCBUS_PCI MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
+#define AR531X_IRQ_WLAN0_POLL MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
+
+static struct resource ar5315_eth_res[] = {
+ {
+ .name = "eth_membase",
+ .flags = IORESOURCE_MEM,
+ .start = AR5315_ENET0,
+ .end = AR5315_ENET0 + 0x2000,
+ },
+ {
+ .name = "eth_irq",
+ .flags = IORESOURCE_IRQ,
+ .start = AR531X_IRQ_ENET0_INTRS,
+ .end = AR531X_IRQ_ENET0_INTRS,
+ },
+};
+
+static struct ar531x_eth ar5315_eth_data = {
+ .phy = 1,
+ .mac = 0,
+ .reset_base = AR5315_RESET,
+ .reset_mac = AR5315_RESET_ENET0,
+ .reset_phy = AR5315_RESET_EPHY0,
+};
+
+static struct platform_device ar5315_eth = {
+ .id = 0,
+ .name = "ar531x-eth",
+ .dev.platform_data = &ar5315_eth_data,
+ .resource = ar5315_eth_res,
+ .num_resources = ARRAY_SIZE(ar5315_eth_res)
+};
+
+static struct platform_device ar5315_wmac = {
+ .id = 0,
+ .name = "ar531x-wmac",
+ /* FIXME: add resources */
+};
+
+static struct resource ar5315_spiflash_res[] = {
+ {
+ .name = "flash_base",
+ .flags = IORESOURCE_MEM,
+ .start = KSEG1ADDR(AR5315_SPI_READ),
+ .end = KSEG1ADDR(AR5315_SPI_READ) + 0x800000,
+ },
+ {
+ .name = "flash_regs",
+ .flags = IORESOURCE_MEM,
+ .start = 0x11300000,
+ .end = 0x11300012,
+ },
+};
+
+static struct platform_device ar5315_spiflash = {
+ .id = 0,
+ .name = "spiflash",
+ .resource = ar5315_spiflash_res,
+ .num_resources = ARRAY_SIZE(ar5315_spiflash_res)
+};
+
+static __initdata struct platform_device *ar5315_devs[4];
+
+
+
+static void *flash_regs;
+
+static inline __u32 spiflash_regread32(int reg)
+{
+ volatile __u32 *data = (__u32 *)(flash_regs + reg);
+
+ return (*data);
+}
+
+static inline void spiflash_regwrite32(int reg, __u32 data)
+{
+ volatile __u32 *addr = (__u32 *)(flash_regs + reg);
+
+ *addr = data;
+}
+
+#define SPI_FLASH_CTL 0x00
+#define SPI_FLASH_OPCODE 0x04
+#define SPI_FLASH_DATA 0x08
+
+static __u8 spiflash_probe(void)
+{
+ __u32 reg;
+
+ do {
+ reg = spiflash_regread32(SPI_FLASH_CTL);
+ } while (reg & SPI_CTL_BUSY);
+
+ spiflash_regwrite32(SPI_FLASH_OPCODE, 0xab);
+
+ reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | 4 |
+ (1 << 4) | SPI_CTL_START;
+
+ spiflash_regwrite32(SPI_FLASH_CTL, reg);
+
+ do {
+ reg = spiflash_regread32(SPI_FLASH_CTL);
+ } while (reg & SPI_CTL_BUSY);
+
+ reg = (__u32) spiflash_regread32(SPI_FLASH_DATA);
+ reg &= 0xff;
+
+ return (u8) reg;
+}
+
+
+#define STM_8MBIT_SIGNATURE 0x13
+#define STM_16MBIT_SIGNATURE 0x14
+#define STM_32MBIT_SIGNATURE 0x15
+#define STM_64MBIT_SIGNATURE 0x16
+
+
+static char __init *ar5315_flash_limit(void)
+{
+ u8 sig;
+ u32 flash_size = 0;
+
+ /* probe the flash chip size */
+ flash_regs = ioremap_nocache(ar5315_spiflash_res[1].start, ar5315_spiflash_res[1].end - ar5315_spiflash_res[1].start);
+ sig = spiflash_probe();
+ iounmap(flash_regs);
+
+ switch(sig) {
+ case STM_8MBIT_SIGNATURE:
+ flash_size = 0x00100000;
+ break;
+ case STM_16MBIT_SIGNATURE:
+ flash_size = 0x00200000;
+ break;
+ case STM_32MBIT_SIGNATURE:
+ flash_size = 0x00400000;
+ break;
+ case STM_64MBIT_SIGNATURE:
+ flash_size = 0x00800000;
+ break;
+ }
+
+ ar5315_spiflash_res[0].end = ar5315_spiflash_res[0].start + flash_size;
+ return (char *) ar5315_spiflash_res[0].end;
+}
+
+int __init ar5315_init_devices(void)
+{
+ struct ar531x_config *config;
+ int dev = 0;
+
+ if (mips_machtype != MACH_ATHEROS_AR5315)
+ return 0;
+
+ ar531x_find_config(ar5315_flash_limit());
+
+ config = (struct ar531x_config *) kzalloc(sizeof(struct ar531x_config), GFP_KERNEL);
+ config->board = board_config;
+ config->radio = radio_config;
+ config->unit = 0;
+ config->tag = (u_int16_t) (sysRegRead(AR5315_SREV) & REV_CHIP);
+
+ ar5315_eth_data.board_config = board_config;
+ ar5315_wmac.dev.platform_data = config;
+
+ ar5315_devs[dev++] = &ar5315_eth;
+ ar5315_devs[dev++] = &ar5315_wmac;
+ ar5315_devs[dev++] = &ar5315_spiflash;
+
+ return platform_add_devices(ar5315_devs, dev);
+}
+
+
+/*
+ * Called when an interrupt is received, this function
+ * determines exactly which interrupt it was, and it
+ * invokes the appropriate handler.
+ *
+ * Implicitly, we also define interrupt priority by
+ * choosing which to dispatch first.
+ */
+asmlinkage void ar5315_irq_dispatch(void)
+{
+ int pending = read_c0_status() & read_c0_cause();
+
+ if (pending & CAUSEF_IP3)
+ do_IRQ(AR531X_IRQ_WLAN0_INTRS);
+ else if (pending & CAUSEF_IP4)
+ do_IRQ(AR531X_IRQ_ENET0_INTRS);
+ else if (pending & CAUSEF_IP2) {
+ unsigned int ar531x_misc_intrs = sysRegRead(AR5315_ISR) & sysRegRead(AR5315_IMR);
+
+ if (ar531x_misc_intrs & AR5315_ISR_TIMER)
+ do_IRQ(AR531X_MISC_IRQ_TIMER);
+ else if (ar531x_misc_intrs & AR5315_ISR_AHB)
+ do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
+ else if (ar531x_misc_intrs & AR5315_ISR_GPIO) {
+ sysRegWrite(AR5315_ISR, sysRegRead(AR5315_IMR) | ~AR5315_ISR_GPIO);
+ } else if (ar531x_misc_intrs & AR5315_ISR_UART0)
+ do_IRQ(AR531X_MISC_IRQ_UART0);
+ else if (ar531x_misc_intrs & AR5315_ISR_WD)
+ do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
+ else
+ do_IRQ(AR531X_MISC_IRQ_NONE);
+ } else if (pending & CAUSEF_IP7)
+ do_IRQ(AR531X_IRQ_CPU_CLOCK);
+ else
+ do_IRQ(AR531X_IRQ_NONE);
+}
+
+static void ar5315_halt(void)
+{
+ while (1);
+}
+
+static void ar5315_power_off(void)
+{
+ ar5315_halt();
+}
+
+
+static void ar5315_restart(char *command)
+{
+ unsigned int reg;
+ for(;;) {
+
+ /* reset the system */
+ sysRegWrite(AR5315_COLD_RESET,AR5317_RESET_SYSTEM);
+
+ /*
+ * Cold reset does not work on the AR2315/6, use the GPIO reset bits a workaround.
+ */
+
+ reg = sysRegRead(AR5315_GPIO_DO);
+ reg &= ~(1 << AR5315_RESET_GPIO);
+ sysRegWrite(AR5315_GPIO_DO, reg);
+ (void)sysRegRead(AR5315_GPIO_DO); /* flush write to hardware */
+ }
+}
+
+
+/*
+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
+ * to determine the predevisor value.
+ */
+static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = {
+ 1,
+ 2,
+ 4,
+ 5
+};
+
+static int __initdata PLLC_DIVIDE_TABLE[5] = {
+ 2,
+ 3,
+ 4,
+ 6,
+ 3
+};
+
+static unsigned int __init
+ar5315_sys_clk(unsigned int clockCtl)
+{
+ unsigned int pllcCtrl,cpuDiv;
+ unsigned int pllcOut,refdiv,fdiv,divby2;
+ unsigned int clkDiv;
+
+ pllcCtrl = sysRegRead(AR5315_PLLC_CTL);
+ refdiv = (pllcCtrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S;
+ refdiv = CLOCKCTL1_PREDIVIDE_TABLE[refdiv];
+ fdiv = (pllcCtrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S;
+ divby2 = (pllcCtrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S;
+ divby2 += 1;
+ pllcOut = (40000000/refdiv)*(2*divby2)*fdiv;
+
+
+ /* clkm input selected */
+ switch(clockCtl & CPUCLK_CLK_SEL_M) {
+ case 0:
+ case 1:
+ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKM_DIV_M) >> PLLC_CLKM_DIV_S];
+ break;
+ case 2:
+ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKC_DIV_M) >> PLLC_CLKC_DIV_S];
+ break;
+ default:
+ pllcOut = 40000000;
+ clkDiv = 1;
+ break;
+ }
+ cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S;
+ cpuDiv = cpuDiv * 2 ?: 1;
+ return (pllcOut/(clkDiv * cpuDiv));
+}
+
+static inline unsigned int ar5315_cpu_frequency(void)
+{
+ return ar5315_sys_clk(sysRegRead(AR5315_CPUCLK));
+}
+
+static inline unsigned int ar5315_apb_frequency(void)
+{
+ return ar5315_sys_clk(sysRegRead(AR5315_AMBACLK));
+}
+
+static void __init ar5315_time_init(void)
+{
+ mips_hpt_frequency = ar5315_cpu_frequency() / 2;
+}
+
+
+
+/* Enable the specified AR531X_MISC_IRQ interrupt */
+static void
+ar5315_misc_intr_enable(unsigned int irq)
+{
+ unsigned int imr;
+
+ imr = sysRegRead(AR5315_IMR);
+ switch(irq)
+ {
+ case AR531X_MISC_IRQ_TIMER:
+ imr |= AR5315_ISR_TIMER;
+ break;
+
+ case AR531X_MISC_IRQ_AHB_PROC:
+ imr |= AR5315_ISR_AHB;
+ break;
+
+ case AR531X_MISC_IRQ_AHB_DMA:
+ imr |= 0/* ?? */;
+ break;
+
+ case AR531X_MISC_IRQ_GPIO:
+ imr |= AR5315_ISR_GPIO;
+ break;
+
+ case AR531X_MISC_IRQ_UART0:
+ imr |= AR5315_ISR_UART0;
+ break;
+
+
+ case AR531X_MISC_IRQ_WATCHDOG:
+ imr |= AR5315_ISR_WD;
+ break;
+
+ case AR531X_MISC_IRQ_LOCAL:
+ imr |= 0/* ?? */;
+ break;
+
+ }
+ sysRegWrite(AR5315_IMR, imr);
+ imr=sysRegRead(AR5315_IMR); /* flush write buffer */
+ //printk("enable Interrupt irq 0x%x imr 0x%x \n",irq,imr);
+
+}
+
+/* Disable the specified AR531X_MISC_IRQ interrupt */
+static void
+ar5315_misc_intr_disable(unsigned int irq)
+{
+ unsigned int imr;
+
+ imr = sysRegRead(AR5315_IMR);
+ switch(irq)
+ {
+ case AR531X_MISC_IRQ_TIMER:
+ imr &= (~AR5315_ISR_TIMER);
+ break;
+
+ case AR531X_MISC_IRQ_AHB_PROC:
+ imr &= (~AR5315_ISR_AHB);
+ break;
+
+ case AR531X_MISC_IRQ_AHB_DMA:
+ imr &= 0/* ?? */;
+ break;
+
+ case AR531X_MISC_IRQ_GPIO:
+ imr &= ~AR5315_ISR_GPIO;
+ break;
+
+ case AR531X_MISC_IRQ_UART0:
+ imr &= (~AR5315_ISR_UART0);
+ break;
+
+ case AR531X_MISC_IRQ_WATCHDOG:
+ imr &= (~AR5315_ISR_WD);
+ break;
+
+ case AR531X_MISC_IRQ_LOCAL:
+ imr &= ~0/* ?? */;
+ break;
+
+ }
+ sysRegWrite(AR5315_IMR, imr);
+ sysRegRead(AR5315_IMR); /* flush write buffer */
+}
+
+/* Turn on the specified AR531X_MISC_IRQ interrupt */
+static unsigned int
+ar5315_misc_intr_startup(unsigned int irq)
+{
+ ar5315_misc_intr_enable(irq);
+ return 0;
+}
+
+/* Turn off the specified AR531X_MISC_IRQ interrupt */
+static void
+ar5315_misc_intr_shutdown(unsigned int irq)
+{
+ ar5315_misc_intr_disable(irq);
+}
+
+static void
+ar5315_misc_intr_ack(unsigned int irq)
+{
+ ar5315_misc_intr_disable(irq);
+}
+
+static void
+ar5315_misc_intr_end(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+ ar5315_misc_intr_enable(irq);
+}
+
+static struct irq_chip ar5315_misc_intr_controller = {
+ .typename = "AR5315 misc",
+ .startup = ar5315_misc_intr_startup,
+ .shutdown = ar5315_misc_intr_shutdown,
+ .enable = ar5315_misc_intr_enable,
+ .disable = ar5315_misc_intr_disable,
+ .ack = ar5315_misc_intr_ack,
+ .end = ar5315_misc_intr_end,
+};
+
+static irqreturn_t ar5315_ahb_proc_handler(int cpl, void *dev_id)
+{
+ sysRegWrite(AR5315_AHB_ERR0,AHB_ERROR_DET);
+ sysRegRead(AR5315_AHB_ERR1);
+
+ printk("AHB fatal error\n");
+ machine_restart("AHB error"); /* Catastrophic failure */
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction ar5315_ahb_proc_interrupt = {
+ .handler = ar5315_ahb_proc_handler,
+ .flags = SA_INTERRUPT,
+ .name = "ar5315_ahb_proc_interrupt",
+};
+
+
+static struct irqaction cascade = {
+ .handler = no_action,
+ .flags = SA_INTERRUPT,
+ .name = "cascade",
+};
+
+void ar5315_misc_intr_init(int irq_base)
+{
+ int i;
+
+ for (i = irq_base; i < irq_base + AR531X_MISC_IRQ_COUNT; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = NULL;
+ irq_desc[i].depth = 1;
+ irq_desc[i].chip = &ar5315_misc_intr_controller;
+ }
+ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5315_ahb_proc_interrupt);
+ setup_irq(AR531X_IRQ_MISC_INTRS, &cascade);
+}
+
+void __init ar5315_plat_setup(void)
+{
+ unsigned int config = read_c0_config();
+
+ /* Clear any lingering AHB errors */
+ write_c0_config(config & ~0x3);
+ sysRegWrite(AR5315_AHB_ERR0,AHB_ERROR_DET);
+ sysRegRead(AR5315_AHB_ERR1);
+ sysRegWrite(AR5315_WDC, WDC_IGNORE_EXPIRATION);
+
+ board_time_init = ar5315_time_init;
+
+ _machine_restart = ar5315_restart;
+ _machine_halt = ar5315_halt;
+ pm_power_off = ar5315_power_off;
+
+ serial_setup(KSEG1ADDR(AR5315_UART0), ar5315_apb_frequency());
+}
+
+arch_initcall(ar5315_init_devices);
diff --git a/target/linux/atheros-2.6/files/arch/mips/atheros/ar5315.h b/target/linux/atheros-2.6/files/arch/mips/atheros/ar5315.h
new file mode 100644
index 0000000000..b523f80405
--- /dev/null
+++ b/target/linux/atheros-2.6/files/arch/mips/atheros/ar5315.h
@@ -0,0 +1,678 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+#ifndef AR5315_H
+#define AR5315_H
+
+/*
+ * Address map
+ */
+#define AR5315_SDRAM0 0x00000000 /* DRAM */
+#define AR5315_SPI_READ 0x08000000 /* SPI FLASH */
+#define AR5315_WLAN0 0xB0000000 /* Wireless MMR */
+#define AR5315_PCI 0xB0100000 /* PCI MMR */
+#define AR5315_SDRAMCTL 0xB0300000 /* SDRAM MMR */
+#define AR5315_LOCAL 0xB0400000 /* LOCAL BUS MMR */
+#define AR5315_ENET0 0xB0500000 /* ETHERNET MMR */
+#define AR5315_DSLBASE 0xB1000000 /* RESET CONTROL MMR */
+#define AR5315_UART0 0xB1100003 /* UART MMR */
+#define AR5315_SPI 0xB1300000 /* SPI FLASH MMR */
+#define AR5315_FLASHBT 0xBfc00000 /* ro boot alias to FLASH */
+#define AR5315_RAM1 0x40000000 /* ram alias */
+#define AR5315_PCIEXT 0x80000000 /* pci external */
+#define AR5315_RAM2 0xc0000000 /* ram alias */
+#define AR5315_RAM3 0xe0000000 /* ram alias */
+
+/*
+ * Reset Register
+ */
+#define AR5315_COLD_RESET (AR5315_DSLBASE + 0x0000)
+
+/* Cold Reset */
+#define RESET_COLD_AHB 0x00000001
+#define RESET_COLD_APB 0x00000002
+#define RESET_COLD_CPU 0x00000004
+#define RESET_COLD_CPUWARM 0x00000008
+#define RESET_SYSTEM (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB) /* full system */
+
+#define AR5317_RESET_SYSTEM 0x00000010
+
+/* Warm Reset */
+
+#define AR5315_RESET (AR5315_DSLBASE + 0x0004)
+
+#define AR5315_RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */
+#define AR5315_RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BaseBand */
+#define AR5315_RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */
+#define AR5315_RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */
+#define AR5315_RESET_MEMCTL 0x00000010 /* warm reset memory controller */
+#define AR5315_RESET_LOCAL 0x00000020 /* warm reset local bus */
+#define AR5315_RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */
+#define AR5315_RESET_SPI 0x00000080 /* warm reset SPI interface */
+#define AR5315_RESET_UART0 0x00000100 /* warm reset UART0 */
+#define AR5315_RESET_IR_RSVD 0x00000200 /* warm reset IR interface */
+#define AR5315_RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */
+#define AR5315_RESET_ENET0 0x00000800 /* cold reset ENET0 mac */
+
+/*
+ * AHB master arbitration control
+ */
+#define AR5315_AHB_ARB_CTL (AR5315_DSLBASE + 0x0008)
+
+#define ARB_CPU 0x00000001 /* CPU, default */
+#define ARB_WLAN 0x00000002 /* WLAN */
+#define ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */
+#define ARB_LOCAL 0x00000008 /* LOCAL */
+#define ARB_PCI 0x00000010 /* PCI */
+#define ARB_ETHERNET 0x00000020 /* Ethernet */
+#define ARB_RETRY 0x00000100 /* retry policy, debug only */
+
+/*
+ * Config Register
+ */
+#define AR5315_ENDIAN_CTL (AR5315_DSLBASE + 0x000c)
+
+#define CONFIG_AHB 0x00000001 /* EC - AHB bridge endianess */
+#define CONFIG_WLAN 0x00000002 /* WLAN byteswap */
+#define CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */
+#define CONFIG_PCI 0x00000008 /* PCI byteswap */
+#define CONFIG_MEMCTL 0x00000010 /* Memory controller endianess */
+#define CONFIG_LOCAL 0x00000020 /* Local bus byteswap */
+#define CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */
+
+#define CONFIG_MERGE 0x00000200 /* CPU write buffer merge */
+#define CONFIG_CPU 0x00000400 /* CPU big endian */
+#define CONFIG_PCIAHB 0x00000800
+#define CONFIG_PCIAHB_BRIDGE 0x00001000
+#define CONFIG_SPI 0x00008000 /* SPI byteswap */
+#define CONFIG_CPU_DRAM 0x00010000
+#define CONFIG_CPU_PCI 0x00020000
+#define CONFIG_CPU_MMR 0x00040000
+#define CONFIG_BIG 0x00000400
+
+
+/*
+ * NMI control
+ */
+#define AR5315_NMI_CTL (AR5315_DSLBASE + 0x0010)
+
+#define NMI_EN 1
+
+/*
+ * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0).
+ */
+#define AR5315_SREV (AR5315_DSLBASE + 0x0014)
+
+#define REV_MAJ 0x00f0
+#define REV_MAJ_S 4
+#define REV_MIN 0x000f
+#define REV_MIN_S 0
+#define REV_CHIP (REV_MAJ|REV_MIN)
+
+/*
+ * Interface Enable
+ */
+#define AR5315_IF_CTL (AR5315_DSLBASE + 0x0018)
+
+#define IF_MASK 0x00000007
+#define IF_DISABLED 0
+#define IF_PCI 1
+#define IF_TS_LOCAL 2
+#define IF_ALL 3 /* only for emulation with separate pins */
+#define IF_LOCAL_HOST 0x00000008
+#define IF_PCI_HOST 0x00000010
+#define IF_PCI_INTR 0x00000020
+#define IF_PCI_CLK_MASK 0x00030000
+#define IF_PCI_CLK_INPUT 0
+#define IF_PCI_CLK_OUTPUT_LOW 1
+#define IF_PCI_CLK_OUTPUT_CLK 2
+#define IF_PCI_CLK_OUTPUT_HIGH 3
+#define IF_PCI_CLK_SHIFT 16
+
+
+/* Major revision numbers, bits 7..4 of Revision ID register */
+#define REV_MAJ_AR5311 0x01
+#define REV_MAJ_AR5312 0x04
+#define REV_MAJ_AR5315 0x0B
+
+/*
+ * APB Interrupt control
+ */
+
+#define AR5315_ISR (AR5315_DSLBASE + 0x0020)
+#define AR5315_IMR (AR5315_DSLBASE + 0x0024)
+#define AR5315_GISR (AR5315_DSLBASE + 0x0028)
+
+#define AR5315_ISR_UART0 0x0001 /* high speed UART */
+#define AR5315_ISR_I2C_RSVD 0x0002 /* I2C bus */
+#define AR5315_ISR_SPI 0x0004 /* SPI bus */
+#define AR5315_ISR_AHB 0x0008 /* AHB error */
+#define AR5315_ISR_APB 0x0010 /* APB error */
+#define AR5315_ISR_TIMER 0x0020 /* timer */
+#define AR5315_ISR_GPIO 0x0040 /* GPIO */
+#define AR5315_ISR_WD 0x0080 /* watchdog */
+#define AR5315_ISR_IR_RSVD 0x0100 /* IR */
+
+#define AR5315_GISR_MISC 0x0001
+#define AR5315_GISR_WLAN0 0x0002
+#define AR5315_GISR_MPEGTS_RSVD 0x0004
+#define AR5315_GISR_LOCALPCI 0x0008
+#define AR5315_GISR_WMACPOLL 0x0010
+#define AR5315_GISR_TIMER 0x0020
+#define AR5315_GISR_ETHERNET 0x0040
+
+/*
+ * Interrupt routing from IO to the processor IP bits
+ * Define our inter mask and level
+ */
+#define AR5315_INTR_MISCIO SR_IBIT3
+#define AR5315_INTR_WLAN0 SR_IBIT4
+#define AR5315_INTR_ENET0 SR_IBIT5
+#define AR5315_INTR_LOCALPCI SR_IBIT6
+#define AR5315_INTR_WMACPOLL SR_IBIT7
+#define AR5315_INTR_COMPARE SR_IBIT8
+
+/*
+ * Timers
+ */
+#define AR5315_TIMER (AR5315_DSLBASE + 0x0030)
+#define AR5315_RELOAD (AR5315_DSLBASE + 0x0034)
+#define AR5315_WD (AR5315_DSLBASE + 0x0038)
+#define AR5315_WDC (AR5315_DSLBASE + 0x003c)
+
+#define WDC_RESET 0x00000002 /* reset on watchdog */
+#define WDC_NMI 0x00000001 /* NMI on watchdog */
+#define WDC_IGNORE_EXPIRATION 0x00000000
+
+/*
+ * CPU Performance Counters
+ */
+#define AR5315_PERFCNT0 (AR5315_DSLBASE + 0x0048)
+#define AR5315_PERFCNT1 (AR5315_DSLBASE + 0x004c)
+
+#define PERF_DATAHIT 0x0001 /* Count Data Cache Hits */
+#define PERF_DATAMISS 0x0002 /* Count Data Cache Misses */
+#define PERF_INSTHIT 0x0004 /* Count Instruction Cache Hits */
+#define PERF_INSTMISS 0x0008 /* Count Instruction Cache Misses */
+#define PERF_ACTIVE 0x0010 /* Count Active Processor Cycles */
+#define PERF_WBHIT 0x0020 /* Count CPU Write Buffer Hits */
+#define PERF_WBMISS 0x0040 /* Count CPU Write Buffer Misses */
+
+#define PERF_EB_ARDY 0x0001 /* Count EB_ARdy signal */
+#define PERF_EB_AVALID 0x0002 /* Count EB_AValid signal */
+#define PERF_EB_WDRDY 0x0004 /* Count EB_WDRdy signal */
+#define PERF_EB_RDVAL 0x0008 /* Count EB_RdVal signal */
+#define PERF_VRADDR 0x0010 /* Count valid read address cycles */
+#define PERF_VWADDR 0x0020 /* Count valid write address cycles */
+#define PERF_VWDATA 0x0040 /* Count valid write data cycles */
+
+/*
+ * AHB Error Reporting.
+ */
+#define AR5315_AHB_ERR0 (AR5315_DSLBASE + 0x0050) /* error */
+#define AR5315_AHB_ERR1 (AR5315_DSLBASE + 0x0054) /* haddr */
+#define AR5315_AHB_ERR2 (AR5315_DSLBASE + 0x0058) /* hwdata */
+#define AR5315_AHB_ERR3 (AR5315_DSLBASE + 0x005c) /* hrdata */
+#define AR5315_AHB_ERR4 (AR5315_DSLBASE + 0x0060) /* status */
+
+#define AHB_ERROR_DET 1 /* AHB Error has been detected, */
+ /* write 1 to clear all bits in ERR0 */
+#define AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */
+#define AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */
+
+#define PROCERR_HMAST 0x0000000f
+#define PROCERR_HMAST_DFLT 0
+#define PROCERR_HMAST_WMAC 1
+#define PROCERR_HMAST_ENET 2
+#define PROCERR_HMAST_PCIENDPT 3
+#define PROCERR_HMAST_LOCAL 4
+#define PROCERR_HMAST_CPU 5
+#define PROCERR_HMAST_PCITGT 6
+
+#define PROCERR_HMAST_S 0
+#define PROCERR_HWRITE 0x00000010
+#define PROCERR_HSIZE 0x00000060
+#define PROCERR_HSIZE_S 5
+#define PROCERR_HTRANS 0x00000180
+#define PROCERR_HTRANS_S 7
+#define PROCERR_HBURST 0x00000e00
+#define PROCERR_HBURST_S 9
+
+
+
+/*
+ * Clock Control
+ */
+#define AR5315_PLLC_CTL (AR5315_DSLBASE + 0x0064)
+#define AR5315_PLLV_CTL (AR5315_DSLBASE + 0x0068)
+#define AR5315_CPUCLK (AR5315_DSLBASE + 0x006c)
+#define AR5315_AMBACLK (AR5315_DSLBASE + 0x0070)
+#define AR5315_SYNCCLK (AR5315_DSLBASE + 0x0074)
+#define AR5315_DSL_SLEEP_CTL (AR5315_DSLBASE + 0x0080)
+#define AR5315_DSL_SLEEP_DUR (AR5315_DSLBASE + 0x0084)
+
+/* PLLc Control fields */
+#define PLLC_REF_DIV_M 0x00000003
+#define PLLC_REF_DIV_S 0
+#define PLLC_FDBACK_DIV_M 0x0000007C
+#define PLLC_FDBACK_DIV_S 2
+#define PLLC_ADD_FDBACK_DIV_M 0x00000080
+#define PLLC_ADD_FDBACK_DIV_S 7
+#define PLLC_CLKC_DIV_M 0x0001c000
+#define PLLC_CLKC_DIV_S 14
+#define PLLC_CLKM_DIV_M 0x00700000
+#define PLLC_CLKM_DIV_S 20
+
+/* CPU CLK Control fields */
+#define CPUCLK_CLK_SEL_M 0x00000003
+#define CPUCLK_CLK_SEL_S 0
+#define CPUCLK_CLK_DIV_M 0x0000000c
+#define CPUCLK_CLK_DIV_S 2
+
+/* AMBA CLK Control fields */
+#define AMBACLK_CLK_SEL_M 0x00000003
+#define AMBACLK_CLK_SEL_S 0
+#define AMBACLK_CLK_DIV_M 0x0000000c
+#define AMBACLK_CLK_DIV_S 2
+
+#if defined(COBRA_EMUL)
+#define AR5315_AMBA_CLOCK_RATE 20000000
+#define AR5315_CPU_CLOCK_RATE 40000000
+#else
+#if defined(DEFAULT_PLL)
+#define AR5315_AMBA_CLOCK_RATE 40000000
+#define AR5315_CPU_CLOCK_RATE 40000000
+#else
+#define AR5315_AMBA_CLOCK_RATE 92000000
+#define AR5315_CPU_CLOCK_RATE 184000000
+#endif /* ! DEFAULT_PLL */
+#endif /* ! COBRA_EMUL */
+
+#define AR5315_UART_CLOCK_RATE AR5315_AMBA_CLOCK_RATE
+#define AR5315_SDRAM_CLOCK_RATE AR5315_AMBA_CLOCK_RATE
+
+/*
+ * The UART computes baud rate as:
+ * baud = clock / (16 * divisor)
+ * where divisor is specified as a High Byte (DLM) and a Low Byte (DLL).
+ */
+#define DESIRED_BAUD_RATE 38400
+
+
+#define CLOCKCTL_UART0 0x0010 /* enable UART0 external clock */
+
+
+ /*
+ * Applicable "PCICFG" bits for WLAN(s). Assoc status and LED mode.
+ */
+#define ASSOC_STATUS_M 0x00000003
+#define ASSOC_STATUS_NONE 0
+#define ASSOC_STATUS_PENDING 1
+#define ASSOC_STATUS_ASSOCIATED 2
+#define LED_MODE_M 0x0000001c
+#define LED_BLINK_THRESHOLD_M 0x000000e0
+#define LED_SLOW_BLINK_MODE 0x00000100
+
+/*
+ * GPIO
+ */
+
+#define AR5315_GPIO_DI (AR5315_DSLBASE + 0x0088)
+#define AR5315_GPIO_DO (AR5315_DSLBASE + 0x0090)
+#define AR5315_GPIO_CR (AR5315_DSLBASE + 0x0098)
+#define AR5315_GPIO_INT (AR5315_DSLBASE + 0x00a0)
+
+#define AR5315_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
+#define AR5315_GPIO_CR_O(x) (1 << (x)) /* output */
+#define AR5315_GPIO_CR_I(x) (0 << (x)) /* input */
+
+#define AR5315_GPIO_INT_S(x,Y) ((x) << (8 * (Y))) /* interrupt enable */
+#define AR5315_GPIO_INT_M(Y) ((0x3F) << (8 * (Y))) /* mask for int */
+#define AR5315_GPIO_INT_LVL(x,Y) ((x) << (8 * (Y) + 6)) /* interrupt level */
+#define AR5315_GPIO_INT_LVL_M(Y) ((0x3) << (8 * (Y) + 6)) /* mask for int level */
+
+#define AR5315_RESET_GPIO 5
+#define AR5315_NUM_GPIO 22
+
+
+/*
+ * PCI Clock Control
+ */
+
+#define AR5315_PCICLK (AR5315_DSLBASE + 0x00a4)
+
+#define PCICLK_INPUT_M 0x3
+#define PCICLK_INPUT_S 0
+
+#define PCICLK_PLLC_CLKM 0
+#define PCICLK_PLLC_CLKM1 1
+#define PCICLK_PLLC_CLKC 2
+#define PCICLK_REF_CLK 3
+
+#define PCICLK_DIV_M 0xc
+#define PCICLK_DIV_S 2
+
+#define PCICLK_IN_FREQ 0
+#define PCICLK_IN_FREQ_DIV_6 1
+#define PCICLK_IN_FREQ_DIV_8 2
+#define PCICLK_IN_FREQ_DIV_10 3
+
+/*
+ * Observation Control Register
+ */
+#define AR5315_OCR (AR5315_DSLBASE + 0x00b0)
+#define OCR_GPIO0_IRIN 0x0040
+#define OCR_GPIO1_IROUT 0x0080
+#define OCR_GPIO3_RXCLR 0x0200
+
+/*
+ * General Clock Control
+ */
+
+#define AR5315_MISCCLK (AR5315_DSLBASE + 0x00b4)
+#define MISCCLK_PLLBYPASS_EN 0x00000001
+#define MISCCLK_PROCREFCLK 0x00000002
+
+/*
+ * SDRAM Controller
+ * - No read or write buffers are included.
+ */
+#define AR5315_MEM_CFG (AR5315_SDRAMCTL + 0x00)
+#define AR5315_MEM_CTRL (AR5315_SDRAMCTL + 0x0c)
+#define AR5315_MEM_REF (AR5315_SDRAMCTL + 0x10)
+
+#define SDRAM_DATA_WIDTH_M 0x00006000
+#define SDRAM_DATA_WIDTH_S 13
+
+#define SDRAM_COL_WIDTH_M 0x00001E00
+#define SDRAM_COL_WIDTH_S 9
+
+#define SDRAM_ROW_WIDTH_M 0x000001E0
+#define SDRAM_ROW_WIDTH_S 5
+
+#define SDRAM_BANKADDR_BITS_M 0x00000018
+#define SDRAM_BANKADDR_BITS_S 3
+
+/*
+ * SPI Flash Interface Registers
+ */
+
+#define AR5315_SPI_CTL (AR5315_SPI + 0x00)
+#define AR5315_SPI_OPCODE (AR5315_SPI + 0x04)
+#define AR5315_SPI_DATA (AR5315_SPI + 0x08)
+
+#define SPI_CTL_START 0x00000100
+#define SPI_CTL_BUSY 0x00010000
+#define SPI_CTL_TXCNT_MASK 0x0000000f
+#define SPI_CTL_RXCNT_MASK 0x000000f0
+#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
+#define SPI_CTL_SIZE_MASK 0x00060000
+
+#define SPI_CTL_CLK_SEL_MASK 0x03000000
+#define SPI_OPCODE_MASK 0x000000ff
+
+/*
+ * PCI-MAC Configuration registers
+ */
+#define PCI_MAC_RC (AR5315_PCI + 0x4000)
+#define PCI_MAC_SCR (AR5315_PCI + 0x4004)
+#define PCI_MAC_INTPEND (AR5315_PCI + 0x4008)
+#define PCI_MAC_SFR (AR5315_PCI + 0x400C)
+#define PCI_MAC_PCICFG (AR5315_PCI + 0x4010)
+#define PCI_MAC_SREV (AR5315_PCI + 0x4020)
+
+#define PCI_MAC_RC_MAC 0x00000001
+#define PCI_MAC_RC_BB 0x00000002
+
+#define PCI_MAC_SCR_SLMODE_M 0x00030000
+#define PCI_MAC_SCR_SLMODE_S 16
+#define PCI_MAC_SCR_SLM_FWAKE 0
+#define PCI_MAC_SCR_SLM_FSLEEP 1
+#define PCI_MAC_SCR_SLM_NORMAL 2
+
+#define PCI_MAC_SFR_SLEEP 0x00000001
+
+#define PCI_MAC_PCICFG_SPWR_DN 0x00010000
+
+
+/*
+ * PCI Bus Interface Registers
+ */
+#define AR5315_PCI_1MS_REG (AR5315_PCI + 0x0008)
+#define AR5315_PCI_1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
+
+#define AR5315_PCI_MISC_CONFIG (AR5315_PCI + 0x000c)
+#define AR5315_PCIMISC_TXD_EN 0x00000001 /* Enable TXD for fragments */
+#define AR5315_PCIMISC_CFG_SEL 0x00000002 /* mem or config cycles */
+#define AR5315_PCIMISC_GIG_MASK 0x0000000C /* bits 31-30 for pci req */
+#define AR5315_PCIMISC_RST_MODE 0x00000030
+#define AR5315_PCIRST_INPUT 0x00000000 /* 4:5=0 rst is input */
+#define AR5315_PCIRST_LOW 0x00000010 /* 4:5=1 rst to GND */
+#define AR5315_PCIRST_HIGH 0x00000020 /* 4:5=2 rst to VDD */
+#define AR5315_PCIGRANT_EN 0x00000000 /* 6:7=0 early grant en */
+#define AR5315_PCIGRANT_FRAME 0x00000040 /* 6:7=1 grant waits 4 frame */
+#define AR5315_PCIGRANT_IDLE 0x00000080 /* 6:7=2 grant waits 4 idle */
+#define AR5315_PCIGRANT_GAP 0x00000000 /* 6:7=2 grant waits 4 idle */
+#define AR5315_PCICACHE_DIS 0x00001000 /* PCI external access cache disable */
+
+#define AR5315_PCI_OUT_TSTAMP (AR5315_PCI + 0x0010)
+
+#define AR5315_PCI_UNCACHE_CFG (AR5315_PCI + 0x0014)
+
+#define AR5315_PCI_IN_EN (AR5315_PCI + 0x0100)
+#define AR5315_PCI_IN_EN0 0x01 /* Enable chain 0 */
+#define AR5315_PCI_IN_EN1 0x02 /* Enable chain 1 */
+#define AR5315_PCI_IN_EN2 0x04 /* Enable chain 2 */
+#define AR5315_PCI_IN_EN3 0x08 /* Enable chain 3 */
+
+#define AR5315_PCI_IN_DIS (AR5315_PCI + 0x0104)
+#define AR5315_PCI_IN_DIS0 0x01 /* Disable chain 0 */
+#define AR5315_PCI_IN_DIS1 0x02 /* Disable chain 1 */
+#define AR5315_PCI_IN_DIS2 0x04 /* Disable chain 2 */
+#define AR5315_PCI_IN_DIS3 0x08 /* Disable chain 3 */
+
+#define AR5315_PCI_IN_PTR (AR5315_PCI + 0x0200)
+
+#define AR5315_PCI_OUT_EN (AR5315_PCI + 0x0400)
+#define AR5315_PCI_OUT_EN0 0x01 /* Enable chain 0 */
+
+#define AR5315_PCI_OUT_DIS (AR5315_PCI + 0x0404)
+#define AR5315_PCI_OUT_DIS0 0x01 /* Disable chain 0 */
+
+#define AR5315_PCI_OUT_PTR (AR5315_PCI + 0x0408)
+
+#define AR5315_PCI_INT_STATUS (AR5315_PCI + 0x0500) /* write one to clr */
+#define AR5315_PCI_TXINT 0x00000001 /* Desc In Completed */
+#define AR5315_PCI_TXOK 0x00000002 /* Desc In OK */
+#define AR5315_PCI_TXERR 0x00000004 /* Desc In ERR */
+#define AR5315_PCI_TXEOL 0x00000008 /* Desc In End-of-List */
+#define AR5315_PCI_RXINT 0x00000010 /* Desc Out Completed */
+#define AR5315_PCI_RXOK 0x00000020 /* Desc Out OK */
+#define AR5315_PCI_RXERR 0x00000040 /* Desc Out ERR */
+#define AR5315_PCI_RXEOL 0x00000080 /* Desc Out EOL */
+#define AR5315_PCI_TXOOD 0x00000200 /* Desc In Out-of-Desc */
+#define AR5315_PCI_MASK 0x0000FFFF /* Desc Mask */
+#define AR5315_PCI_EXT_INT 0x02000000
+#define AR5315_PCI_ABORT_INT 0x04000000
+
+#define AR5315_PCI_INT_MASK (AR5315_PCI + 0x0504) /* same as INT_STATUS */
+
+#define AR5315_PCI_INTEN_REG (AR5315_PCI + 0x0508)
+#define AR5315_PCI_INT_DISABLE 0x00 /* disable pci interrupts */
+#define AR5315_PCI_INT_ENABLE 0x01 /* enable pci interrupts */
+
+#define AR5315_PCI_HOST_IN_EN (AR5315_PCI + 0x0800)
+#define AR5315_PCI_HOST_IN_DIS (AR5315_PCI + 0x0804)
+#define AR5315_PCI_HOST_IN_PTR (AR5315_PCI + 0x0810)
+#define AR5315_PCI_HOST_OUT_EN (AR5315_PCI + 0x0900)
+#define AR5315_PCI_HOST_OUT_DIS (AR5315_PCI + 0x0904)
+#define AR5315_PCI_HOST_OUT_PTR (AR5315_PCI + 0x0908)
+
+
+/*
+ * Local Bus Interface Registers
+ */
+#define AR5315_LB_CONFIG (AR5315_LOCAL + 0x0000)
+#define AR5315_LBCONF_OE 0x00000001 /* =1 OE is low-true */
+#define AR5315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */
+#define AR5315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */
+#define AR5315_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */
+#define AR5315_LBCONF_WE 0x00000010 /* =1 Write En is low-true */
+#define AR5315_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */
+#define AR5315_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */
+#define AR5315_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */
+#define AR5315_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */
+#define AR5315_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */
+#define AR5315_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */
+#define AR5315_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */
+#define AR5315_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */
+#define AR5315_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */
+#define AR5315_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */
+#define AR5315_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */
+#define AR5315_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */
+#define AR5315_LBCONF_INT 0x00020000 /* =1 Intr is low true */
+#define AR5315_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */
+#define AR5315_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */
+#define AR5315_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */
+#define AR5315_LBCONF_INT_CTR3 0x000C0000 /* GND drive, Vdd drive */
+#define AR5315_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */
+#define AR5315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */
+#define AR5315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */
+
+#define AR5315_LB_CLKSEL (AR5315_LOCAL + 0x0004)
+#define AR5315_LBCLK_EXT 0x0001 /* use external clk for lb */
+
+#define AR5315_LB_1MS (AR5315_LOCAL + 0x0008)
+#define AR5315_LB1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
+
+#define AR5315_LB_MISCCFG (AR5315_LOCAL + 0x000C)
+#define AR5315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */
+#define AR5315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */
+#define AR5315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */
+#define AR5315_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */
+#define AR5315_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */
+#define AR5315_LBM_TIMEOUT_MASK 0x00FFFF80
+#define AR5315_LBM_TIMEOUT_SHFT 7
+#define AR5315_LBM_PORTMUX 0x07000000
+
+
+#define AR5315_LB_RXTSOFF (AR5315_LOCAL + 0x0010)
+
+#define AR5315_LB_TX_CHAIN_EN (AR5315_LOCAL + 0x0100)
+#define AR5315_LB_TXEN_0 0x01
+#define AR5315_LB_TXEN_1 0x02
+#define AR5315_LB_TXEN_2 0x04
+#define AR5315_LB_TXEN_3 0x08
+
+#define AR5315_LB_TX_CHAIN_DIS (AR5315_LOCAL + 0x0104)
+#define AR5315_LB_TX_DESC_PTR (AR5315_LOCAL + 0x0200)
+
+#define AR5315_LB_RX_CHAIN_EN (AR5315_LOCAL + 0x0400)
+#define AR5315_LB_RXEN 0x01
+
+#define AR5315_LB_RX_CHAIN_DIS (AR5315_LOCAL + 0x0404)
+#define AR5315_LB_RX_DESC_PTR (AR5315_LOCAL + 0x0408)
+
+#define AR5315_LB_INT_STATUS (AR5315_LOCAL + 0x0500)
+#define AR5315_INT_TX_DESC 0x0001
+#define AR5315_INT_TX_OK 0x0002
+#define AR5315_INT_TX_ERR 0x0004
+#define AR5315_INT_TX_EOF 0x0008
+#define AR5315_INT_RX_DESC 0x0010
+#define AR5315_INT_RX_OK 0x0020
+#define AR5315_INT_RX_ERR 0x0040
+#define AR5315_INT_RX_EOF 0x0080
+#define AR5315_INT_TX_TRUNC 0x0100
+#define AR5315_INT_TX_STARVE 0x0200
+#define AR5315_INT_LB_TIMEOUT 0x0400
+#define AR5315_INT_LB_ERR 0x0800
+#define AR5315_INT_MBOX_WR 0x1000
+#define AR5315_INT_MBOX_RD 0x2000
+
+/* Bit definitions for INT MASK are the same as INT_STATUS */
+#define AR5315_LB_INT_MASK (AR5315_LOCAL + 0x0504)
+
+#define AR5315_LB_INT_EN (AR5315_LOCAL + 0x0508)
+#define AR5315_LB_MBOX (AR5315_LOCAL + 0x0600)
+
+
+
+/*
+ * IR Interface Registers
+ */
+#define AR5315_IR_PKTDATA (AR5315_IR + 0x0000)
+
+#define AR5315_IR_PKTLEN (AR5315_IR + 0x07fc) /* 0 - 63 */
+
+#define AR5315_IR_CONTROL (AR5315_IR + 0x0800)
+#define AR5315_IRCTL_TX 0x00000000 /* use as tranmitter */
+#define AR5315_IRCTL_RX 0x00000001 /* use as receiver */
+#define AR5315_IRCTL_SAMPLECLK_MASK 0x00003ffe /* Sample clk divisor mask */
+#define AR5315_IRCTL_SAMPLECLK_SHFT 1
+#define AR5315_IRCTL_OUTPUTCLK_MASK 0x03ffc000 /* Output clk divisor mask */
+#define AR5315_IRCTL_OUTPUTCLK_SHFT 14
+
+#define AR5315_IR_STATUS (AR5315_IR + 0x0804)
+#define AR5315_IRSTS_RX 0x00000001 /* receive in progress */
+#define AR5315_IRSTS_TX 0x00000002 /* transmit in progress */
+
+#define AR5315_IR_CONFIG (AR5315_IR + 0x0808)
+#define AR5315_IRCFG_INVIN 0x00000001 /* invert input polarity */
+#define AR5315_IRCFG_INVOUT 0x00000002 /* invert output polarity */
+#define AR5315_IRCFG_SEQ_START_WIN_SEL 0x00000004 /* 1 => 28, 0 => 7 */
+#define AR5315_IRCFG_SEQ_START_THRESH 0x000000f0 /* */
+#define AR5315_IRCFG_SEQ_END_UNIT_SEL 0x00000100 /* */
+#define AR5315_IRCFG_SEQ_END_UNIT_THRESH 0x00007e00 /* */
+#define AR5315_IRCFG_SEQ_END_WIN_SEL 0x00008000 /* */
+#define AR5315_IRCFG_SEQ_END_WIN_THRESH 0x001f0000 /* */
+#define AR5315_IRCFG_NUM_BACKOFF_WORDS 0x01e00000 /* */
+
+/*
+ * PCI memory constants: Memory area 1 and 2 are the same size -
+ * (twice the PCI_TLB_PAGE_SIZE). The definition of
+ * CPU_TO_PCI_MEM_SIZE is coupled with the TLB setup routine
+ * sysLib.c/sysTlbInit(), in that it assumes that 2 pages of size
+ * PCI_TLB_PAGE_SIZE are set up in the TLB for each PCI memory space.
+ */
+
+#define CPU_TO_PCI_MEM_BASE1 0xE0000000
+#define CPU_TO_PCI_MEM_SIZE1 (2*PCI_TLB_PAGE_SIZE)
+
+
+/* TLB attributes for PCI transactions */
+
+#define PCI_MMU_PAGEMASK 0x00003FFF
+#define MMU_PAGE_UNCACHED 0x00000010
+#define MMU_PAGE_DIRTY 0x00000004
+#define MMU_PAGE_VALID 0x00000002
+#define MMU_PAGE_GLOBAL 0x00000001
+#define PCI_MMU_PAGEATTRIB (MMU_PAGE_UNCACHED|MMU_PAGE_DIRTY|\
+ MMU_PAGE_VALID|MMU_PAGE_GLOBAL)
+#define PCI_MEMORY_SPACE1_VIRT 0xE0000000 /* Used for non-prefet mem */
+#define PCI_MEMORY_SPACE1_PHYS 0x80000000
+#define PCI_TLB_PAGE_SIZE 0x01000000
+#define TLB_HI_MASK 0xFFFFE000
+#define TLB_LO_MASK 0x3FFFFFFF
+#define PAGEMASK_SHIFT 11
+#define TLB_LO_SHIFT 6
+
+#define PCI_MAX_LATENCY 0xFFF /* Max PCI latency */
+
+#define HOST_PCI_DEV_ID 3
+#define HOST_PCI_MBAR0 0x10000000
+#define HOST_PCI_MBAR1 0x20000000
+#define HOST_PCI_MBAR2 0x30000000
+
+#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1
+#define PCI_DEVICE_MEM_SPACE 0x800000
+
+#endif
+
diff --git a/target/linux/atheros-2.6/files/arch/mips/atheros/ar531x.h b/target/linux/atheros-2.6/files/arch/mips/atheros/ar531x.h
new file mode 100644
index 0000000000..208b0101a2
--- /dev/null
+++ b/target/linux/atheros-2.6/files/arch/mips/atheros/ar531x.h
@@ -0,0 +1,106 @@
+#ifndef __AR531X_H
+#define __AR531X_H
+
+#include <ar531x_platform.h>
+#include "ar5312.h"
+#include "ar5315.h"
+
+#define MIPS_CPU_IRQ_BASE 0x00
+#define AR531X_HIGH_PRIO 0x10
+#define AR531X_MISC_IRQ_BASE 0x20
+#define AR531X_GPIO_IRQ_BASE 0x30
+
+/* Software's idea of interrupts handled by "CPU Interrupt Controller" */
+#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0
+#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */
+
+/* Miscellaneous interrupts, which share IP6 */
+#define AR531X_MISC_IRQ_NONE AR531X_MISC_IRQ_BASE+0
+#define AR531X_MISC_IRQ_TIMER AR531X_MISC_IRQ_BASE+1
+#define AR531X_MISC_IRQ_AHB_PROC AR531X_MISC_IRQ_BASE+2
+#define AR531X_MISC_IRQ_AHB_DMA AR531X_MISC_IRQ_BASE+3
+#define AR531X_MISC_IRQ_GPIO AR531X_MISC_IRQ_BASE+4
+#define AR531X_MISC_IRQ_UART0 AR531X_MISC_IRQ_BASE+5
+#define AR531X_MISC_IRQ_UART0_DMA AR531X_MISC_IRQ_BASE+6
+#define AR531X_MISC_IRQ_WATCHDOG AR531X_MISC_IRQ_BASE+7
+#define AR531X_MISC_IRQ_LOCAL AR531X_MISC_IRQ_BASE+8
+#define AR531X_MISC_IRQ_COUNT 9
+
+/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */
+#define AR531X_GPIO_IRQ_NONE AR531X_MISC_IRQ_BASE+0
+#define AR531X_GPIO_IRQ(n) AR531X_MISC_IRQ_BASE+(n)+1
+#define AR531X_GPIO_IRQ_COUNT 22
+
+#define sysRegRead(phys) \
+ (*(volatile u32 *)KSEG1ADDR(phys))
+
+#define sysRegWrite(phys, val) \
+ ((*(volatile u32 *)KSEG1ADDR(phys)) = (val))
+
+/*
+ * This is board-specific data that is stored in a "fixed" location in flash.
+ * It is shared across operating systems, so it should not be changed lightly.
+ * The main reason we need it is in order to extract the ethernet MAC
+ * address(es).
+ */
+struct ar531x_boarddata {
+ u32 magic; /* board data is valid */
+#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */
+ u16 cksum; /* checksum (starting with BD_REV 2) */
+ u16 rev; /* revision of this struct */
+#define BD_REV 4
+ char boardName[64]; /* Name of board */
+ u16 major; /* Board major number */
+ u16 minor; /* Board minor number */
+ u32 config; /* Board configuration */
+#define BD_ENET0 0x00000001 /* ENET0 is stuffed */
+#define BD_ENET1 0x00000002 /* ENET1 is stuffed */
+#define BD_UART1 0x00000004 /* UART1 is stuffed */
+#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */
+#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */
+#define BD_SYSLED 0x00000020 /* System LED stuffed */
+#define BD_EXTUARTCLK 0x00000040 /* External UART clock */
+#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */
+#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */
+#define BD_WLAN0 0x00000200 /* Enable WLAN0 */
+#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */
+#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */
+#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */
+#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */
+#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */
+#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */
+#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */
+#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */
+ u16 resetConfigGpio; /* Reset factory GPIO pin */
+ u16 sysLedGpio; /* System LED GPIO pin */
+
+ u32 cpuFreq; /* CPU core frequency in Hz */
+ u32 sysFreq; /* System frequency in Hz */
+ u32 cntFreq; /* Calculated C0_COUNT frequency */
+
+ u8 wlan0Mac[6];
+ u8 enet0Mac[6];
+ u8 enet1Mac[6];
+
+ u16 pciId; /* Pseudo PCIID for common code */
+ u16 memCap; /* cap bank1 in MB */
+
+ /* version 3 */
+ u8 wlan1Mac[6]; /* (ar5212) */
+};
+
+
+extern char *board_config;
+extern char *radio_config;
+extern void serial_setup(unsigned long mapbase, unsigned int uartclk);
+extern int ar531x_find_config(char *flash_limit);
+
+extern void ar5312_misc_intr_init(int irq_base);
+extern void ar5312_irq_dispatch(void);
+extern void ar5312_plat_setup(void);
+
+extern void ar5315_misc_intr_init(int irq_base);
+extern asmlinkage void ar5315_irq_dispatch(void);
+extern void ar5315_plat_setup(void);
+
+#endif
diff --git a/target/linux/atheros-2.6/files/arch/mips/atheros/board.c b/target/linux/atheros-2.6/files/arch/mips/atheros/board.c
new file mode 100644
index 0000000000..fe94c3ffc1
--- /dev/null
+++ b/target/linux/atheros-2.6/files/arch/mips/atheros/board.c
@@ -0,0 +1,190 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+/*
+ * Platform devices for Atheros SoCs
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include "ar531x.h"
+
+char *board_config, *radio_config;
+
+static u8 *find_board_config(char *flash_limit)
+{
+ char *addr;
+ int found = 0;
+
+ for (addr = (char *) (flash_limit - 0x1000);
+ addr >= (char *) (flash_limit - 0x30000);
+ addr -= 0x1000) {
+
+ if ( *(int *)addr == 0x35333131) {
+ /* config magic found */
+ found = 1;
+ break;
+ }
+ }
+
+ if (!found) {
+ printk("WARNING: No board configuration data found!\n");
+ addr = NULL;
+ }
+
+ return addr;
+}
+
+static u8 *find_radio_config(char *flash_limit, char *board_config)
+{
+ int dataFound;
+ u32 radio_config;
+
+ /*
+ * Now find the start of Radio Configuration data, using heuristics:
+ * Search forward from Board Configuration data by 0x1000 bytes
+ * at a time until we find non-0xffffffff.
+ */
+ dataFound = 0;
+ for (radio_config = (u32) board_config + 0x1000;
+ (radio_config < (u32) flash_limit);
+ radio_config += 0x1000) {
+ if (*(int *)radio_config != 0xffffffff) {
+ dataFound = 1;
+ break;
+ }
+ }
+
+#ifdef CONFIG_ATHEROS_AR5315
+ if (!dataFound) { /* AR2316 relocates radio config to new location */
+ for (radio_config = (u32) board_config + 0xf8;
+ (radio_config < (u32) flash_limit - 0x1000 + 0xf8);
+ radio_config += 0x1000) {
+ if (*(int *)radio_config != 0xffffffff) {
+ dataFound = 1;
+ break;
+ }
+ }
+ }
+#endif
+
+ if (!dataFound) {
+ printk("Could not find Radio Configuration data\n");
+ radio_config = 0;
+ }
+
+ return (u8 *) radio_config;
+}
+
+int __init ar531x_find_config(char *flash_limit)
+{
+ unsigned int rcfg_size;
+ char *bcfg, *rcfg;
+
+ /* Copy the board and radio data to RAM, because with the new
+ * spiflash driver, accessing the mapped memory directly is no
+ * longer safe */
+
+ bcfg = find_board_config(flash_limit);
+ if (!bcfg)
+ return -ENODEV;
+
+ board_config = kmalloc(0x1000, GFP_KERNEL);
+ memcpy(board_config, bcfg, 0x100);
+
+ /* Radio config starts 0x100 bytes after board config, regardless
+ * of what the physical layout on the flash chip looks like */
+
+ rcfg = find_radio_config(flash_limit, bcfg);
+ if (!rcfg)
+ return -ENODEV;
+
+ printk("Radio config found at offset 0x%x\n", rcfg - bcfg);
+ radio_config = board_config + 0x100 + ((rcfg - bcfg) & 0xfff);
+ rcfg_size = 0x1000 - ((rcfg - bcfg) & 0xfff);
+ memcpy(radio_config, rcfg, rcfg_size);
+
+ return 0;
+}
+
+void __init serial_setup(unsigned long mapbase, unsigned int uartclk)
+{
+ struct uart_port s;
+
+ memset(&s, 0, sizeof(s));
+
+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
+ s.iotype = UPIO_MEM;
+ s.irq = AR531X_MISC_IRQ_UART0;
+ s.regshift = 2;
+ s.mapbase = mapbase;
+ s.uartclk = uartclk;
+ s.membase = (void __iomem *)s.mapbase;
+
+ early_serial_setup(&s);
+}
+
+void __init plat_mem_setup(void)
+{
+ switch(mips_machtype) {
+#ifdef CONFIG_ATHEROS_AR5312
+ case MACH_ATHEROS_AR5312:
+ ar5312_plat_setup();
+ break;
+#endif
+#ifdef CONFIG_ATHEROS_AR5315
+ case MACH_ATHEROS_AR5315:
+ ar5315_plat_setup();
+ break;
+#endif
+ }
+
+ /* Disable data watchpoints */
+ write_c0_watchlo0(0);
+}
+
+const char *get_system_type(void)
+{
+ switch (mips_machtype) {
+#ifdef CONFIG_ATHEROS_AR5312
+ case MACH_ATHEROS_AR5312:
+ return "Atheros AR5312\n";
+#endif
+#ifdef CONFIG_ATHEROS_AR5315
+ case MACH_ATHEROS_AR5315:
+ return "Atheros AR5315\n";
+#endif
+ }
+ return "Atheros (unknown)";
+}
+
+void __init plat_timer_setup(struct irqaction *irq)
+{
+ unsigned int count;
+
+ /* Usually irq is timer_irqaction (timer_interrupt) */
+ setup_irq(AR531X_IRQ_CPU_CLOCK, irq);
+
+ /* to generate the first CPU timer interrupt */
+ count = read_c0_count();
+ write_c0_compare(count + 1000);
+}
+
+
diff --git a/target/linux/atheros-2.6/files/arch/mips/atheros/irq.c b/target/linux/atheros-2.6/files/arch/mips/atheros/irq.c
new file mode 100644
index 0000000000..99d960b417
--- /dev/null
+++ b/target/linux/atheros-2.6/files/arch/mips/atheros/irq.c
@@ -0,0 +1,98 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+/*
+ * Interrupt support for AR531X WiSOC.
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/pm.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
+#include <linux/irq.h>
+#include <asm/bootinfo.h>
+#include <asm/mipsregs.h>
+#include <asm/irq_cpu.h>
+#include "ar531x.h"
+
+
+/* ARGSUSED */
+irqreturn_t
+spurious_irq_handler(int cpl, void *dev_id)
+{
+ /*
+ printk("spurious_irq_handler: %d cause=0x%8.8x status=0x%8.8x\n",
+ cpl, cause_intrs, status_intrs);
+ */
+ return IRQ_NONE;
+}
+
+/* ARGSUSED */
+irqreturn_t
+spurious_misc_handler(int cpl, void *dev_id)
+{
+ /*
+ printk("spurious_misc_handler: 0x%x isr=0x%8.8x imr=0x%8.8x\n",
+ cpl, ar531x_isr, ar531x_imr);
+ */
+ return IRQ_NONE;
+}
+
+static struct irqaction spurious_irq = {
+ .handler = spurious_irq_handler,
+ .flags = SA_INTERRUPT,
+ .name = "spurious_irq",
+};
+
+static struct irqaction spurious_misc = {
+ .handler = spurious_misc_handler,
+ .flags = SA_INTERRUPT,
+ .name = "spurious_misc",
+};
+
+asmlinkage void plat_irq_dispatch(void)
+{
+#ifdef CONFIG_ATHEROS_AR5312
+ if (mips_machtype == MACH_ATHEROS_AR5312)
+ ar5312_irq_dispatch();
+#endif
+#ifdef CONFIG_ATHEROS_AR5315
+ if (mips_machtype == MACH_ATHEROS_AR5315)
+ ar5315_irq_dispatch();
+#endif
+}
+
+void __init arch_init_irq(void)
+{
+ clear_c0_status(ST0_IM);
+ mips_cpu_irq_init(0);
+
+ /* Initialize interrupt controllers */
+#ifdef CONFIG_ATHEROS_AR5312
+ if (mips_machtype == MACH_ATHEROS_AR5312)
+ ar5312_misc_intr_init(AR531X_MISC_IRQ_BASE);
+#endif
+#ifdef CONFIG_ATHEROS_AR5315
+ if (mips_machtype == MACH_ATHEROS_AR5315)
+ ar5315_misc_intr_init(AR531X_MISC_IRQ_BASE);
+#endif
+
+ /* Default "spurious interrupt" handlers */
+ setup_irq(AR531X_IRQ_NONE, &spurious_irq);
+ setup_irq(AR531X_MISC_IRQ_NONE, &spurious_misc);
+}
diff --git a/target/linux/atheros-2.6/files/arch/mips/atheros/prom.c b/target/linux/atheros-2.6/files/arch/mips/atheros/prom.c
new file mode 100644
index 0000000000..6dfa13c77d
--- /dev/null
+++ b/target/linux/atheros-2.6/files/arch/mips/atheros/prom.c
@@ -0,0 +1,67 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright MontaVista Software Inc
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+/*
+ * Prom setup file for ar531x
+ */
+
+#include <linux/init.h>
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+#include "ar531x.h"
+
+void __init prom_init(void)
+{
+ u32 memsize, memcfg;
+
+ mips_machgroup = MACH_GROUP_ATHEROS;
+ mips_machtype = -1;
+
+ /*
+ * Atheros CPUs before the AR2315 are using MIPS 4Kc core, later designs are
+ * using MIPS 4KEc R2 core. This makes it easy to determine the board at runtime.
+ */
+
+ if (current_cpu_data.cputype == CPU_4KEC) {
+ mips_machtype = MACH_ATHEROS_AR5315;
+
+ memcfg = sysRegRead(AR5315_MEM_CFG);
+ memsize = 1 + ((memcfg & SDRAM_DATA_WIDTH_M) >> SDRAM_DATA_WIDTH_S);
+ memsize <<= 1 + ((memcfg & SDRAM_COL_WIDTH_M) >> SDRAM_COL_WIDTH_S);
+ memsize <<= 1 + ((memcfg & SDRAM_ROW_WIDTH_M) >> SDRAM_ROW_WIDTH_S);
+ memsize <<= 3;
+ } else {
+ int bank0AC, bank1AC;
+
+ mips_machtype = MACH_ATHEROS_AR5312;
+
+ memcfg = sysRegRead(AR531X_MEM_CFG1);
+ bank0AC = (memcfg & MEM_CFG1_AC0) >> MEM_CFG1_AC0_S;
+ bank1AC = (memcfg & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S;
+ memsize = (bank0AC ? (1 << (bank0AC+1)) : 0)
+ + (bank1AC ? (1 << (bank1AC+1)) : 0);
+ memsize <<= 20;
+ }
+
+ add_memory_region(0, memsize, BOOT_MEM_RAM);
+ strcpy(arcs_cmdline, "console=ttyS0,9600 rootfstype=squashfs,jffs2");
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
diff --git a/target/linux/atheros-2.6/files/drivers/mtd/devices/spiflash.c b/target/linux/atheros-2.6/files/drivers/mtd/devices/spiflash.c
new file mode 100644
index 0000000000..6e6734d434
--- /dev/null
+++ b/target/linux/atheros-2.6/files/drivers/mtd/devices/spiflash.c
@@ -0,0 +1,596 @@
+
+/*
+ * MTD driver for the SPI Flash Memory support.
+ *
+ * Copyright (c) 2005-2006 Atheros Communications Inc.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/*===========================================================================
+** !!!! VERY IMPORTANT NOTICE !!!! FLASH DATA STORED IN LITTLE ENDIAN FORMAT
+**
+** This module contains the Serial Flash access routines for the Atheros SOC.
+** The Atheros SOC integrates a SPI flash controller that is used to access
+** serial flash parts. The SPI flash controller executes in "Little Endian"
+** mode. THEREFORE, all WRITES and READS from the MIPS CPU must be
+** BYTESWAPPED! The SPI Flash controller hardware by default performs READ
+** ONLY byteswapping when accessed via the SPI Flash Alias memory region
+** (Physical Address 0x0800_0000 - 0x0fff_ffff). The data stored in the
+** flash sectors is stored in "Little Endian" format.
+**
+** The spiflash_write() routine performs byteswapping on all write
+** operations.
+**===========================================================================*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/squashfs_fs.h>
+#include <linux/root_dev.h>
+#include <asm/delay.h>
+#include <asm/io.h>
+#include "spiflash.h"
+
+/* debugging */
+/* #define SPIFLASH_DEBUG */
+
+#ifndef __BIG_ENDIAN
+#error This driver currently only works with big endian CPU.
+#endif
+
+#define MAX_PARTS 32
+
+static char module_name[] = "spiflash";
+
+#define MIN(a,b) ((a) < (b) ? (a) : (b))
+#define FALSE 0
+#define TRUE 1
+
+#define ROOTFS_NAME "rootfs"
+
+static __u32 spiflash_regread32(int reg);
+static void spiflash_regwrite32(int reg, __u32 data);
+static __u32 spiflash_sendcmd (int op);
+
+int __init spiflash_init (void);
+void __exit spiflash_exit (void);
+static int spiflash_probe_chip (void);
+static int spiflash_erase (struct mtd_info *mtd,struct erase_info *instr);
+static int spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf);
+static int spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf);
+
+/* Flash configuration table */
+struct flashconfig {
+ __u32 byte_cnt;
+ __u32 sector_cnt;
+ __u32 sector_size;
+ __u32 cs_addrmask;
+} flashconfig_tbl[MAX_FLASH] =
+ {
+ { 0, 0, 0, 0},
+ { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, STM_1MB_SECTOR_SIZE, 0x0},
+ { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, STM_2MB_SECTOR_SIZE, 0x0},
+ { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, STM_4MB_SECTOR_SIZE, 0x0},
+ { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT, STM_8MB_SECTOR_SIZE, 0x0}
+ };
+
+/* Mapping of generic opcodes to STM serial flash opcodes */
+struct opcodes {
+ __u16 code;
+ __s8 tx_cnt;
+ __s8 rx_cnt;
+} stm_opcodes[] = {
+ {STM_OP_WR_ENABLE, 1, 0},
+ {STM_OP_WR_DISABLE, 1, 0},
+ {STM_OP_RD_STATUS, 1, 1},
+ {STM_OP_WR_STATUS, 1, 0},
+ {STM_OP_RD_DATA, 4, 4},
+ {STM_OP_FAST_RD_DATA, 1, 0},
+ {STM_OP_PAGE_PGRM, 8, 0},
+ {STM_OP_SECTOR_ERASE, 4, 0},
+ {STM_OP_BULK_ERASE, 1, 0},
+ {STM_OP_DEEP_PWRDOWN, 1, 0},
+ {STM_OP_RD_SIG, 4, 1}
+};
+
+/* Driver private data structure */
+struct spiflash_data {
+ struct mtd_info *mtd;
+ struct mtd_partition *parsed_parts; /* parsed partitions */
+ void *spiflash_readaddr; /* memory mapped data for read */
+ void *spiflash_mmraddr; /* memory mapped register space */
+ spinlock_t mutex;
+};
+
+static struct spiflash_data *spidata;
+
+extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts);
+
+/***************************************************************************************************/
+
+static __u32
+spiflash_regread32(int reg)
+{
+ volatile __u32 *data = (__u32 *)(spidata->spiflash_mmraddr + reg);
+
+ return (*data);
+}
+
+static void
+spiflash_regwrite32(int reg, __u32 data)
+{
+ volatile __u32 *addr = (__u32 *)(spidata->spiflash_mmraddr + reg);
+
+ *addr = data;
+ return;
+}
+
+static __u32
+spiflash_sendcmd (int op)
+{
+ __u32 reg;
+ __u32 mask;
+ struct opcodes *ptr_opcode;
+
+ ptr_opcode = &stm_opcodes[op];
+
+ do {
+ reg = spiflash_regread32(SPI_FLASH_CTL);
+ } while (reg & SPI_CTL_BUSY);
+
+ spiflash_regwrite32(SPI_FLASH_OPCODE, ptr_opcode->code);
+
+ reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | ptr_opcode->tx_cnt |
+ (ptr_opcode->rx_cnt << 4) | SPI_CTL_START;
+
+ spiflash_regwrite32(SPI_FLASH_CTL, reg);
+
+ if (ptr_opcode->rx_cnt > 0) {
+ do {
+ reg = spiflash_regread32(SPI_FLASH_CTL);
+ } while (reg & SPI_CTL_BUSY);
+
+ reg = (__u32) spiflash_regread32(SPI_FLASH_DATA);
+
+ switch (ptr_opcode->rx_cnt) {
+ case 1:
+ mask = 0x000000ff;
+ break;
+ case 2:
+ mask = 0x0000ffff;
+ break;
+ case 3:
+ mask = 0x00ffffff;
+ break;
+ default:
+ mask = 0xffffffff;
+ break;
+ }
+
+ reg &= mask;
+ }
+ else {
+ reg = 0;
+ }
+
+ return reg;
+}
+
+/* Probe SPI flash device
+ * Function returns 0 for failure.
+ * and flashconfig_tbl array index for success.
+ */
+static int
+spiflash_probe_chip (void)
+{
+ __u32 sig;
+ int flash_size;
+
+ /* Read the signature on the flash device */
+ sig = spiflash_sendcmd(SPI_RD_SIG);
+
+ switch (sig) {
+ case STM_8MBIT_SIGNATURE:
+ flash_size = FLASH_1MB;
+ break;
+ case STM_16MBIT_SIGNATURE:
+ flash_size = FLASH_2MB;
+ break;
+ case STM_32MBIT_SIGNATURE:
+ flash_size = FLASH_4MB;
+ break;
+ case STM_64MBIT_SIGNATURE:
+ flash_size = FLASH_8MB;
+ break;
+ default:
+ printk (KERN_WARNING "%s: Read of flash device signature failed!\n", module_name);
+ return (0);
+ }
+
+ return (flash_size);
+}
+
+
+static int
+spiflash_erase (struct mtd_info *mtd,struct erase_info *instr)
+{
+ struct opcodes *ptr_opcode;
+ __u32 temp, reg;
+ int finished = FALSE;
+
+#ifdef SPIFLASH_DEBUG
+ printk (KERN_DEBUG "%s(addr = 0x%.8x, len = %d)\n",__FUNCTION__,instr->addr,instr->len);
+#endif
+
+ /* sanity checks */
+ if (instr->addr + instr->len > mtd->size) return (-EINVAL);
+
+ ptr_opcode = &stm_opcodes[SPI_SECTOR_ERASE];
+
+ temp = ((__u32)instr->addr << 8) | (__u32)(ptr_opcode->code);
+ spin_lock(&spidata->mutex);
+ spiflash_sendcmd(SPI_WRITE_ENABLE);
+ do {
+ schedule();
+ reg = spiflash_regread32(SPI_FLASH_CTL);
+ } while (reg & SPI_CTL_BUSY);
+
+ spiflash_regwrite32(SPI_FLASH_OPCODE, temp);
+
+ reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | ptr_opcode->tx_cnt | SPI_CTL_START;
+ spiflash_regwrite32(SPI_FLASH_CTL, reg);
+
+ do {
+ schedule();
+ reg = spiflash_sendcmd(SPI_RD_STATUS);
+ if (!(reg & SPI_STATUS_WIP)) {
+ finished = TRUE;
+ }
+ } while (!finished);
+ spin_unlock(&spidata->mutex);
+
+ instr->state = MTD_ERASE_DONE;
+ if (instr->callback) instr->callback (instr);
+
+#ifdef SPIFLASH_DEBUG
+ printk (KERN_DEBUG "%s return\n",__FUNCTION__);
+#endif
+ return (0);
+}
+
+static int
+spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf)
+{
+ u_char *read_addr;
+
+#ifdef SPIFLASH_DEBUG
+ printk (KERN_DEBUG "%s(from = 0x%.8x, len = %d)\n",__FUNCTION__,(__u32) from,(int)len);
+#endif
+
+ /* sanity checks */
+ if (!len) return (0);
+ if (from + len > mtd->size) return (-EINVAL);
+
+
+ /* we always read len bytes */
+ *retlen = len;
+
+ read_addr = (u_char *)(spidata->spiflash_readaddr + from);
+ spin_lock(&spidata->mutex);
+ memcpy(buf, read_addr, len);
+ spin_unlock(&spidata->mutex);
+
+ return (0);
+}
+
+static int
+spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf)
+{
+ int done = FALSE, page_offset, bytes_left, finished;
+ __u32 xact_len, spi_data = 0, opcode, reg;
+
+#ifdef SPIFLASH_DEBUG
+ printk (KERN_DEBUG "%s(to = 0x%.8x, len = %d)\n",__FUNCTION__,(__u32) to,len);
+#endif
+
+ *retlen = 0;
+
+ /* sanity checks */
+ if (!len) return (0);
+ if (to + len > mtd->size) return (-EINVAL);
+
+ opcode = stm_opcodes[SPI_PAGE_PROGRAM].code;
+ bytes_left = len;
+
+ while (done == FALSE) {
+ xact_len = MIN(bytes_left, sizeof(__u32));
+
+ /* 32-bit writes cannot span across a page boundary
+ * (256 bytes). This types of writes require two page
+ * program operations to handle it correctly. The STM part
+ * will write the overflow data to the beginning of the
+ * current page as opposed to the subsequent page.
+ */
+ page_offset = (to & (STM_PAGE_SIZE - 1)) + xact_len;
+
+ if (page_offset > STM_PAGE_SIZE) {
+ xact_len -= (page_offset - STM_PAGE_SIZE);
+ }
+
+ spin_lock(&spidata->mutex);
+ spiflash_sendcmd(SPI_WRITE_ENABLE);
+
+ do {
+ schedule();
+ reg = spiflash_regread32(SPI_FLASH_CTL);
+ } while (reg & SPI_CTL_BUSY);
+
+ switch (xact_len) {
+ case 1:
+ spi_data = (u32) ((u8) *buf);
+ break;
+ case 2:
+ spi_data = (buf[1] << 8) | buf[0];
+ break;
+ case 3:
+ spi_data = (buf[2] << 16) | (buf[1] << 8) | buf[0];
+ break;
+ case 4:
+ spi_data = (buf[3] << 24) | (buf[2] << 16) |
+ (buf[1] << 8) | buf[0];
+ break;
+ default:
+ printk("spiflash_write: default case\n");
+ break;
+ }
+
+ spiflash_regwrite32(SPI_FLASH_DATA, spi_data);
+ opcode = (opcode & SPI_OPCODE_MASK) | ((__u32)to << 8);
+ spiflash_regwrite32(SPI_FLASH_OPCODE, opcode);
+
+ reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | (xact_len + 4) | SPI_CTL_START;
+ spiflash_regwrite32(SPI_FLASH_CTL, reg);
+ finished = FALSE;
+
+ do {
+ schedule();
+ reg = spiflash_sendcmd(SPI_RD_STATUS);
+ if (!(reg & SPI_STATUS_WIP)) {
+ finished = TRUE;
+ }
+ } while (!finished);
+ spin_unlock(&spidata->mutex);
+
+ bytes_left -= xact_len;
+ to += xact_len;
+ buf += xact_len;
+
+ *retlen += xact_len;
+
+ if (bytes_left == 0) {
+ done = TRUE;
+ }
+ }
+
+ return (0);
+}
+
+
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
+#endif
+
+
+static int spiflash_probe(struct platform_device *pdev)
+{
+ int result = -1, i, j;
+ u32 len;
+ int index, num_parts;
+ struct mtd_info *mtd;
+ struct mtd_partition *mtd_parts;
+ char *buf;
+ struct mtd_partition *part;
+ struct squashfs_super_block *sb;
+ u32 config_start;
+
+ spidata->spiflash_mmraddr = ioremap_nocache(SPI_FLASH_MMR, SPI_FLASH_MMR_SIZE);
+
+ if (!spidata->spiflash_mmraddr) {
+ printk (KERN_WARNING "%s: Failed to map flash device\n", module_name);
+ kfree(spidata);
+ spidata = NULL;
+ }
+
+ mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
+ if (!mtd) {
+ kfree(spidata);
+ return (-ENXIO);
+ }
+
+ printk ("MTD driver for SPI flash.\n");
+ printk ("%s: Probing for Serial flash ...\n", module_name);
+ if (!(index = spiflash_probe_chip())) {
+ printk (KERN_WARNING "%s: Found no serial flash device\n", module_name);
+ kfree(mtd);
+ kfree(spidata);
+ return (-ENXIO);
+ }
+
+ printk ("%s: Found SPI serial Flash.\n", module_name);
+
+ spidata->spiflash_readaddr = ioremap_nocache(SPI_FLASH_READ, flashconfig_tbl[index].byte_cnt);
+ if (!spidata->spiflash_readaddr) {
+ printk (KERN_WARNING "%s: Failed to map flash device\n", module_name);
+ kfree(mtd);
+ kfree(spidata);
+ return (-ENXIO);
+ }
+
+ mtd->name = module_name;
+ mtd->type = MTD_NORFLASH;
+ mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE);
+ mtd->size = flashconfig_tbl[index].byte_cnt;
+ mtd->erasesize = flashconfig_tbl[index].sector_size;
+ mtd->writesize = 1;
+ mtd->numeraseregions = 0;
+ mtd->eraseregions = NULL;
+ mtd->erase = spiflash_erase;
+ mtd->read = spiflash_read;
+ mtd->write = spiflash_write;
+ mtd->owner = THIS_MODULE;
+
+#ifdef SPIFLASH_DEBUG
+ printk (KERN_DEBUG
+ "mtd->name = %s\n"
+ "mtd->size = 0x%.8x (%uM)\n"
+ "mtd->erasesize = 0x%.8x (%uK)\n"
+ "mtd->numeraseregions = %d\n",
+ mtd->name,
+ mtd->size, mtd->size / (1024*1024),
+ mtd->erasesize, mtd->erasesize / 1024,
+ mtd->numeraseregions);
+
+ if (mtd->numeraseregions) {
+ for (result = 0; result < mtd->numeraseregions; result++) {
+ printk (KERN_DEBUG
+ "\n\n"
+ "mtd->eraseregions[%d].offset = 0x%.8x\n"
+ "mtd->eraseregions[%d].erasesize = 0x%.8x (%uK)\n"
+ "mtd->eraseregions[%d].numblocks = %d\n",
+ result,mtd->eraseregions[result].offset,
+ result,mtd->eraseregions[result].erasesize,mtd->eraseregions[result].erasesize / 1024,
+ result,mtd->eraseregions[result].numblocks);
+ }
+ }
+#endif
+
+ /* parse redboot partitions */
+ num_parts = parse_mtd_partitions(mtd, part_probe_types, &spidata->parsed_parts, 0);
+
+ mtd_parts = kzalloc(sizeof(struct mtd_partition) * MAX_PARTS, GFP_KERNEL);
+ buf = kmalloc(mtd->erasesize, GFP_KERNEL);
+ sb = (struct squashfs_super_block *) buf;
+ for (i = j = 0; i < num_parts; i++, j++) {
+ part = &mtd_parts[j];
+ memcpy(part, &spidata->parsed_parts[i], sizeof(struct mtd_partition));
+
+ if (!strcmp(part->name, ROOTFS_NAME)) {
+ /* create the root device */
+ ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, i);
+
+ part->size -= mtd->erasesize;
+ config_start = part->offset + part->size;
+
+ while ((mtd->read(mtd, part->offset, mtd->erasesize, &len, buf) == 0) &&
+ (len == mtd->erasesize) &&
+ (*((u32 *) buf) == SQUASHFS_MAGIC) &&
+ (sb->bytes_used > 0)) {
+
+ /* this is squashfs, allocate another partition starting from the end of filesystem data */
+ memcpy(&mtd_parts[j + 1], part, sizeof(struct mtd_partition));
+
+ len = (u32) sb->bytes_used;
+ len += (part->offset & 0x000fffff);
+ len += (mtd->erasesize - 1);
+ len &= ~(mtd->erasesize - 1);
+ len -= (part->offset & 0x000fffff);
+
+ if (len + mtd->erasesize > part->size)
+ break;
+
+ part = &mtd_parts[++j];
+
+ part->offset += len;
+ part->size -= len;
+
+ part->name = kmalloc(10, GFP_KERNEL);
+ sprintf(part->name, "rootfs%d", j - i);
+ }
+ }
+ if (!strcmp(part->name, "RedBoot config")) {
+ /* add anoterh partition for the board config data */
+ memcpy(&mtd_parts[j + 1], part, sizeof(struct mtd_partition));
+ j++;
+ part = &mtd_parts[j];
+ part->offset += part->size;
+ part->size = mtd->erasesize;
+
+ part->name = kmalloc(16, GFP_KERNEL);
+ sprintf(part->name, "board_config");
+ }
+ }
+ num_parts += j - i;
+ kfree(buf);
+
+#ifdef SPIFLASH_DEBUG
+ printk (KERN_DEBUG "Found %d redboot partitions\n", num_parts);
+#endif
+ if (num_parts) {
+ result = add_mtd_partitions(mtd, mtd_parts, num_parts);
+ } else {
+#ifdef SPIFLASH_DEBUG
+ printk (KERN_DEBUG "Did not find any redboot partitions\n");
+#endif
+ kfree(mtd);
+ kfree(spidata);
+ return (-ENXIO);
+ }
+
+ spidata->mtd = mtd;
+
+ return (result);
+}
+
+static int spiflash_remove (struct platform_device *pdev)
+{
+ del_mtd_partitions (spidata->mtd);
+ kfree(spidata->mtd);
+
+ return 0;
+}
+
+struct platform_driver spiflash_driver = {
+ .driver.name = "spiflash",
+ .probe = spiflash_probe,
+ .remove = spiflash_remove,
+};
+
+int __init
+spiflash_init (void)
+{
+ spidata = kmalloc(sizeof(struct spiflash_data), GFP_KERNEL);
+ if (!spidata)
+ return (-ENXIO);
+
+ spin_lock_init(&spidata->mutex);
+ platform_driver_register(&spiflash_driver);
+
+ return 0;
+}
+
+void __exit
+spiflash_exit (void)
+{
+ kfree(spidata);
+}
+
+module_init (spiflash_init);
+module_exit (spiflash_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Atheros Communications Inc");
+MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros SOC");
+
diff --git a/target/linux/atheros-2.6/files/drivers/mtd/devices/spiflash.h b/target/linux/atheros-2.6/files/drivers/mtd/devices/spiflash.h
new file mode 100644
index 0000000000..e543e040fd
--- /dev/null
+++ b/target/linux/atheros-2.6/files/drivers/mtd/devices/spiflash.h
@@ -0,0 +1,124 @@
+/*
+ * SPI Flash Memory support header file.
+ *
+ * $Id: //depot/sw/releases/linuxsrc/src/kernels/mips-linux-2.4.25/drivers/mtd/devices/spiflash.h#3 $
+ *
+ *
+ * Copyright (c) 2005, Atheros Communications Inc.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#define FLASH_1MB 1
+#define FLASH_2MB 2
+#define FLASH_4MB 3
+#define FLASH_8MB 4
+#define MAX_FLASH 5
+
+#define STM_PAGE_SIZE 256
+
+#define SPI_WRITE_ENABLE 0
+#define SPI_WRITE_DISABLE 1
+#define SPI_RD_STATUS 2
+#define SPI_WR_STATUS 3
+#define SPI_RD_DATA 4
+#define SPI_FAST_RD_DATA 5
+#define SPI_PAGE_PROGRAM 6
+#define SPI_SECTOR_ERASE 7
+#define SPI_BULK_ERASE 8
+#define SPI_DEEP_PWRDOWN 9
+#define SPI_RD_SIG 10
+#define SPI_MAX_OPCODES 11
+
+#define SFI_WRITE_BUFFER_SIZE 4
+#define SFI_FLASH_ADDR_MASK 0x00ffffff
+
+#define STM_8MBIT_SIGNATURE 0x13
+#define STM_M25P80_BYTE_COUNT 1048576
+#define STM_M25P80_SECTOR_COUNT 16
+#define STM_M25P80_SECTOR_SIZE 0x10000
+
+#define STM_16MBIT_SIGNATURE 0x14
+#define STM_M25P16_BYTE_COUNT 2097152
+#define STM_M25P16_SECTOR_COUNT 32
+#define STM_M25P16_SECTOR_SIZE 0x10000
+
+#define STM_32MBIT_SIGNATURE 0x15
+#define STM_M25P32_BYTE_COUNT 4194304
+#define STM_M25P32_SECTOR_COUNT 64
+#define STM_M25P32_SECTOR_SIZE 0x10000
+
+#define STM_64MBIT_SIGNATURE 0x16
+#define STM_M25P64_BYTE_COUNT 8388608
+#define STM_M25P64_SECTOR_COUNT 128
+#define STM_M25P64_SECTOR_SIZE 0x10000
+
+#define STM_1MB_BYTE_COUNT STM_M25P80_BYTE_COUNT
+#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT
+#define STM_1MB_SECTOR_SIZE STM_M25P80_SECTOR_SIZE
+#define STM_2MB_BYTE_COUNT STM_M25P16_BYTE_COUNT
+#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT
+#define STM_2MB_SECTOR_SIZE STM_M25P16_SECTOR_SIZE
+#define STM_4MB_BYTE_COUNT STM_M25P32_BYTE_COUNT
+#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT
+#define STM_4MB_SECTOR_SIZE STM_M25P32_SECTOR_SIZE
+#define STM_8MB_BYTE_COUNT STM_M25P64_BYTE_COUNT
+#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT
+#define STM_8MB_SECTOR_SIZE STM_M25P64_SECTOR_SIZE
+
+/*
+ * ST Microelectronics Opcodes for Serial Flash
+ */
+
+#define STM_OP_WR_ENABLE 0x06 /* Write Enable */
+#define STM_OP_WR_DISABLE 0x04 /* Write Disable */
+#define STM_OP_RD_STATUS 0x05 /* Read Status */
+#define STM_OP_WR_STATUS 0x01 /* Write Status */
+#define STM_OP_RD_DATA 0x03 /* Read Data */
+#define STM_OP_FAST_RD_DATA 0x0b /* Fast Read Data */
+#define STM_OP_PAGE_PGRM 0x02 /* Page Program */
+#define STM_OP_SECTOR_ERASE 0xd8 /* Sector Erase */
+#define STM_OP_BULK_ERASE 0xc7 /* Bulk Erase */
+#define STM_OP_DEEP_PWRDOWN 0xb9 /* Deep Power-Down Mode */
+#define STM_OP_RD_SIG 0xab /* Read Electronic Signature */
+
+#define STM_STATUS_WIP 0x01 /* Write-In-Progress */
+#define STM_STATUS_WEL 0x02 /* Write Enable Latch */
+#define STM_STATUS_BP0 0x04 /* Block Protect 0 */
+#define STM_STATUS_BP1 0x08 /* Block Protect 1 */
+#define STM_STATUS_BP2 0x10 /* Block Protect 2 */
+#define STM_STATUS_SRWD 0x80 /* Status Register Write Disable */
+
+/*
+ * SPI Flash Interface Registers
+ */
+#define AR531XPLUS_SPI_READ 0x08000000
+#define AR531XPLUS_SPI_MMR 0x11300000
+#define AR531XPLUS_SPI_MMR_SIZE 12
+
+#define AR531XPLUS_SPI_CTL 0x00
+#define AR531XPLUS_SPI_OPCODE 0x04
+#define AR531XPLUS_SPI_DATA 0x08
+
+#define SPI_FLASH_READ AR531XPLUS_SPI_READ
+#define SPI_FLASH_MMR AR531XPLUS_SPI_MMR
+#define SPI_FLASH_MMR_SIZE AR531XPLUS_SPI_MMR_SIZE
+#define SPI_FLASH_CTL AR531XPLUS_SPI_CTL
+#define SPI_FLASH_OPCODE AR531XPLUS_SPI_OPCODE
+#define SPI_FLASH_DATA AR531XPLUS_SPI_DATA
+
+#define SPI_CTL_START 0x00000100
+#define SPI_CTL_BUSY 0x00010000
+#define SPI_CTL_TXCNT_MASK 0x0000000f
+#define SPI_CTL_RXCNT_MASK 0x000000f0
+#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
+#define SPI_CTL_SIZE_MASK 0x00060000
+
+#define SPI_CTL_CLK_SEL_MASK 0x03000000
+#define SPI_OPCODE_MASK 0x000000ff
+
+#define SPI_STATUS_WIP STM_STATUS_WIP
diff --git a/target/linux/atheros-2.6/files/drivers/net/ar2313/Makefile b/target/linux/atheros-2.6/files/drivers/net/ar2313/Makefile
new file mode 100644
index 0000000000..9eb63e46b6
--- /dev/null
+++ b/target/linux/atheros-2.6/files/drivers/net/ar2313/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the AR2313 ethernet driver
+#
+
+obj-$(CONFIG_AR2313) += ar2313.o
diff --git a/target/linux/atheros-2.6/files/drivers/net/ar2313/ar2313.c b/target/linux/atheros-2.6/files/drivers/net/ar2313/ar2313.c
new file mode 100644
index 0000000000..82e9e94d5c
--- /dev/null
+++ b/target/linux/atheros-2.6/files/drivers/net/ar2313/ar2313.c
@@ -0,0 +1,1545 @@
+/*
+ * ar2313.c: Linux driver for the Atheros AR231z Ethernet device.
+ *
+ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ *
+ * Thanks to Atheros for providing hardware and documentation
+ * enabling me to write this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Additional credits:
+ * This code is taken from John Taylor's Sibyte driver and then
+ * modified for the AR2313.
+ */
+
+#include <linux/autoconf.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/highmem.h>
+#include <linux/sockios.h>
+#include <linux/pkt_sched.h>
+#include <linux/compile.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/ctype.h>
+#include <linux/platform_device.h>
+
+#include <net/sock.h>
+#include <net/ip.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+#include <asm/bootinfo.h>
+
+#include <ar531x_platform.h>
+
+#undef INDEX_DEBUG
+#define DEBUG 0
+#define DEBUG_TX 0
+#define DEBUG_RX 0
+#define DEBUG_INT 0
+#define DEBUG_MC 0
+#define DEBUG_ERR 1
+
+#ifndef min
+#define min(a,b) (((a)<(b))?(a):(b))
+#endif
+
+#ifndef SMP_CACHE_BYTES
+#define SMP_CACHE_BYTES L1_CACHE_BYTES
+#endif
+
+#ifndef SET_MODULE_OWNER
+#define SET_MODULE_OWNER(dev) {do{} while(0);}
+#define AR2313_MOD_INC_USE_COUNT MOD_INC_USE_COUNT
+#define AR2313_MOD_DEC_USE_COUNT MOD_DEC_USE_COUNT
+#else
+#define AR2313_MOD_INC_USE_COUNT {do{} while(0);}
+#define AR2313_MOD_DEC_USE_COUNT {do{} while(0);}
+#endif
+
+#define PHYSADDR(a) ((_ACAST32_ (a)) & 0x1fffffff)
+
+static char ifname[5] = "bond";
+
+module_param_string(ifname, ifname, 5, 0);
+
+#define AR2313_MBOX_SET_BIT 0x8
+
+#define BOARD_IDX_STATIC 0
+#define BOARD_IDX_OVERFLOW -1
+
+#include "ar2313_msg.h"
+#include "platform.h"
+#include "dma.h"
+#include "ar2313.h"
+
+/*
+ * New interrupt handler strategy:
+ *
+ * An old interrupt handler worked using the traditional method of
+ * replacing an skbuff with a new one when a packet arrives. However
+ * the rx rings do not need to contain a static number of buffer
+ * descriptors, thus it makes sense to move the memory allocation out
+ * of the main interrupt handler and do it in a bottom half handler
+ * and only allocate new buffers when the number of buffers in the
+ * ring is below a certain threshold. In order to avoid starving the
+ * NIC under heavy load it is however necessary to force allocation
+ * when hitting a minimum threshold. The strategy for alloction is as
+ * follows:
+ *
+ * RX_LOW_BUF_THRES - allocate buffers in the bottom half
+ * RX_PANIC_LOW_THRES - we are very low on buffers, allocate
+ * the buffers in the interrupt handler
+ * RX_RING_THRES - maximum number of buffers in the rx ring
+ *
+ * One advantagous side effect of this allocation approach is that the
+ * entire rx processing can be done without holding any spin lock
+ * since the rx rings and registers are totally independent of the tx
+ * ring and its registers. This of course includes the kmalloc's of
+ * new skb's. Thus start_xmit can run in parallel with rx processing
+ * and the memory allocation on SMP systems.
+ *
+ * Note that running the skb reallocation in a bottom half opens up
+ * another can of races which needs to be handled properly. In
+ * particular it can happen that the interrupt handler tries to run
+ * the reallocation while the bottom half is either running on another
+ * CPU or was interrupted on the same CPU. To get around this the
+ * driver uses bitops to prevent the reallocation routines from being
+ * reentered.
+ *
+ * TX handling can also be done without holding any spin lock, wheee
+ * this is fun! since tx_csm is only written to by the interrupt
+ * handler.
+ */
+
+/*
+ * Threshold values for RX buffer allocation - the low water marks for
+ * when to start refilling the rings are set to 75% of the ring
+ * sizes. It seems to make sense to refill the rings entirely from the
+ * intrrupt handler once it gets below the panic threshold, that way
+ * we don't risk that the refilling is moved to another CPU when the
+ * one running the interrupt handler just got the slab code hot in its
+ * cache.
+ */
+#define RX_RING_SIZE AR2313_DESCR_ENTRIES
+#define RX_PANIC_THRES (RX_RING_SIZE/4)
+#define RX_LOW_THRES ((3*RX_RING_SIZE)/4)
+#define CRC_LEN 4
+#define RX_OFFSET 2
+
+#define AR2313_BUFSIZE (AR2313_MTU + ETH_HLEN + CRC_LEN + RX_OFFSET)
+
+#ifdef MODULE
+MODULE_AUTHOR("Sameer Dekate <sdekate@arubanetworks.com>, Imre Kaloz <kaloz@openwrt.org>, Felix Fietkau <nbd@openwrt.org>");
+MODULE_DESCRIPTION("AR2313 Ethernet driver");
+#endif
+
+#if DEBUG
+static char version[] __initdata =
+ "ar2313.c: v0.03 2006/07/12 sdekate@arubanetworks.com\n";
+#endif /* DEBUG */
+
+#define virt_to_phys(x) ((u32)(x) & 0x1fffffff)
+
+// prototypes
+static short armiiread(short phy, short reg);
+static void armiiwrite(short phy, short reg, short data);
+#ifdef TX_TIMEOUT
+static void ar2313_tx_timeout(struct net_device *dev);
+#endif
+static void ar2313_halt(struct net_device *dev);
+static void rx_tasklet_func(unsigned long data);
+static void ar2313_multicast_list(struct net_device *dev);
+
+static int probed __initdata = 0;
+static unsigned long ar_eth_base;
+static unsigned long ar_dma_base;
+static unsigned long ar_int_base;
+static unsigned long ar_int_mac_mask;
+static unsigned long ar_int_phy_mask;
+
+#ifndef ERR
+#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
+#endif
+
+
+int __init ar2313_probe(struct platform_device *pdev)
+{
+ struct net_device *dev;
+ struct ar2313_private *sp;
+ struct ar531x_eth *cfg;
+ struct resource *res;
+ int version_disp;
+ char name[64] ;
+
+ if (probed)
+ return -ENODEV;
+ probed++;
+
+ version_disp = 0;
+ sprintf(name, "%s%%d", ifname) ;
+ dev = alloc_etherdev(sizeof(struct ar2313_private));
+
+ if (dev == NULL) {
+ printk(KERN_ERR "ar2313: Unable to allocate net_device structure!\n");
+ return -ENOMEM;
+ }
+
+ SET_MODULE_OWNER(dev);
+ platform_set_drvdata(pdev, dev);
+
+ sp = dev->priv;
+ sp->dev = dev;
+ cfg = pdev->dev.platform_data;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "eth_membase");
+ if (!res)
+ return -ENODEV;
+
+ sp->link = 0;
+ ar_eth_base = res->start;
+ ar_dma_base = ar_eth_base + 0x1000;
+ ar_int_base = cfg->reset_base;
+ ar_int_mac_mask = cfg->reset_mac;
+ ar_int_phy_mask = cfg->reset_phy;
+ sp->phy = cfg->phy;
+
+ dev->irq = platform_get_irq_byname(pdev, "eth_irq");
+
+ spin_lock_init(&sp->lock);
+
+ /* initialize func pointers */
+ dev->open = &ar2313_open;
+ dev->stop = &ar2313_close;
+ dev->hard_start_xmit = &ar2313_start_xmit;
+
+ dev->get_stats = &ar2313_get_stats;
+ dev->set_multicast_list = &ar2313_multicast_list;
+#ifdef TX_TIMEOUT
+ dev->tx_timeout = ar2313_tx_timeout;
+ dev->watchdog_timeo = AR2313_TX_TIMEOUT;
+#endif
+ dev->do_ioctl = &ar2313_ioctl;
+
+ // SAMEER: do we need this?
+ dev->features |= NETIF_F_SG | NETIF_F_HIGHDMA;
+
+ tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev);
+ tasklet_disable(&sp->rx_tasklet);
+
+ /* display version info if adapter is found */
+ if (!version_disp) {
+ /* set display flag to TRUE so that */
+ /* we only display this string ONCE */
+ version_disp = 1;
+#if DEBUG
+ printk(version);
+#endif /* DEBUG */
+ }
+
+#if 0
+ request_region(PHYSADDR(ar_eth_base), ETHERNET_SIZE*ETHERNET_MACS,
+ "AR2313ENET");
+#endif
+
+ sp->eth_regs = ioremap_nocache(PHYSADDR(ar_eth_base), sizeof(*sp->eth_regs));
+ if (!sp->eth_regs) {
+ printk("Can't remap eth registers\n");
+ return(-ENXIO);
+ }
+
+ sp->dma_regs = ioremap_nocache(PHYSADDR(ar_eth_base + 0x1000), sizeof(*sp->dma_regs));
+ dev->base_addr = (unsigned int) sp->dma_regs;
+ if (!sp->dma_regs) {
+ printk("Can't remap DMA registers\n");
+ return(-ENXIO);
+ }
+
+ sp->int_regs = ioremap_nocache(PHYSADDR(ar_int_base), 4);
+ if (!sp->int_regs) {
+ printk("Can't remap INTERRUPT registers\n");
+ return(-ENXIO);
+ }
+
+ strncpy(sp->name, "Atheros AR2313", sizeof (sp->name) - 1);
+ sp->name [sizeof (sp->name) - 1] = '\0';
+
+ {
+ /* XXX: Will have to rewrite this part later */
+ char *configstart;
+ unsigned char def_mac[6] = {0, 0xaa, 0xbb, 0xcc, 0xdd, 0xee};
+
+ configstart = (char *) cfg->board_config;
+
+ if (!configstart) {
+ printk("no valid mac found, using defaults");
+ memcpy(dev->dev_addr, def_mac, 6);
+ } else {
+ memcpy(dev->dev_addr, ((u8 *)configstart)+102, 6);
+ }
+ }
+
+ sp->board_idx = BOARD_IDX_STATIC;
+
+ if (ar2313_init(dev)) {
+ /*
+ * ar2313_init() calls ar2313_init_cleanup() on error.
+ */
+ kfree(dev);
+ return -ENODEV;
+ }
+
+ if (register_netdev(dev)){
+ printk("%s: register_netdev failed\n", __func__);
+ return -1;
+ }
+
+ printk("%s: %s: %02x:%02x:%02x:%02x:%02x:%02x, irq %d\n",
+ dev->name, sp->name,
+ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
+ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5],
+ dev->irq);
+
+ /* start link poll timer */
+ ar2313_setup_timer(dev);
+
+ return 0;
+}
+
+#if 0
+static void ar2313_dump_regs(struct net_device *dev)
+{
+ unsigned int *ptr, i;
+ struct ar2313_private *sp = (struct ar2313_private *)dev->priv;
+
+ ptr = (unsigned int *)sp->eth_regs;
+ for(i=0; i< (sizeof(ETHERNET_STRUCT)/ sizeof(unsigned int)); i++, ptr++) {
+ printk("ENET: %08x = %08x\n", (int)ptr, *ptr);
+ }
+
+ ptr = (unsigned int *)sp->dma_regs;
+ for(i=0; i< (sizeof(DMA)/ sizeof(unsigned int)); i++, ptr++) {
+ printk("DMA: %08x = %08x\n", (int)ptr, *ptr);
+ }
+
+ ptr = (unsigned int *)sp->int_regs;
+ for(i=0; i< (sizeof(INTERRUPT)/ sizeof(unsigned int)); i++, ptr++){
+ printk("INT: %08x = %08x\n", (int)ptr, *ptr);
+ }
+
+ for (i = 0; i < AR2313_DESCR_ENTRIES; i++) {
+ ar2313_descr_t *td = &sp->tx_ring[i];
+ printk("Tx desc %2d: %08x %08x %08x %08x\n", i,
+ td->status, td->devcs, td->addr, td->descr);
+ }
+}
+#endif
+
+#ifdef TX_TIMEOUT
+static void
+ar2313_tx_timeout(struct net_device *dev)
+{
+ struct ar2313_private *sp = (struct ar2313_private *)dev->priv;
+ unsigned long flags;
+
+#if DEBUG_TX
+ printk("Tx timeout\n");
+#endif
+ spin_lock_irqsave(&sp->lock, flags);
+ ar2313_restart(dev);
+ spin_unlock_irqrestore(&sp->lock, flags);
+}
+#endif
+
+#if DEBUG_MC
+static void
+printMcList(struct net_device *dev)
+{
+ struct dev_mc_list *list = dev->mc_list;
+ int num=0, i;
+ while(list){
+ printk("%d MC ADDR ", num);
+ for(i=0;i<list->dmi_addrlen;i++) {
+ printk(":%02x", list->dmi_addr[i]);
+ }
+ list = list->next;
+ printk("\n");
+ }
+}
+#endif
+
+/*
+ * Set or clear the multicast filter for this adaptor.
+ * THIS IS ABSOLUTE CRAP, disabled
+ */
+static void
+ar2313_multicast_list(struct net_device *dev)
+{
+ /*
+ * Always listen to broadcasts and
+ * treat IFF bits independently
+ */
+ struct ar2313_private *sp = (struct ar2313_private *)dev->priv;
+ unsigned int recognise;
+
+ recognise = sp->eth_regs->mac_control;
+
+ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
+ recognise |= MAC_CONTROL_PR;
+ } else {
+ recognise &= ~MAC_CONTROL_PR;
+ }
+
+ if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 15)) {
+#if DEBUG_MC
+ printMcList(dev);
+ printk("%s: all MULTICAST mc_count %d\n", __FUNCTION__, dev->mc_count);
+#endif
+ recognise |= MAC_CONTROL_PM;/* all multicast */
+ } else if (dev->mc_count > 0) {
+#if DEBUG_MC
+ printMcList(dev);
+ printk("%s: mc_count %d\n", __FUNCTION__, dev->mc_count);
+#endif
+ recognise |= MAC_CONTROL_PM; /* for the time being */
+ }
+#if DEBUG_MC
+ printk("%s: setting %08x to %08x\n", __FUNCTION__, (int)sp->eth_regs, recognise);
+#endif
+
+ sp->eth_regs->mac_control = recognise;
+}
+
+static void rx_tasklet_cleanup(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+
+ /*
+ * Tasklet may be scheduled. Need to get it removed from the list
+ * since we're about to free the struct.
+ */
+
+ sp->unloading = 1;
+ tasklet_enable(&sp->rx_tasklet);
+ tasklet_kill(&sp->rx_tasklet);
+}
+
+static int __exit ar2313_remove(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ rx_tasklet_cleanup(dev);
+ ar2313_init_cleanup(dev);
+ unregister_netdev(dev);
+ kfree(dev);
+ return 0;
+}
+
+
+/*
+ * Restart the AR2313 ethernet controller.
+ */
+static int ar2313_restart(struct net_device *dev)
+{
+ /* disable interrupts */
+ disable_irq(dev->irq);
+
+ /* stop mac */
+ ar2313_halt(dev);
+
+ /* initialize */
+ ar2313_init(dev);
+
+ /* enable interrupts */
+ enable_irq(dev->irq);
+
+ return 0;
+}
+
+static struct platform_driver ar2313_driver = {
+ .driver.name = "ar531x-eth",
+ .probe = ar2313_probe,
+ .remove = ar2313_remove,
+};
+
+int __init ar2313_module_init(void)
+{
+ return platform_driver_register(&ar2313_driver);
+}
+
+void __exit ar2313_module_cleanup(void)
+{
+ platform_driver_unregister(&ar2313_driver);
+}
+
+module_init(ar2313_module_init);
+module_exit(ar2313_module_cleanup);
+
+
+static void ar2313_free_descriptors(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ if (sp->rx_ring != NULL) {
+ kfree((void*)KSEG0ADDR(sp->rx_ring));
+ sp->rx_ring = NULL;
+ sp->tx_ring = NULL;
+ }
+}
+
+
+static int ar2313_allocate_descriptors(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ int size;
+ int j;
+ ar2313_descr_t *space;
+
+ if(sp->rx_ring != NULL){
+ printk("%s: already done.\n", __FUNCTION__);
+ return 0;
+ }
+
+ size = (sizeof(ar2313_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES));
+ space = kmalloc(size, GFP_KERNEL);
+ if (space == NULL)
+ return 1;
+
+ /* invalidate caches */
+ dma_cache_inv((unsigned int)space, size);
+
+ /* now convert pointer to KSEG1 */
+ space = (ar2313_descr_t *)KSEG1ADDR(space);
+
+ memset((void *)space, 0, size);
+
+ sp->rx_ring = space;
+ space += AR2313_DESCR_ENTRIES;
+
+ sp->tx_ring = space;
+ space += AR2313_DESCR_ENTRIES;
+
+ /* Initialize the transmit Descriptors */
+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
+ ar2313_descr_t *td = &sp->tx_ring[j];
+ td->status = 0;
+ td->devcs = DMA_TX1_CHAINED;
+ td->addr = 0;
+ td->descr = K1_TO_PHYS(&sp->tx_ring[(j+1) & (AR2313_DESCR_ENTRIES-1)]);
+ }
+
+ return 0;
+}
+
+
+/*
+ * Generic cleanup handling data allocated during init. Used when the
+ * module is unloaded or if an error occurs during initialization
+ */
+static void ar2313_init_cleanup(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ struct sk_buff *skb;
+ int j;
+
+ ar2313_free_descriptors(dev);
+
+ if (sp->eth_regs) iounmap((void*)sp->eth_regs);
+ if (sp->dma_regs) iounmap((void*)sp->dma_regs);
+
+ if (sp->rx_skb) {
+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
+ skb = sp->rx_skb[j];
+ if (skb) {
+ sp->rx_skb[j] = NULL;
+ dev_kfree_skb(skb);
+ }
+ }
+ kfree(sp->rx_skb);
+ sp->rx_skb = NULL;
+ }
+
+ if (sp->tx_skb) {
+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
+ skb = sp->tx_skb[j];
+ if (skb) {
+ sp->tx_skb[j] = NULL;
+ dev_kfree_skb(skb);
+ }
+ }
+ kfree(sp->tx_skb);
+ sp->tx_skb = NULL;
+ }
+}
+
+static int ar2313_setup_timer(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+
+ init_timer(&sp->link_timer);
+
+ sp->link_timer.function = ar2313_link_timer_fn;
+ sp->link_timer.data = (int) dev;
+ sp->link_timer.expires = jiffies + HZ;
+
+ add_timer(&sp->link_timer);
+ return 0;
+
+}
+
+static void ar2313_link_timer_fn(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *) data;
+ struct ar2313_private *sp = dev->priv;
+
+ // see if the link status changed
+ // This was needed to make sure we set the PHY to the
+ // autonegotiated value of half or full duplex.
+ ar2313_check_link(dev);
+
+ // Loop faster when we don't have link.
+ // This was needed to speed up the AP bootstrap time.
+ if(sp->link == 0) {
+ mod_timer(&sp->link_timer, jiffies + HZ/2);
+ } else {
+ mod_timer(&sp->link_timer, jiffies + LINK_TIMER);
+ }
+}
+
+static void ar2313_check_link(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ u16 phyData;
+
+ phyData = armiiread(sp->phy, MII_BMSR);
+ if (sp->phyData != phyData) {
+ if (phyData & BMSR_LSTATUS) {
+ /* link is present, ready link partner ability to deterine duplexity */
+ int duplex = 0;
+ u16 reg;
+
+ sp->link = 1;
+ reg = armiiread(sp->phy, MII_BMCR);
+ if (reg & BMCR_ANENABLE) {
+ /* auto neg enabled */
+ reg = armiiread(sp->phy, MII_LPA);
+ duplex = (reg & (LPA_100FULL|LPA_10FULL))? 1:0;
+ } else {
+ /* no auto neg, just read duplex config */
+ duplex = (reg & BMCR_FULLDPLX)? 1:0;
+ }
+
+ printk(KERN_INFO "%s: Configuring MAC for %s duplex\n", dev->name,
+ (duplex)? "full":"half");
+
+ if (duplex) {
+ /* full duplex */
+ sp->eth_regs->mac_control = ((sp->eth_regs->mac_control | MAC_CONTROL_F) &
+ ~MAC_CONTROL_DRO);
+ } else {
+ /* half duplex */
+ sp->eth_regs->mac_control = ((sp->eth_regs->mac_control | MAC_CONTROL_DRO) &
+ ~MAC_CONTROL_F);
+ }
+ } else {
+ /* no link */
+ sp->link = 0;
+ }
+ sp->phyData = phyData;
+ }
+}
+
+static int
+ar2313_reset_reg(struct net_device *dev)
+{
+ struct ar2313_private *sp = (struct ar2313_private *)dev->priv;
+ unsigned int ethsal, ethsah;
+ unsigned int flags;
+
+ *sp->int_regs |= ar_int_mac_mask;
+ mdelay(10);
+ *sp->int_regs &= ~ar_int_mac_mask;
+ mdelay(10);
+ *sp->int_regs |= ar_int_phy_mask;
+ mdelay(10);
+ *sp->int_regs &= ~ar_int_phy_mask;
+ mdelay(10);
+
+ sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR);
+ mdelay(10);
+ sp->dma_regs->bus_mode = ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE);
+
+ /* enable interrupts */
+ sp->dma_regs->intr_ena = (DMA_STATUS_AIS |
+ DMA_STATUS_NIS |
+ DMA_STATUS_RI |
+ DMA_STATUS_TI |
+ DMA_STATUS_FBE);
+ sp->dma_regs->xmt_base = K1_TO_PHYS(sp->tx_ring);
+ sp->dma_regs->rcv_base = K1_TO_PHYS(sp->rx_ring);
+ sp->dma_regs->control = (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF);
+
+ sp->eth_regs->flow_control = (FLOW_CONTROL_FCE);
+ sp->eth_regs->vlan_tag = (0x8100);
+
+ /* Enable Ethernet Interface */
+ flags = (MAC_CONTROL_TE | /* transmit enable */
+ MAC_CONTROL_PM | /* pass mcast */
+ MAC_CONTROL_F | /* full duplex */
+ MAC_CONTROL_HBD); /* heart beat disabled */
+
+ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
+ flags |= MAC_CONTROL_PR;
+ }
+ sp->eth_regs->mac_control = flags;
+
+ /* Set all Ethernet station address registers to their initial values */
+ ethsah = ((((u_int)(dev->dev_addr[5]) << 8) & (u_int)0x0000FF00) |
+ (((u_int)(dev->dev_addr[4]) << 0) & (u_int)0x000000FF));
+
+ ethsal = ((((u_int)(dev->dev_addr[3]) << 24) & (u_int)0xFF000000) |
+ (((u_int)(dev->dev_addr[2]) << 16) & (u_int)0x00FF0000) |
+ (((u_int)(dev->dev_addr[1]) << 8) & (u_int)0x0000FF00) |
+ (((u_int)(dev->dev_addr[0]) << 0) & (u_int)0x000000FF) );
+
+ sp->eth_regs->mac_addr[0] = ethsah;
+ sp->eth_regs->mac_addr[1] = ethsal;
+
+ mdelay(10);
+
+ return(0);
+}
+
+
+static int ar2313_init(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ int ecode=0;
+
+ /*
+ * Allocate descriptors
+ */
+ if (ar2313_allocate_descriptors(dev)) {
+ printk("%s: %s: ar2313_allocate_descriptors failed\n",
+ dev->name, __FUNCTION__);
+ ecode = -EAGAIN;
+ goto init_error;
+ }
+
+ /*
+ * Get the memory for the skb rings.
+ */
+ if(sp->rx_skb == NULL) {
+ sp->rx_skb = kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES, GFP_KERNEL);
+ if (!(sp->rx_skb)) {
+ printk("%s: %s: rx_skb kmalloc failed\n",
+ dev->name, __FUNCTION__);
+ ecode = -EAGAIN;
+ goto init_error;
+ }
+ }
+ memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
+
+ if(sp->tx_skb == NULL) {
+ sp->tx_skb = kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES, GFP_KERNEL);
+ if (!(sp->tx_skb)) {
+ printk("%s: %s: tx_skb kmalloc failed\n",
+ dev->name, __FUNCTION__);
+ ecode = -EAGAIN;
+ goto init_error;
+ }
+ }
+ memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
+
+ /*
+ * Set tx_csm before we start receiving interrupts, otherwise
+ * the interrupt handler might think it is supposed to process
+ * tx ints before we are up and running, which may cause a null
+ * pointer access in the int handler.
+ */
+ sp->rx_skbprd = 0;
+ sp->cur_rx = 0;
+ sp->tx_prd = 0;
+ sp->tx_csm = 0;
+
+ /*
+ * Zero the stats before starting the interface
+ */
+ memset(&sp->stats, 0, sizeof(sp->stats));
+
+ /*
+ * We load the ring here as there seem to be no way to tell the
+ * firmware to wipe the ring without re-initializing it.
+ */
+ ar2313_load_rx_ring(dev, RX_RING_SIZE);
+
+ /*
+ * Init hardware
+ */
+ ar2313_reset_reg(dev);
+
+ /*
+ * Get the IRQ
+ */
+ ecode = request_irq(dev->irq, &ar2313_interrupt, IRQF_SHARED | IRQF_DISABLED | IRQF_SAMPLE_RANDOM, dev->name, dev);
+ if (ecode) {
+ printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n",
+ dev->name, __FUNCTION__, dev->irq);
+ goto init_error;
+ }
+
+
+ tasklet_enable(&sp->rx_tasklet);
+
+ return 0;
+
+ init_error:
+ ar2313_init_cleanup(dev);
+ return ecode;
+}
+
+/*
+ * Load the rx ring.
+ *
+ * Loading rings is safe without holding the spin lock since this is
+ * done only before the device is enabled, thus no interrupts are
+ * generated and by the interrupt handler/tasklet handler.
+ */
+static void ar2313_load_rx_ring(struct net_device *dev, int nr_bufs)
+{
+
+ struct ar2313_private *sp = ((struct net_device *)dev)->priv;
+ short i, idx;
+
+ idx = sp->rx_skbprd;
+
+ for (i = 0; i < nr_bufs; i++) {
+ struct sk_buff *skb;
+ ar2313_descr_t *rd;
+
+ if (sp->rx_skb[idx]) {
+#if DEBUG_RX
+ printk(KERN_INFO "ar2313 rx refill full\n");
+#endif /* DEBUG */
+ break;
+ }
+
+ // partha: create additional room for the second GRE fragment
+ skb = alloc_skb(AR2313_BUFSIZE+128, GFP_ATOMIC);
+ if (!skb) {
+ printk("\n\n\n\n %s: No memory in system\n\n\n\n", __FUNCTION__);
+ break;
+ }
+ // partha: create additional room in the front for tx pkt capture
+ skb_reserve(skb, 32);
+
+ /*
+ * Make sure IP header starts on a fresh cache line.
+ */
+ skb->dev = dev;
+ skb_reserve(skb, RX_OFFSET);
+ sp->rx_skb[idx] = skb;
+
+ rd = (ar2313_descr_t *) &sp->rx_ring[idx];
+
+ /* initialize dma descriptor */
+ rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
+ DMA_RX1_CHAINED);
+ rd->addr = virt_to_phys(skb->data);
+ rd->descr = virt_to_phys(&sp->rx_ring[(idx+1) & (AR2313_DESCR_ENTRIES-1)]);
+ rd->status = DMA_RX_OWN;
+
+ idx = DSC_NEXT(idx);
+ }
+
+ if (!i) {
+#if DEBUG_ERR
+ printk(KERN_INFO "Out of memory when allocating standard receive buffers\n");
+#endif /* DEBUG */
+ } else {
+ sp->rx_skbprd = idx;
+ }
+
+ return;
+}
+
+#define AR2313_MAX_PKTS_PER_CALL 64
+
+static int ar2313_rx_int(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ struct sk_buff *skb, *skb_new;
+ ar2313_descr_t *rxdesc;
+ unsigned int status;
+ u32 idx;
+ int pkts = 0;
+ int rval;
+
+ idx = sp->cur_rx;
+
+ /* process at most the entire ring and then wait for another interrupt */
+ while(1) {
+
+ rxdesc = &sp->rx_ring[idx];
+ status = rxdesc->status;
+ if (status & DMA_RX_OWN) {
+ /* SiByte owns descriptor or descr not yet filled in */
+ rval = 0;
+ break;
+ }
+
+ if (++pkts > AR2313_MAX_PKTS_PER_CALL) {
+ rval = 1;
+ break;
+ }
+
+#if DEBUG_RX
+ printk("index %d\n", idx);
+ printk("RX status %08x\n", rxdesc->status);
+ printk("RX devcs %08x\n", rxdesc->devcs );
+ printk("RX addr %08x\n", rxdesc->addr );
+ printk("RX descr %08x\n", rxdesc->descr );
+#endif
+
+ if ((status & (DMA_RX_ERROR|DMA_RX_ERR_LENGTH)) &&
+ (!(status & DMA_RX_LONG))){
+#if DEBUG_RX
+ printk("%s: rx ERROR %08x\n", __FUNCTION__, status);
+#endif
+ sp->stats.rx_errors++;
+ sp->stats.rx_dropped++;
+
+ /* add statistics counters */
+ if (status & DMA_RX_ERR_CRC) sp->stats.rx_crc_errors++;
+ if (status & DMA_RX_ERR_COL) sp->stats.rx_over_errors++;
+ if (status & DMA_RX_ERR_LENGTH)
+ sp->stats.rx_length_errors++;
+ if (status & DMA_RX_ERR_RUNT) sp->stats.rx_over_errors++;
+ if (status & DMA_RX_ERR_DESC) sp->stats.rx_over_errors++;
+
+ } else {
+ /* alloc new buffer. */
+ skb_new = dev_alloc_skb(AR2313_BUFSIZE + RX_OFFSET + 128);
+ if (skb_new != NULL) {
+
+ skb = sp->rx_skb[idx];
+ /* set skb */
+ skb_put(skb, ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
+
+#ifdef CONFIG_MERLOT
+ if ((dev->am_pkt_handler == NULL) ||
+ (dev->am_pkt_handler(skb, dev) == 0)) {
+#endif
+ sp->stats.rx_bytes += skb->len;
+ skb->protocol = eth_type_trans(skb, dev);
+ /* pass the packet to upper layers */
+
+#ifdef CONFIG_MERLOT
+ if (dev->asap_netif_rx)
+ dev->asap_netif_rx(skb);
+ else
+#endif
+ netif_rx(skb);
+#ifdef CONFIG_MERLOT
+ }
+#endif
+ skb_new->dev = dev;
+ /* 16 bit align */
+ skb_reserve(skb_new, RX_OFFSET+32);
+ /* reset descriptor's curr_addr */
+ rxdesc->addr = virt_to_phys(skb_new->data);
+
+ sp->stats.rx_packets++;
+ sp->rx_skb[idx] = skb_new;
+
+ } else {
+ sp->stats.rx_dropped++;
+ }
+ }
+
+ rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
+ DMA_RX1_CHAINED);
+ rxdesc->status = DMA_RX_OWN;
+
+ idx = DSC_NEXT(idx);
+ }
+
+ sp->cur_rx = idx;
+
+ return rval;
+}
+
+
+static void ar2313_tx_int(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ u32 idx;
+ struct sk_buff *skb;
+ ar2313_descr_t *txdesc;
+ unsigned int status=0;
+
+ idx = sp->tx_csm;
+
+ while (idx != sp->tx_prd) {
+
+ txdesc = &sp->tx_ring[idx];
+
+#if DEBUG_TX
+ printk("%s: TXINT: csm=%d idx=%d prd=%d status=%x devcs=%x addr=%08x descr=%x\n",
+ dev->name, sp->tx_csm, idx, sp->tx_prd,
+ txdesc->status, txdesc->devcs, txdesc->addr, txdesc->descr);
+#endif /* DEBUG */
+
+ if ((status = txdesc->status) & DMA_TX_OWN) {
+ /* ar2313 dma still owns descr */
+ break;
+ }
+ /* done with this descriptor */
+ dma_unmap_single(NULL, txdesc->addr, txdesc->devcs & DMA_TX1_BSIZE_MASK, DMA_TO_DEVICE);
+ txdesc->status = 0;
+
+ if (status & DMA_TX_ERROR){
+ sp->stats.tx_errors++;
+ sp->stats.tx_dropped++;
+ if(status & DMA_TX_ERR_UNDER)
+ sp->stats.tx_fifo_errors++;
+ if(status & DMA_TX_ERR_HB)
+ sp->stats.tx_heartbeat_errors++;
+ if(status & (DMA_TX_ERR_LOSS |
+ DMA_TX_ERR_LINK))
+ sp->stats.tx_carrier_errors++;
+ if (status & (DMA_TX_ERR_LATE|
+ DMA_TX_ERR_COL |
+ DMA_TX_ERR_JABBER |
+ DMA_TX_ERR_DEFER))
+ sp->stats.tx_aborted_errors++;
+ } else {
+ /* transmit OK */
+ sp->stats.tx_packets++;
+ }
+
+ skb = sp->tx_skb[idx];
+ sp->tx_skb[idx] = NULL;
+ idx = DSC_NEXT(idx);
+ sp->stats.tx_bytes += skb->len;
+ dev_kfree_skb_irq(skb);
+ }
+
+ sp->tx_csm = idx;
+
+ return;
+}
+
+
+static void
+rx_tasklet_func(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *) data;
+ struct ar2313_private *sp = dev->priv;
+
+ if (sp->unloading) {
+ return;
+ }
+
+ if (ar2313_rx_int(dev)) {
+ tasklet_hi_schedule(&sp->rx_tasklet);
+ }
+ else {
+ unsigned long flags;
+ spin_lock_irqsave(&sp->lock, flags);
+ sp->dma_regs->intr_ena |= DMA_STATUS_RI;
+ spin_unlock_irqrestore(&sp->lock, flags);
+ }
+}
+
+static void
+rx_schedule(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+
+ sp->dma_regs->intr_ena &= ~DMA_STATUS_RI;
+
+ tasklet_hi_schedule(&sp->rx_tasklet);
+}
+
+static irqreturn_t ar2313_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = (struct net_device *)dev_id;
+ struct ar2313_private *sp = dev->priv;
+ unsigned int status, enabled;
+
+ /* clear interrupt */
+ /*
+ * Don't clear RI bit if currently disabled.
+ */
+ status = sp->dma_regs->status;
+ enabled = sp->dma_regs->intr_ena;
+ sp->dma_regs->status = status & enabled;
+
+ if (status & DMA_STATUS_NIS) {
+ /* normal status */
+ /*
+ * Don't schedule rx processing if interrupt
+ * is already disabled.
+ */
+ if (status & enabled & DMA_STATUS_RI) {
+ /* receive interrupt */
+ rx_schedule(dev);
+ }
+ if (status & DMA_STATUS_TI) {
+ /* transmit interrupt */
+ ar2313_tx_int(dev);
+ }
+ }
+
+ if (status & DMA_STATUS_AIS) {
+#if DEBUG_INT
+ printk("%s: AIS set %08x & %x\n", __FUNCTION__,
+ status, (DMA_STATUS_FBE | DMA_STATUS_TPS));
+#endif
+ /* abnormal status */
+ if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) {
+ ar2313_restart(dev);
+ }
+ }
+ return IRQ_HANDLED;
+}
+
+
+static int ar2313_open(struct net_device *dev)
+{
+ struct ar2313_private *sp;
+
+ sp = dev->priv;
+
+ dev->mtu = 1500;
+ netif_start_queue(dev);
+
+ sp->eth_regs->mac_control |= MAC_CONTROL_RE;
+
+ AR2313_MOD_INC_USE_COUNT;
+
+ return 0;
+}
+
+static void ar2313_halt(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ int j;
+
+ tasklet_disable(&sp->rx_tasklet);
+
+ /* kill the MAC */
+ sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE | /* disable Receives */
+ MAC_CONTROL_TE); /* disable Transmits */
+ /* stop dma */
+ sp->dma_regs->control = 0;
+ sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR;
+
+ /* place phy and MAC in reset */
+ *sp->int_regs |= (ar_int_mac_mask | ar_int_phy_mask);
+
+ /* free buffers on tx ring */
+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
+ struct sk_buff *skb;
+ ar2313_descr_t *txdesc;
+
+ txdesc = &sp->tx_ring[j];
+ txdesc->descr = 0;
+
+ skb = sp->tx_skb[j];
+ if (skb) {
+ dev_kfree_skb(skb);
+ sp->tx_skb[j] = NULL;
+ }
+ }
+}
+
+/*
+ * close should do nothing. Here's why. It's called when
+ * 'ifconfig bond0 down' is run. If it calls free_irq then
+ * the irq is gone forever ! When bond0 is made 'up' again,
+ * the ar2313_open () does not call request_irq (). Worse,
+ * the call to ar2313_halt() generates a WDOG reset due to
+ * the write to 'sp->int_regs' and the box reboots.
+ * Commenting this out is good since it allows the
+ * system to resume when bond0 is made up again.
+ */
+static int ar2313_close(struct net_device *dev)
+{
+#if 0
+ /*
+ * Disable interrupts
+ */
+ disable_irq(dev->irq);
+
+ /*
+ * Without (or before) releasing irq and stopping hardware, this
+ * is an absolute non-sense, by the way. It will be reset instantly
+ * by the first irq.
+ */
+ netif_stop_queue(dev);
+
+ /* stop the MAC and DMA engines */
+ ar2313_halt(dev);
+
+ /* release the interrupt */
+ free_irq(dev->irq, dev);
+
+#endif
+ AR2313_MOD_DEC_USE_COUNT;
+ return 0;
+}
+
+static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ ar2313_descr_t *td;
+ u32 idx;
+
+ idx = sp->tx_prd;
+ td = &sp->tx_ring[idx];
+
+ if (td->status & DMA_TX_OWN) {
+#if DEBUG_TX
+ printk("%s: No space left to Tx\n", __FUNCTION__);
+#endif
+ /* free skbuf and lie to the caller that we sent it out */
+ sp->stats.tx_dropped++;
+ dev_kfree_skb(skb);
+
+ /* restart transmitter in case locked */
+ sp->dma_regs->xmt_poll = 0;
+ return 0;
+ }
+
+ /* Setup the transmit descriptor. */
+ td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) |
+ (DMA_TX1_LS|DMA_TX1_IC|DMA_TX1_CHAINED));
+ td->addr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
+ td->status = DMA_TX_OWN;
+
+ /* kick transmitter last */
+ sp->dma_regs->xmt_poll = 0;
+
+#if DEBUG_TX
+ printk("index %d\n", idx);
+ printk("TX status %08x\n", td->status);
+ printk("TX devcs %08x\n", td->devcs );
+ printk("TX addr %08x\n", td->addr );
+ printk("TX descr %08x\n", td->descr );
+#endif
+
+ sp->tx_skb[idx] = skb;
+ idx = DSC_NEXT(idx);
+ sp->tx_prd = idx;
+
+ //dev->trans_start = jiffies;
+
+ return 0;
+}
+
+static int netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ struct ar2313_private *np = dev->priv;
+ u32 tmp;
+
+ ecmd->supported =
+ (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
+ SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII);
+
+ ecmd->port = PORT_TP;
+ /* only supports internal transceiver */
+ ecmd->transceiver = XCVR_INTERNAL;
+ /* not sure what this is for */
+ ecmd->phy_address = 1;
+
+ ecmd->advertising = ADVERTISED_MII;
+ tmp = armiiread(np->phy, MII_ADVERTISE);
+ if (tmp & ADVERTISE_10HALF)
+ ecmd->advertising |= ADVERTISED_10baseT_Half;
+ if (tmp & ADVERTISE_10FULL)
+ ecmd->advertising |= ADVERTISED_10baseT_Full;
+ if (tmp & ADVERTISE_100HALF)
+ ecmd->advertising |= ADVERTISED_100baseT_Half;
+ if (tmp & ADVERTISE_100FULL)
+ ecmd->advertising |= ADVERTISED_100baseT_Full;
+
+ tmp = armiiread(np->phy, MII_BMCR);
+ if (tmp & BMCR_ANENABLE) {
+ ecmd->advertising |= ADVERTISED_Autoneg;
+ ecmd->autoneg = AUTONEG_ENABLE;
+ } else {
+ ecmd->autoneg = AUTONEG_DISABLE;
+ }
+
+ if (ecmd->autoneg == AUTONEG_ENABLE) {
+ tmp = armiiread(np->phy, MII_LPA);
+ if (tmp & (LPA_100FULL|LPA_10FULL)) {
+ ecmd->duplex = DUPLEX_FULL;
+ } else {
+ ecmd->duplex = DUPLEX_HALF;
+ }
+ if (tmp & (LPA_100FULL|LPA_100HALF)) {
+ ecmd->speed = SPEED_100;
+ } else {
+ ecmd->speed = SPEED_10;
+ }
+ } else {
+ if (tmp & BMCR_FULLDPLX) {
+ ecmd->duplex = DUPLEX_FULL;
+ } else {
+ ecmd->duplex = DUPLEX_HALF;
+ }
+ if (tmp & BMCR_SPEED100) {
+ ecmd->speed = SPEED_100;
+ } else {
+ ecmd->speed = SPEED_10;
+ }
+ }
+
+ /* ignore maxtxpkt, maxrxpkt for now */
+
+ return 0;
+}
+
+static int netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ struct ar2313_private *np = dev->priv;
+ u32 tmp;
+
+ if (ecmd->speed != SPEED_10 && ecmd->speed != SPEED_100)
+ return -EINVAL;
+ if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
+ return -EINVAL;
+ if (ecmd->port != PORT_TP)
+ return -EINVAL;
+ if (ecmd->transceiver != XCVR_INTERNAL)
+ return -EINVAL;
+ if (ecmd->autoneg != AUTONEG_DISABLE && ecmd->autoneg != AUTONEG_ENABLE)
+ return -EINVAL;
+ /* ignore phy_address, maxtxpkt, maxrxpkt for now */
+
+ /* WHEW! now lets bang some bits */
+
+ tmp = armiiread(np->phy, MII_BMCR);
+ if (ecmd->autoneg == AUTONEG_ENABLE) {
+ /* turn on autonegotiation */
+ tmp |= BMCR_ANENABLE;
+ printk("%s: Enabling auto-neg\n", dev->name);
+ } else {
+ /* turn off auto negotiation, set speed and duplexity */
+ tmp &= ~(BMCR_ANENABLE | BMCR_SPEED100 | BMCR_FULLDPLX);
+ if (ecmd->speed == SPEED_100)
+ tmp |= BMCR_SPEED100;
+ if (ecmd->duplex == DUPLEX_FULL)
+ tmp |= BMCR_FULLDPLX;
+ printk("%s: Hard coding %d/%s\n", dev->name,
+ (ecmd->speed == SPEED_100)? 100:10,
+ (ecmd->duplex == DUPLEX_FULL)? "full":"half");
+ }
+ armiiwrite(np->phy, MII_BMCR, tmp);
+ np->phyData = 0;
+ return 0;
+}
+
+static int netdev_ethtool_ioctl(struct net_device *dev, void *useraddr)
+{
+ struct ar2313_private *np = dev->priv;
+ u32 cmd;
+
+ if (get_user(cmd, (u32 *)useraddr))
+ return -EFAULT;
+
+ switch (cmd) {
+ /* get settings */
+ case ETHTOOL_GSET: {
+ struct ethtool_cmd ecmd = { ETHTOOL_GSET };
+ spin_lock_irq(&np->lock);
+ netdev_get_ecmd(dev, &ecmd);
+ spin_unlock_irq(&np->lock);
+ if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
+ return -EFAULT;
+ return 0;
+ }
+ /* set settings */
+ case ETHTOOL_SSET: {
+ struct ethtool_cmd ecmd;
+ int r;
+ if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
+ return -EFAULT;
+ spin_lock_irq(&np->lock);
+ r = netdev_set_ecmd(dev, &ecmd);
+ spin_unlock_irq(&np->lock);
+ return r;
+ }
+ /* restart autonegotiation */
+ case ETHTOOL_NWAY_RST: {
+ int tmp;
+ int r = -EINVAL;
+ /* if autoneg is off, it's an error */
+ tmp = armiiread(np->phy, MII_BMCR);
+ if (tmp & BMCR_ANENABLE) {
+ tmp |= (BMCR_ANRESTART);
+ armiiwrite(np->phy, MII_BMCR, tmp);
+ r = 0;
+ }
+ return r;
+ }
+ /* get link status */
+ case ETHTOOL_GLINK: {
+ struct ethtool_value edata = {ETHTOOL_GLINK};
+ edata.data = (armiiread(np->phy, MII_BMSR)&BMSR_LSTATUS) ? 1:0;
+ if (copy_to_user(useraddr, &edata, sizeof(edata)))
+ return -EFAULT;
+ return 0;
+ }
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ struct mii_ioctl_data *data = (struct mii_ioctl_data *)&ifr->ifr_data;
+
+ switch (cmd) {
+ case SIOCDEVPRIVATE: {
+ struct ar2313_cmd scmd;
+
+ if (copy_from_user(&scmd, ifr->ifr_data, sizeof(scmd)))
+ return -EFAULT;
+
+#if DEBUG
+ printk("%s: ioctl devprivate c=%d a=%x l=%d m=%d d=%x,%x\n",
+ dev->name, scmd.cmd,
+ scmd.address, scmd.length,
+ scmd.mailbox, scmd.data[0], scmd.data[1]);
+#endif /* DEBUG */
+
+ switch (scmd.cmd) {
+ case AR2313_READ_DATA:
+ if(scmd.length==4){
+ scmd.data[0] = *((u32*)scmd.address);
+ } else if(scmd.length==2) {
+ scmd.data[0] = *((u16*)scmd.address);
+ } else if (scmd.length==1) {
+ scmd.data[0] = *((u8*)scmd.address);
+ } else {
+ return -EOPNOTSUPP;
+ }
+ if(copy_to_user(ifr->ifr_data, &scmd, sizeof(scmd)))
+ return -EFAULT;
+ break;
+
+ case AR2313_WRITE_DATA:
+ if(scmd.length==4){
+ *((u32*)scmd.address) = scmd.data[0];
+ } else if(scmd.length==2) {
+ *((u16*)scmd.address) = scmd.data[0];
+ } else if (scmd.length==1) {
+ *((u8*)scmd.address) = scmd.data[0];
+ } else {
+ return -EOPNOTSUPP;
+ }
+ break;
+
+ case AR2313_GET_VERSION:
+ // SAMEER: sprintf((char*) &scmd, "%s", ARUBA_VERSION);
+ if(copy_to_user(ifr->ifr_data, &scmd, sizeof(scmd)))
+ return -EFAULT;
+ break;
+
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+ }
+
+ case SIOCETHTOOL:
+ return netdev_ethtool_ioctl(dev, (void *) ifr->ifr_data);
+
+ case SIOCGMIIPHY: /* Get address of MII PHY in use. */
+ data->phy_id = 1;
+ /* Fall Through */
+
+ case SIOCGMIIREG: /* Read MII PHY register. */
+ case SIOCDEVPRIVATE+1: /* for binary compat, remove in 2.5 */
+ data->val_out = armiiread(data->phy_id & 0x1f,
+ data->reg_num & 0x1f);
+ return 0;
+ case SIOCSMIIREG: /* Write MII PHY register. */
+ case SIOCDEVPRIVATE+2: /* for binary compat, remove in 2.5 */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ armiiwrite(data->phy_id & 0x1f,
+ data->reg_num & 0x1f, data->val_in);
+ return 0;
+
+ case SIOCSIFHWADDR:
+ if (copy_from_user(dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
+ return -EFAULT;
+ return 0;
+
+ case SIOCGIFHWADDR:
+ if (copy_to_user(ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
+ return -EFAULT;
+ return 0;
+
+ default:
+ break;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static struct net_device_stats *ar2313_get_stats(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ return &sp->stats;
+}
+
+static short
+armiiread(short phy, short reg)
+{
+ volatile ETHERNET_STRUCT * ethernet;
+
+ ethernet = (volatile ETHERNET_STRUCT *)(ar_eth_base); /* always MAC 0 */
+ ethernet->mii_addr = ((reg << MII_ADDR_REG_SHIFT) |
+ (phy << MII_ADDR_PHY_SHIFT));
+ while (ethernet->mii_addr & MII_ADDR_BUSY);
+ return (ethernet->mii_data >> MII_DATA_SHIFT);
+}
+
+static void
+armiiwrite(short phy, short reg, short data)
+{
+ volatile ETHERNET_STRUCT * ethernet;
+
+ ethernet = (volatile ETHERNET_STRUCT *)(ar_eth_base); /* always MAC 0 */
+ while (ethernet->mii_addr & MII_ADDR_BUSY);
+ ethernet->mii_data = data << MII_DATA_SHIFT;
+ ethernet->mii_addr = ((reg << MII_ADDR_REG_SHIFT) |
+ (phy << MII_ADDR_PHY_SHIFT) |
+ MII_ADDR_WRITE);
+}
+
diff --git a/target/linux/atheros-2.6/files/drivers/net/ar2313/ar2313.h b/target/linux/atheros-2.6/files/drivers/net/ar2313/ar2313.h
new file mode 100644
index 0000000000..3606bd7a2a
--- /dev/null
+++ b/target/linux/atheros-2.6/files/drivers/net/ar2313/ar2313.h
@@ -0,0 +1,191 @@
+#ifndef _AR2313_H_
+#define _AR2313_H_
+
+#include <linux/autoconf.h>
+#include <asm/bootinfo.h>
+#include "platform.h"
+
+extern unsigned long mips_machtype;
+
+#undef ETHERNET_BASE
+#define ETHERNET_BASE ar_eth_base
+#define ETHERNET_SIZE 0x00100000
+#define ETHERNET_MACS 2
+
+#undef DMA_BASE
+#define DMA_BASE ar_dma_base
+#define DMA_SIZE 0x00100000
+
+
+/*
+ * probe link timer - 5 secs
+ */
+#define LINK_TIMER (5*HZ)
+
+/*
+ * Interrupt register base address
+ */
+#define INTERRUPT_BASE PHYS_TO_K1(ar_int_base)
+
+/*
+ * Reset Register
+ */
+#define AR531X_RESET (AR531X_RESETTMR + 0x0020)
+#define RESET_SYSTEM 0x00000001 /* cold reset full system */
+#define RESET_PROC 0x00000002 /* cold reset MIPS core */
+#define RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */
+#define RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
+#define RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
+#define RESET_ENET0 0x00000020 /* cold reset ENET0 mac */
+#define RESET_ENET1 0x00000040 /* cold reset ENET1 mac */
+
+#define IS_DMA_TX_INT(X) (((X) & (DMA_STATUS_TI)) != 0)
+#define IS_DMA_RX_INT(X) (((X) & (DMA_STATUS_RI)) != 0)
+#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN)) == 0)
+
+#ifndef K1_TO_PHYS
+// hack
+#define K1_TO_PHYS(x) (((unsigned int)(x)) & 0x1FFFFFFF) /* kseg1 to physical */
+#endif
+
+#ifndef PHYS_TO_K1
+// hack
+#define PHYS_TO_K1(x) (((unsigned int)(x)) | 0xA0000000) /* physical to kseg1 */
+#endif
+
+#define AR2313_TX_TIMEOUT (HZ/4)
+
+/*
+ * Rings
+ */
+#define DSC_RING_ENTRIES_SIZE (AR2313_DESCR_ENTRIES * sizeof(struct desc))
+#define DSC_NEXT(idx) ((idx + 1) & (AR2313_DESCR_ENTRIES - 1))
+
+static inline int tx_space (u32 csm, u32 prd)
+{
+ return (csm - prd - 1) & (AR2313_DESCR_ENTRIES - 1);
+}
+
+#if MAX_SKB_FRAGS
+#define TX_RESERVED (MAX_SKB_FRAGS+1) /* +1 for message header */
+#define tx_ring_full(csm, prd) (tx_space(csm, prd) <= TX_RESERVED)
+#else
+#define tx_ring_full 0
+#endif
+
+#define AR2313_MBGET 2
+#define AR2313_MBSET 3
+#define AR2313_PCI_RECONFIG 4
+#define AR2313_PCI_DUMP 5
+#define AR2313_TEST_PANIC 6
+#define AR2313_TEST_NULLPTR 7
+#define AR2313_READ_DATA 8
+#define AR2313_WRITE_DATA 9
+#define AR2313_GET_VERSION 10
+#define AR2313_TEST_HANG 11
+#define AR2313_SYNC 12
+
+
+struct ar2313_cmd {
+ u32 cmd;
+ u32 address; /* virtual address of image */
+ u32 length; /* size of image to download */
+ u32 mailbox; /* mailbox to get/set */
+ u32 data[2]; /* contents of mailbox to read/write */
+};
+
+
+/*
+ * Struct private for the Sibyte.
+ *
+ * Elements are grouped so variables used by the tx handling goes
+ * together, and will go into the same cache lines etc. in order to
+ * avoid cache line contention between the rx and tx handling on SMP.
+ *
+ * Frequently accessed variables are put at the beginning of the
+ * struct to help the compiler generate better/shorter code.
+ */
+struct ar2313_private
+{
+ struct net_device *dev;
+ int version;
+ u32 mb[2];
+
+ volatile ETHERNET_STRUCT *eth_regs;
+ volatile DMA *dma_regs;
+ volatile u32 *int_regs;
+
+ spinlock_t lock; /* Serialise access to device */
+
+ /*
+ * RX and TX descriptors, must be adjacent
+ */
+ ar2313_descr_t *rx_ring;
+ ar2313_descr_t *tx_ring;
+
+
+ struct sk_buff **rx_skb;
+ struct sk_buff **tx_skb;
+
+ /*
+ * RX elements
+ */
+ u32 rx_skbprd;
+ u32 cur_rx;
+
+ /*
+ * TX elements
+ */
+ u32 tx_prd;
+ u32 tx_csm;
+
+ /*
+ * Misc elements
+ */
+ int board_idx;
+ char name[48];
+ struct net_device_stats stats;
+ struct {
+ u32 address;
+ u32 length;
+ char *mapping;
+ } desc;
+
+
+ struct timer_list link_timer;
+ unsigned short phy; /* merlot phy = 1, samsung phy = 0x1f */
+ unsigned short mac;
+ unsigned short link; /* 0 - link down, 1 - link up */
+ u16 phyData;
+
+ struct tasklet_struct rx_tasklet;
+ int unloading;
+};
+
+
+/*
+ * Prototypes
+ */
+static int ar2313_init(struct net_device *dev);
+#ifdef TX_TIMEOUT
+static void ar2313_tx_timeout(struct net_device *dev);
+#endif
+#if 0
+static void ar2313_multicast_list(struct net_device *dev);
+#endif
+static int ar2313_restart(struct net_device *dev);
+#if DEBUG
+static void ar2313_dump_regs(struct net_device *dev);
+#endif
+static void ar2313_load_rx_ring(struct net_device *dev, int bufs);
+static irqreturn_t ar2313_interrupt(int irq, void *dev_id);
+static int ar2313_open(struct net_device *dev);
+static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static int ar2313_close(struct net_device *dev);
+static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
+static void ar2313_init_cleanup(struct net_device *dev);
+static int ar2313_setup_timer(struct net_device *dev);
+static void ar2313_link_timer_fn(unsigned long data);
+static void ar2313_check_link(struct net_device *dev);
+static struct net_device_stats *ar2313_get_stats(struct net_device *dev);
+#endif /* _AR2313_H_ */
diff --git a/target/linux/atheros-2.6/files/drivers/net/ar2313/ar2313_msg.h b/target/linux/atheros-2.6/files/drivers/net/ar2313/ar2313_msg.h
new file mode 100644
index 0000000000..d10d9eadee
--- /dev/null
+++ b/target/linux/atheros-2.6/files/drivers/net/ar2313/ar2313_msg.h
@@ -0,0 +1,17 @@
+#ifndef _AR2313_MSG_H_
+#define _AR2313_MSG_H_
+
+#define AR2313_MTU 1692
+#define AR2313_PRIOS 1
+#define AR2313_QUEUES (2*AR2313_PRIOS)
+
+#define AR2313_DESCR_ENTRIES 64
+
+typedef struct {
+ volatile unsigned int status; // OWN, Device control and status.
+ volatile unsigned int devcs; // pkt Control bits + Length
+ volatile unsigned int addr; // Current Address.
+ volatile unsigned int descr; // Next descriptor in chain.
+} ar2313_descr_t;
+
+#endif /* _AR2313_MSG_H_ */
diff --git a/target/linux/atheros-2.6/files/drivers/net/ar2313/dma.h b/target/linux/atheros-2.6/files/drivers/net/ar2313/dma.h
new file mode 100644
index 0000000000..2f8c06af50
--- /dev/null
+++ b/target/linux/atheros-2.6/files/drivers/net/ar2313/dma.h
@@ -0,0 +1,135 @@
+#ifndef __ARUBA_DMA_H__
+#define __ARUBA_DMA_H__
+
+/*******************************************************************************
+ *
+ * Copyright 2002 Integrated Device Technology, Inc.
+ * All rights reserved.
+ *
+ * DMA register definition.
+ *
+ * File : $Id: dma.h,v 1.3 2002/06/06 18:34:03 astichte Exp $
+ *
+ * Author : ryan.holmQVist@idt.com
+ * Date : 20011005
+ * Update :
+ * $Log: dma.h,v $
+ * Revision 1.3 2002/06/06 18:34:03 astichte
+ * Added XXX_PhysicalAddress and XXX_VirtualAddress
+ *
+ * Revision 1.2 2002/06/05 18:30:46 astichte
+ * Removed IDTField
+ *
+ * Revision 1.1 2002/05/29 17:33:21 sysarch
+ * jba File moved from vcode/include/idt/acacia
+ *
+ *
+ ******************************************************************************/
+
+#define AR_BIT(x) (1 << (x))
+#define DMA_RX_ERR_CRC AR_BIT(1)
+#define DMA_RX_ERR_DRIB AR_BIT(2)
+#define DMA_RX_ERR_MII AR_BIT(3)
+#define DMA_RX_EV2 AR_BIT(5)
+#define DMA_RX_ERR_COL AR_BIT(6)
+#define DMA_RX_LONG AR_BIT(7)
+#define DMA_RX_LS AR_BIT(8) /* last descriptor */
+#define DMA_RX_FS AR_BIT(9) /* first descriptor */
+#define DMA_RX_MF AR_BIT(10) /* multicast frame */
+#define DMA_RX_ERR_RUNT AR_BIT(11) /* runt frame */
+#define DMA_RX_ERR_LENGTH AR_BIT(12) /* length error */
+#define DMA_RX_ERR_DESC AR_BIT(14) /* descriptor error */
+#define DMA_RX_ERROR AR_BIT(15) /* error summary */
+#define DMA_RX_LEN_MASK 0x3fff0000
+#define DMA_RX_LEN_SHIFT 16
+#define DMA_RX_FILT AR_BIT(30)
+#define DMA_RX_OWN AR_BIT(31) /* desc owned by DMA controller */
+
+#define DMA_RX1_BSIZE_MASK 0x000007ff
+#define DMA_RX1_BSIZE_SHIFT 0
+#define DMA_RX1_CHAINED AR_BIT(24)
+#define DMA_RX1_RER AR_BIT(25)
+
+#define DMA_TX_ERR_UNDER AR_BIT(1) /* underflow error */
+#define DMA_TX_ERR_DEFER AR_BIT(2) /* excessive deferral */
+#define DMA_TX_COL_MASK 0x78
+#define DMA_TX_COL_SHIFT 3
+#define DMA_TX_ERR_HB AR_BIT(7) /* hearbeat failure */
+#define DMA_TX_ERR_COL AR_BIT(8) /* excessive collisions */
+#define DMA_TX_ERR_LATE AR_BIT(9) /* late collision */
+#define DMA_TX_ERR_LINK AR_BIT(10) /* no carrier */
+#define DMA_TX_ERR_LOSS AR_BIT(11) /* loss of carrier */
+#define DMA_TX_ERR_JABBER AR_BIT(14) /* transmit jabber timeout */
+#define DMA_TX_ERROR AR_BIT(15) /* frame aborted */
+#define DMA_TX_OWN AR_BIT(31) /* descr owned by DMA controller */
+
+#define DMA_TX1_BSIZE_MASK 0x000007ff
+#define DMA_TX1_BSIZE_SHIFT 0
+#define DMA_TX1_CHAINED AR_BIT(24) /* chained descriptors */
+#define DMA_TX1_TER AR_BIT(25) /* transmit end of ring */
+#define DMA_TX1_FS AR_BIT(29) /* first segment */
+#define DMA_TX1_LS AR_BIT(30) /* last segment */
+#define DMA_TX1_IC AR_BIT(31) /* interrupt on completion */
+
+#define RCVPKT_LENGTH(X) (X >> 16) /* Received pkt Length */
+
+#define MAC_CONTROL_RE AR_BIT(2) /* receive enable */
+#define MAC_CONTROL_TE AR_BIT(3) /* transmit enable */
+#define MAC_CONTROL_DC AR_BIT(5) /* Deferral check*/
+#define MAC_CONTROL_ASTP AR_BIT(8) /* Auto pad strip */
+#define MAC_CONTROL_DRTY AR_BIT(10) /* Disable retry */
+#define MAC_CONTROL_DBF AR_BIT(11) /* Disable bcast frames */
+#define MAC_CONTROL_LCC AR_BIT(12) /* late collision ctrl */
+#define MAC_CONTROL_HP AR_BIT(13) /* Hash Perfect filtering */
+#define MAC_CONTROL_HASH AR_BIT(14) /* Unicast hash filtering */
+#define MAC_CONTROL_HO AR_BIT(15) /* Hash only filtering */
+#define MAC_CONTROL_PB AR_BIT(16) /* Pass Bad frames */
+#define MAC_CONTROL_IF AR_BIT(17) /* Inverse filtering */
+#define MAC_CONTROL_PR AR_BIT(18) /* promiscuous mode (valid frames only) */
+#define MAC_CONTROL_PM AR_BIT(19) /* pass multicast */
+#define MAC_CONTROL_F AR_BIT(20) /* full-duplex */
+#define MAC_CONTROL_DRO AR_BIT(23) /* Disable Receive Own */
+#define MAC_CONTROL_HBD AR_BIT(28) /* heart-beat disabled (MUST BE SET) */
+#define MAC_CONTROL_BLE AR_BIT(30) /* big endian mode */
+#define MAC_CONTROL_RA AR_BIT(31) /* receive all (valid and invalid frames) */
+
+#define MII_ADDR_BUSY AR_BIT(0)
+#define MII_ADDR_WRITE AR_BIT(1)
+#define MII_ADDR_REG_SHIFT 6
+#define MII_ADDR_PHY_SHIFT 11
+#define MII_DATA_SHIFT 0
+
+#define FLOW_CONTROL_FCE AR_BIT(1)
+
+#define DMA_BUS_MODE_SWR AR_BIT(0) /* software reset */
+#define DMA_BUS_MODE_BLE AR_BIT(7) /* big endian mode */
+#define DMA_BUS_MODE_PBL_SHIFT 8 /* programmable burst length 32 */
+#define DMA_BUS_MODE_DBO AR_BIT(20) /* big-endian descriptors */
+
+#define DMA_STATUS_TI AR_BIT(0) /* transmit interrupt */
+#define DMA_STATUS_TPS AR_BIT(1) /* transmit process stopped */
+#define DMA_STATUS_TU AR_BIT(2) /* transmit buffer unavailable */
+#define DMA_STATUS_TJT AR_BIT(3) /* transmit buffer timeout */
+#define DMA_STATUS_UNF AR_BIT(5) /* transmit underflow */
+#define DMA_STATUS_RI AR_BIT(6) /* receive interrupt */
+#define DMA_STATUS_RU AR_BIT(7) /* receive buffer unavailable */
+#define DMA_STATUS_RPS AR_BIT(8) /* receive process stopped */
+#define DMA_STATUS_ETI AR_BIT(10) /* early transmit interrupt */
+#define DMA_STATUS_FBE AR_BIT(13) /* fatal bus interrupt */
+#define DMA_STATUS_ERI AR_BIT(14) /* early receive interrupt */
+#define DMA_STATUS_AIS AR_BIT(15) /* abnormal interrupt summary */
+#define DMA_STATUS_NIS AR_BIT(16) /* normal interrupt summary */
+#define DMA_STATUS_RS_SHIFT 17 /* receive process state */
+#define DMA_STATUS_TS_SHIFT 20 /* transmit process state */
+#define DMA_STATUS_EB_SHIFT 23 /* error bits */
+
+#define DMA_CONTROL_SR AR_BIT(1) /* start receive */
+#define DMA_CONTROL_ST AR_BIT(13) /* start transmit */
+#define DMA_CONTROL_SF AR_BIT(21) /* store and forward */
+
+#endif // __ARUBA_DMA_H__
+
+
+
+
+
diff --git a/target/linux/atheros-2.6/files/drivers/net/ar2313/platform.h b/target/linux/atheros-2.6/files/drivers/net/ar2313/platform.h
new file mode 100644
index 0000000000..67d8f5c08c
--- /dev/null
+++ b/target/linux/atheros-2.6/files/drivers/net/ar2313/platform.h
@@ -0,0 +1,128 @@
+/********************************************************************************
+ Title: $Source: platform.h,v $
+
+ Author: Dan Steinberg
+ Copyright Integrated Device Technology 2001
+
+ Purpose: AR2313 Register/Bit Definitions
+
+ Update:
+ $Log: platform.h,v $
+
+ Notes: See Merlot architecture spec for complete details. Note, all
+ addresses are virtual addresses in kseg1 (Uncached, Unmapped).
+
+********************************************************************************/
+
+#ifndef PLATFORM_H
+#define PLATFORM_H
+
+#define BIT(x) (1 << (x))
+
+#define RESET_BASE 0xBC003020
+#define RESET_VALUE 0x00000001
+
+/********************************************************************
+ * Device controller
+ ********************************************************************/
+typedef struct {
+ volatile unsigned int flash0;
+} DEVICE;
+
+#define device (*((volatile DEVICE *) DEV_CTL_BASE))
+
+// DDRC register
+#define DEV_WP (1<<26)
+
+/********************************************************************
+ * DDR controller
+ ********************************************************************/
+typedef struct {
+ volatile unsigned int ddrc0;
+ volatile unsigned int ddrc1;
+ volatile unsigned int ddrrefresh;
+} DDR;
+
+#define ddr (*((volatile DDR *) DDR_BASE))
+
+// DDRC register
+#define DDRC_CS(i) ((i&0x3)<<0)
+#define DDRC_WE (1<<2)
+
+/********************************************************************
+ * Ethernet interfaces
+ ********************************************************************/
+#define ETHERNET_BASE 0xB8200000
+
+//
+// New Combo structure for Both Eth0 AND eth1
+//
+typedef struct {
+ volatile unsigned int mac_control; /* 0x00 */
+ volatile unsigned int mac_addr[2]; /* 0x04 - 0x08*/
+ volatile unsigned int mcast_table[2]; /* 0x0c - 0x10 */
+ volatile unsigned int mii_addr; /* 0x14 */
+ volatile unsigned int mii_data; /* 0x18 */
+ volatile unsigned int flow_control; /* 0x1c */
+ volatile unsigned int vlan_tag; /* 0x20 */
+ volatile unsigned int pad[7]; /* 0x24 - 0x3c */
+ volatile unsigned int ucast_table[8]; /* 0x40-0x5c */
+
+} ETHERNET_STRUCT;
+
+/********************************************************************
+ * Interrupt controller
+ ********************************************************************/
+
+typedef struct {
+ volatile unsigned int wdog_control; /* 0x08 */
+ volatile unsigned int wdog_timer; /* 0x0c */
+ volatile unsigned int misc_status; /* 0x10 */
+ volatile unsigned int misc_mask; /* 0x14 */
+ volatile unsigned int global_status; /* 0x18 */
+ volatile unsigned int reserved; /* 0x1c */
+ volatile unsigned int reset_control; /* 0x20 */
+} INTERRUPT;
+
+#define interrupt (*((volatile INTERRUPT *) INTERRUPT_BASE))
+
+#define INTERRUPT_MISC_TIMER BIT(0)
+#define INTERRUPT_MISC_AHBPROC BIT(1)
+#define INTERRUPT_MISC_AHBDMA BIT(2)
+#define INTERRUPT_MISC_GPIO BIT(3)
+#define INTERRUPT_MISC_UART BIT(4)
+#define INTERRUPT_MISC_UARTDMA BIT(5)
+#define INTERRUPT_MISC_WATCHDOG BIT(6)
+#define INTERRUPT_MISC_LOCAL BIT(7)
+
+#define INTERRUPT_GLOBAL_ETH BIT(2)
+#define INTERRUPT_GLOBAL_WLAN BIT(3)
+#define INTERRUPT_GLOBAL_MISC BIT(4)
+#define INTERRUPT_GLOBAL_ITIMER BIT(5)
+
+/********************************************************************
+ * DMA controller
+ ********************************************************************/
+#define DMA_BASE 0xB8201000
+
+typedef struct {
+ volatile unsigned int bus_mode; /* 0x00 (CSR0) */
+ volatile unsigned int xmt_poll; /* 0x04 (CSR1) */
+ volatile unsigned int rcv_poll; /* 0x08 (CSR2) */
+ volatile unsigned int rcv_base; /* 0x0c (CSR3) */
+ volatile unsigned int xmt_base; /* 0x10 (CSR4) */
+ volatile unsigned int status; /* 0x14 (CSR5) */
+ volatile unsigned int control; /* 0x18 (CSR6) */
+ volatile unsigned int intr_ena; /* 0x1c (CSR7) */
+ volatile unsigned int rcv_missed; /* 0x20 (CSR8) */
+ volatile unsigned int reserved[11]; /* 0x24-0x4c (CSR9-19) */
+ volatile unsigned int cur_tx_buf_addr; /* 0x50 (CSR20) */
+ volatile unsigned int cur_rx_buf_addr; /* 0x50 (CSR21) */
+} DMA;
+
+#define dma (*((volatile DMA *) DMA_BASE))
+
+// macro to convert from virtual to physical address
+#define phys_addr(x) (x & 0x1fffffff)
+
+#endif /* PLATFORM_H */
diff --git a/target/linux/atheros-2.6/files/include/asm-mips/mach-atheros/ar531x_platform.h b/target/linux/atheros-2.6/files/include/asm-mips/mach-atheros/ar531x_platform.h
new file mode 100644
index 0000000000..377b31a266
--- /dev/null
+++ b/target/linux/atheros-2.6/files/include/asm-mips/mach-atheros/ar531x_platform.h
@@ -0,0 +1,26 @@
+#ifndef __AR531X_PLATFORM_H
+#define __AR531X_PLATFORM_H
+
+/*
+ * Board support data. The driver is required to locate
+ * and fill-in this information before passing a reference to
+ * this structure as the HAL_BUS_TAG parameter supplied to
+ * ath_hal_attach.
+ */
+struct ar531x_config {
+ const char *board; /* board config data */
+ const char *radio; /* radio config data */
+ int unit; /* unit number [0, 1] */
+ u32 tag; /* used as devid for now */
+};
+
+struct ar531x_eth {
+ int phy;
+ int mac;
+ u32 reset_base;
+ u32 reset_mac;
+ u32 reset_phy;
+ char *board_config;
+};
+
+#endif /* __AR531X_PLATFORM_H */
diff --git a/target/linux/atheros-2.6/patches/100-board.patch b/target/linux/atheros-2.6/patches/100-board.patch
index 040a28faf2..a137d15d20 100644
--- a/target/linux/atheros-2.6/patches/100-board.patch
+++ b/target/linux/atheros-2.6/patches/100-board.patch
@@ -1,1926 +1,63 @@
-diff -urN linux.old/arch/mips/ar531x/ar531x.h linux.dev/arch/mips/ar531x/ar531x.h
---- linux.old/arch/mips/ar531x/ar531x.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar531x/ar531x.h 2006-12-16 03:51:47.000000000 +0100
-@@ -0,0 +1,734 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+#ifndef AR531X_H
-+#define AR531X_H 1
-+
-+/*
-+ * Address map
-+ */
-+#define AR5315_SDRAM0 0x00000000 /* DRAM */
-+#define AR5315_SPI_READ 0x08000000 /* SPI FLASH */
-+#define AR5315_WLAN0 0xB0000000 /* Wireless MMR */
-+#define AR5315_PCI 0xB0100000 /* PCI MMR */
-+#define AR5315_SDRAMCTL 0xB0300000 /* SDRAM MMR */
-+#define AR5315_LOCAL 0xB0400000 /* LOCAL BUS MMR */
-+#define AR5315_ENET0 0xB0500000 /* ETHERNET MMR */
-+#define AR5315_DSLBASE 0xB1000000 /* RESET CONTROL MMR */
-+#define AR5315_UART0 0xB1100003 /* UART MMR */
-+#define AR5315_SPI 0xB1300000 /* SPI FLASH MMR */
-+#define AR5315_FLASHBT 0xBfc00000 /* ro boot alias to FLASH */
-+#define AR5315_RAM1 0x40000000 /* ram alias */
-+#define AR5315_PCIEXT 0x80000000 /* pci external */
-+#define AR5315_RAM2 0xc0000000 /* ram alias */
-+#define AR5315_RAM3 0xe0000000 /* ram alias */
-+
-+/*
-+ * Reset Register
-+ */
-+#define AR5315_COLD_RESET (AR5315_DSLBASE + 0x0000)
-+
-+/* Cold Reset */
-+#define RESET_COLD_AHB 0x00000001
-+#define RESET_COLD_APB 0x00000002
-+#define RESET_COLD_CPU 0x00000004
-+#define RESET_COLD_CPUWARM 0x00000008
-+#define RESET_SYSTEM (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB) /* full system */
-+
-+#define AR5317_RESET_SYSTEM 0x00000010
-+
-+/* Warm Reset */
-+
-+#define AR5315_RESET (AR5315_DSLBASE + 0x0004)
-+
-+#define RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */
-+#define RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BaseBand */
-+#define RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */
-+#define RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */
-+#define RESET_MEMCTL 0x00000010 /* warm reset memory controller */
-+#define RESET_LOCAL 0x00000020 /* warm reset local bus */
-+#define RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */
-+#define RESET_SPI 0x00000080 /* warm reset SPI interface */
-+#define RESET_UART0 0x00000100 /* warm reset UART0 */
-+#define RESET_IR_RSVD 0x00000200 /* warm reset IR interface */
-+#define RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */
-+#define RESET_ENET0 0x00000800 /* cold reset ENET0 mac */
-+
-+/*
-+ * AHB master arbitration control
-+ */
-+#define AR5315_AHB_ARB_CTL (AR5315_DSLBASE + 0x0008)
-+
-+#define ARB_CPU 0x00000001 /* CPU, default */
-+#define ARB_WLAN 0x00000002 /* WLAN */
-+#define ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */
-+#define ARB_LOCAL 0x00000008 /* LOCAL */
-+#define ARB_PCI 0x00000010 /* PCI */
-+#define ARB_ETHERNET 0x00000020 /* Ethernet */
-+#define ARB_RETRY 0x00000100 /* retry policy, debug only */
-+
-+/*
-+ * Config Register
-+ */
-+#define AR5315_ENDIAN_CTL (AR5315_DSLBASE + 0x000c)
-+
-+#define CONFIG_AHB 0x00000001 /* EC - AHB bridge endianess */
-+#define CONFIG_WLAN 0x00000002 /* WLAN byteswap */
-+#define CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */
-+#define CONFIG_PCI 0x00000008 /* PCI byteswap */
-+#define CONFIG_MEMCTL 0x00000010 /* Memory controller endianess */
-+#define CONFIG_LOCAL 0x00000020 /* Local bus byteswap */
-+#define CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */
-+
-+#define CONFIG_MERGE 0x00000200 /* CPU write buffer merge */
-+#define CONFIG_CPU 0x00000400 /* CPU big endian */
-+#define CONFIG_PCIAHB 0x00000800
-+#define CONFIG_PCIAHB_BRIDGE 0x00001000
-+#define CONFIG_SPI 0x00008000 /* SPI byteswap */
-+#define CONFIG_CPU_DRAM 0x00010000
-+#define CONFIG_CPU_PCI 0x00020000
-+#define CONFIG_CPU_MMR 0x00040000
-+#define CONFIG_BIG 0x00000400
-+
-+
-+/*
-+ * NMI control
-+ */
-+#define AR5315_NMI_CTL (AR5315_DSLBASE + 0x0010)
-+
-+#define NMI_EN 1
-+
-+/*
-+ * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0).
-+ */
-+#define AR5315_SREV (AR5315_DSLBASE + 0x0014)
-+
-+#define REV_MAJ 0x00f0
-+#define REV_MAJ_S 4
-+#define REV_MIN 0x000f
-+#define REV_MIN_S 0
-+#define REV_CHIP (REV_MAJ|REV_MIN)
-+
-+/*
-+ * Interface Enable
-+ */
-+#define AR5315_IF_CTL (AR5315_DSLBASE + 0x0018)
-+
-+#define IF_MASK 0x00000007
-+#define IF_DISABLED 0
-+#define IF_PCI 1
-+#define IF_TS_LOCAL 2
-+#define IF_ALL 3 /* only for emulation with separate pins */
-+#define IF_LOCAL_HOST 0x00000008
-+#define IF_PCI_HOST 0x00000010
-+#define IF_PCI_INTR 0x00000020
-+#define IF_PCI_CLK_MASK 0x00030000
-+#define IF_PCI_CLK_INPUT 0
-+#define IF_PCI_CLK_OUTPUT_LOW 1
-+#define IF_PCI_CLK_OUTPUT_CLK 2
-+#define IF_PCI_CLK_OUTPUT_HIGH 3
-+#define IF_PCI_CLK_SHIFT 16
-+
-+
-+/* Major revision numbers, bits 7..4 of Revision ID register */
-+#define REV_MAJ_AR5311 0x01
-+#define REV_MAJ_AR5312 0x04
-+#define REV_MAJ_AR5315 0x0B
-+
-+/*
-+ * APB Interrupt control
-+ */
-+
-+#define AR5315_ISR (AR5315_DSLBASE + 0x0020)
-+#define AR5315_IMR (AR5315_DSLBASE + 0x0024)
-+#define AR5315_GISR (AR5315_DSLBASE + 0x0028)
-+
-+#define ISR_UART0 0x0001 /* high speed UART */
-+#define ISR_I2C_RSVD 0x0002 /* I2C bus */
-+#define ISR_SPI 0x0004 /* SPI bus */
-+#define ISR_AHB 0x0008 /* AHB error */
-+#define ISR_APB 0x0010 /* APB error */
-+#define ISR_TIMER 0x0020 /* timer */
-+#define ISR_GPIO 0x0040 /* GPIO */
-+#define ISR_WD 0x0080 /* watchdog */
-+#define ISR_IR_RSVD 0x0100 /* IR */
-+
-+#define IMR_UART0 ISR_UART0
-+#define IMR_I2C_RSVD ISR_I2C_RSVD
-+#define IMR_SPI ISR_SPI
-+#define IMR_AHB ISR_AHB
-+#define IMR_APB ISR_APB
-+#define IMR_TIMER ISR_TIMER
-+#define IMR_GPIO ISR_GPIO
-+#define IMR_WD ISR_WD
-+#define IMR_IR_RSVD ISR_IR_RSVD
-+
-+#define GISR_MISC 0x0001
-+#define GISR_WLAN0 0x0002
-+#define GISR_MPEGTS_RSVD 0x0004
-+#define GISR_LOCALPCI 0x0008
-+#define GISR_WMACPOLL 0x0010
-+#define GISR_TIMER 0x0020
-+#define GISR_ETHERNET 0x0040
-+
-+/*
-+ * Interrupt routing from IO to the processor IP bits
-+ * Define our inter mask and level
-+ */
-+#define AR5315_INTR_MISCIO SR_IBIT3
-+#define AR5315_INTR_WLAN0 SR_IBIT4
-+#define AR5315_INTR_ENET0 SR_IBIT5
-+#define AR5315_INTR_LOCALPCI SR_IBIT6
-+#define AR5315_INTR_WMACPOLL SR_IBIT7
-+#define AR5315_INTR_COMPARE SR_IBIT8
-+
-+/*
-+ * Timers
-+ */
-+#define AR5315_TIMER (AR5315_DSLBASE + 0x0030)
-+#define AR5315_RELOAD (AR5315_DSLBASE + 0x0034)
-+#define AR5315_WD (AR5315_DSLBASE + 0x0038)
-+#define AR5315_WDC (AR5315_DSLBASE + 0x003c)
-+
-+#define WDC_RESET 0x00000002 /* reset on watchdog */
-+#define WDC_NMI 0x00000001 /* NMI on watchdog */
-+#define WDC_IGNORE_EXPIRATION 0x00000000
-+
-+/*
-+ * Interface Debug
-+ */
-+#define AR531X_FLASHDBG (AR531X_RESETTMR + 0x0040)
-+#define AR531X_MIIDBG (AR531X_RESETTMR + 0x0044)
-+
-+
-+/*
-+ * CPU Performance Counters
-+ */
-+#define AR5315_PERFCNT0 (AR5315_DSLBASE + 0x0048)
-+#define AR5315_PERFCNT1 (AR5315_DSLBASE + 0x004c)
-+
-+#define PERF_DATAHIT 0x0001 /* Count Data Cache Hits */
-+#define PERF_DATAMISS 0x0002 /* Count Data Cache Misses */
-+#define PERF_INSTHIT 0x0004 /* Count Instruction Cache Hits */
-+#define PERF_INSTMISS 0x0008 /* Count Instruction Cache Misses */
-+#define PERF_ACTIVE 0x0010 /* Count Active Processor Cycles */
-+#define PERF_WBHIT 0x0020 /* Count CPU Write Buffer Hits */
-+#define PERF_WBMISS 0x0040 /* Count CPU Write Buffer Misses */
-+
-+#define PERF_EB_ARDY 0x0001 /* Count EB_ARdy signal */
-+#define PERF_EB_AVALID 0x0002 /* Count EB_AValid signal */
-+#define PERF_EB_WDRDY 0x0004 /* Count EB_WDRdy signal */
-+#define PERF_EB_RDVAL 0x0008 /* Count EB_RdVal signal */
-+#define PERF_VRADDR 0x0010 /* Count valid read address cycles */
-+#define PERF_VWADDR 0x0020 /* Count valid write address cycles */
-+#define PERF_VWDATA 0x0040 /* Count valid write data cycles */
-+
-+/*
-+ * AHB Error Reporting.
-+ */
-+#define AR5315_AHB_ERR0 (AR5315_DSLBASE + 0x0050) /* error */
-+#define AR5315_AHB_ERR1 (AR5315_DSLBASE + 0x0054) /* haddr */
-+#define AR5315_AHB_ERR2 (AR5315_DSLBASE + 0x0058) /* hwdata */
-+#define AR5315_AHB_ERR3 (AR5315_DSLBASE + 0x005c) /* hrdata */
-+#define AR5315_AHB_ERR4 (AR5315_DSLBASE + 0x0060) /* status */
-+
-+#define AHB_ERROR_DET 1 /* AHB Error has been detected, */
-+ /* write 1 to clear all bits in ERR0 */
-+#define AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */
-+#define AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */
-+
-+#define PROCERR_HMAST 0x0000000f
-+#define PROCERR_HMAST_DFLT 0
-+#define PROCERR_HMAST_WMAC 1
-+#define PROCERR_HMAST_ENET 2
-+#define PROCERR_HMAST_PCIENDPT 3
-+#define PROCERR_HMAST_LOCAL 4
-+#define PROCERR_HMAST_CPU 5
-+#define PROCERR_HMAST_PCITGT 6
-+
-+#define PROCERR_HMAST_S 0
-+#define PROCERR_HWRITE 0x00000010
-+#define PROCERR_HSIZE 0x00000060
-+#define PROCERR_HSIZE_S 5
-+#define PROCERR_HTRANS 0x00000180
-+#define PROCERR_HTRANS_S 7
-+#define PROCERR_HBURST 0x00000e00
-+#define PROCERR_HBURST_S 9
-+
-+
-+
-+/*
-+ * Clock Control
-+ */
-+#define AR5315_PLLC_CTL (AR5315_DSLBASE + 0x0064)
-+#define AR5315_PLLV_CTL (AR5315_DSLBASE + 0x0068)
-+#define AR5315_CPUCLK (AR5315_DSLBASE + 0x006c)
-+#define AR5315_AMBACLK (AR5315_DSLBASE + 0x0070)
-+#define AR5315_SYNCCLK (AR5315_DSLBASE + 0x0074)
-+#define AR5315_DSL_SLEEP_CTL (AR5315_DSLBASE + 0x0080)
-+#define AR5315_DSL_SLEEP_DUR (AR5315_DSLBASE + 0x0084)
-+
-+/* PLLc Control fields */
-+#define PLLC_REF_DIV_M 0x00000003
-+#define PLLC_REF_DIV_S 0
-+#define PLLC_FDBACK_DIV_M 0x0000007C
-+#define PLLC_FDBACK_DIV_S 2
-+#define PLLC_ADD_FDBACK_DIV_M 0x00000080
-+#define PLLC_ADD_FDBACK_DIV_S 7
-+#define PLLC_CLKC_DIV_M 0x0001c000
-+#define PLLC_CLKC_DIV_S 14
-+#define PLLC_CLKM_DIV_M 0x00700000
-+#define PLLC_CLKM_DIV_S 20
-+
-+/* CPU CLK Control fields */
-+#define CPUCLK_CLK_SEL_M 0x00000003
-+#define CPUCLK_CLK_SEL_S 0
-+#define CPUCLK_CLK_DIV_M 0x0000000c
-+#define CPUCLK_CLK_DIV_S 2
-+
-+/* AMBA CLK Control fields */
-+#define AMBACLK_CLK_SEL_M 0x00000003
-+#define AMBACLK_CLK_SEL_S 0
-+#define AMBACLK_CLK_DIV_M 0x0000000c
-+#define AMBACLK_CLK_DIV_S 2
-+
-+#if defined(COBRA_EMUL)
-+#define AR5315_AMBA_CLOCK_RATE 20000000
-+#define AR5315_CPU_CLOCK_RATE 40000000
-+#else
-+#if defined(DEFAULT_PLL)
-+#define AR5315_AMBA_CLOCK_RATE 40000000
-+#define AR5315_CPU_CLOCK_RATE 40000000
-+#else
-+#define AR5315_AMBA_CLOCK_RATE 92000000
-+#define AR5315_CPU_CLOCK_RATE 184000000
-+#endif /* ! DEFAULT_PLL */
-+#endif /* ! COBRA_EMUL */
-+
-+#define AR5315_UART_CLOCK_RATE AR5315_AMBA_CLOCK_RATE
-+#define AR5315_SDRAM_CLOCK_RATE AR5315_AMBA_CLOCK_RATE
-+
-+/*
-+ * The UART computes baud rate as:
-+ * baud = clock / (16 * divisor)
-+ * where divisor is specified as a High Byte (DLM) and a Low Byte (DLL).
-+ */
-+#define DESIRED_BAUD_RATE 38400
-+
-+/*
-+ * The WATCHDOG value is computed as
-+ * 10 seconds * AR531X_WATCHDOG_CLOCK_RATE
-+ */
-+#define DESIRED_WATCHDOG_SECONDS 10
-+#define AR531X_WATCHDOG_TIME \
-+ (DESIRED_WATCHDOG_SECONDS * AR531X_WATCHDOG_CLOCK_RATE)
-+
-+
-+#define CLOCKCTL_UART0 0x0010 /* enable UART0 external clock */
-+
-+
-+ /*
-+ * Applicable "PCICFG" bits for WLAN(s). Assoc status and LED mode.
-+ */
-+#define AR531X_PCICFG (AR531X_RESETTMR + 0x00b0)
-+#define ASSOC_STATUS_M 0x00000003
-+#define ASSOC_STATUS_NONE 0
-+#define ASSOC_STATUS_PENDING 1
-+#define ASSOC_STATUS_ASSOCIATED 2
-+#define LED_MODE_M 0x0000001c
-+#define LED_BLINK_THRESHOLD_M 0x000000e0
-+#define LED_SLOW_BLINK_MODE 0x00000100
-+
-+/*
-+ * GPIO
-+ */
-+
-+#define AR5315_GPIO_DI (AR5315_DSLBASE + 0x0088)
-+#define AR5315_GPIO_DO (AR5315_DSLBASE + 0x0090)
-+#define AR5315_GPIO_CR (AR5315_DSLBASE + 0x0098)
-+#define AR5315_GPIO_INT (AR5315_DSLBASE + 0x00a0)
-+
-+#define GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
-+#define GPIO_CR_O(x) (1 << (x)) /* output */
-+#define GPIO_CR_I(x) (0 << (x)) /* input */
-+
-+#define GPIO_INT(x,Y) ((x) << (8 * (Y))) /* interrupt enable */
-+#define GPIO_INT_M(Y) ((0x3F) << (8 * (Y))) /* mask for int */
-+#define GPIO_INT_LVL(x,Y) ((x) << (8 * (Y) + 6)) /* interrupt level */
-+#define GPIO_INT_LVL_M(Y) ((0x3) << (8 * (Y) + 6)) /* mask for int level */
-+
-+#define AR5315_RESET_GPIO 5
-+#define AR5315_NUM_GPIO 22
-+
-+
-+/*
-+ * PCI Clock Control
-+ */
-+
-+#define AR5315_PCICLK (AR5315_DSLBASE + 0x00a4)
-+
-+#define PCICLK_INPUT_M 0x3
-+#define PCICLK_INPUT_S 0
-+
-+#define PCICLK_PLLC_CLKM 0
-+#define PCICLK_PLLC_CLKM1 1
-+#define PCICLK_PLLC_CLKC 2
-+#define PCICLK_REF_CLK 3
-+
-+#define PCICLK_DIV_M 0xc
-+#define PCICLK_DIV_S 2
-+
-+#define PCICLK_IN_FREQ 0
-+#define PCICLK_IN_FREQ_DIV_6 1
-+#define PCICLK_IN_FREQ_DIV_8 2
-+#define PCICLK_IN_FREQ_DIV_10 3
-+
-+/*
-+ * Observation Control Register
-+ */
-+#define AR5315_OCR (AR5315_DSLBASE + 0x00b0)
-+#define OCR_GPIO0_IRIN 0x0040
-+#define OCR_GPIO1_IROUT 0x0080
-+#define OCR_GPIO3_RXCLR 0x0200
-+
-+/*
-+ * General Clock Control
-+ */
-+
-+#define AR5315_MISCCLK (AR5315_DSLBASE + 0x00b4)
-+#define MISCCLK_PLLBYPASS_EN 0x00000001
-+#define MISCCLK_PROCREFCLK 0x00000002
-+
-+/*
-+ * SDRAM Controller
-+ * - No read or write buffers are included.
-+ */
-+#define AR5315_MEM_CFG (AR5315_SDRAMCTL + 0x00)
-+#define AR5315_MEM_CTRL (AR5315_SDRAMCTL + 0x0c)
-+#define AR5315_MEM_REF (AR5315_SDRAMCTL + 0x10)
-+
-+#define SDRAM_DATA_WIDTH_M 0x00006000
-+#define SDRAM_DATA_WIDTH_S 13
-+
-+#define SDRAM_COL_WIDTH_M 0x00001E00
-+#define SDRAM_COL_WIDTH_S 9
-+
-+#define SDRAM_ROW_WIDTH_M 0x000001E0
-+#define SDRAM_ROW_WIDTH_S 5
-+
-+#define SDRAM_BANKADDR_BITS_M 0x00000018
-+#define SDRAM_BANKADDR_BITS_S 3
-+
-+
-+/*
-+ * SDRAM Memory Refresh (MEM_REF) value is computed as:
-+ * MEMCTL_SREFR = (Tr * hclk_freq) / R
-+ * where Tr is max. time of refresh of any single row
-+ * R is number of rows in the DRAM
-+ * For most 133MHz SDRAM parts, Tr=64ms, R=4096 or 8192
-+ */
-+#if defined(COBRA_EMUL)
-+#define AR5315_SDRAM_MEMORY_REFRESH_VALUE 0x96
-+#else
-+#if defined(DEFAULT_PLL)
-+#define AR5315_SDRAM_MEMORY_REFRESH_VALUE 0x200
-+#else
-+#define AR5315_SDRAM_MEMORY_REFRESH_VALUE 0x61a
-+#endif /* ! DEFAULT_PLL */
-+#endif
-+
-+#define AR5315_SDRAM_DDR_SDRAM 0 /* Not DDR SDRAM */
-+#define AR5315_SDRAM_DATA_WIDTH 16
-+#define AR5315_SDRAM_COL_WIDTH 8
-+#define AR5315_SDRAM_ROW_WIDTH 12
-+
-+/*
-+ * SPI Flash Interface Registers
-+ */
-+
-+#define AR5315_SPI_CTL (AR5315_SPI + 0x00)
-+#define AR5315_SPI_OPCODE (AR5315_SPI + 0x04)
-+#define AR5315_SPI_DATA (AR5315_SPI + 0x08)
-+
-+#define SPI_CTL_START 0x00000100
-+#define SPI_CTL_BUSY 0x00010000
-+#define SPI_CTL_TXCNT_MASK 0x0000000f
-+#define SPI_CTL_RXCNT_MASK 0x000000f0
-+#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
-+#define SPI_CTL_SIZE_MASK 0x00060000
-+
-+#define SPI_CTL_CLK_SEL_MASK 0x03000000
-+#define SPI_OPCODE_MASK 0x000000ff
-+
-+/*
-+ * PCI-MAC Configuration registers
-+ */
-+#define PCI_MAC_RC (AR5315_PCI + 0x4000)
-+#define PCI_MAC_SCR (AR5315_PCI + 0x4004)
-+#define PCI_MAC_INTPEND (AR5315_PCI + 0x4008)
-+#define PCI_MAC_SFR (AR5315_PCI + 0x400C)
-+#define PCI_MAC_PCICFG (AR5315_PCI + 0x4010)
-+#define PCI_MAC_SREV (AR5315_PCI + 0x4020)
-+
-+#define PCI_MAC_RC_MAC 0x00000001
-+#define PCI_MAC_RC_BB 0x00000002
-+
-+#define PCI_MAC_SCR_SLMODE_M 0x00030000
-+#define PCI_MAC_SCR_SLMODE_S 16
-+#define PCI_MAC_SCR_SLM_FWAKE 0
-+#define PCI_MAC_SCR_SLM_FSLEEP 1
-+#define PCI_MAC_SCR_SLM_NORMAL 2
-+
-+#define PCI_MAC_SFR_SLEEP 0x00000001
-+
-+#define PCI_MAC_PCICFG_SPWR_DN 0x00010000
-+
-+
-+
-+
-+/*
-+ * PCI Bus Interface Registers
-+ */
-+#define AR5315_PCI_1MS_REG (AR5315_PCI + 0x0008)
-+#define AR5315_PCI_1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
-+
-+#define AR5315_PCI_MISC_CONFIG (AR5315_PCI + 0x000c)
-+#define AR5315_PCIMISC_TXD_EN 0x00000001 /* Enable TXD for fragments */
-+#define AR5315_PCIMISC_CFG_SEL 0x00000002 /* mem or config cycles */
-+#define AR5315_PCIMISC_GIG_MASK 0x0000000C /* bits 31-30 for pci req */
-+#define AR5315_PCIMISC_RST_MODE 0x00000030
-+#define AR5315_PCIRST_INPUT 0x00000000 /* 4:5=0 rst is input */
-+#define AR5315_PCIRST_LOW 0x00000010 /* 4:5=1 rst to GND */
-+#define AR5315_PCIRST_HIGH 0x00000020 /* 4:5=2 rst to VDD */
-+#define AR5315_PCIGRANT_EN 0x00000000 /* 6:7=0 early grant en */
-+#define AR5315_PCIGRANT_FRAME 0x00000040 /* 6:7=1 grant waits 4 frame */
-+#define AR5315_PCIGRANT_IDLE 0x00000080 /* 6:7=2 grant waits 4 idle */
-+#define AR5315_PCIGRANT_GAP 0x00000000 /* 6:7=2 grant waits 4 idle */
-+#define AR5315_PCICACHE_DIS 0x00001000 /* PCI external access cache disable */
-+
-+#define AR5315_PCI_OUT_TSTAMP (AR5315_PCI + 0x0010)
-+
-+#define AR5315_PCI_UNCACHE_CFG (AR5315_PCI + 0x0014)
-+
-+#define AR5315_PCI_IN_EN (AR5315_PCI + 0x0100)
-+#define AR5315_PCI_IN_EN0 0x01 /* Enable chain 0 */
-+#define AR5315_PCI_IN_EN1 0x02 /* Enable chain 1 */
-+#define AR5315_PCI_IN_EN2 0x04 /* Enable chain 2 */
-+#define AR5315_PCI_IN_EN3 0x08 /* Enable chain 3 */
-+
-+#define AR5315_PCI_IN_DIS (AR5315_PCI + 0x0104)
-+#define AR5315_PCI_IN_DIS0 0x01 /* Disable chain 0 */
-+#define AR5315_PCI_IN_DIS1 0x02 /* Disable chain 1 */
-+#define AR5315_PCI_IN_DIS2 0x04 /* Disable chain 2 */
-+#define AR5315_PCI_IN_DIS3 0x08 /* Disable chain 3 */
-+
-+#define AR5315_PCI_IN_PTR (AR5315_PCI + 0x0200)
-+
-+#define AR5315_PCI_OUT_EN (AR5315_PCI + 0x0400)
-+#define AR5315_PCI_OUT_EN0 0x01 /* Enable chain 0 */
-+
-+#define AR5315_PCI_OUT_DIS (AR5315_PCI + 0x0404)
-+#define AR5315_PCI_OUT_DIS0 0x01 /* Disable chain 0 */
-+
-+#define AR5315_PCI_OUT_PTR (AR5315_PCI + 0x0408)
-+
-+#define AR5315_PCI_INT_STATUS (AR5315_PCI + 0x0500) /* write one to clr */
-+#define AR5315_PCI_TXINT 0x00000001 /* Desc In Completed */
-+#define AR5315_PCI_TXOK 0x00000002 /* Desc In OK */
-+#define AR5315_PCI_TXERR 0x00000004 /* Desc In ERR */
-+#define AR5315_PCI_TXEOL 0x00000008 /* Desc In End-of-List */
-+#define AR5315_PCI_RXINT 0x00000010 /* Desc Out Completed */
-+#define AR5315_PCI_RXOK 0x00000020 /* Desc Out OK */
-+#define AR5315_PCI_RXERR 0x00000040 /* Desc Out ERR */
-+#define AR5315_PCI_RXEOL 0x00000080 /* Desc Out EOL */
-+#define AR5315_PCI_TXOOD 0x00000200 /* Desc In Out-of-Desc */
-+#define AR5315_PCI_MASK 0x0000FFFF /* Desc Mask */
-+#define AR5315_PCI_EXT_INT 0x02000000
-+#define AR5315_PCI_ABORT_INT 0x04000000
-+
-+#define AR5315_PCI_INT_MASK (AR5315_PCI + 0x0504) /* same as INT_STATUS */
-+
-+#define AR5315_PCI_INTEN_REG (AR5315_PCI + 0x0508)
-+#define AR5315_PCI_INT_DISABLE 0x00 /* disable pci interrupts */
-+#define AR5315_PCI_INT_ENABLE 0x01 /* enable pci interrupts */
-+
-+#define AR5315_PCI_HOST_IN_EN (AR5315_PCI + 0x0800)
-+#define AR5315_PCI_HOST_IN_DIS (AR5315_PCI + 0x0804)
-+#define AR5315_PCI_HOST_IN_PTR (AR5315_PCI + 0x0810)
-+#define AR5315_PCI_HOST_OUT_EN (AR5315_PCI + 0x0900)
-+#define AR5315_PCI_HOST_OUT_DIS (AR5315_PCI + 0x0904)
-+#define AR5315_PCI_HOST_OUT_PTR (AR5315_PCI + 0x0908)
-+
-+
-+/*
-+ * Local Bus Interface Registers
-+ */
-+#define AR5315_LB_CONFIG (AR5315_LOCAL + 0x0000)
-+#define AR5315_LBCONF_OE 0x00000001 /* =1 OE is low-true */
-+#define AR5315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */
-+#define AR5315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */
-+#define AR5315_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */
-+#define AR5315_LBCONF_WE 0x00000010 /* =1 Write En is low-true */
-+#define AR5315_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */
-+#define AR5315_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */
-+#define AR5315_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */
-+#define AR5315_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */
-+#define AR5315_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */
-+#define AR5315_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */
-+#define AR5315_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */
-+#define AR5315_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */
-+#define AR5315_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */
-+#define AR5315_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */
-+#define AR5315_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */
-+#define AR5315_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */
-+#define AR5315_LBCONF_INT 0x00020000 /* =1 Intr is low true */
-+#define AR5315_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */
-+#define AR5315_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */
-+#define AR5315_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */
-+#define AR5315_LBCONF_INT_CTR3 0x000C0000 /* GND drive, Vdd drive */
-+#define AR5315_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */
-+#define AR5315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */
-+#define AR5315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */
-+
-+#define AR5315_LB_CLKSEL (AR5315_LOCAL + 0x0004)
-+#define AR5315_LBCLK_EXT 0x0001 /* use external clk for lb */
-+
-+#define AR5315_LB_1MS (AR5315_LOCAL + 0x0008)
-+#define AR5315_LB1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
-+
-+#define AR5315_LB_MISCCFG (AR5315_LOCAL + 0x000C)
-+#define AR5315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */
-+#define AR5315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */
-+#define AR5315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */
-+#define AR5315_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */
-+#define AR5315_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */
-+#define AR5315_LBM_TIMEOUT_MASK 0x00FFFF80
-+#define AR5315_LBM_TIMEOUT_SHFT 7
-+#define AR5315_LBM_PORTMUX 0x07000000
-+
-+
-+#define AR5315_LB_RXTSOFF (AR5315_LOCAL + 0x0010)
-+
-+#define AR5315_LB_TX_CHAIN_EN (AR5315_LOCAL + 0x0100)
-+#define AR5315_LB_TXEN_0 0x01
-+#define AR5315_LB_TXEN_1 0x02
-+#define AR5315_LB_TXEN_2 0x04
-+#define AR5315_LB_TXEN_3 0x08
-+
-+#define AR5315_LB_TX_CHAIN_DIS (AR5315_LOCAL + 0x0104)
-+#define AR5315_LB_TX_DESC_PTR (AR5315_LOCAL + 0x0200)
-+
-+#define AR5315_LB_RX_CHAIN_EN (AR5315_LOCAL + 0x0400)
-+#define AR5315_LB_RXEN 0x01
-+
-+#define AR5315_LB_RX_CHAIN_DIS (AR5315_LOCAL + 0x0404)
-+#define AR5315_LB_RX_DESC_PTR (AR5315_LOCAL + 0x0408)
-+
-+#define AR5315_LB_INT_STATUS (AR5315_LOCAL + 0x0500)
-+#define AR5315_INT_TX_DESC 0x0001
-+#define AR5315_INT_TX_OK 0x0002
-+#define AR5315_INT_TX_ERR 0x0004
-+#define AR5315_INT_TX_EOF 0x0008
-+#define AR5315_INT_RX_DESC 0x0010
-+#define AR5315_INT_RX_OK 0x0020
-+#define AR5315_INT_RX_ERR 0x0040
-+#define AR5315_INT_RX_EOF 0x0080
-+#define AR5315_INT_TX_TRUNC 0x0100
-+#define AR5315_INT_TX_STARVE 0x0200
-+#define AR5315_INT_LB_TIMEOUT 0x0400
-+#define AR5315_INT_LB_ERR 0x0800
-+#define AR5315_INT_MBOX_WR 0x1000
-+#define AR5315_INT_MBOX_RD 0x2000
-+
-+/* Bit definitions for INT MASK are the same as INT_STATUS */
-+#define AR5315_LB_INT_MASK (AR5315_LOCAL + 0x0504)
-+
-+#define AR5315_LB_INT_EN (AR5315_LOCAL + 0x0508)
-+#define AR5315_LB_MBOX (AR5315_LOCAL + 0x0600)
-+
-+
-+
-+/*
-+ * IR Interface Registers
-+ */
-+#define AR5315_IR_PKTDATA (AR5315_IR + 0x0000)
-+
-+#define AR5315_IR_PKTLEN (AR5315_IR + 0x07fc) /* 0 - 63 */
-+
-+#define AR5315_IR_CONTROL (AR5315_IR + 0x0800)
-+#define AR5315_IRCTL_TX 0x00000000 /* use as tranmitter */
-+#define AR5315_IRCTL_RX 0x00000001 /* use as receiver */
-+#define AR5315_IRCTL_SAMPLECLK_MASK 0x00003ffe /* Sample clk divisor mask */
-+#define AR5315_IRCTL_SAMPLECLK_SHFT 1
-+#define AR5315_IRCTL_OUTPUTCLK_MASK 0x03ffc000 /* Output clk divisor mask */
-+#define AR5315_IRCTL_OUTPUTCLK_SHFT 14
-+
-+#define AR5315_IR_STATUS (AR5315_IR + 0x0804)
-+#define AR5315_IRSTS_RX 0x00000001 /* receive in progress */
-+#define AR5315_IRSTS_TX 0x00000002 /* transmit in progress */
-+
-+#define AR5315_IR_CONFIG (AR5315_IR + 0x0808)
-+#define AR5315_IRCFG_INVIN 0x00000001 /* invert input polarity */
-+#define AR5315_IRCFG_INVOUT 0x00000002 /* invert output polarity */
-+#define AR5315_IRCFG_SEQ_START_WIN_SEL 0x00000004 /* 1 => 28, 0 => 7 */
-+#define AR5315_IRCFG_SEQ_START_THRESH 0x000000f0 /* */
-+#define AR5315_IRCFG_SEQ_END_UNIT_SEL 0x00000100 /* */
-+#define AR5315_IRCFG_SEQ_END_UNIT_THRESH 0x00007e00 /* */
-+#define AR5315_IRCFG_SEQ_END_WIN_SEL 0x00008000 /* */
-+#define AR5315_IRCFG_SEQ_END_WIN_THRESH 0x001f0000 /* */
-+#define AR5315_IRCFG_NUM_BACKOFF_WORDS 0x01e00000 /* */
-+
-+/*
-+ * PCI memory constants: Memory area 1 and 2 are the same size -
-+ * (twice the PCI_TLB_PAGE_SIZE). The definition of
-+ * CPU_TO_PCI_MEM_SIZE is coupled with the TLB setup routine
-+ * sysLib.c/sysTlbInit(), in that it assumes that 2 pages of size
-+ * PCI_TLB_PAGE_SIZE are set up in the TLB for each PCI memory space.
-+ */
-+
-+#define CPU_TO_PCI_MEM_BASE1 0xE0000000
-+#define CPU_TO_PCI_MEM_SIZE1 (2*PCI_TLB_PAGE_SIZE)
-+
-+
-+/* TLB attributes for PCI transactions */
-+
-+#define PCI_MMU_PAGEMASK 0x00003FFF
-+#define MMU_PAGE_UNCACHED 0x00000010
-+#define MMU_PAGE_DIRTY 0x00000004
-+#define MMU_PAGE_VALID 0x00000002
-+#define MMU_PAGE_GLOBAL 0x00000001
-+#define PCI_MMU_PAGEATTRIB (MMU_PAGE_UNCACHED|MMU_PAGE_DIRTY|\
-+ MMU_PAGE_VALID|MMU_PAGE_GLOBAL)
-+#define PCI_MEMORY_SPACE1_VIRT 0xE0000000 /* Used for non-prefet mem */
-+#define PCI_MEMORY_SPACE1_PHYS 0x80000000
-+#define PCI_TLB_PAGE_SIZE 0x01000000
-+#define TLB_HI_MASK 0xFFFFE000
-+#define TLB_LO_MASK 0x3FFFFFFF
-+#define PAGEMASK_SHIFT 11
-+#define TLB_LO_SHIFT 6
-+
-+#define PCI_MAX_LATENCY 0xFFF /* Max PCI latency */
-+
-+#define HOST_PCI_DEV_ID 3
-+#define HOST_PCI_MBAR0 0x10000000
-+#define HOST_PCI_MBAR1 0x20000000
-+#define HOST_PCI_MBAR2 0x30000000
-+
-+#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1
-+#define PCI_DEVICE_MEM_SPACE 0x800000
-+
-+#define sysRegRead(phys) \
-+ (*(volatile u32 *)KSEG1ADDR(phys))
-+
-+#define sysRegWrite(phys, val) \
-+ ((*(volatile u32 *)KSEG1ADDR(phys)) = (val))
-+
-+#endif
-diff -urN linux.old/arch/mips/ar531x/ar531xlnx.h linux.dev/arch/mips/ar531x/ar531xlnx.h
---- linux.old/arch/mips/ar531x/ar531xlnx.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar531x/ar531xlnx.h 2006-12-16 04:49:36.000000000 +0100
-@@ -0,0 +1,74 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+/*
-+ * This file contains definitions needed in order to compile
-+ * AR531X products for linux. Definitions that are largely
-+ * AR531X-specific and independent of operating system belong
-+ * in ar531x.h rather than this file.
-+ */
-+#ifndef _AR531XLNX_H
-+#define _AR531XLNX_H
-+
-+#include "ar531x.h"
-+
-+/*
-+ * Board support data. The driver is required to locate
-+ * and fill-in this information before passing a reference to
-+ * this structure as the HAL_BUS_TAG parameter supplied to
-+ * ath_hal_attach.
-+ */
-+struct ar531x_config {
-+ const char *board; /* board config data */
-+ const char *radio; /* radio config data */
-+ int unit; /* unit number [0, 1] */
-+ u32 tag; /* used as devid for now */
-+};
-+
-+#define MIPS_CPU_IRQ_BASE 0x00
-+#define AR531X_HIGH_PRIO 0x10
-+#define AR531X_MISC_IRQ_BASE 0x20
-+#define AR531X_GPIO_IRQ_BASE 0x30
-+
-+/* Software's idea of interrupts handled by "CPU Interrupt Controller" */
-+#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0
-+#define AR531X_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
-+#define AR531X_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
-+#define AR531X_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
-+#define AR531X_IRQ_LCBUS_PCI MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
-+#define AR531X_IRQ_WLAN0_POLL MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
-+#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */
-+
-+/* Miscellaneous interrupts, which share IP6 */
-+#define AR531X_MISC_IRQ_NONE AR531X_MISC_IRQ_BASE+0
-+#define AR531X_MISC_IRQ_TIMER AR531X_MISC_IRQ_BASE+1
-+#define AR531X_MISC_IRQ_AHB_PROC AR531X_MISC_IRQ_BASE+2
-+#define AR531X_MISC_IRQ_AHB_DMA AR531X_MISC_IRQ_BASE+3
-+#define AR531X_MISC_IRQ_GPIO AR531X_MISC_IRQ_BASE+4
-+#define AR531X_MISC_IRQ_UART0 AR531X_MISC_IRQ_BASE+5
-+#define AR531X_MISC_IRQ_UART0_DMA AR531X_MISC_IRQ_BASE+6
-+#define AR531X_MISC_IRQ_WATCHDOG AR531X_MISC_IRQ_BASE+7
-+#define AR531X_MISC_IRQ_LOCAL AR531X_MISC_IRQ_BASE+8
-+#define AR531X_MISC_IRQ_COUNT 9
-+
-+/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */
-+#define AR531X_GPIO_IRQ_NONE AR531X_MISC_IRQ_BASE+0
-+#define AR531X_GPIO_IRQ(n) AR531X_MISC_IRQ_BASE+(n)+1
-+#define AR531X_GPIO_IRQ_COUNT 22
-+
-+extern struct ar531x_boarddata *ar531x_board_configuration;
-+extern char *ar531x_radio_configuration;
-+extern char *enet_mac_address_get(int MACUnit);
-+
-+#define A_DATA_CACHE_INVAL(start, length) \
-+ dma_cache_inv((UINT32)(start),(length))
-+
-+#endif /* _AR531XLNX_H */
-diff -urN linux.old/arch/mips/ar531x/devices.c linux.dev/arch/mips/ar531x/devices.c
---- linux.old/arch/mips/ar531x/devices.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar531x/devices.c 2006-12-16 04:46:43.000000000 +0100
-@@ -0,0 +1,281 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+/*
-+ * Platform devices for AR531x SoC.
-+ */
-+
-+#include <linux/autoconf.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/kernel.h>
-+#include <asm/io.h>
-+#include <ar531x_platform.h>
-+
-+#include "ar531xlnx.h"
-+
-+static struct resource ar531x_eth_res[] = {
-+ {
-+ .name = "eth_membase",
-+ .flags = IORESOURCE_MEM,
-+ .start = 0xb0500000,
-+ .end = 0xb0502000,
-+ },
-+ {
-+ .name = "eth_irq",
-+ .flags = IORESOURCE_IRQ,
-+ .start = 4,
-+ .end = 4,
-+ },
-+};
-+
-+static struct ar531x_eth ar531x_eth_data = {
-+ .phy = 1,
-+ .mac = 0,
-+ .reset_base = 0x11000004,
-+ .reset_mac = 0x800,
-+ .reset_phy = 0x400,
-+};
-+
-+static struct platform_device ar531x_eth = {
-+ .id = 0,
-+ .name = "ar531x-eth",
-+ .dev.platform_data = &ar531x_eth_data,
-+ .resource = ar531x_eth_res,
-+ .num_resources = ARRAY_SIZE(ar531x_eth_res)
-+};
-+
-+static struct platform_device ar531x_wmac = {
-+ .id = 0,
-+ .name = "ar531x-wmac",
-+ /* FIXME: add resources */
-+};
-+
-+static struct resource ar531x_spiflash_res[] = {
-+ {
-+ .name = "flash_base",
-+ .flags = IORESOURCE_MEM,
-+ .start = 0xa8000000,
-+ .end = 0xa8400000,
-+ },
-+ {
-+ .name = "flash_regs",
-+ .flags = IORESOURCE_MEM,
-+ .start = 0x11300000,
-+ .end = 0x11300012,
-+ },
-+};
-+
-+static struct platform_device ar531x_spiflash = {
-+ .id = 0,
-+ .name = "spiflash",
-+ .resource = ar531x_spiflash_res,
-+ .num_resources = ARRAY_SIZE(ar531x_spiflash_res)
-+};
-+
-+static __initdata struct platform_device *ar531x_devs[] = {
-+ &ar531x_eth,
-+ &ar531x_wmac,
-+ &ar531x_spiflash
-+};
-+
-+
-+
-+static void *flash_regs;
-+
-+static inline __u32 spiflash_regread32(int reg)
-+{
-+ volatile __u32 *data = (__u32 *)(flash_regs + reg);
-+
-+ return (*data);
-+}
-+
-+static inline void spiflash_regwrite32(int reg, __u32 data)
-+{
-+ volatile __u32 *addr = (__u32 *)(flash_regs + reg);
-+
-+ *addr = data;
-+}
-+
-+#define SPI_FLASH_CTL 0x00
-+#define SPI_FLASH_OPCODE 0x04
-+#define SPI_FLASH_DATA 0x08
-+
-+static __u8 spiflash_probe(void)
-+{
-+ __u32 reg;
-+
-+ do {
-+ reg = spiflash_regread32(SPI_FLASH_CTL);
-+ } while (reg & SPI_CTL_BUSY);
-+
-+ spiflash_regwrite32(SPI_FLASH_OPCODE, 0xab);
-+
-+ reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | 4 |
-+ (1 << 4) | SPI_CTL_START;
-+
-+ spiflash_regwrite32(SPI_FLASH_CTL, reg);
-+
-+ do {
-+ reg = spiflash_regread32(SPI_FLASH_CTL);
-+ } while (reg & SPI_CTL_BUSY);
-+
-+ reg = (__u32) spiflash_regread32(SPI_FLASH_DATA);
-+ reg &= 0xff;
-+
-+ return (u8) reg;
-+}
-+
-+static u8 *find_board_config(void)
-+{
-+ char *addr;
-+ int found = 0;
-+
-+ for (addr = (char *) (ar531x_spiflash_res[0].end - 0x1000);
-+ addr >= (char *) (ar531x_spiflash_res[0].end - 0x30000);
-+ addr -= 0x1000) {
-+
-+ if ( *(int *)addr == 0x35333131) {
-+ /* config magic found */
-+ found = 1;
-+ break;
-+ }
-+ }
-+
-+ if (!found) {
-+ printk("WARNING: No board configuration data found!\n");
-+ addr = NULL;
-+ }
-+
-+ return addr;
-+}
-+
-+static void *find_radio_config(char *board_config)
-+{
-+ int dataFound;
-+ u32 radio_config;
-+
-+ /*
-+ * Now find the start of Radio Configuration data, using heuristics:
-+ * Search forward from Board Configuration data by 0x1000 bytes
-+ * at a time until we find non-0xffffffff.
-+ */
-+ dataFound = 0;
-+ for (radio_config = (u32) board_config + 0x1000;
-+ (radio_config < (u32) ar531x_spiflash_res[0].end);
-+ radio_config += 0x1000) {
-+ if (*(int *)radio_config != 0xffffffff) {
-+ dataFound = 1;
-+ break;
-+ }
-+ }
-+
-+ if (!dataFound) { /* AR2316 relocates radio config to new location */
-+ for (radio_config = (u32) board_config + 0xf8;
-+ (radio_config < (u32) ar531x_spiflash_res[0].end - 0x1000 + 0xf8);
-+ radio_config += 0x1000) {
-+ if (*(int *)radio_config != 0xffffffff) {
-+ dataFound = 1;
-+ break;
-+ }
-+ }
-+ }
-+
-+ if (!dataFound) {
-+ printk("Could not find Radio Configuration data\n");
-+ radio_config = 0;
-+ }
-+
-+ return (u8 *) radio_config;
-+}
-+
-+
-+#define STM_8MBIT_SIGNATURE 0x13
-+#define STM_16MBIT_SIGNATURE 0x14
-+#define STM_32MBIT_SIGNATURE 0x15
-+#define STM_64MBIT_SIGNATURE 0x16
-+
-+
-+static void __init ar531x_init_flash(void)
-+{
-+ u8 sig;
-+ u32 flash_size = 0;
-+ unsigned int rcfg_size;
-+ char *bcfg, *rcfg, *board_config, *radio_config;
-+ struct ar531x_config *config;
-+
-+ /* probe the flash chip size */
-+ flash_regs = ioremap_nocache(ar531x_spiflash_res[1].start, ar531x_spiflash_res[1].end - ar531x_spiflash_res[1].start);
-+ sig = spiflash_probe();
-+ iounmap(flash_regs);
-+
-+ switch(sig) {
-+ case STM_8MBIT_SIGNATURE:
-+ flash_size = 0x00100000;
-+ break;
-+ case STM_16MBIT_SIGNATURE:
-+ flash_size = 0x00200000;
-+ break;
-+ case STM_32MBIT_SIGNATURE:
-+ flash_size = 0x00400000;
-+ break;
-+ case STM_64MBIT_SIGNATURE:
-+ flash_size = 0x00800000;
-+ break;
-+ }
-+
-+ if (!flash_size)
-+ return;
-+
-+ ar531x_spiflash_res[0].end = ar531x_spiflash_res[0].start + flash_size;
-+
-+ /* Copy the board and radio data to RAM, because with the new
-+ * spiflash driver, accessing the mapped memory directly is no
-+ * longer safe */
-+
-+ bcfg = find_board_config();
-+ if (!bcfg)
-+ return;
-+
-+ board_config = kmalloc(0x1000, GFP_KERNEL);
-+ memcpy(board_config, bcfg, 0x100);
-+ ar531x_eth_data.board_config = board_config;
-+
-+ /* Radio config starts 0x100 bytes after board config, regardless
-+ * of what the physical layout on the flash chip looks like */
-+
-+ rcfg = find_radio_config(bcfg);
-+ if (!rcfg)
-+ return;
-+ printk("Radio config found at offset 0x%x\n", rcfg - bcfg);
-+ radio_config = board_config + 0x100 + ((rcfg - bcfg) & 0xfff);
-+ rcfg_size = 0x1000 - ((rcfg - bcfg) & 0xfff);
-+ memcpy(radio_config, rcfg, rcfg_size);
-+
-+ config = (struct ar531x_config *) kzalloc(sizeof(struct ar531x_config), GFP_KERNEL);
-+ config->board = board_config;
-+ config->radio = radio_config;
-+ config->unit = 0;
-+ config->tag = (u_int16_t) (sysRegRead(AR5315_SREV) & REV_CHIP);
-+ ar531x_wmac.dev.platform_data = config;
-+}
-+
-+static int __init ar531x_register_devices(void)
-+{
-+ ar531x_init_flash();
-+ return platform_add_devices(ar531x_devs, ARRAY_SIZE(ar531x_devs));
-+}
-+
-+
-+arch_initcall(ar531x_register_devices);
-diff -urN linux.old/arch/mips/ar531x/gpio.c linux.dev/arch/mips/ar531x/gpio.c
---- linux.old/arch/mips/ar531x/gpio.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar531x/gpio.c 2006-12-16 04:49:20.000000000 +0100
-@@ -0,0 +1,127 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+/*
-+ * Support for GPIO -- General Purpose Input/Output Pins
-+ * XXX: should be rewritten
-+ */
-+
-+#include <linux/autoconf.h>
-+#include <linux/kernel.h>
-+#include <linux/signal.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+
-+#include "ar531xlnx.h"
-+
-+/* GPIO Interrupt Support */
-+
-+/* Turn on the specified AR531X_GPIO_IRQ interrupt */
-+static unsigned int
-+ar531x_gpio_intr_startup(unsigned int irq)
-+{
-+ ar531x_gpio_intr_enable(irq);
-+
-+ return 0;
-+}
-+
-+/* Turn off the specified AR531X_GPIO_IRQ interrupt */
-+static void
-+ar531x_gpio_intr_shutdown(unsigned int irq)
-+{
-+ ar531x_gpio_intr_disable(irq);
-+}
-+
-+u32 gpioIntMask = 0;
-+
-+static void ar531x_gpio_intr_set_enabled(unsigned int gpio, int enabled)
-+{
-+ u32 reg;
-+ int intnum = 0;
-+ int intlevel = 2;
-+
-+ reg = sysRegRead(AR5315_GPIO_CR);
-+ reg &= ~(GPIO_CR_M(gpio));
-+ reg |= GPIO_CR_I(gpio);
-+ sysRegWrite(AR5315_GPIO_CR, reg);
-+ (void)sysRegRead(AR5315_GPIO_CR); /* flush write to hardware */
-+
-+ reg = sysRegRead(AR5315_GPIO_INT);
-+
-+ reg &= ~(GPIO_INT_M(intnum));
-+ reg &= ~(GPIO_INT_LVL_M(intnum));
-+
-+ if (enabled) {
-+ reg |= GPIO_INT_LVL(intlevel, intnum);
-+ reg |= GPIO_INT(gpio, intnum);
-+ }
-+
-+ sysRegWrite(AR5315_GPIO_INT, reg);
-+ (void)sysRegRead(AR5315_GPIO_INT); /* flush write to hardware */
-+}
-+
-+
-+/* Enable the specified AR531X_GPIO_IRQ interrupt */
-+static void
-+ar531x_gpio_intr_enable(unsigned int irq)
-+{
-+ int gpio = irq - AR531X_GPIO_IRQ_BASE;
-+
-+ gpioIntMask |= (1<<gpio);
-+ ar531x_gpio_intr_set_enabled(irq, 1);
-+}
-+
-+/* Disable the specified AR531X_GPIO_IRQ interrupt */
-+static void
-+ar531x_gpio_intr_disable(unsigned int irq)
-+{
-+ int gpio = irq - AR531X_GPIO_IRQ_BASE;
-+
-+ gpioIntMask &= (1<<gpio);
-+ ar531x_gpio_intr_set_enabled(irq, 0);
-+}
-+
-+
-+static void
-+ar531x_gpio_intr_end(unsigned int irq)
-+{
-+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-+ ar531x_gpio_intr_enable(irq);
-+}
-+
-+int ar531x_gpio_irq_base;
-+
-+struct hw_interrupt_type ar531x_gpio_intr_controller = {
-+ .typename = "AR531X GPIO",
-+ .startup = ar531x_gpio_intr_startup,
-+ .shutdown = ar531x_gpio_intr_shutdown,
-+ .enable = ar531x_gpio_intr_enable,
-+ .disable = ar531x_gpio_intr_disable,
-+ .ack = ar531x_gpio_intr_disable,
-+ .end = ar531x_gpio_intr_end,
-+};
-+
-+void
-+ar531x_gpio_intr_init(int irq_base)
-+{
-+ int i;
-+
-+ for (i = irq_base; i < irq_base + AR531X_GPIO_IRQ_COUNT; i++) {
-+ irq_desc[i].status = IRQ_DISABLED;
-+ irq_desc[i].action = NULL;
-+ irq_desc[i].depth = 1;
-+ irq_desc[i].chip = &ar531x_gpio_intr_controller;
-+ }
-+
-+ ar531x_gpio_irq_base = irq_base;
-+}
-+
-+
-diff -urN linux.old/arch/mips/ar531x/irq.c linux.dev/arch/mips/ar531x/irq.c
---- linux.old/arch/mips/ar531x/irq.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar531x/irq.c 2006-12-17 15:09:04.000000000 +0100
-@@ -0,0 +1,312 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+/*
-+ * Interrupt support for AR531X WiSOC.
-+ */
-+
-+#include <linux/autoconf.h>
-+#include <linux/init.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/signal.h>
-+#include <linux/sched.h>
-+#include <linux/interrupt.h>
-+#include <linux/slab.h>
-+#include <linux/random.h>
-+#include <linux/pm.h>
-+#include <linux/delay.h>
-+#include <linux/reboot.h>
-+
-+#include <asm/irq.h>
-+#include <asm/mipsregs.h>
-+#include <asm/gdb-stub.h>
-+
-+#include "ar531xlnx.h"
-+#include <asm/irq_cpu.h>
-+
-+extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
-+
-+static void ar531x_misc_intr_enable(unsigned int irq);
-+static void ar531x_misc_intr_disable(unsigned int irq);
-+
-+
-+/* Turn on the specified AR531X_MISC_IRQ interrupt */
-+static unsigned int
-+ar531x_misc_intr_startup(unsigned int irq)
-+{
-+ ar531x_misc_intr_enable(irq);
-+ return 0;
-+}
-+
-+/* Turn off the specified AR531X_MISC_IRQ interrupt */
-+static void
-+ar531x_misc_intr_shutdown(unsigned int irq)
-+{
-+ ar531x_misc_intr_disable(irq);
-+}
-+
-+/* Enable the specified AR531X_MISC_IRQ interrupt */
-+static void
-+ar531x_misc_intr_enable(unsigned int irq)
-+{
-+ unsigned int imr;
-+
-+ imr = sysRegRead(AR5315_IMR);
-+ switch(irq)
-+ {
-+ case AR531X_MISC_IRQ_TIMER:
-+ imr |= IMR_TIMER;
-+ break;
-+
-+ case AR531X_MISC_IRQ_AHB_PROC:
-+ imr |= IMR_AHB;
-+ break;
-+
-+ case AR531X_MISC_IRQ_AHB_DMA:
-+ imr |= 0/* ?? */;
-+ break;
-+
-+ case AR531X_MISC_IRQ_GPIO:
-+ imr |= IMR_GPIO;
-+ break;
-+
-+ case AR531X_MISC_IRQ_UART0:
-+ imr |= IMR_UART0;
-+ break;
-+
-+
-+ case AR531X_MISC_IRQ_WATCHDOG:
-+ imr |= IMR_WD;
-+ break;
-+
-+ case AR531X_MISC_IRQ_LOCAL:
-+ imr |= 0/* ?? */;
-+ break;
-+
-+ }
-+ sysRegWrite(AR5315_IMR, imr);
-+ imr=sysRegRead(AR5315_IMR); /* flush write buffer */
-+ //printk("enable Interrupt irq 0x%x imr 0x%x \n",irq,imr);
-+
-+}
-+
-+/* Disable the specified AR531X_MISC_IRQ interrupt */
-+static void
-+ar531x_misc_intr_disable(unsigned int irq)
-+{
-+ unsigned int imr;
-+
-+ imr = sysRegRead(AR5315_IMR);
-+ switch(irq)
-+ {
-+ case AR531X_MISC_IRQ_TIMER:
-+ imr &= (~IMR_TIMER);
-+ break;
-+
-+ case AR531X_MISC_IRQ_AHB_PROC:
-+ imr &= (~IMR_AHB);
-+ break;
-+
-+ case AR531X_MISC_IRQ_AHB_DMA:
-+ imr &= 0/* ?? */;
-+ break;
-+
-+ case AR531X_MISC_IRQ_GPIO:
-+ imr &= ~IMR_GPIO;
-+ break;
-+
-+ case AR531X_MISC_IRQ_UART0:
-+ imr &= (~IMR_UART0);
-+ break;
-+
-+ case AR531X_MISC_IRQ_WATCHDOG:
-+ imr &= (~IMR_WD);
-+ break;
-+
-+ case AR531X_MISC_IRQ_LOCAL:
-+ imr &= ~0/* ?? */;
-+ break;
-+
-+ }
-+ sysRegWrite(AR5315_IMR, imr);
-+ sysRegRead(AR5315_IMR); /* flush write buffer */
-+}
-+
-+static void
-+ar531x_misc_intr_ack(unsigned int irq)
-+{
-+ ar531x_misc_intr_disable(irq);
-+}
-+
-+static void
-+ar531x_misc_intr_end(unsigned int irq)
-+{
-+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-+ ar531x_misc_intr_enable(irq);
-+}
-+
-+struct irq_chip ar531x_misc_intr_controller = {
-+ .typename = "AR531X MISC",
-+ .startup = ar531x_misc_intr_startup,
-+ .shutdown = ar531x_misc_intr_shutdown,
-+ .enable = ar531x_misc_intr_enable,
-+ .disable = ar531x_misc_intr_disable,
-+ .ack = ar531x_misc_intr_ack,
-+ .end = ar531x_misc_intr_end,
-+};
-+
-+/*
-+ * Determine interrupt source among interrupts that use IP6
-+ */
-+void
-+ar531x_misc_intr_init(int irq_base)
-+{
-+ int i;
-+
-+ for (i = irq_base; i < irq_base + AR531X_MISC_IRQ_COUNT; i++) {
-+ irq_desc[i].status = IRQ_DISABLED;
-+ irq_desc[i].action = NULL;
-+ irq_desc[i].depth = 1;
-+ irq_desc[i].chip = &ar531x_misc_intr_controller;
-+ }
-+}
-+
-+/* ARGSUSED */
-+irqreturn_t
-+spurious_irq_handler(int cpl, void *dev_id)
-+{
-+ /*
-+ printk("spurious_irq_handler: %d cause=0x%8.8x status=0x%8.8x\n",
-+ cpl, cause_intrs, status_intrs);
-+ */
-+ return IRQ_NONE;
-+}
-+
-+/* ARGSUSED */
-+irqreturn_t
-+spurious_misc_handler(int cpl, void *dev_id)
-+{
-+ /*
-+ printk("spurious_misc_handler: 0x%x isr=0x%8.8x imr=0x%8.8x\n",
-+ cpl, ar531x_isr, ar531x_imr);
-+ */
-+ return IRQ_NONE;
-+}
-+
-+irqreturn_t
-+ar531x_ahb_proc_handler(int cpl, void *dev_id)
-+{
-+ u32 procAddr = -1;
-+ u32 proc1 = -1;
-+ u32 dmaAddr = -1;
-+ u32 dma1 = -1;
-+ sysRegWrite(AR5315_AHB_ERR0,AHB_ERROR_DET);
-+ sysRegRead(AR5315_AHB_ERR1);
-+
-+ printk("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n",
-+ procAddr, proc1, dmaAddr, dma1);
-+
-+ machine_restart("AHB error"); /* Catastrophic failure */
-+ return IRQ_HANDLED;
-+}
-+
-+static struct irqaction cascade = {
-+ .handler = no_action,
-+ .flags = SA_INTERRUPT,
-+ .name = "cascade",
-+};
-+
-+static struct irqaction spurious_irq = {
-+ .handler = spurious_irq_handler,
-+ .flags = SA_INTERRUPT,
-+ .name = "spurious_irq",
-+};
-+
-+static struct irqaction spurious_misc = {
-+ .handler = spurious_misc_handler,
-+ .flags = SA_INTERRUPT,
-+ .name = "spurious_misc",
-+};
-+
-+static struct irqaction ar531x_ahb_proc_interrupt = {
-+ .handler = ar531x_ahb_proc_handler,
-+ .flags = SA_INTERRUPT,
-+ .name = "ar531x_ahb_proc_interrupt",
-+};
-+
-+/*
-+ * Called when an interrupt is received, this function
-+ * determines exactly which interrupt it was, and it
-+ * invokes the appropriate handler.
-+ *
-+ * Implicitly, we also define interrupt priority by
-+ * choosing which to dispatch first.
-+ */
-+asmlinkage void plat_irq_dispatch(void)
-+{
-+ int pending = read_c0_status() & read_c0_cause();
-+
-+ if (pending & CAUSEF_IP3)
-+ do_IRQ(AR531X_IRQ_WLAN0_INTRS);
-+ else if (pending & CAUSEF_IP4)
-+ do_IRQ(AR531X_IRQ_ENET0_INTRS);
-+ else if (pending & CAUSEF_IP2) {
-+ unsigned int ar531x_misc_intrs = sysRegRead(AR5315_ISR) & sysRegRead(AR5315_IMR);
-+
-+ if (ar531x_misc_intrs & ISR_TIMER)
-+ do_IRQ(AR531X_MISC_IRQ_TIMER);
-+ else if (ar531x_misc_intrs & ISR_AHB)
-+ do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
-+ else if (ar531x_misc_intrs & ISR_GPIO) {
-+#if 0
-+ int i;
-+ u32 gpioIntPending;
-+
-+ gpioIntPending = sysRegRead(AR5315_GPIO_DI) & gpioIntMask;
-+ for (i=0; i<AR531X_GPIO_IRQ_COUNT; i++) {
-+ if (gpioIntPending & (1 << i))
-+ do_IRQ(AR531X_GPIO_IRQ_BASE+i);
-+ }
-+#endif
-+ sysRegWrite(AR5315_ISR, sysRegRead(AR5315_IMR) | ~ISR_GPIO);
-+ } else if (ar531x_misc_intrs & ISR_UART0)
-+ do_IRQ(AR531X_MISC_IRQ_UART0);
-+ else if (ar531x_misc_intrs & ISR_WD)
-+ do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
-+ else
-+ do_IRQ(AR531X_MISC_IRQ_NONE);
-+ } else if (pending & CAUSEF_IP7)
-+ do_IRQ(AR531X_IRQ_CPU_CLOCK);
-+ else
-+ do_IRQ(AR531X_IRQ_NONE);
-+}
-+
-+void __init arch_init_irq(void)
-+{
-+ clear_c0_status(ST0_IM);
-+ mips_cpu_irq_init(0);
-+
-+ /* Initialize interrupt controllers */
-+ ar531x_misc_intr_init(AR531X_MISC_IRQ_BASE);
-+#if 0
-+ ar531x_gpio_intr_init(AR531X_GPIO_IRQ_BASE);
-+#endif
-+ setup_irq(AR531X_IRQ_MISC_INTRS, &cascade);
-+ /*
-+ * AR531X_IRQ_CPU_CLOCK is setup by ar531x_timer_setup.
-+ */
-+
-+ /* Default "spurious interrupt" handlers */
-+ setup_irq(AR531X_IRQ_NONE, &spurious_irq);
-+ setup_irq(AR531X_MISC_IRQ_NONE, &spurious_misc);
-+ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar531x_ahb_proc_interrupt);
-+ setup_irq(AR531X_MISC_IRQ_GPIO, &cascade);
-+}
-diff -urN linux.old/arch/mips/ar531x/Makefile linux.dev/arch/mips/ar531x/Makefile
---- linux.old/arch/mips/ar531x/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar531x/Makefile 2006-12-16 03:51:47.000000000 +0100
-@@ -0,0 +1,18 @@
-+#
-+# This file is subject to the terms and conditions of the GNU General Public
-+# License. See the file "COPYING" in the main directory of this archive
-+# for more details.
-+#
-+# Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+# Copyright (C) 2006 FON Technology, SL.
-+# Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+# Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+#
-+
-+# Makefile for Atheros ar531x boards
-+#
-+# Note! Dependencies are done automagically by 'make dep', which also
-+# removes any old dependencies. DON'T put your own dependencies here
-+# unless it's something special (ie not a .c file).
-+#
-+obj-y := setup.o prom.o irq.o devices.o
-diff -urN linux.old/arch/mips/ar531x/prom.c linux.dev/arch/mips/ar531x/prom.c
---- linux.old/arch/mips/ar531x/prom.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar531x/prom.c 2006-12-16 04:50:30.000000000 +0100
-@@ -0,0 +1,50 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright MontaVista Software Inc
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+/*
-+ * Prom setup file for ar531x
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/autoconf.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/mm.h>
-+#include <linux/bootmem.h>
-+
-+#include <asm/bootinfo.h>
-+#include <asm/addrspace.h>
-+
-+#include "ar531xlnx.h"
-+
-+void __init prom_init(void)
-+{
-+ u32 memsize, memcfg;
-+
-+ mips_machgroup = MACH_GROUP_AR531X;
-+ mips_machtype = MACH_ATHEROS_AP51;
-+
-+ memcfg = sysRegRead(AR5315_MEM_CFG);
-+ memsize = 1 + ((memcfg & SDRAM_DATA_WIDTH_M) >> SDRAM_DATA_WIDTH_S);
-+ memsize <<= 1 + ((memcfg & SDRAM_COL_WIDTH_M) >> SDRAM_COL_WIDTH_S);
-+ memsize <<= 1 + ((memcfg & SDRAM_ROW_WIDTH_M) >> SDRAM_ROW_WIDTH_S);
-+ memsize <<= 3;
-+ add_memory_region(0, memsize, BOOT_MEM_RAM);
-+
-+ strcpy(arcs_cmdline, "console=ttyS0,9600 rootfstype=squashfs,jffs2");
-+}
-+
-+void __init prom_free_prom_memory(void)
-+{
-+}
-+
-+
-diff -urN linux.old/arch/mips/ar531x/setup.c linux.dev/arch/mips/ar531x/setup.c
---- linux.old/arch/mips/ar531x/setup.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar531x/setup.c 2006-12-16 03:51:47.000000000 +0100
-@@ -0,0 +1,198 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+/*
-+ * Initialization for ar531x SOC.
-+ */
-+
-+#include <linux/autoconf.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/delay.h>
-+#include <linux/irq.h>
-+#include <linux/interrupt.h>
-+#include <linux/pm.h>
-+#include <linux/serial.h>
-+#include <linux/serial_core.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+
-+#include <asm/reboot.h>
-+#include <asm/io.h>
-+#include <asm/time.h>
-+#include <asm/pgtable.h>
-+#include <asm/processor.h>
-+#include <asm/reboot.h>
-+#include <asm/system.h>
-+#include <asm/serial.h>
-+
-+#include "ar531xlnx.h"
-+
-+void
-+ar531x_restart(char *command)
-+{
-+ for(;;) {
-+ /*
-+ ** Cold reset does not work,work around is to use the GPIO reset bit.
-+ */
-+ unsigned int reg;
-+
-+ /* AR2317 reset */
-+ sysRegWrite(AR5315_COLD_RESET,AR5317_RESET_SYSTEM);
-+
-+ reg = sysRegRead(AR5315_GPIO_DO);
-+ reg &= ~(1 << AR5315_RESET_GPIO);
-+ sysRegWrite(AR5315_GPIO_DO, reg);
-+ (void)sysRegRead(AR5315_GPIO_DO); /* flush write to hardware */
-+ }
-+}
-+
-+void
-+ar531x_halt(void)
-+{
-+ printk(KERN_NOTICE "\n** You can safely turn off the power\n");
-+ while (1);
-+}
-+
-+void
-+ar531x_power_off(void)
-+{
-+ ar531x_halt();
-+}
-+
-+char *get_system_type(void)
-+{
-+ return "Atheros AR5315";
-+}
-+
-+/*
-+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
-+ * to determine the predevisor value.
-+ */
-+static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = {
-+ 1,
-+ 2,
-+ 4,
-+ 5
-+};
-+
-+static int __initdata PLLC_DIVIDE_TABLE[5] = {
-+ 2,
-+ 3,
-+ 4,
-+ 6,
-+ 3
-+};
-+
-+static unsigned int __init
-+ar531x_sys_clk(unsigned int clockCtl)
-+{
-+ unsigned int pllcCtrl,cpuDiv;
-+ unsigned int pllcOut,refdiv,fdiv,divby2;
-+ unsigned int clkDiv;
-+
-+ pllcCtrl = sysRegRead(AR5315_PLLC_CTL);
-+ refdiv = (pllcCtrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S;
-+ refdiv = CLOCKCTL1_PREDIVIDE_TABLE[refdiv];
-+ fdiv = (pllcCtrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S;
-+ divby2 = (pllcCtrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S;
-+ divby2 += 1;
-+ pllcOut = (40000000/refdiv)*(2*divby2)*fdiv;
-+
-+
-+ /* clkm input selected */
-+ switch(clockCtl & CPUCLK_CLK_SEL_M) {
-+ case 0:
-+ case 1:
-+ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKM_DIV_M) >> PLLC_CLKM_DIV_S];
-+ break;
-+ case 2:
-+ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKC_DIV_M) >> PLLC_CLKC_DIV_S];
-+ break;
-+ default:
-+ pllcOut = 40000000;
-+ clkDiv = 1;
-+ break;
-+ }
-+ cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S;
-+ cpuDiv = cpuDiv * 2 ?: 1;
-+ return (pllcOut/(clkDiv * cpuDiv));
-+}
-+
-+static inline unsigned int ar531x_cpu_frequency(void)
-+{
-+ return ar531x_sys_clk(sysRegRead(AR5315_CPUCLK));
-+}
-+
-+static inline unsigned int ar531x_apb_frequency(void)
-+{
-+ return ar531x_sys_clk(sysRegRead(AR5315_AMBACLK));
-+}
-+
-+
-+void __init serial_setup(void)
-+{
-+ struct uart_port s;
-+
-+ memset(&s, 0, sizeof(s));
-+
-+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-+ s.iotype = UPIO_MEM;
-+ s.uartclk = AR5315_UART_CLOCK_RATE;
-+ s.irq = AR531X_MISC_IRQ_UART0;
-+ s.regshift = 2;
-+ s.mapbase = KSEG1ADDR(AR5315_UART0);
-+ s.membase = (void __iomem *)s.mapbase;
-+
-+ early_serial_setup(&s);
-+}
-+
-+void __init plat_timer_setup(struct irqaction *irq)
-+{
-+ unsigned int count;
-+
-+ /* Usually irq is timer_irqaction (timer_interrupt) */
-+ setup_irq(AR531X_IRQ_CPU_CLOCK, irq);
-+
-+ /* to generate the first CPU timer interrupt */
-+ count = read_c0_count();
-+ write_c0_compare(count + 1000);
-+}
-+
-+static void __init
-+ar531x_time_init(void)
-+{
-+ mips_hpt_frequency = ar531x_cpu_frequency() / 2;
-+}
-+
-+void __init plat_mem_setup(void)
-+{
-+ unsigned int config = read_c0_config();
-+
-+ /* Clear any lingering AHB errors */
-+ write_c0_config(config & ~0x3);
-+ sysRegWrite(AR5315_AHB_ERR0,AHB_ERROR_DET);
-+ sysRegRead(AR5315_AHB_ERR1);
-+ sysRegWrite(AR5315_WDC, WDC_IGNORE_EXPIRATION);
-+
-+ /* Disable data watchpoints */
-+ write_c0_watchlo0(0);
-+
-+ board_time_init = ar531x_time_init;
-+
-+ _machine_restart = ar531x_restart;
-+ _machine_halt = ar531x_halt;
-+ pm_power_off = ar531x_power_off;
-+
-+ serial_setup();
-+}
-+
-+EXPORT_SYMBOL(get_system_type);
diff -urN linux.old/arch/mips/Kconfig linux.dev/arch/mips/Kconfig
---- linux.old/arch/mips/Kconfig 2006-11-29 22:57:37.000000000 +0100
-+++ linux.dev/arch/mips/Kconfig 2006-12-16 03:51:47.000000000 +0100
-@@ -145,6 +145,19 @@
+--- linux.old/arch/mips/Kconfig 2007-02-02 23:55:52.912446784 +0100
++++ linux.dev/arch/mips/Kconfig 2007-02-03 21:50:25.262027104 +0100
+@@ -145,6 +145,16 @@
note that a kernel built with this option selected will not be
able to run on normal units.
-+config AR531X
-+ bool 'Atheros AR531x/AR231x WiSoC (EXPERIMENTAL)'
++config ATHEROS
++ bool "Atheros SoC support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select SYS_HAS_CPU_MIPS32_R1
+ select HAVE_STD_PC_SERIAL_PORT
-+ select AR531X_COBRA
-+ select AR5315
-+ select AP51
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_32BIT_KERNEL
+
config MIPS_COBALT
bool "Cobalt Server"
select DMA_NONCOHERENT
-@@ -864,6 +877,18 @@
- config MIPS_DISABLE_OBSOLETE_IDE
- bool
+@@ -766,6 +776,7 @@
-+config AR531X_COBRA
-+ bool
-+
-+config AR5315
-+ bool
-+
-+config AR5317
-+ bool
-+
-+config AP51
-+ bool
-+
- #
- # Endianess selection. Suffiently obscure so many users don't know what to
- # answer,so we try hard to limit the available choices. Also the use of a
+ endchoice
+
++source "arch/mips/atheros/Kconfig"
+ source "arch/mips/ddb5xxx/Kconfig"
+ source "arch/mips/gt64120/ev64120/Kconfig"
+ source "arch/mips/jazz/Kconfig"
diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile
---- linux.old/arch/mips/Makefile 2006-12-14 23:53:29.000000000 +0100
-+++ linux.dev/arch/mips/Makefile 2006-12-16 04:45:48.000000000 +0100
+--- linux.old/arch/mips/Makefile 2007-02-02 23:55:52.913446632 +0100
++++ linux.dev/arch/mips/Makefile 2007-02-03 17:40:29.193776000 +0100
@@ -267,6 +267,13 @@
load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000
#
+# Atheros AR5312/AR2312 WiSoC
+#
-+core-$(CONFIG_AR531X) += arch/mips/ar531x/
-+cflags-$(CONFIG_AR531X) += -Iinclude/asm-mips/mach-atheros
-+load-$(CONFIG_AR531X) += 0xffffffff80041000
++core-$(CONFIG_ATHEROS) += arch/mips/atheros/
++cflags-$(CONFIG_ATHEROS) += -Iinclude/asm-mips/mach-atheros
++load-$(CONFIG_ATHEROS) += 0xffffffff80041000
+
+#
# Cobalt Server
#
core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/
diff -urN linux.old/include/asm-mips/bootinfo.h linux.dev/include/asm-mips/bootinfo.h
---- linux.old/include/asm-mips/bootinfo.h 2006-11-29 22:57:37.000000000 +0100
-+++ linux.dev/include/asm-mips/bootinfo.h 2006-12-16 03:51:47.000000000 +0100
-@@ -212,6 +212,19 @@
+--- linux.old/include/asm-mips/bootinfo.h 2007-02-02 23:55:52.913446632 +0100
++++ linux.dev/include/asm-mips/bootinfo.h 2007-02-03 17:51:02.531494032 +0100
+@@ -212,6 +212,13 @@
#define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */
#define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */
+/*
-+ * Valid machtype for group AR531X
++ * Valid machtype for group ATHEROS
+ */
-+#define MACH_GROUP_AR531X 23
-+#define MACH_ATHEROS_UNUSED 0
-+#define MACH_ATHEROS_AP30 1 /* AP30 */
-+#define MACH_ATHEROS_AP33 2 /* AP33 */
-+#define MACH_ATHEROS_AP38 3 /* AP38 */
-+#define MACH_ATHEROS_AP43 4 /* AP43 */
-+#define MACH_ATHEROS_AP48 5 /* AP48 */
-+#define MACH_ATHEROS_PB32 6 /* PB32 */
-+#define MACH_ATHEROS_AP51 7 /* AP51 */
++#define MACH_GROUP_ATHEROS 26
++#define MACH_ATHEROS_AR5312 0 /* Atheros AR5312, AR2312/3/4 */
++#define MACH_ATHEROS_AR5315 1 /* Atheros AR2315/6/7/8 */
+
#define CL_SIZE COMMAND_LINE_SIZE
const char *get_system_type(void);
-diff -urN linux.old/include/asm-mips/mach-atheros/ar531x_platform.h linux.dev/include/asm-mips/mach-atheros/ar531x_platform.h
---- linux.old/include/asm-mips/mach-atheros/ar531x_platform.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/asm-mips/mach-atheros/ar531x_platform.h 2006-12-16 04:27:21.000000000 +0100
-@@ -0,0 +1,14 @@
-+#ifndef __AR531X_PLATFORM_H
-+#define __AR531X_PLATFORM_H
-+
-+struct ar531x_eth {
-+ int phy;
-+ int mac;
-+ u32 reset_base;
-+ u32 reset_mac;
-+ u32 reset_phy;
-+ char *board_config;
-+};
-+
-+#endif /* __AR531X_PLATFORM_H */
-+
+
diff --git a/target/linux/atheros-2.6/patches/110-spiflash.patch b/target/linux/atheros-2.6/patches/110-spiflash.patch
index a8fc4af8ed..e6461ff06d 100644
--- a/target/linux/atheros-2.6/patches/110-spiflash.patch
+++ b/target/linux/atheros-2.6/patches/110-spiflash.patch
@@ -1,750 +1,23 @@
diff -urN linux.old/drivers/mtd/devices/Kconfig linux.dev/drivers/mtd/devices/Kconfig
---- linux.old/drivers/mtd/devices/Kconfig 2006-11-29 22:57:37.000000000 +0100
-+++ linux.dev/drivers/mtd/devices/Kconfig 2006-12-15 00:03:11.000000000 +0100
+--- linux.old/drivers/mtd/devices/Kconfig 2007-02-04 04:30:26.145338240 +0100
++++ linux.dev/drivers/mtd/devices/Kconfig 2007-02-02 23:48:28.748969000 +0100
@@ -68,6 +68,10 @@
used for program and data storage. Set up your spi devices
with the right board-specific platform data.
+config MTD_SPIFLASH
+ tristate "Atheros AR2315/6/7 SPI Flash support"
-+ depends on MTD && AR531X_COBRA
++ depends on MTD && ATHEROS_AR5315
+
config MTD_SLRAM
tristate "Uncached system RAM"
depends on MTD
diff -urN linux.old/drivers/mtd/devices/Makefile linux.dev/drivers/mtd/devices/Makefile
---- linux.old/drivers/mtd/devices/Makefile 2006-11-29 22:57:37.000000000 +0100
-+++ linux.dev/drivers/mtd/devices/Makefile 2006-12-15 00:03:11.000000000 +0100
+--- linux.old/drivers/mtd/devices/Makefile 2007-02-04 04:30:26.146338088 +0100
++++ linux.dev/drivers/mtd/devices/Makefile 2007-02-02 23:48:28.749969000 +0100
@@ -17,3 +17,4 @@
obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
obj-$(CONFIG_MTD_M25P80) += m25p80.o
+obj-$(CONFIG_MTD_SPIFLASH) += spiflash.o
-diff -urN linux.old/drivers/mtd/devices/spiflash.c linux.dev/drivers/mtd/devices/spiflash.c
---- linux.old/drivers/mtd/devices/spiflash.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/mtd/devices/spiflash.c 2006-12-15 08:26:11.000000000 +0100
-@@ -0,0 +1,595 @@
-+
-+/*
-+ * MTD driver for the SPI Flash Memory support.
-+ *
-+ * Copyright (c) 2005-2006 Atheros Communications Inc.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * This code is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+/*===========================================================================
-+** !!!! VERY IMPORTANT NOTICE !!!! FLASH DATA STORED IN LITTLE ENDIAN FORMAT
-+**
-+** This module contains the Serial Flash access routines for the Atheros SOC.
-+** The Atheros SOC integrates a SPI flash controller that is used to access
-+** serial flash parts. The SPI flash controller executes in "Little Endian"
-+** mode. THEREFORE, all WRITES and READS from the MIPS CPU must be
-+** BYTESWAPPED! The SPI Flash controller hardware by default performs READ
-+** ONLY byteswapping when accessed via the SPI Flash Alias memory region
-+** (Physical Address 0x0800_0000 - 0x0fff_ffff). The data stored in the
-+** flash sectors is stored in "Little Endian" format.
-+**
-+** The spiflash_write() routine performs byteswapping on all write
-+** operations.
-+**===========================================================================*/
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/version.h>
-+#include <linux/errno.h>
-+#include <linux/slab.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/squashfs_fs.h>
-+#include <linux/root_dev.h>
-+#include <asm/delay.h>
-+#include <asm/io.h>
-+#include "spiflash.h"
-+
-+/* debugging */
-+/* #define SPIFLASH_DEBUG */
-+
-+#ifndef __BIG_ENDIAN
-+#error This driver currently only works with big endian CPU.
-+#endif
-+
-+#define MAX_PARTS 32
-+
-+static char module_name[] = "spiflash";
-+
-+#define MIN(a,b) ((a) < (b) ? (a) : (b))
-+#define FALSE 0
-+#define TRUE 1
-+
-+#define ROOTFS_NAME "rootfs"
-+
-+static __u32 spiflash_regread32(int reg);
-+static void spiflash_regwrite32(int reg, __u32 data);
-+static __u32 spiflash_sendcmd (int op);
-+
-+static void __init spidata_init(void);
-+int __init spiflash_init (void);
-+void __exit spiflash_exit (void);
-+static int spiflash_probe (void);
-+static int spiflash_erase (struct mtd_info *mtd,struct erase_info *instr);
-+static int spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf);
-+static int spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf);
-+
-+/* Flash configuration table */
-+struct flashconfig {
-+ __u32 byte_cnt;
-+ __u32 sector_cnt;
-+ __u32 sector_size;
-+ __u32 cs_addrmask;
-+} flashconfig_tbl[MAX_FLASH] =
-+ {
-+ { 0, 0, 0, 0},
-+ { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, STM_1MB_SECTOR_SIZE, 0x0},
-+ { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, STM_2MB_SECTOR_SIZE, 0x0},
-+ { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, STM_4MB_SECTOR_SIZE, 0x0},
-+ { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT, STM_8MB_SECTOR_SIZE, 0x0}
-+ };
-+
-+/* Mapping of generic opcodes to STM serial flash opcodes */
-+struct opcodes {
-+ __u16 code;
-+ __s8 tx_cnt;
-+ __s8 rx_cnt;
-+} stm_opcodes[] = {
-+ {STM_OP_WR_ENABLE, 1, 0},
-+ {STM_OP_WR_DISABLE, 1, 0},
-+ {STM_OP_RD_STATUS, 1, 1},
-+ {STM_OP_WR_STATUS, 1, 0},
-+ {STM_OP_RD_DATA, 4, 4},
-+ {STM_OP_FAST_RD_DATA, 1, 0},
-+ {STM_OP_PAGE_PGRM, 8, 0},
-+ {STM_OP_SECTOR_ERASE, 4, 0},
-+ {STM_OP_BULK_ERASE, 1, 0},
-+ {STM_OP_DEEP_PWRDOWN, 1, 0},
-+ {STM_OP_RD_SIG, 4, 1}
-+};
-+
-+/* Driver private data structure */
-+struct spiflash_data {
-+ struct mtd_info *mtd;
-+ struct mtd_partition *parsed_parts; /* parsed partitions */
-+ void *spiflash_readaddr; /* memory mapped data for read */
-+ void *spiflash_mmraddr; /* memory mapped register space */
-+ spinlock_t mutex;
-+};
-+
-+static struct spiflash_data *spidata;
-+
-+extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts);
-+
-+/***************************************************************************************************/
-+
-+static __u32
-+spiflash_regread32(int reg)
-+{
-+ volatile __u32 *data = (__u32 *)(spidata->spiflash_mmraddr + reg);
-+
-+ return (*data);
-+}
-+
-+static void
-+spiflash_regwrite32(int reg, __u32 data)
-+{
-+ volatile __u32 *addr = (__u32 *)(spidata->spiflash_mmraddr + reg);
-+
-+ *addr = data;
-+ return;
-+}
-+
-+static __u32
-+spiflash_sendcmd (int op)
-+{
-+ __u32 reg;
-+ __u32 mask;
-+ struct opcodes *ptr_opcode;
-+
-+ ptr_opcode = &stm_opcodes[op];
-+
-+ do {
-+ reg = spiflash_regread32(SPI_FLASH_CTL);
-+ } while (reg & SPI_CTL_BUSY);
-+
-+ spiflash_regwrite32(SPI_FLASH_OPCODE, ptr_opcode->code);
-+
-+ reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | ptr_opcode->tx_cnt |
-+ (ptr_opcode->rx_cnt << 4) | SPI_CTL_START;
-+
-+ spiflash_regwrite32(SPI_FLASH_CTL, reg);
-+
-+ if (ptr_opcode->rx_cnt > 0) {
-+ do {
-+ reg = spiflash_regread32(SPI_FLASH_CTL);
-+ } while (reg & SPI_CTL_BUSY);
-+
-+ reg = (__u32) spiflash_regread32(SPI_FLASH_DATA);
-+
-+ switch (ptr_opcode->rx_cnt) {
-+ case 1:
-+ mask = 0x000000ff;
-+ break;
-+ case 2:
-+ mask = 0x0000ffff;
-+ break;
-+ case 3:
-+ mask = 0x00ffffff;
-+ break;
-+ default:
-+ mask = 0xffffffff;
-+ break;
-+ }
-+
-+ reg &= mask;
-+ }
-+ else {
-+ reg = 0;
-+ }
-+
-+ return reg;
-+}
-+
-+/* Probe SPI flash device
-+ * Function returns 0 for failure.
-+ * and flashconfig_tbl array index for success.
-+ */
-+static int
-+spiflash_probe (void)
-+{
-+ __u32 sig;
-+ int flash_size;
-+
-+ if (!spidata)
-+ spidata_init();
-+
-+ if (!spidata) /* init failed */
-+ return 0;
-+
-+ /* Read the signature on the flash device */
-+ sig = spiflash_sendcmd(SPI_RD_SIG);
-+
-+ switch (sig) {
-+ case STM_8MBIT_SIGNATURE:
-+ flash_size = FLASH_1MB;
-+ break;
-+ case STM_16MBIT_SIGNATURE:
-+ flash_size = FLASH_2MB;
-+ break;
-+ case STM_32MBIT_SIGNATURE:
-+ flash_size = FLASH_4MB;
-+ break;
-+ case STM_64MBIT_SIGNATURE:
-+ flash_size = FLASH_8MB;
-+ break;
-+ default:
-+ printk (KERN_WARNING "%s: Read of flash device signature failed!\n", module_name);
-+ return (0);
-+ }
-+
-+ return (flash_size);
-+}
-+
-+
-+static int
-+spiflash_erase (struct mtd_info *mtd,struct erase_info *instr)
-+{
-+ struct opcodes *ptr_opcode;
-+ __u32 temp, reg;
-+ int finished = FALSE;
-+
-+#ifdef SPIFLASH_DEBUG
-+ printk (KERN_DEBUG "%s(addr = 0x%.8x, len = %d)\n",__FUNCTION__,instr->addr,instr->len);
-+#endif
-+
-+ /* sanity checks */
-+ if (instr->addr + instr->len > mtd->size) return (-EINVAL);
-+
-+ ptr_opcode = &stm_opcodes[SPI_SECTOR_ERASE];
-+
-+ temp = ((__u32)instr->addr << 8) | (__u32)(ptr_opcode->code);
-+ spin_lock(&spidata->mutex);
-+ spiflash_sendcmd(SPI_WRITE_ENABLE);
-+ do {
-+ schedule();
-+ reg = spiflash_regread32(SPI_FLASH_CTL);
-+ } while (reg & SPI_CTL_BUSY);
-+
-+ spiflash_regwrite32(SPI_FLASH_OPCODE, temp);
-+
-+ reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | ptr_opcode->tx_cnt | SPI_CTL_START;
-+ spiflash_regwrite32(SPI_FLASH_CTL, reg);
-+
-+ do {
-+ schedule();
-+ reg = spiflash_sendcmd(SPI_RD_STATUS);
-+ if (!(reg & SPI_STATUS_WIP)) {
-+ finished = TRUE;
-+ }
-+ } while (!finished);
-+ spin_unlock(&spidata->mutex);
-+
-+ instr->state = MTD_ERASE_DONE;
-+ if (instr->callback) instr->callback (instr);
-+
-+#ifdef SPIFLASH_DEBUG
-+ printk (KERN_DEBUG "%s return\n",__FUNCTION__);
-+#endif
-+ return (0);
-+}
-+
-+static int
-+spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf)
-+{
-+ u_char *read_addr;
-+
-+#ifdef SPIFLASH_DEBUG
-+ printk (KERN_DEBUG "%s(from = 0x%.8x, len = %d)\n",__FUNCTION__,(__u32) from,(int)len);
-+#endif
-+
-+ /* sanity checks */
-+ if (!len) return (0);
-+ if (from + len > mtd->size) return (-EINVAL);
-+
-+
-+ /* we always read len bytes */
-+ *retlen = len;
-+
-+ read_addr = (u_char *)(spidata->spiflash_readaddr + from);
-+ spin_lock(&spidata->mutex);
-+ memcpy(buf, read_addr, len);
-+ spin_unlock(&spidata->mutex);
-+
-+ return (0);
-+}
-+
-+static int
-+spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf)
-+{
-+ int done = FALSE, page_offset, bytes_left, finished;
-+ __u32 xact_len, spi_data = 0, opcode, reg;
-+
-+#ifdef SPIFLASH_DEBUG
-+ printk (KERN_DEBUG "%s(to = 0x%.8x, len = %d)\n",__FUNCTION__,(__u32) to,len);
-+#endif
-+
-+ *retlen = 0;
-+
-+ /* sanity checks */
-+ if (!len) return (0);
-+ if (to + len > mtd->size) return (-EINVAL);
-+
-+ opcode = stm_opcodes[SPI_PAGE_PROGRAM].code;
-+ bytes_left = len;
-+
-+ while (done == FALSE) {
-+ xact_len = MIN(bytes_left, sizeof(__u32));
-+
-+ /* 32-bit writes cannot span across a page boundary
-+ * (256 bytes). This types of writes require two page
-+ * program operations to handle it correctly. The STM part
-+ * will write the overflow data to the beginning of the
-+ * current page as opposed to the subsequent page.
-+ */
-+ page_offset = (to & (STM_PAGE_SIZE - 1)) + xact_len;
-+
-+ if (page_offset > STM_PAGE_SIZE) {
-+ xact_len -= (page_offset - STM_PAGE_SIZE);
-+ }
-+
-+ spin_lock(&spidata->mutex);
-+ spiflash_sendcmd(SPI_WRITE_ENABLE);
-+
-+ do {
-+ schedule();
-+ reg = spiflash_regread32(SPI_FLASH_CTL);
-+ } while (reg & SPI_CTL_BUSY);
-+
-+ switch (xact_len) {
-+ case 1:
-+ spi_data = (u32) ((u8) *buf);
-+ break;
-+ case 2:
-+ spi_data = (buf[1] << 8) | buf[0];
-+ break;
-+ case 3:
-+ spi_data = (buf[2] << 16) | (buf[1] << 8) | buf[0];
-+ break;
-+ case 4:
-+ spi_data = (buf[3] << 24) | (buf[2] << 16) |
-+ (buf[1] << 8) | buf[0];
-+ break;
-+ default:
-+ printk("spiflash_write: default case\n");
-+ break;
-+ }
-+
-+ spiflash_regwrite32(SPI_FLASH_DATA, spi_data);
-+ opcode = (opcode & SPI_OPCODE_MASK) | ((__u32)to << 8);
-+ spiflash_regwrite32(SPI_FLASH_OPCODE, opcode);
-+
-+ reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | (xact_len + 4) | SPI_CTL_START;
-+ spiflash_regwrite32(SPI_FLASH_CTL, reg);
-+ finished = FALSE;
-+
-+ do {
-+ schedule();
-+ reg = spiflash_sendcmd(SPI_RD_STATUS);
-+ if (!(reg & SPI_STATUS_WIP)) {
-+ finished = TRUE;
-+ }
-+ } while (!finished);
-+ spin_unlock(&spidata->mutex);
-+
-+ bytes_left -= xact_len;
-+ to += xact_len;
-+ buf += xact_len;
-+
-+ *retlen += xact_len;
-+
-+ if (bytes_left == 0) {
-+ done = TRUE;
-+ }
-+ }
-+
-+ return (0);
-+}
-+
-+static void __init spidata_init(void)
-+{
-+ if (spidata)
-+ return;
-+
-+ spidata = kmalloc(sizeof(struct spiflash_data), GFP_KERNEL);
-+ spin_lock_init(&spidata->mutex);
-+
-+ if (!spidata)
-+ return;
-+
-+ spidata->spiflash_mmraddr = ioremap_nocache(SPI_FLASH_MMR, SPI_FLASH_MMR_SIZE);
-+
-+ if (!spidata->spiflash_mmraddr) {
-+ printk (KERN_WARNING "%s: Failed to map flash device\n", module_name);
-+ kfree(spidata);
-+ spidata = NULL;
-+ }
-+}
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
-+#endif
-+
-+int __init
-+spiflash_init (void)
-+{
-+ int result = -1, i, j;
-+ u32 len;
-+ int index, num_parts;
-+ struct mtd_info *mtd;
-+ struct mtd_partition *mtd_parts;
-+ char *buf;
-+ struct mtd_partition *part;
-+ struct squashfs_super_block *sb;
-+ u32 config_start;
-+
-+ spidata_init();
-+
-+ if (!spidata)
-+ return (-ENXIO);
-+
-+ mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
-+ if (!mtd) {
-+ kfree(spidata);
-+ return (-ENXIO);
-+ }
-+
-+ printk ("MTD driver for SPI flash.\n");
-+ printk ("%s: Probing for Serial flash ...\n", module_name);
-+ if (!(index = spiflash_probe ())) {
-+ printk (KERN_WARNING "%s: Found no serial flash device\n", module_name);
-+ kfree(mtd);
-+ kfree(spidata);
-+ return (-ENXIO);
-+ }
-+
-+ printk ("%s: Found SPI serial Flash.\n", module_name);
-+
-+ spidata->spiflash_readaddr = ioremap_nocache(SPI_FLASH_READ, flashconfig_tbl[index].byte_cnt);
-+ if (!spidata->spiflash_readaddr) {
-+ printk (KERN_WARNING "%s: Failed to map flash device\n", module_name);
-+ kfree(mtd);
-+ kfree(spidata);
-+ return (-ENXIO);
-+ }
-+
-+ mtd->name = module_name;
-+ mtd->type = MTD_NORFLASH;
-+ mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE);
-+ mtd->size = flashconfig_tbl[index].byte_cnt;
-+ mtd->erasesize = flashconfig_tbl[index].sector_size;
-+ mtd->writesize = 1;
-+ mtd->numeraseregions = 0;
-+ mtd->eraseregions = NULL;
-+ mtd->erase = spiflash_erase;
-+ mtd->read = spiflash_read;
-+ mtd->write = spiflash_write;
-+ mtd->owner = THIS_MODULE;
-+
-+#ifdef SPIFLASH_DEBUG
-+ printk (KERN_DEBUG
-+ "mtd->name = %s\n"
-+ "mtd->size = 0x%.8x (%uM)\n"
-+ "mtd->erasesize = 0x%.8x (%uK)\n"
-+ "mtd->numeraseregions = %d\n",
-+ mtd->name,
-+ mtd->size, mtd->size / (1024*1024),
-+ mtd->erasesize, mtd->erasesize / 1024,
-+ mtd->numeraseregions);
-+
-+ if (mtd->numeraseregions) {
-+ for (result = 0; result < mtd->numeraseregions; result++) {
-+ printk (KERN_DEBUG
-+ "\n\n"
-+ "mtd->eraseregions[%d].offset = 0x%.8x\n"
-+ "mtd->eraseregions[%d].erasesize = 0x%.8x (%uK)\n"
-+ "mtd->eraseregions[%d].numblocks = %d\n",
-+ result,mtd->eraseregions[result].offset,
-+ result,mtd->eraseregions[result].erasesize,mtd->eraseregions[result].erasesize / 1024,
-+ result,mtd->eraseregions[result].numblocks);
-+ }
-+ }
-+#endif
-+
-+ /* parse redboot partitions */
-+ num_parts = parse_mtd_partitions(mtd, part_probe_types, &spidata->parsed_parts, 0);
-+
-+ mtd_parts = kzalloc(sizeof(struct mtd_partition) * MAX_PARTS, GFP_KERNEL);
-+ buf = kmalloc(mtd->erasesize, GFP_KERNEL);
-+ sb = (struct squashfs_super_block *) buf;
-+ for (i = j = 0; i < num_parts; i++, j++) {
-+ part = &mtd_parts[j];
-+ memcpy(part, &spidata->parsed_parts[i], sizeof(struct mtd_partition));
-+
-+ if (!strcmp(part->name, ROOTFS_NAME)) {
-+ /* create the root device */
-+ ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, i);
-+
-+ part->size -= mtd->erasesize;
-+ config_start = part->offset + part->size;
-+
-+ while ((mtd->read(mtd, part->offset, mtd->erasesize, &len, buf) == 0) &&
-+ (len == mtd->erasesize) &&
-+ (*((u32 *) buf) == SQUASHFS_MAGIC) &&
-+ (sb->bytes_used > 0)) {
-+
-+ /* this is squashfs, allocate another partition starting from the end of filesystem data */
-+ memcpy(&mtd_parts[j + 1], part, sizeof(struct mtd_partition));
-+
-+ len = (u32) sb->bytes_used;
-+ len += (part->offset & 0x000fffff);
-+ len += (mtd->erasesize - 1);
-+ len &= ~(mtd->erasesize - 1);
-+ len -= (part->offset & 0x000fffff);
-+
-+ if (len + mtd->erasesize > part->size)
-+ break;
-+
-+ part = &mtd_parts[++j];
-+
-+ part->offset += len;
-+ part->size -= len;
-+
-+ part->name = kmalloc(10, GFP_KERNEL);
-+ sprintf(part->name, "rootfs%d", j - i);
-+ }
-+ }
-+ if (!strcmp(part->name, "RedBoot config")) {
-+ /* add anoterh partition for the board config data */
-+ memcpy(&mtd_parts[j + 1], part, sizeof(struct mtd_partition));
-+ j++;
-+ part = &mtd_parts[j];
-+ part->offset += part->size;
-+ part->size = mtd->erasesize;
-+
-+ part->name = kmalloc(16, GFP_KERNEL);
-+ sprintf(part->name, "board_config");
-+ }
-+ }
-+ num_parts += j - i;
-+ kfree(buf);
-+
-+#ifdef SPIFLASH_DEBUG
-+ printk (KERN_DEBUG "Found %d redboot partitions\n", num_parts);
-+#endif
-+ if (num_parts) {
-+ result = add_mtd_partitions(mtd, mtd_parts, num_parts);
-+ } else {
-+#ifdef SPIFLASH_DEBUG
-+ printk (KERN_DEBUG "Did not find any redboot partitions\n");
-+#endif
-+ kfree(mtd);
-+ kfree(spidata);
-+ return (-ENXIO);
-+ }
-+
-+ spidata->mtd = mtd;
-+
-+ return (result);
-+}
-+
-+void __exit
-+spiflash_exit (void)
-+{
-+ if (spidata && spidata->parsed_parts) {
-+ del_mtd_partitions (spidata->mtd);
-+ kfree(spidata->mtd);
-+ kfree(spidata);
-+ }
-+}
-+
-+module_init (spiflash_init);
-+module_exit (spiflash_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Atheros Communications Inc");
-+MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros SOC");
-+
-diff -urN linux.old/drivers/mtd/devices/spiflash.h linux.dev/drivers/mtd/devices/spiflash.h
---- linux.old/drivers/mtd/devices/spiflash.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/mtd/devices/spiflash.h 2006-12-15 06:59:43.000000000 +0100
-@@ -0,0 +1,124 @@
-+/*
-+ * SPI Flash Memory support header file.
-+ *
-+ * $Id: //depot/sw/releases/linuxsrc/src/kernels/mips-linux-2.4.25/drivers/mtd/devices/spiflash.h#3 $
-+ *
-+ *
-+ * Copyright (c) 2005, Atheros Communications Inc.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This code is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+#define FLASH_1MB 1
-+#define FLASH_2MB 2
-+#define FLASH_4MB 3
-+#define FLASH_8MB 4
-+#define MAX_FLASH 5
-+
-+#define STM_PAGE_SIZE 256
-+
-+#define SPI_WRITE_ENABLE 0
-+#define SPI_WRITE_DISABLE 1
-+#define SPI_RD_STATUS 2
-+#define SPI_WR_STATUS 3
-+#define SPI_RD_DATA 4
-+#define SPI_FAST_RD_DATA 5
-+#define SPI_PAGE_PROGRAM 6
-+#define SPI_SECTOR_ERASE 7
-+#define SPI_BULK_ERASE 8
-+#define SPI_DEEP_PWRDOWN 9
-+#define SPI_RD_SIG 10
-+#define SPI_MAX_OPCODES 11
-+
-+#define SFI_WRITE_BUFFER_SIZE 4
-+#define SFI_FLASH_ADDR_MASK 0x00ffffff
-+
-+#define STM_8MBIT_SIGNATURE 0x13
-+#define STM_M25P80_BYTE_COUNT 1048576
-+#define STM_M25P80_SECTOR_COUNT 16
-+#define STM_M25P80_SECTOR_SIZE 0x10000
-+
-+#define STM_16MBIT_SIGNATURE 0x14
-+#define STM_M25P16_BYTE_COUNT 2097152
-+#define STM_M25P16_SECTOR_COUNT 32
-+#define STM_M25P16_SECTOR_SIZE 0x10000
-+
-+#define STM_32MBIT_SIGNATURE 0x15
-+#define STM_M25P32_BYTE_COUNT 4194304
-+#define STM_M25P32_SECTOR_COUNT 64
-+#define STM_M25P32_SECTOR_SIZE 0x10000
-+
-+#define STM_64MBIT_SIGNATURE 0x16
-+#define STM_M25P64_BYTE_COUNT 8388608
-+#define STM_M25P64_SECTOR_COUNT 128
-+#define STM_M25P64_SECTOR_SIZE 0x10000
-+
-+#define STM_1MB_BYTE_COUNT STM_M25P80_BYTE_COUNT
-+#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT
-+#define STM_1MB_SECTOR_SIZE STM_M25P80_SECTOR_SIZE
-+#define STM_2MB_BYTE_COUNT STM_M25P16_BYTE_COUNT
-+#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT
-+#define STM_2MB_SECTOR_SIZE STM_M25P16_SECTOR_SIZE
-+#define STM_4MB_BYTE_COUNT STM_M25P32_BYTE_COUNT
-+#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT
-+#define STM_4MB_SECTOR_SIZE STM_M25P32_SECTOR_SIZE
-+#define STM_8MB_BYTE_COUNT STM_M25P64_BYTE_COUNT
-+#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT
-+#define STM_8MB_SECTOR_SIZE STM_M25P64_SECTOR_SIZE
-+
-+/*
-+ * ST Microelectronics Opcodes for Serial Flash
-+ */
-+
-+#define STM_OP_WR_ENABLE 0x06 /* Write Enable */
-+#define STM_OP_WR_DISABLE 0x04 /* Write Disable */
-+#define STM_OP_RD_STATUS 0x05 /* Read Status */
-+#define STM_OP_WR_STATUS 0x01 /* Write Status */
-+#define STM_OP_RD_DATA 0x03 /* Read Data */
-+#define STM_OP_FAST_RD_DATA 0x0b /* Fast Read Data */
-+#define STM_OP_PAGE_PGRM 0x02 /* Page Program */
-+#define STM_OP_SECTOR_ERASE 0xd8 /* Sector Erase */
-+#define STM_OP_BULK_ERASE 0xc7 /* Bulk Erase */
-+#define STM_OP_DEEP_PWRDOWN 0xb9 /* Deep Power-Down Mode */
-+#define STM_OP_RD_SIG 0xab /* Read Electronic Signature */
-+
-+#define STM_STATUS_WIP 0x01 /* Write-In-Progress */
-+#define STM_STATUS_WEL 0x02 /* Write Enable Latch */
-+#define STM_STATUS_BP0 0x04 /* Block Protect 0 */
-+#define STM_STATUS_BP1 0x08 /* Block Protect 1 */
-+#define STM_STATUS_BP2 0x10 /* Block Protect 2 */
-+#define STM_STATUS_SRWD 0x80 /* Status Register Write Disable */
-+
-+/*
-+ * SPI Flash Interface Registers
-+ */
-+#define AR531XPLUS_SPI_READ 0x08000000
-+#define AR531XPLUS_SPI_MMR 0x11300000
-+#define AR531XPLUS_SPI_MMR_SIZE 12
-+
-+#define AR531XPLUS_SPI_CTL 0x00
-+#define AR531XPLUS_SPI_OPCODE 0x04
-+#define AR531XPLUS_SPI_DATA 0x08
-+
-+#define SPI_FLASH_READ AR531XPLUS_SPI_READ
-+#define SPI_FLASH_MMR AR531XPLUS_SPI_MMR
-+#define SPI_FLASH_MMR_SIZE AR531XPLUS_SPI_MMR_SIZE
-+#define SPI_FLASH_CTL AR531XPLUS_SPI_CTL
-+#define SPI_FLASH_OPCODE AR531XPLUS_SPI_OPCODE
-+#define SPI_FLASH_DATA AR531XPLUS_SPI_DATA
-+
-+#define SPI_CTL_START 0x00000100
-+#define SPI_CTL_BUSY 0x00010000
-+#define SPI_CTL_TXCNT_MASK 0x0000000f
-+#define SPI_CTL_RXCNT_MASK 0x000000f0
-+#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
-+#define SPI_CTL_SIZE_MASK 0x00060000
-+
-+#define SPI_CTL_CLK_SEL_MASK 0x03000000
-+#define SPI_OPCODE_MASK 0x000000ff
-+
-+#define SPI_STATUS_WIP STM_STATUS_WIP
diff --git a/target/linux/atheros-2.6/patches/120-enable_wireless_for_ahb.patch b/target/linux/atheros-2.6/patches/120-enable_wireless_for_ahb.patch
index 616f394584..a959cba9c3 100644
--- a/target/linux/atheros-2.6/patches/120-enable_wireless_for_ahb.patch
+++ b/target/linux/atheros-2.6/patches/120-enable_wireless_for_ahb.patch
@@ -6,7 +6,7 @@ diff -urN linux.old/drivers/net/wireless/Kconfig linux.dev/drivers/net/wireless/
config NET_WIRELESS
bool
- depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA)
-+ depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA || AR531X)
++ depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA || ATHEROS)
default y
endmenu
diff --git a/target/linux/atheros-2.6/patches/130-ar2313_ethernet.patch b/target/linux/atheros-2.6/patches/130-ar2313_ethernet.patch
index 7040543351..960c736ae9 100644
--- a/target/linux/atheros-2.6/patches/130-ar2313_ethernet.patch
+++ b/target/linux/atheros-2.6/patches/130-ar2313_ethernet.patch
@@ -1,2048 +1,3 @@
-diff -urN linux.old/drivers/net/ar2313/ar2313.c linux.eth/drivers/net/ar2313/ar2313.c
---- linux.old/drivers/net/ar2313/ar2313.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.eth/drivers/net/ar2313/ar2313.c 2006-12-16 04:30:44.000000000 +0100
-@@ -0,0 +1,1545 @@
-+/*
-+ * ar2313.c: Linux driver for the Atheros AR231z Ethernet device.
-+ *
-+ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * Thanks to Atheros for providing hardware and documentation
-+ * enabling me to write this driver.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * Additional credits:
-+ * This code is taken from John Taylor's Sibyte driver and then
-+ * modified for the AR2313.
-+ */
-+
-+#include <linux/autoconf.h>
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/pci.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/mm.h>
-+#include <linux/highmem.h>
-+#include <linux/sockios.h>
-+#include <linux/pkt_sched.h>
-+#include <linux/compile.h>
-+#include <linux/mii.h>
-+#include <linux/ethtool.h>
-+#include <linux/ctype.h>
-+#include <linux/platform_device.h>
-+
-+#include <net/sock.h>
-+#include <net/ip.h>
-+
-+#include <asm/system.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/byteorder.h>
-+#include <asm/uaccess.h>
-+#include <asm/bootinfo.h>
-+
-+#include <ar531x_platform.h>
-+
-+#undef INDEX_DEBUG
-+#define DEBUG 0
-+#define DEBUG_TX 0
-+#define DEBUG_RX 0
-+#define DEBUG_INT 0
-+#define DEBUG_MC 0
-+#define DEBUG_ERR 1
-+
-+#ifndef min
-+#define min(a,b) (((a)<(b))?(a):(b))
-+#endif
-+
-+#ifndef SMP_CACHE_BYTES
-+#define SMP_CACHE_BYTES L1_CACHE_BYTES
-+#endif
-+
-+#ifndef SET_MODULE_OWNER
-+#define SET_MODULE_OWNER(dev) {do{} while(0);}
-+#define AR2313_MOD_INC_USE_COUNT MOD_INC_USE_COUNT
-+#define AR2313_MOD_DEC_USE_COUNT MOD_DEC_USE_COUNT
-+#else
-+#define AR2313_MOD_INC_USE_COUNT {do{} while(0);}
-+#define AR2313_MOD_DEC_USE_COUNT {do{} while(0);}
-+#endif
-+
-+#define PHYSADDR(a) ((_ACAST32_ (a)) & 0x1fffffff)
-+
-+static char ifname[5] = "bond";
-+
-+module_param_string(ifname, ifname, 5, 0);
-+
-+#define AR2313_MBOX_SET_BIT 0x8
-+
-+#define BOARD_IDX_STATIC 0
-+#define BOARD_IDX_OVERFLOW -1
-+
-+#include "ar2313_msg.h"
-+#include "platform.h"
-+#include "dma.h"
-+#include "ar2313.h"
-+
-+/*
-+ * New interrupt handler strategy:
-+ *
-+ * An old interrupt handler worked using the traditional method of
-+ * replacing an skbuff with a new one when a packet arrives. However
-+ * the rx rings do not need to contain a static number of buffer
-+ * descriptors, thus it makes sense to move the memory allocation out
-+ * of the main interrupt handler and do it in a bottom half handler
-+ * and only allocate new buffers when the number of buffers in the
-+ * ring is below a certain threshold. In order to avoid starving the
-+ * NIC under heavy load it is however necessary to force allocation
-+ * when hitting a minimum threshold. The strategy for alloction is as
-+ * follows:
-+ *
-+ * RX_LOW_BUF_THRES - allocate buffers in the bottom half
-+ * RX_PANIC_LOW_THRES - we are very low on buffers, allocate
-+ * the buffers in the interrupt handler
-+ * RX_RING_THRES - maximum number of buffers in the rx ring
-+ *
-+ * One advantagous side effect of this allocation approach is that the
-+ * entire rx processing can be done without holding any spin lock
-+ * since the rx rings and registers are totally independent of the tx
-+ * ring and its registers. This of course includes the kmalloc's of
-+ * new skb's. Thus start_xmit can run in parallel with rx processing
-+ * and the memory allocation on SMP systems.
-+ *
-+ * Note that running the skb reallocation in a bottom half opens up
-+ * another can of races which needs to be handled properly. In
-+ * particular it can happen that the interrupt handler tries to run
-+ * the reallocation while the bottom half is either running on another
-+ * CPU or was interrupted on the same CPU. To get around this the
-+ * driver uses bitops to prevent the reallocation routines from being
-+ * reentered.
-+ *
-+ * TX handling can also be done without holding any spin lock, wheee
-+ * this is fun! since tx_csm is only written to by the interrupt
-+ * handler.
-+ */
-+
-+/*
-+ * Threshold values for RX buffer allocation - the low water marks for
-+ * when to start refilling the rings are set to 75% of the ring
-+ * sizes. It seems to make sense to refill the rings entirely from the
-+ * intrrupt handler once it gets below the panic threshold, that way
-+ * we don't risk that the refilling is moved to another CPU when the
-+ * one running the interrupt handler just got the slab code hot in its
-+ * cache.
-+ */
-+#define RX_RING_SIZE AR2313_DESCR_ENTRIES
-+#define RX_PANIC_THRES (RX_RING_SIZE/4)
-+#define RX_LOW_THRES ((3*RX_RING_SIZE)/4)
-+#define CRC_LEN 4
-+#define RX_OFFSET 2
-+
-+#define AR2313_BUFSIZE (AR2313_MTU + ETH_HLEN + CRC_LEN + RX_OFFSET)
-+
-+#ifdef MODULE
-+MODULE_AUTHOR("Sameer Dekate <sdekate@arubanetworks.com>, Imre Kaloz <kaloz@openwrt.org>, Felix Fietkau <nbd@openwrt.org>");
-+MODULE_DESCRIPTION("AR2313 Ethernet driver");
-+#endif
-+
-+#if DEBUG
-+static char version[] __initdata =
-+ "ar2313.c: v0.03 2006/07/12 sdekate@arubanetworks.com\n";
-+#endif /* DEBUG */
-+
-+#define virt_to_phys(x) ((u32)(x) & 0x1fffffff)
-+
-+// prototypes
-+static short armiiread(short phy, short reg);
-+static void armiiwrite(short phy, short reg, short data);
-+#ifdef TX_TIMEOUT
-+static void ar2313_tx_timeout(struct net_device *dev);
-+#endif
-+static void ar2313_halt(struct net_device *dev);
-+static void rx_tasklet_func(unsigned long data);
-+static void ar2313_multicast_list(struct net_device *dev);
-+
-+static int probed __initdata = 0;
-+static unsigned long ar_eth_base;
-+static unsigned long ar_dma_base;
-+static unsigned long ar_int_base;
-+static unsigned long ar_int_mac_mask;
-+static unsigned long ar_int_phy_mask;
-+
-+#ifndef ERR
-+#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
-+#endif
-+
-+
-+int __init ar2313_probe(struct platform_device *pdev)
-+{
-+ struct net_device *dev;
-+ struct ar2313_private *sp;
-+ struct ar531x_eth *cfg;
-+ struct resource *res;
-+ int version_disp;
-+ char name[64] ;
-+
-+ if (probed)
-+ return -ENODEV;
-+ probed++;
-+
-+ version_disp = 0;
-+ sprintf(name, "%s%%d", ifname) ;
-+ dev = alloc_etherdev(sizeof(struct ar2313_private));
-+
-+ if (dev == NULL) {
-+ printk(KERN_ERR "ar2313: Unable to allocate net_device structure!\n");
-+ return -ENOMEM;
-+ }
-+
-+ SET_MODULE_OWNER(dev);
-+ platform_set_drvdata(pdev, dev);
-+
-+ sp = dev->priv;
-+ sp->dev = dev;
-+ cfg = pdev->dev.platform_data;
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "eth_membase");
-+ if (!res)
-+ return -ENODEV;
-+
-+ sp->link = 0;
-+ ar_eth_base = res->start;
-+ ar_dma_base = ar_eth_base + 0x1000;
-+ ar_int_base = cfg->reset_base;
-+ ar_int_mac_mask = cfg->reset_mac;
-+ ar_int_phy_mask = cfg->reset_phy;
-+ sp->phy = cfg->phy;
-+
-+ dev->irq = platform_get_irq_byname(pdev, "eth_irq");
-+
-+ spin_lock_init(&sp->lock);
-+
-+ /* initialize func pointers */
-+ dev->open = &ar2313_open;
-+ dev->stop = &ar2313_close;
-+ dev->hard_start_xmit = &ar2313_start_xmit;
-+
-+ dev->get_stats = &ar2313_get_stats;
-+ dev->set_multicast_list = &ar2313_multicast_list;
-+#ifdef TX_TIMEOUT
-+ dev->tx_timeout = ar2313_tx_timeout;
-+ dev->watchdog_timeo = AR2313_TX_TIMEOUT;
-+#endif
-+ dev->do_ioctl = &ar2313_ioctl;
-+
-+ // SAMEER: do we need this?
-+ dev->features |= NETIF_F_SG | NETIF_F_HIGHDMA;
-+
-+ tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev);
-+ tasklet_disable(&sp->rx_tasklet);
-+
-+ /* display version info if adapter is found */
-+ if (!version_disp) {
-+ /* set display flag to TRUE so that */
-+ /* we only display this string ONCE */
-+ version_disp = 1;
-+#if DEBUG
-+ printk(version);
-+#endif /* DEBUG */
-+ }
-+
-+#if 0
-+ request_region(PHYSADDR(ar_eth_base), ETHERNET_SIZE*ETHERNET_MACS,
-+ "AR2313ENET");
-+#endif
-+
-+ sp->eth_regs = ioremap_nocache(PHYSADDR(ar_eth_base), sizeof(*sp->eth_regs));
-+ if (!sp->eth_regs) {
-+ printk("Can't remap eth registers\n");
-+ return(-ENXIO);
-+ }
-+
-+ sp->dma_regs = ioremap_nocache(PHYSADDR(ar_eth_base + 0x1000), sizeof(*sp->dma_regs));
-+ dev->base_addr = (unsigned int) sp->dma_regs;
-+ if (!sp->dma_regs) {
-+ printk("Can't remap DMA registers\n");
-+ return(-ENXIO);
-+ }
-+
-+ sp->int_regs = ioremap_nocache(PHYSADDR(ar_int_base), 4);
-+ if (!sp->int_regs) {
-+ printk("Can't remap INTERRUPT registers\n");
-+ return(-ENXIO);
-+ }
-+
-+ strncpy(sp->name, "Atheros AR2313", sizeof (sp->name) - 1);
-+ sp->name [sizeof (sp->name) - 1] = '\0';
-+
-+ {
-+ /* XXX: Will have to rewrite this part later */
-+ char *configstart;
-+ unsigned char def_mac[6] = {0, 0xaa, 0xbb, 0xcc, 0xdd, 0xee};
-+
-+ configstart = (char *) cfg->board_config;
-+
-+ if (!configstart) {
-+ printk("no valid mac found, using defaults");
-+ memcpy(dev->dev_addr, def_mac, 6);
-+ } else {
-+ memcpy(dev->dev_addr, ((u8 *)configstart)+102, 6);
-+ }
-+ }
-+
-+ sp->board_idx = BOARD_IDX_STATIC;
-+
-+ if (ar2313_init(dev)) {
-+ /*
-+ * ar2313_init() calls ar2313_init_cleanup() on error.
-+ */
-+ kfree(dev);
-+ return -ENODEV;
-+ }
-+
-+ if (register_netdev(dev)){
-+ printk("%s: register_netdev failed\n", __func__);
-+ return -1;
-+ }
-+
-+ printk("%s: %s: %02x:%02x:%02x:%02x:%02x:%02x, irq %d\n",
-+ dev->name, sp->name,
-+ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
-+ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5],
-+ dev->irq);
-+
-+ /* start link poll timer */
-+ ar2313_setup_timer(dev);
-+
-+ return 0;
-+}
-+
-+#if 0
-+static void ar2313_dump_regs(struct net_device *dev)
-+{
-+ unsigned int *ptr, i;
-+ struct ar2313_private *sp = (struct ar2313_private *)dev->priv;
-+
-+ ptr = (unsigned int *)sp->eth_regs;
-+ for(i=0; i< (sizeof(ETHERNET_STRUCT)/ sizeof(unsigned int)); i++, ptr++) {
-+ printk("ENET: %08x = %08x\n", (int)ptr, *ptr);
-+ }
-+
-+ ptr = (unsigned int *)sp->dma_regs;
-+ for(i=0; i< (sizeof(DMA)/ sizeof(unsigned int)); i++, ptr++) {
-+ printk("DMA: %08x = %08x\n", (int)ptr, *ptr);
-+ }
-+
-+ ptr = (unsigned int *)sp->int_regs;
-+ for(i=0; i< (sizeof(INTERRUPT)/ sizeof(unsigned int)); i++, ptr++){
-+ printk("INT: %08x = %08x\n", (int)ptr, *ptr);
-+ }
-+
-+ for (i = 0; i < AR2313_DESCR_ENTRIES; i++) {
-+ ar2313_descr_t *td = &sp->tx_ring[i];
-+ printk("Tx desc %2d: %08x %08x %08x %08x\n", i,
-+ td->status, td->devcs, td->addr, td->descr);
-+ }
-+}
-+#endif
-+
-+#ifdef TX_TIMEOUT
-+static void
-+ar2313_tx_timeout(struct net_device *dev)
-+{
-+ struct ar2313_private *sp = (struct ar2313_private *)dev->priv;
-+ unsigned long flags;
-+
-+#if DEBUG_TX
-+ printk("Tx timeout\n");
-+#endif
-+ spin_lock_irqsave(&sp->lock, flags);
-+ ar2313_restart(dev);
-+ spin_unlock_irqrestore(&sp->lock, flags);
-+}
-+#endif
-+
-+#if DEBUG_MC
-+static void
-+printMcList(struct net_device *dev)
-+{
-+ struct dev_mc_list *list = dev->mc_list;
-+ int num=0, i;
-+ while(list){
-+ printk("%d MC ADDR ", num);
-+ for(i=0;i<list->dmi_addrlen;i++) {
-+ printk(":%02x", list->dmi_addr[i]);
-+ }
-+ list = list->next;
-+ printk("\n");
-+ }
-+}
-+#endif
-+
-+/*
-+ * Set or clear the multicast filter for this adaptor.
-+ * THIS IS ABSOLUTE CRAP, disabled
-+ */
-+static void
-+ar2313_multicast_list(struct net_device *dev)
-+{
-+ /*
-+ * Always listen to broadcasts and
-+ * treat IFF bits independently
-+ */
-+ struct ar2313_private *sp = (struct ar2313_private *)dev->priv;
-+ unsigned int recognise;
-+
-+ recognise = sp->eth_regs->mac_control;
-+
-+ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
-+ recognise |= MAC_CONTROL_PR;
-+ } else {
-+ recognise &= ~MAC_CONTROL_PR;
-+ }
-+
-+ if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 15)) {
-+#if DEBUG_MC
-+ printMcList(dev);
-+ printk("%s: all MULTICAST mc_count %d\n", __FUNCTION__, dev->mc_count);
-+#endif
-+ recognise |= MAC_CONTROL_PM;/* all multicast */
-+ } else if (dev->mc_count > 0) {
-+#if DEBUG_MC
-+ printMcList(dev);
-+ printk("%s: mc_count %d\n", __FUNCTION__, dev->mc_count);
-+#endif
-+ recognise |= MAC_CONTROL_PM; /* for the time being */
-+ }
-+#if DEBUG_MC
-+ printk("%s: setting %08x to %08x\n", __FUNCTION__, (int)sp->eth_regs, recognise);
-+#endif
-+
-+ sp->eth_regs->mac_control = recognise;
-+}
-+
-+static void rx_tasklet_cleanup(struct net_device *dev)
-+{
-+ struct ar2313_private *sp = dev->priv;
-+
-+ /*
-+ * Tasklet may be scheduled. Need to get it removed from the list
-+ * since we're about to free the struct.
-+ */
-+
-+ sp->unloading = 1;
-+ tasklet_enable(&sp->rx_tasklet);
-+ tasklet_kill(&sp->rx_tasklet);
-+}
-+
-+static int __exit ar2313_remove(struct platform_device *pdev)
-+{
-+ struct net_device *dev = platform_get_drvdata(pdev);
-+ rx_tasklet_cleanup(dev);
-+ ar2313_init_cleanup(dev);
-+ unregister_netdev(dev);
-+ kfree(dev);
-+ return 0;
-+}
-+
-+
-+/*
-+ * Restart the AR2313 ethernet controller.
-+ */
-+static int ar2313_restart(struct net_device *dev)
-+{
-+ /* disable interrupts */
-+ disable_irq(dev->irq);
-+
-+ /* stop mac */
-+ ar2313_halt(dev);
-+
-+ /* initialize */
-+ ar2313_init(dev);
-+
-+ /* enable interrupts */
-+ enable_irq(dev->irq);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver ar2313_driver = {
-+ .driver.name = "ar531x-eth",
-+ .probe = ar2313_probe,
-+ .remove = ar2313_remove,
-+};
-+
-+int __init ar2313_module_init(void)
-+{
-+ return platform_driver_register(&ar2313_driver);
-+}
-+
-+void __exit ar2313_module_cleanup(void)
-+{
-+ platform_driver_unregister(&ar2313_driver);
-+}
-+
-+module_init(ar2313_module_init);
-+module_exit(ar2313_module_cleanup);
-+
-+
-+static void ar2313_free_descriptors(struct net_device *dev)
-+{
-+ struct ar2313_private *sp = dev->priv;
-+ if (sp->rx_ring != NULL) {
-+ kfree((void*)KSEG0ADDR(sp->rx_ring));
-+ sp->rx_ring = NULL;
-+ sp->tx_ring = NULL;
-+ }
-+}
-+
-+
-+static int ar2313_allocate_descriptors(struct net_device *dev)
-+{
-+ struct ar2313_private *sp = dev->priv;
-+ int size;
-+ int j;
-+ ar2313_descr_t *space;
-+
-+ if(sp->rx_ring != NULL){
-+ printk("%s: already done.\n", __FUNCTION__);
-+ return 0;
-+ }
-+
-+ size = (sizeof(ar2313_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES));
-+ space = kmalloc(size, GFP_KERNEL);
-+ if (space == NULL)
-+ return 1;
-+
-+ /* invalidate caches */
-+ dma_cache_inv((unsigned int)space, size);
-+
-+ /* now convert pointer to KSEG1 */
-+ space = (ar2313_descr_t *)KSEG1ADDR(space);
-+
-+ memset((void *)space, 0, size);
-+
-+ sp->rx_ring = space;
-+ space += AR2313_DESCR_ENTRIES;
-+
-+ sp->tx_ring = space;
-+ space += AR2313_DESCR_ENTRIES;
-+
-+ /* Initialize the transmit Descriptors */
-+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+ ar2313_descr_t *td = &sp->tx_ring[j];
-+ td->status = 0;
-+ td->devcs = DMA_TX1_CHAINED;
-+ td->addr = 0;
-+ td->descr = K1_TO_PHYS(&sp->tx_ring[(j+1) & (AR2313_DESCR_ENTRIES-1)]);
-+ }
-+
-+ return 0;
-+}
-+
-+
-+/*
-+ * Generic cleanup handling data allocated during init. Used when the
-+ * module is unloaded or if an error occurs during initialization
-+ */
-+static void ar2313_init_cleanup(struct net_device *dev)
-+{
-+ struct ar2313_private *sp = dev->priv;
-+ struct sk_buff *skb;
-+ int j;
-+
-+ ar2313_free_descriptors(dev);
-+
-+ if (sp->eth_regs) iounmap((void*)sp->eth_regs);
-+ if (sp->dma_regs) iounmap((void*)sp->dma_regs);
-+
-+ if (sp->rx_skb) {
-+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+ skb = sp->rx_skb[j];
-+ if (skb) {
-+ sp->rx_skb[j] = NULL;
-+ dev_kfree_skb(skb);
-+ }
-+ }
-+ kfree(sp->rx_skb);
-+ sp->rx_skb = NULL;
-+ }
-+
-+ if (sp->tx_skb) {
-+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+ skb = sp->tx_skb[j];
-+ if (skb) {
-+ sp->tx_skb[j] = NULL;
-+ dev_kfree_skb(skb);
-+ }
-+ }
-+ kfree(sp->tx_skb);
-+ sp->tx_skb = NULL;
-+ }
-+}
-+
-+static int ar2313_setup_timer(struct net_device *dev)
-+{
-+ struct ar2313_private *sp = dev->priv;
-+
-+ init_timer(&sp->link_timer);
-+
-+ sp->link_timer.function = ar2313_link_timer_fn;
-+ sp->link_timer.data = (int) dev;
-+ sp->link_timer.expires = jiffies + HZ;
-+
-+ add_timer(&sp->link_timer);
-+ return 0;
-+
-+}
-+
-+static void ar2313_link_timer_fn(unsigned long data)
-+{
-+ struct net_device *dev = (struct net_device *) data;
-+ struct ar2313_private *sp = dev->priv;
-+
-+ // see if the link status changed
-+ // This was needed to make sure we set the PHY to the
-+ // autonegotiated value of half or full duplex.
-+ ar2313_check_link(dev);
-+
-+ // Loop faster when we don't have link.
-+ // This was needed to speed up the AP bootstrap time.
-+ if(sp->link == 0) {
-+ mod_timer(&sp->link_timer, jiffies + HZ/2);
-+ } else {
-+ mod_timer(&sp->link_timer, jiffies + LINK_TIMER);
-+ }
-+}
-+
-+static void ar2313_check_link(struct net_device *dev)
-+{
-+ struct ar2313_private *sp = dev->priv;
-+ u16 phyData;
-+
-+ phyData = armiiread(sp->phy, MII_BMSR);
-+ if (sp->phyData != phyData) {
-+ if (phyData & BMSR_LSTATUS) {
-+ /* link is present, ready link partner ability to deterine duplexity */
-+ int duplex = 0;
-+ u16 reg;
-+
-+ sp->link = 1;
-+ reg = armiiread(sp->phy, MII_BMCR);
-+ if (reg & BMCR_ANENABLE) {
-+ /* auto neg enabled */
-+ reg = armiiread(sp->phy, MII_LPA);
-+ duplex = (reg & (LPA_100FULL|LPA_10FULL))? 1:0;
-+ } else {
-+ /* no auto neg, just read duplex config */
-+ duplex = (reg & BMCR_FULLDPLX)? 1:0;
-+ }
-+
-+ printk(KERN_INFO "%s: Configuring MAC for %s duplex\n", dev->name,
-+ (duplex)? "full":"half");
-+
-+ if (duplex) {
-+ /* full duplex */
-+ sp->eth_regs->mac_control = ((sp->eth_regs->mac_control | MAC_CONTROL_F) &
-+ ~MAC_CONTROL_DRO);
-+ } else {
-+ /* half duplex */
-+ sp->eth_regs->mac_control = ((sp->eth_regs->mac_control | MAC_CONTROL_DRO) &
-+ ~MAC_CONTROL_F);
-+ }
-+ } else {
-+ /* no link */
-+ sp->link = 0;
-+ }
-+ sp->phyData = phyData;
-+ }
-+}
-+
-+static int
-+ar2313_reset_reg(struct net_device *dev)
-+{
-+ struct ar2313_private *sp = (struct ar2313_private *)dev->priv;
-+ unsigned int ethsal, ethsah;
-+ unsigned int flags;
-+
-+ *sp->int_regs |= ar_int_mac_mask;
-+ mdelay(10);
-+ *sp->int_regs &= ~ar_int_mac_mask;
-+ mdelay(10);
-+ *sp->int_regs |= ar_int_phy_mask;
-+ mdelay(10);
-+ *sp->int_regs &= ~ar_int_phy_mask;
-+ mdelay(10);
-+
-+ sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR);
-+ mdelay(10);
-+ sp->dma_regs->bus_mode = ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE);
-+
-+ /* enable interrupts */
-+ sp->dma_regs->intr_ena = (DMA_STATUS_AIS |
-+ DMA_STATUS_NIS |
-+ DMA_STATUS_RI |
-+ DMA_STATUS_TI |
-+ DMA_STATUS_FBE);
-+ sp->dma_regs->xmt_base = K1_TO_PHYS(sp->tx_ring);
-+ sp->dma_regs->rcv_base = K1_TO_PHYS(sp->rx_ring);
-+ sp->dma_regs->control = (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF);
-+
-+ sp->eth_regs->flow_control = (FLOW_CONTROL_FCE);
-+ sp->eth_regs->vlan_tag = (0x8100);
-+
-+ /* Enable Ethernet Interface */
-+ flags = (MAC_CONTROL_TE | /* transmit enable */
-+ MAC_CONTROL_PM | /* pass mcast */
-+ MAC_CONTROL_F | /* full duplex */
-+ MAC_CONTROL_HBD); /* heart beat disabled */
-+
-+ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
-+ flags |= MAC_CONTROL_PR;
-+ }
-+ sp->eth_regs->mac_control = flags;
-+
-+ /* Set all Ethernet station address registers to their initial values */
-+ ethsah = ((((u_int)(dev->dev_addr[5]) << 8) & (u_int)0x0000FF00) |
-+ (((u_int)(dev->dev_addr[4]) << 0) & (u_int)0x000000FF));
-+
-+ ethsal = ((((u_int)(dev->dev_addr[3]) << 24) & (u_int)0xFF000000) |
-+ (((u_int)(dev->dev_addr[2]) << 16) & (u_int)0x00FF0000) |
-+ (((u_int)(dev->dev_addr[1]) << 8) & (u_int)0x0000FF00) |
-+ (((u_int)(dev->dev_addr[0]) << 0) & (u_int)0x000000FF) );
-+
-+ sp->eth_regs->mac_addr[0] = ethsah;
-+ sp->eth_regs->mac_addr[1] = ethsal;
-+
-+ mdelay(10);
-+
-+ return(0);
-+}
-+
-+
-+static int ar2313_init(struct net_device *dev)
-+{
-+ struct ar2313_private *sp = dev->priv;
-+ int ecode=0;
-+
-+ /*
-+ * Allocate descriptors
-+ */
-+ if (ar2313_allocate_descriptors(dev)) {
-+ printk("%s: %s: ar2313_allocate_descriptors failed\n",
-+ dev->name, __FUNCTION__);
-+ ecode = -EAGAIN;
-+ goto init_error;
-+ }
-+
-+ /*
-+ * Get the memory for the skb rings.
-+ */
-+ if(sp->rx_skb == NULL) {
-+ sp->rx_skb = kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES, GFP_KERNEL);
-+ if (!(sp->rx_skb)) {
-+ printk("%s: %s: rx_skb kmalloc failed\n",
-+ dev->name, __FUNCTION__);
-+ ecode = -EAGAIN;
-+ goto init_error;
-+ }
-+ }
-+ memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
-+
-+ if(sp->tx_skb == NULL) {
-+ sp->tx_skb = kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES, GFP_KERNEL);
-+ if (!(sp->tx_skb)) {
-+ printk("%s: %s: tx_skb kmalloc failed\n",
-+ dev->name, __FUNCTION__);
-+ ecode = -EAGAIN;
-+ goto init_error;
-+ }
-+ }
-+ memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
-+
-+ /*
-+ * Set tx_csm before we start receiving interrupts, otherwise
-+ * the interrupt handler might think it is supposed to process
-+ * tx ints before we are up and running, which may cause a null
-+ * pointer access in the int handler.
-+ */
-+ sp->rx_skbprd = 0;
-+ sp->cur_rx = 0;
-+ sp->tx_prd = 0;
-+ sp->tx_csm = 0;
-+
-+ /*
-+ * Zero the stats before starting the interface
-+ */
-+ memset(&sp->stats, 0, sizeof(sp->stats));
-+
-+ /*
-+ * We load the ring here as there seem to be no way to tell the
-+ * firmware to wipe the ring without re-initializing it.
-+ */
-+ ar2313_load_rx_ring(dev, RX_RING_SIZE);
-+
-+ /*
-+ * Init hardware
-+ */
-+ ar2313_reset_reg(dev);
-+
-+ /*
-+ * Get the IRQ
-+ */
-+ ecode = request_irq(dev->irq, &ar2313_interrupt, IRQF_SHARED | IRQF_DISABLED | IRQF_SAMPLE_RANDOM, dev->name, dev);
-+ if (ecode) {
-+ printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n",
-+ dev->name, __FUNCTION__, dev->irq);
-+ goto init_error;
-+ }
-+
-+
-+ tasklet_enable(&sp->rx_tasklet);
-+
-+ return 0;
-+
-+ init_error:
-+ ar2313_init_cleanup(dev);
-+ return ecode;
-+}
-+
-+/*
-+ * Load the rx ring.
-+ *
-+ * Loading rings is safe without holding the spin lock since this is
-+ * done only before the device is enabled, thus no interrupts are
-+ * generated and by the interrupt handler/tasklet handler.
-+ */
-+static void ar2313_load_rx_ring(struct net_device *dev, int nr_bufs)
-+{
-+
-+ struct ar2313_private *sp = ((struct net_device *)dev)->priv;
-+ short i, idx;
-+
-+ idx = sp->rx_skbprd;
-+
-+ for (i = 0; i < nr_bufs; i++) {
-+ struct sk_buff *skb;
-+ ar2313_descr_t *rd;
-+
-+ if (sp->rx_skb[idx]) {
-+#if DEBUG_RX
-+ printk(KERN_INFO "ar2313 rx refill full\n");
-+#endif /* DEBUG */
-+ break;
-+ }
-+
-+ // partha: create additional room for the second GRE fragment
-+ skb = alloc_skb(AR2313_BUFSIZE+128, GFP_ATOMIC);
-+ if (!skb) {
-+ printk("\n\n\n\n %s: No memory in system\n\n\n\n", __FUNCTION__);
-+ break;
-+ }
-+ // partha: create additional room in the front for tx pkt capture
-+ skb_reserve(skb, 32);
-+
-+ /*
-+ * Make sure IP header starts on a fresh cache line.
-+ */
-+ skb->dev = dev;
-+ skb_reserve(skb, RX_OFFSET);
-+ sp->rx_skb[idx] = skb;
-+
-+ rd = (ar2313_descr_t *) &sp->rx_ring[idx];
-+
-+ /* initialize dma descriptor */
-+ rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
-+ DMA_RX1_CHAINED);
-+ rd->addr = virt_to_phys(skb->data);
-+ rd->descr = virt_to_phys(&sp->rx_ring[(idx+1) & (AR2313_DESCR_ENTRIES-1)]);
-+ rd->status = DMA_RX_OWN;
-+
-+ idx = DSC_NEXT(idx);
-+ }
-+
-+ if (!i) {
-+#if DEBUG_ERR
-+ printk(KERN_INFO "Out of memory when allocating standard receive buffers\n");
-+#endif /* DEBUG */
-+ } else {
-+ sp->rx_skbprd = idx;
-+ }
-+
-+ return;
-+}
-+
-+#define AR2313_MAX_PKTS_PER_CALL 64
-+
-+static int ar2313_rx_int(struct net_device *dev)
-+{
-+ struct ar2313_private *sp = dev->priv;
-+ struct sk_buff *skb, *skb_new;
-+ ar2313_descr_t *rxdesc;
-+ unsigned int status;
-+ u32 idx;
-+ int pkts = 0;
-+ int rval;
-+
-+ idx = sp->cur_rx;
-+
-+ /* process at most the entire ring and then wait for another interrupt */
-+ while(1) {
-+
-+ rxdesc = &sp->rx_ring[idx];
-+ status = rxdesc->status;
-+ if (status & DMA_RX_OWN) {
-+ /* SiByte owns descriptor or descr not yet filled in */
-+ rval = 0;
-+ break;
-+ }
-+
-+ if (++pkts > AR2313_MAX_PKTS_PER_CALL) {
-+ rval = 1;
-+ break;
-+ }
-+
-+#if DEBUG_RX
-+ printk("index %d\n", idx);
-+ printk("RX status %08x\n", rxdesc->status);
-+ printk("RX devcs %08x\n", rxdesc->devcs );
-+ printk("RX addr %08x\n", rxdesc->addr );
-+ printk("RX descr %08x\n", rxdesc->descr );
-+#endif
-+
-+ if ((status & (DMA_RX_ERROR|DMA_RX_ERR_LENGTH)) &&
-+ (!(status & DMA_RX_LONG))){
-+#if DEBUG_RX
-+ printk("%s: rx ERROR %08x\n", __FUNCTION__, status);
-+#endif
-+ sp->stats.rx_errors++;
-+ sp->stats.rx_dropped++;
-+
-+ /* add statistics counters */
-+ if (status & DMA_RX_ERR_CRC) sp->stats.rx_crc_errors++;
-+ if (status & DMA_RX_ERR_COL) sp->stats.rx_over_errors++;
-+ if (status & DMA_RX_ERR_LENGTH)
-+ sp->stats.rx_length_errors++;
-+ if (status & DMA_RX_ERR_RUNT) sp->stats.rx_over_errors++;
-+ if (status & DMA_RX_ERR_DESC) sp->stats.rx_over_errors++;
-+
-+ } else {
-+ /* alloc new buffer. */
-+ skb_new = dev_alloc_skb(AR2313_BUFSIZE + RX_OFFSET + 128);
-+ if (skb_new != NULL) {
-+
-+ skb = sp->rx_skb[idx];
-+ /* set skb */
-+ skb_put(skb, ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
-+
-+#ifdef CONFIG_MERLOT
-+ if ((dev->am_pkt_handler == NULL) ||
-+ (dev->am_pkt_handler(skb, dev) == 0)) {
-+#endif
-+ sp->stats.rx_bytes += skb->len;
-+ skb->protocol = eth_type_trans(skb, dev);
-+ /* pass the packet to upper layers */
-+
-+#ifdef CONFIG_MERLOT
-+ if (dev->asap_netif_rx)
-+ dev->asap_netif_rx(skb);
-+ else
-+#endif
-+ netif_rx(skb);
-+#ifdef CONFIG_MERLOT
-+ }
-+#endif
-+ skb_new->dev = dev;
-+ /* 16 bit align */
-+ skb_reserve(skb_new, RX_OFFSET+32);
-+ /* reset descriptor's curr_addr */
-+ rxdesc->addr = virt_to_phys(skb_new->data);
-+
-+ sp->stats.rx_packets++;
-+ sp->rx_skb[idx] = skb_new;
-+
-+ } else {
-+ sp->stats.rx_dropped++;
-+ }
-+ }
-+
-+ rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
-+ DMA_RX1_CHAINED);
-+ rxdesc->status = DMA_RX_OWN;
-+
-+ idx = DSC_NEXT(idx);
-+ }
-+
-+ sp->cur_rx = idx;
-+
-+ return rval;
-+}
-+
-+
-+static void ar2313_tx_int(struct net_device *dev)
-+{
-+ struct ar2313_private *sp = dev->priv;
-+ u32 idx;
-+ struct sk_buff *skb;
-+ ar2313_descr_t *txdesc;
-+ unsigned int status=0;
-+
-+ idx = sp->tx_csm;
-+
-+ while (idx != sp->tx_prd) {
-+
-+ txdesc = &sp->tx_ring[idx];
-+
-+#if DEBUG_TX
-+ printk("%s: TXINT: csm=%d idx=%d prd=%d status=%x devcs=%x addr=%08x descr=%x\n",
-+ dev->name, sp->tx_csm, idx, sp->tx_prd,
-+ txdesc->status, txdesc->devcs, txdesc->addr, txdesc->descr);
-+#endif /* DEBUG */
-+
-+ if ((status = txdesc->status) & DMA_TX_OWN) {
-+ /* ar2313 dma still owns descr */
-+ break;
-+ }
-+ /* done with this descriptor */
-+ dma_unmap_single(NULL, txdesc->addr, txdesc->devcs & DMA_TX1_BSIZE_MASK, DMA_TO_DEVICE);
-+ txdesc->status = 0;
-+
-+ if (status & DMA_TX_ERROR){
-+ sp->stats.tx_errors++;
-+ sp->stats.tx_dropped++;
-+ if(status & DMA_TX_ERR_UNDER)
-+ sp->stats.tx_fifo_errors++;
-+ if(status & DMA_TX_ERR_HB)
-+ sp->stats.tx_heartbeat_errors++;
-+ if(status & (DMA_TX_ERR_LOSS |
-+ DMA_TX_ERR_LINK))
-+ sp->stats.tx_carrier_errors++;
-+ if (status & (DMA_TX_ERR_LATE|
-+ DMA_TX_ERR_COL |
-+ DMA_TX_ERR_JABBER |
-+ DMA_TX_ERR_DEFER))
-+ sp->stats.tx_aborted_errors++;
-+ } else {
-+ /* transmit OK */
-+ sp->stats.tx_packets++;
-+ }
-+
-+ skb = sp->tx_skb[idx];
-+ sp->tx_skb[idx] = NULL;
-+ idx = DSC_NEXT(idx);
-+ sp->stats.tx_bytes += skb->len;
-+ dev_kfree_skb_irq(skb);
-+ }
-+
-+ sp->tx_csm = idx;
-+
-+ return;
-+}
-+
-+
-+static void
-+rx_tasklet_func(unsigned long data)
-+{
-+ struct net_device *dev = (struct net_device *) data;
-+ struct ar2313_private *sp = dev->priv;
-+
-+ if (sp->unloading) {
-+ return;
-+ }
-+
-+ if (ar2313_rx_int(dev)) {
-+ tasklet_hi_schedule(&sp->rx_tasklet);
-+ }
-+ else {
-+ unsigned long flags;
-+ spin_lock_irqsave(&sp->lock, flags);
-+ sp->dma_regs->intr_ena |= DMA_STATUS_RI;
-+ spin_unlock_irqrestore(&sp->lock, flags);
-+ }
-+}
-+
-+static void
-+rx_schedule(struct net_device *dev)
-+{
-+ struct ar2313_private *sp = dev->priv;
-+
-+ sp->dma_regs->intr_ena &= ~DMA_STATUS_RI;
-+
-+ tasklet_hi_schedule(&sp->rx_tasklet);
-+}
-+
-+static irqreturn_t ar2313_interrupt(int irq, void *dev_id)
-+{
-+ struct net_device *dev = (struct net_device *)dev_id;
-+ struct ar2313_private *sp = dev->priv;
-+ unsigned int status, enabled;
-+
-+ /* clear interrupt */
-+ /*
-+ * Don't clear RI bit if currently disabled.
-+ */
-+ status = sp->dma_regs->status;
-+ enabled = sp->dma_regs->intr_ena;
-+ sp->dma_regs->status = status & enabled;
-+
-+ if (status & DMA_STATUS_NIS) {
-+ /* normal status */
-+ /*
-+ * Don't schedule rx processing if interrupt
-+ * is already disabled.
-+ */
-+ if (status & enabled & DMA_STATUS_RI) {
-+ /* receive interrupt */
-+ rx_schedule(dev);
-+ }
-+ if (status & DMA_STATUS_TI) {
-+ /* transmit interrupt */
-+ ar2313_tx_int(dev);
-+ }
-+ }
-+
-+ if (status & DMA_STATUS_AIS) {
-+#if DEBUG_INT
-+ printk("%s: AIS set %08x & %x\n", __FUNCTION__,
-+ status, (DMA_STATUS_FBE | DMA_STATUS_TPS));
-+#endif
-+ /* abnormal status */
-+ if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) {
-+ ar2313_restart(dev);
-+ }
-+ }
-+ return IRQ_HANDLED;
-+}
-+
-+
-+static int ar2313_open(struct net_device *dev)
-+{
-+ struct ar2313_private *sp;
-+
-+ sp = dev->priv;
-+
-+ dev->mtu = 1500;
-+ netif_start_queue(dev);
-+
-+ sp->eth_regs->mac_control |= MAC_CONTROL_RE;
-+
-+ AR2313_MOD_INC_USE_COUNT;
-+
-+ return 0;
-+}
-+
-+static void ar2313_halt(struct net_device *dev)
-+{
-+ struct ar2313_private *sp = dev->priv;
-+ int j;
-+
-+ tasklet_disable(&sp->rx_tasklet);
-+
-+ /* kill the MAC */
-+ sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE | /* disable Receives */
-+ MAC_CONTROL_TE); /* disable Transmits */
-+ /* stop dma */
-+ sp->dma_regs->control = 0;
-+ sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR;
-+
-+ /* place phy and MAC in reset */
-+ *sp->int_regs |= (ar_int_mac_mask | ar_int_phy_mask);
-+
-+ /* free buffers on tx ring */
-+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+ struct sk_buff *skb;
-+ ar2313_descr_t *txdesc;
-+
-+ txdesc = &sp->tx_ring[j];
-+ txdesc->descr = 0;
-+
-+ skb = sp->tx_skb[j];
-+ if (skb) {
-+ dev_kfree_skb(skb);
-+ sp->tx_skb[j] = NULL;
-+ }
-+ }
-+}
-+
-+/*
-+ * close should do nothing. Here's why. It's called when
-+ * 'ifconfig bond0 down' is run. If it calls free_irq then
-+ * the irq is gone forever ! When bond0 is made 'up' again,
-+ * the ar2313_open () does not call request_irq (). Worse,
-+ * the call to ar2313_halt() generates a WDOG reset due to
-+ * the write to 'sp->int_regs' and the box reboots.
-+ * Commenting this out is good since it allows the
-+ * system to resume when bond0 is made up again.
-+ */
-+static int ar2313_close(struct net_device *dev)
-+{
-+#if 0
-+ /*
-+ * Disable interrupts
-+ */
-+ disable_irq(dev->irq);
-+
-+ /*
-+ * Without (or before) releasing irq and stopping hardware, this
-+ * is an absolute non-sense, by the way. It will be reset instantly
-+ * by the first irq.
-+ */
-+ netif_stop_queue(dev);
-+
-+ /* stop the MAC and DMA engines */
-+ ar2313_halt(dev);
-+
-+ /* release the interrupt */
-+ free_irq(dev->irq, dev);
-+
-+#endif
-+ AR2313_MOD_DEC_USE_COUNT;
-+ return 0;
-+}
-+
-+static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+ struct ar2313_private *sp = dev->priv;
-+ ar2313_descr_t *td;
-+ u32 idx;
-+
-+ idx = sp->tx_prd;
-+ td = &sp->tx_ring[idx];
-+
-+ if (td->status & DMA_TX_OWN) {
-+#if DEBUG_TX
-+ printk("%s: No space left to Tx\n", __FUNCTION__);
-+#endif
-+ /* free skbuf and lie to the caller that we sent it out */
-+ sp->stats.tx_dropped++;
-+ dev_kfree_skb(skb);
-+
-+ /* restart transmitter in case locked */
-+ sp->dma_regs->xmt_poll = 0;
-+ return 0;
-+ }
-+
-+ /* Setup the transmit descriptor. */
-+ td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) |
-+ (DMA_TX1_LS|DMA_TX1_IC|DMA_TX1_CHAINED));
-+ td->addr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
-+ td->status = DMA_TX_OWN;
-+
-+ /* kick transmitter last */
-+ sp->dma_regs->xmt_poll = 0;
-+
-+#if DEBUG_TX
-+ printk("index %d\n", idx);
-+ printk("TX status %08x\n", td->status);
-+ printk("TX devcs %08x\n", td->devcs );
-+ printk("TX addr %08x\n", td->addr );
-+ printk("TX descr %08x\n", td->descr );
-+#endif
-+
-+ sp->tx_skb[idx] = skb;
-+ idx = DSC_NEXT(idx);
-+ sp->tx_prd = idx;
-+
-+ //dev->trans_start = jiffies;
-+
-+ return 0;
-+}
-+
-+static int netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
-+{
-+ struct ar2313_private *np = dev->priv;
-+ u32 tmp;
-+
-+ ecmd->supported =
-+ (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
-+ SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
-+ SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII);
-+
-+ ecmd->port = PORT_TP;
-+ /* only supports internal transceiver */
-+ ecmd->transceiver = XCVR_INTERNAL;
-+ /* not sure what this is for */
-+ ecmd->phy_address = 1;
-+
-+ ecmd->advertising = ADVERTISED_MII;
-+ tmp = armiiread(np->phy, MII_ADVERTISE);
-+ if (tmp & ADVERTISE_10HALF)
-+ ecmd->advertising |= ADVERTISED_10baseT_Half;
-+ if (tmp & ADVERTISE_10FULL)
-+ ecmd->advertising |= ADVERTISED_10baseT_Full;
-+ if (tmp & ADVERTISE_100HALF)
-+ ecmd->advertising |= ADVERTISED_100baseT_Half;
-+ if (tmp & ADVERTISE_100FULL)
-+ ecmd->advertising |= ADVERTISED_100baseT_Full;
-+
-+ tmp = armiiread(np->phy, MII_BMCR);
-+ if (tmp & BMCR_ANENABLE) {
-+ ecmd->advertising |= ADVERTISED_Autoneg;
-+ ecmd->autoneg = AUTONEG_ENABLE;
-+ } else {
-+ ecmd->autoneg = AUTONEG_DISABLE;
-+ }
-+
-+ if (ecmd->autoneg == AUTONEG_ENABLE) {
-+ tmp = armiiread(np->phy, MII_LPA);
-+ if (tmp & (LPA_100FULL|LPA_10FULL)) {
-+ ecmd->duplex = DUPLEX_FULL;
-+ } else {
-+ ecmd->duplex = DUPLEX_HALF;
-+ }
-+ if (tmp & (LPA_100FULL|LPA_100HALF)) {
-+ ecmd->speed = SPEED_100;
-+ } else {
-+ ecmd->speed = SPEED_10;
-+ }
-+ } else {
-+ if (tmp & BMCR_FULLDPLX) {
-+ ecmd->duplex = DUPLEX_FULL;
-+ } else {
-+ ecmd->duplex = DUPLEX_HALF;
-+ }
-+ if (tmp & BMCR_SPEED100) {
-+ ecmd->speed = SPEED_100;
-+ } else {
-+ ecmd->speed = SPEED_10;
-+ }
-+ }
-+
-+ /* ignore maxtxpkt, maxrxpkt for now */
-+
-+ return 0;
-+}
-+
-+static int netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
-+{
-+ struct ar2313_private *np = dev->priv;
-+ u32 tmp;
-+
-+ if (ecmd->speed != SPEED_10 && ecmd->speed != SPEED_100)
-+ return -EINVAL;
-+ if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
-+ return -EINVAL;
-+ if (ecmd->port != PORT_TP)
-+ return -EINVAL;
-+ if (ecmd->transceiver != XCVR_INTERNAL)
-+ return -EINVAL;
-+ if (ecmd->autoneg != AUTONEG_DISABLE && ecmd->autoneg != AUTONEG_ENABLE)
-+ return -EINVAL;
-+ /* ignore phy_address, maxtxpkt, maxrxpkt for now */
-+
-+ /* WHEW! now lets bang some bits */
-+
-+ tmp = armiiread(np->phy, MII_BMCR);
-+ if (ecmd->autoneg == AUTONEG_ENABLE) {
-+ /* turn on autonegotiation */
-+ tmp |= BMCR_ANENABLE;
-+ printk("%s: Enabling auto-neg\n", dev->name);
-+ } else {
-+ /* turn off auto negotiation, set speed and duplexity */
-+ tmp &= ~(BMCR_ANENABLE | BMCR_SPEED100 | BMCR_FULLDPLX);
-+ if (ecmd->speed == SPEED_100)
-+ tmp |= BMCR_SPEED100;
-+ if (ecmd->duplex == DUPLEX_FULL)
-+ tmp |= BMCR_FULLDPLX;
-+ printk("%s: Hard coding %d/%s\n", dev->name,
-+ (ecmd->speed == SPEED_100)? 100:10,
-+ (ecmd->duplex == DUPLEX_FULL)? "full":"half");
-+ }
-+ armiiwrite(np->phy, MII_BMCR, tmp);
-+ np->phyData = 0;
-+ return 0;
-+}
-+
-+static int netdev_ethtool_ioctl(struct net_device *dev, void *useraddr)
-+{
-+ struct ar2313_private *np = dev->priv;
-+ u32 cmd;
-+
-+ if (get_user(cmd, (u32 *)useraddr))
-+ return -EFAULT;
-+
-+ switch (cmd) {
-+ /* get settings */
-+ case ETHTOOL_GSET: {
-+ struct ethtool_cmd ecmd = { ETHTOOL_GSET };
-+ spin_lock_irq(&np->lock);
-+ netdev_get_ecmd(dev, &ecmd);
-+ spin_unlock_irq(&np->lock);
-+ if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
-+ return -EFAULT;
-+ return 0;
-+ }
-+ /* set settings */
-+ case ETHTOOL_SSET: {
-+ struct ethtool_cmd ecmd;
-+ int r;
-+ if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
-+ return -EFAULT;
-+ spin_lock_irq(&np->lock);
-+ r = netdev_set_ecmd(dev, &ecmd);
-+ spin_unlock_irq(&np->lock);
-+ return r;
-+ }
-+ /* restart autonegotiation */
-+ case ETHTOOL_NWAY_RST: {
-+ int tmp;
-+ int r = -EINVAL;
-+ /* if autoneg is off, it's an error */
-+ tmp = armiiread(np->phy, MII_BMCR);
-+ if (tmp & BMCR_ANENABLE) {
-+ tmp |= (BMCR_ANRESTART);
-+ armiiwrite(np->phy, MII_BMCR, tmp);
-+ r = 0;
-+ }
-+ return r;
-+ }
-+ /* get link status */
-+ case ETHTOOL_GLINK: {
-+ struct ethtool_value edata = {ETHTOOL_GLINK};
-+ edata.data = (armiiread(np->phy, MII_BMSR)&BMSR_LSTATUS) ? 1:0;
-+ if (copy_to_user(useraddr, &edata, sizeof(edata)))
-+ return -EFAULT;
-+ return 0;
-+ }
-+ }
-+
-+ return -EOPNOTSUPP;
-+}
-+
-+static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-+{
-+ struct mii_ioctl_data *data = (struct mii_ioctl_data *)&ifr->ifr_data;
-+
-+ switch (cmd) {
-+ case SIOCDEVPRIVATE: {
-+ struct ar2313_cmd scmd;
-+
-+ if (copy_from_user(&scmd, ifr->ifr_data, sizeof(scmd)))
-+ return -EFAULT;
-+
-+#if DEBUG
-+ printk("%s: ioctl devprivate c=%d a=%x l=%d m=%d d=%x,%x\n",
-+ dev->name, scmd.cmd,
-+ scmd.address, scmd.length,
-+ scmd.mailbox, scmd.data[0], scmd.data[1]);
-+#endif /* DEBUG */
-+
-+ switch (scmd.cmd) {
-+ case AR2313_READ_DATA:
-+ if(scmd.length==4){
-+ scmd.data[0] = *((u32*)scmd.address);
-+ } else if(scmd.length==2) {
-+ scmd.data[0] = *((u16*)scmd.address);
-+ } else if (scmd.length==1) {
-+ scmd.data[0] = *((u8*)scmd.address);
-+ } else {
-+ return -EOPNOTSUPP;
-+ }
-+ if(copy_to_user(ifr->ifr_data, &scmd, sizeof(scmd)))
-+ return -EFAULT;
-+ break;
-+
-+ case AR2313_WRITE_DATA:
-+ if(scmd.length==4){
-+ *((u32*)scmd.address) = scmd.data[0];
-+ } else if(scmd.length==2) {
-+ *((u16*)scmd.address) = scmd.data[0];
-+ } else if (scmd.length==1) {
-+ *((u8*)scmd.address) = scmd.data[0];
-+ } else {
-+ return -EOPNOTSUPP;
-+ }
-+ break;
-+
-+ case AR2313_GET_VERSION:
-+ // SAMEER: sprintf((char*) &scmd, "%s", ARUBA_VERSION);
-+ if(copy_to_user(ifr->ifr_data, &scmd, sizeof(scmd)))
-+ return -EFAULT;
-+ break;
-+
-+ default:
-+ return -EOPNOTSUPP;
-+ }
-+ return 0;
-+ }
-+
-+ case SIOCETHTOOL:
-+ return netdev_ethtool_ioctl(dev, (void *) ifr->ifr_data);
-+
-+ case SIOCGMIIPHY: /* Get address of MII PHY in use. */
-+ data->phy_id = 1;
-+ /* Fall Through */
-+
-+ case SIOCGMIIREG: /* Read MII PHY register. */
-+ case SIOCDEVPRIVATE+1: /* for binary compat, remove in 2.5 */
-+ data->val_out = armiiread(data->phy_id & 0x1f,
-+ data->reg_num & 0x1f);
-+ return 0;
-+ case SIOCSMIIREG: /* Write MII PHY register. */
-+ case SIOCDEVPRIVATE+2: /* for binary compat, remove in 2.5 */
-+ if (!capable(CAP_NET_ADMIN))
-+ return -EPERM;
-+ armiiwrite(data->phy_id & 0x1f,
-+ data->reg_num & 0x1f, data->val_in);
-+ return 0;
-+
-+ case SIOCSIFHWADDR:
-+ if (copy_from_user(dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
-+ return -EFAULT;
-+ return 0;
-+
-+ case SIOCGIFHWADDR:
-+ if (copy_to_user(ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
-+ return -EFAULT;
-+ return 0;
-+
-+ default:
-+ break;
-+ }
-+
-+ return -EOPNOTSUPP;
-+}
-+
-+static struct net_device_stats *ar2313_get_stats(struct net_device *dev)
-+{
-+ struct ar2313_private *sp = dev->priv;
-+ return &sp->stats;
-+}
-+
-+static short
-+armiiread(short phy, short reg)
-+{
-+ volatile ETHERNET_STRUCT * ethernet;
-+
-+ ethernet = (volatile ETHERNET_STRUCT *)KSEG1ADDR(ar_eth_base); /* always MAC 0 */
-+ ethernet->mii_addr = ((reg << MII_ADDR_REG_SHIFT) |
-+ (phy << MII_ADDR_PHY_SHIFT));
-+ while (ethernet->mii_addr & MII_ADDR_BUSY);
-+ return (ethernet->mii_data >> MII_DATA_SHIFT);
-+}
-+
-+static void
-+armiiwrite(short phy, short reg, short data)
-+{
-+ volatile ETHERNET_STRUCT * ethernet;
-+
-+ ethernet = (volatile ETHERNET_STRUCT *)KSEG1ADDR(ar_eth_base); /* always MAC 0 */
-+ while (ethernet->mii_addr & MII_ADDR_BUSY);
-+ ethernet->mii_data = data << MII_DATA_SHIFT;
-+ ethernet->mii_addr = ((reg << MII_ADDR_REG_SHIFT) |
-+ (phy << MII_ADDR_PHY_SHIFT) |
-+ MII_ADDR_WRITE);
-+}
-+
-diff -urN linux.old/drivers/net/ar2313/ar2313.h linux.eth/drivers/net/ar2313/ar2313.h
---- linux.old/drivers/net/ar2313/ar2313.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.eth/drivers/net/ar2313/ar2313.h 2006-12-16 04:30:11.000000000 +0100
-@@ -0,0 +1,191 @@
-+#ifndef _AR2313_H_
-+#define _AR2313_H_
-+
-+#include <linux/autoconf.h>
-+#include <asm/bootinfo.h>
-+#include "platform.h"
-+
-+extern unsigned long mips_machtype;
-+
-+#undef ETHERNET_BASE
-+#define ETHERNET_BASE ar_eth_base
-+#define ETHERNET_SIZE 0x00100000
-+#define ETHERNET_MACS 2
-+
-+#undef DMA_BASE
-+#define DMA_BASE ar_dma_base
-+#define DMA_SIZE 0x00100000
-+
-+
-+/*
-+ * probe link timer - 5 secs
-+ */
-+#define LINK_TIMER (5*HZ)
-+
-+/*
-+ * Interrupt register base address
-+ */
-+#define INTERRUPT_BASE PHYS_TO_K1(ar_int_base)
-+
-+/*
-+ * Reset Register
-+ */
-+#define AR531X_RESET (AR531X_RESETTMR + 0x0020)
-+#define RESET_SYSTEM 0x00000001 /* cold reset full system */
-+#define RESET_PROC 0x00000002 /* cold reset MIPS core */
-+#define RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */
-+#define RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
-+#define RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
-+#define RESET_ENET0 0x00000020 /* cold reset ENET0 mac */
-+#define RESET_ENET1 0x00000040 /* cold reset ENET1 mac */
-+
-+#define IS_DMA_TX_INT(X) (((X) & (DMA_STATUS_TI)) != 0)
-+#define IS_DMA_RX_INT(X) (((X) & (DMA_STATUS_RI)) != 0)
-+#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN)) == 0)
-+
-+#ifndef K1_TO_PHYS
-+// hack
-+#define K1_TO_PHYS(x) (((unsigned int)(x)) & 0x1FFFFFFF) /* kseg1 to physical */
-+#endif
-+
-+#ifndef PHYS_TO_K1
-+// hack
-+#define PHYS_TO_K1(x) (((unsigned int)(x)) | 0xA0000000) /* physical to kseg1 */
-+#endif
-+
-+#define AR2313_TX_TIMEOUT (HZ/4)
-+
-+/*
-+ * Rings
-+ */
-+#define DSC_RING_ENTRIES_SIZE (AR2313_DESCR_ENTRIES * sizeof(struct desc))
-+#define DSC_NEXT(idx) ((idx + 1) & (AR2313_DESCR_ENTRIES - 1))
-+
-+static inline int tx_space (u32 csm, u32 prd)
-+{
-+ return (csm - prd - 1) & (AR2313_DESCR_ENTRIES - 1);
-+}
-+
-+#if MAX_SKB_FRAGS
-+#define TX_RESERVED (MAX_SKB_FRAGS+1) /* +1 for message header */
-+#define tx_ring_full(csm, prd) (tx_space(csm, prd) <= TX_RESERVED)
-+#else
-+#define tx_ring_full 0
-+#endif
-+
-+#define AR2313_MBGET 2
-+#define AR2313_MBSET 3
-+#define AR2313_PCI_RECONFIG 4
-+#define AR2313_PCI_DUMP 5
-+#define AR2313_TEST_PANIC 6
-+#define AR2313_TEST_NULLPTR 7
-+#define AR2313_READ_DATA 8
-+#define AR2313_WRITE_DATA 9
-+#define AR2313_GET_VERSION 10
-+#define AR2313_TEST_HANG 11
-+#define AR2313_SYNC 12
-+
-+
-+struct ar2313_cmd {
-+ u32 cmd;
-+ u32 address; /* virtual address of image */
-+ u32 length; /* size of image to download */
-+ u32 mailbox; /* mailbox to get/set */
-+ u32 data[2]; /* contents of mailbox to read/write */
-+};
-+
-+
-+/*
-+ * Struct private for the Sibyte.
-+ *
-+ * Elements are grouped so variables used by the tx handling goes
-+ * together, and will go into the same cache lines etc. in order to
-+ * avoid cache line contention between the rx and tx handling on SMP.
-+ *
-+ * Frequently accessed variables are put at the beginning of the
-+ * struct to help the compiler generate better/shorter code.
-+ */
-+struct ar2313_private
-+{
-+ struct net_device *dev;
-+ int version;
-+ u32 mb[2];
-+
-+ volatile ETHERNET_STRUCT *eth_regs;
-+ volatile DMA *dma_regs;
-+ volatile u32 *int_regs;
-+
-+ spinlock_t lock; /* Serialise access to device */
-+
-+ /*
-+ * RX and TX descriptors, must be adjacent
-+ */
-+ ar2313_descr_t *rx_ring;
-+ ar2313_descr_t *tx_ring;
-+
-+
-+ struct sk_buff **rx_skb;
-+ struct sk_buff **tx_skb;
-+
-+ /*
-+ * RX elements
-+ */
-+ u32 rx_skbprd;
-+ u32 cur_rx;
-+
-+ /*
-+ * TX elements
-+ */
-+ u32 tx_prd;
-+ u32 tx_csm;
-+
-+ /*
-+ * Misc elements
-+ */
-+ int board_idx;
-+ char name[48];
-+ struct net_device_stats stats;
-+ struct {
-+ u32 address;
-+ u32 length;
-+ char *mapping;
-+ } desc;
-+
-+
-+ struct timer_list link_timer;
-+ unsigned short phy; /* merlot phy = 1, samsung phy = 0x1f */
-+ unsigned short mac;
-+ unsigned short link; /* 0 - link down, 1 - link up */
-+ u16 phyData;
-+
-+ struct tasklet_struct rx_tasklet;
-+ int unloading;
-+};
-+
-+
-+/*
-+ * Prototypes
-+ */
-+static int ar2313_init(struct net_device *dev);
-+#ifdef TX_TIMEOUT
-+static void ar2313_tx_timeout(struct net_device *dev);
-+#endif
-+#if 0
-+static void ar2313_multicast_list(struct net_device *dev);
-+#endif
-+static int ar2313_restart(struct net_device *dev);
-+#if DEBUG
-+static void ar2313_dump_regs(struct net_device *dev);
-+#endif
-+static void ar2313_load_rx_ring(struct net_device *dev, int bufs);
-+static irqreturn_t ar2313_interrupt(int irq, void *dev_id);
-+static int ar2313_open(struct net_device *dev);
-+static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev);
-+static int ar2313_close(struct net_device *dev);
-+static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
-+static void ar2313_init_cleanup(struct net_device *dev);
-+static int ar2313_setup_timer(struct net_device *dev);
-+static void ar2313_link_timer_fn(unsigned long data);
-+static void ar2313_check_link(struct net_device *dev);
-+static struct net_device_stats *ar2313_get_stats(struct net_device *dev);
-+#endif /* _AR2313_H_ */
-diff -urN linux.old/drivers/net/ar2313/ar2313_msg.h linux.eth/drivers/net/ar2313/ar2313_msg.h
---- linux.old/drivers/net/ar2313/ar2313_msg.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.eth/drivers/net/ar2313/ar2313_msg.h 2006-12-16 04:30:11.000000000 +0100
-@@ -0,0 +1,17 @@
-+#ifndef _AR2313_MSG_H_
-+#define _AR2313_MSG_H_
-+
-+#define AR2313_MTU 1692
-+#define AR2313_PRIOS 1
-+#define AR2313_QUEUES (2*AR2313_PRIOS)
-+
-+#define AR2313_DESCR_ENTRIES 64
-+
-+typedef struct {
-+ volatile unsigned int status; // OWN, Device control and status.
-+ volatile unsigned int devcs; // pkt Control bits + Length
-+ volatile unsigned int addr; // Current Address.
-+ volatile unsigned int descr; // Next descriptor in chain.
-+} ar2313_descr_t;
-+
-+#endif /* _AR2313_MSG_H_ */
-diff -urN linux.old/drivers/net/ar2313/dma.h linux.eth/drivers/net/ar2313/dma.h
---- linux.old/drivers/net/ar2313/dma.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.eth/drivers/net/ar2313/dma.h 2006-12-16 04:30:11.000000000 +0100
-@@ -0,0 +1,135 @@
-+#ifndef __ARUBA_DMA_H__
-+#define __ARUBA_DMA_H__
-+
-+/*******************************************************************************
-+ *
-+ * Copyright 2002 Integrated Device Technology, Inc.
-+ * All rights reserved.
-+ *
-+ * DMA register definition.
-+ *
-+ * File : $Id: dma.h,v 1.3 2002/06/06 18:34:03 astichte Exp $
-+ *
-+ * Author : ryan.holmQVist@idt.com
-+ * Date : 20011005
-+ * Update :
-+ * $Log: dma.h,v $
-+ * Revision 1.3 2002/06/06 18:34:03 astichte
-+ * Added XXX_PhysicalAddress and XXX_VirtualAddress
-+ *
-+ * Revision 1.2 2002/06/05 18:30:46 astichte
-+ * Removed IDTField
-+ *
-+ * Revision 1.1 2002/05/29 17:33:21 sysarch
-+ * jba File moved from vcode/include/idt/acacia
-+ *
-+ *
-+ ******************************************************************************/
-+
-+#define AR_BIT(x) (1 << (x))
-+#define DMA_RX_ERR_CRC AR_BIT(1)
-+#define DMA_RX_ERR_DRIB AR_BIT(2)
-+#define DMA_RX_ERR_MII AR_BIT(3)
-+#define DMA_RX_EV2 AR_BIT(5)
-+#define DMA_RX_ERR_COL AR_BIT(6)
-+#define DMA_RX_LONG AR_BIT(7)
-+#define DMA_RX_LS AR_BIT(8) /* last descriptor */
-+#define DMA_RX_FS AR_BIT(9) /* first descriptor */
-+#define DMA_RX_MF AR_BIT(10) /* multicast frame */
-+#define DMA_RX_ERR_RUNT AR_BIT(11) /* runt frame */
-+#define DMA_RX_ERR_LENGTH AR_BIT(12) /* length error */
-+#define DMA_RX_ERR_DESC AR_BIT(14) /* descriptor error */
-+#define DMA_RX_ERROR AR_BIT(15) /* error summary */
-+#define DMA_RX_LEN_MASK 0x3fff0000
-+#define DMA_RX_LEN_SHIFT 16
-+#define DMA_RX_FILT AR_BIT(30)
-+#define DMA_RX_OWN AR_BIT(31) /* desc owned by DMA controller */
-+
-+#define DMA_RX1_BSIZE_MASK 0x000007ff
-+#define DMA_RX1_BSIZE_SHIFT 0
-+#define DMA_RX1_CHAINED AR_BIT(24)
-+#define DMA_RX1_RER AR_BIT(25)
-+
-+#define DMA_TX_ERR_UNDER AR_BIT(1) /* underflow error */
-+#define DMA_TX_ERR_DEFER AR_BIT(2) /* excessive deferral */
-+#define DMA_TX_COL_MASK 0x78
-+#define DMA_TX_COL_SHIFT 3
-+#define DMA_TX_ERR_HB AR_BIT(7) /* hearbeat failure */
-+#define DMA_TX_ERR_COL AR_BIT(8) /* excessive collisions */
-+#define DMA_TX_ERR_LATE AR_BIT(9) /* late collision */
-+#define DMA_TX_ERR_LINK AR_BIT(10) /* no carrier */
-+#define DMA_TX_ERR_LOSS AR_BIT(11) /* loss of carrier */
-+#define DMA_TX_ERR_JABBER AR_BIT(14) /* transmit jabber timeout */
-+#define DMA_TX_ERROR AR_BIT(15) /* frame aborted */
-+#define DMA_TX_OWN AR_BIT(31) /* descr owned by DMA controller */
-+
-+#define DMA_TX1_BSIZE_MASK 0x000007ff
-+#define DMA_TX1_BSIZE_SHIFT 0
-+#define DMA_TX1_CHAINED AR_BIT(24) /* chained descriptors */
-+#define DMA_TX1_TER AR_BIT(25) /* transmit end of ring */
-+#define DMA_TX1_FS AR_BIT(29) /* first segment */
-+#define DMA_TX1_LS AR_BIT(30) /* last segment */
-+#define DMA_TX1_IC AR_BIT(31) /* interrupt on completion */
-+
-+#define RCVPKT_LENGTH(X) (X >> 16) /* Received pkt Length */
-+
-+#define MAC_CONTROL_RE AR_BIT(2) /* receive enable */
-+#define MAC_CONTROL_TE AR_BIT(3) /* transmit enable */
-+#define MAC_CONTROL_DC AR_BIT(5) /* Deferral check*/
-+#define MAC_CONTROL_ASTP AR_BIT(8) /* Auto pad strip */
-+#define MAC_CONTROL_DRTY AR_BIT(10) /* Disable retry */
-+#define MAC_CONTROL_DBF AR_BIT(11) /* Disable bcast frames */
-+#define MAC_CONTROL_LCC AR_BIT(12) /* late collision ctrl */
-+#define MAC_CONTROL_HP AR_BIT(13) /* Hash Perfect filtering */
-+#define MAC_CONTROL_HASH AR_BIT(14) /* Unicast hash filtering */
-+#define MAC_CONTROL_HO AR_BIT(15) /* Hash only filtering */
-+#define MAC_CONTROL_PB AR_BIT(16) /* Pass Bad frames */
-+#define MAC_CONTROL_IF AR_BIT(17) /* Inverse filtering */
-+#define MAC_CONTROL_PR AR_BIT(18) /* promiscuous mode (valid frames only) */
-+#define MAC_CONTROL_PM AR_BIT(19) /* pass multicast */
-+#define MAC_CONTROL_F AR_BIT(20) /* full-duplex */
-+#define MAC_CONTROL_DRO AR_BIT(23) /* Disable Receive Own */
-+#define MAC_CONTROL_HBD AR_BIT(28) /* heart-beat disabled (MUST BE SET) */
-+#define MAC_CONTROL_BLE AR_BIT(30) /* big endian mode */
-+#define MAC_CONTROL_RA AR_BIT(31) /* receive all (valid and invalid frames) */
-+
-+#define MII_ADDR_BUSY AR_BIT(0)
-+#define MII_ADDR_WRITE AR_BIT(1)
-+#define MII_ADDR_REG_SHIFT 6
-+#define MII_ADDR_PHY_SHIFT 11
-+#define MII_DATA_SHIFT 0
-+
-+#define FLOW_CONTROL_FCE AR_BIT(1)
-+
-+#define DMA_BUS_MODE_SWR AR_BIT(0) /* software reset */
-+#define DMA_BUS_MODE_BLE AR_BIT(7) /* big endian mode */
-+#define DMA_BUS_MODE_PBL_SHIFT 8 /* programmable burst length 32 */
-+#define DMA_BUS_MODE_DBO AR_BIT(20) /* big-endian descriptors */
-+
-+#define DMA_STATUS_TI AR_BIT(0) /* transmit interrupt */
-+#define DMA_STATUS_TPS AR_BIT(1) /* transmit process stopped */
-+#define DMA_STATUS_TU AR_BIT(2) /* transmit buffer unavailable */
-+#define DMA_STATUS_TJT AR_BIT(3) /* transmit buffer timeout */
-+#define DMA_STATUS_UNF AR_BIT(5) /* transmit underflow */
-+#define DMA_STATUS_RI AR_BIT(6) /* receive interrupt */
-+#define DMA_STATUS_RU AR_BIT(7) /* receive buffer unavailable */
-+#define DMA_STATUS_RPS AR_BIT(8) /* receive process stopped */
-+#define DMA_STATUS_ETI AR_BIT(10) /* early transmit interrupt */
-+#define DMA_STATUS_FBE AR_BIT(13) /* fatal bus interrupt */
-+#define DMA_STATUS_ERI AR_BIT(14) /* early receive interrupt */
-+#define DMA_STATUS_AIS AR_BIT(15) /* abnormal interrupt summary */
-+#define DMA_STATUS_NIS AR_BIT(16) /* normal interrupt summary */
-+#define DMA_STATUS_RS_SHIFT 17 /* receive process state */
-+#define DMA_STATUS_TS_SHIFT 20 /* transmit process state */
-+#define DMA_STATUS_EB_SHIFT 23 /* error bits */
-+
-+#define DMA_CONTROL_SR AR_BIT(1) /* start receive */
-+#define DMA_CONTROL_ST AR_BIT(13) /* start transmit */
-+#define DMA_CONTROL_SF AR_BIT(21) /* store and forward */
-+
-+#endif // __ARUBA_DMA_H__
-+
-+
-+
-+
-+
-diff -urN linux.old/drivers/net/ar2313/Makefile linux.eth/drivers/net/ar2313/Makefile
---- linux.old/drivers/net/ar2313/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux.eth/drivers/net/ar2313/Makefile 2006-12-16 04:30:11.000000000 +0100
-@@ -0,0 +1,5 @@
-+#
-+# Makefile for the AR2313 ethernet driver
-+#
-+
-+obj-$(CONFIG_AR2313) += ar2313.o
-diff -urN linux.old/drivers/net/ar2313/platform.h linux.eth/drivers/net/ar2313/platform.h
---- linux.old/drivers/net/ar2313/platform.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.eth/drivers/net/ar2313/platform.h 2006-12-16 04:30:11.000000000 +0100
-@@ -0,0 +1,128 @@
-+/********************************************************************************
-+ Title: $Source: platform.h,v $
-+
-+ Author: Dan Steinberg
-+ Copyright Integrated Device Technology 2001
-+
-+ Purpose: AR2313 Register/Bit Definitions
-+
-+ Update:
-+ $Log: platform.h,v $
-+
-+ Notes: See Merlot architecture spec for complete details. Note, all
-+ addresses are virtual addresses in kseg1 (Uncached, Unmapped).
-+
-+********************************************************************************/
-+
-+#ifndef PLATFORM_H
-+#define PLATFORM_H
-+
-+#define BIT(x) (1 << (x))
-+
-+#define RESET_BASE 0xBC003020
-+#define RESET_VALUE 0x00000001
-+
-+/********************************************************************
-+ * Device controller
-+ ********************************************************************/
-+typedef struct {
-+ volatile unsigned int flash0;
-+} DEVICE;
-+
-+#define device (*((volatile DEVICE *) DEV_CTL_BASE))
-+
-+// DDRC register
-+#define DEV_WP (1<<26)
-+
-+/********************************************************************
-+ * DDR controller
-+ ********************************************************************/
-+typedef struct {
-+ volatile unsigned int ddrc0;
-+ volatile unsigned int ddrc1;
-+ volatile unsigned int ddrrefresh;
-+} DDR;
-+
-+#define ddr (*((volatile DDR *) DDR_BASE))
-+
-+// DDRC register
-+#define DDRC_CS(i) ((i&0x3)<<0)
-+#define DDRC_WE (1<<2)
-+
-+/********************************************************************
-+ * Ethernet interfaces
-+ ********************************************************************/
-+#define ETHERNET_BASE 0xB8200000
-+
-+//
-+// New Combo structure for Both Eth0 AND eth1
-+//
-+typedef struct {
-+ volatile unsigned int mac_control; /* 0x00 */
-+ volatile unsigned int mac_addr[2]; /* 0x04 - 0x08*/
-+ volatile unsigned int mcast_table[2]; /* 0x0c - 0x10 */
-+ volatile unsigned int mii_addr; /* 0x14 */
-+ volatile unsigned int mii_data; /* 0x18 */
-+ volatile unsigned int flow_control; /* 0x1c */
-+ volatile unsigned int vlan_tag; /* 0x20 */
-+ volatile unsigned int pad[7]; /* 0x24 - 0x3c */
-+ volatile unsigned int ucast_table[8]; /* 0x40-0x5c */
-+
-+} ETHERNET_STRUCT;
-+
-+/********************************************************************
-+ * Interrupt controller
-+ ********************************************************************/
-+
-+typedef struct {
-+ volatile unsigned int wdog_control; /* 0x08 */
-+ volatile unsigned int wdog_timer; /* 0x0c */
-+ volatile unsigned int misc_status; /* 0x10 */
-+ volatile unsigned int misc_mask; /* 0x14 */
-+ volatile unsigned int global_status; /* 0x18 */
-+ volatile unsigned int reserved; /* 0x1c */
-+ volatile unsigned int reset_control; /* 0x20 */
-+} INTERRUPT;
-+
-+#define interrupt (*((volatile INTERRUPT *) INTERRUPT_BASE))
-+
-+#define INTERRUPT_MISC_TIMER BIT(0)
-+#define INTERRUPT_MISC_AHBPROC BIT(1)
-+#define INTERRUPT_MISC_AHBDMA BIT(2)
-+#define INTERRUPT_MISC_GPIO BIT(3)
-+#define INTERRUPT_MISC_UART BIT(4)
-+#define INTERRUPT_MISC_UARTDMA BIT(5)
-+#define INTERRUPT_MISC_WATCHDOG BIT(6)
-+#define INTERRUPT_MISC_LOCAL BIT(7)
-+
-+#define INTERRUPT_GLOBAL_ETH BIT(2)
-+#define INTERRUPT_GLOBAL_WLAN BIT(3)
-+#define INTERRUPT_GLOBAL_MISC BIT(4)
-+#define INTERRUPT_GLOBAL_ITIMER BIT(5)
-+
-+/********************************************************************
-+ * DMA controller
-+ ********************************************************************/
-+#define DMA_BASE 0xB8201000
-+
-+typedef struct {
-+ volatile unsigned int bus_mode; /* 0x00 (CSR0) */
-+ volatile unsigned int xmt_poll; /* 0x04 (CSR1) */
-+ volatile unsigned int rcv_poll; /* 0x08 (CSR2) */
-+ volatile unsigned int rcv_base; /* 0x0c (CSR3) */
-+ volatile unsigned int xmt_base; /* 0x10 (CSR4) */
-+ volatile unsigned int status; /* 0x14 (CSR5) */
-+ volatile unsigned int control; /* 0x18 (CSR6) */
-+ volatile unsigned int intr_ena; /* 0x1c (CSR7) */
-+ volatile unsigned int rcv_missed; /* 0x20 (CSR8) */
-+ volatile unsigned int reserved[11]; /* 0x24-0x4c (CSR9-19) */
-+ volatile unsigned int cur_tx_buf_addr; /* 0x50 (CSR20) */
-+ volatile unsigned int cur_rx_buf_addr; /* 0x50 (CSR21) */
-+} DMA;
-+
-+#define dma (*((volatile DMA *) DMA_BASE))
-+
-+// macro to convert from virtual to physical address
-+#define phys_addr(x) (x & 0x1fffffff)
-+
-+#endif /* PLATFORM_H */
diff -urN linux.old/drivers/net/Kconfig linux.eth/drivers/net/Kconfig
--- linux.old/drivers/net/Kconfig 2006-12-14 23:53:29.000000000 +0100
+++ linux.eth/drivers/net/Kconfig 2006-12-16 04:30:11.000000000 +0100
@@ -2052,7 +7,7 @@ diff -urN linux.old/drivers/net/Kconfig linux.eth/drivers/net/Kconfig
+config AR2313
+ tristate "AR2313 Ethernet support"
-+ depends on NET_ETHERNET && AR531X
++ depends on NET_ETHERNET && ATHEROS
+ help
+ Support for the AR231x/531x ethernet controller
+