diff options
Diffstat (limited to 'target/linux/ipq806x/base-files')
6 files changed, 129 insertions, 1 deletions
diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds b/target/linux/ipq806x/base-files/etc/board.d/01_leds index b32c1cc21d..392dc8b5e7 100755 --- a/target/linux/ipq806x/base-files/etc/board.d/01_leds +++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds @@ -11,6 +11,13 @@ board_config_update board=$(ipq806x_board_name) case "$board" in +c2600) + ucidef_set_led_usbdev "usb1" "USB 1" "usb_2:blue" "2-1" + ucidef_set_led_usbdev "usb2" "USB 2" "usb_4:blue" "4-1" + ucidef_set_led_netdev "wan" "WAN" "wan:blue" "eth0" + ucidef_set_led_netdev "lan" "LAN" "lan:blue" "br-lan" + ucidef_set_led_default "general" "general" "ledgnr:blue" "1" + ;; d7800 |\ r7500) ucidef_set_led_usbdev "usb1" "USB 1" "r7500:white:usb1" "1-1" diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network index 6e18297e99..e3c9137a5a 100755 --- a/target/linux/ipq806x/base-files/etc/board.d/02_network +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network @@ -13,6 +13,7 @@ board=$(ipq806x_board_name) case "$board" in ap148 |\ +c2600 |\ d7800 |\ r7500) ucidef_add_switch "switch0" \ diff --git a/target/linux/ipq806x/base-files/etc/diag.sh b/target/linux/ipq806x/base-files/etc/diag.sh new file mode 100755 index 0000000000..b19012c4e5 --- /dev/null +++ b/target/linux/ipq806x/base-files/etc/diag.sh @@ -0,0 +1,31 @@ +#!/bin/sh + +. /lib/functions/leds.sh +. /lib/ipq806x.sh + +get_status_led() { + case $(ipq806x_board_name) in + c2600) + status_led="status:blue" + ;; + esac +} + +set_state() { + get_status_led + + case "$1" in + preinit) + status_led_blink_preinit + ;; + failsafe) + status_led_blink_failsafe + ;; + preinit_regular) + status_led_blink_preinit_regular + ;; + done) + status_led_on + ;; + esac +} diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata new file mode 100644 index 0000000000..5f604e1a26 --- /dev/null +++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -0,0 +1,68 @@ +#!/bin/sh + +ath10kcal_die() { + echo "ath10cal: " "$*" + exit 1 +} + +ath10kcal_from_file() { + local source=$1 + local offset=$2 + local count=$3 + + dd if=$source of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \ + ath10kcal_die "failed to extract calibration data from $source" +} + +ath10kcal_extract() { + local part=$1 + local offset=$2 + local count=$3 + local mtd + + mtd=$(find_mtd_chardev $part) + [ -n "$mtd" ] || \ + ath10kcal_die "no mtd device found for partition $part" + + dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \ + ath10kcal_die "failed to extract calibration data from $mtd" +} + +ath10kcal_patch_mac() { + local mac=$1 + + [ -z "$mac" ] && return + + macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6 +} + +[ -e /lib/firmware/$FIRMWARE ] && exit 0 + +. /lib/ipq806x.sh +. /lib/functions.sh +. /lib/functions/system.sh + +board=$(ipq806x_board_name) + + +case "$FIRMWARE" in +"ath10k/cal-pci-0000:01:00.0.bin") + case $board in + c2600) + ath10kcal_extract "radio" 4096 12064 +# ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -1) + ;; + esac + ;; +"ath10k/cal-pci-0001:01:00.0.bin") + case $board in + c2600) + ath10kcal_extract "radio" 20480 12064 +# ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -2) + ;; + esac + ;; +*) + exit 1 + ;; +esac diff --git a/target/linux/ipq806x/base-files/lib/ipq806x.sh b/target/linux/ipq806x/base-files/lib/ipq806x.sh index db227087f4..73202c0b88 100644 --- a/target/linux/ipq806x/base-files/lib/ipq806x.sh +++ b/target/linux/ipq806x/base-files/lib/ipq806x.sh @@ -17,6 +17,9 @@ ipq806x_board_detect() { *"AP148") name="ap148" ;; + *"C2600") + name="c2600" + ;; *"D7800") name="d7800" ;; diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh index 542b5cecde..a181f13b43 100644 --- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh +++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh @@ -12,6 +12,14 @@ platform_check_image() { nand_do_platform_check $board $1 return $?; ;; + c2600) + local magic_long="$(get_magic_long "$1")" + [ "$magic_long" != "27051956" ] && { + echo "Invalid image, bad magic: $magic_long" + return 1 + } + return 0; + ;; *) return 1; esac @@ -29,4 +37,14 @@ platform_pre_upgrade() { esac } -# use default for platform_do_upgrade() +platform_do_upgrade() { + local board=$(ipq806x_board_name) + + case "$board" in + c2600) + PART_NAME="os-image:rootfs" + MTD_CONFIG_ARGS="-s 0x200000" + default_do_upgrade "$ARGV" + ;; + esac +} |