diff options
Diffstat (limited to 'target/linux/adm5120-2.6/files/arch/mips/adm5120/boards')
8 files changed, 0 insertions, 1028 deletions
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/Makefile b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/Makefile deleted file mode 100644 index a05c891565..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# Makefile for platforms based on ADM5120 SoC -# - -obj-y += generic.o -obj-y += cellvision.o -obj-y += compex.o -obj-y += edimax.o -obj-y += infineon.o -obj-y += mikrotik.o -obj-y += zyxel.o diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/cellvision.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/cellvision.c deleted file mode 100644 index f7d44e2574..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/cellvision.c +++ /dev/null @@ -1,192 +0,0 @@ -/* - * $Id$ - * - * Cellvision/SparkLAN boards - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/bootinfo.h> -#include <asm/gpio.h> - -#include <asm/mach-adm5120/adm5120_board.h> -#include <asm/mach-adm5120/adm5120_platform.h> - -static void switch_bank_gpio5(unsigned bank) -{ - switch (bank) { - case 0: - gpio_set_value(ADM5120_GPIO_PIN5, 0); - break; - case 1: - gpio_set_value(ADM5120_GPIO_PIN5, 1); - break; - } -} - -static struct mtd_partition cas6xx_partitions[] = { - { - .name = "admboot", - .offset = 0, - .size = 32*1024, - .mask_flags = MTD_WRITEABLE, - } , { - .name = "config", - .offset = MTDPART_OFS_APPEND, - .size = 32*1024, - } , { - .name = "nvfs1", - .offset = MTDPART_OFS_APPEND, - .size = 64*1024, - } , { - .name = "nvfs2", - .offset = MTDPART_OFS_APPEND, - .size = 64*1024, - } , { - .name = "firmware", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct mtd_partition cas7xx_partitions[] = { - { - .name = "admboot", - .offset = 0, - .size = 32*1024, - .mask_flags = MTD_WRITEABLE, - } , { - .name = "config", - .offset = MTDPART_OFS_APPEND, - .size = 32*1024, - } , { - .name = "nvfs", - .offset = MTDPART_OFS_APPEND, - .size = 128*1024, - } , { - .name = "firmware", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct platform_device *cas6xx_devices[] __initdata = { - &adm5120_flash0_device, -}; - -static struct platform_device *cas7xx_devices[] __initdata = { - &adm5120_flash0_device, -}; - -static void __init cas6xx_setup(void) -{ - gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ - gpio_direction_output(ADM5120_GPIO_PIN5, 0); - - /* setup data for flash0 device */ - adm5120_flash0_data.switch_bank = switch_bank_gpio5; - adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions); - adm5120_flash0_data.parts = cas6xx_partitions; - - /* TODO: setup mac address */ -} - -static void __init cas7xx_setup(void) -{ - gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ - gpio_direction_output(ADM5120_GPIO_PIN5, 0); - - /* setup data for flash0 device */ - adm5120_flash0_data.switch_bank = switch_bank_gpio5; - adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas7xx_partitions); - adm5120_flash0_data.parts = cas7xx_partitions; - - /* TODO: setup mac address */ -} - -static struct adm5120_board cas630_board __initdata = { - .mach_type = MACH_ADM5120_CAS630, - .name = "Cellvision CAS-630/630W", - .board_setup = cas6xx_setup, - .eth_num_ports = 1, - .num_devices = ARRAY_SIZE(cas6xx_devices), - .devices = cas6xx_devices, -}; - -static struct adm5120_board cas670_board __initdata = { - .mach_type = MACH_ADM5120_CAS670, - .name = "Cellvision CAS-670/670W", - .board_setup = cas6xx_setup, - .eth_num_ports = 1, - .num_devices = ARRAY_SIZE(cas6xx_devices), - .devices = cas6xx_devices, -}; - -static struct adm5120_board cas700_board __initdata = { - .mach_type = MACH_ADM5120_CAS700, - .name = "Cellvision CAS-700/700W", - .board_setup = cas7xx_setup, - .eth_num_ports = 1, - .num_devices = ARRAY_SIZE(cas7xx_devices), - .devices = cas7xx_devices, -}; - -static struct adm5120_board cas771_board __initdata = { - .mach_type = MACH_ADM5120_CAS771, - .name = "Cellvision CAS-771/771W", - .board_setup = cas7xx_setup, - .eth_num_ports = 1, - .num_devices = ARRAY_SIZE(cas7xx_devices), - .devices = cas7xx_devices, -}; - -static struct adm5120_board cas790_board __initdata = { - .mach_type = MACH_ADM5120_CAS790, - .name = "Cellvision CAS-790", - .board_setup = cas7xx_setup, - .eth_num_ports = 1, - .num_devices = ARRAY_SIZE(cas7xx_devices), - .devices = cas7xx_devices, -}; - -static struct adm5120_board cas861_board __initdata = { - .mach_type = MACH_ADM5120_CAS861, - .name = "Cellvision CAS-861/861W", - .board_setup = cas7xx_setup, - .eth_num_ports = 1, - .num_devices = ARRAY_SIZE(cas7xx_devices), - .devices = cas7xx_devices, -}; - -static int __init register_boards(void) -{ - adm5120_board_register(&cas630_board); - adm5120_board_register(&cas670_board); - adm5120_board_register(&cas700_board); - adm5120_board_register(&cas771_board); - adm5120_board_register(&cas790_board); - adm5120_board_register(&cas861_board); - return 0; -} - -pure_initcall(register_boards); diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/compex.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/compex.c deleted file mode 100644 index 620179744e..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/compex.c +++ /dev/null @@ -1,222 +0,0 @@ -/* - * $Id$ - * - * Compex boards - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/bootinfo.h> -#include <asm/gpio.h> - -#include <asm/mach-adm5120/adm5120_board.h> -#include <asm/mach-adm5120/adm5120_platform.h> - -static void switch_bank_gpio5(unsigned bank) -{ - switch (bank) { - case 0: - gpio_set_value(ADM5120_GPIO_PIN5, 0); - break; - case 1: - gpio_set_value(ADM5120_GPIO_PIN5, 1); - break; - } -} - -static void wp54_reset(void) -{ - gpio_set_value(ADM5120_GPIO_PIN3, 0); -} - -static struct mtd_partition wp54g_wrt_partitions[] = { - { - .name = "cfe", - .offset = 0, - .size = 0x050000, - .mask_flags = MTD_WRITEABLE, - } , { - .name = "trx", - .offset = MTDPART_OFS_APPEND, - .size = 0x3A0000, - } , { - .name = "nvram", - .offset = MTDPART_OFS_APPEND, - .size = 0x010000, - } -}; - -static struct platform_device *np2xg_devices[] __initdata = { - &adm5120_flash0_device, - &adm5120_usbc_device, -}; - -static struct platform_device *wp54_devices[] __initdata = { - &adm5120_flash0_device, -}; - -static void __init np2xg_setup(void) -{ - gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ - gpio_direction_output(ADM5120_GPIO_PIN5, 0); - - /* setup data for flash0 device */ - adm5120_flash0_data.switch_bank = switch_bank_gpio5; - - /* TODO: setup mac address */ -} - -static void __init wp54_setup(void) -{ - gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ - gpio_direction_output(ADM5120_GPIO_PIN5, 0); - - gpio_request(ADM5120_GPIO_PIN3, NULL); /* for system reset */ - gpio_direction_output(ADM5120_GPIO_PIN3, 1); - - - /* setup data for flash0 device */ - adm5120_flash0_data.switch_bank = switch_bank_gpio5; - - /* TODO: setup mac address */ -} - -static void __init wp54_wrt_setup(void) -{ - gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ - gpio_direction_output(ADM5120_GPIO_PIN5, 0); - - gpio_request(ADM5120_GPIO_PIN3, NULL); /* for system reset */ - gpio_direction_output(ADM5120_GPIO_PIN3, 1); - - /* setup data for flash0 device */ - adm5120_flash0_data.switch_bank = switch_bank_gpio5; - adm5120_flash0_data.nr_parts = ARRAY_SIZE(wp54g_wrt_partitions); - adm5120_flash0_data.parts = wp54g_wrt_partitions; - - /* TODO: setup mac address */ -} - -unsigned char np27g_vlans[6] __initdata = { - /* FIXME: untested */ - 0x41, 0x42, 0x44, 0x48, 0x50, 0x00 -}; - -unsigned char np28g_vlans[6] __initdata = { - /* FIXME: untested */ - 0x41, 0x42, 0x44, 0x48, 0x00, 0x00 -}; - -unsigned char wp54_vlans[6] __initdata = { - /* FIXME: untested */ - 0x41, 0x42, 0x00, 0x00, 0x00, 0x00 -}; - -static struct adm5120_board np27g_board __initdata = { - .mach_type = MACH_ADM5120_NP27G, - .name = "Compex NetPassage 27G", - .board_setup = np2xg_setup, - .eth_num_ports = 5, - .eth_vlans = np27g_vlans, - .num_devices = ARRAY_SIZE(np2xg_devices), - .devices = np2xg_devices, -}; - -static struct adm5120_board np28g_board __initdata = { - .mach_type = MACH_ADM5120_NP28G, - .name = "Compex NetPassage 28G", - .board_setup = np2xg_setup, - .eth_num_ports = 4, - .eth_vlans = np28g_vlans, - .num_devices = ARRAY_SIZE(np2xg_devices), - .devices = np2xg_devices, -}; - -static struct adm5120_board wp54ag_board __initdata = { - .mach_type = MACH_ADM5120_WP54AG, - .name = "Compex WP54AG", - .board_setup = wp54_setup, - .board_reset = wp54_reset, - .eth_num_ports = 2, - .eth_vlans = wp54_vlans, - .num_devices = ARRAY_SIZE(wp54_devices), - .devices = wp54_devices, -}; - -static struct adm5120_board wp54g_board __initdata = { - .mach_type = MACH_ADM5120_WP54G, - .name = "Compex WP54G", - .board_setup = wp54_setup, - .board_reset = wp54_reset, - .eth_num_ports = 2, - .eth_vlans = wp54_vlans, - .num_devices = ARRAY_SIZE(wp54_devices), - .devices = wp54_devices, -}; - -static struct adm5120_board wp54g_wrt_board __initdata = { - .mach_type = MACH_ADM5120_WP54G, - .name = "Compex WP54G-WRT", - .board_setup = wp54_wrt_setup, - .board_reset = wp54_reset, - .eth_num_ports = 2, - .eth_vlans = wp54_vlans, - .num_devices = ARRAY_SIZE(wp54_devices), - .devices = wp54_devices, -}; - -static struct adm5120_board wpp54ag_board __initdata = { - .mach_type = MACH_ADM5120_WPP54AG, - .name = "Compex WPP54AG", - .board_setup = wp54_setup, - .board_reset = wp54_reset, - .eth_num_ports = 2, - .eth_vlans = wp54_vlans, - .num_devices = ARRAY_SIZE(wp54_devices), - .devices = wp54_devices, -}; - -static struct adm5120_board wpp54g_board __initdata = { - .mach_type = MACH_ADM5120_WPP54G, - .name = "Compex WPP54G", - .board_setup = wp54_setup, - .board_reset = wp54_reset, - .eth_num_ports = 2, - .eth_vlans = wp54_vlans, - .num_devices = ARRAY_SIZE(wp54_devices), - .devices = wp54_devices, -}; - -static int __init register_boards(void) -{ - adm5120_board_register(&np27g_board); - adm5120_board_register(&np28g_board); - adm5120_board_register(&wp54ag_board); - adm5120_board_register(&wp54g_board); - adm5120_board_register(&wp54g_wrt_board); - adm5120_board_register(&wpp54ag_board); - adm5120_board_register(&wpp54g_board); - return 0; -} - -pure_initcall(register_boards); diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/edimax.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/edimax.c deleted file mode 100644 index a184cbce44..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/edimax.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * $Id$ - * - * Edimax boards - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/bootinfo.h> -#include <asm/gpio.h> - -#include <asm/mach-adm5120/adm5120_board.h> -#include <asm/mach-adm5120/adm5120_platform.h> - -static struct mtd_partition br6104k_partitions[] = { - { - .name = "admboot", - .offset = 0, - .size = 32*1024, - .mask_flags = MTD_WRITEABLE, - } , { - .name = "config", - .offset = MTDPART_OFS_APPEND, - .size = 32*1024, - } , { - .name = "firmware", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct platform_device *br6104k_devices[] __initdata = { - &adm5120_flash0_device, -}; - -static void __init br6104k_setup(void) { - /* setup data for flash0 device */ - adm5120_flash0_data.nr_parts = ARRAY_SIZE(br6104k_partitions); - adm5120_flash0_data.parts = br6104k_partitions; - - /* TODO: setup mac addresses, if possible */ -} - -unsigned char br6104k_vlans[6] = { - 0x41, 0x42, 0x44, 0x48, 0x50, 0x00 -}; - -static struct adm5120_board br6104k_board __initdata = { - .mach_type = MACH_ADM5120_BR6104K, - .name = "Edimax BR-6104K", - .board_setup = br6104k_setup, - .eth_num_ports = 5, - .eth_vlans = br6104k_vlans, - .num_devices = ARRAY_SIZE(br6104k_devices), - .devices = br6104k_devices, -}; - -static int __init register_boards(void) -{ - adm5120_board_register(&br6104k_board); - return 0; -} - -pure_initcall(register_boards); diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/generic.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/generic.c deleted file mode 100644 index de78ca40ea..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/generic.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * $Id$ - * - * Generic ADM5120 based board - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/bootinfo.h> -#include <asm/gpio.h> - -#include <asm/mach-adm5120/adm5120_board.h> -#include <asm/mach-adm5120/adm5120_platform.h> - -static struct platform_device *generic_devices[] __initdata = { - &adm5120_flash0_device, -}; - -static struct adm5120_board generic_board __initdata = { - .mach_type = MACH_ADM5120_GENERIC, - .name = "Generic ADM5120 board", - .eth_num_ports = 6, - .num_devices = ARRAY_SIZE(generic_devices), - .devices = generic_devices, -}; - -static int __init register_boards(void) -{ - adm5120_board_register(&generic_board); - return 0; -} - -pure_initcall(register_boards); diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/infineon.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/infineon.c deleted file mode 100644 index ebeb5aa87b..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/infineon.c +++ /dev/null @@ -1,167 +0,0 @@ -/* - * $Id$ - * - * Infineon boards - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/bootinfo.h> -#include <asm/gpio.h> - -#include <asm/mach-adm5120/adm5120_board.h> -#include <asm/mach-adm5120/adm5120_platform.h> - -static void switch_bank_gpio3(unsigned bank) -{ - switch (bank) { - case 0: - gpio_set_value(ADM5120_GPIO_PIN3, 0); - break; - case 1: - gpio_set_value(ADM5120_GPIO_PIN3, 1); - break; - } -} - -static void switch_bank_gpio5(unsigned bank) -{ - switch (bank) { - case 0: - gpio_set_value(ADM5120_GPIO_PIN5, 0); - break; - case 1: - gpio_set_value(ADM5120_GPIO_PIN5, 1); - break; - } -} - -static struct mtd_partition easy_partitions[] = { - { - .name = "admboot", - .offset = 0, - .size = 64*1024, - .mask_flags = MTD_WRITEABLE, - } , { - .name = "boardcfg", - .offset = MTDPART_OFS_APPEND, - .size = 64*1024, - } , { - .name = "firmware", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct platform_device *easy5120pata_devices[] __initdata = { - &adm5120_flash0_device, - /* TODO: add VINETIC2 device? */ -}; - -static struct platform_device *easy5120rt_devices[] __initdata = { - &adm5120_flash0_device, - &adm5120_usbc_device -}; - -static struct platform_device *easy5120wvoip_devices[] __initdata = { - &adm5120_flash0_device, - /* TODO: add VINETIC2 device? */ -}; - -static struct platform_device *easy83000_devices[] __initdata = { - &adm5120_flash0_device, - /* TODO: add VINAX device? */ -}; - -static void __init easy_setup_pqfp(void) -{ - gpio_request(ADM5120_GPIO_PIN3, NULL); /* for flash A20 line */ - gpio_direction_output(ADM5120_GPIO_PIN3, 0); - - /* setup data for flash0 device */ - adm5120_flash0_data.switch_bank = switch_bank_gpio3; - adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions); - adm5120_flash0_data.parts = easy_partitions; - - /* TODO: setup mac addresses */ -} - -static void __init easy_setup_bga(void) -{ - gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ - gpio_direction_output(ADM5120_GPIO_PIN5, 0); - - /* setup data for flash0 device */ - adm5120_flash0_data.switch_bank = switch_bank_gpio5; - adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions); - adm5120_flash0_data.parts = easy_partitions; - - /* TODO: setup mac addresses */ -} - -static struct adm5120_board easy5120pata_board __initdata = { - .mach_type = MACH_ADM5120_EASY5120PATA, - .name = "Infineon EASY 5120P-ATA Reference Board", - .board_setup = easy_setup_pqfp, - .eth_num_ports = 6, - .num_devices = ARRAY_SIZE(easy5120pata_devices), - .devices = easy5120pata_devices, -}; - -static struct adm5120_board easy5120rt_board __initdata = { - .mach_type = MACH_ADM5120_EASY5120RT, - .name = "Infineon EASY 5120-RT Reference Board", - .board_setup = easy_setup_bga, - .eth_num_ports = 5, - .num_devices = ARRAY_SIZE(easy5120rt_devices), - .devices = easy5120rt_devices, -}; - -static struct adm5120_board easy5120wvoip_board __initdata = { - .mach_type = MACH_ADM5120_EASY5120WVOIP, - .name = "Infineon EASY 5120-WVoIP Reference Board", - .board_setup = easy_setup_bga, - .eth_num_ports = 6, - .num_devices = ARRAY_SIZE(easy5120wvoip_devices), - .devices = easy5120wvoip_devices, -}; - -static struct adm5120_board easy83000_board __initdata = { - .mach_type = MACH_ADM5120_EASY83000, - .name = "Infineon EASY 83000 Reference Board", - .board_setup = easy_setup_pqfp, - .eth_num_ports = 6, - .num_devices = ARRAY_SIZE(easy83000_devices), - .devices = easy83000_devices, -}; - -static int __init register_boards(void) -{ - adm5120_board_register(&easy5120pata_board); - adm5120_board_register(&easy5120rt_board); - adm5120_board_register(&easy5120wvoip_board); - adm5120_board_register(&easy83000_board); - return 0; -} - -pure_initcall(register_boards); diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/mikrotik.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/mikrotik.c deleted file mode 100644 index f233772d0d..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/mikrotik.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - * $Id$ - * - * Mikrotik RouterBOARDs 111/112/133/133C/150/153 - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/bootinfo.h> -#include <asm/gpio.h> - -#include <asm/mach-adm5120/adm5120_board.h> -#include <asm/mach-adm5120/adm5120_platform.h> - -static struct mtd_partition rb1xx_partitions[] = { - { - .name = "booter", - .offset = 0, - .size = 64*1024, - .mask_flags = MTD_WRITEABLE, - } , { - .name = "firmware", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct platform_device *rb1xx_devices[] __initdata = { - &adm5120_flash0_device, - &adm5120_nand_device, -}; - -static struct platform_device *rb150_devices[] __initdata = { - &adm5120_flash0_device, - /* TODO: nand device is not yet supported */ -}; - -static void __init rb1xx_setup(void) -{ - /* setup data for flash0 device */ - adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_partitions); - adm5120_flash0_data.parts = rb1xx_partitions; - - /* TODO: setup mac address */ -} - -#if 0 -/* - * RB1xx boards have bad network performance with the default VLAN matrixes. - * Disable it while the ethernet driver gets fixed. - */ -static unsigned char rb11x_vlans[6] __initdata = { - /* FIXME: untested */ - 0x41, 0x00, 0x00, 0x00, 0x00, 0x00 -}; - -static unsigned char rb133_vlans[6] __initdata = { - /* FIXME: untested */ - 0x44, 0x42, 0x41, 0x00, 0x00, 0x00 -}; - -static unsigned char rb133c_vlans[6] __initdata = { - /* FIXME: untested */ - 0x44, 0x00, 0x00, 0x00, 0x00, 0x00 -}; - -static unsigned char rb15x_vlans[6] __initdata = { - /* FIXME: untested */ - 0x41, 0x42, 0x44, 0x48, 0x50, 0x00 -}; -#else -static unsigned char rb_vlans[6] __initdata = { - 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00 -}; -#define rb11x_vlans rb_vlans -#define rb133_vlans rb_vlans -#define rb133c_vlans rb_vlans -#define rb15x_vlans rb_vlans -#endif - -static struct adm5120_board rb111_board __initdata = { - .mach_type = MACH_ADM5120_RB_111, - .name = "Mikrotik RouterBOARD 111", - .board_setup = rb1xx_setup, - .eth_num_ports = 1, - .eth_vlans = rb11x_vlans, - .num_devices = ARRAY_SIZE(rb1xx_devices), - .devices = rb1xx_devices, -}; - -static struct adm5120_board rb112_board __initdata = { - .mach_type = MACH_ADM5120_RB_112, - .name = "Mikrotik RouterBOARD 112", - .board_setup = rb1xx_setup, - .eth_num_ports = 1, - .eth_vlans = rb11x_vlans, - .num_devices = ARRAY_SIZE(rb1xx_devices), - .devices = rb1xx_devices, -}; - -static struct adm5120_board rb133_board __initdata = { - .mach_type = MACH_ADM5120_RB_133, - .name = "Mikrotik RouterBOARD 133", - .board_setup = rb1xx_setup, - .eth_num_ports = 3, - .eth_vlans = rb133_vlans, - .num_devices = ARRAY_SIZE(rb1xx_devices), - .devices = rb1xx_devices, -}; - -static struct adm5120_board rb133c_board __initdata = { - .mach_type = MACH_ADM5120_RB_133C, - .name = "Mikrotik RouterBOARD 133C", - .board_setup = rb1xx_setup, - .eth_num_ports = 1, - .eth_vlans = rb133c_vlans, - .num_devices = ARRAY_SIZE(rb1xx_devices), - .devices = rb1xx_devices, -}; - -static struct adm5120_board rb150_board __initdata = { - .mach_type = MACH_ADM5120_RB_150, - .name = "Mikrotik RouterBOARD 150", - .board_setup = rb1xx_setup, - .eth_num_ports = 5, - .eth_vlans = rb15x_vlans, - .num_devices = ARRAY_SIZE(rb150_devices), - .devices = rb150_devices, -}; - -static struct adm5120_board rb153_board __initdata = { - .mach_type = MACH_ADM5120_RB_153, - .name = "Mikrotik RouterBOARD 153", - .board_setup = rb1xx_setup, - .eth_num_ports = 5, - .eth_vlans = rb15x_vlans, - .num_devices = ARRAY_SIZE(rb1xx_devices), - .devices = rb1xx_devices, -}; - -static int __init register_boards(void) -{ - adm5120_board_register(&rb111_board); - adm5120_board_register(&rb112_board); - adm5120_board_register(&rb133_board); - adm5120_board_register(&rb133c_board); - adm5120_board_register(&rb150_board); - adm5120_board_register(&rb153_board); - return 0; -} - -pure_initcall(register_boards); diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/zyxel.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/zyxel.c deleted file mode 100644 index 0a60205ebf..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/zyxel.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - * $Id$ - * - * ZyXEL Prestige P-334/P-335 boards - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/bootinfo.h> -#include <asm/gpio.h> - -#include <asm/mach-adm5120/adm5120_board.h> -#include <asm/mach-adm5120/adm5120_platform.h> - -static void switch_bank_gpio5(unsigned bank) -{ - switch (bank) { - case 0: - gpio_set_value(ADM5120_GPIO_PIN5, 0); - break; - case 1: - gpio_set_value(ADM5120_GPIO_PIN5, 1); - break; - } -} - -static struct mtd_partition p33x_partitions[] = { - { - .name = "bootbase", - .offset = 0, - .size = 16*1024, - .mask_flags = MTD_WRITEABLE, - } , { - .name = "rom", - .offset = MTDPART_OFS_APPEND, - .size = 16*1024, - } , { - .name = "bootext", - .offset = MTDPART_OFS_APPEND, - .size = 96*1024, - .mask_flags = MTD_WRITEABLE, - } , { - .name = "trx", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - } , { - .name = "firmware", - .offset = 32*1024, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct platform_device *p334_devices[] __initdata = { - &adm5120_flash0_device, -}; - -static struct platform_device *p335_devices[] __initdata = { - &adm5120_flash0_device, - &adm5120_usbc_device, -}; - -static void __init p33x_setup(void) -{ - gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ - gpio_direction_output(ADM5120_GPIO_PIN5, 0); - - /* setup data for flash0 device */ - adm5120_flash0_data.switch_bank = switch_bank_gpio5; - adm5120_flash0_data.nr_parts = ARRAY_SIZE(p33x_partitions); - adm5120_flash0_data.parts = p33x_partitions; - - /* TODO: setup mac address */ -} - -unsigned char p33x_vlans[6] __initdata = { - /* FIXME: untested */ - 0x50, 0x48, 0x44, 0x42, 0x41, 0x00 -}; - -static struct adm5120_board p334wt_board __initdata = { - .mach_type = MACH_ADM5120_P334WT, - .name = "ZyXEL Prestige 334WT", - .board_setup = p33x_setup, - .eth_num_ports = 5, - .eth_vlans = p33x_vlans, - .num_devices = ARRAY_SIZE(p334_devices), - .devices = p334_devices, -}; - -static struct adm5120_board p335_board __initdata = { - .mach_type = MACH_ADM5120_P335, - .name = "ZyXEL Prestige 335/335WT", - .board_setup = p33x_setup, - .eth_num_ports = 5, - .eth_vlans = p33x_vlans, - .num_devices = ARRAY_SIZE(p335_devices), - .devices = p335_devices, -}; - -static int __init register_boards(void) -{ - adm5120_board_register(&p334wt_board); - adm5120_board_register(&p335_board); - return 0; -} - -pure_initcall(register_boards); |