aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/adm5120-2.6/image/Makefile14
-rw-r--r--target/linux/adm5120-2.6/image/lzma-loader/src/board.c20
-rw-r--r--target/linux/adm5120eb-2.6/image/Makefile3
3 files changed, 25 insertions, 12 deletions
diff --git a/target/linux/adm5120-2.6/image/Makefile b/target/linux/adm5120-2.6/image/Makefile
index 732b82de3e..352ebf480f 100644
--- a/target/linux/adm5120-2.6/image/Makefile
+++ b/target/linux/adm5120-2.6/image/Makefile
@@ -82,7 +82,7 @@ root=/dev/mtdblock1 rootfstype=yaffs2 init=/etc/preinit
endef
define Image/Build/RouterBoard
- $(CP) $(KDIR)/vmlinux.elf $(IMGNAME)-vmlinux
+ $(CP) $(KDIR)/vmlinux.elf $(IMGNAME)-rb1xx-vmlinux
$(STAGING_DIR)/bin/patch-cmdline $(KDIR)/vmlinux.elf '$(strip $(call Image/cmdline/yaffs2)) '
endef
@@ -91,6 +91,7 @@ define Image/Build
ifneq ($(1),jffs2-256k)
ifneq ($(1),jffs2-128k)
$(call Image/Build/Compex,$(1),wp54g-wrt,$(patsubst jffs2-%,jffs2,$(1)),WP54G-WRT)
+ifeq (CONFIG_DEVEL,y)
$(call Image/Build/Edimax,$(1),br-6104k,$(patsubst jffs2-%,jffs2,$(1)),BR-6104K)
$(call Image/Build/Edimax,$(1),br-6104kp,$(patsubst jffs2-%,jffs2,$(1)),BR-6104KP)
$(call Image/Build/Edimax,$(1),br-6114wg,$(patsubst jffs2-%,jffs2,$(1)),BR-6114WG)
@@ -117,6 +118,7 @@ ifneq ($(1),jffs2-128k)
$(call Image/Build/MyLoader,$(1),wpp54ag,$(patsubst jffs2-%,jffs2,$(1)),WPP54AG)
endif
endif
+endif
ifeq ($(1),tgz)
$(call Image/Build/RouterBoard)
endif
@@ -143,12 +145,17 @@ define Image/Build/LZMAKernel/Admboot
$(call Image/Build/LZMAKernel,$(1),$(2),0x80500000,0x6D8,y,$(1))
endef
+define Image/Build/Initramfs/RouterBoard
+ $(CP) $(KDIR)/vmlinux.elf $(IMGNAME)-ramfs-rb1xx.elf
+endef
+
define Image/Build/Initramfs
+ $(call Image/Build/Initramfs/RouterBoard)
+ $(call Image/Build/LZMAKernel/Compex,wp54g-wrt,bin)
+ifeq (CONFIG_DEVEL,y)
$(call Image/Build/LZMAKernel/Generic,generic,bin)
- $(call Image/Build/LZMAKernel/Generic,rb-100,elf)
$(call Image/Build/LZMAKernel/Generic,np27g,bin)
$(call Image/Build/LZMAKernel/Generic,wp54g,bin)
- $(call Image/Build/LZMAKernel/Compex,wp54g-wrt,bin)
$(call Image/Build/LZMAKernel/Admboot,br-6104k,gz)
$(call Image/Build/LZMAKernel/Admboot,easy-5120,gz)
$(call Image/Build/LZMAKernel/Admboot,easy-83000,gz)
@@ -158,6 +165,7 @@ define Image/Build/Initramfs
$(call Image/Build/LZMAKernel/Admboot,cas-771,gz)
$(call Image/Build/LZMAKernel/Admboot,cas-790,gz)
$(call Image/Build/LZMAKernel/Admboot,cas-861,gz)
+endif
endef
$(eval $(call BuildImage))
diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/board.c b/target/linux/adm5120-2.6/image/lzma-loader/src/board.c
index 616e7562a8..baffe04ef1 100644
--- a/target/linux/adm5120-2.6/image/lzma-loader/src/board.c
+++ b/target/linux/adm5120-2.6/image/lzma-loader/src/board.c
@@ -1,5 +1,5 @@
/*
- * ADM5120 specific board support for LZMA decompressor
+ * ADM5120 specific board support for LZMA decompressor
*
* Copyright (C) 2007 OpenWrt.org
* Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
@@ -24,7 +24,7 @@
#define READREG(r) *(volatile unsigned int *)(r)
#define WRITEREG(r,v) *(volatile unsigned int *)(r) = v
-/*
+/*
* INTC definitions
*/
#define INTC_BASE 0xB2200000
@@ -32,7 +32,7 @@
/* INTC registers */
#define INTC_REG_IRQ_DISABLE 0x0C
-/*
+/*
* UART definitions
*/
#define UART_BASE 0xB2600000
@@ -61,7 +61,7 @@
#define UART_FLAG_RXFF ( 1 << 6 ) /* RX FIFO full */
#define UART_FLAG_TXFE ( 1 << 7 ) /* TX FIFO empty */
-/*
+/*
* SWITCH definitions
*/
#define SWITCH_BASE 0xB2000000
@@ -96,8 +96,9 @@
static void uart_init(void)
{
+#if 0
unsigned int t;
-
+
/* disable uart */
UART_WRITE(UART_REG_CTRL, 0);
@@ -106,7 +107,7 @@ static void uart_init(void)
UART_WRITE(UART_REG_LCRM, t);
t = UART_READ(UART_REG_LCRL);
UART_WRITE(UART_REG_LCRL, t);
-
+
/* keep data, stop, and parity bits, but disable FIFO */
t = UART_READ(UART_REG_LCRH);
t &= ~(UART_LCRH_FEN);
@@ -117,6 +118,7 @@ static void uart_init(void)
/* enable uart, and disable interrupts */
UART_WRITE(UART_REG_CTRL, UART_CTRL_EN);
+#endif
}
static void uart_putc(int ch)
@@ -125,7 +127,7 @@ static void uart_putc(int ch)
UART_WRITE(UART_REG_DATA, ch);
- while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFF) != 0);
+ while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0);
}
/*
@@ -150,7 +152,7 @@ static void intc_init(void)
static void switch_init(void)
{
/* disable PHYS ports */
- SWITCH_WRITE(SWITCH_REG_PORT_CONF0,
+ SWITCH_WRITE(SWITCH_REG_PORT_CONF0,
(SWITCH_PORTS_HW << PORT_CONF0_DP_SHIFT));
/* disable CPU port */
@@ -159,7 +161,7 @@ static void switch_init(void)
/* disable GPIO lines */
SWITCH_WRITE(SWITCH_REG_GPIO_CONF0, 0);
SWITCH_WRITE(SWITCH_REG_GPIO_CONF2, 0);
-
+
/* disable LED lines */
SWITCH_WRITE(SWITCH_REG_PORT0_LED, 0);
SWITCH_WRITE(SWITCH_REG_PORT1_LED, 0);
diff --git a/target/linux/adm5120eb-2.6/image/Makefile b/target/linux/adm5120eb-2.6/image/Makefile
index 8088726f91..5772272090 100644
--- a/target/linux/adm5120eb-2.6/image/Makefile
+++ b/target/linux/adm5120eb-2.6/image/Makefile
@@ -69,8 +69,11 @@ define Image/Build/LZMAKernel/ZyXEL
endef
define Image/Build/Initramfs
+# this line is here intentionally
+ifeq (CONFIG_DEVEL,y)
$(call Image/Build/LZMAKernel/ZyXEL,p-334wt,bin)
$(call Image/Build/LZMAKernel/ZyXEL,p-335,bin)
+endif
endef
$(eval $(call BuildImage))