From d89aa2c3d69c564d49df0348059af9e041b3ad03 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Wed, 23 Apr 2014 21:53:50 +0000 Subject: bcm53xx: add initial support for kernel 3.14 Signed-off-by: Hauke Mehrtens SVN-Revision: 40564 --- target/linux/bcm53xx/config-3.14 | 228 +++++++++++++++++++++ ...X-initial-support-for-the-BCM5301X-BCM470.patch | 148 +++++++++++++ ...-ARM-BCM5301X-add-early-debugging-support.patch | 45 ++++ ...42-ARM-BCM5301X-workaround-suppress-fault.patch | 93 +++++++++ ...RM-BCM5301X-add-dts-files-for-BCM4708-SoC.patch | 204 ++++++++++++++++++ .../052-bcm53xx-register-bcma-bus.patch | 59 ++++++ ...-bcma-register-bcma-as-device-tree-driver.patch | 115 +++++++++++ .../patches-3.14/112-bcma-get-irqs-from-dt.patch | 74 +++++++ ...-make-bgmac-work-on-systems-without-nvram.patch | 73 +++++++ 9 files changed, 1039 insertions(+) create mode 100644 target/linux/bcm53xx/config-3.14 create mode 100644 target/linux/bcm53xx/patches-3.14/040-ARM-BCM5301X-initial-support-for-the-BCM5301X-BCM470.patch create mode 100644 target/linux/bcm53xx/patches-3.14/041-ARM-BCM5301X-add-early-debugging-support.patch create mode 100644 target/linux/bcm53xx/patches-3.14/042-ARM-BCM5301X-workaround-suppress-fault.patch create mode 100644 target/linux/bcm53xx/patches-3.14/050-ARM-BCM5301X-add-dts-files-for-BCM4708-SoC.patch create mode 100644 target/linux/bcm53xx/patches-3.14/052-bcm53xx-register-bcma-bus.patch create mode 100644 target/linux/bcm53xx/patches-3.14/111-bcma-register-bcma-as-device-tree-driver.patch create mode 100644 target/linux/bcm53xx/patches-3.14/112-bcma-get-irqs-from-dt.patch create mode 100644 target/linux/bcm53xx/patches-3.14/202-bgmac-make-bgmac-work-on-systems-without-nvram.patch (limited to 'target/linux/bcm53xx') diff --git a/target/linux/bcm53xx/config-3.14 b/target/linux/bcm53xx/config-3.14 new file mode 100644 index 0000000000..e4f27a4e20 --- /dev/null +++ b/target/linux/bcm53xx/config-3.14 @@ -0,0 +1,228 @@ +CONFIG_ALIGNMENT_TRAP=y +CONFIG_ARCH_BCM=y +CONFIG_ARCH_BCM_5301X=y +# CONFIG_ARCH_BCM_MOBILE is not set +CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_HAS_TICK_BROADCAST=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MULTIPLATFORM=y +# CONFIG_ARCH_MULTI_CPU_AUTO is not set +CONFIG_ARCH_MULTI_V6_V7=y +CONFIG_ARCH_MULTI_V7=y +# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set +CONFIG_ARCH_NR_GPIO=0 +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_ARM=y +CONFIG_ARM_APPENDED_DTB=y +# CONFIG_ARM_ATAG_DTB_COMPAT is not set +# CONFIG_ARM_CPU_SUSPEND is not set +CONFIG_ARM_GIC=y +CONFIG_ARM_GLOBAL_TIMER=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_ARM_L1_CACHE_SHIFT_6=y +# CONFIG_ARM_LPAE is not set +CONFIG_ARM_NR_BANKS=8 +CONFIG_ARM_PATCH_PHYS_VIRT=y +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +CONFIG_ARM_VIRT_EXT=y +CONFIG_ATAGS=y +CONFIG_AUTO_ZRELADDR=y +CONFIG_B53=y +# CONFIG_B53_MMAP_DRIVER is not set +# CONFIG_B53_PHY_DRIVER is not set +CONFIG_B53_SRAB_DRIVER=y +CONFIG_BCMA=y +CONFIG_BCMA_BLOCKIO=y +CONFIG_BCMA_DEBUG=y +CONFIG_BCMA_DRIVER_GMAC_CMN=y +CONFIG_BCMA_HOST_PCI=y +CONFIG_BCMA_HOST_PCI_POSSIBLE=y +CONFIG_BCMA_HOST_SOC=y +# CONFIG_BCM_KONA_WDT is not set +CONFIG_BGMAC=y +CONFIG_CACHE_L2X0=y +CONFIG_CACHE_PL310=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y +CONFIG_CLKSRC_OF=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_COMMON_CLK=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +CONFIG_CPU_HAS_ASID=y +# CONFIG_CPU_ICACHE_DISABLE is not set +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_RMAP=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_V7=y +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_DEBUG_BCM_5301X=y +# CONFIG_DEBUG_BCM_KONA_UART is not set +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_LL=y +CONFIG_DEBUG_LL_INCLUDE="debug/pl01x.S" +# CONFIG_DEBUG_LL_UART_8250 is not set +# CONFIG_DEBUG_LL_UART_PL01X is not set +# CONFIG_DEBUG_UART_8250 is not set +CONFIG_DEBUG_UART_PHYS=0x18000300 +CONFIG_DEBUG_UART_PL01X=y +CONFIG_DEBUG_UART_VIRT=0xf1000300 +CONFIG_DEBUG_UNCOMPRESS=y +CONFIG_DEBUG_USER=y +CONFIG_DTC=y +CONFIG_EARLY_PRINTK=y +CONFIG_FRAME_POINTER=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_NET_UTILS=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_ARM_SCU=y +CONFIG_HAVE_ARM_TWD=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_HAVE_BPF_JIT=y +CONFIG_HAVE_CC_STACKPROTECTOR=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZ4=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_HAVE_KERNEL_XZ=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_SMP=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_UID16=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HZ_FIXED=0 +CONFIG_HZ_PERIODIC=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IOMMU_HELPER=y +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_WORK=y +CONFIG_KTIME_SCALAR=y +CONFIG_MDIO_BOARDINFO=y +CONFIG_MIGHT_HAVE_PCI=y +# CONFIG_MLX5_CORE is not set +CONFIG_MODULES_USE_ELF_REL=y +# CONFIG_MTD_PHYSMAP_OF is not set +CONFIG_MULTI_IRQ_HANDLER=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NET_FLOW_LIMIT=y +CONFIG_NET_RX_BUSY_POLL=y +CONFIG_NO_BOOTMEM=y +CONFIG_NR_CPUS=4 +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_IRQ=y +CONFIG_OF_MDIO=y +CONFIG_OF_MTD=y +CONFIG_OF_NET=y +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y +CONFIG_OLD_SIGACTION=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_OUTER_CACHE=y +CONFIG_OUTER_CACHE_SYNC=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PCI=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PHYLIB=y +# CONFIG_PL310_ERRATA_588369 is not set +# CONFIG_PL310_ERRATA_727915 is not set +# CONFIG_PL310_ERRATA_753970 is not set +# CONFIG_PL310_ERRATA_769419 is not set +# CONFIG_PREEMPT_RCU is not set +CONFIG_RCU_STALL_COMMON=y +CONFIG_RFS_ACCEL=y +CONFIG_RPS=y +CONFIG_SCHED_HRTICK=y +# CONFIG_SCSI_DMA is not set +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SMP=y +CONFIG_SMP_ON_UP=y +CONFIG_SPARSE_IRQ=y +CONFIG_STOP_MACHINE=y +CONFIG_SWCONFIG=y +CONFIG_SWIOTLB=y +# CONFIG_SWP_EMULATE is not set +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +# CONFIG_THUMB2_KERNEL is not set +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TREE_RCU=y +CONFIG_UID16=y +CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" +CONFIG_USB_SUPPORT=y +CONFIG_USE_OF=y +CONFIG_VECTORS_BASE=0xffff0000 +# CONFIG_VFP is not set +# CONFIG_XEN is not set +CONFIG_XPS=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_BCJ=y +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ZBOOT_ROM_TEXT=0x0 +# CONFIG_ZBUD is not set +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/bcm53xx/patches-3.14/040-ARM-BCM5301X-initial-support-for-the-BCM5301X-BCM470.patch b/target/linux/bcm53xx/patches-3.14/040-ARM-BCM5301X-initial-support-for-the-BCM5301X-BCM470.patch new file mode 100644 index 0000000000..c12d8df0b7 --- /dev/null +++ b/target/linux/bcm53xx/patches-3.14/040-ARM-BCM5301X-initial-support-for-the-BCM5301X-BCM470.patch @@ -0,0 +1,148 @@ +From 5b293ebe757213993ae93b6cbbf5e1d09b75ac2f Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Tue, 4 Feb 2014 00:01:43 +0100 +Subject: [PATCH 1/3] ARM: BCM5301X: initial support for the BCM5301X/BCM470X + SoCs with ARM CPU + +This patch adds support for the BCM5301X/BCM470X SoCs with an ARM CPUs. +Currently just booting to a shell is working and nothing else, no +Ethernet, wifi, flash, ... +I have some pending patches to make Ethernet work for this device. +Mostly device tree support for bcma is missing. + +This SoC is used in small office and home router with Broadcom SoCs +it's internal name is Northstar. This code should support the BCM4707, +BCM4708, BCM4709, BCM53010, BCM53011 and BCM53012 SoC. It uses one or +two ARM Cortex A9 Cores, some highlights are 2 PCIe 2.0 controllers, +4 Gigabit Ethernet MACs and a USB 3.0 host controller. + +This SoC uses a dual core CPU, but this is currently not implemented. +More information about this SoC can be found here: +http://www.anandtech.com/show/5925/broadcom-announces-bcm4708x-and-bcm5301x-socs-for-80211ac-routers + +Signed-off-by: Hauke Mehrtens +Acked-by: Arnd Bergmann +Acked-by: Christian Daudt +Signed-off-by: Matt Porter +--- + Documentation/devicetree/bindings/arm/bcm4708.txt | 8 ++++++ + MAINTAINERS | 8 ++++++ + arch/arm/configs/multi_v7_defconfig | 1 + + arch/arm/mach-bcm/Kconfig | 26 +++++++++++++++++++ + arch/arm/mach-bcm/Makefile | 1 + + arch/arm/mach-bcm/bcm_5301x.c | 28 +++++++++++++++++++++ + 6 files changed, 72 insertions(+) + create mode 100644 Documentation/devicetree/bindings/arm/bcm4708.txt + create mode 100644 arch/arm/mach-bcm/bcm_5301x.c + +--- /dev/null ++++ b/Documentation/devicetree/bindings/arm/bcm4708.txt +@@ -0,0 +1,8 @@ ++Broadcom BCM4708 device tree bindings ++------------------------------------------- ++ ++Boards with the BCM4708 SoC shall have the following properties: ++ ++Required root node property: ++ ++compatible = "brcm,bcm4708"; +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -1883,6 +1883,14 @@ F: arch/arm/boot/dts/bcm2835* + F: arch/arm/configs/bcm2835_defconfig + F: drivers/*/*bcm2835* + ++BROADCOM BCM5301X ARM ARCHICTURE ++M: Hauke Mehrtens ++L: linux-arm-kernel@lists.infradead.org ++S: Maintained ++F: arch/arm/mach-bcm/bcm_5301x.c ++F: arch/arm/boot/dts/bcm5301x.dtsi ++F: arch/arm/boot/dts/bcm470* ++ + BROADCOM TG3 GIGABIT ETHERNET DRIVER + M: Nithin Nayak Sujir + M: Michael Chan +--- a/arch/arm/configs/multi_v7_defconfig ++++ b/arch/arm/configs/multi_v7_defconfig +@@ -11,6 +11,7 @@ CONFIG_ARCH_MVEBU=y + CONFIG_MACH_ARMADA_370=y + CONFIG_MACH_ARMADA_XP=y + CONFIG_ARCH_BCM=y ++CONFIG_ARCH_BCM_5301X=y + CONFIG_ARCH_BCM_MOBILE=y + CONFIG_ARCH_BERLIN=y + CONFIG_MACH_BERLIN_BG2=y +--- a/arch/arm/mach-bcm/Kconfig ++++ b/arch/arm/mach-bcm/Kconfig +@@ -32,6 +32,32 @@ config ARCH_BCM_MOBILE + BCM11130, BCM11140, BCM11351, BCM28145 and + BCM28155 variants. + ++config ARCH_BCM_5301X ++ bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7 ++ depends on MMU ++ select ARM_GIC ++ select CACHE_L2X0 ++ select HAVE_ARM_SCU if SMP ++ select HAVE_ARM_TWD if SMP ++ select HAVE_SMP ++ select COMMON_CLK ++ select GENERIC_CLOCKEVENTS ++ select ARM_GLOBAL_TIMER ++ select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK ++ select MIGHT_HAVE_PCI ++ help ++ Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores. ++ ++ This is a network SoC line mostly used in home routers and ++ wifi access points, it's internal name is Northstar. ++ This inclused the following SoC: BCM53010, BCM53011, BCM53012, ++ BCM53014, BCM53015, BCM53016, BCM53017, BCM53018, BCM4707, ++ BCM4708 and BCM4709. ++ ++ Do not confuse this with the BCM4760 which is a totally ++ different SoC or with the older BCM47XX and BCM53XX based ++ network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx ++ + endmenu + + endif +--- a/arch/arm/mach-bcm/Makefile ++++ b/arch/arm/mach-bcm/Makefile +@@ -13,3 +13,4 @@ + obj-$(CONFIG_ARCH_BCM_MOBILE) := board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o + plus_sec := $(call as-instr,.arch_extension sec,+sec) + AFLAGS_bcm_kona_smc_asm.o :=-Wa,-march=armv7-a$(plus_sec) ++obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o +--- /dev/null ++++ b/arch/arm/mach-bcm/bcm_5301x.c +@@ -0,0 +1,28 @@ ++/* ++ * Broadcom BCM470X / BCM5301X ARM platform code. ++ * ++ * Copyright 2013 Hauke Mehrtens ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++#include ++#include ++ ++#include ++ ++ ++static void __init bcm5301x_dt_init(void) ++{ ++ l2x0_of_init(0, ~0UL); ++ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); ++} ++ ++static const char __initconst *bcm5301x_dt_compat[] = { ++ "brcm,bcm4708", ++ NULL, ++}; ++ ++DT_MACHINE_START(BCM5301X, "BCM5301X") ++ .init_machine = bcm5301x_dt_init, ++ .dt_compat = bcm5301x_dt_compat, ++MACHINE_END diff --git a/target/linux/bcm53xx/patches-3.14/041-ARM-BCM5301X-add-early-debugging-support.patch b/target/linux/bcm53xx/patches-3.14/041-ARM-BCM5301X-add-early-debugging-support.patch new file mode 100644 index 0000000000..2e028a8dc3 --- /dev/null +++ b/target/linux/bcm53xx/patches-3.14/041-ARM-BCM5301X-add-early-debugging-support.patch @@ -0,0 +1,45 @@ +From 065802756b20d878c83290c115f212fc1631cba7 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Tue, 4 Feb 2014 00:01:44 +0100 +Subject: [PATCH 2/3] ARM: BCM5301X: add early debugging support + +This adds support for early debugging of BCM5301X SoC. + +Signed-off-by: Hauke Mehrtens +Acked-by: Arnd Bergmann +Acked-by: Christian Daudt +Signed-off-by: Matt Porter +--- + arch/arm/Kconfig.debug | 7 +++++++ + 1 file changed, 7 insertions(+) + +--- a/arch/arm/Kconfig.debug ++++ b/arch/arm/Kconfig.debug +@@ -106,6 +106,11 @@ choice + depends on ARCH_BCM2835 + select DEBUG_UART_PL01X + ++ config DEBUG_BCM_5301X ++ bool "Kernel low-level debugging on BCM5301X UART1" ++ depends on ARCH_BCM_5301X ++ select DEBUG_UART_PL01X ++ + config DEBUG_BCM_KONA_UART + bool "Kernel low-level debugging messages via BCM KONA UART" + depends on ARCH_BCM +@@ -1023,6 +1028,7 @@ config DEBUG_UART_PHYS + default 0x101f1000 if ARCH_VERSATILE + default 0x101fb000 if DEBUG_NOMADIK_UART + default 0x16000000 if ARCH_INTEGRATOR ++ default 0x18000300 if DEBUG_BCM_5301X + default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 + default 0x20060000 if DEBUG_RK29_UART0 + default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 +@@ -1071,6 +1077,7 @@ config DEBUG_UART_VIRT + default 0xf0009000 if DEBUG_CNS3XXX + default 0xf01fb000 if DEBUG_NOMADIK_UART + default 0xf0201000 if DEBUG_BCM2835 ++ default 0xf1000300 if DEBUG_BCM_5301X + default 0xf11f1000 if ARCH_VERSATILE + default 0xf1600000 if ARCH_INTEGRATOR + default 0xf1c28000 if DEBUG_SUNXI_UART0 diff --git a/target/linux/bcm53xx/patches-3.14/042-ARM-BCM5301X-workaround-suppress-fault.patch b/target/linux/bcm53xx/patches-3.14/042-ARM-BCM5301X-workaround-suppress-fault.patch new file mode 100644 index 0000000000..41a9dd1ac2 --- /dev/null +++ b/target/linux/bcm53xx/patches-3.14/042-ARM-BCM5301X-workaround-suppress-fault.patch @@ -0,0 +1,93 @@ +From fdf4850cb5b2e5e549a18b8b41abb001bfb19e9c Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Tue, 4 Feb 2014 00:01:46 +0100 +Subject: [PATCH 3/3] ARM: BCM5301X: workaround suppress fault + +Without this patch I am getting a unhandled fault exception like this +one after "Freeing unused kernel memory": + +Freeing unused kernel memory: 1260K (c02c1000 - c03fc000) +Unhandled fault: imprecise external abort (0x1c06) at 0xb6f89005 +Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 + +The address which is here 0xb6f89005 changes from boot to boot, with a +new build the changes are bigger. With kernel 3.10 I have also seen +this fault at different places in the boot process, but starting with +3.11 they are always occurring after the "Freeing unused kernel memory" +message. I never was able to completely boot to userspace without this +handler. The abort code is constant 0x1c06. This fault just happens +once in the boot process I have never seen it happing twice or more. + +I also tried changing the CPSR.A bit to 0 in init_early, with this code +like Afzal suggested, but that did not change anything: +asm volatile("mrs r12, cpsr\n" + "bic r12, r12, #0x00000100\n" + "msr cpsr_c, r12" ::: "r12", "cc", "memory"); + +Disabling the L2 cache by building with CONFIG_CACHE_L2X0 unset did not +help. + +This workaround was copied from the vendor code including most of the +comments. It says it they think this is caused by the CFE boot loader +used on this device. I do not have any access to any datasheet or +errata document to check this. + +Signed-off-by: Hauke Mehrtens +Acked-by: Arnd Bergmann +Acked-by: Christian Daudt +Signed-off-by: Matt Porter +--- + arch/arm/mach-bcm/bcm_5301x.c | 33 +++++++++++++++++++++++++++++++++ + 1 file changed, 33 insertions(+) + +--- a/arch/arm/mach-bcm/bcm_5301x.c ++++ b/arch/arm/mach-bcm/bcm_5301x.c +@@ -9,8 +9,40 @@ + #include + + #include ++#include ++#include + + ++static bool first_fault = true; ++ ++static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr, ++ struct pt_regs *regs) ++{ ++ if (fsr == 0x1c06 && first_fault) { ++ first_fault = false; ++ ++ /* ++ * These faults with code 0x1c06 happens for no good reason, ++ * possibly left over from the CFE boot loader. ++ */ ++ pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n", ++ addr, fsr); ++ ++ /* Returning non-zero causes fault display and panic */ ++ return 0; ++ } ++ ++ /* Others should cause a fault */ ++ return 1; ++} ++ ++static void __init bcm5301x_init_early(void) ++{ ++ /* Install our hook */ ++ hook_fault_code(16 + 6, bcm5301x_abort_handler, SIGBUS, BUS_OBJERR, ++ "imprecise external abort"); ++} ++ + static void __init bcm5301x_dt_init(void) + { + l2x0_of_init(0, ~0UL); +@@ -23,6 +55,7 @@ static const char __initconst *bcm5301x_ + }; + + DT_MACHINE_START(BCM5301X, "BCM5301X") ++ .init_early = bcm5301x_init_early, + .init_machine = bcm5301x_dt_init, + .dt_compat = bcm5301x_dt_compat, + MACHINE_END diff --git a/target/linux/bcm53xx/patches-3.14/050-ARM-BCM5301X-add-dts-files-for-BCM4708-SoC.patch b/target/linux/bcm53xx/patches-3.14/050-ARM-BCM5301X-add-dts-files-for-BCM4708-SoC.patch new file mode 100644 index 0000000000..4e98ec8255 --- /dev/null +++ b/target/linux/bcm53xx/patches-3.14/050-ARM-BCM5301X-add-dts-files-for-BCM4708-SoC.patch @@ -0,0 +1,204 @@ +From d27509f19b5f93ea3425cfef782bb3c6541cd44d Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Tue, 4 Feb 2014 00:01:45 +0100 +Subject: [PATCH] ARM: BCM5301X: add dts files for BCM4708 SoC + +This uses the newly added BCM5301X SoC code. + +Signed-off-by: Hauke Mehrtens +Acked-by: Arnd Bergmann +Acked-by: Christian Daudt +Signed-off-by: Matt Porter +--- + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 35 ++++++++++ + arch/arm/boot/dts/bcm4708.dtsi | 34 ++++++++++ + arch/arm/boot/dts/bcm5301x.dtsi | 95 +++++++++++++++++++++++++++ + 4 files changed, 165 insertions(+) + create mode 100644 arch/arm/boot/dts/bcm4708-netgear-r6250.dts + create mode 100644 arch/arm/boot/dts/bcm4708.dtsi + create mode 100644 arch/arm/boot/dts/bcm5301x.dtsi + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -50,6 +50,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rp + dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm11351-brt.dtb \ + bcm28155-ap.dtb + dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb ++dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb + dtb-$(CONFIG_ARCH_BERLIN) += \ + berlin2-sony-nsz-gs7.dtb \ + berlin2cd-google-chromecast.dtb +--- /dev/null ++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +@@ -0,0 +1,35 @@ ++/* ++ * Broadcom BCM470X / BCM5301X arm platform code. ++ * DTS for Netgear R6250 V1 ++ * ++ * Copyright 2013 Hauke Mehrtens ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++/dts-v1/; ++ ++#include "bcm4708.dtsi" ++ ++/ { ++ compatible = "netgear,r6250v1", "brcm,bcm4708"; ++ model = "Netgear R6250 V1 (BCM4708)"; ++ ++ chosen { ++ bootargs = "console=ttyS0,115200"; ++ }; ++ ++ memory { ++ reg = <0x00000000 0x08000000>; ++ }; ++ ++ chipcommonA { ++ uart0: serial@0300 { ++ status = "okay"; ++ }; ++ ++ uart1: serial@0400 { ++ status = "okay"; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/bcm4708.dtsi +@@ -0,0 +1,34 @@ ++/* ++ * Broadcom BCM470X / BCM5301X ARM platform code. ++ * DTS for BCM4708 SoC. ++ * ++ * Copyright 2013-2014 Hauke Mehrtens ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcm5301x.dtsi" ++ ++/ { ++ compatible = "brcm,bcm4708"; ++ ++ cpus { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ cpu@0 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a9"; ++ next-level-cache = <&L2>; ++ reg = <0x0>; ++ }; ++ ++ cpu@1 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a9"; ++ next-level-cache = <&L2>; ++ reg = <0x1>; ++ }; ++ }; ++ ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/bcm5301x.dtsi +@@ -0,0 +1,95 @@ ++/* ++ * Broadcom BCM470X / BCM5301X ARM platform code. ++ * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015, ++ * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs ++ * ++ * Copyright 2013-2014 Hauke Mehrtens ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include ++#include ++#include "skeleton.dtsi" ++ ++/ { ++ interrupt-parent = <&gic>; ++ ++ chipcommonA { ++ compatible = "simple-bus"; ++ ranges = <0x00000000 0x18000000 0x00001000>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ uart0: serial@0300 { ++ compatible = "ns16550"; ++ reg = <0x0300 0x100>; ++ interrupts = ; ++ clock-frequency = <100000000>; ++ status = "disabled"; ++ }; ++ ++ uart1: serial@0400 { ++ compatible = "ns16550"; ++ reg = <0x0400 0x100>; ++ interrupts = ; ++ clock-frequency = <100000000>; ++ status = "disabled"; ++ }; ++ }; ++ ++ mpcore { ++ compatible = "simple-bus"; ++ ranges = <0x00000000 0x19020000 0x00003000>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ scu@0000 { ++ compatible = "arm,cortex-a9-scu"; ++ reg = <0x0000 0x100>; ++ }; ++ ++ timer@0200 { ++ compatible = "arm,cortex-a9-global-timer"; ++ reg = <0x0200 0x100>; ++ interrupts = ; ++ clocks = <&clk_periph>; ++ }; ++ ++ local-timer@0600 { ++ compatible = "arm,cortex-a9-twd-timer"; ++ reg = <0x0600 0x100>; ++ interrupts = ; ++ clocks = <&clk_periph>; ++ }; ++ ++ gic: interrupt-controller@1000 { ++ compatible = "arm,cortex-a9-gic"; ++ #interrupt-cells = <3>; ++ #address-cells = <0>; ++ interrupt-controller; ++ reg = <0x1000 0x1000>, ++ <0x0100 0x100>; ++ }; ++ ++ L2: cache-controller@2000 { ++ compatible = "arm,pl310-cache"; ++ reg = <0x2000 0x1000>; ++ cache-unified; ++ cache-level = <2>; ++ }; ++ }; ++ ++ clocks { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ /* As long as we do not have a real clock driver us this ++ * fixed clock */ ++ clk_periph: periph { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <400000000>; ++ }; ++ }; ++}; diff --git a/target/linux/bcm53xx/patches-3.14/052-bcm53xx-register-bcma-bus.patch b/target/linux/bcm53xx/patches-3.14/052-bcm53xx-register-bcma-bus.patch new file mode 100644 index 0000000000..aa2414df84 --- /dev/null +++ b/target/linux/bcm53xx/patches-3.14/052-bcm53xx-register-bcma-bus.patch @@ -0,0 +1,59 @@ +From 22b90bcf616578abe09845c72317ce53312f7faf Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Sat, 25 Jan 2014 17:03:07 +0100 +Subject: [PATCH 8/8] ARM: BCM5301X: register bcma bus + +--- + arch/arm/boot/dts/bcm4708.dtsi | 43 ++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 43 insertions(+) + +--- a/arch/arm/boot/dts/bcm4708.dtsi ++++ b/arch/arm/boot/dts/bcm4708.dtsi +@@ -31,4 +31,47 @@ + }; + }; + ++ aix@18000000 { ++ compatible = "brcm,bus-aix"; ++ reg = <0x18000000 0x1000>; ++ ranges = <0x00000000 0x18000000 0x00100000>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ usb2@0 { ++ compatible = "brcm,northstar-usb2"; ++ reg = <0x18021000 0x1000>; ++ interrupts = ; ++ }; ++ ++ usb3@0 { ++ compatible = "brcm,northstar-usb3"; ++ reg = <0x18023000 0x1000>; ++ interrupts = ; ++ }; ++ ++ gmac@0 { ++ compatible = "brcm,northstar-gmac"; ++ reg = <0x18024000 0x1000>; ++ interrupts = ; ++ }; ++ ++ gmac@1 { ++ compatible = "brcm,northstar-gmac"; ++ reg = <0x18025000 0x1000>; ++ interrupts = ; ++ }; ++ ++ gmac@2 { ++ compatible = "brcm,northstar-gmac"; ++ reg = <0x18026000 0x1000>; ++ interrupts = ; ++ }; ++ ++ gmac@3 { ++ compatible = "brcm,northstar-gmac"; ++ reg = <0x18027000 0x1000>; ++ interrupts = ; ++ }; ++ }; + }; diff --git a/target/linux/bcm53xx/patches-3.14/111-bcma-register-bcma-as-device-tree-driver.patch b/target/linux/bcm53xx/patches-3.14/111-bcma-register-bcma-as-device-tree-driver.patch new file mode 100644 index 0000000000..fe44827082 --- /dev/null +++ b/target/linux/bcm53xx/patches-3.14/111-bcma-register-bcma-as-device-tree-driver.patch @@ -0,0 +1,115 @@ +From c046c19fc8f1af7cf253fea5b0253143c159948a Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Mon, 6 Jan 2014 23:29:15 +0100 +Subject: [PATCH 6/8] bcma: register bcma as device tree driver + +This driver is used by the bcm53xx ARM SoC code.Now it is possible to +give the address of the chipcommon core in device tree. + +Signed-off-by: Hauke Mehrtens +--- + drivers/bcma/host_soc.c | 70 +++++++++++++++++++++++++++++++++++++++++++++ + include/linux/bcma/bcma.h | 2 ++ + 2 files changed, 72 insertions(+) + +--- a/drivers/bcma/host_soc.c ++++ b/drivers/bcma/host_soc.c +@@ -7,6 +7,9 @@ + + #include "bcma_private.h" + #include "scan.h" ++#include ++#include ++#include + #include + #include + +@@ -173,6 +176,7 @@ int __init bcma_host_soc_register(struct + /* Host specific */ + bus->hosttype = BCMA_HOSTTYPE_SOC; + bus->ops = &bcma_host_soc_ops; ++ bus->host_pdev = NULL; + + /* Register */ + err = bcma_bus_early_register(bus, &soc->core_cc, &soc->core_mips); +@@ -181,3 +185,69 @@ int __init bcma_host_soc_register(struct + + return err; + } ++ ++#ifdef CONFIG_OF ++static int bcma_host_soc_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct device_node *np = dev->of_node; ++ struct bcma_bus *bus; ++ int err; ++ ++ /* Alloc */ ++ bus = devm_kzalloc(dev, sizeof(*bus), GFP_KERNEL); ++ if (!bus) ++ return -ENOMEM; ++ ++ /* Map MMIO */ ++ bus->mmio = of_iomap(np, 0); ++ if (!bus->mmio) ++ return -ENOMEM; ++ ++ /* Host specific */ ++ bus->hosttype = BCMA_HOSTTYPE_SOC; ++ bus->ops = &bcma_host_soc_ops; ++ bus->host_pdev = pdev; ++ ++ /* Register */ ++ err = bcma_bus_register(bus); ++ if (err) ++ goto err_unmap_mmio; ++ ++ platform_set_drvdata(pdev, bus); ++ ++ return err; ++ ++err_unmap_mmio: ++ iounmap(bus->mmio); ++ return err; ++} ++ ++static int bcma_host_soc_remove(struct platform_device *pdev) ++{ ++ struct bcma_bus *bus = platform_get_drvdata(pdev); ++ ++ bcma_bus_unregister(bus); ++ iounmap(bus->mmio); ++ platform_set_drvdata(pdev, NULL); ++ ++ return 0; ++} ++ ++static const struct of_device_id bcma_host_soc_of_match[] = { ++ { .compatible = "brcm,bus-aix", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, bcma_host_soc_of_match); ++ ++static struct platform_driver bcma_host_soc_driver = { ++ .driver = { ++ .name = "bcma-host-soc", ++ .owner = THIS_MODULE, ++ .of_match_table = bcma_host_soc_of_match, ++ }, ++ .probe = bcma_host_soc_probe, ++ .remove = bcma_host_soc_remove, ++}; ++module_platform_driver(bcma_host_soc_driver); ++#endif /* CONFIG_OF */ +--- a/include/linux/bcma/bcma.h ++++ b/include/linux/bcma/bcma.h +@@ -319,6 +319,8 @@ struct bcma_bus { + struct pci_dev *host_pci; + /* Pointer to the SDIO device (only for BCMA_HOSTTYPE_SDIO) */ + struct sdio_func *host_sdio; ++ /* Pointer to platform device (only for BCMA_HOSTTYPE_SOC) */ ++ struct platform_device *host_pdev; + }; + + struct bcma_chipinfo chipinfo; diff --git a/target/linux/bcm53xx/patches-3.14/112-bcma-get-irqs-from-dt.patch b/target/linux/bcm53xx/patches-3.14/112-bcma-get-irqs-from-dt.patch new file mode 100644 index 0000000000..89faea227f --- /dev/null +++ b/target/linux/bcm53xx/patches-3.14/112-bcma-get-irqs-from-dt.patch @@ -0,0 +1,74 @@ +From 06a21484198df9a4d34fe5062878d3bf4fc14340 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Thu, 9 Jan 2014 19:40:14 +0100 +Subject: [PATCH 7/8] bcma: get irqs from dt + +--- + drivers/bcma/main.c | 42 +++++++++++++++++++++++++++++++++++++++++- + 1 file changed, 41 insertions(+), 1 deletion(-) + +--- a/drivers/bcma/main.c ++++ b/drivers/bcma/main.c +@@ -10,6 +10,8 @@ + #include + #include + #include ++#include ++#include + + MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); + MODULE_LICENSE("GPL"); +@@ -120,6 +122,38 @@ static void bcma_release_core_dev(struct + kfree(core); + } + ++static struct device_node *bcma_of_find_child_device(struct platform_device *parent, ++ struct bcma_device *core) ++{ ++ struct device_node *node; ++ u64 size; ++ const __be32 *reg; ++ ++ if (!parent || !parent->dev.of_node) ++ return NULL; ++ ++ for_each_child_of_node(parent->dev.of_node, node) { ++ reg = of_get_address(node, 0, &size, 0); ++ if (!reg) ++ continue; ++ if (be32_to_cpup(reg) == core->addr) ++ return node; ++ } ++ return NULL; ++} ++ ++static void bcma_of_fill_device(struct platform_device *parent, ++ struct bcma_device *core) ++{ ++ struct device_node *node; ++ ++ node = bcma_of_find_child_device(parent, core); ++ if (!node) ++ return; ++ core->dev.of_node = node; ++ core->irq = irq_of_parse_and_map(node, 0); ++} ++ + static int bcma_register_cores(struct bcma_bus *bus) + { + struct bcma_device *core; +@@ -154,7 +188,13 @@ static int bcma_register_cores(struct bc + break; + case BCMA_HOSTTYPE_SOC: + core->dev.dma_mask = &core->dev.coherent_dma_mask; +- core->dma_dev = &core->dev; ++ if (bus->host_pdev) { ++ core->dma_dev = &bus->host_pdev->dev; ++ core->dev.parent = &bus->host_pdev->dev; ++ bcma_of_fill_device(bus->host_pdev, core); ++ } else { ++ core->dma_dev = &core->dev; ++ } + break; + case BCMA_HOSTTYPE_SDIO: + break; diff --git a/target/linux/bcm53xx/patches-3.14/202-bgmac-make-bgmac-work-on-systems-without-nvram.patch b/target/linux/bcm53xx/patches-3.14/202-bgmac-make-bgmac-work-on-systems-without-nvram.patch new file mode 100644 index 0000000000..1cf4641fa6 --- /dev/null +++ b/target/linux/bcm53xx/patches-3.14/202-bgmac-make-bgmac-work-on-systems-without-nvram.patch @@ -0,0 +1,73 @@ +These are some hackish patches to make the Ethernet driver work somehow +on this arm core. +The flash driver is not working, so we removed the nvram reading, this +should be changed after we have a flash driver. +The mdelay(1) is a ugly workaround for this arm chip, this seams to be a dma problem. + +The PHY says it is not connected by default, just ignore it. + +--- a/drivers/net/ethernet/broadcom/Kconfig ++++ b/drivers/net/ethernet/broadcom/Kconfig +@@ -131,7 +131,7 @@ config BNX2X_SRIOV + + config BGMAC + tristate "BCMA bus GBit core support" +- depends on BCMA_HOST_SOC && HAS_DMA && BCM47XX ++ depends on BCMA_HOST_SOC && HAS_DMA + select PHYLIB + ---help--- + This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus. +--- a/drivers/net/ethernet/broadcom/bgmac.c ++++ b/drivers/net/ethernet/broadcom/bgmac.c +@@ -17,7 +17,11 @@ + #include + #include + #include ++#ifdef CONFIG_BCM47XX + #include ++#else ++#define bcm47xx_nvram_getenv(a, b, c) -1 ++#endif + + static const struct bcma_device_id bgmac_bcma_tbl[] = { + BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_4706_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS), +@@ -1452,7 +1456,7 @@ static int bgmac_probe(struct bcma_devic + int err; + + /* We don't support 2nd, 3rd, ... units, SPROM has to be adjusted */ +- if (core->core_unit > 1) { ++ if (core->core_unit > 0) { + pr_err("Unsupported core_unit %d\n", core->core_unit); + return -ENOTSUPP; + } +@@ -1487,8 +1491,7 @@ static int bgmac_probe(struct bcma_devic + } + bgmac->cmn = core->bus->drv_gmac_cmn.core; + +- bgmac->phyaddr = core->core_unit ? sprom->et1phyaddr : +- sprom->et0phyaddr; ++ bgmac->phyaddr = BGMAC_PHY_NOREGS; // core->core_unit ? sprom->et1phyaddr : sprom->et0phyaddr; + bgmac->phyaddr &= BGMAC_PHY_MASK; + if (bgmac->phyaddr == BGMAC_PHY_MASK) { + bgmac_err(bgmac, "No PHY found\n"); +@@ -1540,8 +1543,7 @@ static int bgmac_probe(struct bcma_devic + /* TODO: reset the external phy. Specs are needed */ + bgmac_phy_reset(bgmac); + +- bgmac->has_robosw = !!(core->bus->sprom.boardflags_lo & +- BGMAC_BFL_ENETROBO); ++ bgmac->has_robosw = 1; + if (bgmac->has_robosw) + bgmac_warn(bgmac, "Support for Roboswitch not implemented\n"); + +--- a/drivers/net/phy/phy_device.c ++++ b/drivers/net/phy/phy_device.c +@@ -898,7 +898,7 @@ int genphy_update_link(struct phy_device + return status; + + if ((status & BMSR_LSTATUS) == 0) +- phydev->link = 0; ++ phydev->link = 1; + else + phydev->link = 1; + -- cgit v1.2.3