update from oPENWRT forum, need author

Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>

4 files changed, 57 insertions, 10 deletions

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 8bc3d0cda7..d527fdb1ae 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -74,6 +74,12 @@ bc2)
 br-6425)
 	set_wifi_led "$board:orange:wlan"
 	;;
+br-6478ac-v2)
+	ucidef_set_led_default "power" "POWER" "$board:white:power" "1"
+	ucidef_set_led_default "wan" "WAN LED" "$board:blue:wan" "1"
+	set_wifi_led "$board:blue:wlan"
+	set_usb_led "$board:blue:usb"
+	;;
 broadway)
 	set_usb_led "$board:red:diskmounted"
 	set_wifi_led "$board:red:wps_active"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 084c82ba1b..cc03087201 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -162,6 +162,14 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
 		;;
+
+    br-6478ac-v2)
+	//    ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+		ucidef_set_interface_lan "eth0.1"
+		ucidef_add_switch "switch1" \
+			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
+		;;
+
 	cf-wr800n|\
 	ex2700)
 		ucidef_add_switch "switch0" \
@@ -294,6 +302,11 @@ ramips_setup_macs()
 		lan_mac=$(cat /sys/class/net/eth0/address)
 		wan_mac=$(mtd_get_mac_binary devdata 7)
 		;;
+    br-6478ac-v2)
+		lan_mac=$(cat /sys/class/net/eth0/address)
+		wan_mac=$(cat /sys/class/net/eth0.2/address)
+		//wan_mac=$(mtd_get_mac_binary devdata 7)
+		;;
 	cy-swr1100|\
 	dch-m225)
 		lan_mac=$(mtd_get_mac_ascii factory lanmac)
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 7870ce2ffb..07a35a79dc 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -35,6 +35,9 @@ get_status_led() {
 	xdxrn502j)
 		status_led="$board:green:power"
 		;;
+    br-6478ac-v2)
+		status_led="$board:white:power"
+		;;
 	a5-v11|\
 	cs-qr10|\
 	d105|\
diff --git a/target/linux/ramips/dts/BR-6478AC-V2.dts b/target/linux/ramips/dts/BR-6478AC-V2.dts
index 0951b5aac0..b32a7df024 100644
--- a/target/linux/ramips/dts/BR-6478AC-V2.dts
+++ b/target/linux/ramips/dts/BR-6478AC-V2.dts
@@ -18,10 +18,16 @@
 	model = "Edimax BR-6478ACV2";
 
 	chosen {
-                bootargs = "console=ttyS0,57600";
+			bootargs = "console=ttyS0,57600";
 	};
 
 	palmbus@10000000 {
+		gpio1: gpio@638 {
+			satus = "okay";
+		};
+		gpio2: gpio@660 {
+			status = "okay";
+		};
 			spi@b00 {
 			status = "okay";
 
@@ -74,6 +80,14 @@
 		};
 	};
 
+	usbphy: usbphy {
+		compatible = "mediatek,mt7620-usbphy";
+		#phy-cells = <1>;
+		//    resets = <&rstctrl 22 &rstctrl 25>;
+		resets = <&rstctrl 22 &rstctrl 19>;
+		reset-names = "host", "device";
+	};
+ 
 	ethernet@10100000 {
 		status = "okay";
 		mtd-mac-address = <&factory 0x28>;
@@ -138,14 +152,14 @@
 
 		reset {
 			label = "reset";
-			gpios = <&gpio0 1 0>;
-			linux,code = <0x198>;
+			gpios = <&gpio0 12 1>;
+			linux,code = <0x101>;
 		};
 
 		wps {
 			label = "wps";
-			gpios = <&gpio0 2 0>;
-			linux,code = <0x211>;
+			gpios = <&gpio0 1 1>;
+			linux,code = <0x100>;
 		};
 	};
 
@@ -153,13 +167,20 @@
 		compatible = "gpio-leds";
 
 		power {
-			label = "br-6478ac-v2:green:power";
-			gpios = <&gpio0 10 1>;
+			label = "br-6478ac-v2:white:power";
+			gpios = <&gpio0 11 1>;
 		};
-
 		wan {
-			label = "br-6478ac-v2:green:wps";
-			gpios = <&gpio0 12 1>;
+			label = "br-6478ac-v2:blue:wan";
+			gpios = <&gpio0 7 1>;
+		};
+		wlan {
+            		label = "br-6478ac-v2:blue:wlan";
+			gpios = <&gpio0 10 1>;
+		};
+		usb {
+			label = "br-6478ac-v2:blue:usb";
+			gpios = <&gpio0 14 1>;
 		};
 	};
 
@@ -169,10 +190,14 @@
 
 	ehci@101c0000 {
 		status = "okay";
+		interrupt-parent = <&intc>;
+		interrupts = <18>;
 	};
 
 	ohci@101c1000 {
 		status = "okay";
+		interrupt-parent = <&intc>;
+		interrupts = <18>;
 	};
 };