From f9d8537c6be1ccb0a22ec8383ac45e0033a8517e Mon Sep 17 00:00:00 2001 From: Reuben Thomas Date: Sun, 20 Jul 2014 00:03:07 +0100 Subject: Move INSTALL into README and update --- INSTALL | 70 ----------------------------------------------------------------- 1 file changed, 70 deletions(-) delete mode 100644 INSTALL (limited to 'INSTALL') diff --git a/INSTALL b/INSTALL deleted file mode 100644 index 1f0ed93..0000000 --- a/INSTALL +++ /dev/null @@ -1,70 +0,0 @@ -Installation instructions for plptools --------------------------------------- - -Prerequisites -------------- - -To build plpfuse, the following packages are required: - - FUSE: http://fuse.sourceforge.net/ - libattr: ftp://oss.sgi.com/projects/xfs/download/ - -These packages come with most Linux distributions. To build plptools, -the development packages (typically ending in -dev or -devel) must be -installed. If they are not installed, plpfuse will not be built, but -the rest of plptools will still work. - - -Installation ------------- - -plptools uses GNU autotools, so the usual sequence of commands works: - -./configure -make -make install - -In addition to the usual options, configure understands the following: - - --enable-debug - - builds debugging versions of the programs and libplp - - --with-serial=/dev/sometty - - sets the default serial device for ncpd. Without this option, - ncpd tries automagically to find a serial device. - - --with-speed=baudrate - - sets the default serial speed (normally 115200 baud). - - --with-port=portnum - - sets the default port on which ncpd listens and to which plpftp - and plpfuse connect (default 7501). - - --with-drive=drivespec - - sets the default drive for plpftp. The default "AUTO" - triggers a drive-scan on the psion and sets the drive to the - first drive found. If you don't want that, specify "C:" for - example. - - --with-basedir=dirspec - - overrides the default directory for plpftp. The default is \ - which means the root directory. Note: since backslashes need to - be doubled once for C escaping and once for shell escaping, - this value is actually supplied as "\\\\". - - -Information for developers --------------------------- - -To build from git, you will first need to run - - autoreconf -i - -To make a release automatically, you need woger, from -http://rrt.sc3d.org/Software/woger -- cgit v1.2.3