diff options
Diffstat (limited to 'libopencm3/scripts/data')
21 files changed, 25993 insertions, 0 deletions
diff --git a/libopencm3/scripts/data/lpc43xx/README b/libopencm3/scripts/data/lpc43xx/README new file mode 100644 index 0000000..b768936 --- /dev/null +++ b/libopencm3/scripts/data/lpc43xx/README @@ -0,0 +1,23 @@ +These files contain information derived from the LPC43xx user manual (UM10503). +They are intended to be used by scripts for the generation of header files and +functions. + +Each line describes a field within a register. The comma separated values are: + register name (as found in include/lpc43xx/*.h), + bit position, + length in bits, + field name, + description/comment (may be empty if not specified in data sheet), + reset value (may be empty if not specified in data sheet), + access (may be empty if not specified in data sheet) + +The access field may consist of any of the following codes: + r: read only + rw: read/write + rwc: read/write one to clear + rwo: read/write once + rws: read/write one to set + w: write only + ws: write one to set + +Descriptions containing commas are quoted. diff --git a/libopencm3/scripts/data/lpc43xx/adc.yaml b/libopencm3/scripts/data/lpc43xx/adc.yaml new file mode 100644 index 0000000..9256e2a --- /dev/null +++ b/libopencm3/scripts/data/lpc43xx/adc.yaml @@ -0,0 +1,607 @@ +!!omap +- ADC0_CR: + fields: !!omap + - SEL: + access: rw + description: Selects which of the ADCn_[7:0] inputs are to be sampled and + converted + lsb: 0 + reset_value: '0' + width: 8 + - CLKDIV: + access: rw + description: The ADC clock is divided by the CLKDIV value plus one to produce + the clock for the A/D converter + lsb: 8 + reset_value: '0' + width: 8 + - BURST: + access: rw + description: Controls Burst mode + lsb: 16 + reset_value: '0' + width: 1 + - CLKS: + access: rw + description: This field selects the number of clocks used for each conversion + in Burst mode and the number of bits of accuracy of the result in the LS + bits of ADDR, between 11 clocks (10 bits) and 4 clocks (3 bits). + lsb: 17 + reset_value: '0' + width: 3 + - PDN: + access: rw + description: Power mode + lsb: 21 + reset_value: '0' + width: 1 + - START: + access: rw + description: Controls the start of an A/D conversion when the BURST bit is + 0 + lsb: 24 + reset_value: '0' + width: 3 + - EDGE: + access: rw + description: Controls rising or falling edge on the selected signal for the + start of a conversion + lsb: 27 + reset_value: '0' + width: 1 +- ADC1_CR: + fields: !!omap + - SEL: + access: rw + description: Selects which of the ADCn_[7:0] inputs are to be sampled and + converted + lsb: 0 + reset_value: '0' + width: 8 + - CLKDIV: + access: rw + description: The ADC clock is divided by the CLKDIV value plus one to produce + the clock for the A/D converter + lsb: 8 + reset_value: '0' + width: 8 + - BURST: + access: rw + description: Controls Burst mode + lsb: 16 + reset_value: '0' + width: 1 + - CLKS: + access: rw + description: This field selects the number of clocks used for each conversion + in Burst mode and the number of bits of accuracy of the result in the LS + bits of ADDR, between 11 clocks (10 bits) and 4 clocks (3 bits). + lsb: 17 + reset_value: '0' + width: 3 + - PDN: + access: rw + description: Power mode + lsb: 21 + reset_value: '0' + width: 1 + - START: + access: rw + description: Controls the start of an A/D conversion when the BURST bit is + 0 + lsb: 24 + reset_value: '0' + width: 3 + - EDGE: + access: rw + description: Controls rising or falling edge on the selected signal for the + start of a conversion + lsb: 27 + reset_value: '0' + width: 1 +- ADC0_GDR: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADCn pin selected by the SEL field, divided by the reference + voltage on the VDDA pin + lsb: 6 + reset_value: '0' + width: 10 + - CHN: + access: r + description: These bits contain the channel from which the LS bits were converted + lsb: 24 + reset_value: '0' + width: 3 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an analog-to-digital conversion completes. + It is cleared when this register is read and when the AD0/1CR register is + written + lsb: 31 + reset_value: '0' + width: 1 +- ADC1_GDR: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADCn pin selected by the SEL field, divided by the reference + voltage on the VDDA pin + lsb: 6 + reset_value: '0' + width: 10 + - CHN: + access: r + description: These bits contain the channel from which the LS bits were converted + lsb: 24 + reset_value: '0' + width: 3 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an analog-to-digital conversion completes. + It is cleared when this register is read and when the AD0/1CR register is + written + lsb: 31 + reset_value: '0' + width: 1 +- ADC0_INTEN: + fields: !!omap + - ADINTEN: + access: rw + description: These bits allow control over which A/D channels generate interrupts + for conversion completion + lsb: 0 + reset_value: '0' + width: 8 + - ADGINTEN: + access: rw + description: When 1, enables the global DONE flag in ADDR to generate an interrupt. + When 0, only the individual A/D channels enabled by ADINTEN 7:0 will generate + interrupts. + lsb: 8 + reset_value: '1' + width: 1 +- ADC1_INTEN: + fields: !!omap + - ADINTEN: + access: rw + description: These bits allow control over which A/D channels generate interrupts + for conversion completion + lsb: 0 + reset_value: '0' + width: 8 + - ADGINTEN: + access: rw + description: When 1, enables the global DONE flag in ADDR to generate an interrupt. + When 0, only the individual A/D channels enabled by ADINTEN 7:0 will generate + interrupts. + lsb: 8 + reset_value: '1' + width: 1 +- ADC0_DR0: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC0 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC1_DR0: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC0 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC0_DR1: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC1 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC1_DR1: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC1 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC0_DR2: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC2 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC1_DR2: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC2 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC0_DR3: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC3 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC1_DR3: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC3 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC0_DR4: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC4 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC1_DR4: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC4 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC0_DR5: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC5 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC1_DR5: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC5 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC0_DR6: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC6 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC1_DR6: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC6 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC0_DR7: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC7 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC1_DR7: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC7 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC0_STAT: + fields: !!omap + - DONE: + access: r + description: These bits mirror the DONE status flags that appear in the result + register for each A/D channel. + lsb: 0 + reset_value: '0' + width: 8 + - OVERRUN: + access: r + description: These bits mirror the OVERRRUN status flags that appear in the + result register for each A/D channel. + lsb: 8 + reset_value: '0' + width: 8 + - ADINT: + access: r + description: This bit is the A/D interrupt flag. It is one when any of the + individual A/D channel Done flags is asserted and enabled to contribute + to the A/D interrupt via the ADINTEN register. + lsb: 16 + reset_value: '0' + width: 1 diff --git a/libopencm3/scripts/data/lpc43xx/atimer.yaml b/libopencm3/scripts/data/lpc43xx/atimer.yaml new file mode 100644 index 0000000..010a25d --- /dev/null +++ b/libopencm3/scripts/data/lpc43xx/atimer.yaml @@ -0,0 +1,71 @@ +!!omap +- ATIMER_DOWNCOUNTER: + fields: !!omap + - CVAL: + access: rw + description: When equal to zero an interrupt is raised + lsb: 0 + reset_value: '0' + width: 16 +- ATIMER_PRESET: + fields: !!omap + - PRESETVAL: + access: rw + description: Value loaded in DOWNCOUNTER when DOWNCOUNTER equals zero + lsb: 0 + reset_value: '0' + width: 16 +- ATIMER_CLR_EN: + fields: !!omap + - CLR_EN: + access: w + description: Writing a 1 to this bit clears the interrupt enable bit in the + ENABLE register + lsb: 0 + reset_value: '0' + width: 1 +- ATIMER_SET_EN: + fields: !!omap + - SET_EN: + access: w + description: Writing a 1 to this bit sets the interrupt enable bit in the + ENABLE register + lsb: 0 + reset_value: '0' + width: 1 +- ATIMER_STATUS: + fields: !!omap + - STAT: + access: r + description: A 1 in this bit shows that the STATUS interrupt has been raised + lsb: 0 + reset_value: '0' + width: 1 +- ATIMER_ENABLE: + fields: !!omap + - ENA: + access: r + description: A 1 in this bit shows that the STATUS interrupt has been enabled + and that the STATUS interrupt request signal is asserted when STAT = 1 in + the STATUS register + lsb: 0 + reset_value: '0' + width: 1 +- ATIMER_CLR_STAT: + fields: !!omap + - CSTAT: + access: w + description: Writing a 1 to this bit clears the STATUS interrupt bit in the + STATUS register + lsb: 0 + reset_value: '0' + width: 1 +- ATIMER_SET_STAT: + fields: !!omap + - SSTAT: + access: w + description: Writing a 1 to this bit sets the STATUS interrupt bit in the + STATUS register + lsb: 0 + reset_value: '0' + width: 1 diff --git a/libopencm3/scripts/data/lpc43xx/ccu.yaml b/libopencm3/scripts/data/lpc43xx/ccu.yaml new file mode 100644 index 0000000..b2d225f --- /dev/null +++ b/libopencm3/scripts/data/lpc43xx/ccu.yaml @@ -0,0 +1,2391 @@ +!!omap +- CCU1_PM: + fields: !!omap + - PD: + access: rw + description: Initiate power-down mode + lsb: 0 + reset_value: '0' + width: 1 +- CCU1_BASE_STAT: + fields: !!omap + - BASE_APB3_CLK_IND: + access: r + description: Base clock indicator for BASE_APB3_CLK + lsb: 0 + reset_value: '1' + width: 1 + - BASE_APB1_CLK_IND: + access: r + description: Base clock indicator for BASE_APB1_CLK + lsb: 1 + reset_value: '1' + width: 1 + - BASE_SPIFI_CLK_IND: + access: r + description: Base clock indicator for BASE_SPIFI_CLK + lsb: 2 + reset_value: '1' + width: 1 + - BASE_M4_CLK_IND: + access: r + description: Base clock indicator for BASE_M4_CLK + lsb: 3 + reset_value: '1' + width: 1 + - BASE_PERIPH_CLK_IND: + access: r + description: Base clock indicator for BASE_PERIPH_CLK + lsb: 6 + reset_value: '1' + width: 1 + - BASE_USB0_CLK_IND: + access: r + description: Base clock indicator for BASE_USB0_CLK + lsb: 7 + reset_value: '1' + width: 1 + - BASE_USB1_CLK_IND: + access: r + description: Base clock indicator for BASE_USB1_CLK + lsb: 8 + reset_value: '1' + width: 1 + - BASE_SPI_CLK_IND: + access: r + description: Base clock indicator for BASE_SPI_CLK + lsb: 9 + reset_value: '1' + width: 1 +- CCU1_CLK_APB3_BUS_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_APB3_BUS_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_APB3_I2C1_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_APB3_I2C1_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_APB3_DAC_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_APB3_DAC_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_APB3_ADC0_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_APB3_ADC0_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_APB3_ADC1_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_APB3_ADC1_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_APB3_CAN0_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_APB3_CAN0_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_APB1_BUS_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_APB1_BUS_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_APB1_MOTOCONPWM_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_APB1_MOTOCONPWM_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_APB1_I2C0_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_APB1_I2C0_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_APB1_I2S_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_APB1_I2S_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_APB1_CAN1_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_APB1_CAN1_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_SPIFI_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_SPIFI_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_BUS_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_BUS_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_SPIFI_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_SPIFI_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_GPIO_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_GPIO_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_LCD_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_LCD_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_ETHERNET_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_ETHERNET_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_USB0_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_USB0_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_EMC_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_EMC_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_SDIO_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_SDIO_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_DMA_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_DMA_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_M4CORE_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_M4CORE_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_SCT_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_SCT_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_USB1_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_USB1_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_EMCDIV_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 + - DIV: + access: rw + description: Clock divider value + lsb: 5 + reset_value: '0' + width: 3 +- CCU1_CLK_M4_EMCDIV_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_M0APP_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_M0APP_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_VADC_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_VADC_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_WWDT_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_WWDT_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_USART0_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_USART0_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_UART1_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_UART1_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_SSP0_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_SSP0_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_TIMER0_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_TIMER0_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_TIMER1_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_TIMER1_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_SCU_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_SCU_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_CREG_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_CREG_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_RITIMER_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_RITIMER_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_USART2_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_USART2_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_USART3_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_USART3_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_TIMER2_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_TIMER2_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_TIMER3_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_TIMER3_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_SSP1_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_SSP1_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_QEI_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_M4_QEI_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_PERIPH_BUS_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_PERIPH_BUS_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_PERIPH_CORE_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_PERIPH_CORE_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_PERIPH_SGPIO_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_PERIPH_SGPIO_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_USB0_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_USB0_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_USB1_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_USB1_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_SPI_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_SPI_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_VADC_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU1_CLK_VADC_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU2_PM: + fields: !!omap + - PD: + access: rw + description: Initiate power-down mode + lsb: 0 + reset_value: '0' + width: 1 +- CCU2_BASE_STAT: + fields: !!omap + - BASE_UART3_CLK_IND: + access: r + description: Base clock indicator for BASE_UART3_CLK + lsb: 1 + reset_value: '1' + width: 1 + - BASE_UART2_CLK_IND: + access: r + description: Base clock indicator for BASE_UART2_CLK + lsb: 2 + reset_value: '1' + width: 1 + - BASE_UART1_CLK_IND: + access: r + description: Base clock indicator for BASE_UART1_CLK + lsb: 3 + reset_value: '1' + width: 1 + - BASE_UART0_CLK_IND: + access: r + description: Base clock indicator for BASE_UART0_CLK + lsb: 4 + reset_value: '1' + width: 1 + - BASE_SSP1_CLK_IND: + access: r + description: Base clock indicator for BASE_SSP1_CLK + lsb: 5 + reset_value: '1' + width: 1 + - BASE_SSP0_CLK_IND: + access: r + description: Base clock indicator for BASE_SSP0_CLK + lsb: 6 + reset_value: '1' + width: 1 +- CCU2_CLK_APLL_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU2_CLK_APLL_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU2_CLK_APB2_USART3_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU2_CLK_APB2_USART3_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU2_CLK_APB2_USART2_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU2_CLK_APB2_USART2_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU2_CLK_APB0_UART1_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU2_CLK_APB0_UART1_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU2_CLK_APB0_USART0_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU2_CLK_APB0_USART0_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU2_CLK_APB2_SSP1_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU2_CLK_APB2_SSP1_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU2_CLK_APB0_SSP0_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU2_CLK_APB0_SSP0_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 +- CCU2_CLK_SDIO_CFG: + fields: !!omap + - RUN: + access: rw + description: Run enable + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: rw + description: Auto (AHB disable mechanism) enable + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: rw + description: Wake-up mechanism enable + lsb: 2 + reset_value: '0' + width: 1 +- CCU2_CLK_SDIO_STAT: + fields: !!omap + - RUN: + access: r + description: Run enable status + lsb: 0 + reset_value: '1' + width: 1 + - AUTO: + access: r + description: Auto (AHB disable mechanism) enable status + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP: + access: r + description: Wake-up mechanism enable status + lsb: 2 + reset_value: '0' + width: 1 diff --git a/libopencm3/scripts/data/lpc43xx/cgu.yaml b/libopencm3/scripts/data/lpc43xx/cgu.yaml new file mode 100644 index 0000000..f55b8d0 --- /dev/null +++ b/libopencm3/scripts/data/lpc43xx/cgu.yaml @@ -0,0 +1,937 @@ +!!omap +- CGU_FREQ_MON: + fields: !!omap + - RCNT: + access: rw + description: 9-bit reference clock-counter value + lsb: 0 + reset_value: '0' + width: 9 + - FCNT: + access: r + description: 14-bit selected clock-counter value + lsb: 9 + reset_value: '0' + width: 14 + - MEAS: + access: rw + description: Measure frequency + lsb: 23 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock-source selection for the clock to be measured + lsb: 24 + reset_value: '0' + width: 5 +- CGU_XTAL_OSC_CTRL: + fields: !!omap + - ENABLE: + access: rw + description: Oscillator-pad enable + lsb: 0 + reset_value: '1' + width: 1 + - BYPASS: + access: rw + description: Configure crystal operation or external-clock input pin XTAL1 + lsb: 1 + reset_value: '0' + width: 1 + - HF: + access: rw + description: Select frequency range + lsb: 2 + reset_value: '1' + width: 1 +- CGU_PLL0USB_STAT: + fields: !!omap + - LOCK: + access: r + description: PLL0 lock indicator + lsb: 0 + reset_value: '0' + width: 1 + - FR: + access: r + description: PLL0 free running indicator + lsb: 1 + reset_value: '0' + width: 1 +- CGU_PLL0USB_CTRL: + fields: !!omap + - PD: + access: rw + description: PLL0 power down + lsb: 0 + reset_value: '1' + width: 1 + - BYPASS: + access: rw + description: Input clock bypass control + lsb: 1 + reset_value: '1' + width: 1 + - DIRECTI: + access: rw + description: PLL0 direct input + lsb: 2 + reset_value: '0' + width: 1 + - DIRECTO: + access: rw + description: PLL0 direct output + lsb: 3 + reset_value: '0' + width: 1 + - CLKEN: + access: rw + description: PLL0 clock enable + lsb: 4 + reset_value: '0' + width: 1 + - FRM: + access: rw + description: Free running mode + lsb: 6 + reset_value: '0' + width: 1 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_PLL0USB_MDIV: + fields: !!omap + - MDEC: + access: rw + description: Decoded M-divider coefficient value + lsb: 0 + reset_value: '0x5B6A' + width: 17 + - SELP: + access: rw + description: Bandwidth select P value + lsb: 17 + reset_value: '0x1C' + width: 5 + - SELI: + access: rw + description: Bandwidth select I value + lsb: 22 + reset_value: '0x17' + width: 6 + - SELR: + access: rw + description: Bandwidth select R value + lsb: 28 + reset_value: '0x0' + width: 4 +- CGU_PLL0USB_NP_DIV: + fields: !!omap + - PDEC: + access: rw + description: Decoded P-divider coefficient value + lsb: 0 + reset_value: '0x02' + width: 7 + - NDEC: + access: rw + description: Decoded N-divider coefficient value + lsb: 12 + reset_value: '0xB1' + width: 10 +- CGU_PLL0AUDIO_STAT: + fields: !!omap + - LOCK: + access: r + description: PLL0 lock indicator + lsb: 0 + reset_value: '0' + width: 1 + - FR: + access: r + description: PLL0 free running indicator + lsb: 1 + reset_value: '0' + width: 1 +- CGU_PLL0AUDIO_CTRL: + fields: !!omap + - PD: + access: rw + description: PLL0 power down + lsb: 0 + reset_value: '1' + width: 1 + - BYPASS: + access: rw + description: Input clock bypass control + lsb: 1 + reset_value: '1' + width: 1 + - DIRECTI: + access: rw + description: PLL0 direct input + lsb: 2 + reset_value: '0' + width: 1 + - DIRECTO: + access: rw + description: PLL0 direct output + lsb: 3 + reset_value: '0' + width: 1 + - CLKEN: + access: rw + description: PLL0 clock enable + lsb: 4 + reset_value: '0' + width: 1 + - FRM: + access: rw + description: Free running mode + lsb: 6 + reset_value: '0' + width: 1 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - PLLFRACT_REQ: + access: rw + description: Fractional PLL word write request + lsb: 12 + reset_value: '0' + width: 1 + - SEL_EXT: + access: rw + description: Select fractional divider + lsb: 13 + reset_value: '0' + width: 1 + - MOD_PD: + access: rw + description: Sigma-Delta modulator power-down + lsb: 14 + reset_value: '1' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_PLL0AUDIO_MDIV: + fields: !!omap + - MDEC: + access: rw + description: Decoded M-divider coefficient value + lsb: 0 + reset_value: '0x5B6A' + width: 17 +- CGU_PLL0AUDIO_NP_DIV: + fields: !!omap + - PDEC: + access: rw + description: Decoded P-divider coefficient value + lsb: 0 + reset_value: '0x02' + width: 7 + - NDEC: + access: rw + description: Decoded N-divider coefficient value + lsb: 12 + reset_value: '0xB1' + width: 10 +- CGU_PLLAUDIO_FRAC: + fields: !!omap + - PLLFRACT_CTRL: + access: rw + description: PLL fractional divider control word + lsb: 0 + reset_value: '0x00' + width: 22 +- CGU_PLL1_STAT: + fields: !!omap + - LOCK: + access: r + description: PLL1 lock indicator + lsb: 0 + reset_value: '0' + width: 1 +- CGU_PLL1_CTRL: + fields: !!omap + - PD: + access: rw + description: PLL1 power down + lsb: 0 + reset_value: '1' + width: 1 + - BYPASS: + access: rw + description: Input clock bypass control + lsb: 1 + reset_value: '1' + width: 1 + - FBSEL: + access: rw + description: PLL feedback select + lsb: 6 + reset_value: '0' + width: 1 + - DIRECT: + access: rw + description: PLL direct CCO output + lsb: 7 + reset_value: '0' + width: 1 + - PSEL: + access: rw + description: Post-divider division ratio P + lsb: 8 + reset_value: '0x1' + width: 2 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - NSEL: + access: rw + description: Pre-divider division ratio N + lsb: 12 + reset_value: '0x2' + width: 2 + - MSEL: + access: rw + description: Feedback-divider division ratio (M) + lsb: 16 + reset_value: '0x18' + width: 8 + - CLK_SEL: + access: rw + description: Clock-source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_IDIVA_CTRL: + fields: !!omap + - PD: + access: rw + description: Integer divider power down + lsb: 0 + reset_value: '0' + width: 1 + - IDIV: + access: rw + description: Integer divider A divider value (1/(IDIV + 1)) + lsb: 2 + reset_value: '0x0' + width: 2 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_IDIVB_CTRL: + fields: !!omap + - PD: + access: rw + description: Integer divider power down + lsb: 0 + reset_value: '0' + width: 1 + - IDIV: + access: rw + description: Integer divider B divider value (1/(IDIV + 1)) + lsb: 2 + reset_value: '0x0' + width: 4 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_IDIVC_CTRL: + fields: !!omap + - PD: + access: rw + description: Integer divider power down + lsb: 0 + reset_value: '0' + width: 1 + - IDIV: + access: rw + description: Integer divider C divider value (1/(IDIV + 1)) + lsb: 2 + reset_value: '0x0' + width: 4 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_IDIVD_CTRL: + fields: !!omap + - PD: + access: rw + description: Integer divider power down + lsb: 0 + reset_value: '0' + width: 1 + - IDIV: + access: rw + description: Integer divider D divider value (1/(IDIV + 1)) + lsb: 2 + reset_value: '0x0' + width: 4 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_IDIVE_CTRL: + fields: !!omap + - PD: + access: rw + description: Integer divider power down + lsb: 0 + reset_value: '0' + width: 1 + - IDIV: + access: rw + description: Integer divider E divider value (1/(IDIV + 1)) + lsb: 2 + reset_value: '0x00' + width: 8 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_BASE_SAFE_CLK: + fields: !!omap + - PD: + access: r + description: Output stage power down + lsb: 0 + reset_value: '0' + width: 1 + - AUTOBLOCK: + access: r + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: r + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_BASE_USB0_CLK: + fields: !!omap + - PD: + access: rw + description: Output stage power down + lsb: 0 + reset_value: '0' + width: 1 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x07' + width: 5 +- CGU_BASE_PERIPH_CLK: + fields: !!omap + - PD: + access: rw + description: Output stage power down + lsb: 0 + reset_value: '0' + width: 1 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_BASE_USB1_CLK: + fields: !!omap + - PD: + access: rw + description: Output stage power down + lsb: 0 + reset_value: '0' + width: 1 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_BASE_M4_CLK: + fields: !!omap + - PD: + access: rw + description: Output stage power down + lsb: 0 + reset_value: '0' + width: 1 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_BASE_SPIFI_CLK: + fields: !!omap + - PD: + access: rw + description: Output stage power down + lsb: 0 + reset_value: '0' + width: 1 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_BASE_SPI_CLK: + fields: !!omap + - PD: + access: rw + description: Output stage power down + lsb: 0 + reset_value: '0' + width: 1 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_BASE_PHY_RX_CLK: + fields: !!omap + - PD: + access: rw + description: Output stage power down + lsb: 0 + reset_value: '0' + width: 1 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_BASE_PHY_TX_CLK: + fields: !!omap + - PD: + access: rw + description: Output stage power down + lsb: 0 + reset_value: '0' + width: 1 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_BASE_APB1_CLK: + fields: !!omap + - PD: + access: rw + description: Output stage power down + lsb: 0 + reset_value: '0' + width: 1 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_BASE_APB3_CLK: + fields: !!omap + - PD: + access: rw + description: Output stage power down + lsb: 0 + reset_value: '0' + width: 1 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_BASE_LCD_CLK: + fields: !!omap + - PD: + access: rw + description: Output stage power down + lsb: 0 + reset_value: '0' + width: 1 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_BASE_VADC_CLK: + fields: !!omap + - PD: + access: rw + description: Output stage power down + lsb: 0 + reset_value: '0' + width: 1 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_BASE_SDIO_CLK: + fields: !!omap + - PD: + access: rw + description: Output stage power down + lsb: 0 + reset_value: '0' + width: 1 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_BASE_SSP0_CLK: + fields: !!omap + - PD: + access: rw + description: Output stage power down + lsb: 0 + reset_value: '0' + width: 1 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_BASE_SSP1_CLK: + fields: !!omap + - PD: + access: rw + description: Output stage power down + lsb: 0 + reset_value: '0' + width: 1 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_BASE_UART0_CLK: + fields: !!omap + - PD: + access: rw + description: Output stage power down + lsb: 0 + reset_value: '0' + width: 1 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_BASE_UART1_CLK: + fields: !!omap + - PD: + access: rw + description: Output stage power down + lsb: 0 + reset_value: '0' + width: 1 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_BASE_UART2_CLK: + fields: !!omap + - PD: + access: rw + description: Output stage power down + lsb: 0 + reset_value: '0' + width: 1 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_BASE_UART3_CLK: + fields: !!omap + - PD: + access: rw + description: Output stage power down + lsb: 0 + reset_value: '0' + width: 1 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_BASE_OUT_CLK: + fields: !!omap + - PD: + access: rw + description: Output stage power down + lsb: 0 + reset_value: '0' + width: 1 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_BASE_APLL_CLK: + fields: !!omap + - PD: + access: rw + description: Output stage power down + lsb: 0 + reset_value: '0' + width: 1 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_BASE_CGU_OUT0_CLK: + fields: !!omap + - PD: + access: rw + description: Output stage power down + lsb: 0 + reset_value: '0' + width: 1 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 +- CGU_BASE_CGU_OUT1_CLK: + fields: !!omap + - PD: + access: rw + description: Output stage power down + lsb: 0 + reset_value: '0' + width: 1 + - AUTOBLOCK: + access: rw + description: Block clock automatically during frequency change + lsb: 11 + reset_value: '0' + width: 1 + - CLK_SEL: + access: rw + description: Clock source selection + lsb: 24 + reset_value: '0x01' + width: 5 diff --git a/libopencm3/scripts/data/lpc43xx/creg.yaml b/libopencm3/scripts/data/lpc43xx/creg.yaml new file mode 100644 index 0000000..3fb8ab7 --- /dev/null +++ b/libopencm3/scripts/data/lpc43xx/creg.yaml @@ -0,0 +1,312 @@ +!!omap +- CREG_CREG0: + fields: !!omap + - EN1KHZ: + access: rw + description: Enable 1 kHz output + lsb: 0 + reset_value: '0' + width: 1 + - EN32KHZ: + access: rw + description: Enable 32 kHz output + lsb: 1 + reset_value: '0' + width: 1 + - RESET32KHZ: + access: rw + description: 32 kHz oscillator reset + lsb: 2 + reset_value: '1' + width: 1 + - PD32KHZ: + access: rw + description: 32 kHz power control + lsb: 3 + reset_value: '1' + width: 1 + - USB0PHY: + access: rw + description: USB0 PHY power control + lsb: 5 + reset_value: '1' + width: 1 + - ALARMCTRL: + access: rw + description: RTC_ALARM pin output control + lsb: 6 + reset_value: '0' + width: 2 + - BODLVL1: + access: rw + description: BOD trip level to generate an interrupt + lsb: 8 + reset_value: '0x3' + width: 2 + - BODLVL2: + access: rw + description: BOD trip level to generate a reset + lsb: 10 + reset_value: '0x3' + width: 2 + - SAMPLECTRL: + access: rw + description: SAMPLE pin input/output control + lsb: 12 + reset_value: '0' + width: 2 + - WAKEUP0CTRL: + access: rw + description: WAKEUP0 pin input/output control + lsb: 14 + reset_value: '0' + width: 2 + - WAKEUP1CTRL: + access: rw + description: WAKEUP1 pin input/output control + lsb: 16 + reset_value: '0' + width: 2 +- CREG_M4MEMMAP: + fields: !!omap + - M4MAP: + access: rw + description: Shadow address when accessing memory at address 0x00000000 + lsb: 12 + reset_value: '0x10400000' + width: 20 +- CREG_CREG5: + fields: !!omap + - M4TAPSEL: + access: rw + description: JTAG debug select for M4 core + lsb: 6 + reset_value: '1' + width: 1 + - M0APPTAPSEL: + access: rw + description: JTAG debug select for M0 co-processor + lsb: 9 + reset_value: '1' + width: 1 +- CREG_DMAMUX: + fields: !!omap + - DMAMUXPER0: + access: rw + description: Select DMA to peripheral connection for DMA peripheral 0 + lsb: 0 + reset_value: '0' + width: 2 + - DMAMUXPER1: + access: rw + description: Select DMA to peripheral connection for DMA peripheral 1 + lsb: 2 + reset_value: '0' + width: 2 + - DMAMUXPER2: + access: rw + description: Select DMA to peripheral connection for DMA peripheral 2 + lsb: 4 + reset_value: '0' + width: 2 + - DMAMUXPER3: + access: rw + description: Select DMA to peripheral connection for DMA peripheral 3 + lsb: 6 + reset_value: '0' + width: 2 + - DMAMUXPER4: + access: rw + description: Select DMA to peripheral connection for DMA peripheral 4 + lsb: 8 + reset_value: '0' + width: 2 + - DMAMUXPER5: + access: rw + description: Select DMA to peripheral connection for DMA peripheral 5 + lsb: 10 + reset_value: '0' + width: 2 + - DMAMUXPER6: + access: rw + description: Select DMA to peripheral connection for DMA peripheral 6 + lsb: 12 + reset_value: '0' + width: 2 + - DMAMUXPER7: + access: rw + description: Select DMA to peripheral connection for DMA peripheral 7 + lsb: 14 + reset_value: '0' + width: 2 + - DMAMUXPER8: + access: rw + description: Select DMA to peripheral connection for DMA peripheral 8 + lsb: 16 + reset_value: '0' + width: 2 + - DMAMUXPER9: + access: rw + description: Select DMA to peripheral connection for DMA peripheral 9 + lsb: 18 + reset_value: '0' + width: 2 + - DMAMUXPER10: + access: rw + description: Select DMA to peripheral connection for DMA peripheral 10 + lsb: 20 + reset_value: '0' + width: 2 + - DMAMUXPER11: + access: rw + description: Select DMA to peripheral connection for DMA peripheral 11 + lsb: 22 + reset_value: '0' + width: 2 + - DMAMUXPER12: + access: rw + description: Select DMA to peripheral connection for DMA peripheral 12 + lsb: 24 + reset_value: '0' + width: 2 + - DMAMUXPER13: + access: rw + description: Select DMA to peripheral connection for DMA peripheral 13 + lsb: 26 + reset_value: '0' + width: 2 + - DMAMUXPER14: + access: rw + description: Select DMA to peripheral connection for DMA peripheral 14 + lsb: 28 + reset_value: '0' + width: 2 + - DMAMUXPER15: + access: rw + description: Select DMA to peripheral connection for DMA peripheral 15 + lsb: 30 + reset_value: '0' + width: 2 +- CREG_FLASHCFGA: + fields: !!omap + - FLASHTIM: + access: rw + description: Flash access time. The value of this field plus 1 gives the number + of BASE_M4_CLK clocks used for a flash access + lsb: 12 + reset_value: '' + width: 4 + - POW: + access: rw + description: Flash bank A power control + lsb: 31 + reset_value: '1' + width: 1 +- CREG_FLASHCFGB: + fields: !!omap + - FLASHTIM: + access: rw + description: Flash access time. The value of this field plus 1 gives the number + of BASE_M4_CLK clocks used for a flash access + lsb: 12 + reset_value: '' + width: 4 + - POW: + access: rw + description: Flash bank B power control + lsb: 31 + reset_value: '1' + width: 1 +- CREG_ETBCFG: + fields: !!omap + - ETB: + access: rw + description: Select SRAM interface + lsb: 0 + reset_value: '1' + width: 1 +- CREG_CREG6: + fields: !!omap + - ETHMODE: + access: rw + description: Selects the Ethernet mode. Reset the ethernet after changing + the PHY interface + lsb: 0 + reset_value: '' + width: 3 + - CTOUTCTRL: + access: rw + description: Selects the functionality of the SCT outputs + lsb: 4 + reset_value: '0' + width: 1 + - I2S0_TX_SCK_IN_SEL: + access: rw + description: I2S0_TX_SCK input select + lsb: 12 + reset_value: '0' + width: 1 + - I2S0_RX_SCK_IN_SEL: + access: rw + description: I2S0_RX_SCK input select + lsb: 13 + reset_value: '0' + width: 1 + - I2S1_TX_SCK_IN_SEL: + access: rw + description: I2S1_TX_SCK input select + lsb: 14 + reset_value: '0' + width: 1 + - I2S1_RX_SCK_IN_SEL: + access: rw + description: I2S1_RX_SCK input select + lsb: 15 + reset_value: '0' + width: 1 + - EMC_CLK_SEL: + access: rw + description: EMC_CLK divided clock select + lsb: 16 + reset_value: '0' + width: 1 +- CREG_M4TXEVENT: + fields: !!omap + - TXEVCLR: + access: rw + description: Cortex-M4 TXEV event + lsb: 0 + reset_value: '0' + width: 1 +- CREG_M0TXEVENT: + fields: !!omap + - TXEVCLR: + access: rw + description: Cortex-M0 TXEV event + lsb: 0 + reset_value: '0' + width: 1 +- CREG_M0APPMEMMAP: + fields: !!omap + - M0APPMAP: + access: rw + description: Shadow address when accessing memory at address 0x00000000 + lsb: 12 + reset_value: '0x20000000' + width: 20 +- CREG_USB0FLADJ: + fields: !!omap + - FLTV: + access: rw + description: Frame length timing value + lsb: 0 + reset_value: '0x20' + width: 6 +- CREG_USB1FLADJ: + fields: !!omap + - FLTV: + access: rw + description: Frame length timing value + lsb: 0 + reset_value: '0x20' + width: 6 diff --git a/libopencm3/scripts/data/lpc43xx/csv2yaml.py b/libopencm3/scripts/data/lpc43xx/csv2yaml.py new file mode 100755 index 0000000..1ec9a41 --- /dev/null +++ b/libopencm3/scripts/data/lpc43xx/csv2yaml.py @@ -0,0 +1,37 @@ +#!/usr/bin/env python + +import sys +import yaml +import csv +from collections import OrderedDict +import yaml_odict + +def convert_file(fname): + reader = csv.reader(open(fname, 'r')) + + registers = OrderedDict() + for register_name, lsb, width, field_name, description, reset_value, access in reader: + if register_name not in registers: + registers[register_name] = { + 'fields': OrderedDict(), + } + + register = registers[register_name] + fields = register['fields'] + if field_name in fields: + raise RuntimeError('Duplicate field name "%s" in register "%s"' % + field_name, register_name) + else: + fields[field_name] = { + 'lsb': int(lsb), + 'width': int(width), + 'description': description, + 'reset_value': reset_value, + 'access': access, + } + + with open(fname.replace('.csv', '.yaml'), 'w') as out_file: + yaml.dump(registers, out_file, default_flow_style=False) + +for fname in sys.argv[1:]: + convert_file(fname) diff --git a/libopencm3/scripts/data/lpc43xx/eventrouter.yaml b/libopencm3/scripts/data/lpc43xx/eventrouter.yaml new file mode 100644 index 0000000..677b0d9 --- /dev/null +++ b/libopencm3/scripts/data/lpc43xx/eventrouter.yaml @@ -0,0 +1,959 @@ +!!omap +- EVENTROUTER_HILO: + fields: !!omap + - WAKEUP0_L: + access: rw + description: Level detect mode for WAKEUP0 event + lsb: 0 + reset_value: '0' + width: 1 + - WAKEUP1_L: + access: rw + description: Level detect mode for WAKEUP1 event + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP2_L: + access: rw + description: Level detect mode for WAKEUP2 event + lsb: 2 + reset_value: '0' + width: 1 + - WAKEUP3_L: + access: rw + description: Level detect mode for WAKEUP3 event + lsb: 3 + reset_value: '0' + width: 1 + - ATIMER_L: + access: rw + description: Level detect mode for alarm timer event + lsb: 4 + reset_value: '0' + width: 1 + - RTC_L: + access: rw + description: Level detect mode for RTC event + lsb: 5 + reset_value: '0' + width: 1 + - BOD_L: + access: rw + description: Level detect mode for BOD event + lsb: 6 + reset_value: '0' + width: 1 + - WWDT_L: + access: rw + description: Level detect mode for WWDT event + lsb: 7 + reset_value: '0' + width: 1 + - ETH_L: + access: rw + description: Level detect mode for Ethernet event + lsb: 8 + reset_value: '0' + width: 1 + - USB0_L: + access: rw + description: Level detect mode for USB0 event + lsb: 9 + reset_value: '0' + width: 1 + - USB1_L: + access: rw + description: Level detect mode for USB1 event + lsb: 10 + reset_value: '0' + width: 1 + - SDMMC_L: + access: rw + description: Level detect mode for SD/MMC event + lsb: 11 + reset_value: '0' + width: 1 + - CAN_L: + access: rw + description: Level detect mode for C_CAN event + lsb: 12 + reset_value: '0' + width: 1 + - TIM2_L: + access: rw + description: Level detect mode for combined timer output 2 event + lsb: 13 + reset_value: '0' + width: 1 + - TIM6_L: + access: rw + description: Level detect mode for combined timer output 6 event + lsb: 14 + reset_value: '0' + width: 1 + - QEI_L: + access: rw + description: Level detect mode for QEI event + lsb: 15 + reset_value: '0' + width: 1 + - TIM14_L: + access: rw + description: Level detect mode for combined timer output 14 event + lsb: 16 + reset_value: '0' + width: 1 + - RESET_L: + access: rw + description: Level detect mode for Reset + lsb: 19 + reset_value: '0' + width: 1 +- EVENTROUTER_EDGE: + fields: !!omap + - WAKEUP0_E: + access: rw + description: Edge/Level detect mode for WAKEUP0 event + lsb: 0 + reset_value: '0' + width: 1 + - WAKEUP1_E: + access: rw + description: Edge/Level detect mode for WAKEUP1 event + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP2_E: + access: rw + description: Edge/Level detect mode for WAKEUP2 event + lsb: 2 + reset_value: '0' + width: 1 + - WAKEUP3_E: + access: rw + description: Edge/Level detect mode for WAKEUP3 event + lsb: 3 + reset_value: '0' + width: 1 + - ATIMER_E: + access: rw + description: Edge/Level detect mode for alarm timer event + lsb: 4 + reset_value: '0' + width: 1 + - RTC_E: + access: rw + description: Edge/Level detect mode for RTC event + lsb: 5 + reset_value: '0' + width: 1 + - BOD_E: + access: rw + description: Edge/Level detect mode for BOD event + lsb: 6 + reset_value: '0' + width: 1 + - WWDT_E: + access: rw + description: Edge/Level detect mode for WWDT event + lsb: 7 + reset_value: '0' + width: 1 + - ETH_E: + access: rw + description: Edge/Level detect mode for Ethernet event + lsb: 8 + reset_value: '0' + width: 1 + - USB0_E: + access: rw + description: Edge/Level detect mode for USB0 event + lsb: 9 + reset_value: '0' + width: 1 + - USB1_E: + access: rw + description: Edge/Level detect mode for USB1 event + lsb: 10 + reset_value: '0' + width: 1 + - SDMMC_E: + access: rw + description: Edge/Level detect mode for SD/MMC event + lsb: 11 + reset_value: '0' + width: 1 + - CAN_E: + access: rw + description: Edge/Level detect mode for C_CAN event + lsb: 12 + reset_value: '0' + width: 1 + - TIM2_E: + access: rw + description: Edge/Level detect mode for combined timer output 2 event + lsb: 13 + reset_value: '0' + width: 1 + - TIM6_E: + access: rw + description: Edge/Level detect mode for combined timer output 6 event + lsb: 14 + reset_value: '0' + width: 1 + - QEI_E: + access: rw + description: Edge/Level detect mode for QEI event + lsb: 15 + reset_value: '0' + width: 1 + - TIM14_E: + access: rw + description: Edge/Level detect mode for combined timer output 14 event + lsb: 16 + reset_value: '0' + width: 1 + - RESET_E: + access: rw + description: Edge/Level detect mode for Reset + lsb: 19 + reset_value: '0' + width: 1 +- EVENTROUTER_CLR_EN: + fields: !!omap + - WAKEUP0_CLREN: + access: w + description: Writing a 1 to this bit clears the event enable bit 0 in the + ENABLE register + lsb: 0 + reset_value: '0' + width: 1 + - WAKEUP1_CLREN: + access: w + description: Writing a 1 to this bit clears the event enable bit 1 in the + ENABLE register + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP2_CLREN: + access: w + description: Writing a 1 to this bit clears the event enable bit 2 in the + ENABLE register + lsb: 2 + reset_value: '0' + width: 1 + - WAKEUP3_CLREN: + access: w + description: Writing a 1 to this bit clears the event enable bit 3 in the + ENABLE register + lsb: 3 + reset_value: '0' + width: 1 + - ATIMER_CLREN: + access: w + description: Writing a 1 to this bit clears the event enable bit 4 in the + ENABLE register + lsb: 4 + reset_value: '0' + width: 1 + - RTC_CLREN: + access: w + description: Writing a 1 to this bit clears the event enable bit 5 in the + ENABLE register + lsb: 5 + reset_value: '0' + width: 1 + - BOD_CLREN: + access: w + description: Writing a 1 to this bit clears the event enable bit 6 in the + ENABLE register + lsb: 6 + reset_value: '0' + width: 1 + - WWDT_CLREN: + access: w + description: Writing a 1 to this bit clears the event enable bit 7 in the + ENABLE register + lsb: 7 + reset_value: '0' + width: 1 + - ETH_CLREN: + access: w + description: Writing a 1 to this bit clears the event enable bit 8 in the + ENABLE register + lsb: 8 + reset_value: '0' + width: 1 + - USB0_CLREN: + access: w + description: Writing a 1 to this bit clears the event enable bit 9 in the + ENABLE register + lsb: 9 + reset_value: '0' + width: 1 + - USB1_CLREN: + access: w + description: Writing a 1 to this bit clears the event enable bit 10 in the + ENABLE register + lsb: 10 + reset_value: '0' + width: 1 + - SDMCC_CLREN: + access: w + description: Writing a 1 to this bit clears the event enable bit 11 in the + ENABLE register + lsb: 11 + reset_value: '0' + width: 1 + - CAN_CLREN: + access: w + description: Writing a 1 to this bit clears the event enable bit 12 in the + ENABLE register + lsb: 12 + reset_value: '0' + width: 1 + - TIM2_CLREN: + access: w + description: Writing a 1 to this bit clears the event enable bit 13 in the + ENABLE register + lsb: 13 + reset_value: '0' + width: 1 + - TIM6_CLREN: + access: w + description: Writing a 1 to this bit clears the event enable bit 14 in the + ENABLE register + lsb: 14 + reset_value: '0' + width: 1 + - QEI_CLREN: + access: w + description: Writing a 1 to this bit clears the event enable bit 15 in the + ENABLE register + lsb: 15 + reset_value: '0' + width: 1 + - TIM14_CLREN: + access: w + description: Writing a 1 to this bit clears the event enable bit 16 in the + ENABLE register + lsb: 16 + reset_value: '0' + width: 1 + - RESET_CLREN: + access: w + description: Writing a 1 to this bit clears the event enable bit 19 in the + ENABLE register + lsb: 19 + reset_value: '0' + width: 1 +- EVENTROUTER_SET_EN: + fields: !!omap + - WAKEUP0_SETEN: + access: w + description: Writing a 1 to this bit sets the event enable bit 0 in the ENABLE + register + lsb: 0 + reset_value: '0' + width: 1 + - WAKEUP1_SETEN: + access: w + description: Writing a 1 to this bit sets the event enable bit 1 in the ENABLE + register + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP2_SETEN: + access: w + description: Writing a 1 to this bit sets the event enable bit 2 in the ENABLE + register + lsb: 2 + reset_value: '0' + width: 1 + - WAKEUP3_SETEN: + access: w + description: Writing a 1 to this bit sets the event enable bit 3 in the ENABLE + register + lsb: 3 + reset_value: '0' + width: 1 + - ATIMER_SETEN: + access: w + description: Writing a 1 to this bit sets the event enable bit 4 in the ENABLE + register + lsb: 4 + reset_value: '0' + width: 1 + - RTC_SETEN: + access: w + description: Writing a 1 to this bit sets the event enable bit 5 in the ENABLE + register + lsb: 5 + reset_value: '0' + width: 1 + - BOD_SETEN: + access: w + description: Writing a 1 to this bit sets the event enable bit 6 in the ENABLE + register + lsb: 6 + reset_value: '0' + width: 1 + - WWDT_SETEN: + access: w + description: Writing a 1 to this bit sets the event enable bit 7 in the ENABLE + register + lsb: 7 + reset_value: '0' + width: 1 + - ETH_SETEN: + access: w + description: Writing a 1 to this bit sets the event enable bit 8 in the ENABLE + register + lsb: 8 + reset_value: '0' + width: 1 + - USB0_SETEN: + access: w + description: Writing a 1 to this bit sets the event enable bit 9 in the ENABLE + register + lsb: 9 + reset_value: '0' + width: 1 + - USB1_SETEN: + access: w + description: Writing a 1 to this bit sets the event enable bit 10 in the ENABLE + register + lsb: 10 + reset_value: '0' + width: 1 + - SDMCC_SETEN: + access: w + description: Writing a 1 to this bit sets the event enable bit 11 in the ENABLE + register + lsb: 11 + reset_value: '0' + width: 1 + - CAN_SETEN: + access: w + description: Writing a 1 to this bit sets the event enable bit 12 in the ENABLE + register + lsb: 12 + reset_value: '0' + width: 1 + - TIM2_SETEN: + access: w + description: Writing a 1 to this bit sets the event enable bit 13 in the ENABLE + register + lsb: 13 + reset_value: '0' + width: 1 + - TIM6_SETEN: + access: w + description: Writing a 1 to this bit sets the event enable bit 14 in the ENABLE + register + lsb: 14 + reset_value: '0' + width: 1 + - QEI_SETEN: + access: w + description: Writing a 1 to this bit sets the event enable bit 15 in the ENABLE + register + lsb: 15 + reset_value: '0' + width: 1 + - TIM14_SETEN: + access: w + description: Writing a 1 to this bit sets the event enable bit 16 in the ENABLE + register + lsb: 16 + reset_value: '0' + width: 1 + - RESET_SETEN: + access: w + description: Writing a 1 to this bit sets the event enable bit 19 in the ENABLE + register + lsb: 19 + reset_value: '0' + width: 1 +- EVENTROUTER_STATUS: + fields: !!omap + - WAKEUP0_ST: + access: r + description: A 1 in this bit shows that the WAKEUP0 event has been raised + lsb: 0 + reset_value: '1' + width: 1 + - WAKEUP1_ST: + access: r + description: A 1 in this bit shows that the WAKEUP1 event has been raised + lsb: 1 + reset_value: '1' + width: 1 + - WAKEUP2_ST: + access: r + description: A 1 in this bit shows that the WAKEUP2 event has been raised + lsb: 2 + reset_value: '1' + width: 1 + - WAKEUP3_ST: + access: r + description: A 1 in this bit shows that the WAKEUP3 event has been raised + lsb: 3 + reset_value: '1' + width: 1 + - ATIMER_ST: + access: r + description: A 1 in this bit shows that the ATIMER event has been raised + lsb: 4 + reset_value: '1' + width: 1 + - RTC_ST: + access: r + description: A 1 in this bit shows that the RTC event has been raised + lsb: 5 + reset_value: '1' + width: 1 + - BOD_ST: + access: r + description: A 1 in this bit shows that the BOD event has been raised + lsb: 6 + reset_value: '1' + width: 1 + - WWDT_ST: + access: r + description: A 1 in this bit shows that the WWDT event has been raised + lsb: 7 + reset_value: '1' + width: 1 + - ETH_ST: + access: r + description: A 1 in this bit shows that the ETH event has been raised + lsb: 8 + reset_value: '1' + width: 1 + - USB0_ST: + access: r + description: A 1 in this bit shows that the USB0 event has been raised + lsb: 9 + reset_value: '1' + width: 1 + - USB1_ST: + access: r + description: A 1 in this bit shows that the USB1 event has been raised + lsb: 10 + reset_value: '1' + width: 1 + - SDMMC_ST: + access: r + description: A 1 in this bit shows that the SDMMC event has been raised + lsb: 11 + reset_value: '1' + width: 1 + - CAN_ST: + access: r + description: A 1 in this bit shows that the CAN event has been raised + lsb: 12 + reset_value: '1' + width: 1 + - TIM2_ST: + access: r + description: A 1 in this bit shows that the combined timer 2 output event + has been raised + lsb: 13 + reset_value: '1' + width: 1 + - TIM6_ST: + access: r + description: A 1 in this bit shows that the combined timer 6 output event + has been raised + lsb: 14 + reset_value: '1' + width: 1 + - QEI_ST: + access: r + description: A 1 in this bit shows that the QEI event has been raised + lsb: 15 + reset_value: '1' + width: 1 + - TIM14_ST: + access: r + description: A 1 in this bit shows that the combined timer 14 output event + has been raised + lsb: 16 + reset_value: '1' + width: 1 + - RESET_ST: + access: r + description: A 1 in this bit shows that the reset event has been raised + lsb: 19 + reset_value: '1' + width: 1 +- EVENTROUTER_ENABLE: + fields: !!omap + - WAKEUP0_EN: + access: r + description: A 1 in this bit shows that the WAKEUP0 event has been enabled + lsb: 0 + reset_value: '0' + width: 1 + - WAKEUP1_EN: + access: r + description: A 1 in this bit shows that the WAKEUP1 event has been enabled + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP2_EN: + access: r + description: A 1 in this bit shows that the WAKEUP2 event has been enabled + lsb: 2 + reset_value: '0' + width: 1 + - WAKEUP3_EN: + access: r + description: A 1 in this bit shows that the WAKEUP3 event has been enabled + lsb: 3 + reset_value: '0' + width: 1 + - ATIMER_EN: + access: r + description: A 1 in this bit shows that the ATIMER event has been enabled + lsb: 4 + reset_value: '0' + width: 1 + - RTC_EN: + access: r + description: A 1 in this bit shows that the RTC event has been enabled + lsb: 5 + reset_value: '0' + width: 1 + - BOD_EN: + access: r + description: A 1 in this bit shows that the BOD event has been enabled + lsb: 6 + reset_value: '0' + width: 1 + - WWDT_EN: + access: r + description: A 1 in this bit shows that the WWDT event has been enabled + lsb: 7 + reset_value: '0' + width: 1 + - ETH_EN: + access: r + description: A 1 in this bit shows that the ETH event has been enabled + lsb: 8 + reset_value: '0' + width: 1 + - USB0_EN: + access: r + description: A 1 in this bit shows that the USB0 event has been enabled + lsb: 9 + reset_value: '0' + width: 1 + - USB1_EN: + access: r + description: A 1 in this bit shows that the USB1 event has been enabled + lsb: 10 + reset_value: '0' + width: 1 + - SDMMC_EN: + access: r + description: A 1 in this bit shows that the SDMMC event has been enabled + lsb: 11 + reset_value: '0' + width: 1 + - CAN_EN: + access: r + description: A 1 in this bit shows that the CAN event has been enabled + lsb: 12 + reset_value: '0' + width: 1 + - TIM2_EN: + access: r + description: A 1 in this bit shows that the combined timer 2 output event + has been enabled + lsb: 13 + reset_value: '0' + width: 1 + - TIM6_EN: + access: r + description: A 1 in this bit shows that the combined timer 6 output event + has been enabled + lsb: 14 + reset_value: '0' + width: 1 + - QEI_EN: + access: r + description: A 1 in this bit shows that the QEI event has been enabled + lsb: 15 + reset_value: '0' + width: 1 + - TIM14_EN: + access: r + description: A 1 in this bit shows that the combined timer 14 output event + has been enabled + lsb: 16 + reset_value: '0' + width: 1 + - RESET_EN: + access: r + description: A 1 in this bit shows that the reset event has been enabled + lsb: 19 + reset_value: '0' + width: 1 +- EVENTROUTER_CLR_STAT: + fields: !!omap + - WAKEUP0_CLRST: + access: w + description: Writing a 1 to this bit clears the STATUS event bit 0 in the + STATUS register + lsb: 0 + reset_value: '0' + width: 1 + - WAKEUP1_CLRST: + access: w + description: Writing a 1 to this bit clears the STATUS event bit 1 in the + STATUS register + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP2_CLRST: + access: w + description: Writing a 1 to this bit clears the STATUS event bit 2 in the + STATUS register + lsb: 2 + reset_value: '0' + width: 1 + - WAKEUP3_CLRST: + access: w + description: Writing a 1 to this bit clears the STATUS event bit 3 in the + STATUS register + lsb: 3 + reset_value: '0' + width: 1 + - ATIMER_CLRST: + access: w + description: Writing a 1 to this bit clears the STATUS event bit 4 in the + STATUS register + lsb: 4 + reset_value: '0' + width: 1 + - RTC_CLRST: + access: w + description: Writing a 1 to this bit clears the STATUS event bit 5 in the + STATUS register + lsb: 5 + reset_value: '0' + width: 1 + - BOD_CLRST: + access: w + description: Writing a 1 to this bit clears the STATUS event bit 6 in the + STATUS register + lsb: 6 + reset_value: '0' + width: 1 + - WWDT_CLRST: + access: w + description: Writing a 1 to this bit clears the STATUS event bit 7 in the + STATUS register + lsb: 7 + reset_value: '0' + width: 1 + - ETH_CLRST: + access: w + description: Writing a 1 to this bit clears the STATUS event bit 8 in the + STATUS register + lsb: 8 + reset_value: '0' + width: 1 + - USB0_CLRST: + access: w + description: Writing a 1 to this bit clears the STATUS event bit 9 in the + STATUS register + lsb: 9 + reset_value: '0' + width: 1 + - USB1_CLRST: + access: w + description: Writing a 1 to this bit clears the STATUS event bit 10 in the + STATUS register + lsb: 10 + reset_value: '0' + width: 1 + - SDMCC_CLRST: + access: w + description: Writing a 1 to this bit clears the STATUS event bit 11 in the + STATUS register + lsb: 11 + reset_value: '0' + width: 1 + - CAN_CLRST: + access: w + description: Writing a 1 to this bit clears the STATUS event bit 12 in the + STATUS register + lsb: 12 + reset_value: '0' + width: 1 + - TIM2_CLRST: + access: w + description: Writing a 1 to this bit clears the STATUS event bit 13 in the + STATUS register + lsb: 13 + reset_value: '0' + width: 1 + - TIM6_CLRST: + access: w + description: Writing a 1 to this bit clears the STATUS event bit 14 in the + STATUS register + lsb: 14 + reset_value: '0' + width: 1 + - QEI_CLRST: + access: w + description: Writing a 1 to this bit clears the STATUS event bit 15 in the + STATUS register + lsb: 15 + reset_value: '0' + width: 1 + - TIM14_CLRST: + access: w + description: Writing a 1 to this bit clears the STATUS event bit 16 in the + STATUS register + lsb: 16 + reset_value: '0' + width: 1 + - RESET_CLRST: + access: w + description: Writing a 1 to this bit clears the STATUS event bit 19 in the + STATUS register + lsb: 19 + reset_value: '0' + width: 1 +- EVENTROUTER_SET_STAT: + fields: !!omap + - WAKEUP0_SETST: + access: w + description: Writing a 1 to this bit sets the STATUS event bit 0 in the STATUS + register + lsb: 0 + reset_value: '0' + width: 1 + - WAKEUP1_SETST: + access: w + description: Writing a 1 to this bit sets the STATUS event bit 1 in the STATUS + register + lsb: 1 + reset_value: '0' + width: 1 + - WAKEUP2_SETST: + access: w + description: Writing a 1 to this bit sets the STATUS event bit 2 in the STATUS + register + lsb: 2 + reset_value: '0' + width: 1 + - WAKEUP3_SETST: + access: w + description: Writing a 1 to this bit sets the STATUS event bit 3 in the STATUS + register + lsb: 3 + reset_value: '0' + width: 1 + - ATIMER_SETST: + access: w + description: Writing a 1 to this bit sets the STATUS event bit 4 in the STATUS + register + lsb: 4 + reset_value: '0' + width: 1 + - RTC_SETST: + access: w + description: Writing a 1 to this bit sets the STATUS event bit 5 in the STATUS + register + lsb: 5 + reset_value: '0' + width: 1 + - BOD_SETST: + access: w + description: Writing a 1 to this bit sets the STATUS event bit 6 in the STATUS + register + lsb: 6 + reset_value: '0' + width: 1 + - WWDT_SETST: + access: w + description: Writing a 1 to this bit sets the STATUS event bit 7 in the STATUS + register + lsb: 7 + reset_value: '0' + width: 1 + - ETH_SETST: + access: w + description: Writing a 1 to this bit sets the STATUS event bit 8 in the STATUS + register + lsb: 8 + reset_value: '0' + width: 1 + - USB0_SETST: + access: w + description: Writing a 1 to this bit sets the STATUS event bit 9 in the STATUS + register + lsb: 9 + reset_value: '0' + width: 1 + - USB1_SETST: + access: w + description: Writing a 1 to this bit sets the STATUS event bit 10 in the STATUS + register + lsb: 10 + reset_value: '0' + width: 1 + - SDMCC_SETST: + access: w + description: Writing a 1 to this bit sets the STATUS event bit 11 in the STATUS + register + lsb: 11 + reset_value: '0' + width: 1 + - CAN_SETST: + access: w + description: Writing a 1 to this bit sets the STATUS event bit 12 in the STATUS + register + lsb: 12 + reset_value: '0' + width: 1 + - TIM2_SETST: + access: w + description: Writing a 1 to this bit sets the STATUS event bit 13 in the STATUS + register + lsb: 13 + reset_value: '0' + width: 1 + - TIM6_SETST: + access: w + description: Writing a 1 to this bit sets the STATUS event bit 14 in the STATUS + register + lsb: 14 + reset_value: '0' + width: 1 + - QEI_SETST: + access: w + description: Writing a 1 to this bit sets the STATUS event bit 15 in the STATUS + register + lsb: 15 + reset_value: '0' + width: 1 + - TIM14_SETST: + access: w + description: Writing a 1 to this bit sets the STATUS event bit 16 in the STATUS + register + lsb: 16 + reset_value: '0' + width: 1 + - RESET_SETST: + access: w + description: Writing a 1 to this bit sets the STATUS event bit 19 in the STATUS + register + lsb: 19 + reset_value: '0' + width: 1 diff --git a/libopencm3/scripts/data/lpc43xx/gen.py b/libopencm3/scripts/data/lpc43xx/gen.py new file mode 100755 index 0000000..0a46e06 --- /dev/null +++ b/libopencm3/scripts/data/lpc43xx/gen.py @@ -0,0 +1,29 @@ +#!/usr/bin/env python + +import sys +import yaml +import yaml_odict +from collections import OrderedDict + +from pprint import pprint + +registers = yaml.load(open(sys.argv[1], 'r')) + +for register_name, register in registers.iteritems(): + print('/* --- %s values %s */' % (register_name, '-' * (50 - len(register_name)))) + print + fields = register['fields'] + #for field_name, field in sorted(fields.items(), lambda x, y: cmp(x[1]['lsb'], y[1]['lsb'])): + for field_name, field in fields.items(): + mask_bits = (1 << field['width']) - 1 + print('/* %s: %s */' % (field_name, field['description'])) + print('#define %s_%s_SHIFT (%d)' % ( + register_name, field_name, field['lsb'], + )) + print('#define %s_%s_MASK (0x%x << %s_%s_SHIFT)' % ( + register_name, field_name, mask_bits, register_name, field_name, + )) + print('#define %s_%s(x) ((x) << %s_%s_SHIFT)' % ( + register_name, field_name, register_name, field_name, + )) + print diff --git a/libopencm3/scripts/data/lpc43xx/gima.yaml b/libopencm3/scripts/data/lpc43xx/gima.yaml new file mode 100644 index 0000000..d34086d --- /dev/null +++ b/libopencm3/scripts/data/lpc43xx/gima.yaml @@ -0,0 +1,961 @@ +!!omap +- GIMA_CAP0_0_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_CAP0_1_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_CAP0_2_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_CAP0_3_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_CAP1_0_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_CAP1_1_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_CAP1_2_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_CAP1_3_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_CAP2_0_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_CAP2_1_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_CAP2_2_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_CAP2_3_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_CAP3_0_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_CAP3_1_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_CAP3_2_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_CAP3_3_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_CTIN_0_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_CTIN_1_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_CTIN_2_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_CTIN_3_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_CTIN_4_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_CTIN_5_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_CTIN_6_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_CTIN_7_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_VADC_TRIGGER_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_EVENTROUTER_13_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_EVENTROUTER_14_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_EVENTROUTER_16_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_ADCSTART0_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 +- GIMA_ADCSTART1_IN: + fields: !!omap + - INV: + access: rw + description: Invert input + lsb: 0 + reset_value: '0' + width: 1 + - EDGE: + access: rw + description: Enable rising edge detection + lsb: 1 + reset_value: '0' + width: 1 + - SYNCH: + access: rw + description: Enable synchronization + lsb: 2 + reset_value: '0' + width: 1 + - PULSE: + access: rw + description: Enable single pulse generation + lsb: 3 + reset_value: '0' + width: 1 + - SELECT: + access: rw + description: Select input + lsb: 4 + reset_value: '0' + width: 4 diff --git a/libopencm3/scripts/data/lpc43xx/gpdma.yaml b/libopencm3/scripts/data/lpc43xx/gpdma.yaml new file mode 100644 index 0000000..b53ea85 --- /dev/null +++ b/libopencm3/scripts/data/lpc43xx/gpdma.yaml @@ -0,0 +1,1498 @@ +!!omap +- GPDMA_INTSTAT: + fields: !!omap + - INTSTAT: + access: r + description: Status of DMA channel interrupts after masking + lsb: 0 + reset_value: '0x00' + width: 8 +- GPDMA_INTTCSTAT: + fields: !!omap + - INTTCSTAT: + access: r + description: Terminal count interrupt request status for DMA channels + lsb: 0 + reset_value: '0x00' + width: 8 +- GPDMA_INTTCCLEAR: + fields: !!omap + - INTTCCLEAR: + access: w + description: Allows clearing the Terminal count interrupt request (IntTCStat) + for DMA channels + lsb: 0 + reset_value: '0x00' + width: 8 +- GPDMA_INTERRSTAT: + fields: !!omap + - INTERRSTAT: + access: r + description: Interrupt error status for DMA channels + lsb: 0 + reset_value: '0x00' + width: 8 +- GPDMA_INTERRCLR: + fields: !!omap + - INTERRCLR: + access: w + description: Writing a 1 clears the error interrupt request (IntErrStat) for + DMA channels + lsb: 0 + reset_value: '0x00' + width: 8 +- GPDMA_RAWINTTCSTAT: + fields: !!omap + - RAWINTTCSTAT: + access: r + description: Status of the terminal count interrupt for DMA channels prior + to masking + lsb: 0 + reset_value: '0x00' + width: 8 +- GPDMA_RAWINTERRSTAT: + fields: !!omap + - RAWINTERRSTAT: + access: r + description: Status of the error interrupt for DMA channels prior to masking + lsb: 0 + reset_value: '0x00' + width: 8 +- GPDMA_ENBLDCHNS: + fields: !!omap + - ENABLEDCHANNELS: + access: r + description: Enable status for DMA channels + lsb: 0 + reset_value: '0x00' + width: 8 +- GPDMA_SOFTBREQ: + fields: !!omap + - SOFTBREQ: + access: rw + description: Software burst request flags for each of 16 possible sources + lsb: 0 + reset_value: '0x00' + width: 16 +- GPDMA_SOFTSREQ: + fields: !!omap + - SOFTSREQ: + access: rw + description: Software single transfer request flags for each of 16 possible + sources + lsb: 0 + reset_value: '0x00' + width: 16 +- GPDMA_SOFTLBREQ: + fields: !!omap + - SOFTLBREQ: + access: rw + description: Software last burst request flags for each of 16 possible sources + lsb: 0 + reset_value: '0x00' + width: 16 +- GPDMA_SOFTLSREQ: + fields: !!omap + - SOFTLSREQ: + access: rw + description: Software last single transfer request flags for each of 16 possible + sources + lsb: 0 + reset_value: '0x00' + width: 16 +- GPDMA_CONFIG: + fields: !!omap + - E: + access: rw + description: DMA Controller enable + lsb: 0 + reset_value: '0' + width: 1 + - M0: + access: rw + description: AHB Master 0 endianness configuration + lsb: 1 + reset_value: '0' + width: 1 + - M1: + access: rw + description: AHB Master 1 endianness configuration + lsb: 2 + reset_value: '0' + width: 1 +- GPDMA_SYNC: + fields: !!omap + - DMACSYNC: + access: rw + description: Controls the synchronization logic for DMA request signals + lsb: 0 + reset_value: '0x00' + width: 16 +- GPDMA_C0SRCADDR: + fields: !!omap + - SRCADDR: + access: rw + description: DMA source address + lsb: 0 + reset_value: '0x00000000' + width: 32 +- GPDMA_C1SRCADDR: + fields: !!omap + - SRCADDR: + access: rw + description: DMA source address + lsb: 0 + reset_value: '0x00000000' + width: 32 +- GPDMA_C2SRCADDR: + fields: !!omap + - SRCADDR: + access: rw + description: DMA source address + lsb: 0 + reset_value: '0x00000000' + width: 32 +- GPDMA_C3SRCADDR: + fields: !!omap + - SRCADDR: + access: rw + description: DMA source address + lsb: 0 + reset_value: '0x00000000' + width: 32 +- GPDMA_C4SRCADDR: + fields: !!omap + - SRCADDR: + access: rw + description: DMA source address + lsb: 0 + reset_value: '0x00000000' + width: 32 +- GPDMA_C5SRCADDR: + fields: !!omap + - SRCADDR: + access: rw + description: DMA source address + lsb: 0 + reset_value: '0x00000000' + width: 32 +- GPDMA_C6SRCADDR: + fields: !!omap + - SRCADDR: + access: rw + description: DMA source address + lsb: 0 + reset_value: '0x00000000' + width: 32 +- GPDMA_C7SRCADDR: + fields: !!omap + - SRCADDR: + access: rw + description: DMA source address + lsb: 0 + reset_value: '0x00000000' + width: 32 +- GPDMA_C0DESTADDR: + fields: !!omap + - DESTADDR: + access: rw + description: DMA source address + lsb: 0 + reset_value: '0x00000000' + width: 32 +- GPDMA_C1DESTADDR: + fields: !!omap + - DESTADDR: + access: rw + description: DMA source address + lsb: 0 + reset_value: '0x00000000' + width: 32 +- GPDMA_C2DESTADDR: + fields: !!omap + - DESTADDR: + access: rw + description: DMA source address + lsb: 0 + reset_value: '0x00000000' + width: 32 +- GPDMA_C3DESTADDR: + fields: !!omap + - DESTADDR: + access: rw + description: DMA source address + lsb: 0 + reset_value: '0x00000000' + width: 32 +- GPDMA_C4DESTADDR: + fields: !!omap + - DESTADDR: + access: rw + description: DMA source address + lsb: 0 + reset_value: '0x00000000' + width: 32 +- GPDMA_C5DESTADDR: + fields: !!omap + - DESTADDR: + access: rw + description: DMA source address + lsb: 0 + reset_value: '0x00000000' + width: 32 +- GPDMA_C6DESTADDR: + fields: !!omap + - DESTADDR: + access: rw + description: DMA source address + lsb: 0 + reset_value: '0x00000000' + width: 32 +- GPDMA_C7DESTADDR: + fields: !!omap + - DESTADDR: + access: rw + description: DMA source address + lsb: 0 + reset_value: '0x00000000' + width: 32 +- GPDMA_C0LLI: + fields: !!omap + - LM: + access: rw + description: AHB master select for loading the next LLI + lsb: 0 + reset_value: '0' + width: 1 + - LLI: + access: rw + description: Linked list item + lsb: 2 + reset_value: '0x00000000' + width: 30 +- GPDMA_C1LLI: + fields: !!omap + - LM: + access: rw + description: AHB master select for loading the next LLI + lsb: 0 + reset_value: '0' + width: 1 + - LLI: + access: rw + description: Linked list item + lsb: 2 + reset_value: '0x00000000' + width: 30 +- GPDMA_C2LLI: + fields: !!omap + - LM: + access: rw + description: AHB master select for loading the next LLI + lsb: 0 + reset_value: '0' + width: 1 + - LLI: + access: rw + description: Linked list item + lsb: 2 + reset_value: '0x00000000' + width: 30 +- GPDMA_C3LLI: + fields: !!omap + - LM: + access: rw + description: AHB master select for loading the next LLI + lsb: 0 + reset_value: '0' + width: 1 + - LLI: + access: rw + description: Linked list item + lsb: 2 + reset_value: '0x00000000' + width: 30 +- GPDMA_C4LLI: + fields: !!omap + - LM: + access: rw + description: AHB master select for loading the next LLI + lsb: 0 + reset_value: '0' + width: 1 + - LLI: + access: rw + description: Linked list item + lsb: 2 + reset_value: '0x00000000' + width: 30 +- GPDMA_C5LLI: + fields: !!omap + - LM: + access: rw + description: AHB master select for loading the next LLI + lsb: 0 + reset_value: '0' + width: 1 + - LLI: + access: rw + description: Linked list item + lsb: 2 + reset_value: '0x00000000' + width: 30 +- GPDMA_C6LLI: + fields: !!omap + - LM: + access: rw + description: AHB master select for loading the next LLI + lsb: 0 + reset_value: '0' + width: 1 + - LLI: + access: rw + description: Linked list item + lsb: 2 + reset_value: '0x00000000' + width: 30 +- GPDMA_C7LLI: + fields: !!omap + - LM: + access: rw + description: AHB master select for loading the next LLI + lsb: 0 + reset_value: '0' + width: 1 + - LLI: + access: rw + description: Linked list item + lsb: 2 + reset_value: '0x00000000' + width: 30 +- GPDMA_C0CONTROL: + fields: !!omap + - TRANSFERSIZE: + access: rw + description: Transfer size in number of transfers + lsb: 0 + reset_value: '0x00' + width: 12 + - SBSIZE: + access: rw + description: Source burst size + lsb: 12 + reset_value: '0x0' + width: 3 + - DBSIZE: + access: rw + description: Destination burst size + lsb: 15 + reset_value: '0x0' + width: 3 + - SWIDTH: + access: rw + description: Source transfer width + lsb: 18 + reset_value: '0x0' + width: 3 + - DWIDTH: + access: rw + description: Destination transfer width + lsb: 21 + reset_value: '0x0' + width: 3 + - S: + access: rw + description: Source AHB master select + lsb: 24 + reset_value: '0' + width: 1 + - D: + access: rw + description: Destination AHB master select + lsb: 25 + reset_value: '0' + width: 1 + - SI: + access: rw + description: Source increment + lsb: 26 + reset_value: '0' + width: 1 + - DI: + access: rw + description: Destination increment + lsb: 27 + reset_value: '0' + width: 1 + - PROT1: + access: rw + description: This information is provided to the peripheral during a DMA bus + access and indicates that the access is in user mode or privileged mode + lsb: 28 + reset_value: '0' + width: 1 + - PROT2: + access: rw + description: This information is provided to the peripheral during a DMA bus + access and indicates to the peripheral that the access is bufferable or + not bufferable + lsb: 29 + reset_value: '0' + width: 1 + - PROT3: + access: rw + description: This information is provided to the peripheral during a DMA bus + access and indicates to the peripheral that the access is cacheable or not + cacheable + lsb: 30 + reset_value: '0' + width: 1 + - I: + access: rw + description: Terminal count interrupt enable bit + lsb: 31 + reset_value: '0' + width: 1 +- GPDMA_C1CONTROL: + fields: !!omap + - TRANSFERSIZE: + access: rw + description: Transfer size in number of transfers + lsb: 0 + reset_value: '0x00' + width: 12 + - SBSIZE: + access: rw + description: Source burst size + lsb: 12 + reset_value: '0x0' + width: 3 + - DBSIZE: + access: rw + description: Destination burst size + lsb: 15 + reset_value: '0x0' + width: 3 + - SWIDTH: + access: rw + description: Source transfer width + lsb: 18 + reset_value: '0x0' + width: 3 + - DWIDTH: + access: rw + description: Destination transfer width + lsb: 21 + reset_value: '0x0' + width: 3 + - S: + access: rw + description: Source AHB master select + lsb: 24 + reset_value: '0' + width: 1 + - D: + access: rw + description: Destination AHB master select + lsb: 25 + reset_value: '0' + width: 1 + - SI: + access: rw + description: Source increment + lsb: 26 + reset_value: '0' + width: 1 + - DI: + access: rw + description: Destination increment + lsb: 27 + reset_value: '0' + width: 1 + - PROT1: + access: rw + description: This information is provided to the peripheral during a DMA bus + access and indicates that the access is in user mode or privileged mode + lsb: 28 + reset_value: '0' + width: 1 + - PROT2: + access: rw + description: This information is provided to the peripheral during a DMA bus + access and indicates to the peripheral that the access is bufferable or + not bufferable + lsb: 29 + reset_value: '0' + width: 1 + - PROT3: + access: rw + description: This information is provided to the peripheral during a DMA bus + access and indicates to the peripheral that the access is cacheable or not + cacheable + lsb: 30 + reset_value: '0' + width: 1 + - I: + access: rw + description: Terminal count interrupt enable bit + lsb: 31 + reset_value: '0' + width: 1 +- GPDMA_C2CONTROL: + fields: !!omap + - TRANSFERSIZE: + access: rw + description: Transfer size in number of transfers + lsb: 0 + reset_value: '0x00' + width: 12 + - SBSIZE: + access: rw + description: Source burst size + lsb: 12 + reset_value: '0x0' + width: 3 + - DBSIZE: + access: rw + description: Destination burst size + lsb: 15 + reset_value: '0x0' + width: 3 + - SWIDTH: + access: rw + description: Source transfer width + lsb: 18 + reset_value: '0x0' + width: 3 + - DWIDTH: + access: rw + description: Destination transfer width + lsb: 21 + reset_value: '0x0' + width: 3 + - S: + access: rw + description: Source AHB master select + lsb: 24 + reset_value: '0' + width: 1 + - D: + access: rw + description: Destination AHB master select + lsb: 25 + reset_value: '0' + width: 1 + - SI: + access: rw + description: Source increment + lsb: 26 + reset_value: '0' + width: 1 + - DI: + access: rw + description: Destination increment + lsb: 27 + reset_value: '0' + width: 1 + - PROT1: + access: rw + description: This information is provided to the peripheral during a DMA bus + access and indicates that the access is in user mode or privileged mode + lsb: 28 + reset_value: '0' + width: 1 + - PROT2: + access: rw + description: This information is provided to the peripheral during a DMA bus + access and indicates to the peripheral that the access is bufferable or + not bufferable + lsb: 29 + reset_value: '0' + width: 1 + - PROT3: + access: rw + description: This information is provided to the peripheral during a DMA bus + access and indicates to the peripheral that the access is cacheable or not + cacheable + lsb: 30 + reset_value: '0' + width: 1 + - I: + access: rw + description: Terminal count interrupt enable bit + lsb: 31 + reset_value: '0' + width: 1 +- GPDMA_C3CONTROL: + fields: !!omap + - TRANSFERSIZE: + access: rw + description: Transfer size in number of transfers + lsb: 0 + reset_value: '0x00' + width: 12 + - SBSIZE: + access: rw + description: Source burst size + lsb: 12 + reset_value: '0x0' + width: 3 + - DBSIZE: + access: rw + description: Destination burst size + lsb: 15 + reset_value: '0x0' + width: 3 + - SWIDTH: + access: rw + description: Source transfer width + lsb: 18 + reset_value: '0x0' + width: 3 + - DWIDTH: + access: rw + description: Destination transfer width + lsb: 21 + reset_value: '0x0' + width: 3 + - S: + access: rw + description: Source AHB master select + lsb: 24 + reset_value: '0' + width: 1 + - D: + access: rw + description: Destination AHB master select + lsb: 25 + reset_value: '0' + width: 1 + - SI: + access: rw + description: Source increment + lsb: 26 + reset_value: '0' + width: 1 + - DI: + access: rw + description: Destination increment + lsb: 27 + reset_value: '0' + width: 1 + - PROT1: + access: rw + description: This information is provided to the peripheral during a DMA bus + access and indicates that the access is in user mode or privileged mode + lsb: 28 + reset_value: '0' + width: 1 + - PROT2: + access: rw + description: This information is provided to the peripheral during a DMA bus + access and indicates to the peripheral that the access is bufferable or + not bufferable + lsb: 29 + reset_value: '0' + width: 1 + - PROT3: + access: rw + description: This information is provided to the peripheral during a DMA bus + access and indicates to the peripheral that the access is cacheable or not + cacheable + lsb: 30 + reset_value: '0' + width: 1 + - I: + access: rw + description: Terminal count interrupt enable bit + lsb: 31 + reset_value: '0' + width: 1 +- GPDMA_C4CONTROL: + fields: !!omap + - TRANSFERSIZE: + access: rw + description: Transfer size in number of transfers + lsb: 0 + reset_value: '0x00' + width: 12 + - SBSIZE: + access: rw + description: Source burst size + lsb: 12 + reset_value: '0x0' + width: 3 + - DBSIZE: + access: rw + description: Destination burst size + lsb: 15 + reset_value: '0x0' + width: 3 + - SWIDTH: + access: rw + description: Source transfer width + lsb: 18 + reset_value: '0x0' + width: 3 + - DWIDTH: + access: rw + description: Destination transfer width + lsb: 21 + reset_value: '0x0' + width: 3 + - S: + access: rw + description: Source AHB master select + lsb: 24 + reset_value: '0' + width: 1 + - D: + access: rw + description: Destination AHB master select + lsb: 25 + reset_value: '0' + width: 1 + - SI: + access: rw + description: Source increment + lsb: 26 + reset_value: '0' + width: 1 + - DI: + access: rw + description: Destination increment + lsb: 27 + reset_value: '0' + width: 1 + - PROT1: + access: rw + description: This information is provided to the peripheral during a DMA bus + access and indicates that the access is in user mode or privileged mode + lsb: 28 + reset_value: '0' + width: 1 + - PROT2: + access: rw + description: This information is provided to the peripheral during a DMA bus + access and indicates to the peripheral that the access is bufferable or + not bufferable + lsb: 29 + reset_value: '0' + width: 1 + - PROT3: + access: rw + description: This information is provided to the peripheral during a DMA bus + access and indicates to the peripheral that the access is cacheable or not + cacheable + lsb: 30 + reset_value: '0' + width: 1 + - I: + access: rw + description: Terminal count interrupt enable bit + lsb: 31 + reset_value: '0' + width: 1 +- GPDMA_C5CONTROL: + fields: !!omap + - TRANSFERSIZE: + access: rw + description: Transfer size in number of transfers + lsb: 0 + reset_value: '0x00' + width: 12 + - SBSIZE: + access: rw + description: Source burst size + lsb: 12 + reset_value: '0x0' + width: 3 + - DBSIZE: + access: rw + description: Destination burst size + lsb: 15 + reset_value: '0x0' + width: 3 + - SWIDTH: + access: rw + description: Source transfer width + lsb: 18 + reset_value: '0x0' + width: 3 + - DWIDTH: + access: rw + description: Destination transfer width + lsb: 21 + reset_value: '0x0' + width: 3 + - S: + access: rw + description: Source AHB master select + lsb: 24 + reset_value: '0' + width: 1 + - D: + access: rw + description: Destination AHB master select + lsb: 25 + reset_value: '0' + width: 1 + - SI: + access: rw + description: Source increment + lsb: 26 + reset_value: '0' + width: 1 + - DI: + access: rw + description: Destination increment + lsb: 27 + reset_value: '0' + width: 1 + - PROT1: + access: rw + description: This information is provided to the peripheral during a DMA bus + access and indicates that the access is in user mode or privileged mode + lsb: 28 + reset_value: '0' + width: 1 + - PROT2: + access: rw + description: This information is provided to the peripheral during a DMA bus + access and indicates to the peripheral that the access is bufferable or + not bufferable + lsb: 29 + reset_value: '0' + width: 1 + - PROT3: + access: rw + description: This information is provided to the peripheral during a DMA bus + access and indicates to the peripheral that the access is cacheable or not + cacheable + lsb: 30 + reset_value: '0' + width: 1 + - I: + access: rw + description: Terminal count interrupt enable bit + lsb: 31 + reset_value: '0' + width: 1 +- GPDMA_C6CONTROL: + fields: !!omap + - TRANSFERSIZE: + access: rw + description: Transfer size in number of transfers + lsb: 0 + reset_value: '0x00' + width: 12 + - SBSIZE: + access: rw + description: Source burst size + lsb: 12 + reset_value: '0x0' + width: 3 + - DBSIZE: + access: rw + description: Destination burst size + lsb: 15 + reset_value: '0x0' + width: 3 + - SWIDTH: + access: rw + description: Source transfer width + lsb: 18 + reset_value: '0x0' + width: 3 + - DWIDTH: + access: rw + description: Destination transfer width + lsb: 21 + reset_value: '0x0' + width: 3 + - S: + access: rw + description: Source AHB master select + lsb: 24 + reset_value: '0' + width: 1 + - D: + access: rw + description: Destination AHB master select + lsb: 25 + reset_value: '0' + width: 1 + - SI: + access: rw + description: Source increment + lsb: 26 + reset_value: '0' + width: 1 + - DI: + access: rw + description: Destination increment + lsb: 27 + reset_value: '0' + width: 1 + - PROT1: + access: rw + description: This information is provided to the peripheral during a DMA bus + access and indicates that the access is in user mode or privileged mode + lsb: 28 + reset_value: '0' + width: 1 + - PROT2: + access: rw + description: This information is provided to the peripheral during a DMA bus + access and indicates to the peripheral that the access is bufferable or + not bufferable + lsb: 29 + reset_value: '0' + width: 1 + - PROT3: + access: rw + description: This information is provided to the peripheral during a DMA bus + access and indicates to the peripheral that the access is cacheable or not + cacheable + lsb: 30 + reset_value: '0' + width: 1 + - I: + access: rw + description: Terminal count interrupt enable bit + lsb: 31 + reset_value: '0' + width: 1 +- GPDMA_C7CONTROL: + fields: !!omap + - TRANSFERSIZE: + access: rw + description: Transfer size in number of transfers + lsb: 0 + reset_value: '0x00' + width: 12 + - SBSIZE: + access: rw + description: Source burst size + lsb: 12 + reset_value: '0x0' + width: 3 + - DBSIZE: + access: rw + description: Destination burst size + lsb: 15 + reset_value: '0x0' + width: 3 + - SWIDTH: + access: rw + description: Source transfer width + lsb: 18 + reset_value: '0x0' + width: 3 + - DWIDTH: + access: rw + description: Destination transfer width + lsb: 21 + reset_value: '0x0' + width: 3 + - S: + access: rw + description: Source AHB master select + lsb: 24 + reset_value: '0' + width: 1 + - D: + access: rw + description: Destination AHB master select + lsb: 25 + reset_value: '0' + width: 1 + - SI: + access: rw + description: Source increment + lsb: 26 + reset_value: '0' + width: 1 + - DI: + access: rw + description: Destination increment + lsb: 27 + reset_value: '0' + width: 1 + - PROT1: + access: rw + description: This information is provided to the peripheral during a DMA bus + access and indicates that the access is in user mode or privileged mode + lsb: 28 + reset_value: '0' + width: 1 + - PROT2: + access: rw + description: This information is provided to the peripheral during a DMA bus + access and indicates to the peripheral that the access is bufferable or + not bufferable + lsb: 29 + reset_value: '0' + width: 1 + - PROT3: + access: rw + description: This information is provided to the peripheral during a DMA bus + access and indicates to the peripheral that the access is cacheable or not + cacheable + lsb: 30 + reset_value: '0' + width: 1 + - I: + access: rw + description: Terminal count interrupt enable bit + lsb: 31 + reset_value: '0' + width: 1 +- GPDMA_C0CONFIG: + fields: !!omap + - E: + access: rw + description: Channel enable + lsb: 0 + reset_value: '0' + width: 1 + - SRCPERIPHERAL: + access: rw + description: Source peripheral + lsb: 1 + reset_value: '' + width: 5 + - DESTPERIPHERAL: + access: rw + description: Destination peripheral + lsb: 6 + reset_value: '' + width: 5 + - FLOWCNTRL: + access: rw + description: Flow control and transfer type + lsb: 11 + reset_value: '' + width: 3 + - IE: + access: rw + description: Interrupt error mask + lsb: 14 + reset_value: '' + width: 1 + - ITC: + access: rw + description: Terminal count interrupt mask + lsb: 15 + reset_value: '' + width: 1 + - L: + access: rw + description: Lock + lsb: 16 + reset_value: '' + width: 1 + - A: + access: r + description: Active + lsb: 17 + reset_value: '' + width: 1 + - H: + access: rw + description: Halt + lsb: 18 + reset_value: '' + width: 1 +- GPDMA_C1CONFIG: + fields: !!omap + - E: + access: rw + description: Channel enable + lsb: 0 + reset_value: '0' + width: 1 + - SRCPERIPHERAL: + access: rw + description: Source peripheral + lsb: 1 + reset_value: '' + width: 5 + - DESTPERIPHERAL: + access: rw + description: Destination peripheral + lsb: 6 + reset_value: '' + width: 5 + - FLOWCNTRL: + access: rw + description: Flow control and transfer type + lsb: 11 + reset_value: '' + width: 3 + - IE: + access: rw + description: Interrupt error mask + lsb: 14 + reset_value: '' + width: 1 + - ITC: + access: rw + description: Terminal count interrupt mask + lsb: 15 + reset_value: '' + width: 1 + - L: + access: rw + description: Lock + lsb: 16 + reset_value: '' + width: 1 + - A: + access: r + description: Active + lsb: 17 + reset_value: '' + width: 1 + - H: + access: rw + description: Halt + lsb: 18 + reset_value: '' + width: 1 +- GPDMA_C2CONFIG: + fields: !!omap + - E: + access: rw + description: Channel enable + lsb: 0 + reset_value: '0' + width: 1 + - SRCPERIPHERAL: + access: rw + description: Source peripheral + lsb: 1 + reset_value: '' + width: 5 + - DESTPERIPHERAL: + access: rw + description: Destination peripheral + lsb: 6 + reset_value: '' + width: 5 + - FLOWCNTRL: + access: rw + description: Flow control and transfer type + lsb: 11 + reset_value: '' + width: 3 + - IE: + access: rw + description: Interrupt error mask + lsb: 14 + reset_value: '' + width: 1 + - ITC: + access: rw + description: Terminal count interrupt mask + lsb: 15 + reset_value: '' + width: 1 + - L: + access: rw + description: Lock + lsb: 16 + reset_value: '' + width: 1 + - A: + access: r + description: Active + lsb: 17 + reset_value: '' + width: 1 + - H: + access: rw + description: Halt + lsb: 18 + reset_value: '' + width: 1 +- GPDMA_C3CONFIG: + fields: !!omap + - E: + access: rw + description: Channel enable + lsb: 0 + reset_value: '0' + width: 1 + - SRCPERIPHERAL: + access: rw + description: Source peripheral + lsb: 1 + reset_value: '' + width: 5 + - DESTPERIPHERAL: + access: rw + description: Destination peripheral + lsb: 6 + reset_value: '' + width: 5 + - FLOWCNTRL: + access: rw + description: Flow control and transfer type + lsb: 11 + reset_value: '' + width: 3 + - IE: + access: rw + description: Interrupt error mask + lsb: 14 + reset_value: '' + width: 1 + - ITC: + access: rw + description: Terminal count interrupt mask + lsb: 15 + reset_value: '' + width: 1 + - L: + access: rw + description: Lock + lsb: 16 + reset_value: '' + width: 1 + - A: + access: r + description: Active + lsb: 17 + reset_value: '' + width: 1 + - H: + access: rw + description: Halt + lsb: 18 + reset_value: '' + width: 1 +- GPDMA_C4CONFIG: + fields: !!omap + - E: + access: rw + description: Channel enable + lsb: 0 + reset_value: '0' + width: 1 + - SRCPERIPHERAL: + access: rw + description: Source peripheral + lsb: 1 + reset_value: '' + width: 5 + - DESTPERIPHERAL: + access: rw + description: Destination peripheral + lsb: 6 + reset_value: '' + width: 5 + - FLOWCNTRL: + access: rw + description: Flow control and transfer type + lsb: 11 + reset_value: '' + width: 3 + - IE: + access: rw + description: Interrupt error mask + lsb: 14 + reset_value: '' + width: 1 + - ITC: + access: rw + description: Terminal count interrupt mask + lsb: 15 + reset_value: '' + width: 1 + - L: + access: rw + description: Lock + lsb: 16 + reset_value: '' + width: 1 + - A: + access: r + description: Active + lsb: 17 + reset_value: '' + width: 1 + - H: + access: rw + description: Halt + lsb: 18 + reset_value: '' + width: 1 +- GPDMA_C5CONFIG: + fields: !!omap + - E: + access: rw + description: Channel enable + lsb: 0 + reset_value: '0' + width: 1 + - SRCPERIPHERAL: + access: rw + description: Source peripheral + lsb: 1 + reset_value: '' + width: 5 + - DESTPERIPHERAL: + access: rw + description: Destination peripheral + lsb: 6 + reset_value: '' + width: 5 + - FLOWCNTRL: + access: rw + description: Flow control and transfer type + lsb: 11 + reset_value: '' + width: 3 + - IE: + access: rw + description: Interrupt error mask + lsb: 14 + reset_value: '' + width: 1 + - ITC: + access: rw + description: Terminal count interrupt mask + lsb: 15 + reset_value: '' + width: 1 + - L: + access: rw + description: Lock + lsb: 16 + reset_value: '' + width: 1 + - A: + access: r + description: Active + lsb: 17 + reset_value: '' + width: 1 + - H: + access: rw + description: Halt + lsb: 18 + reset_value: '' + width: 1 +- GPDMA_C6CONFIG: + fields: !!omap + - E: + access: rw + description: Channel enable + lsb: 0 + reset_value: '0' + width: 1 + - SRCPERIPHERAL: + access: rw + description: Source peripheral + lsb: 1 + reset_value: '' + width: 5 + - DESTPERIPHERAL: + access: rw + description: Destination peripheral + lsb: 6 + reset_value: '' + width: 5 + - FLOWCNTRL: + access: rw + description: Flow control and transfer type + lsb: 11 + reset_value: '' + width: 3 + - IE: + access: rw + description: Interrupt error mask + lsb: 14 + reset_value: '' + width: 1 + - ITC: + access: rw + description: Terminal count interrupt mask + lsb: 15 + reset_value: '' + width: 1 + - L: + access: rw + description: Lock + lsb: 16 + reset_value: '' + width: 1 + - A: + access: r + description: Active + lsb: 17 + reset_value: '' + width: 1 + - H: + access: rw + description: Halt + lsb: 18 + reset_value: '' + width: 1 +- GPDMA_C7CONFIG: + fields: !!omap + - E: + access: rw + description: Channel enable + lsb: 0 + reset_value: '0' + width: 1 + - SRCPERIPHERAL: + access: rw + description: Source peripheral + lsb: 1 + reset_value: '' + width: 5 + - DESTPERIPHERAL: + access: rw + description: Destination peripheral + lsb: 6 + reset_value: '' + width: 5 + - FLOWCNTRL: + access: rw + description: Flow control and transfer type + lsb: 11 + reset_value: '' + width: 3 + - IE: + access: rw + description: Interrupt error mask + lsb: 14 + reset_value: '' + width: 1 + - ITC: + access: rw + description: Terminal count interrupt mask + lsb: 15 + reset_value: '' + width: 1 + - L: + access: rw + description: Lock + lsb: 16 + reset_value: '' + width: 1 + - A: + access: r + description: Active + lsb: 17 + reset_value: '' + width: 1 + - H: + access: rw + description: Halt + lsb: 18 + reset_value: '' + width: 1 diff --git a/libopencm3/scripts/data/lpc43xx/gpio.yaml b/libopencm3/scripts/data/lpc43xx/gpio.yaml new file mode 100644 index 0000000..b76e37f --- /dev/null +++ b/libopencm3/scripts/data/lpc43xx/gpio.yaml @@ -0,0 +1,4926 @@ +!!omap +- GPIO_PIN_INTERRUPT_ISEL: + fields: !!omap + - PMODE: + access: rw + description: Selects the interrupt mode for each pin interrupt + lsb: 0 + reset_value: '0' + width: 8 +- GPIO_PIN_INTERRUPT_IENR: + fields: !!omap + - ENRL: + access: rw + description: Enables the rising edge or level interrupt for each pin interrupt + lsb: 0 + reset_value: '0' + width: 8 +- GPIO_PIN_INTERRUPT_SIENR: + fields: !!omap + - SETENRL: + access: w + description: Ones written to this address set bits in the IENR, thus enabling + interrupts + lsb: 0 + reset_value: '' + width: 8 +- GPIO_PIN_INTERRUPT_CIENR: + fields: !!omap + - CENRL: + access: w + description: Ones written to this address clear bits in the IENR, thus disabling + the interrupts + lsb: 0 + reset_value: '' + width: 8 +- GPIO_PIN_INTERRUPT_IENF: + fields: !!omap + - ENAF: + access: rw + description: Enables the falling edge or configures the active level interrupt + for each pin interrupt + lsb: 0 + reset_value: '0' + width: 8 +- GPIO_PIN_INTERRUPT_SIENF: + fields: !!omap + - SETENAF: + access: w + description: Ones written to this address set bits in the IENF, thus enabling + interrupts + lsb: 0 + reset_value: '' + width: 8 +- GPIO_PIN_INTERRUPT_CIENF: + fields: !!omap + - CENAF: + access: w + description: Ones written to this address clears bits in the IENF, thus disabling + interrupts + lsb: 0 + reset_value: '' + width: 8 +- GPIO_PIN_INTERRUPT_RISE: + fields: !!omap + - RDET: + access: rw + description: Rising edge detect + lsb: 0 + reset_value: '0' + width: 8 +- GPIO_PIN_INTERRUPT_FALL: + fields: !!omap + - FDET: + access: rw + description: Falling edge detect + lsb: 0 + reset_value: '0' + width: 8 +- GPIO_PIN_INTERRUPT_IST: + fields: !!omap + - PSTAT: + access: rw + description: Pin interrupt status + lsb: 0 + reset_value: '0' + width: 8 +- GPIO_GROUP0_INTERRUPT_CTRL: + fields: !!omap + - INT: + access: rw + description: Group interrupt status + lsb: 0 + reset_value: '0' + width: 1 + - COMB: + access: rw + description: Combine enabled inputs for group interrupt + lsb: 1 + reset_value: '0' + width: 1 + - TRIG: + access: rw + description: Group interrupt trigger + lsb: 2 + reset_value: '0' + width: 1 +- GPIO_GROUP0_INTERRUPT_PORT_POL0: + fields: !!omap + - POL: + access: rw + description: Configure pin polarity of port 0 pins for group interrupt + lsb: 0 + reset_value: '1' + width: 32 +- GPIO_GROUP0_INTERRUPT_PORT_POL1: + fields: !!omap + - POL: + access: rw + description: Configure pin polarity of port 1 pins for group interrupt + lsb: 0 + reset_value: '1' + width: 32 +- GPIO_GROUP0_INTERRUPT_PORT_POL2: + fields: !!omap + - POL: + access: rw + description: Configure pin polarity of port 2 pins for group interrupt + lsb: 0 + reset_value: '1' + width: 32 +- GPIO_GROUP0_INTERRUPT_PORT_POL3: + fields: !!omap + - POL: + access: rw + description: Configure pin polarity of port 3 pins for group interrupt + lsb: 0 + reset_value: '1' + width: 32 +- GPIO_GROUP0_INTERRUPT_PORT_POL4: + fields: !!omap + - POL: + access: rw + description: Configure pin polarity of port 4 pins for group interrupt + lsb: 0 + reset_value: '1' + width: 32 +- GPIO_GROUP0_INTERRUPT_PORT_POL5: + fields: !!omap + - POL: + access: rw + description: Configure pin polarity of port 5 pins for group interrupt + lsb: 0 + reset_value: '1' + width: 32 +- GPIO_GROUP0_INTERRUPT_PORT_POL6: + fields: !!omap + - POL: + access: rw + description: Configure pin polarity of port 6 pins for group interrupt + lsb: 0 + reset_value: '1' + width: 32 +- GPIO_GROUP0_INTERRUPT_PORT_POL7: + fields: !!omap + - POL: + access: rw + description: Configure pin polarity of port 7 pins for group interrupt + lsb: 0 + reset_value: '1' + width: 32 +- GPIO_GROUP0_INTERRUPT_PORT_ENA0: + fields: !!omap + - ENA: + access: rw + description: Enable port 0 pin for group interrupt + lsb: 0 + reset_value: '0' + width: 32 +- GPIO_GROUP0_INTERRUPT_PORT_ENA1: + fields: !!omap + - ENA: + access: rw + description: Enable port 1 pin for group interrupt + lsb: 0 + reset_value: '0' + width: 32 +- GPIO_GROUP0_INTERRUPT_PORT_ENA2: + fields: !!omap + - ENA: + access: rw + description: Enable port 2 pin for group interrupt + lsb: 0 + reset_value: '0' + width: 32 +- GPIO_GROUP0_INTERRUPT_PORT_ENA3: + fields: !!omap + - ENA: + access: rw + description: Enable port 3 pin for group interrupt + lsb: 0 + reset_value: '0' + width: 32 +- GPIO_GROUP0_INTERRUPT_PORT_ENA4: + fields: !!omap + - ENA: + access: rw + description: Enable port 4 pin for group interrupt + lsb: 0 + reset_value: '0' + width: 32 +- GPIO_GROUP0_INTERRUPT_PORT_ENA5: + fields: !!omap + - ENA: + access: rw + description: Enable port 5 pin for group interrupt + lsb: 0 + reset_value: '0' + width: 32 +- GPIO_GROUP0_INTERRUPT_PORT_ENA6: + fields: !!omap + - ENA: + access: rw + description: Enable port 6 pin for group interrupt + lsb: 0 + reset_value: '0' + width: 32 +- GPIO_GROUP0_INTERRUPT_PORT_ENA7: + fields: !!omap + - ENA: + access: rw + description: Enable port 7 pin for group interrupt + lsb: 0 + reset_value: '0' + width: 32 +- GPIO_GROUP1_INTERRUPT_CTRL: + fields: !!omap + - INT: + access: rw + description: Group interrupt status + lsb: 0 + reset_value: '0' + width: 1 + - COMB: + access: rw + description: Combine enabled inputs for group interrupt + lsb: 1 + reset_value: '0' + width: 1 + - TRIG: + access: rw + description: Group interrupt trigger + lsb: 2 + reset_value: '0' + width: 1 +- GPIO_GROUP1_INTERRUPT_PORT_POL0: + fields: !!omap + - POL: + access: rw + description: Configure pin polarity of port 0 pins for group interrupt + lsb: 0 + reset_value: '1' + width: 32 +- GPIO_GROUP1_INTERRUPT_PORT_POL1: + fields: !!omap + - POL: + access: rw + description: Configure pin polarity of port 1 pins for group interrupt + lsb: 0 + reset_value: '1' + width: 32 +- GPIO_GROUP1_INTERRUPT_PORT_POL2: + fields: !!omap + - POL: + access: rw + description: Configure pin polarity of port 2 pins for group interrupt + lsb: 0 + reset_value: '1' + width: 32 +- GPIO_GROUP1_INTERRUPT_PORT_POL3: + fields: !!omap + - POL: + access: rw + description: Configure pin polarity of port 3 pins for group interrupt + lsb: 0 + reset_value: '1' + width: 32 +- GPIO_GROUP1_INTERRUPT_PORT_POL4: + fields: !!omap + - POL: + access: rw + description: Configure pin polarity of port 4 pins for group interrupt + lsb: 0 + reset_value: '1' + width: 32 +- GPIO_GROUP1_INTERRUPT_PORT_POL5: + fields: !!omap + - POL: + access: rw + description: Configure pin polarity of port 5 pins for group interrupt + lsb: 0 + reset_value: '1' + width: 32 +- GPIO_GROUP1_INTERRUPT_PORT_POL6: + fields: !!omap + - POL: + access: rw + description: Configure pin polarity of port 6 pins for group interrupt + lsb: 0 + reset_value: '1' + width: 32 +- GPIO_GROUP1_INTERRUPT_PORT_POL7: + fields: !!omap + - POL: + access: rw + description: Configure pin polarity of port 7 pins for group interrupt + lsb: 0 + reset_value: '1' + width: 32 +- GPIO_GROUP1_INTERRUPT_PORT_ENA0: + fields: !!omap + - ENA: + access: rw + description: Enable port 0 pin for group interrupt + lsb: 0 + reset_value: '0' + width: 32 +- GPIO_GROUP1_INTERRUPT_PORT_ENA1: + fields: !!omap + - ENA: + access: rw + description: Enable port 1 pin for group interrupt + lsb: 0 + reset_value: '0' + width: 32 +- GPIO_GROUP1_INTERRUPT_PORT_ENA2: + fields: !!omap + - ENA: + access: rw + description: Enable port 2 pin for group interrupt + lsb: 0 + reset_value: '0' + width: 32 +- GPIO_GROUP1_INTERRUPT_PORT_ENA3: + fields: !!omap + - ENA: + access: rw + description: Enable port 3 pin for group interrupt + lsb: 0 + reset_value: '0' + width: 32 +- GPIO_GROUP1_INTERRUPT_PORT_ENA4: + fields: !!omap + - ENA: + access: rw + description: Enable port 4 pin for group interrupt + lsb: 0 + reset_value: '0' + width: 32 +- GPIO_GROUP1_INTERRUPT_PORT_ENA5: + fields: !!omap + - ENA: + access: rw + description: Enable port 5 pin for group interrupt + lsb: 0 + reset_value: '0' + width: 32 +- GPIO_GROUP1_INTERRUPT_PORT_ENA6: + fields: !!omap + - ENA: + access: rw + description: Enable port 6 pin for group interrupt + lsb: 0 + reset_value: '0' + width: 32 +- GPIO_GROUP1_INTERRUPT_PORT_ENA7: + fields: !!omap + - ENA: + access: rw + description: Enable port 7 pin for group interrupt + lsb: 0 + reset_value: '0' + width: 32 +- GPIO_B0: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B1: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B2: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B3: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B4: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B5: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B6: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B7: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B8: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B9: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B10: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B11: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B12: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B13: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B14: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B15: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B16: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B17: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B18: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B19: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B20: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B21: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B22: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B23: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B24: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B25: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B26: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B27: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B28: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B29: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B30: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B31: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B32: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B33: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B34: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B35: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B36: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B37: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B38: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B39: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B40: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B41: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B42: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B43: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B44: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B45: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B46: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B47: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B48: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B49: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B50: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B51: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B52: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B53: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B54: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B55: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B56: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B57: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B58: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B59: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B60: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B61: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B62: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B63: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B64: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B65: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B66: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B67: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B68: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B69: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B70: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B71: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B72: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B73: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B74: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B75: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B76: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B77: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B78: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B79: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B80: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B81: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B82: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B83: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B84: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B85: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B86: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B87: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B88: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B89: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B90: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B91: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B92: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B93: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B94: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B95: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B96: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B97: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B98: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B99: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B100: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B101: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B102: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B103: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B104: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B105: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B106: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B107: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B108: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B109: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B110: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B111: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B112: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B113: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B114: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B115: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B116: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B117: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B118: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B119: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B120: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B121: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B122: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B123: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B124: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B125: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B126: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B127: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B128: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B129: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B130: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B131: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B132: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B133: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B134: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B135: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B136: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B137: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B138: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B139: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B140: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B141: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B142: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B143: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B144: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B145: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B146: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B147: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B148: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B149: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B150: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B151: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B152: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B153: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B154: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B155: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B156: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B157: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B158: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B159: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B160: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B161: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B162: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B163: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B164: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B165: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B166: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B167: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B168: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B169: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B170: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B171: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B172: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B173: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B174: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B175: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B176: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B177: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B178: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B179: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B180: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B181: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B182: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B183: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B184: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B185: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B186: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B187: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B188: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B189: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B190: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B191: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B192: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B193: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B194: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B195: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B196: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B197: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B198: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B199: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B200: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B201: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B202: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B203: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B204: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B205: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B206: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B207: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B208: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B209: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B210: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B211: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B212: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B213: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B214: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B215: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B216: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B217: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B218: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B219: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B220: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B221: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B222: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B223: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B224: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B225: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B226: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B227: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B228: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B229: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B230: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B231: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B232: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B233: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B234: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B235: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B236: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B237: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B238: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B239: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B240: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B241: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B242: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B243: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B244: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B245: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B246: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B247: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B248: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B249: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B250: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B251: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B252: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B253: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B254: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_B255: + fields: !!omap + - PBYTE: + access: rw + description: GPIO port byte pin register + lsb: 0 + reset_value: '' + width: 1 +- GPIO_W0: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W1: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W2: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W3: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W4: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W5: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W6: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W7: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W8: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W9: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W10: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W11: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W12: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W13: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W14: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W15: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W16: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W17: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W18: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W19: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W20: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W21: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W22: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W23: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W24: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W25: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W26: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W27: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W28: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W29: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W30: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W31: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W32: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W33: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W34: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W35: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W36: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W37: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W38: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W39: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W40: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W41: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W42: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W43: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W44: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W45: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W46: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W47: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W48: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W49: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W50: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W51: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W52: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W53: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W54: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W55: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W56: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W57: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W58: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W59: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W60: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W61: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W62: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W63: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W64: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W65: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W66: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W67: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W68: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W69: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W70: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W71: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W72: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W73: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W74: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W75: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W76: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W77: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W78: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W79: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W80: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W81: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W82: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W83: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W84: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W85: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W86: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W87: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W88: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W89: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W90: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W91: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W92: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W93: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W94: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W95: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W96: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W97: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W98: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W99: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W100: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W101: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W102: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W103: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W104: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W105: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W106: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W107: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W108: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W109: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W110: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W111: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W112: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W113: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W114: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W115: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W116: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W117: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W118: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W119: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W120: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W121: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W122: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W123: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W124: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W125: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W126: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W127: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W128: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W129: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W130: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W131: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W132: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W133: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W134: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W135: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W136: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W137: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W138: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W139: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W140: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W141: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W142: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W143: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W144: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W145: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W146: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W147: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W148: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W149: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W150: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W151: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W152: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W153: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W154: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W155: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W156: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W157: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W158: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W159: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W160: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W161: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W162: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W163: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W164: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W165: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W166: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W167: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W168: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W169: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W170: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W171: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W172: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W173: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W174: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W175: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W176: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W177: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W178: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W179: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W180: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W181: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W182: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W183: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W184: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W185: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W186: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W187: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W188: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W189: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W190: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W191: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W192: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W193: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W194: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W195: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W196: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W197: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W198: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W199: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W200: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W201: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W202: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W203: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W204: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W205: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W206: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W207: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W208: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W209: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W210: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W211: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W212: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W213: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W214: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W215: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W216: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W217: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W218: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W219: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W220: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W221: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W222: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W223: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W224: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W225: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W226: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W227: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W228: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W229: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W230: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W231: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W232: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W233: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W234: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W235: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W236: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W237: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W238: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W239: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W240: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W241: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W242: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W243: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W244: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W245: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W246: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W247: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W248: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W249: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W250: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W251: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W252: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W253: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W254: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO_W255: + fields: !!omap + - PWORD: + access: rw + description: GPIO port word pin register + lsb: 0 + reset_value: '' + width: 32 +- GPIO0_DIR: + fields: !!omap + - DIR: + access: rw + description: Selects pin direction for GPIO0 + lsb: 0 + reset_value: '0' + width: 32 +- GPIO1_DIR: + fields: !!omap + - DIR: + access: rw + description: Selects pin direction for GPIO1 + lsb: 0 + reset_value: '0' + width: 32 +- GPIO2_DIR: + fields: !!omap + - DIR: + access: rw + description: Selects pin direction for GPIO2 + lsb: 0 + reset_value: '0' + width: 32 +- GPIO3_DIR: + fields: !!omap + - DIR: + access: rw + description: Selects pin direction for GPIO3 + lsb: 0 + reset_value: '0' + width: 32 +- GPIO4_DIR: + fields: !!omap + - DIR: + access: rw + description: Selects pin direction for GPIO4 + lsb: 0 + reset_value: '0' + width: 32 +- GPIO5_DIR: + fields: !!omap + - DIR: + access: rw + description: Selects pin direction for GPIO5 + lsb: 0 + reset_value: '0' + width: 32 +- GPIO6_DIR: + fields: !!omap + - DIR: + access: rw + description: Selects pin direction for GPIO6 + lsb: 0 + reset_value: '0' + width: 32 +- GPIO7_DIR: + fields: !!omap + - DIR: + access: rw + description: Selects pin direction for GPIO7 + lsb: 0 + reset_value: '0' + width: 32 +- GPIO0_MASK: + fields: !!omap + - MASK: + access: rw + description: Controls which pins are active in the MPORT register + lsb: 0 + reset_value: '0' + width: 32 +- GPIO1_MASK: + fields: !!omap + - MASK: + access: rw + description: Controls which pins are active in the MPORT register + lsb: 0 + reset_value: '0' + width: 32 +- GPIO2_MASK: + fields: !!omap + - MASK: + access: rw + description: Controls which pins are active in the MPORT register + lsb: 0 + reset_value: '0' + width: 32 +- GPIO3_MASK: + fields: !!omap + - MASK: + access: rw + description: Controls which pins are active in the MPORT register + lsb: 0 + reset_value: '0' + width: 32 +- GPIO4_MASK: + fields: !!omap + - MASK: + access: rw + description: Controls which pins are active in the MPORT register + lsb: 0 + reset_value: '0' + width: 32 +- GPIO5_MASK: + fields: !!omap + - MASK: + access: rw + description: Controls which pins are active in the MPORT register + lsb: 0 + reset_value: '0' + width: 32 +- GPIO6_MASK: + fields: !!omap + - MASK: + access: rw + description: Controls which pins are active in the MPORT register + lsb: 0 + reset_value: '0' + width: 32 +- GPIO7_MASK: + fields: !!omap + - MASK: + access: rw + description: Controls which pins are active in the MPORT register + lsb: 0 + reset_value: '0' + width: 32 +- GPIO0_PIN: + fields: !!omap + - PORT: + access: rw + description: Reads pin states or loads output bits + lsb: 0 + reset_value: '' + width: 32 +- GPIO1_PIN: + fields: !!omap + - PORT: + access: rw + description: Reads pin states or loads output bits + lsb: 0 + reset_value: '' + width: 32 +- GPIO2_PIN: + fields: !!omap + - PORT: + access: rw + description: Reads pin states or loads output bits + lsb: 0 + reset_value: '' + width: 32 +- GPIO3_PIN: + fields: !!omap + - PORT: + access: rw + description: Reads pin states or loads output bits + lsb: 0 + reset_value: '' + width: 32 +- GPIO4_PIN: + fields: !!omap + - PORT: + access: rw + description: Reads pin states or loads output bits + lsb: 0 + reset_value: '' + width: 32 +- GPIO5_PIN: + fields: !!omap + - PORT: + access: rw + description: Reads pin states or loads output bits + lsb: 0 + reset_value: '' + width: 32 +- GPIO6_PIN: + fields: !!omap + - PORT: + access: rw + description: Reads pin states or loads output bits + lsb: 0 + reset_value: '' + width: 32 +- GPIO7_PIN: + fields: !!omap + - PORT: + access: rw + description: Reads pin states or loads output bits + lsb: 0 + reset_value: '' + width: 32 +- GPIO0_MPIN: + fields: !!omap + - MPORT: + access: rw + description: Masked port register + lsb: 0 + reset_value: '' + width: 32 +- GPIO1_MPIN: + fields: !!omap + - MPORT: + access: rw + description: Masked port register + lsb: 0 + reset_value: '' + width: 32 +- GPIO2_MPIN: + fields: !!omap + - MPORT: + access: rw + description: Masked port register + lsb: 0 + reset_value: '' + width: 32 +- GPIO3_MPIN: + fields: !!omap + - MPORT: + access: rw + description: Masked port register + lsb: 0 + reset_value: '' + width: 32 +- GPIO4_MPIN: + fields: !!omap + - MPORT: + access: rw + description: Masked port register + lsb: 0 + reset_value: '' + width: 32 +- GPIO5_MPIN: + fields: !!omap + - MPORT: + access: rw + description: Masked port register + lsb: 0 + reset_value: '' + width: 32 +- GPIO6_MPIN: + fields: !!omap + - MPORT: + access: rw + description: Masked port register + lsb: 0 + reset_value: '' + width: 32 +- GPIO7_MPIN: + fields: !!omap + - MPORT: + access: rw + description: Masked port register + lsb: 0 + reset_value: '' + width: 32 +- GPIO0_SET: + fields: !!omap + - SET: + access: rw + description: Read or set output bits + lsb: 0 + reset_value: '0' + width: 32 +- GPIO1_SET: + fields: !!omap + - SET: + access: rw + description: Read or set output bits + lsb: 0 + reset_value: '0' + width: 32 +- GPIO2_SET: + fields: !!omap + - SET: + access: rw + description: Read or set output bits + lsb: 0 + reset_value: '0' + width: 32 +- GPIO3_SET: + fields: !!omap + - SET: + access: rw + description: Read or set output bits + lsb: 0 + reset_value: '0' + width: 32 +- GPIO4_SET: + fields: !!omap + - SET: + access: rw + description: Read or set output bits + lsb: 0 + reset_value: '0' + width: 32 +- GPIO5_SET: + fields: !!omap + - SET: + access: rw + description: Read or set output bits + lsb: 0 + reset_value: '0' + width: 32 +- GPIO6_SET: + fields: !!omap + - SET: + access: rw + description: Read or set output bits + lsb: 0 + reset_value: '0' + width: 32 +- GPIO7_SET: + fields: !!omap + - SET: + access: rw + description: Read or set output bits + lsb: 0 + reset_value: '0' + width: 32 +- GPIO0_CLR: + fields: !!omap + - CLR: + access: w + description: Clear output bits + lsb: 0 + reset_value: '' + width: 32 +- GPIO1_CLR: + fields: !!omap + - CLR: + access: w + description: Clear output bits + lsb: 0 + reset_value: '' + width: 32 +- GPIO2_CLR: + fields: !!omap + - CLR: + access: w + description: Clear output bits + lsb: 0 + reset_value: '' + width: 32 +- GPIO3_CLR: + fields: !!omap + - CLR: + access: w + description: Clear output bits + lsb: 0 + reset_value: '' + width: 32 +- GPIO4_CLR: + fields: !!omap + - CLR: + access: w + description: Clear output bits + lsb: 0 + reset_value: '' + width: 32 +- GPIO5_CLR: + fields: !!omap + - CLR: + access: w + description: Clear output bits + lsb: 0 + reset_value: '' + width: 32 +- GPIO6_CLR: + fields: !!omap + - CLR: + access: w + description: Clear output bits + lsb: 0 + reset_value: '' + width: 32 +- GPIO7_CLR: + fields: !!omap + - CLR: + access: w + description: Clear output bits + lsb: 0 + reset_value: '' + width: 32 +- GPIO0_NOT: + fields: !!omap + - NOT: + access: w + description: Toggle output bits + lsb: 0 + reset_value: '' + width: 32 +- GPIO1_NOT: + fields: !!omap + - NOT: + access: w + description: Toggle output bits + lsb: 0 + reset_value: '' + width: 32 +- GPIO2_NOT: + fields: !!omap + - NOT: + access: w + description: Toggle output bits + lsb: 0 + reset_value: '' + width: 32 +- GPIO3_NOT: + fields: !!omap + - NOT: + access: w + description: Toggle output bits + lsb: 0 + reset_value: '' + width: 32 +- GPIO4_NOT: + fields: !!omap + - NOT: + access: w + description: Toggle output bits + lsb: 0 + reset_value: '' + width: 32 +- GPIO5_NOT: + fields: !!omap + - NOT: + access: w + description: Toggle output bits + lsb: 0 + reset_value: '' + width: 32 +- GPIO6_NOT: + fields: !!omap + - NOT: + access: w + description: Toggle output bits + lsb: 0 + reset_value: '' + width: 32 +- GPIO7_NOT: + fields: !!omap + - NOT: + access: w + description: Toggle output bits + lsb: 0 + reset_value: '' + width: 32 diff --git a/libopencm3/scripts/data/lpc43xx/i2c.yaml b/libopencm3/scripts/data/lpc43xx/i2c.yaml new file mode 100644 index 0000000..0e59a6a --- /dev/null +++ b/libopencm3/scripts/data/lpc43xx/i2c.yaml @@ -0,0 +1,415 @@ +!!omap +- I2C0_CONSET: + fields: !!omap + - AA: + access: rw + description: Assert acknowledge flag + lsb: 2 + reset_value: '0' + width: 1 + - SI: + access: rw + description: I2C interrupt flag + lsb: 3 + reset_value: '0' + width: 1 + - STO: + access: rw + description: STOP flag + lsb: 4 + reset_value: '0' + width: 1 + - STA: + access: rw + description: START flag + lsb: 5 + reset_value: '0' + width: 1 + - I2EN: + access: rw + description: I2C interface enable + lsb: 6 + reset_value: '0' + width: 1 +- I2C1_CONSET: + fields: !!omap + - AA: + access: rw + description: Assert acknowledge flag + lsb: 2 + reset_value: '0' + width: 1 + - SI: + access: rw + description: I2C interrupt flag + lsb: 3 + reset_value: '0' + width: 1 + - STO: + access: rw + description: STOP flag + lsb: 4 + reset_value: '0' + width: 1 + - STA: + access: rw + description: START flag + lsb: 5 + reset_value: '0' + width: 1 + - I2EN: + access: rw + description: I2C interface enable + lsb: 6 + reset_value: '0' + width: 1 +- I2C0_STAT: + fields: !!omap + - STATUS: + access: r + description: These bits give the actual status information about the I2C interface + lsb: 3 + reset_value: '0x1f' + width: 5 +- I2C1_STAT: + fields: !!omap + - STATUS: + access: r + description: These bits give the actual status information about the I2C interface + lsb: 3 + reset_value: '0x1f' + width: 5 +- I2C0_DAT: + fields: !!omap + - DATA: + access: rw + description: This register holds data values that have been received or are + to be transmitted + lsb: 0 + reset_value: '0' + width: 8 +- I2C1_DAT: + fields: !!omap + - DATA: + access: rw + description: This register holds data values that have been received or are + to be transmitted + lsb: 0 + reset_value: '0' + width: 8 +- I2C0_ADR0: + fields: !!omap + - GC: + access: rw + description: General Call enable bit + lsb: 0 + reset_value: '0' + width: 1 + - ADDRESS: + access: rw + description: The I2C device address for slave mode + lsb: 1 + reset_value: '0' + width: 7 +- I2C1_ADR0: + fields: !!omap + - GC: + access: rw + description: General Call enable bit + lsb: 0 + reset_value: '0' + width: 1 + - ADDRESS: + access: rw + description: The I2C device address for slave mode + lsb: 1 + reset_value: '0' + width: 7 +- I2C0_SCLH: + fields: !!omap + - SCLH: + access: rw + description: Count for SCL HIGH time period selection + lsb: 0 + reset_value: '0x0004' + width: 16 +- I2C1_SCLH: + fields: !!omap + - SCLH: + access: rw + description: Count for SCL HIGH time period selection + lsb: 0 + reset_value: '0x0004' + width: 16 +- I2C0_SCLL: + fields: !!omap + - SCLL: + access: rw + description: Count for SCL LOW time period selection + lsb: 0 + reset_value: '0x0004' + width: 16 +- I2C1_SCLL: + fields: !!omap + - SCLL: + access: rw + description: Count for SCL LOW time period selection + lsb: 0 + reset_value: '0x0004' + width: 16 +- I2C0_CONCLR: + fields: !!omap + - AAC: + access: w + description: Assert acknowledge Clear bit + lsb: 2 + reset_value: '0' + width: 1 + - SIC: + access: w + description: I2C interrupt Clear bit + lsb: 3 + reset_value: '0' + width: 1 + - STAC: + access: w + description: START flag Clear bit + lsb: 5 + reset_value: '0' + width: 1 + - I2ENC: + access: w + description: I2C interface Disable bit + lsb: 6 + reset_value: '0' + width: 1 +- I2C1_CONCLR: + fields: !!omap + - AAC: + access: w + description: Assert acknowledge Clear bit + lsb: 2 + reset_value: '0' + width: 1 + - SIC: + access: w + description: I2C interrupt Clear bit + lsb: 3 + reset_value: '0' + width: 1 + - STAC: + access: w + description: START flag Clear bit + lsb: 5 + reset_value: '0' + width: 1 + - I2ENC: + access: w + description: I2C interface Disable bit + lsb: 6 + reset_value: '0' + width: 1 +- I2C0_MMCTRL: + fields: !!omap + - MM_ENA: + access: rw + description: Monitor mode enable + lsb: 0 + reset_value: '0' + width: 1 + - ENA_SCL: + access: rw + description: SCL output enable + lsb: 1 + reset_value: '0' + width: 1 + - MATCH_ALL: + access: rw + description: Select interrupt register match + lsb: 2 + reset_value: '0' + width: 1 +- I2C1_MMCTRL: + fields: !!omap + - MM_ENA: + access: rw + description: Monitor mode enable + lsb: 0 + reset_value: '0' + width: 1 + - ENA_SCL: + access: rw + description: SCL output enable + lsb: 1 + reset_value: '0' + width: 1 + - MATCH_ALL: + access: rw + description: Select interrupt register match + lsb: 2 + reset_value: '0' + width: 1 +- I2C0_ADR1: + fields: !!omap + - GC: + access: rw + description: General Call enable bit + lsb: 0 + reset_value: '0' + width: 1 + - ADDRESS: + access: rw + description: The I2C device address for slave mode + lsb: 1 + reset_value: '0' + width: 7 +- I2C1_ADR1: + fields: !!omap + - GC: + access: rw + description: General Call enable bit + lsb: 0 + reset_value: '0' + width: 1 + - ADDRESS: + access: rw + description: The I2C device address for slave mode + lsb: 1 + reset_value: '0' + width: 7 +- I2C0_ADR2: + fields: !!omap + - GC: + access: rw + description: General Call enable bit + lsb: 0 + reset_value: '0' + width: 1 + - ADDRESS: + access: rw + description: The I2C device address for slave mode + lsb: 1 + reset_value: '0' + width: 7 +- I2C1_ADR2: + fields: !!omap + - GC: + access: rw + description: General Call enable bit + lsb: 0 + reset_value: '0' + width: 1 + - ADDRESS: + access: rw + description: The I2C device address for slave mode + lsb: 1 + reset_value: '0' + width: 7 +- I2C0_ADR3: + fields: !!omap + - GC: + access: rw + description: General Call enable bit + lsb: 0 + reset_value: '0' + width: 1 + - ADDRESS: + access: rw + description: The I2C device address for slave mode + lsb: 1 + reset_value: '0' + width: 7 +- I2C1_ADR3: + fields: !!omap + - GC: + access: rw + description: General Call enable bit + lsb: 0 + reset_value: '0' + width: 1 + - ADDRESS: + access: rw + description: The I2C device address for slave mode + lsb: 1 + reset_value: '0' + width: 7 +- I2C0_DATA_BUFFER: + fields: !!omap + - DATA: + access: r + description: This register holds contents of the 8 MSBs of the DAT shift register + lsb: 0 + reset_value: '0' + width: 8 +- I2C1_DATA_BUFFER: + fields: !!omap + - DATA: + access: r + description: This register holds contents of the 8 MSBs of the DAT shift register + lsb: 0 + reset_value: '0' + width: 8 +- I2C0_MASK0: + fields: !!omap + - MASK: + access: rw + description: Mask bits + lsb: 1 + reset_value: '0' + width: 7 +- I2C1_MASK0: + fields: !!omap + - MASK: + access: rw + description: Mask bits + lsb: 1 + reset_value: '0' + width: 7 +- I2C0_MASK1: + fields: !!omap + - MASK: + access: rw + description: Mask bits + lsb: 1 + reset_value: '0' + width: 7 +- I2C1_MASK1: + fields: !!omap + - MASK: + access: rw + description: Mask bits + lsb: 1 + reset_value: '0' + width: 7 +- I2C0_MASK2: + fields: !!omap + - MASK: + access: rw + description: Mask bits + lsb: 1 + reset_value: '0' + width: 7 +- I2C1_MASK2: + fields: !!omap + - MASK: + access: rw + description: Mask bits + lsb: 1 + reset_value: '0' + width: 7 +- I2C0_MASK3: + fields: !!omap + - MASK: + access: rw + description: Mask bits + lsb: 1 + reset_value: '0' + width: 7 +- I2C1_MASK3: + fields: !!omap + - MASK: + access: rw + description: Mask bits + lsb: 1 + reset_value: '0' + width: 7 diff --git a/libopencm3/scripts/data/lpc43xx/i2s.yaml b/libopencm3/scripts/data/lpc43xx/i2s.yaml new file mode 100644 index 0000000..833e5b5 --- /dev/null +++ b/libopencm3/scripts/data/lpc43xx/i2s.yaml @@ -0,0 +1,619 @@ +!!omap +- I2S0_DAO: + fields: !!omap + - WORDWIDTH: + access: rw + description: Selects the number of bytes in data + lsb: 0 + reset_value: '1' + width: 2 + - MONO: + access: rw + description: When 1, data is of monaural format. When 0, the data is in stereo + format + lsb: 2 + reset_value: '0' + width: 1 + - STOP: + access: rw + description: When 1, disables accesses on FIFOs, places the transmit channel + in mute mode + lsb: 3 + reset_value: '0' + width: 1 + - RESET: + access: rw + description: When 1, asynchronously resets the transmit channel and FIFO + lsb: 4 + reset_value: '0' + width: 1 + - WS_SEL: + access: rw + description: When 0, the interface is in master mode. When 1, the interface + is in slave mode + lsb: 5 + reset_value: '1' + width: 1 + - WS_HALFPERIOD: + access: rw + description: Word select half period minus 1, i.e. WS 64clk period -> ws_halfperiod + = 31. + lsb: 6 + reset_value: '0x1f' + width: 9 + - MUTE: + access: rw + description: When 1, the transmit channel sends only zeroes + lsb: 15 + reset_value: '1' + width: 1 +- I2S1_DAO: + fields: !!omap + - WORDWIDTH: + access: rw + description: Selects the number of bytes in data + lsb: 0 + reset_value: '1' + width: 2 + - MONO: + access: rw + description: When 1, data is of monaural format. When 0, the data is in stereo + format + lsb: 2 + reset_value: '0' + width: 1 + - STOP: + access: rw + description: When 1, disables accesses on FIFOs, places the transmit channel + in mute mode + lsb: 3 + reset_value: '0' + width: 1 + - RESET: + access: rw + description: When 1, asynchronously resets the transmit channel and FIFO + lsb: 4 + reset_value: '0' + width: 1 + - WS_SEL: + access: rw + description: When 0, the interface is in master mode. When 1, the interface + is in slave mode + lsb: 5 + reset_value: '1' + width: 1 + - WS_HALFPERIOD: + access: rw + description: Word select half period minus 1, i.e. WS 64clk period -> ws_halfperiod + = 31. + lsb: 6 + reset_value: '0x1f' + width: 9 + - MUTE: + access: rw + description: When 1, the transmit channel sends only zeroes + lsb: 15 + reset_value: '1' + width: 1 +- I2S0_DAI: + fields: !!omap + - WORDWIDTH: + access: rw + description: Selects the number of bytes in data + lsb: 0 + reset_value: '1' + width: 2 + - MONO: + access: rw + description: When 1, data is of monaural format. When 0, the data is in stereo + format + lsb: 2 + reset_value: '0' + width: 1 + - STOP: + access: rw + description: When 1, disables accesses on FIFOs, places the transmit channel + in mute mode + lsb: 3 + reset_value: '0' + width: 1 + - RESET: + access: rw + description: When 1, asynchronously resets the transmit channel and FIFO + lsb: 4 + reset_value: '0' + width: 1 + - WS_SEL: + access: rw + description: When 0, the interface is in master mode. When 1, the interface + is in slave mode + lsb: 5 + reset_value: '1' + width: 1 + - WS_HALFPERIOD: + access: rw + description: Word select half period minus 1, i.e. WS 64clk period -> ws_halfperiod + = 31. + lsb: 6 + reset_value: '0x1f' + width: 9 + - MUTE: + access: rw + description: When 1, the transmit channel sends only zeroes + lsb: 15 + reset_value: '1' + width: 1 +- I2S1_DAI: + fields: !!omap + - WORDWIDTH: + access: rw + description: Selects the number of bytes in data + lsb: 0 + reset_value: '1' + width: 2 + - MONO: + access: rw + description: When 1, data is of monaural format. When 0, the data is in stereo + format + lsb: 2 + reset_value: '0' + width: 1 + - STOP: + access: rw + description: When 1, disables accesses on FIFOs, places the transmit channel + in mute mode + lsb: 3 + reset_value: '0' + width: 1 + - RESET: + access: rw + description: When 1, asynchronously resets the transmit channel and FIFO + lsb: 4 + reset_value: '0' + width: 1 + - WS_SEL: + access: rw + description: When 0, the interface is in master mode. When 1, the interface + is in slave mode + lsb: 5 + reset_value: '1' + width: 1 + - WS_HALFPERIOD: + access: rw + description: Word select half period minus 1, i.e. WS 64clk period -> ws_halfperiod + = 31. + lsb: 6 + reset_value: '0x1f' + width: 9 + - MUTE: + access: rw + description: When 1, the transmit channel sends only zeroes + lsb: 15 + reset_value: '1' + width: 1 +- I2S0_TXFIFO: + fields: !!omap + - I2STXFIFO: + access: w + description: 8 x 32-bit transmit FIFO + lsb: 0 + reset_value: '0' + width: 32 +- I2S1_TXFIFO: + fields: !!omap + - I2STXFIFO: + access: w + description: 8 x 32-bit transmit FIFO + lsb: 0 + reset_value: '0' + width: 32 +- I2S0_RXFIFO: + fields: !!omap + - I2SRXFIFO: + access: r + description: 8 x 32-bit receive FIFO + lsb: 0 + reset_value: '0' + width: 32 +- I2S1_RXFIFO: + fields: !!omap + - I2SRXFIFO: + access: r + description: 8 x 32-bit receive FIFO + lsb: 0 + reset_value: '0' + width: 32 +- I2S0_STATE: + fields: !!omap + - IRQ: + access: r + description: This bit reflects the presence of Receive Interrupt or Transmit + Interrupt + lsb: 0 + reset_value: '1' + width: 1 + - DMAREQ1: + access: r + description: This bit reflects the presence of Receive or Transmit DMA Request + 1 + lsb: 1 + reset_value: '1' + width: 1 + - DMAREQ2: + access: r + description: This bit reflects the presence of Receive or Transmit DMA Request + 2 + lsb: 2 + reset_value: '1' + width: 1 + - RX_LEVEL: + access: r + description: Reflects the current level of the Receive FIFO + lsb: 8 + reset_value: '0' + width: 4 + - TX_LEVEL: + access: r + description: Reflects the current level of the Transmit FIFO + lsb: 16 + reset_value: '0' + width: 4 +- I2S1_STATE: + fields: !!omap + - IRQ: + access: r + description: This bit reflects the presence of Receive Interrupt or Transmit + Interrupt + lsb: 0 + reset_value: '1' + width: 1 + - DMAREQ1: + access: r + description: This bit reflects the presence of Receive or Transmit DMA Request + 1 + lsb: 1 + reset_value: '1' + width: 1 + - DMAREQ2: + access: r + description: This bit reflects the presence of Receive or Transmit DMA Request + 2 + lsb: 2 + reset_value: '1' + width: 1 + - RX_LEVEL: + access: r + description: Reflects the current level of the Receive FIFO + lsb: 8 + reset_value: '0' + width: 4 + - TX_LEVEL: + access: r + description: Reflects the current level of the Transmit FIFO + lsb: 16 + reset_value: '0' + width: 4 +- I2S0_DMA1: + fields: !!omap + - RX_DMA1_ENABLE: + access: rw + description: When 1, enables DMA1 for I2S receive + lsb: 0 + reset_value: '0' + width: 1 + - TX_DMA1_ENABLE: + access: rw + description: When 1, enables DMA1 for I2S transmit + lsb: 1 + reset_value: '0' + width: 1 + - RX_DEPTH_DMA1: + access: rw + description: Set the FIFO level that triggers a receive DMA request on DMA1 + lsb: 8 + reset_value: '0' + width: 4 + - TX_DEPTH_DMA1: + access: rw + description: Set the FIFO level that triggers a transmit DMA request on DMA1 + lsb: 16 + reset_value: '0' + width: 4 +- I2S1_DMA1: + fields: !!omap + - RX_DMA1_ENABLE: + access: rw + description: When 1, enables DMA1 for I2S receive + lsb: 0 + reset_value: '0' + width: 1 + - TX_DMA1_ENABLE: + access: rw + description: When 1, enables DMA1 for I2S transmit + lsb: 1 + reset_value: '0' + width: 1 + - RX_DEPTH_DMA1: + access: rw + description: Set the FIFO level that triggers a receive DMA request on DMA1 + lsb: 8 + reset_value: '0' + width: 4 + - TX_DEPTH_DMA1: + access: rw + description: Set the FIFO level that triggers a transmit DMA request on DMA1 + lsb: 16 + reset_value: '0' + width: 4 +- I2S0_DMA2: + fields: !!omap + - RX_DMA2_ENABLE: + access: rw + description: When 1, enables DMA2 for I2S receive + lsb: 0 + reset_value: '0' + width: 1 + - TX_DMA2_ENABLE: + access: rw + description: When 1, enables DMA2 for I2S transmit + lsb: 1 + reset_value: '0' + width: 1 + - RX_DEPTH_DMA2: + access: rw + description: Set the FIFO level that triggers a receive DMA request on DMA2 + lsb: 8 + reset_value: '0' + width: 4 + - TX_DEPTH_DMA2: + access: rw + description: Set the FIFO level that triggers a transmit DMA request on DMA2 + lsb: 16 + reset_value: '0' + width: 4 +- I2S1_DMA2: + fields: !!omap + - RX_DMA2_ENABLE: + access: rw + description: When 1, enables DMA2 for I2S receive + lsb: 0 + reset_value: '0' + width: 1 + - TX_DMA2_ENABLE: + access: rw + description: When 1, enables DMA2 for I2S transmit + lsb: 1 + reset_value: '0' + width: 1 + - RX_DEPTH_DMA2: + access: rw + description: Set the FIFO level that triggers a receive DMA request on DMA2 + lsb: 8 + reset_value: '0' + width: 4 + - TX_DEPTH_DMA2: + access: rw + description: Set the FIFO level that triggers a transmit DMA request on DMA2 + lsb: 16 + reset_value: '0' + width: 4 +- I2S0_IRQ: + fields: !!omap + - RX_IRQ_ENABLE: + access: rw + description: When 1, enables I2S receive interrupt + lsb: 0 + reset_value: '0' + width: 1 + - TX_IRQ_ENABLE: + access: rw + description: When 1, enables I2S transmit interrupt + lsb: 1 + reset_value: '0' + width: 1 + - RX_DEPTH_IRQ: + access: rw + description: Set the FIFO level on which to create an irq request. + lsb: 8 + reset_value: '0' + width: 4 + - TX_DEPTH_IRQ: + access: rw + description: Set the FIFO level on which to create an irq request. + lsb: 16 + reset_value: '0' + width: 4 +- I2S1_IRQ: + fields: !!omap + - RX_IRQ_ENABLE: + access: rw + description: When 1, enables I2S receive interrupt + lsb: 0 + reset_value: '0' + width: 1 + - TX_IRQ_ENABLE: + access: rw + description: When 1, enables I2S transmit interrupt + lsb: 1 + reset_value: '0' + width: 1 + - RX_DEPTH_IRQ: + access: rw + description: Set the FIFO level on which to create an irq request. + lsb: 8 + reset_value: '0' + width: 4 + - TX_DEPTH_IRQ: + access: rw + description: Set the FIFO level on which to create an irq request. + lsb: 16 + reset_value: '0' + width: 4 +- I2S0_TXRATE: + fields: !!omap + - Y_DIVIDER: + access: rw + description: I2S transmit MCLK rate denominator + lsb: 0 + reset_value: '0' + width: 8 + - X_DIVIDER: + access: rw + description: I2S transmit MCLK rate numerator + lsb: 8 + reset_value: '0' + width: 8 +- I2S1_TXRATE: + fields: !!omap + - Y_DIVIDER: + access: rw + description: I2S transmit MCLK rate denominator + lsb: 0 + reset_value: '0' + width: 8 + - X_DIVIDER: + access: rw + description: I2S transmit MCLK rate numerator + lsb: 8 + reset_value: '0' + width: 8 +- I2S0_RXRATE: + fields: !!omap + - Y_DIVIDER: + access: rw + description: I2S receive MCLK rate denominator + lsb: 0 + reset_value: '0' + width: 8 + - X_DIVIDER: + access: rw + description: I2S receive MCLK rate numerator + lsb: 8 + reset_value: '0' + width: 8 +- I2S1_RXRATE: + fields: !!omap + - Y_DIVIDER: + access: rw + description: I2S receive MCLK rate denominator + lsb: 0 + reset_value: '0' + width: 8 + - X_DIVIDER: + access: rw + description: I2S receive MCLK rate numerator + lsb: 8 + reset_value: '0' + width: 8 +- I2S0_TXBITRATE: + fields: !!omap + - TX_BITRATE: + access: rw + description: I2S transmit bit rate + lsb: 0 + reset_value: '0' + width: 6 +- I2S1_TXBITRATE: + fields: !!omap + - TX_BITRATE: + access: rw + description: I2S transmit bit rate + lsb: 0 + reset_value: '0' + width: 6 +- I2S0_RXBITRATE: + fields: !!omap + - RX_BITRATE: + access: rw + description: I2S receive bit rate + lsb: 0 + reset_value: '0' + width: 6 +- I2S1_RXBITRATE: + fields: !!omap + - RX_BITRATE: + access: rw + description: I2S receive bit rate + lsb: 0 + reset_value: '0' + width: 6 +- I2S0_TXMODE: + fields: !!omap + - TXCLKSEL: + access: rw + description: Clock source selection for the transmit bit clock divider + lsb: 0 + reset_value: '0' + width: 2 + - TX4PIN: + access: rw + description: Transmit 4-pin mode selection + lsb: 2 + reset_value: '0' + width: 1 + - TXMCENA: + access: rw + description: Enable for the TX_MCLK output + lsb: 3 + reset_value: '0' + width: 1 +- I2S1_TXMODE: + fields: !!omap + - TXCLKSEL: + access: rw + description: Clock source selection for the transmit bit clock divider + lsb: 0 + reset_value: '0' + width: 2 + - TX4PIN: + access: rw + description: Transmit 4-pin mode selection + lsb: 2 + reset_value: '0' + width: 1 + - TXMCENA: + access: rw + description: Enable for the TX_MCLK output + lsb: 3 + reset_value: '0' + width: 1 +- I2S0_RXMODE: + fields: !!omap + - RXCLKSEL: + access: rw + description: Clock source selection for the receive bit clock divider + lsb: 0 + reset_value: '0' + width: 2 + - RX4PIN: + access: rw + description: Receive 4-pin mode selection + lsb: 2 + reset_value: '0' + width: 1 + - RXMCENA: + access: rw + description: Enable for the RX_MCLK output + lsb: 3 + reset_value: '0' + width: 1 +- I2S1_RXMODE: + fields: !!omap + - RXCLKSEL: + access: rw + description: Clock source selection for the receive bit clock divider + lsb: 0 + reset_value: '0' + width: 2 + - RX4PIN: + access: rw + description: Receive 4-pin mode selection + lsb: 2 + reset_value: '0' + width: 1 + - RXMCENA: + access: rw + description: Enable for the RX_MCLK output + lsb: 3 + reset_value: '0' + width: 1 diff --git a/libopencm3/scripts/data/lpc43xx/rgu.yaml b/libopencm3/scripts/data/lpc43xx/rgu.yaml new file mode 100644 index 0000000..6561d32 --- /dev/null +++ b/libopencm3/scripts/data/lpc43xx/rgu.yaml @@ -0,0 +1,1199 @@ +!!omap +- RESET_CTRL0: + fields: !!omap + - CORE_RST: + access: w + description: Writing a one activates the reset + lsb: 0 + reset_value: '0' + width: 1 + - PERIPH_RST: + access: w + description: Writing a one activates the reset + lsb: 1 + reset_value: '0' + width: 1 + - MASTER_RST: + access: w + description: Writing a one activates the reset + lsb: 2 + reset_value: '0' + width: 1 + - WWDT_RST: + access: '' + description: Writing a one to this bit has no effect + lsb: 4 + reset_value: '0' + width: 1 + - CREG_RST: + access: '' + description: Writing a one to this bit has no effect + lsb: 5 + reset_value: '0' + width: 1 + - BUS_RST: + access: w + description: Writing a one activates the reset + lsb: 8 + reset_value: '0' + width: 1 + - SCU_RST: + access: w + description: Writing a one activates the reset + lsb: 9 + reset_value: '0' + width: 1 + - M4_RST: + access: w + description: Writing a one activates the reset + lsb: 13 + reset_value: '0' + width: 1 + - LCD_RST: + access: w + description: Writing a one activates the reset + lsb: 16 + reset_value: '0' + width: 1 + - USB0_RST: + access: w + description: Writing a one activates the reset + lsb: 17 + reset_value: '0' + width: 1 + - USB1_RST: + access: w + description: Writing a one activates the reset + lsb: 18 + reset_value: '0' + width: 1 + - DMA_RST: + access: w + description: Writing a one activates the reset + lsb: 19 + reset_value: '0' + width: 1 + - SDIO_RST: + access: w + description: Writing a one activates the reset + lsb: 20 + reset_value: '0' + width: 1 + - EMC_RST: + access: w + description: Writing a one activates the reset + lsb: 21 + reset_value: '0' + width: 1 + - ETHERNET_RST: + access: w + description: Writing a one activates the reset + lsb: 22 + reset_value: '0' + width: 1 + - FLASHA_RST: + access: w + description: Writing a one activates the reset + lsb: 25 + reset_value: '0' + width: 1 + - EEPROM_RST: + access: w + description: Writing a one activates the reset + lsb: 27 + reset_value: '0' + width: 1 + - GPIO_RST: + access: w + description: Writing a one activates the reset + lsb: 28 + reset_value: '0' + width: 1 + - FLASHB_RST: + access: w + description: Writing a one activates the reset + lsb: 29 + reset_value: '0' + width: 1 +- RESET_CTRL1: + fields: !!omap + - TIMER0_RST: + access: w + description: Writing a one activates the reset + lsb: 0 + reset_value: '0' + width: 1 + - TIMER1_RST: + access: w + description: Writing a one activates the reset + lsb: 1 + reset_value: '0' + width: 1 + - TIMER2_RST: + access: w + description: Writing a one activates the reset + lsb: 2 + reset_value: '0' + width: 1 + - TIMER3_RST: + access: w + description: Writing a one activates the reset + lsb: 3 + reset_value: '0' + width: 1 + - RTIMER_RST: + access: w + description: Writing a one activates the reset + lsb: 4 + reset_value: '0' + width: 1 + - SCT_RST: + access: w + description: Writing a one activates the reset + lsb: 5 + reset_value: '0' + width: 1 + - MOTOCONPWM_RST: + access: w + description: Writing a one activates the reset + lsb: 6 + reset_value: '0' + width: 1 + - QEI_RST: + access: w + description: Writing a one activates the reset + lsb: 7 + reset_value: '0' + width: 1 + - ADC0_RST: + access: w + description: Writing a one activates the reset + lsb: 8 + reset_value: '0' + width: 1 + - ADC1_RST: + access: w + description: Writing a one activates the reset + lsb: 9 + reset_value: '0' + width: 1 + - DAC_RST: + access: w + description: Writing a one activates the reset + lsb: 10 + reset_value: '0' + width: 1 + - UART0_RST: + access: w + description: Writing a one activates the reset + lsb: 12 + reset_value: '0' + width: 1 + - UART1_RST: + access: w + description: Writing a one activates the reset + lsb: 13 + reset_value: '0' + width: 1 + - UART2_RST: + access: w + description: Writing a one activates the reset + lsb: 14 + reset_value: '0' + width: 1 + - UART3_RST: + access: w + description: Writing a one activates the reset + lsb: 15 + reset_value: '0' + width: 1 + - I2C0_RST: + access: w + description: Writing a one activates the reset + lsb: 16 + reset_value: '0' + width: 1 + - I2C1_RST: + access: w + description: Writing a one activates the reset + lsb: 17 + reset_value: '0' + width: 1 + - SSP0_RST: + access: w + description: Writing a one activates the reset + lsb: 18 + reset_value: '0' + width: 1 + - SSP1_RST: + access: w + description: Writing a one activates the reset + lsb: 19 + reset_value: '0' + width: 1 + - I2S_RST: + access: w + description: Writing a one activates the reset + lsb: 20 + reset_value: '0' + width: 1 + - SPIFI_RST: + access: w + description: Writing a one activates the reset + lsb: 21 + reset_value: '0' + width: 1 + - CAN1_RST: + access: w + description: Writing a one activates the reset + lsb: 22 + reset_value: '0' + width: 1 + - CAN0_RST: + access: w + description: Writing a one activates the reset + lsb: 23 + reset_value: '0' + width: 1 + - M0APP_RST: + access: w + description: Writing a one activates the reset + lsb: 24 + reset_value: '1' + width: 1 + - SGPIO_RST: + access: w + description: Writing a one activates the reset + lsb: 25 + reset_value: '0' + width: 1 + - SPI_RST: + access: w + description: Writing a one activates the reset + lsb: 26 + reset_value: '0' + width: 1 +- RESET_STATUS0: + fields: !!omap + - CORE_RST: + access: rw + description: Status of the CORE_RST reset generator output + lsb: 0 + reset_value: '0x0' + width: 2 + - PERIPH_RST: + access: rw + description: Status of the PERIPH_RST reset generator output + lsb: 2 + reset_value: '0x0' + width: 2 + - MASTER_RST: + access: rw + description: Status of the MASTER_RST reset generator output + lsb: 4 + reset_value: '0x1' + width: 2 + - WWDT_RST: + access: rw + description: Status of the WWDT_RST reset generator output + lsb: 8 + reset_value: '0x0' + width: 2 + - CREG_RST: + access: rw + description: Status of the CREG_RST reset generator output + lsb: 10 + reset_value: '0x0' + width: 2 + - BUS_RST: + access: rw + description: Status of the BUS_RST reset generator output + lsb: 16 + reset_value: '0x1' + width: 2 + - SCU_RST: + access: rw + description: Status of the SCU_RST reset generator output + lsb: 18 + reset_value: '0x1' + width: 2 + - M4_RST: + access: rw + description: Status of the M4_RST reset generator output + lsb: 26 + reset_value: '0x1' + width: 2 +- RESET_STATUS1: + fields: !!omap + - LCD_RST: + access: rw + description: Status of the LCD_RST reset generator output + lsb: 0 + reset_value: '0x1' + width: 2 + - USB0_RST: + access: rw + description: Status of the USB0_RST reset generator output + lsb: 2 + reset_value: '0x1' + width: 2 + - USB1_RST: + access: rw + description: Status of the USB1_RST reset generator output + lsb: 4 + reset_value: '0x1' + width: 2 + - DMA_RST: + access: rw + description: Status of the DMA_RST reset generator output + lsb: 6 + reset_value: '0x1' + width: 2 + - SDIO_RST: + access: rw + description: Status of the SDIO_RST reset generator output + lsb: 8 + reset_value: '0x1' + width: 2 + - EMC_RST: + access: rw + description: Status of the EMC_RST reset generator output + lsb: 10 + reset_value: '0x1' + width: 2 + - ETHERNET_RST: + access: rw + description: Status of the ETHERNET_RST reset generator output + lsb: 12 + reset_value: '0x1' + width: 2 + - FLASHA_RST: + access: '' + description: Status of the FLASHA_RST reset generator output + lsb: 18 + reset_value: '0x1' + width: 2 + - EEPROM_RST: + access: '' + description: Status of the EEPROM_RST reset generator output + lsb: 22 + reset_value: '0x1' + width: 2 + - GPIO_RST: + access: rw + description: Status of the GPIO_RST reset generator output + lsb: 24 + reset_value: '0x1' + width: 2 + - FLASHB_RST: + access: rw + description: Status of the FLASHB_RST reset generator output + lsb: 26 + reset_value: '0x1' + width: 2 +- RESET_STATUS2: + fields: !!omap + - TIMER0_RST: + access: rw + description: Status of the TIMER0_RST reset generator output + lsb: 0 + reset_value: '0x1' + width: 2 + - TIMER1_RST: + access: rw + description: Status of the TIMER1_RST reset generator output + lsb: 2 + reset_value: '0x1' + width: 2 + - TIMER2_RST: + access: rw + description: Status of the TIMER2_RST reset generator output + lsb: 4 + reset_value: '0x1' + width: 2 + - TIMER3_RST: + access: rw + description: Status of the TIMER3_RST reset generator output + lsb: 6 + reset_value: '0x1' + width: 2 + - RITIMER_RST: + access: rw + description: Status of the RITIMER_RST reset generator output + lsb: 8 + reset_value: '0x1' + width: 2 + - SCT_RST: + access: rw + description: Status of the SCT_RST reset generator output + lsb: 10 + reset_value: '0x1' + width: 2 + - MOTOCONPWM_RST: + access: rw + description: Status of the MOTOCONPWM_RST reset generator output + lsb: 12 + reset_value: '0x1' + width: 2 + - QEI_RST: + access: rw + description: Status of the QEI_RST reset generator output + lsb: 14 + reset_value: '0x1' + width: 2 + - ADC0_RST: + access: rw + description: Status of the ADC0_RST reset generator output + lsb: 16 + reset_value: '0x1' + width: 2 + - ADC1_RST: + access: rw + description: Status of the ADC1_RST reset generator output + lsb: 18 + reset_value: '0x1' + width: 2 + - DAC_RST: + access: rw + description: Status of the DAC_RST reset generator output + lsb: 20 + reset_value: '0x1' + width: 2 + - UART0_RST: + access: rw + description: Status of the UART0_RST reset generator output + lsb: 24 + reset_value: '0x1' + width: 2 + - UART1_RST: + access: rw + description: Status of the UART1_RST reset generator output + lsb: 26 + reset_value: '0x1' + width: 2 + - UART2_RST: + access: rw + description: Status of the UART2_RST reset generator output + lsb: 28 + reset_value: '0x1' + width: 2 + - UART3_RST: + access: rw + description: Status of the UART3_RST reset generator output + lsb: 30 + reset_value: '0x1' + width: 2 +- RESET_STATUS3: + fields: !!omap + - I2C0_RST: + access: rw + description: Status of the I2C0_RST reset generator output + lsb: 0 + reset_value: '0x1' + width: 2 + - I2C1_RST: + access: rw + description: Status of the I2C1_RST reset generator output + lsb: 2 + reset_value: '0x1' + width: 2 + - SSP0_RST: + access: rw + description: Status of the SSP0_RST reset generator output + lsb: 4 + reset_value: '0x1' + width: 2 + - SSP1_RST: + access: rw + description: Status of the SSP1_RST reset generator output + lsb: 6 + reset_value: '0x1' + width: 2 + - I2S_RST: + access: rw + description: Status of the I2S_RST reset generator output + lsb: 8 + reset_value: '0x1' + width: 2 + - SPIFI_RST: + access: rw + description: Status of the SPIFI_RST reset generator output + lsb: 10 + reset_value: '0x1' + width: 2 + - CAN1_RST: + access: rw + description: Status of the CAN1_RST reset generator output + lsb: 12 + reset_value: '0x1' + width: 2 + - CAN0_RST: + access: rw + description: Status of the CAN0_RST reset generator output + lsb: 14 + reset_value: '0x1' + width: 2 + - M0APP_RST: + access: rw + description: Status of the M0APP_RST reset generator output + lsb: 16 + reset_value: '0x3' + width: 2 + - SGPIO_RST: + access: rw + description: Status of the SGPIO_RST reset generator output + lsb: 18 + reset_value: '0x1' + width: 2 + - SPI_RST: + access: rw + description: Status of the SPI_RST reset generator output + lsb: 20 + reset_value: '0x1' + width: 2 +- RESET_ACTIVE_STATUS0: + fields: !!omap + - CORE_RST: + access: r + description: Current status of the CORE_RST + lsb: 0 + reset_value: '0' + width: 1 + - PERIPH_RST: + access: r + description: Current status of the PERIPH_RST + lsb: 1 + reset_value: '0' + width: 1 + - MASTER_RST: + access: r + description: Current status of the MASTER_RST + lsb: 2 + reset_value: '0' + width: 1 + - WWDT_RST: + access: r + description: Current status of the WWDT_RST + lsb: 4 + reset_value: '0' + width: 1 + - CREG_RST: + access: r + description: Current status of the CREG_RST + lsb: 5 + reset_value: '0' + width: 1 + - BUS_RST: + access: r + description: Current status of the BUS_RST + lsb: 8 + reset_value: '0' + width: 1 + - SCU_RST: + access: r + description: Current status of the SCU_RST + lsb: 9 + reset_value: '0' + width: 1 + - M4_RST: + access: r + description: Current status of the M4_RST + lsb: 13 + reset_value: '0' + width: 1 + - LCD_RST: + access: r + description: Current status of the LCD_RST + lsb: 16 + reset_value: '0' + width: 1 + - USB0_RST: + access: r + description: Current status of the USB0_RST + lsb: 17 + reset_value: '0' + width: 1 + - USB1_RST: + access: r + description: Current status of the USB1_RST + lsb: 18 + reset_value: '0' + width: 1 + - DMA_RST: + access: r + description: Current status of the DMA_RST + lsb: 19 + reset_value: '0' + width: 1 + - SDIO_RST: + access: r + description: Current status of the SDIO_RST + lsb: 20 + reset_value: '0' + width: 1 + - EMC_RST: + access: r + description: Current status of the EMC_RST + lsb: 21 + reset_value: '0' + width: 1 + - ETHERNET_RST: + access: r + description: Current status of the ETHERNET_RST + lsb: 22 + reset_value: '0' + width: 1 + - FLASHA_RST: + access: r + description: Current status of the FLASHA_RST + lsb: 25 + reset_value: '0' + width: 1 + - EEPROM_RST: + access: r + description: Current status of the EEPROM_RST + lsb: 27 + reset_value: '0' + width: 1 + - GPIO_RST: + access: r + description: Current status of the GPIO_RST + lsb: 28 + reset_value: '0' + width: 1 + - FLASHB_RST: + access: r + description: Current status of the FLASHB_RST + lsb: 29 + reset_value: '0' + width: 1 +- RESET_ACTIVE_STATUS1: + fields: !!omap + - TIMER0_RST: + access: r + description: Current status of the TIMER0_RST + lsb: 0 + reset_value: '0' + width: 1 + - TIMER1_RST: + access: r + description: Current status of the TIMER1_RST + lsb: 1 + reset_value: '0' + width: 1 + - TIMER2_RST: + access: r + description: Current status of the TIMER2_RST + lsb: 2 + reset_value: '0' + width: 1 + - TIMER3_RST: + access: r + description: Current status of the TIMER3_RST + lsb: 3 + reset_value: '0' + width: 1 + - RITIMER_RST: + access: r + description: Current status of the RITIMER_RST + lsb: 4 + reset_value: '0' + width: 1 + - SCT_RST: + access: r + description: Current status of the SCT_RST + lsb: 5 + reset_value: '0' + width: 1 + - MOTOCONPWM_RST: + access: r + description: Current status of the MOTOCONPWM_RST + lsb: 6 + reset_value: '0' + width: 1 + - QEI_RST: + access: r + description: Current status of the QEI_RST + lsb: 7 + reset_value: '0' + width: 1 + - ADC0_RST: + access: r + description: Current status of the ADC0_RST + lsb: 8 + reset_value: '0' + width: 1 + - ADC1_RST: + access: r + description: Current status of the ADC1_RST + lsb: 9 + reset_value: '0' + width: 1 + - DAC_RST: + access: r + description: Current status of the DAC_RST + lsb: 10 + reset_value: '0' + width: 1 + - UART0_RST: + access: r + description: Current status of the UART0_RST + lsb: 12 + reset_value: '0' + width: 1 + - UART1_RST: + access: r + description: Current status of the UART1_RST + lsb: 13 + reset_value: '0' + width: 1 + - UART2_RST: + access: r + description: Current status of the UART2_RST + lsb: 14 + reset_value: '0' + width: 1 + - UART3_RST: + access: r + description: Current status of the UART3_RST + lsb: 15 + reset_value: '0' + width: 1 + - I2C0_RST: + access: r + description: Current status of the I2C0_RST + lsb: 16 + reset_value: '0' + width: 1 + - I2C1_RST: + access: r + description: Current status of the I2C1_RST + lsb: 17 + reset_value: '0' + width: 1 + - SSP0_RST: + access: r + description: Current status of the SSP0_RST + lsb: 18 + reset_value: '0' + width: 1 + - SSP1_RST: + access: r + description: Current status of the SSP1_RST + lsb: 19 + reset_value: '0' + width: 1 + - I2S_RST: + access: r + description: Current status of the I2S_RST + lsb: 20 + reset_value: '0' + width: 1 + - SPIFI_RST: + access: r + description: Current status of the SPIFI_RST + lsb: 21 + reset_value: '0' + width: 1 + - CAN1_RST: + access: r + description: Current status of the CAN1_RST + lsb: 22 + reset_value: '0' + width: 1 + - CAN0_RST: + access: r + description: Current status of the CAN0_RST + lsb: 23 + reset_value: '0' + width: 1 + - M0APP_RST: + access: r + description: Current status of the M0APP_RST + lsb: 24 + reset_value: '0' + width: 1 + - SGPIO_RST: + access: r + description: Current status of the SGPIO_RST + lsb: 25 + reset_value: '0' + width: 1 + - SPI_RST: + access: r + description: Current status of the SPI_RST + lsb: 26 + reset_value: '0' + width: 1 +- RESET_EXT_STAT0: + fields: !!omap + - EXT_RESET: + access: rw + description: Reset activated by external reset from reset pin + lsb: 0 + reset_value: '0' + width: 1 + - BOD_RESET: + access: rw + description: Reset activated by BOD reset + lsb: 4 + reset_value: '0' + width: 1 + - WWDT_RESET: + access: rw + description: Reset activated by WWDT time-out + lsb: 5 + reset_value: '0' + width: 1 +- RESET_EXT_STAT1: + fields: !!omap + - CORE_RESET: + access: rw + description: Reset activated by CORE_RST output + lsb: 1 + reset_value: '0' + width: 1 +- RESET_EXT_STAT2: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT4: + fields: !!omap + - CORE_RESET: + access: rw + description: Reset activated by CORE_RST output + lsb: 1 + reset_value: '0' + width: 1 +- RESET_EXT_STAT5: + fields: !!omap + - CORE_RESET: + access: rw + description: Reset activated by CORE_RST output + lsb: 1 + reset_value: '0' + width: 1 +- RESET_EXT_STAT8: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT9: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT13: + fields: !!omap + - MASTER_RESET: + access: rw + description: Reset activated by MASTER_RST output + lsb: 3 + reset_value: '0' + width: 1 +- RESET_EXT_STAT16: + fields: !!omap + - MASTER_RESET: + access: rw + description: Reset activated by MASTER_RST output + lsb: 3 + reset_value: '0' + width: 1 +- RESET_EXT_STAT17: + fields: !!omap + - MASTER_RESET: + access: rw + description: Reset activated by MASTER_RST output + lsb: 3 + reset_value: '0' + width: 1 +- RESET_EXT_STAT18: + fields: !!omap + - MASTER_RESET: + access: rw + description: Reset activated by MASTER_RST output + lsb: 3 + reset_value: '0' + width: 1 +- RESET_EXT_STAT19: + fields: !!omap + - MASTER_RESET: + access: rw + description: Reset activated by MASTER_RST output + lsb: 3 + reset_value: '0' + width: 1 +- RESET_EXT_STAT20: + fields: !!omap + - MASTER_RESET: + access: rw + description: Reset activated by MASTER_RST output + lsb: 3 + reset_value: '0' + width: 1 +- RESET_EXT_STAT21: + fields: !!omap + - MASTER_RESET: + access: rw + description: Reset activated by MASTER_RST output + lsb: 3 + reset_value: '0' + width: 1 +- RESET_EXT_STAT22: + fields: !!omap + - MASTER_RESET: + access: rw + description: Reset activated by MASTER_RST output + lsb: 3 + reset_value: '0' + width: 1 +- RESET_EXT_STAT25: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT27: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT28: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT29: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT32: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT33: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT34: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT35: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT36: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT37: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT38: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT39: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT40: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT41: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT42: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT44: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT45: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT46: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT47: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT48: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT49: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT50: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT51: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT52: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT53: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT54: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT55: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT56: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '' + width: 1 +- RESET_EXT_STAT57: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 +- RESET_EXT_STAT58: + fields: !!omap + - PERIPHERAL_RESET: + access: rw + description: Reset activated by PERIPHERAL_RST output + lsb: 2 + reset_value: '0' + width: 1 diff --git a/libopencm3/scripts/data/lpc43xx/ritimer.yaml b/libopencm3/scripts/data/lpc43xx/ritimer.yaml new file mode 100644 index 0000000..9c4da5c --- /dev/null +++ b/libopencm3/scripts/data/lpc43xx/ritimer.yaml @@ -0,0 +1,51 @@ +!!omap +- RITIMER_COMPVAL: + fields: !!omap + - RICOMP: + access: rw + description: Compare register + lsb: 0 + reset_value: '0xFFFFFFFF' + width: 32 +- RITIMER_MASK: + fields: !!omap + - RIMASK: + access: rw + description: Mask register + lsb: 0 + reset_value: '0' + width: 32 +- RITIMER_CTRL: + fields: !!omap + - RITINT: + access: rw + description: Interrupt flag + lsb: 0 + reset_value: '0' + width: 1 + - RITENCLR: + access: rw + description: Timer enable clear + lsb: 1 + reset_value: '0' + width: 1 + - RITENBR: + access: rw + description: Timer enable for debug + lsb: 2 + reset_value: '1' + width: 1 + - RITEN: + access: rw + description: Timer enable + lsb: 3 + reset_value: '1' + width: 1 +- RITIMER_COUNTER: + fields: !!omap + - RICOUNTER: + access: rw + description: 32-bit up counter + lsb: 0 + reset_value: '0' + width: 32 diff --git a/libopencm3/scripts/data/lpc43xx/scu.yaml b/libopencm3/scripts/data/lpc43xx/scu.yaml new file mode 100644 index 0000000..447ce24 --- /dev/null +++ b/libopencm3/scripts/data/lpc43xx/scu.yaml @@ -0,0 +1,7063 @@ +!!omap +- SCU_SFSP0_0: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP0_1: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP1_0: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP1_1: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP1_2: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP1_3: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP1_4: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP1_5: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP1_6: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP1_7: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP1_8: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP1_9: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP1_10: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP1_11: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP1_12: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP1_13: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP1_14: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP1_15: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP1_16: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP1_18: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP1_19: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP1_20: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP2_0: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP2_1: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP2_2: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP2_6: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP2_7: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP2_8: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP2_9: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP2_10: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP2_11: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP2_12: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP2_13: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP3_0: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP3_1: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP3_2: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP3_4: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP3_5: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP3_6: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP3_7: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP3_8: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP4_0: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP4_1: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP4_2: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP4_3: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP4_4: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP4_5: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP4_6: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP4_7: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP4_8: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP4_9: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP4_10: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP5_0: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP5_1: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP5_2: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP5_3: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP5_4: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP5_5: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP5_6: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP5_7: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP6_0: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP6_1: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP6_2: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP6_3: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP6_4: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP6_5: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP6_6: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP6_7: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP6_8: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP6_9: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP6_10: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP6_11: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP6_12: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP7_0: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP7_1: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP7_2: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP7_3: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP7_4: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP7_5: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP7_6: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP7_7: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP8_3: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP8_4: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP8_5: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP8_6: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP8_7: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP8_8: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP9_0: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP9_1: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP9_2: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP9_3: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP9_4: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP9_5: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP9_6: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPA_0: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPA_4: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPB_0: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPB_1: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPB_2: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPB_3: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPB_4: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPB_5: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPB_6: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPC_0: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPC_1: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPC_2: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPC_3: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPC_4: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPC_5: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPC_6: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPC_7: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPC_8: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPC_9: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPC_10: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPC_11: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPC_12: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPC_13: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPC_14: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPD_0: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPD_1: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPD_2: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPD_3: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPD_4: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPD_5: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPD_6: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPD_7: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPD_8: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPD_9: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPD_10: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPD_11: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPD_12: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPD_13: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPD_14: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPD_15: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPD_16: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPE_0: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPE_1: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPE_2: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPE_3: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPE_4: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPE_5: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPE_6: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPE_7: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPE_8: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPE_9: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPE_10: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPE_11: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPE_12: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPE_13: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPE_14: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPE_15: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPF_0: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPF_1: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPF_2: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPF_3: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPF_4: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPF_5: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPF_6: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPF_7: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPF_8: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPF_9: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPF_10: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSPF_11: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSP1_17: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 + - EHD: + access: rw + description: Select drive strength + lsb: 8 + reset_value: '0' + width: 2 +- SCU_SFSP2_3: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 + - EHD: + access: rw + description: Select drive strength + lsb: 8 + reset_value: '0' + width: 2 +- SCU_SFSP2_4: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 + - EHD: + access: rw + description: Select drive strength + lsb: 8 + reset_value: '0' + width: 2 +- SCU_SFSP2_5: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 + - EHD: + access: rw + description: Select drive strength + lsb: 8 + reset_value: '0' + width: 2 +- SCU_SFSP8_0: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 + - EHD: + access: rw + description: Select drive strength + lsb: 8 + reset_value: '0' + width: 2 +- SCU_SFSP8_1: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 + - EHD: + access: rw + description: Select drive strength + lsb: 8 + reset_value: '0' + width: 2 +- SCU_SFSP8_2: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 + - EHD: + access: rw + description: Select drive strength + lsb: 8 + reset_value: '0' + width: 2 +- SCU_SFSPA_1: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 + - EHD: + access: rw + description: Select drive strength + lsb: 8 + reset_value: '0' + width: 2 +- SCU_SFSPA_2: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 + - EHD: + access: rw + description: Select drive strength + lsb: 8 + reset_value: '0' + width: 2 +- SCU_SFSPA_3: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 + - EHD: + access: rw + description: Select drive strength + lsb: 8 + reset_value: '0' + width: 2 +- SCU_SFSP3_3: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSCLK0: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSCLK1: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSCLK2: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSCLK3: + fields: !!omap + - MODE: + access: rw + description: Select pin function + lsb: 0 + reset_value: '0' + width: 3 + - EPD: + access: rw + description: Enable pull-down resistor at pad + lsb: 3 + reset_value: '0' + width: 1 + - EPUN: + access: rw + description: Disable pull-up resistor at pad + lsb: 4 + reset_value: '0' + width: 1 + - EHS: + access: rw + description: Select Slew rate + lsb: 5 + reset_value: '0' + width: 1 + - EZI: + access: rw + description: Input buffer enable + lsb: 6 + reset_value: '0' + width: 1 + - ZIF: + access: rw + description: Input glitch filter + lsb: 7 + reset_value: '0' + width: 1 +- SCU_SFSUSB: + fields: !!omap + - USB_AIM: + access: rw + description: Differential data input AIP/AIM + lsb: 0 + reset_value: '0' + width: 1 + - USB_ESEA: + access: rw + description: Control signal for differential input or single input + lsb: 1 + reset_value: '1' + width: 1 + - USB_EPD: + access: rw + description: Enable pull-down connect + lsb: 2 + reset_value: '0' + width: 1 + - USB_EPWR: + access: rw + description: Power mode + lsb: 4 + reset_value: '0' + width: 1 + - USB_VBUS: + access: rw + description: Enable the vbus_valid signal + lsb: 5 + reset_value: '0' + width: 1 +- SCU_SFSI2C0: + fields: !!omap + - SCL_EFP: + access: rw + description: Select input glitch filter time constant for the SCL pin + lsb: 0 + reset_value: '0' + width: 1 + - SCL_EHD: + access: rw + description: Select I2C mode for the SCL pin + lsb: 2 + reset_value: '0' + width: 1 + - SCL_EZI: + access: rw + description: Enable the input receiver for the SCL pin + lsb: 3 + reset_value: '0' + width: 1 + - SCL_ZIF: + access: rw + description: Enable or disable input glitch filter for the SCL pin + lsb: 7 + reset_value: '0' + width: 1 + - SDA_EFP: + access: rw + description: Select input glitch filter time constant for the SDA pin + lsb: 8 + reset_value: '0' + width: 1 + - SDA_EHD: + access: rw + description: Select I2C mode for the SDA pin + lsb: 10 + reset_value: '0' + width: 1 + - SDA_EZI: + access: rw + description: Enable the input receiver for the SDA pin + lsb: 11 + reset_value: '0' + width: 1 + - SDA_ZIF: + access: rw + description: Enable or disable input glitch filter for the SDA pin + lsb: 15 + reset_value: '0' + width: 1 +- SCU_ENAIO0: + fields: !!omap + - ADC0_0: + access: rw + description: Select ADC0_0 + lsb: 0 + reset_value: '0' + width: 1 + - ADC0_1: + access: rw + description: Select ADC0_1 + lsb: 1 + reset_value: '0' + width: 1 + - ADC0_2: + access: rw + description: Select ADC0_2 + lsb: 2 + reset_value: '0' + width: 1 + - ADC0_3: + access: rw + description: Select ADC0_3 + lsb: 3 + reset_value: '0' + width: 1 + - ADC0_4: + access: rw + description: Select ADC0_4 + lsb: 4 + reset_value: '0' + width: 1 + - ADC0_5: + access: rw + description: Select ADC0_5 + lsb: 5 + reset_value: '0' + width: 1 + - ADC0_6: + access: rw + description: Select ADC0_6 + lsb: 6 + reset_value: '0' + width: 1 +- SCU_ENAIO1: + fields: !!omap + - ADC1_0: + access: rw + description: Select ADC1_0 + lsb: 0 + reset_value: '0' + width: 1 + - ADC1_1: + access: rw + description: Select ADC1_1 + lsb: 1 + reset_value: '0' + width: 1 + - ADC1_2: + access: rw + description: Select ADC1_2 + lsb: 2 + reset_value: '0' + width: 1 + - ADC1_3: + access: rw + description: Select ADC1_3 + lsb: 3 + reset_value: '0' + width: 1 + - ADC1_4: + access: rw + description: Select ADC1_4 + lsb: 4 + reset_value: '0' + width: 1 + - ADC1_5: + access: rw + description: Select ADC1_5 + lsb: 5 + reset_value: '0' + width: 1 + - ADC1_6: + access: rw + description: Select ADC1_6 + lsb: 6 + reset_value: '0' + width: 1 + - ADC1_7: + access: rw + description: Select ADC1_7 + lsb: 7 + reset_value: '0' + width: 1 +- SCU_ENAIO2: + fields: !!omap + - DAC: + access: rw + description: Select DAC + lsb: 0 + reset_value: '0' + width: 1 + - BG: + access: rw + description: Select band gap output + lsb: 4 + reset_value: '0' + width: 1 +- SCU_EMCDELAYCLK: + fields: !!omap + - CLK_DELAY: + access: rw + description: EMC_CLKn SDRAM clock output delay + lsb: 0 + reset_value: '0' + width: 16 +- SCU_PINTSEL0: + fields: !!omap + - INTPIN0: + access: '' + description: pin number for interrupt 0 source + lsb: 0 + reset_value: '0' + width: 5 + - PORTSEL0: + access: '' + description: port for interrupt 0 source + lsb: 5 + reset_value: '0' + width: 3 + - INTPIN1: + access: '' + description: pin number for interrupt 1 source + lsb: 8 + reset_value: '0' + width: 5 + - PORTSEL1: + access: '' + description: port for interrupt 1 source + lsb: 13 + reset_value: '0' + width: 3 + - INTPIN2: + access: '' + description: pin number for interrupt 2 source + lsb: 16 + reset_value: '0' + width: 5 + - PORTSEL2: + access: '' + description: port for interrupt 2 source + lsb: 21 + reset_value: '0' + width: 3 + - INTPIN3: + access: '' + description: pin number for interrupt 3 source + lsb: 24 + reset_value: '0' + width: 5 + - PORTSEL3: + access: '' + description: port for interrupt 3 source + lsb: 29 + reset_value: '0' + width: 3 +- SCU_PINTSEL1: + fields: !!omap + - INTPIN4: + access: '' + description: pin number for interrupt 4 source + lsb: 0 + reset_value: '0' + width: 5 + - PORTSEL4: + access: '' + description: port for interrupt 4 source + lsb: 5 + reset_value: '0' + width: 3 + - INTPIN5: + access: '' + description: pin number for interrupt 5 source + lsb: 8 + reset_value: '0' + width: 5 + - PORTSEL5: + access: '' + description: port for interrupt 5 source + lsb: 13 + reset_value: '0' + width: 3 + - INTPIN6: + access: '' + description: pin number for interrupt 6 source + lsb: 16 + reset_value: '0' + width: 5 + - PORTSEL6: + access: '' + description: port for interrupt 6 source + lsb: 21 + reset_value: '0' + width: 3 + - INTPIN7: + access: '' + description: pin number for interrupt 7 source + lsb: 24 + reset_value: '0' + width: 5 + - PORTSEL7: + access: '' + description: port for interrupt 7 source + lsb: 29 + reset_value: '0' + width: 3 diff --git a/libopencm3/scripts/data/lpc43xx/sgpio.yaml b/libopencm3/scripts/data/lpc43xx/sgpio.yaml new file mode 100644 index 0000000..fab91b6 --- /dev/null +++ b/libopencm3/scripts/data/lpc43xx/sgpio.yaml @@ -0,0 +1,1953 @@ +!!omap +- SGPIO_OUT_MUX_CFG0: + fields: !!omap + - P_OUT_CFG: + access: rw + description: Output control of output SGPIOn + lsb: 0 + reset_value: '0' + width: 4 + - P_OE_CFG: + access: rw + description: Output enable source + lsb: 4 + reset_value: '0' + width: 3 +- SGPIO_OUT_MUX_CFG1: + fields: !!omap + - P_OUT_CFG: + access: rw + description: Output control of output SGPIOn + lsb: 0 + reset_value: '0' + width: 4 + - P_OE_CFG: + access: rw + description: Output enable source + lsb: 4 + reset_value: '0' + width: 3 +- SGPIO_OUT_MUX_CFG2: + fields: !!omap + - P_OUT_CFG: + access: rw + description: Output control of output SGPIOn + lsb: 0 + reset_value: '0' + width: 4 + - P_OE_CFG: + access: rw + description: Output enable source + lsb: 4 + reset_value: '0' + width: 3 +- SGPIO_OUT_MUX_CFG3: + fields: !!omap + - P_OUT_CFG: + access: rw + description: Output control of output SGPIOn + lsb: 0 + reset_value: '0' + width: 4 + - P_OE_CFG: + access: rw + description: Output enable source + lsb: 4 + reset_value: '0' + width: 3 +- SGPIO_OUT_MUX_CFG4: + fields: !!omap + - P_OUT_CFG: + access: rw + description: Output control of output SGPIOn + lsb: 0 + reset_value: '0' + width: 4 + - P_OE_CFG: + access: rw + description: Output enable source + lsb: 4 + reset_value: '0' + width: 3 +- SGPIO_OUT_MUX_CFG5: + fields: !!omap + - P_OUT_CFG: + access: rw + description: Output control of output SGPIOn + lsb: 0 + reset_value: '0' + width: 4 + - P_OE_CFG: + access: rw + description: Output enable source + lsb: 4 + reset_value: '0' + width: 3 +- SGPIO_OUT_MUX_CFG6: + fields: !!omap + - P_OUT_CFG: + access: rw + description: Output control of output SGPIOn + lsb: 0 + reset_value: '0' + width: 4 + - P_OE_CFG: + access: rw + description: Output enable source + lsb: 4 + reset_value: '0' + width: 3 +- SGPIO_OUT_MUX_CFG7: + fields: !!omap + - P_OUT_CFG: + access: rw + description: Output control of output SGPIOn + lsb: 0 + reset_value: '0' + width: 4 + - P_OE_CFG: + access: rw + description: Output enable source + lsb: 4 + reset_value: '0' + width: 3 +- SGPIO_OUT_MUX_CFG8: + fields: !!omap + - P_OUT_CFG: + access: rw + description: Output control of output SGPIOn + lsb: 0 + reset_value: '0' + width: 4 + - P_OE_CFG: + access: rw + description: Output enable source + lsb: 4 + reset_value: '0' + width: 3 +- SGPIO_OUT_MUX_CFG9: + fields: !!omap + - P_OUT_CFG: + access: rw + description: Output control of output SGPIOn + lsb: 0 + reset_value: '0' + width: 4 + - P_OE_CFG: + access: rw + description: Output enable source + lsb: 4 + reset_value: '0' + width: 3 +- SGPIO_OUT_MUX_CFG10: + fields: !!omap + - P_OUT_CFG: + access: rw + description: Output control of output SGPIOn + lsb: 0 + reset_value: '0' + width: 4 + - P_OE_CFG: + access: rw + description: Output enable source + lsb: 4 + reset_value: '0' + width: 3 +- SGPIO_OUT_MUX_CFG11: + fields: !!omap + - P_OUT_CFG: + access: rw + description: Output control of output SGPIOn + lsb: 0 + reset_value: '0' + width: 4 + - P_OE_CFG: + access: rw + description: Output enable source + lsb: 4 + reset_value: '0' + width: 3 +- SGPIO_OUT_MUX_CFG12: + fields: !!omap + - P_OUT_CFG: + access: rw + description: Output control of output SGPIOn + lsb: 0 + reset_value: '0' + width: 4 + - P_OE_CFG: + access: rw + description: Output enable source + lsb: 4 + reset_value: '0' + width: 3 +- SGPIO_OUT_MUX_CFG13: + fields: !!omap + - P_OUT_CFG: + access: rw + description: Output control of output SGPIOn + lsb: 0 + reset_value: '0' + width: 4 + - P_OE_CFG: + access: rw + description: Output enable source + lsb: 4 + reset_value: '0' + width: 3 +- SGPIO_OUT_MUX_CFG14: + fields: !!omap + - P_OUT_CFG: + access: rw + description: Output control of output SGPIOn + lsb: 0 + reset_value: '0' + width: 4 + - P_OE_CFG: + access: rw + description: Output enable source + lsb: 4 + reset_value: '0' + width: 3 +- SGPIO_OUT_MUX_CFG15: + fields: !!omap + - P_OUT_CFG: + access: rw + description: Output control of output SGPIOn + lsb: 0 + reset_value: '0' + width: 4 + - P_OE_CFG: + access: rw + description: Output enable source + lsb: 4 + reset_value: '0' + width: 3 +- SGPIO_MUX_CFG0: + fields: !!omap + - EXT_CLK_ENABLE: + access: rw + description: Select clock signal + lsb: 0 + reset_value: '0' + width: 1 + - CLK_SOURCE_PIN_MODE: + access: rw + description: Select source clock pin + lsb: 1 + reset_value: '0' + width: 2 + - CLK_SOURCE_SLICE_MODE: + access: rw + description: Select clock source slice + lsb: 3 + reset_value: '0' + width: 2 + - QUALIFIER_MODE: + access: rw + description: Select qualifier mode + lsb: 5 + reset_value: '0' + width: 2 + - QUALIFIER_PIN_MODE: + access: rw + description: Select qualifier pin + lsb: 7 + reset_value: '0' + width: 2 + - QUALIFIER_SLICE_MODE: + access: rw + description: Select qualifier slice + lsb: 9 + reset_value: '0' + width: 2 + - CONCAT_ENABLE: + access: rw + description: Enable concatenation + lsb: 11 + reset_value: '0' + width: 1 + - CONCAT_ORDER: + access: rw + description: Select concatenation order + lsb: 12 + reset_value: '0' + width: 2 +- SGPIO_MUX_CFG1: + fields: !!omap + - EXT_CLK_ENABLE: + access: rw + description: Select clock signal + lsb: 0 + reset_value: '0' + width: 1 + - CLK_SOURCE_PIN_MODE: + access: rw + description: Select source clock pin + lsb: 1 + reset_value: '0' + width: 2 + - CLK_SOURCE_SLICE_MODE: + access: rw + description: Select clock source slice + lsb: 3 + reset_value: '0' + width: 2 + - QUALIFIER_MODE: + access: rw + description: Select qualifier mode + lsb: 5 + reset_value: '0' + width: 2 + - QUALIFIER_PIN_MODE: + access: rw + description: Select qualifier pin + lsb: 7 + reset_value: '0' + width: 2 + - QUALIFIER_SLICE_MODE: + access: rw + description: Select qualifier slice + lsb: 9 + reset_value: '0' + width: 2 + - CONCAT_ENABLE: + access: rw + description: Enable concatenation + lsb: 11 + reset_value: '0' + width: 1 + - CONCAT_ORDER: + access: rw + description: Select concatenation order + lsb: 12 + reset_value: '0' + width: 2 +- SGPIO_MUX_CFG2: + fields: !!omap + - EXT_CLK_ENABLE: + access: rw + description: Select clock signal + lsb: 0 + reset_value: '0' + width: 1 + - CLK_SOURCE_PIN_MODE: + access: rw + description: Select source clock pin + lsb: 1 + reset_value: '0' + width: 2 + - CLK_SOURCE_SLICE_MODE: + access: rw + description: Select clock source slice + lsb: 3 + reset_value: '0' + width: 2 + - QUALIFIER_MODE: + access: rw + description: Select qualifier mode + lsb: 5 + reset_value: '0' + width: 2 + - QUALIFIER_PIN_MODE: + access: rw + description: Select qualifier pin + lsb: 7 + reset_value: '0' + width: 2 + - QUALIFIER_SLICE_MODE: + access: rw + description: Select qualifier slice + lsb: 9 + reset_value: '0' + width: 2 + - CONCAT_ENABLE: + access: rw + description: Enable concatenation + lsb: 11 + reset_value: '0' + width: 1 + - CONCAT_ORDER: + access: rw + description: Select concatenation order + lsb: 12 + reset_value: '0' + width: 2 +- SGPIO_MUX_CFG3: + fields: !!omap + - EXT_CLK_ENABLE: + access: rw + description: Select clock signal + lsb: 0 + reset_value: '0' + width: 1 + - CLK_SOURCE_PIN_MODE: + access: rw + description: Select source clock pin + lsb: 1 + reset_value: '0' + width: 2 + - CLK_SOURCE_SLICE_MODE: + access: rw + description: Select clock source slice + lsb: 3 + reset_value: '0' + width: 2 + - QUALIFIER_MODE: + access: rw + description: Select qualifier mode + lsb: 5 + reset_value: '0' + width: 2 + - QUALIFIER_PIN_MODE: + access: rw + description: Select qualifier pin + lsb: 7 + reset_value: '0' + width: 2 + - QUALIFIER_SLICE_MODE: + access: rw + description: Select qualifier slice + lsb: 9 + reset_value: '0' + width: 2 + - CONCAT_ENABLE: + access: rw + description: Enable concatenation + lsb: 11 + reset_value: '0' + width: 1 + - CONCAT_ORDER: + access: rw + description: Select concatenation order + lsb: 12 + reset_value: '0' + width: 2 +- SGPIO_MUX_CFG4: + fields: !!omap + - EXT_CLK_ENABLE: + access: rw + description: Select clock signal + lsb: 0 + reset_value: '0' + width: 1 + - CLK_SOURCE_PIN_MODE: + access: rw + description: Select source clock pin + lsb: 1 + reset_value: '0' + width: 2 + - CLK_SOURCE_SLICE_MODE: + access: rw + description: Select clock source slice + lsb: 3 + reset_value: '0' + width: 2 + - QUALIFIER_MODE: + access: rw + description: Select qualifier mode + lsb: 5 + reset_value: '0' + width: 2 + - QUALIFIER_PIN_MODE: + access: rw + description: Select qualifier pin + lsb: 7 + reset_value: '0' + width: 2 + - QUALIFIER_SLICE_MODE: + access: rw + description: Select qualifier slice + lsb: 9 + reset_value: '0' + width: 2 + - CONCAT_ENABLE: + access: rw + description: Enable concatenation + lsb: 11 + reset_value: '0' + width: 1 + - CONCAT_ORDER: + access: rw + description: Select concatenation order + lsb: 12 + reset_value: '0' + width: 2 +- SGPIO_MUX_CFG5: + fields: !!omap + - EXT_CLK_ENABLE: + access: rw + description: Select clock signal + lsb: 0 + reset_value: '0' + width: 1 + - CLK_SOURCE_PIN_MODE: + access: rw + description: Select source clock pin + lsb: 1 + reset_value: '0' + width: 2 + - CLK_SOURCE_SLICE_MODE: + access: rw + description: Select clock source slice + lsb: 3 + reset_value: '0' + width: 2 + - QUALIFIER_MODE: + access: rw + description: Select qualifier mode + lsb: 5 + reset_value: '0' + width: 2 + - QUALIFIER_PIN_MODE: + access: rw + description: Select qualifier pin + lsb: 7 + reset_value: '0' + width: 2 + - QUALIFIER_SLICE_MODE: + access: rw + description: Select qualifier slice + lsb: 9 + reset_value: '0' + width: 2 + - CONCAT_ENABLE: + access: rw + description: Enable concatenation + lsb: 11 + reset_value: '0' + width: 1 + - CONCAT_ORDER: + access: rw + description: Select concatenation order + lsb: 12 + reset_value: '0' + width: 2 +- SGPIO_MUX_CFG6: + fields: !!omap + - EXT_CLK_ENABLE: + access: rw + description: Select clock signal + lsb: 0 + reset_value: '0' + width: 1 + - CLK_SOURCE_PIN_MODE: + access: rw + description: Select source clock pin + lsb: 1 + reset_value: '0' + width: 2 + - CLK_SOURCE_SLICE_MODE: + access: rw + description: Select clock source slice + lsb: 3 + reset_value: '0' + width: 2 + - QUALIFIER_MODE: + access: rw + description: Select qualifier mode + lsb: 5 + reset_value: '0' + width: 2 + - QUALIFIER_PIN_MODE: + access: rw + description: Select qualifier pin + lsb: 7 + reset_value: '0' + width: 2 + - QUALIFIER_SLICE_MODE: + access: rw + description: Select qualifier slice + lsb: 9 + reset_value: '0' + width: 2 + - CONCAT_ENABLE: + access: rw + description: Enable concatenation + lsb: 11 + reset_value: '0' + width: 1 + - CONCAT_ORDER: + access: rw + description: Select concatenation order + lsb: 12 + reset_value: '0' + width: 2 +- SGPIO_MUX_CFG7: + fields: !!omap + - EXT_CLK_ENABLE: + access: rw + description: Select clock signal + lsb: 0 + reset_value: '0' + width: 1 + - CLK_SOURCE_PIN_MODE: + access: rw + description: Select source clock pin + lsb: 1 + reset_value: '0' + width: 2 + - CLK_SOURCE_SLICE_MODE: + access: rw + description: Select clock source slice + lsb: 3 + reset_value: '0' + width: 2 + - QUALIFIER_MODE: + access: rw + description: Select qualifier mode + lsb: 5 + reset_value: '0' + width: 2 + - QUALIFIER_PIN_MODE: + access: rw + description: Select qualifier pin + lsb: 7 + reset_value: '0' + width: 2 + - QUALIFIER_SLICE_MODE: + access: rw + description: Select qualifier slice + lsb: 9 + reset_value: '0' + width: 2 + - CONCAT_ENABLE: + access: rw + description: Enable concatenation + lsb: 11 + reset_value: '0' + width: 1 + - CONCAT_ORDER: + access: rw + description: Select concatenation order + lsb: 12 + reset_value: '0' + width: 2 +- SGPIO_MUX_CFG8: + fields: !!omap + - EXT_CLK_ENABLE: + access: rw + description: Select clock signal + lsb: 0 + reset_value: '0' + width: 1 + - CLK_SOURCE_PIN_MODE: + access: rw + description: Select source clock pin + lsb: 1 + reset_value: '0' + width: 2 + - CLK_SOURCE_SLICE_MODE: + access: rw + description: Select clock source slice + lsb: 3 + reset_value: '0' + width: 2 + - QUALIFIER_MODE: + access: rw + description: Select qualifier mode + lsb: 5 + reset_value: '0' + width: 2 + - QUALIFIER_PIN_MODE: + access: rw + description: Select qualifier pin + lsb: 7 + reset_value: '0' + width: 2 + - QUALIFIER_SLICE_MODE: + access: rw + description: Select qualifier slice + lsb: 9 + reset_value: '0' + width: 2 + - CONCAT_ENABLE: + access: rw + description: Enable concatenation + lsb: 11 + reset_value: '0' + width: 1 + - CONCAT_ORDER: + access: rw + description: Select concatenation order + lsb: 12 + reset_value: '0' + width: 2 +- SGPIO_MUX_CFG9: + fields: !!omap + - EXT_CLK_ENABLE: + access: rw + description: Select clock signal + lsb: 0 + reset_value: '0' + width: 1 + - CLK_SOURCE_PIN_MODE: + access: rw + description: Select source clock pin + lsb: 1 + reset_value: '0' + width: 2 + - CLK_SOURCE_SLICE_MODE: + access: rw + description: Select clock source slice + lsb: 3 + reset_value: '0' + width: 2 + - QUALIFIER_MODE: + access: rw + description: Select qualifier mode + lsb: 5 + reset_value: '0' + width: 2 + - QUALIFIER_PIN_MODE: + access: rw + description: Select qualifier pin + lsb: 7 + reset_value: '0' + width: 2 + - QUALIFIER_SLICE_MODE: + access: rw + description: Select qualifier slice + lsb: 9 + reset_value: '0' + width: 2 + - CONCAT_ENABLE: + access: rw + description: Enable concatenation + lsb: 11 + reset_value: '0' + width: 1 + - CONCAT_ORDER: + access: rw + description: Select concatenation order + lsb: 12 + reset_value: '0' + width: 2 +- SGPIO_MUX_CFG10: + fields: !!omap + - EXT_CLK_ENABLE: + access: rw + description: Select clock signal + lsb: 0 + reset_value: '0' + width: 1 + - CLK_SOURCE_PIN_MODE: + access: rw + description: Select source clock pin + lsb: 1 + reset_value: '0' + width: 2 + - CLK_SOURCE_SLICE_MODE: + access: rw + description: Select clock source slice + lsb: 3 + reset_value: '0' + width: 2 + - QUALIFIER_MODE: + access: rw + description: Select qualifier mode + lsb: 5 + reset_value: '0' + width: 2 + - QUALIFIER_PIN_MODE: + access: rw + description: Select qualifier pin + lsb: 7 + reset_value: '0' + width: 2 + - QUALIFIER_SLICE_MODE: + access: rw + description: Select qualifier slice + lsb: 9 + reset_value: '0' + width: 2 + - CONCAT_ENABLE: + access: rw + description: Enable concatenation + lsb: 11 + reset_value: '0' + width: 1 + - CONCAT_ORDER: + access: rw + description: Select concatenation order + lsb: 12 + reset_value: '0' + width: 2 +- SGPIO_MUX_CFG11: + fields: !!omap + - EXT_CLK_ENABLE: + access: rw + description: Select clock signal + lsb: 0 + reset_value: '0' + width: 1 + - CLK_SOURCE_PIN_MODE: + access: rw + description: Select source clock pin + lsb: 1 + reset_value: '0' + width: 2 + - CLK_SOURCE_SLICE_MODE: + access: rw + description: Select clock source slice + lsb: 3 + reset_value: '0' + width: 2 + - QUALIFIER_MODE: + access: rw + description: Select qualifier mode + lsb: 5 + reset_value: '0' + width: 2 + - QUALIFIER_PIN_MODE: + access: rw + description: Select qualifier pin + lsb: 7 + reset_value: '0' + width: 2 + - QUALIFIER_SLICE_MODE: + access: rw + description: Select qualifier slice + lsb: 9 + reset_value: '0' + width: 2 + - CONCAT_ENABLE: + access: rw + description: Enable concatenation + lsb: 11 + reset_value: '0' + width: 1 + - CONCAT_ORDER: + access: rw + description: Select concatenation order + lsb: 12 + reset_value: '0' + width: 2 +- SGPIO_MUX_CFG12: + fields: !!omap + - EXT_CLK_ENABLE: + access: rw + description: Select clock signal + lsb: 0 + reset_value: '0' + width: 1 + - CLK_SOURCE_PIN_MODE: + access: rw + description: Select source clock pin + lsb: 1 + reset_value: '0' + width: 2 + - CLK_SOURCE_SLICE_MODE: + access: rw + description: Select clock source slice + lsb: 3 + reset_value: '0' + width: 2 + - QUALIFIER_MODE: + access: rw + description: Select qualifier mode + lsb: 5 + reset_value: '0' + width: 2 + - QUALIFIER_PIN_MODE: + access: rw + description: Select qualifier pin + lsb: 7 + reset_value: '0' + width: 2 + - QUALIFIER_SLICE_MODE: + access: rw + description: Select qualifier slice + lsb: 9 + reset_value: '0' + width: 2 + - CONCAT_ENABLE: + access: rw + description: Enable concatenation + lsb: 11 + reset_value: '0' + width: 1 + - CONCAT_ORDER: + access: rw + description: Select concatenation order + lsb: 12 + reset_value: '0' + width: 2 +- SGPIO_MUX_CFG13: + fields: !!omap + - EXT_CLK_ENABLE: + access: rw + description: Select clock signal + lsb: 0 + reset_value: '0' + width: 1 + - CLK_SOURCE_PIN_MODE: + access: rw + description: Select source clock pin + lsb: 1 + reset_value: '0' + width: 2 + - CLK_SOURCE_SLICE_MODE: + access: rw + description: Select clock source slice + lsb: 3 + reset_value: '0' + width: 2 + - QUALIFIER_MODE: + access: rw + description: Select qualifier mode + lsb: 5 + reset_value: '0' + width: 2 + - QUALIFIER_PIN_MODE: + access: rw + description: Select qualifier pin + lsb: 7 + reset_value: '0' + width: 2 + - QUALIFIER_SLICE_MODE: + access: rw + description: Select qualifier slice + lsb: 9 + reset_value: '0' + width: 2 + - CONCAT_ENABLE: + access: rw + description: Enable concatenation + lsb: 11 + reset_value: '0' + width: 1 + - CONCAT_ORDER: + access: rw + description: Select concatenation order + lsb: 12 + reset_value: '0' + width: 2 +- SGPIO_MUX_CFG14: + fields: !!omap + - EXT_CLK_ENABLE: + access: rw + description: Select clock signal + lsb: 0 + reset_value: '0' + width: 1 + - CLK_SOURCE_PIN_MODE: + access: rw + description: Select source clock pin + lsb: 1 + reset_value: '0' + width: 2 + - CLK_SOURCE_SLICE_MODE: + access: rw + description: Select clock source slice + lsb: 3 + reset_value: '0' + width: 2 + - QUALIFIER_MODE: + access: rw + description: Select qualifier mode + lsb: 5 + reset_value: '0' + width: 2 + - QUALIFIER_PIN_MODE: + access: rw + description: Select qualifier pin + lsb: 7 + reset_value: '0' + width: 2 + - QUALIFIER_SLICE_MODE: + access: rw + description: Select qualifier slice + lsb: 9 + reset_value: '0' + width: 2 + - CONCAT_ENABLE: + access: rw + description: Enable concatenation + lsb: 11 + reset_value: '0' + width: 1 + - CONCAT_ORDER: + access: rw + description: Select concatenation order + lsb: 12 + reset_value: '0' + width: 2 +- SGPIO_MUX_CFG15: + fields: !!omap + - EXT_CLK_ENABLE: + access: rw + description: Select clock signal + lsb: 0 + reset_value: '0' + width: 1 + - CLK_SOURCE_PIN_MODE: + access: rw + description: Select source clock pin + lsb: 1 + reset_value: '0' + width: 2 + - CLK_SOURCE_SLICE_MODE: + access: rw + description: Select clock source slice + lsb: 3 + reset_value: '0' + width: 2 + - QUALIFIER_MODE: + access: rw + description: Select qualifier mode + lsb: 5 + reset_value: '0' + width: 2 + - QUALIFIER_PIN_MODE: + access: rw + description: Select qualifier pin + lsb: 7 + reset_value: '0' + width: 2 + - QUALIFIER_SLICE_MODE: + access: rw + description: Select qualifier slice + lsb: 9 + reset_value: '0' + width: 2 + - CONCAT_ENABLE: + access: rw + description: Enable concatenation + lsb: 11 + reset_value: '0' + width: 1 + - CONCAT_ORDER: + access: rw + description: Select concatenation order + lsb: 12 + reset_value: '0' + width: 2 +- SGPIO_SLICE_MUX_CFG0: + fields: !!omap + - MATCH_MODE: + access: rw + description: Match mode + lsb: 0 + reset_value: '0' + width: 1 + - CLK_CAPTURE_MODE: + access: rw + description: Capture clock mode + lsb: 1 + reset_value: '0' + width: 1 + - CLKGEN_MODE: + access: rw + description: Clock generation mode + lsb: 2 + reset_value: '0' + width: 1 + - INV_OUT_CLK: + access: rw + description: Invert output clock + lsb: 3 + reset_value: '0' + width: 1 + - DATA_CAPTURE_MODE: + access: rw + description: Condition for input bit match interrupt + lsb: 4 + reset_value: '0' + width: 2 + - PARALLEL_MODE: + access: rw + description: Parallel mode + lsb: 6 + reset_value: '0' + width: 2 + - INV_QUALIFIER: + access: rw + description: Inversion qualifier + lsb: 8 + reset_value: '0' + width: 1 +- SGPIO_SLICE_MUX_CFG1: + fields: !!omap + - MATCH_MODE: + access: rw + description: Match mode + lsb: 0 + reset_value: '0' + width: 1 + - CLK_CAPTURE_MODE: + access: rw + description: Capture clock mode + lsb: 1 + reset_value: '0' + width: 1 + - CLKGEN_MODE: + access: rw + description: Clock generation mode + lsb: 2 + reset_value: '0' + width: 1 + - INV_OUT_CLK: + access: rw + description: Invert output clock + lsb: 3 + reset_value: '0' + width: 1 + - DATA_CAPTURE_MODE: + access: rw + description: Condition for input bit match interrupt + lsb: 4 + reset_value: '0' + width: 2 + - PARALLEL_MODE: + access: rw + description: Parallel mode + lsb: 6 + reset_value: '0' + width: 2 + - INV_QUALIFIER: + access: rw + description: Inversion qualifier + lsb: 8 + reset_value: '0' + width: 1 +- SGPIO_SLICE_MUX_CFG2: + fields: !!omap + - MATCH_MODE: + access: rw + description: Match mode + lsb: 0 + reset_value: '0' + width: 1 + - CLK_CAPTURE_MODE: + access: rw + description: Capture clock mode + lsb: 1 + reset_value: '0' + width: 1 + - CLKGEN_MODE: + access: rw + description: Clock generation mode + lsb: 2 + reset_value: '0' + width: 1 + - INV_OUT_CLK: + access: rw + description: Invert output clock + lsb: 3 + reset_value: '0' + width: 1 + - DATA_CAPTURE_MODE: + access: rw + description: Condition for input bit match interrupt + lsb: 4 + reset_value: '0' + width: 2 + - PARALLEL_MODE: + access: rw + description: Parallel mode + lsb: 6 + reset_value: '0' + width: 2 + - INV_QUALIFIER: + access: rw + description: Inversion qualifier + lsb: 8 + reset_value: '0' + width: 1 +- SGPIO_SLICE_MUX_CFG3: + fields: !!omap + - MATCH_MODE: + access: rw + description: Match mode + lsb: 0 + reset_value: '0' + width: 1 + - CLK_CAPTURE_MODE: + access: rw + description: Capture clock mode + lsb: 1 + reset_value: '0' + width: 1 + - CLKGEN_MODE: + access: rw + description: Clock generation mode + lsb: 2 + reset_value: '0' + width: 1 + - INV_OUT_CLK: + access: rw + description: Invert output clock + lsb: 3 + reset_value: '0' + width: 1 + - DATA_CAPTURE_MODE: + access: rw + description: Condition for input bit match interrupt + lsb: 4 + reset_value: '0' + width: 2 + - PARALLEL_MODE: + access: rw + description: Parallel mode + lsb: 6 + reset_value: '0' + width: 2 + - INV_QUALIFIER: + access: rw + description: Inversion qualifier + lsb: 8 + reset_value: '0' + width: 1 +- SGPIO_SLICE_MUX_CFG4: + fields: !!omap + - MATCH_MODE: + access: rw + description: Match mode + lsb: 0 + reset_value: '0' + width: 1 + - CLK_CAPTURE_MODE: + access: rw + description: Capture clock mode + lsb: 1 + reset_value: '0' + width: 1 + - CLKGEN_MODE: + access: rw + description: Clock generation mode + lsb: 2 + reset_value: '0' + width: 1 + - INV_OUT_CLK: + access: rw + description: Invert output clock + lsb: 3 + reset_value: '0' + width: 1 + - DATA_CAPTURE_MODE: + access: rw + description: Condition for input bit match interrupt + lsb: 4 + reset_value: '0' + width: 2 + - PARALLEL_MODE: + access: rw + description: Parallel mode + lsb: 6 + reset_value: '0' + width: 2 + - INV_QUALIFIER: + access: rw + description: Inversion qualifier + lsb: 8 + reset_value: '0' + width: 1 +- SGPIO_SLICE_MUX_CFG5: + fields: !!omap + - MATCH_MODE: + access: rw + description: Match mode + lsb: 0 + reset_value: '0' + width: 1 + - CLK_CAPTURE_MODE: + access: rw + description: Capture clock mode + lsb: 1 + reset_value: '0' + width: 1 + - CLKGEN_MODE: + access: rw + description: Clock generation mode + lsb: 2 + reset_value: '0' + width: 1 + - INV_OUT_CLK: + access: rw + description: Invert output clock + lsb: 3 + reset_value: '0' + width: 1 + - DATA_CAPTURE_MODE: + access: rw + description: Condition for input bit match interrupt + lsb: 4 + reset_value: '0' + width: 2 + - PARALLEL_MODE: + access: rw + description: Parallel mode + lsb: 6 + reset_value: '0' + width: 2 + - INV_QUALIFIER: + access: rw + description: Inversion qualifier + lsb: 8 + reset_value: '0' + width: 1 +- SGPIO_SLICE_MUX_CFG6: + fields: !!omap + - MATCH_MODE: + access: rw + description: Match mode + lsb: 0 + reset_value: '0' + width: 1 + - CLK_CAPTURE_MODE: + access: rw + description: Capture clock mode + lsb: 1 + reset_value: '0' + width: 1 + - CLKGEN_MODE: + access: rw + description: Clock generation mode + lsb: 2 + reset_value: '0' + width: 1 + - INV_OUT_CLK: + access: rw + description: Invert output clock + lsb: 3 + reset_value: '0' + width: 1 + - DATA_CAPTURE_MODE: + access: rw + description: Condition for input bit match interrupt + lsb: 4 + reset_value: '0' + width: 2 + - PARALLEL_MODE: + access: rw + description: Parallel mode + lsb: 6 + reset_value: '0' + width: 2 + - INV_QUALIFIER: + access: rw + description: Inversion qualifier + lsb: 8 + reset_value: '0' + width: 1 +- SGPIO_SLICE_MUX_CFG7: + fields: !!omap + - MATCH_MODE: + access: rw + description: Match mode + lsb: 0 + reset_value: '0' + width: 1 + - CLK_CAPTURE_MODE: + access: rw + description: Capture clock mode + lsb: 1 + reset_value: '0' + width: 1 + - CLKGEN_MODE: + access: rw + description: Clock generation mode + lsb: 2 + reset_value: '0' + width: 1 + - INV_OUT_CLK: + access: rw + description: Invert output clock + lsb: 3 + reset_value: '0' + width: 1 + - DATA_CAPTURE_MODE: + access: rw + description: Condition for input bit match interrupt + lsb: 4 + reset_value: '0' + width: 2 + - PARALLEL_MODE: + access: rw + description: Parallel mode + lsb: 6 + reset_value: '0' + width: 2 + - INV_QUALIFIER: + access: rw + description: Inversion qualifier + lsb: 8 + reset_value: '0' + width: 1 +- SGPIO_SLICE_MUX_CFG8: + fields: !!omap + - MATCH_MODE: + access: rw + description: Match mode + lsb: 0 + reset_value: '0' + width: 1 + - CLK_CAPTURE_MODE: + access: rw + description: Capture clock mode + lsb: 1 + reset_value: '0' + width: 1 + - CLKGEN_MODE: + access: rw + description: Clock generation mode + lsb: 2 + reset_value: '0' + width: 1 + - INV_OUT_CLK: + access: rw + description: Invert output clock + lsb: 3 + reset_value: '0' + width: 1 + - DATA_CAPTURE_MODE: + access: rw + description: Condition for input bit match interrupt + lsb: 4 + reset_value: '0' + width: 2 + - PARALLEL_MODE: + access: rw + description: Parallel mode + lsb: 6 + reset_value: '0' + width: 2 + - INV_QUALIFIER: + access: rw + description: Inversion qualifier + lsb: 8 + reset_value: '0' + width: 1 +- SGPIO_SLICE_MUX_CFG9: + fields: !!omap + - MATCH_MODE: + access: rw + description: Match mode + lsb: 0 + reset_value: '0' + width: 1 + - CLK_CAPTURE_MODE: + access: rw + description: Capture clock mode + lsb: 1 + reset_value: '0' + width: 1 + - CLKGEN_MODE: + access: rw + description: Clock generation mode + lsb: 2 + reset_value: '0' + width: 1 + - INV_OUT_CLK: + access: rw + description: Invert output clock + lsb: 3 + reset_value: '0' + width: 1 + - DATA_CAPTURE_MODE: + access: rw + description: Condition for input bit match interrupt + lsb: 4 + reset_value: '0' + width: 2 + - PARALLEL_MODE: + access: rw + description: Parallel mode + lsb: 6 + reset_value: '0' + width: 2 + - INV_QUALIFIER: + access: rw + description: Inversion qualifier + lsb: 8 + reset_value: '0' + width: 1 +- SGPIO_SLICE_MUX_CFG10: + fields: !!omap + - MATCH_MODE: + access: rw + description: Match mode + lsb: 0 + reset_value: '0' + width: 1 + - CLK_CAPTURE_MODE: + access: rw + description: Capture clock mode + lsb: 1 + reset_value: '0' + width: 1 + - CLKGEN_MODE: + access: rw + description: Clock generation mode + lsb: 2 + reset_value: '0' + width: 1 + - INV_OUT_CLK: + access: rw + description: Invert output clock + lsb: 3 + reset_value: '0' + width: 1 + - DATA_CAPTURE_MODE: + access: rw + description: Condition for input bit match interrupt + lsb: 4 + reset_value: '0' + width: 2 + - PARALLEL_MODE: + access: rw + description: Parallel mode + lsb: 6 + reset_value: '0' + width: 2 + - INV_QUALIFIER: + access: rw + description: Inversion qualifier + lsb: 8 + reset_value: '0' + width: 1 +- SGPIO_SLICE_MUX_CFG11: + fields: !!omap + - MATCH_MODE: + access: rw + description: Match mode + lsb: 0 + reset_value: '0' + width: 1 + - CLK_CAPTURE_MODE: + access: rw + description: Capture clock mode + lsb: 1 + reset_value: '0' + width: 1 + - CLKGEN_MODE: + access: rw + description: Clock generation mode + lsb: 2 + reset_value: '0' + width: 1 + - INV_OUT_CLK: + access: rw + description: Invert output clock + lsb: 3 + reset_value: '0' + width: 1 + - DATA_CAPTURE_MODE: + access: rw + description: Condition for input bit match interrupt + lsb: 4 + reset_value: '0' + width: 2 + - PARALLEL_MODE: + access: rw + description: Parallel mode + lsb: 6 + reset_value: '0' + width: 2 + - INV_QUALIFIER: + access: rw + description: Inversion qualifier + lsb: 8 + reset_value: '0' + width: 1 +- SGPIO_SLICE_MUX_CFG12: + fields: !!omap + - MATCH_MODE: + access: rw + description: Match mode + lsb: 0 + reset_value: '0' + width: 1 + - CLK_CAPTURE_MODE: + access: rw + description: Capture clock mode + lsb: 1 + reset_value: '0' + width: 1 + - CLKGEN_MODE: + access: rw + description: Clock generation mode + lsb: 2 + reset_value: '0' + width: 1 + - INV_OUT_CLK: + access: rw + description: Invert output clock + lsb: 3 + reset_value: '0' + width: 1 + - DATA_CAPTURE_MODE: + access: rw + description: Condition for input bit match interrupt + lsb: 4 + reset_value: '0' + width: 2 + - PARALLEL_MODE: + access: rw + description: Parallel mode + lsb: 6 + reset_value: '0' + width: 2 + - INV_QUALIFIER: + access: rw + description: Inversion qualifier + lsb: 8 + reset_value: '0' + width: 1 +- SGPIO_SLICE_MUX_CFG13: + fields: !!omap + - MATCH_MODE: + access: rw + description: Match mode + lsb: 0 + reset_value: '0' + width: 1 + - CLK_CAPTURE_MODE: + access: rw + description: Capture clock mode + lsb: 1 + reset_value: '0' + width: 1 + - CLKGEN_MODE: + access: rw + description: Clock generation mode + lsb: 2 + reset_value: '0' + width: 1 + - INV_OUT_CLK: + access: rw + description: Invert output clock + lsb: 3 + reset_value: '0' + width: 1 + - DATA_CAPTURE_MODE: + access: rw + description: Condition for input bit match interrupt + lsb: 4 + reset_value: '0' + width: 2 + - PARALLEL_MODE: + access: rw + description: Parallel mode + lsb: 6 + reset_value: '0' + width: 2 + - INV_QUALIFIER: + access: rw + description: Inversion qualifier + lsb: 8 + reset_value: '0' + width: 1 +- SGPIO_SLICE_MUX_CFG14: + fields: !!omap + - MATCH_MODE: + access: rw + description: Match mode + lsb: 0 + reset_value: '0' + width: 1 + - CLK_CAPTURE_MODE: + access: rw + description: Capture clock mode + lsb: 1 + reset_value: '0' + width: 1 + - CLKGEN_MODE: + access: rw + description: Clock generation mode + lsb: 2 + reset_value: '0' + width: 1 + - INV_OUT_CLK: + access: rw + description: Invert output clock + lsb: 3 + reset_value: '0' + width: 1 + - DATA_CAPTURE_MODE: + access: rw + description: Condition for input bit match interrupt + lsb: 4 + reset_value: '0' + width: 2 + - PARALLEL_MODE: + access: rw + description: Parallel mode + lsb: 6 + reset_value: '0' + width: 2 + - INV_QUALIFIER: + access: rw + description: Inversion qualifier + lsb: 8 + reset_value: '0' + width: 1 +- SGPIO_SLICE_MUX_CFG15: + fields: !!omap + - MATCH_MODE: + access: rw + description: Match mode + lsb: 0 + reset_value: '0' + width: 1 + - CLK_CAPTURE_MODE: + access: rw + description: Capture clock mode + lsb: 1 + reset_value: '0' + width: 1 + - CLKGEN_MODE: + access: rw + description: Clock generation mode + lsb: 2 + reset_value: '0' + width: 1 + - INV_OUT_CLK: + access: rw + description: Invert output clock + lsb: 3 + reset_value: '0' + width: 1 + - DATA_CAPTURE_MODE: + access: rw + description: Condition for input bit match interrupt + lsb: 4 + reset_value: '0' + width: 2 + - PARALLEL_MODE: + access: rw + description: Parallel mode + lsb: 6 + reset_value: '0' + width: 2 + - INV_QUALIFIER: + access: rw + description: Inversion qualifier + lsb: 8 + reset_value: '0' + width: 1 +- SGPIO_POS0: + fields: !!omap + - POS: + access: rw + description: Each time COUNT reaches 0x0 POS counts down + lsb: 0 + reset_value: '0' + width: 8 + - POS_RESET: + access: rw + description: Reload value for POS after POS reaches 0x0 + lsb: 8 + reset_value: '0' + width: 8 +- SGPIO_POS1: + fields: !!omap + - POS: + access: rw + description: Each time COUNT reaches 0x0 POS counts down + lsb: 0 + reset_value: '0' + width: 8 + - POS_RESET: + access: rw + description: Reload value for POS after POS reaches 0x0 + lsb: 8 + reset_value: '0' + width: 8 +- SGPIO_POS2: + fields: !!omap + - POS: + access: rw + description: Each time COUNT reaches 0x0 POS counts down + lsb: 0 + reset_value: '0' + width: 8 + - POS_RESET: + access: rw + description: Reload value for POS after POS reaches 0x0 + lsb: 8 + reset_value: '0' + width: 8 +- SGPIO_POS3: + fields: !!omap + - POS: + access: rw + description: Each time COUNT reaches 0x0 POS counts down + lsb: 0 + reset_value: '0' + width: 8 + - POS_RESET: + access: rw + description: Reload value for POS after POS reaches 0x0 + lsb: 8 + reset_value: '0' + width: 8 +- SGPIO_POS4: + fields: !!omap + - POS: + access: rw + description: Each time COUNT reaches 0x0 POS counts down + lsb: 0 + reset_value: '0' + width: 8 + - POS_RESET: + access: rw + description: Reload value for POS after POS reaches 0x0 + lsb: 8 + reset_value: '0' + width: 8 +- SGPIO_POS5: + fields: !!omap + - POS: + access: rw + description: Each time COUNT reaches 0x0 POS counts down + lsb: 0 + reset_value: '0' + width: 8 + - POS_RESET: + access: rw + description: Reload value for POS after POS reaches 0x0 + lsb: 8 + reset_value: '0' + width: 8 +- SGPIO_POS6: + fields: !!omap + - POS: + access: rw + description: Each time COUNT reaches 0x0 POS counts down + lsb: 0 + reset_value: '0' + width: 8 + - POS_RESET: + access: rw + description: Reload value for POS after POS reaches 0x0 + lsb: 8 + reset_value: '0' + width: 8 +- SGPIO_POS7: + fields: !!omap + - POS: + access: rw + description: Each time COUNT reaches 0x0 POS counts down + lsb: 0 + reset_value: '0' + width: 8 + - POS_RESET: + access: rw + description: Reload value for POS after POS reaches 0x0 + lsb: 8 + reset_value: '0' + width: 8 +- SGPIO_POS8: + fields: !!omap + - POS: + access: rw + description: Each time COUNT reaches 0x0 POS counts down + lsb: 0 + reset_value: '0' + width: 8 + - POS_RESET: + access: rw + description: Reload value for POS after POS reaches 0x0 + lsb: 8 + reset_value: '0' + width: 8 +- SGPIO_POS9: + fields: !!omap + - POS: + access: rw + description: Each time COUNT reaches 0x0 POS counts down + lsb: 0 + reset_value: '0' + width: 8 + - POS_RESET: + access: rw + description: Reload value for POS after POS reaches 0x0 + lsb: 8 + reset_value: '0' + width: 8 +- SGPIO_POS10: + fields: !!omap + - POS: + access: rw + description: Each time COUNT reaches 0x0 POS counts down + lsb: 0 + reset_value: '0' + width: 8 + - POS_RESET: + access: rw + description: Reload value for POS after POS reaches 0x0 + lsb: 8 + reset_value: '0' + width: 8 +- SGPIO_POS11: + fields: !!omap + - POS: + access: rw + description: Each time COUNT reaches 0x0 POS counts down + lsb: 0 + reset_value: '0' + width: 8 + - POS_RESET: + access: rw + description: Reload value for POS after POS reaches 0x0 + lsb: 8 + reset_value: '0' + width: 8 +- SGPIO_POS12: + fields: !!omap + - POS: + access: rw + description: Each time COUNT reaches 0x0 POS counts down + lsb: 0 + reset_value: '0' + width: 8 + - POS_RESET: + access: rw + description: Reload value for POS after POS reaches 0x0 + lsb: 8 + reset_value: '0' + width: 8 +- SGPIO_POS13: + fields: !!omap + - POS: + access: rw + description: Each time COUNT reaches 0x0 POS counts down + lsb: 0 + reset_value: '0' + width: 8 + - POS_RESET: + access: rw + description: Reload value for POS after POS reaches 0x0 + lsb: 8 + reset_value: '0' + width: 8 +- SGPIO_POS14: + fields: !!omap + - POS: + access: rw + description: Each time COUNT reaches 0x0 POS counts down + lsb: 0 + reset_value: '0' + width: 8 + - POS_RESET: + access: rw + description: Reload value for POS after POS reaches 0x0 + lsb: 8 + reset_value: '0' + width: 8 +- SGPIO_POS15: + fields: !!omap + - POS: + access: rw + description: Each time COUNT reaches 0x0 POS counts down + lsb: 0 + reset_value: '0' + width: 8 + - POS_RESET: + access: rw + description: Reload value for POS after POS reaches 0x0 + lsb: 8 + reset_value: '0' + width: 8 diff --git a/libopencm3/scripts/data/lpc43xx/ssp.yaml b/libopencm3/scripts/data/lpc43xx/ssp.yaml new file mode 100644 index 0000000..54b440b --- /dev/null +++ b/libopencm3/scripts/data/lpc43xx/ssp.yaml @@ -0,0 +1,445 @@ +!!omap +- SSP0_CR0: + fields: !!omap + - DSS: + access: rw + description: Data Size Select + lsb: 0 + reset_value: '0' + width: 4 + - FRF: + access: rw + description: Frame Format + lsb: 4 + reset_value: '0' + width: 2 + - CPOL: + access: rw + description: Clock Out Polarity + lsb: 6 + reset_value: '0' + width: 1 + - CPHA: + access: rw + description: Clock Out Phase + lsb: 7 + reset_value: '0' + width: 1 + - SCR: + access: rw + description: Serial Clock Rate + lsb: 8 + reset_value: '0' + width: 8 +- SSP1_CR0: + fields: !!omap + - DSS: + access: rw + description: Data Size Select + lsb: 0 + reset_value: '0' + width: 4 + - FRF: + access: rw + description: Frame Format + lsb: 4 + reset_value: '0' + width: 2 + - CPOL: + access: rw + description: Clock Out Polarity + lsb: 6 + reset_value: '0' + width: 1 + - CPHA: + access: rw + description: Clock Out Phase + lsb: 7 + reset_value: '0' + width: 1 + - SCR: + access: rw + description: Serial Clock Rate + lsb: 8 + reset_value: '0' + width: 8 +- SSP0_CR1: + fields: !!omap + - LBM: + access: rw + description: Loop Back Mode + lsb: 0 + reset_value: '0' + width: 1 + - SSE: + access: rw + description: SSP Enable + lsb: 1 + reset_value: '0' + width: 1 + - MS: + access: rw + description: Master/Slave Mode + lsb: 2 + reset_value: '0' + width: 1 + - SOD: + access: rw + description: Slave Output Disable + lsb: 3 + reset_value: '0' + width: 1 +- SSP1_CR1: + fields: !!omap + - SSE: + access: rw + description: SSP Enable + lsb: 1 + reset_value: '0' + width: 1 + - MS: + access: rw + description: Master/Slave Mode + lsb: 2 + reset_value: '0' + width: 1 + - SOD: + access: rw + description: Slave Output Disable + lsb: 3 + reset_value: '0' + width: 1 +- SSP0_DR: + fields: !!omap + - DATA: + access: rw + description: Software can write data to be transmitted to this register, and + read data that has been + lsb: 0 + reset_value: '0' + width: 16 +- SSP1_DR: + fields: !!omap + - DATA: + access: rw + description: Software can write data to be transmitted to this register, and + read data that has been + lsb: 0 + reset_value: '0' + width: 16 +- SSP0_SR: + fields: !!omap + - TFE: + access: r + description: Transmit FIFO Empty + lsb: 0 + reset_value: '1' + width: 1 + - TNF: + access: r + description: Transmit FIFO Not Full + lsb: 1 + reset_value: '1' + width: 1 + - RNE: + access: r + description: Receive FIFO Not Empty + lsb: 2 + reset_value: '0' + width: 1 + - RFF: + access: r + description: Receive FIFO Full + lsb: 3 + reset_value: '0' + width: 1 + - BSY: + access: r + description: Busy. + lsb: 4 + reset_value: '0' + width: 1 +- SSP1_SR: + fields: !!omap + - TFE: + access: r + description: Transmit FIFO Empty + lsb: 0 + reset_value: '1' + width: 1 + - TNF: + access: r + description: Transmit FIFO Not Full + lsb: 1 + reset_value: '1' + width: 1 + - RNE: + access: r + description: Receive FIFO Not Empty + lsb: 2 + reset_value: '0' + width: 1 + - RFF: + access: r + description: Receive FIFO Full + lsb: 3 + reset_value: '0' + width: 1 + - BSY: + access: r + description: Busy. + lsb: 4 + reset_value: '0' + width: 1 +- SSP0_CPSR: + fields: !!omap + - CPSDVSR: + access: rw + description: SSP Clock Prescale Register + lsb: 0 + reset_value: '0' + width: 8 +- SSP1_CPSR: + fields: !!omap + - CPSDVSR: + access: rw + description: SSP Clock Prescale Register + lsb: 0 + reset_value: '0' + width: 8 +- SSP0_IMSC: + fields: !!omap + - RORIM: + access: rw + description: Software should set this bit to enable interrupt when a Receive + Overrun occurs + lsb: 0 + reset_value: '0' + width: 1 + - RTIM: + access: rw + description: Software should set this bit to enable interrupt when a Receive + Time-out condition occurs + lsb: 1 + reset_value: '0' + width: 1 + - RXIM: + access: rw + description: Software should set this bit to enable interrupt when the Rx + FIFO is at least half full + lsb: 2 + reset_value: '0' + width: 1 + - TXIM: + access: rw + description: Software should set this bit to enable interrupt when the Tx + FIFO is at least half empty + lsb: 3 + reset_value: '0' + width: 1 +- SSP1_IMSC: + fields: !!omap + - RORIM: + access: rw + description: Software should set this bit to enable interrupt when a Receive + Overrun occurs + lsb: 0 + reset_value: '0' + width: 1 + - RTIM: + access: rw + description: Software should set this bit to enable interrupt when a Receive + Time-out condition occurs + lsb: 1 + reset_value: '0' + width: 1 + - RXIM: + access: rw + description: Software should set this bit to enable interrupt when the Rx + FIFO is at least half full + lsb: 2 + reset_value: '0' + width: 1 + - TXIM: + access: rw + description: Software should set this bit to enable interrupt when the Tx + FIFO is at least half empty + lsb: 3 + reset_value: '0' + width: 1 +- SSP0_RIS: + fields: !!omap + - RORRIS: + access: r + description: This bit is 1 if another frame was completely received while + the RxFIFO was full + lsb: 0 + reset_value: '0' + width: 1 + - RTRIS: + access: r + description: This bit is 1 if the Rx FIFO is not empty, and has not been read + for a time-out period + lsb: 1 + reset_value: '0' + width: 1 + - RXRIS: + access: r + description: This bit is 1 if the Rx FIFO is at least half full + lsb: 2 + reset_value: '0' + width: 1 + - TXRIS: + access: r + description: This bit is 1 if the Tx FIFO is at least half empty + lsb: 3 + reset_value: '1' + width: 1 +- SSP1_RIS: + fields: !!omap + - RORRIS: + access: r + description: This bit is 1 if another frame was completely received while + the RxFIFO was full + lsb: 0 + reset_value: '0' + width: 1 + - RTRIS: + access: r + description: This bit is 1 if the Rx FIFO is not empty, and has not been read + for a time-out period + lsb: 1 + reset_value: '0' + width: 1 + - RXRIS: + access: r + description: This bit is 1 if the Rx FIFO is at least half full + lsb: 2 + reset_value: '0' + width: 1 + - TXRIS: + access: r + description: This bit is 1 if the Tx FIFO is at least half empty + lsb: 3 + reset_value: '1' + width: 1 +- SSP0_MIS: + fields: !!omap + - RORMIS: + access: r + description: This bit is 1 if another frame was completely received while + the RxFIFO was full, and this interrupt is enabled + lsb: 0 + reset_value: '0' + width: 1 + - RTMIS: + access: r + description: This bit is 1 if the Rx FIFO is not empty, has not been read + for a time-out period, and this interrupt is enabled + lsb: 1 + reset_value: '0' + width: 1 + - RXMIS: + access: r + description: This bit is 1 if the Rx FIFO is at least half full, and this + interrupt is enabled + lsb: 2 + reset_value: '0' + width: 1 + - TXMIS: + access: r + description: This bit is 1 if the Tx FIFO is at least half empty, and this + interrupt is enabled + lsb: 3 + reset_value: '0' + width: 1 +- SSP1_MIS: + fields: !!omap + - RORMIS: + access: r + description: This bit is 1 if another frame was completely received while + the RxFIFO was full, and this interrupt is enabled + lsb: 0 + reset_value: '0' + width: 1 + - RTMIS: + access: r + description: This bit is 1 if the Rx FIFO is not empty, has not been read + for a time-out period, and this interrupt is enabled + lsb: 1 + reset_value: '0' + width: 1 + - RXMIS: + access: r + description: This bit is 1 if the Rx FIFO is at least half full, and this + interrupt is enabled + lsb: 2 + reset_value: '0' + width: 1 + - TXMIS: + access: r + description: This bit is 1 if the Tx FIFO is at least half empty, and this + interrupt is enabled + lsb: 3 + reset_value: '0' + width: 1 +- SSP0_ICR: + fields: !!omap + - RORIC: + access: w + description: Writing a 1 to this bit clears the 'frame was received when RxFIFO + was full' interrupt + lsb: 0 + reset_value: '' + width: 1 + - RTIC: + access: w + description: Writing a 1 to this bit clears the Rx FIFO was not empty and + has not been read for a time-out period interrupt + lsb: 1 + reset_value: '' + width: 1 +- SSP1_ICR: + fields: !!omap + - RORIC: + access: w + description: Writing a 1 to this bit clears the 'frame was received when RxFIFO + was full' interrupt + lsb: 0 + reset_value: '' + width: 1 + - RTIC: + access: w + description: Writing a 1 to this bit clears the Rx FIFO was not empty and + has not been read for a time-out period interrupt + lsb: 1 + reset_value: '' + width: 1 +- SSP0_DMACR: + fields: !!omap + - RXDMAE: + access: rw + description: Receive DMA Enable + lsb: 0 + reset_value: '0' + width: 1 + - TXDMAE: + access: rw + description: Transmit DMA Enable + lsb: 1 + reset_value: '0' + width: 1 +- SSP1_DMACR: + fields: !!omap + - RXDMAE: + access: rw + description: Receive DMA Enable + lsb: 0 + reset_value: '0' + width: 1 + - TXDMAE: + access: rw + description: Transmit DMA Enable + lsb: 1 + reset_value: '0' + width: 1 diff --git a/libopencm3/scripts/data/lpc43xx/usb.yaml b/libopencm3/scripts/data/lpc43xx/usb.yaml new file mode 100644 index 0000000..658a806 --- /dev/null +++ b/libopencm3/scripts/data/lpc43xx/usb.yaml @@ -0,0 +1,1416 @@ +!!omap +- USB0_CAPLENGTH: + fields: !!omap + - CAPLENGTH: + access: r + description: Indicates offset to add to the register base address at the beginning + of the Operational Register + lsb: 0 + reset_value: '0x40' + width: 8 + - HCIVERSION: + access: r + description: BCD encoding of the EHCI revision number supported by this host + controller + lsb: 8 + reset_value: '0x100' + width: 16 +- USB0_HCSPARAMS: + fields: !!omap + - N_PORTS: + access: r + description: Number of downstream ports + lsb: 0 + reset_value: '0x1' + width: 4 + - PPC: + access: r + description: Port Power Control + lsb: 4 + reset_value: '0x1' + width: 1 + - N_PCC: + access: r + description: Number of Ports per Companion Controller + lsb: 8 + reset_value: '0x0' + width: 4 + - N_CC: + access: r + description: Number of Companion Controller + lsb: 12 + reset_value: '0x0' + width: 4 + - PI: + access: r + description: Port indicators + lsb: 16 + reset_value: '0x1' + width: 1 + - N_PTT: + access: r + description: Number of Ports per Transaction Translator + lsb: 20 + reset_value: '0x0' + width: 4 + - N_TT: + access: r + description: Number of Transaction Translators + lsb: 24 + reset_value: '0x0' + width: 4 +- USB0_HCCPARAMS: + fields: !!omap + - ADC: + access: r + description: 64-bit Addressing Capability + lsb: 0 + reset_value: '0' + width: 1 + - PFL: + access: r + description: Programmable Frame List Flag + lsb: 1 + reset_value: '1' + width: 1 + - ASP: + access: r + description: Asynchronous Schedule Park Capability + lsb: 2 + reset_value: '1' + width: 1 + - IST: + access: r + description: Isochronous Scheduling Threshold + lsb: 4 + reset_value: '0' + width: 4 + - EECP: + access: r + description: EHCI Extended Capabilities Pointer + lsb: 8 + reset_value: '0' + width: 4 +- USB0_DCCPARAMS: + fields: !!omap + - DEN: + access: r + description: Device Endpoint Number + lsb: 0 + reset_value: '0x4' + width: 5 + - DC: + access: r + description: Device Capable + lsb: 7 + reset_value: '0x1' + width: 1 + - HC: + access: r + description: Host Capable + lsb: 8 + reset_value: '0x1' + width: 1 +- USB0_USBCMD_D: + fields: !!omap + - RS: + access: rw + description: Run/Stop + lsb: 0 + reset_value: '0' + width: 1 + - RST: + access: rw + description: Controller reset + lsb: 1 + reset_value: '0' + width: 1 + - SUTW: + access: rw + description: Setup trip wire + lsb: 13 + reset_value: '0' + width: 1 + - ATDTW: + access: rw + description: Add dTD trip wire + lsb: 14 + reset_value: '0' + width: 1 + - ITC: + access: rw + description: Interrupt threshold control + lsb: 16 + reset_value: '0x8' + width: 8 +- USB0_USBCMD_H: + fields: !!omap + - RS: + access: rw + description: Run/Stop + lsb: 0 + reset_value: '0' + width: 1 + - RST: + access: rw + description: Controller reset + lsb: 1 + reset_value: '0' + width: 1 + - FS0: + access: '' + description: Bit 0 of the Frame List Size bits + lsb: 2 + reset_value: '0' + width: 1 + - FS1: + access: '' + description: Bit 1 of the Frame List Size bits + lsb: 3 + reset_value: '0' + width: 1 + - PSE: + access: rw + description: This bit controls whether the host controller skips processing + the periodic schedule + lsb: 4 + reset_value: '0' + width: 1 + - ASE: + access: rw + description: This bit controls whether the host controller skips processing + the asynchronous schedule + lsb: 5 + reset_value: '0' + width: 1 + - IAA: + access: rw + description: This bit is used as a doorbell by software to tell the host controller + to issue an interrupt the next time it advances asynchronous schedule + lsb: 6 + reset_value: '0' + width: 1 + - ASP1_0: + access: rw + description: Asynchronous schedule park mode + lsb: 8 + reset_value: '0x3' + width: 2 + - ASPE: + access: rw + description: Asynchronous Schedule Park Mode Enable + lsb: 11 + reset_value: '1' + width: 1 + - FS2: + access: '' + description: Bit 2 of the Frame List Size bits + lsb: 15 + reset_value: '0' + width: 1 + - ITC: + access: rw + description: Interrupt threshold control + lsb: 16 + reset_value: '0x8' + width: 8 +- USB0_USBSTS_D: + fields: !!omap + - UI: + access: rwc + description: USB interrupt + lsb: 0 + reset_value: '0' + width: 1 + - UEI: + access: rwc + description: USB error interrupt + lsb: 1 + reset_value: '0' + width: 1 + - PCI: + access: rwc + description: Port change detect + lsb: 2 + reset_value: '0' + width: 1 + - URI: + access: rwc + description: USB reset received + lsb: 6 + reset_value: '0' + width: 1 + - SRI: + access: rwc + description: SOF received + lsb: 7 + reset_value: '0' + width: 1 + - SLI: + access: rwc + description: DCSuspend + lsb: 8 + reset_value: '0' + width: 1 + - NAKI: + access: r + description: NAK interrupt bit + lsb: 16 + reset_value: '0' + width: 1 +- USB0_USBSTS_H: + fields: !!omap + - UI: + access: rwc + description: USB interrupt + lsb: 0 + reset_value: '0' + width: 1 + - UEI: + access: rwc + description: USB error interrupt + lsb: 1 + reset_value: '0' + width: 1 + - PCI: + access: rwc + description: Port change detect + lsb: 2 + reset_value: '0' + width: 1 + - FRI: + access: rwc + description: Frame list roll-over + lsb: 3 + reset_value: '0' + width: 1 + - AAI: + access: rwc + description: Interrupt on async advance + lsb: 5 + reset_value: '0' + width: 1 + - SRI: + access: rwc + description: SOF received + lsb: 7 + reset_value: '0' + width: 1 + - HCH: + access: r + description: HCHalted + lsb: 12 + reset_value: '1' + width: 1 + - RCL: + access: r + description: Reclamation + lsb: 13 + reset_value: '0' + width: 1 + - PS: + access: r + description: Periodic schedule status + lsb: 14 + reset_value: '0' + width: 1 + - AS: + access: '' + description: Asynchronous schedule status + lsb: 15 + reset_value: '0' + width: 1 + - UAI: + access: rwc + description: USB host asynchronous interrupt (USBHSTASYNCINT) + lsb: 18 + reset_value: '0' + width: 1 + - UPI: + access: rwc + description: USB host periodic interrupt (USBHSTPERINT) + lsb: 19 + reset_value: '0' + width: 1 +- USB0_USBINTR_D: + fields: !!omap + - UE: + access: rw + description: USB interrupt enable + lsb: 0 + reset_value: '0' + width: 1 + - UEE: + access: rw + description: USB error interrupt enable + lsb: 1 + reset_value: '0' + width: 1 + - PCE: + access: rw + description: Port change detect enable + lsb: 2 + reset_value: '0' + width: 1 + - URE: + access: rw + description: USB reset enable + lsb: 6 + reset_value: '0' + width: 1 + - SRE: + access: rw + description: SOF received enable + lsb: 7 + reset_value: '0' + width: 1 + - SLE: + access: rw + description: Sleep enable + lsb: 8 + reset_value: '0' + width: 1 + - NAKE: + access: rw + description: NAK interrupt enable + lsb: 16 + reset_value: '0' + width: 1 +- USB0_USBINTR_H: + fields: !!omap + - UE: + access: rw + description: USB interrupt enable + lsb: 0 + reset_value: '0' + width: 1 + - UEE: + access: rw + description: USB error interrupt enable + lsb: 1 + reset_value: '0' + width: 1 + - PCE: + access: rw + description: Port change detect enable + lsb: 2 + reset_value: '0' + width: 1 + - FRE: + access: rw + description: Frame list rollover enable + lsb: 3 + reset_value: '0' + width: 1 + - AAE: + access: rw + description: Interrupt on asynchronous advance enable + lsb: 5 + reset_value: '0' + width: 1 + - SRE: + access: '' + description: SOF received enable + lsb: 7 + reset_value: '0' + width: 1 + - UAIE: + access: rw + description: USB host asynchronous interrupt enable + lsb: 18 + reset_value: '0' + width: 1 + - UPIA: + access: rw + description: USB host periodic interrupt enable + lsb: 19 + reset_value: '0' + width: 1 +- USB0_FRINDEX_D: + fields: !!omap + - FRINDEX2_0: + access: r + description: Current micro frame number + lsb: 0 + reset_value: '' + width: 3 + - FRINDEX13_3: + access: r + description: Current frame number of the last frame transmitted + lsb: 3 + reset_value: '' + width: 11 +- USB0_FRINDEX_H: + fields: !!omap + - FRINDEX2_0: + access: rw + description: Current micro frame number + lsb: 0 + reset_value: '' + width: 3 + - FRINDEX12_3: + access: rw + description: Frame list current index + lsb: 3 + reset_value: '' + width: 10 +- USB0_DEVICEADDR: + fields: !!omap + - USBADRA: + access: '' + description: Device address advance + lsb: 24 + reset_value: '0' + width: 1 + - USBADR: + access: rw + description: USB device address + lsb: 25 + reset_value: '0' + width: 7 +- USB0_PERIODICLISTBASE: + fields: !!omap + - PERBASE31_12: + access: rw + description: Base Address (Low) + lsb: 12 + reset_value: '' + width: 20 +- USB0_ENDPOINTLISTADDR: + fields: !!omap + - EPBASE31_11: + access: rw + description: Endpoint list pointer (low) + lsb: 11 + reset_value: '' + width: 21 +- USB0_ASYNCLISTADDR: + fields: !!omap + - ASYBASE31_5: + access: rw + description: Link pointer (Low) LPL + lsb: 5 + reset_value: '' + width: 27 +- USB0_TTCTRL: + fields: !!omap + - TTHA: + access: rw + description: Hub address when FS or LS device are connected directly + lsb: 24 + reset_value: '' + width: 7 +- USB0_BURSTSIZE: + fields: !!omap + - RXPBURST: + access: rw + description: Programmable RX burst length + lsb: 0 + reset_value: '0x10' + width: 8 + - TXPBURST: + access: rw + description: Programmable TX burst length + lsb: 8 + reset_value: '0x10' + width: 8 +- USB0_TXFILLTUNING: + fields: !!omap + - TXSCHOH: + access: rw + description: FIFO burst threshold + lsb: 0 + reset_value: '0x2' + width: 8 + - TXSCHEATLTH: + access: rw + description: Scheduler health counter + lsb: 8 + reset_value: '0x0' + width: 5 + - TXFIFOTHRES: + access: rw + description: Scheduler overhead + lsb: 16 + reset_value: '0x0' + width: 6 +- USB0_BINTERVAL: + fields: !!omap + - BINT: + access: rw + description: bInterval value + lsb: 0 + reset_value: '0x00' + width: 4 +- USB0_ENDPTNAK: + fields: !!omap + - EPRN: + access: rwc + description: Rx endpoint NAK + lsb: 0 + reset_value: '0x00' + width: 6 + - EPTN: + access: rwc + description: Tx endpoint NAK + lsb: 16 + reset_value: '0x00' + width: 6 +- USB0_ENDPTNAKEN: + fields: !!omap + - EPRNE: + access: rw + description: Rx endpoint NAK enable + lsb: 0 + reset_value: '0x00' + width: 6 + - EPTNE: + access: rw + description: Tx endpoint NAK + lsb: 16 + reset_value: '0x00' + width: 6 +- USB0_PORTSC1_D: + fields: !!omap + - CCS: + access: r + description: Current connect status + lsb: 0 + reset_value: '0' + width: 1 + - PE: + access: r + description: Port enable + lsb: 2 + reset_value: '1' + width: 1 + - PEC: + access: r + description: Port enable/disable change + lsb: 3 + reset_value: '0' + width: 1 + - FPR: + access: rw + description: Force port resume + lsb: 6 + reset_value: '0' + width: 1 + - SUSP: + access: r + description: Suspend + lsb: 7 + reset_value: '0' + width: 1 + - PR: + access: r + description: Port reset + lsb: 8 + reset_value: '0' + width: 1 + - HSP: + access: r + description: High-speed status + lsb: 9 + reset_value: '0' + width: 1 + - PIC1_0: + access: rw + description: Port indicator control + lsb: 14 + reset_value: '0' + width: 2 + - PTC3_0: + access: rw + description: Port test control + lsb: 16 + reset_value: '0' + width: 4 + - PHCD: + access: rw + description: PHY low power suspend - clock disable (PLPSCD) + lsb: 23 + reset_value: '0' + width: 1 + - PFSC: + access: rw + description: Port force full speed connect + lsb: 24 + reset_value: '0' + width: 1 + - PSPD: + access: r + description: Port speed + lsb: 26 + reset_value: '0' + width: 2 +- USB0_PORTSC1_H: + fields: !!omap + - CCS: + access: rwc + description: Current connect status + lsb: 0 + reset_value: '0' + width: 1 + - CSC: + access: rwc + description: Connect status change + lsb: 1 + reset_value: '0' + width: 1 + - PE: + access: rw + description: Port enable + lsb: 2 + reset_value: '0' + width: 1 + - PEC: + access: rwc + description: Port disable/enable change + lsb: 3 + reset_value: '0' + width: 1 + - OCA: + access: r + description: Over-current active + lsb: 4 + reset_value: '0' + width: 1 + - OCC: + access: rwc + description: Over-current change + lsb: 5 + reset_value: '0' + width: 1 + - FPR: + access: rw + description: Force port resume + lsb: 6 + reset_value: '0' + width: 1 + - SUSP: + access: rw + description: Suspend + lsb: 7 + reset_value: '0' + width: 1 + - PR: + access: rw + description: Port reset + lsb: 8 + reset_value: '0' + width: 1 + - HSP: + access: r + description: High-speed status + lsb: 9 + reset_value: '0' + width: 1 + - LS: + access: r + description: Line status + lsb: 10 + reset_value: '0x3' + width: 2 + - PP: + access: rw + description: Port power control + lsb: 12 + reset_value: '0' + width: 1 + - PIC1_0: + access: rw + description: Port indicator control + lsb: 14 + reset_value: '0' + width: 2 + - PTC3_0: + access: rw + description: Port test control + lsb: 16 + reset_value: '0' + width: 4 + - WKCN: + access: rw + description: Wake on connect enable (WKCNNT_E) + lsb: 20 + reset_value: '0' + width: 1 + - WKDC: + access: rw + description: Wake on disconnect enable (WKDSCNNT_E) + lsb: 21 + reset_value: '0' + width: 1 + - WKOC: + access: rw + description: Wake on over-current enable (WKOC_E) + lsb: 22 + reset_value: '0' + width: 1 + - PHCD: + access: rw + description: PHY low power suspend - clock disable (PLPSCD) + lsb: 23 + reset_value: '0' + width: 1 + - PFSC: + access: rw + description: Port force full speed connect + lsb: 24 + reset_value: '0' + width: 1 + - PSPD: + access: r + description: Port speed + lsb: 26 + reset_value: '0' + width: 2 +- USB0_OTGSC: + fields: !!omap + - VD: + access: rw + description: VBUS_Discharge + lsb: 0 + reset_value: '0' + width: 1 + - VC: + access: rw + description: VBUS_Charge + lsb: 1 + reset_value: '0' + width: 1 + - HAAR: + access: rw + description: Hardware assist auto_reset + lsb: 2 + reset_value: '0' + width: 1 + - OT: + access: rw + description: OTG termination + lsb: 3 + reset_value: '0' + width: 1 + - DP: + access: rw + description: Data pulsing + lsb: 4 + reset_value: '0' + width: 1 + - IDPU: + access: rw + description: ID pull-up + lsb: 5 + reset_value: '1' + width: 1 + - HADP: + access: rw + description: Hardware assist data pulse + lsb: 6 + reset_value: '0' + width: 1 + - HABA: + access: rw + description: Hardware assist B-disconnect to A-connect + lsb: 7 + reset_value: '0' + width: 1 + - ID: + access: r + description: USB ID + lsb: 8 + reset_value: '0' + width: 1 + - AVV: + access: r + description: A-VBUS valid + lsb: 9 + reset_value: '0' + width: 1 + - ASV: + access: r + description: A-session valid + lsb: 10 + reset_value: '0' + width: 1 + - BSV: + access: r + description: B-session valid + lsb: 11 + reset_value: '0' + width: 1 + - BSE: + access: r + description: B-session end + lsb: 12 + reset_value: '0' + width: 1 + - MS1T: + access: r + description: 1 millisecond timer toggle + lsb: 13 + reset_value: '0' + width: 1 + - DPS: + access: r + description: Data bus pulsing status + lsb: 14 + reset_value: '0' + width: 1 + - IDIS: + access: rwc + description: USB ID interrupt status + lsb: 16 + reset_value: '0' + width: 1 + - AVVIS: + access: rwc + description: A-VBUS valid interrupt status + lsb: 17 + reset_value: '0' + width: 1 + - ASVIS: + access: rwc + description: A-Session valid interrupt status + lsb: 18 + reset_value: '0' + width: 1 + - BSVIS: + access: rwc + description: B-Session valid interrupt status + lsb: 19 + reset_value: '0' + width: 1 + - BSEIS: + access: rwc + description: B-Session end interrupt status + lsb: 20 + reset_value: '0' + width: 1 + - MS1S: + access: rwc + description: 1 millisecond timer interrupt status + lsb: 21 + reset_value: '0' + width: 1 + - DPIS: + access: rwc + description: Data pulse interrupt status + lsb: 22 + reset_value: '0' + width: 1 + - IDIE: + access: rw + description: USB ID interrupt enable + lsb: 24 + reset_value: '0' + width: 1 + - AVVIE: + access: rw + description: A-VBUS valid interrupt enable + lsb: 25 + reset_value: '0' + width: 1 + - ASVIE: + access: rw + description: A-session valid interrupt enable + lsb: 26 + reset_value: '0' + width: 1 + - BSVIE: + access: rw + description: B-session valid interrupt enable + lsb: 27 + reset_value: '0' + width: 1 + - BSEIE: + access: rw + description: B-session end interrupt enable + lsb: 28 + reset_value: '0' + width: 1 + - MS1E: + access: rw + description: 1 millisecond timer interrupt enable + lsb: 29 + reset_value: '0' + width: 1 + - DPIE: + access: rw + description: Data pulse interrupt enable + lsb: 30 + reset_value: '0' + width: 1 +- USB0_USBMODE_D: + fields: !!omap + - CM1_0: + access: rwo + description: Controller mode + lsb: 0 + reset_value: '0' + width: 2 + - ES: + access: rw + description: Endian select + lsb: 2 + reset_value: '0' + width: 1 + - SLOM: + access: rw + description: Setup Lockout mode + lsb: 3 + reset_value: '0' + width: 1 + - SDIS: + access: rw + description: Setup Lockout mode + lsb: 4 + reset_value: '0' + width: 1 +- USB0_USBMODE_H: + fields: !!omap + - CM: + access: rwo + description: Controller mode + lsb: 0 + reset_value: '0' + width: 2 + - ES: + access: rw + description: Endian select + lsb: 2 + reset_value: '0' + width: 1 + - SDIS: + access: rw + description: Stream disable mode + lsb: 4 + reset_value: '0' + width: 1 + - VBPS: + access: rwo + description: VBUS power select + lsb: 5 + reset_value: '0' + width: 1 +- USB0_ENDPTSETUPSTAT: + fields: !!omap + - ENDPTSETUPSTAT: + access: rwc + description: Setup endpoint status for logical endpoints 0 to 5 + lsb: 0 + reset_value: '0' + width: 6 +- USB0_ENDPTPRIME: + fields: !!omap + - PERB: + access: rws + description: Prime endpoint receive buffer for physical OUT endpoints 5 to + 0 + lsb: 0 + reset_value: '0' + width: 6 + - PETB: + access: rws + description: Prime endpoint transmit buffer for physical IN endpoints 5 to + 0 + lsb: 16 + reset_value: '0' + width: 6 +- USB0_ENDPTFLUSH: + fields: !!omap + - FERB: + access: rwc + description: Flush endpoint receive buffer for physical OUT endpoints 5 to + 0 + lsb: 0 + reset_value: '0' + width: 6 + - FETB: + access: rwc + description: Flush endpoint transmit buffer for physical IN endpoints 5 to + 0 + lsb: 16 + reset_value: '0' + width: 6 +- USB0_ENDPTSTAT: + fields: !!omap + - ERBR: + access: r + description: Endpoint receive buffer ready for physical OUT endpoints 5 to + 0 + lsb: 0 + reset_value: '0' + width: 6 + - ETBR: + access: r + description: Endpoint transmit buffer ready for physical IN endpoints 3 to + 0 + lsb: 16 + reset_value: '0' + width: 6 +- USB0_ENDPTCOMPLETE: + fields: !!omap + - ERCE: + access: rwc + description: Endpoint receive complete event for physical OUT endpoints 5 + to 0 + lsb: 0 + reset_value: '0' + width: 6 + - ETCE: + access: rwc + description: Endpoint transmit complete event for physical IN endpoints 5 + to 0 + lsb: 16 + reset_value: '0' + width: 6 +- USB0_ENDPTCTRL0: + fields: !!omap + - RXS: + access: rw + description: Rx endpoint stall + lsb: 0 + reset_value: '0' + width: 1 + - RXT1_0: + access: rw + description: Endpoint type + lsb: 2 + reset_value: '0' + width: 2 + - RXE: + access: r + description: Rx endpoint enable + lsb: 7 + reset_value: '1' + width: 1 + - TXS: + access: rw + description: Tx endpoint stall + lsb: 16 + reset_value: '' + width: 1 + - TXT1_0: + access: r + description: Endpoint type + lsb: 18 + reset_value: '0' + width: 2 + - TXE: + access: r + description: Tx endpoint enable + lsb: 23 + reset_value: '1' + width: 1 +- USB0_ENDPTCTRL1: + fields: !!omap + - RXS: + access: rw + description: Rx endpoint stall + lsb: 0 + reset_value: '0' + width: 1 + - RXT: + access: rw + description: Endpoint type + lsb: 2 + reset_value: '0' + width: 2 + - RXI: + access: rw + description: Rx data toggle inhibit + lsb: 5 + reset_value: '0' + width: 1 + - RXR: + access: ws + description: Rx data toggle reset + lsb: 6 + reset_value: '0' + width: 1 + - RXE: + access: rw + description: Rx endpoint enable + lsb: 7 + reset_value: '0' + width: 1 + - TXS: + access: rw + description: Tx endpoint stall + lsb: 16 + reset_value: '0' + width: 1 + - TXT1_0: + access: r + description: Tx Endpoint type + lsb: 18 + reset_value: '0' + width: 2 + - TXI: + access: rw + description: Tx data toggle inhibit + lsb: 21 + reset_value: '0' + width: 1 + - TXR: + access: ws + description: Tx data toggle reset + lsb: 22 + reset_value: '1' + width: 1 + - TXE: + access: r + description: Tx endpoint enable + lsb: 23 + reset_value: '0' + width: 1 +- USB0_ENDPTCTRL2: + fields: !!omap + - RXS: + access: rw + description: Rx endpoint stall + lsb: 0 + reset_value: '0' + width: 1 + - RXT: + access: rw + description: Endpoint type + lsb: 2 + reset_value: '0' + width: 2 + - RXI: + access: rw + description: Rx data toggle inhibit + lsb: 5 + reset_value: '0' + width: 1 + - RXR: + access: ws + description: Rx data toggle reset + lsb: 6 + reset_value: '0' + width: 1 + - RXE: + access: rw + description: Rx endpoint enable + lsb: 7 + reset_value: '0' + width: 1 + - TXS: + access: rw + description: Tx endpoint stall + lsb: 16 + reset_value: '0' + width: 1 + - TXT1_0: + access: r + description: Tx Endpoint type + lsb: 18 + reset_value: '0' + width: 2 + - TXI: + access: rw + description: Tx data toggle inhibit + lsb: 21 + reset_value: '0' + width: 1 + - TXR: + access: ws + description: Tx data toggle reset + lsb: 22 + reset_value: '1' + width: 1 + - TXE: + access: r + description: Tx endpoint enable + lsb: 23 + reset_value: '0' + width: 1 +- USB0_ENDPTCTRL3: + fields: !!omap + - RXS: + access: rw + description: Rx endpoint stall + lsb: 0 + reset_value: '0' + width: 1 + - RXT: + access: rw + description: Endpoint type + lsb: 2 + reset_value: '0' + width: 2 + - RXI: + access: rw + description: Rx data toggle inhibit + lsb: 5 + reset_value: '0' + width: 1 + - RXR: + access: ws + description: Rx data toggle reset + lsb: 6 + reset_value: '0' + width: 1 + - RXE: + access: rw + description: Rx endpoint enable + lsb: 7 + reset_value: '0' + width: 1 + - TXS: + access: rw + description: Tx endpoint stall + lsb: 16 + reset_value: '0' + width: 1 + - TXT1_0: + access: r + description: Tx Endpoint type + lsb: 18 + reset_value: '0' + width: 2 + - TXI: + access: rw + description: Tx data toggle inhibit + lsb: 21 + reset_value: '0' + width: 1 + - TXR: + access: ws + description: Tx data toggle reset + lsb: 22 + reset_value: '1' + width: 1 + - TXE: + access: r + description: Tx endpoint enable + lsb: 23 + reset_value: '0' + width: 1 +- USB0_ENDPTCTRL4: + fields: !!omap + - RXS: + access: rw + description: Rx endpoint stall + lsb: 0 + reset_value: '0' + width: 1 + - RXT: + access: rw + description: Endpoint type + lsb: 2 + reset_value: '0' + width: 2 + - RXI: + access: rw + description: Rx data toggle inhibit + lsb: 5 + reset_value: '0' + width: 1 + - RXR: + access: ws + description: Rx data toggle reset + lsb: 6 + reset_value: '0' + width: 1 + - RXE: + access: rw + description: Rx endpoint enable + lsb: 7 + reset_value: '0' + width: 1 + - TXS: + access: rw + description: Tx endpoint stall + lsb: 16 + reset_value: '0' + width: 1 + - TXT1_0: + access: r + description: Tx Endpoint type + lsb: 18 + reset_value: '0' + width: 2 + - TXI: + access: rw + description: Tx data toggle inhibit + lsb: 21 + reset_value: '0' + width: 1 + - TXR: + access: ws + description: Tx data toggle reset + lsb: 22 + reset_value: '1' + width: 1 + - TXE: + access: r + description: Tx endpoint enable + lsb: 23 + reset_value: '0' + width: 1 +- USB0_ENDPTCTRL5: + fields: !!omap + - RXS: + access: rw + description: Rx endpoint stall + lsb: 0 + reset_value: '0' + width: 1 + - RXT: + access: rw + description: Endpoint type + lsb: 2 + reset_value: '0' + width: 2 + - RXI: + access: rw + description: Rx data toggle inhibit + lsb: 5 + reset_value: '0' + width: 1 + - RXR: + access: ws + description: Rx data toggle reset + lsb: 6 + reset_value: '0' + width: 1 + - RXE: + access: rw + description: Rx endpoint enable + lsb: 7 + reset_value: '0' + width: 1 + - TXS: + access: rw + description: Tx endpoint stall + lsb: 16 + reset_value: '0' + width: 1 + - TXT1_0: + access: r + description: Tx Endpoint type + lsb: 18 + reset_value: '0' + width: 2 + - TXI: + access: rw + description: Tx data toggle inhibit + lsb: 21 + reset_value: '0' + width: 1 + - TXR: + access: ws + description: Tx data toggle reset + lsb: 22 + reset_value: '1' + width: 1 + - TXE: + access: r + description: Tx endpoint enable + lsb: 23 + reset_value: '0' + width: 1 diff --git a/libopencm3/scripts/data/lpc43xx/yaml_odict.py b/libopencm3/scripts/data/lpc43xx/yaml_odict.py new file mode 100644 index 0000000..05aa269 --- /dev/null +++ b/libopencm3/scripts/data/lpc43xx/yaml_odict.py @@ -0,0 +1,81 @@ +import yaml +from collections import OrderedDict +def construct_odict(load, node): + """This is the same as SafeConstructor.construct_yaml_omap(), + except the data type is changed to OrderedDict() and setitem is + used instead of append in the loop. + + >>> yaml.load(''' + ... !!omap + ... - foo: bar + ... - mumble: quux + ... - baz: gorp + ... ''') + OrderedDict([('foo', 'bar'), ('mumble', 'quux'), ('baz', 'gorp')]) + + >>> yaml.load('''!!omap [ foo: bar, mumble: quux, baz : gorp ]''') + OrderedDict([('foo', 'bar'), ('mumble', 'quux'), ('baz', 'gorp')]) + """ + + omap = OrderedDict() + yield omap + if not isinstance(node, yaml.SequenceNode): + raise yaml.constructor.ConstructorError( + "while constructing an ordered map", + node.start_mark, + "expected a sequence, but found %s" % node.id, node.start_mark + ) + for subnode in node.value: + if not isinstance(subnode, yaml.MappingNode): + raise yaml.constructor.ConstructorError( + "while constructing an ordered map", node.start_mark, + "expected a mapping of length 1, but found %s" % subnode.id, + subnode.start_mark + ) + if len(subnode.value) != 1: + raise yaml.constructor.ConstructorError( + "while constructing an ordered map", node.start_mark, + "expected a single mapping item, but found %d items" % len(subnode.value), + subnode.start_mark + ) + key_node, value_node = subnode.value[0] + key = load.construct_object(key_node) + value = load.construct_object(value_node) + omap[key] = value + +yaml.add_constructor(u'tag:yaml.org,2002:omap', construct_odict) + +def repr_pairs(dump, tag, sequence, flow_style=None): + """This is the same code as BaseRepresenter.represent_sequence(), + but the value passed to dump.represent_data() in the loop is a + dictionary instead of a tuple.""" + + value = [] + node = yaml.SequenceNode(tag, value, flow_style=flow_style) + if dump.alias_key is not None: + dump.represented_objects[dump.alias_key] = node + best_style = True + for (key, val) in sequence: + item = dump.represent_data({key: val}) + if not (isinstance(item, yaml.ScalarNode) and not item.style): + best_style = False + value.append(item) + if flow_style is None: + if dump.default_flow_style is not None: + node.flow_style = dump.default_flow_style + else: + node.flow_style = best_style + return node + +def repr_odict(dumper, data): + """ + >>> data = OrderedDict([('foo', 'bar'), ('mumble', 'quux'), ('baz', 'gorp')]) + >>> yaml.dump(data, default_flow_style=False) + '!!omap\\n- foo: bar\\n- mumble: quux\\n- baz: gorp\\n' + >>> yaml.dump(data, default_flow_style=True) + '!!omap [foo: bar, mumble: quux, baz: gorp]\\n' + """ + return repr_pairs(dumper, u'tag:yaml.org,2002:omap', data.iteritems()) + +yaml.add_representer(OrderedDict, repr_odict) + |